summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/intel
AgeCommit message (Collapse)AuthorFilesLines
2025-04-10idpf: fix adapter NULL pointer dereference on rebootEmil Tantilov1-1/+5
[ Upstream commit 4c9106f4906a85f6b13542d862e423bcdc118cc3 ] With SRIOV enabled, idpf ends up calling into idpf_remove() twice. First via idpf_shutdown() and then again when idpf_remove() calls into sriov_disable(), because the VF devices use the idpf driver, hence the same remove routine. When that happens, it is possible for the adapter to be NULL from the first call to idpf_remove(), leading to a NULL pointer dereference. echo 1 > /sys/class/net/<netif>/device/sriov_numvfs reboot BUG: kernel NULL pointer dereference, address: 0000000000000020 ... RIP: 0010:idpf_remove+0x22/0x1f0 [idpf] ... ? idpf_remove+0x22/0x1f0 [idpf] ? idpf_remove+0x1e4/0x1f0 [idpf] pci_device_remove+0x3f/0xb0 device_release_driver_internal+0x19f/0x200 pci_stop_bus_device+0x6d/0x90 pci_stop_and_remove_bus_device+0x12/0x20 pci_iov_remove_virtfn+0xbe/0x120 sriov_disable+0x34/0xe0 idpf_sriov_configure+0x58/0x140 [idpf] idpf_remove+0x1b9/0x1f0 [idpf] idpf_shutdown+0x12/0x30 [idpf] pci_device_shutdown+0x35/0x60 device_shutdown+0x156/0x200 ... Replace the direct idpf_remove() call in idpf_shutdown() with idpf_vc_core_deinit() and idpf_deinit_dflt_mbx(), which perform the bulk of the cleanup, such as stopping the init task, freeing IRQs, destroying the vports and freeing the mailbox. This avoids the calls to sriov_disable() in addition to a small netdev cleanup, and destroying workqueues, which don't seem to be required on shutdown. Reported-by: Yuying Ma <yuma@redhat.com> Fixes: e850efed5e15 ("idpf: add module register and probe functionality") Reviewed-by: Madhu Chittim <madhu.chittim@intel.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Samuel Salin <Samuel.salin@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-04-10e1000e: change k1 configuration on MTP and later platformsVitaly Lifshits3-5/+82
[ Upstream commit efaaf344bc2917cbfa5997633bc18a05d3aed27f ] Starting from Meteor Lake, the Kumeran interface between the integrated MAC and the I219 PHY works at a different frequency. This causes sporadic MDI errors when accessing the PHY, and in rare circumstances could lead to packet corruption. To overcome this, introduce minor changes to the Kumeran idle state (K1) parameters during device initialization. Hardware reset reverts this configuration, therefore it needs to be applied in a few places. Fixes: cc23f4f0b6b9 ("e1000e: Add support for Meteor Lake") Signed-off-by: Vitaly Lifshits <vitaly.lifshits@intel.com> Tested-by: Avigail Dahan <avigailx.dahan@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-03-22ice: Fix switchdev slow-path in LAGMarcin Szycik2-1/+30
[ Upstream commit dce97cb0a3e34204c0b99345418a714eac85953f ] Ever since removing switchdev control VSI and using PF for port representor Tx/Rx, switchdev slow-path has been working improperly after failover in SR-IOV LAG. LAG assumes that the first uplink to be added to the aggregate will own VFs and have switchdev configured. After failing-over to the other uplink, representors are still configured to Tx through the uplink they are set up on, which fails because that uplink is now down. On failover, update all PRs on primary uplink to use the currently active uplink for Tx. Call netif_keep_dst(), as the secondary uplink might not be in switchdev mode. Also make sure to call ice_eswitch_set_target_vsi() if uplink is in LAG. On the Rx path, representors are already working properly, because default Tx from VFs is set to PF owning the eswitch. After failover the same PF is receiving traffic from VFs, even though link is down. Fixes: defd52455aee ("ice: do Tx through PF netdev in slow-path") Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-03-22ice: fix memory leak in aRFS after resetGrzegorz Nitka1-1/+1
[ Upstream commit 23d97f18901ef5e4e264e3b1777fe65c760186b5 ] Fix aRFS (accelerated Receive Flow Steering) structures memory leak by adding a checker to verify if aRFS memory is already allocated while configuring VSI. aRFS objects are allocated in two cases: - as part of VSI initialization (at probe), and - as part of reset handling However, VSI reconfiguration executed during reset involves memory allocation one more time, without prior releasing already allocated resources. This led to the memory leak with the following signature: [root@os-delivery ~]# cat /sys/kernel/debug/kmemleak unreferenced object 0xff3c1ca7252e6000 (size 8192): comm "kworker/0:0", pid 8, jiffies 4296833052 hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace (crc 0): [<ffffffff991ec485>] __kmalloc_cache_noprof+0x275/0x340 [<ffffffffc0a6e06a>] ice_init_arfs+0x3a/0xe0 [ice] [<ffffffffc09f1027>] ice_vsi_cfg_def+0x607/0x850 [ice] [<ffffffffc09f244b>] ice_vsi_setup+0x5b/0x130 [ice] [<ffffffffc09c2131>] ice_init+0x1c1/0x460 [ice] [<ffffffffc09c64af>] ice_probe+0x2af/0x520 [ice] [<ffffffff994fbcd3>] local_pci_probe+0x43/0xa0 [<ffffffff98f07103>] work_for_cpu_fn+0x13/0x20 [<ffffffff98f0b6d9>] process_one_work+0x179/0x390 [<ffffffff98f0c1e9>] worker_thread+0x239/0x340 [<ffffffff98f14abc>] kthread+0xcc/0x100 [<ffffffff98e45a6d>] ret_from_fork+0x2d/0x50 [<ffffffff98e083ba>] ret_from_fork_asm+0x1a/0x30 ... Fixes: 28bf26724fdb ("ice: Implement aRFS") Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-03-22ice: do not configure destination override for switchdevLarysa Zaremba3-28/+0
[ Upstream commit 3be83ee9de0298f8321aa0b148d8f9995102e40f ] After switchdev is enabled and disabled later, LLDP packets sending stops, despite working perfectly fine before and during switchdev state. To reproduce (creating/destroying VF is what triggers the reconfiguration): devlink dev eswitch set pci/<address> mode switchdev echo '2' > /sys/class/net/<ifname>/device/sriov_numvfs echo '0' > /sys/class/net/<ifname>/device/sriov_numvfs This happens because LLDP relies on the destination override functionality. It needs to 1) set a flag in the descriptor, 2) set the VSI permission to make it valid. The permissions are set when the PF VSI is first configured, but switchdev then enables it for the uplink VSI (which is always the PF) once more when configured and disables when deconfigured, which leads to software-generated LLDP packets being blocked. Do not modify the destination override permissions when configuring switchdev, as the enabled state is the default configuration that is never modified. Fixes: 1a1c40df2e80 ("ice: set and release switchdev environment") Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-03-07idpf: fix checksums set in idpf_rx_rsc()Eric Dumazet1-1/+2
[ Upstream commit 674fcb4f4a7e3e277417a01788cc6daae47c3804 ] idpf_rx_rsc() uses skb_transport_offset(skb) while the transport header is not set yet. This triggers the following warning for CONFIG_DEBUG_NET=y builds. DEBUG_NET_WARN_ON_ONCE(!skb_transport_header_was_set(skb)) [ 69.261620] WARNING: CPU: 7 PID: 0 at ./include/linux/skbuff.h:3020 idpf_vport_splitq_napi_poll (include/linux/skbuff.h:3020) idpf [ 69.261629] Modules linked in: vfat fat dummy bridge intel_uncore_frequency_tpmi intel_uncore_frequency_common intel_vsec_tpmi idpf intel_vsec cdc_ncm cdc_eem cdc_ether usbnet mii xhci_pci xhci_hcd ehci_pci ehci_hcd libeth [ 69.261644] CPU: 7 UID: 0 PID: 0 Comm: swapper/7 Tainted: G S W 6.14.0-smp-DEV #1697 [ 69.261648] Tainted: [S]=CPU_OUT_OF_SPEC, [W]=WARN [ 69.261650] RIP: 0010:idpf_vport_splitq_napi_poll (include/linux/skbuff.h:3020) idpf [ 69.261677] ? __warn (kernel/panic.c:242 kernel/panic.c:748) [ 69.261682] ? idpf_vport_splitq_napi_poll (include/linux/skbuff.h:3020) idpf [ 69.261687] ? report_bug (lib/bug.c:?) [ 69.261690] ? handle_bug (arch/x86/kernel/traps.c:285) [ 69.261694] ? exc_invalid_op (arch/x86/kernel/traps.c:309) [ 69.261697] ? asm_exc_invalid_op (arch/x86/include/asm/idtentry.h:621) [ 69.261700] ? __pfx_idpf_vport_splitq_napi_poll (drivers/net/ethernet/intel/idpf/idpf_txrx.c:4011) idpf [ 69.261704] ? idpf_vport_splitq_napi_poll (include/linux/skbuff.h:3020) idpf [ 69.261708] ? idpf_vport_splitq_napi_poll (drivers/net/ethernet/intel/idpf/idpf_txrx.c:3072) idpf [ 69.261712] __napi_poll (net/core/dev.c:7194) [ 69.261716] net_rx_action (net/core/dev.c:7265) [ 69.261718] ? __qdisc_run (net/sched/sch_generic.c:293) [ 69.261721] ? sched_clock (arch/x86/include/asm/preempt.h:84 arch/x86/kernel/tsc.c:288) [ 69.261726] handle_softirqs (kernel/softirq.c:561) Fixes: 3a8845af66edb ("idpf: add RX splitq napi poll support") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Alan Brady <alan.brady@intel.com> Cc: Joshua Hay <joshua.a.hay@intel.com> Cc: Willem de Bruijn <willemb@google.com> Acked-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Link: https://patch.msgid.link/20250226221253.1927782-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-03-07ice: Avoid setting default Rx VSI twice in switchdev setupMarcin Szycik1-2/+1
[ Upstream commit 5c07be96d8b3f8447e980f29b967bf2e1d7ac732 ] As part of switchdev environment setup, uplink VSI is configured as default for both Tx and Rx. Default Rx VSI is also used by promiscuous mode. If promisc mode is enabled and an attempt to enter switchdev mode is made, the setup will fail because Rx VSI is already configured as default (rule exists). Reproducer: devlink dev eswitch set $PF1_PCI mode switchdev ip l s $PF1 up ip l s $PF1 promisc on echo 1 > /sys/class/net/$PF1/device/sriov_numvfs In switchdev setup, use ice_set_dflt_vsi() instead of plain ice_cfg_dflt_vsi(), which avoids repeating setting default VSI for Rx if it's already configured. Fixes: 50d62022f455 ("ice: default Tx rule instead of to queue") Reported-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Closes: https://lore.kernel.org/intel-wired-lan/PH0PR11MB50138B635F2E5CEB7075325D961F2@PH0PR11MB5013.namprd11.prod.outlook.com Reviewed-by: Martyna Szapar-Mudlaw <martyna.szapar-mudlaw@linux.intel.com> Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://patch.msgid.link/20250224190647.3601930-3-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-03-07ice: Fix deinitializing VF in error pathMarcin Szycik3-4/+10
[ Upstream commit 79990cf5e7aded76d0c092c9f5ed31eb1c75e02c ] If ice_ena_vfs() fails after calling ice_create_vf_entries(), it frees all VFs without removing them from snapshot PF-VF mailbox list, leading to list corruption. Reproducer: devlink dev eswitch set $PF1_PCI mode switchdev ip l s $PF1 up ip l s $PF1 promisc on sleep 1 echo 1 > /sys/class/net/$PF1/device/sriov_numvfs sleep 1 echo 1 > /sys/class/net/$PF1/device/sriov_numvfs Trace (minimized): list_add corruption. next->prev should be prev (ffff8882e241c6f0), but was 0000000000000000. (next=ffff888455da1330). kernel BUG at lib/list_debug.c:29! RIP: 0010:__list_add_valid_or_report+0xa6/0x100 ice_mbx_init_vf_info+0xa7/0x180 [ice] ice_initialize_vf_entry+0x1fa/0x250 [ice] ice_sriov_configure+0x8d7/0x1520 [ice] ? __percpu_ref_switch_mode+0x1b1/0x5d0 ? __pfx_ice_sriov_configure+0x10/0x10 [ice] Sometimes a KASAN report can be seen instead with a similar stack trace: BUG: KASAN: use-after-free in __list_add_valid_or_report+0xf1/0x100 VFs are added to this list in ice_mbx_init_vf_info(), but only removed in ice_free_vfs(). Move the removing to ice_free_vf_entries(), which is also being called in other places where VFs are being removed (including ice_free_vfs() itself). Fixes: 8cd8a6b17d27 ("ice: move VF overflow message count into struct ice_mbx_vf_info") Reported-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Closes: https://lore.kernel.org/intel-wired-lan/PH0PR11MB50138B635F2E5CEB7075325D961F2@PH0PR11MB5013.namprd11.prod.outlook.com Reviewed-by: Martyna Szapar-Mudlaw <martyna.szapar-mudlaw@linux.intel.com> Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://patch.msgid.link/20250224190647.3601930-2-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-21igc: Set buffer type for empty frames in igc_init_empty_frameSong Yoong Siang1-0/+1
commit 63f20f00d23d569e4e67859b4e8dcc9de79221cb upstream. Set the buffer type to IGC_TX_BUFFER_TYPE_SKB for empty frame in the igc_init_empty_frame function. This ensures that the buffer type is correctly identified and handled during Tx ring cleanup. Fixes: db0b124f02ba ("igc: Enhance Qbv scheduling by using first flag bit") Cc: stable@vger.kernel.org # 6.2+ Signed-off-by: Song Yoong Siang <yoong.siang.song@intel.com> Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-21igc: Fix HW RX timestamp when passed by ZC XDPZdenek Bouska1-9/+12
[ Upstream commit 7822dd4d6d4bebca5045a395e1784ef09cae2d43 ] Fixes HW RX timestamp in the following scenario: - AF_PACKET socket with enabled HW RX timestamps is created - AF_XDP socket with enabled zero copy is created - frame is forwarded to the BPF program, where the timestamp should still be readable (extracted by igc_xdp_rx_timestamp(), kfunc behind bpf_xdp_metadata_rx_timestamp()) - the frame got XDP_PASS from BPF program, redirecting to the stack - AF_PACKET socket receives the frame with HW RX timestamp Moves the skb timestamp setting from igc_dispatch_skb_zc() to igc_construct_skb_zc() so that igc_construct_skb_zc() is similar to igc_construct_skb(). This issue can also be reproduced by running: # tools/testing/selftests/bpf/xdp_hw_metadata enp1s0 When a frame with the wrong port 9092 (instead of 9091) is used: # echo -n xdp | nc -u -q1 192.168.10.9 9092 then the RX timestamp is missing and xdp_hw_metadata prints: skb hwtstamp is not found! With this fix or when copy mode is used: # tools/testing/selftests/bpf/xdp_hw_metadata -c enp1s0 then RX timestamp is found and xdp_hw_metadata prints: found skb hwtstamp = 1736509937.852786132 Fixes: 069b142f5819 ("igc: Add support for PTP .getcyclesx64()") Signed-off-by: Zdenek Bouska <zdenek.bouska@siemens.com> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Florian Bezdeka <florian.bezdeka@siemens.com> Reviewed-by: Song Yoong Siang <yoong.siang.song@intel.com> Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-21idpf: call set_real_num_queues in idpf_openJoshua Hay1-0/+5
[ Upstream commit 52c11d31b5a1d1c747bb5f36cc4808e93e2348f4 ] On initial driver load, alloc_etherdev_mqs is called with whatever max queue values are provided by the control plane. However, if the driver is loaded on a system where num_online_cpus() returns less than the max queues, the netdev will think there are more queues than are actually available. Only num_online_cpus() will be allocated, but skb_get_queue_mapping(skb) could possibly return an index beyond the range of allocated queues. Consequently, the packet is silently dropped and it appears as if TX is broken. Set the real number of queues during open so the netdev knows how many queues will be allocated. Fixes: 1c325aac10a8 ("idpf: configure resources for TX queues") Signed-off-by: Joshua Hay <joshua.a.hay@intel.com> Reviewed-by: Madhu Chittim <madhu.chittim@intel.com> Tested-by: Samuel Salin <Samuel.salin@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-21idpf: record rx queue in skb for RSC packetsSridhar Samudrala1-2/+1
[ Upstream commit 2ff66c2f9ea4e9311e9a00004348b6c465bd5d3b ] Move the call to skb_record_rx_queue in idpf_rx_process_skb_fields() so that RX queue is recorded for RSC packets too. Fixes: 90912f9f4f2d ("idpf: convert header split mode to libeth + napi_build_skb()") Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Reviewed-by: Madhu Chittim <madhu.chittim@intel.com> Tested-by: Samuel Salin <Samuel.salin@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-21idpf: fix handling rsc packet with a single segmentSridhar Samudrala1-2/+0
[ Upstream commit 69ab25a74e2df53edc2de4acfce0a484bdb88155 ] Handle rsc packet with a single segment same as a multi segment rsc packet so that CHECKSUM_PARTIAL is set in the skb->ip_summed field. The current code is passing CHECKSUM_NONE resulting in TCP GRO layer doing checksum in SW and hiding the issue. This will fail when using dmabufs as payload buffers as skb frag would be unreadable. Fixes: 3a8845af66ed ("idpf: add RX splitq napi poll support") Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Tested-by: Samuel Salin <Samuel.salin@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-17ice: Add check for devm_kzalloc()Jiasheng Jiang1-0/+3
[ Upstream commit a8aa6a6ddce9b5585f2b74f27f3feea1427fb4e7 ] Add check for the return value of devm_kzalloc() to guarantee the success of allocation. Fixes: 42c2eb6b1f43 ("ice: Implement devlink-rate API") Signed-off-by: Jiasheng Jiang <jiashengjiangcool@gmail.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Link: https://patch.msgid.link/20250131013832.24805-1-jiashengjiangcool@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-17ice: stop storing XDP verdict within ice_rx_bufMaciej Fijalkowski3-70/+36
[ Upstream commit 468a1952df78f65c5991b7ac885c8b5b7dd87bab ] Idea behind having ice_rx_buf::act was to simplify and speed up the Rx data path by walking through buffers that were representing cleaned HW Rx descriptors. Since it caused us a major headache recently and we rolled back to old approach that 'puts' Rx buffers right after running XDP prog/creating skb, this is useless now and should be removed. Get rid of ice_rx_buf::act and related logic. We still need to take care of a corner case where XDP program releases a particular fragment. Make ice_run_xdp() to return its result and use it within ice_put_rx_mbuf(). Fixes: 2fba7dc5157b ("ice: Add support for XDP multi-buffer on Rx side") Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-17ice: gather page_count()'s of each frag right before XDP prog callMaciej Fijalkowski1-1/+26
[ Upstream commit 11c4aa074d547d825b19cd8d9f288254d89d805c ] If we store the pgcnt on few fragments while being in the middle of gathering the whole frame and we stumbled upon DD bit not being set, we terminate the NAPI Rx processing loop and come back later on. Then on next NAPI execution we work on previously stored pgcnt. Imagine that second half of page was used actively by networking stack and by the time we came back, stack is not busy with this page anymore and decremented the refcnt. The page reuse algorithm in this case should be good to reuse the page but given the old refcnt it will not do so and attempt to release the page via page_frag_cache_drain() with pagecnt_bias used as an arg. This in turn will result in negative refcnt on struct page, which was initially observed by Xu Du. Therefore, move the page count storage from ice_get_rx_buf() to a place where we are sure that whole frame has been collected, but before calling XDP program as it internally can also change the page count of fragments belonging to xdp_buff. Fixes: ac0753391195 ("ice: Store page count inside ice_rx_buf") Reported-and-tested-by: Xu Du <xudu@redhat.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Co-developed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-17ice: put Rx buffers after being done with current frameMaciej Fijalkowski1-29/+50
[ Upstream commit 743bbd93cf29f653fae0e1416a31f03231689911 ] Introduce a new helper ice_put_rx_mbuf() that will go through gathered frags from current frame and will call ice_put_rx_buf() on them. Current logic that was supposed to simplify and optimize the driver where we go through a batch of all buffers processed in current NAPI instance turned out to be broken for jumbo frames and very heavy load that was coming from both multi-thread iperf and nginx/wrk pair between server and client. The delay introduced by approach that we are dropping is simply too big and we need to take the decision regarding page recycling/releasing as quick as we can. While at it, address an error path of ice_add_xdp_frag() - we were missing buffer putting from day 1 there. As a nice side effect we get rid of annoying and repetitive three-liner: xdp->data = NULL; rx_ring->first_desc = ntc; rx_ring->nr_frags = 0; by embedding it within introduced routine. Fixes: 1dc1a7e7f410 ("ice: Centrallize Rx buffer recycling") Reported-and-tested-by: Xu Du <xudu@redhat.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Co-developed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-08iavf: allow changing VLAN state without calling PFMichal Swiatkowski1-2/+17
[ Upstream commit ee7d79433d783346430ee32f28c9df44a88b3bb6 ] First case: > ip l a l $VF name vlanx type vlan id 100 > ip l d vlanx > ip l a l $VF name vlanx type vlan id 100 As workqueue can be execute after sometime, there is a window to have call trace like that: - iavf_del_vlan - iavf_add_vlan - iavf_del_vlans (wq) It means that our VLAN 100 will change the state from IAVF_VLAN_ACTIVE to IAVF_VLAN_REMOVE (iavf_del_vlan). After that in iavf_add_vlan state won't be changed because VLAN 100 is on the filter list. The final result is that the VLAN 100 filter isn't added in hardware (no iavf_add_vlans call). To fix that change the state if the filter wasn't removed yet directly to active. It is save as IAVF_VLAN_REMOVE means that virtchnl message wasn't sent yet. Second case: > ip l a l $VF name vlanx type vlan id 100 Any type of VF reset ex. change trust > ip l s $PF vf $VF_NUM trust on > ip l d vlanx > ip l a l $VF name vlanx type vlan id 100 In case of reset iavf driver is responsible for readding all filters that are being used. To do that all VLAN filters state are changed to IAVF_VLAN_ADD. Here is even longer window for changing VLAN state from kernel side, as workqueue isn't called immediately. We can have call trace like that: - changing to IAVF_VLAN_ADD (after reset) - iavf_del_vlan (called from kernel ops) - iavf_del_vlans (wq) Not exsisitng VLAN filters will be removed from hardware. It isn't a bug, ice driver will handle it fine. However, we can have call trace like that: - changing to IAVF_VLAN_ADD (after reset) - iavf_del_vlan (called from kernel ops) - iavf_add_vlan (called from kernel ops) - iavf_del_vlans (wq) With fix for previous case we end up with no VLAN filters in hardware. We have to remove VLAN filters if the state is IAVF_VLAN_ADD and delete VLAN was called. It is save as IAVF_VLAN_ADD means that virtchnl message wasn't sent yet. Fixes: 0c0da0e95105 ("iavf: refactor VLAN filter states") Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-08ice: remove invalid parameter of equalizerMateusz Polchlopek3-3/+0
[ Upstream commit c5cc2a27e04f2fcd77c74ada9aef76a758a24697 ] It occurred that in the commit 70838938e89c ("ice: Implement driver functionality to dump serdes equalizer values") the invalid DRATE parameter for reading has been added. The output of the command: $ ethtool -d <ethX> returns the garbage value in the place where DRATE value should be stored. Remove mentioned parameter to prevent return of corrupted data to userspace. Fixes: 70838938e89c ("ice: Implement driver functionality to dump serdes equalizer values") Signed-off-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-08ice: fix ice_parser_rt::bst_key array sizePrzemek Kitszel2-11/+7
[ Upstream commit 18625e26fefced78f2ae28b25e80a07079821e04 ] Fix &ice_parser_rt::bst_key size. It was wrongly set to 10 instead of 20 in the initial impl commit (see Fixes tag). All usage code assumed it was of size 20. That was also the initial size present up to v2 of the intro series [2], but halved by v3 [3] refactor described as "Replace magic hardcoded values with macros." The introducing series was so big that some ugliness was unnoticed, same for bugs :/ ICE_BST_KEY_TCAM_SIZE and ICE_BST_TCAM_KEY_SIZE were differing by one. There was tmp variable @j in the scope of edited function, but was not used in all places. This ugliness is now gone. I'm moving ice_parser_rt::pg_prio a few positions up, to fill up one of the holes in order to compensate for the added 10 bytes to the ::bst_key, resulting in the same size of the whole as prior to the fix, and minimal changes in the offsets of the fields. Extend also the debug dump print of the key to cover all bytes. To not have string with 20 "%02x" and 20 params, switch to ice_debug_array_w_prefix(). This fix obsoletes Ahmed's attempt at [1]. [1] https://lore.kernel.org/intel-wired-lan/20240823230847.172295-1-ahmed.zaki@intel.com [2] https://lore.kernel.org/intel-wired-lan/20230605054641.2865142-13-junfeng.guo@intel.com [3] https://lore.kernel.org/intel-wired-lan/20230817093442.2576997-13-junfeng.guo@intel.com Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/intel-wired-lan/b1fb6ff9-b69e-4026-9988-3c783d86c2e0@stanley.mountain Fixes: 9a4c07aaa0f5 ("ice: add parser execution main loop") CC: Ahmed Zaki <ahmed.zaki@intel.com> Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com> Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-08idpf: convert workqueues to unboundMarco Leogrande1-5/+10
[ Upstream commit 9a5b021cb8186f1854bac2812bd4f396bb1e881c ] When a workqueue is created with `WQ_UNBOUND`, its work items are served by special worker-pools, whose host workers are not bound to any specific CPU. In the default configuration (i.e. when `queue_delayed_work` and friends do not specify which CPU to run the work item on), `WQ_UNBOUND` allows the work item to be executed on any CPU in the same node of the CPU it was enqueued on. While this solution potentially sacrifices locality, it avoids contention with other processes that might dominate the CPU time of the processor the work item was scheduled on. This is not just a theoretical problem: in a particular scenario misconfigured process was hogging most of the time from CPU0, leaving less than 0.5% of its CPU time to the kworker. The IDPF workqueues that were using the kworker on CPU0 suffered large completion delays as a result, causing performance degradation, timeouts and eventual system crash. Tested: * I have also run a manual test to gauge the performance improvement. The test consists of an antagonist process (`./stress --cpu 2`) consuming as much of CPU 0 as possible. This process is run under `taskset 01` to bind it to CPU0, and its priority is changed with `chrt -pQ 9900 10000 ${pid}` and `renice -n -20 ${pid}` after start. Then, the IDPF driver is forced to prefer CPU0 by editing all calls to `queue_delayed_work`, `mod_delayed_work`, etc... to use CPU 0. Finally, `ktraces` for the workqueue events are collected. Without the current patch, the antagonist process can force arbitrary delays between `workqueue_queue_work` and `workqueue_execute_start`, that in my tests were as high as `30ms`. With the current patch applied, the workqueue can be migrated to another unloaded CPU in the same node, and, keeping everything else equal, the maximum delay I could see was `6us`. Fixes: 0fe45467a104 ("idpf: add create vport and netdev configuration") Signed-off-by: Marco Leogrande <leogrande@google.com> Signed-off-by: Manoj Vishwanathan <manojvishy@google.com> Signed-off-by: Brian Vazquez <brianvv@google.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-08idpf: Acquire the lock before accessing the xn->saltManoj Vishwanathan1-1/+2
[ Upstream commit d15fe4edd7decdf14d8ad2b78df100ea23302065 ] The transaction salt was being accessed before acquiring the idpf_vc_xn_lock when idpf has to forward the virtchnl reply. Fixes: 34c21fa894a1 ("idpf: implement virtchnl transaction manager") Signed-off-by: Manoj Vishwanathan <manojvishy@google.com> Signed-off-by: David Decotigny <decot@google.com> Signed-off-by: Brian Vazquez <brianvv@google.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-08idpf: fix transaction timeouts on resetEmil Tantilov1-1/+10
[ Upstream commit 137da75ba72593598898a4e79da34f4b2da5d151 ] Restore the call to idpf_vc_xn_shutdown() at the beginning of idpf_vc_core_deinit() provided the function is not called on remove. In the reset path the mailbox is destroyed, leading to all transactions timing out. Fixes: 09d0fb5cb30e ("idpf: deinit virtchnl transaction manager after vport and vectors") Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-08idpf: add read memory barrier when checking descriptor done bitEmil Tantilov1-0/+6
[ Upstream commit 396f0165672c6a74d7379027d344b83b5f05948c ] Add read memory barrier to ensure the order of operations when accessing control queue descriptors. Specifically, we want to avoid cases where loads can be reordered: 1. Load #1 is dispatched to read descriptor flags. 2. Load #2 is dispatched to read some other field from the descriptor. 3. Load #2 completes, accessing memory/cache at a point in time when the DD flag is zero. 4. NIC DMA overwrites the descriptor, now the DD flag is one. 5. Any fields loaded before step 4 are now inconsistent with the actual descriptor state. Add read memory barrier between steps 1 and 2, so that load #2 is not executed until load #1 has completed. Fixes: 8077c727561a ("idpf: add controlq init and reset checks") Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Suggested-by: Lance Richardson <rlance@google.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-01-13ice: Add correct PHY lane assignmentKarol Kolacinski8-45/+68
Driver always naively assumes, that for PTP purposes, PHY lane to configure is corresponding to PF ID. This is not true for some port configurations, e.g.: - 2x50G per quad, where lanes used are 0 and 2 on each quad, but PF IDs are 0 and 1 - 100G per quad on 2 quads, where lanes used are 0 and 4, but PF IDs are 0 and 1 Use correct PHY lane assignment by getting and parsing port options. This is read from the NVM by the FW and provided to the driver with the indication of active port split. Remove ice_is_muxed_topo(), which is no longer needed. Fixes: 4409ea1726cb ("ice: Adjust PTP init for 2x50G E825C devices") Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Arkadiusz Kubalewski <Arkadiusz.kubalewski@intel.com> Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com> Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-01-13ice: Fix ETH56G FC-FEC Rx offset valueKarol Kolacinski1-1/+1
Fix ETH56G FC-FEC incorrect Rx offset value by changing it from -255.96 to -469.26 ns. Those values are derived from HW spec and reflect internal delays. Hex value is a fixed point representation in Q23.9 format. Fixes: 7cab44f1c35f ("ice: Introduce ETH56G PHY model for E825C products") Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-01-13ice: Fix quad registers read on E825Karol Kolacinski2-87/+133
Quad registers are read/written incorrectly. E825 devices always use quad 0 address and differentiate between the PHYs by changing SBQ destination device (phy_0 or phy_0_peer). Add helpers for reading/writing PTP registers shared per quad and use correct quad address and SBQ destination device based on port. Fixes: 7cab44f1c35f ("ice: Introduce ETH56G PHY model for E825C products") Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com> Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-01-13ice: Fix E825 initializationKarol Kolacinski1-13/+9
Current implementation checks revision of all PHYs on all PFs, which is incorrect and may result in initialization failure. Check only the revision of the current PHY. Fixes: 7cab44f1c35f ("ice: Introduce ETH56G PHY model for E825C products") Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com> Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-01-07igc: return early when failing to read EECD registerEn-Wei Wu1-0/+6
When booting with a dock connected, the igc driver may get stuck for ~40 seconds if PCIe link is lost during initialization. This happens because the driver access device after EECD register reads return all F's, indicating failed reads. Consequently, hw->hw_addr is set to NULL, which impacts subsequent rd32() reads. This leads to the driver hanging in igc_get_hw_semaphore_i225(), as the invalid hw->hw_addr prevents retrieving the expected value. To address this, a validation check and a corresponding return value catch is added for the EECD register read result. If all F's are returned, indicating PCIe link loss, the driver will return -ENXIO immediately. This avoids the 40-second hang and significantly improves boot time when using a dock with an igc NIC. Log before the patch: [ 0.911913] igc 0000:70:00.0: enabling device (0000 -> 0002) [ 0.912386] igc 0000:70:00.0: PTM enabled, 4ns granularity [ 1.571098] igc 0000:70:00.0 (unnamed net_device) (uninitialized): PCIe link lost, device now detached [ 43.449095] igc_get_hw_semaphore_i225: igc 0000:70:00.0 (unnamed net_device) (uninitialized): Driver can't access device - SMBI bit is set. [ 43.449186] igc 0000:70:00.0: probe with driver igc failed with error -13 [ 46.345701] igc 0000:70:00.0: enabling device (0000 -> 0002) [ 46.345777] igc 0000:70:00.0: PTM enabled, 4ns granularity Log after the patch: [ 1.031000] igc 0000:70:00.0: enabling device (0000 -> 0002) [ 1.032097] igc 0000:70:00.0: PTM enabled, 4ns granularity [ 1.642291] igc 0000:70:00.0 (unnamed net_device) (uninitialized): PCIe link lost, device now detached [ 5.480490] igc 0000:70:00.0: enabling device (0000 -> 0002) [ 5.480516] igc 0000:70:00.0: PTM enabled, 4ns granularity Fixes: ab4056126813 ("igc: Add NVM support") Cc: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com> Signed-off-by: En-Wei Wu <en-wei.wu@canonical.com> Reviewed-by: Vitaly Lifshits <vitaly.lifshits@intel.com> Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-01-07ice: fix incorrect PHY settings for 100 GB/sPrzemyslaw Korba1-2/+2
ptp4l application reports too high offset when ran on E823 device with a 100GB/s link. Those values cannot go under 100ns, like in a working case when using 100 GB/s cable. This is due to incorrect frequency settings on the PHY clocks for 100 GB/s speed. Changes are introduced to align with the internal hardware documentation, and correctly initialize frequency in PHY clocks with the frequency values that are in our HW spec. To reproduce the issue run ptp4l as a Time Receiver on E823 device, and observe the offset, which will never approach values seen in the PTP working case. Reproduction output: ptp4l -i enp137s0f3 -m -2 -s -f /etc/ptp4l_8275.conf ptp4l[5278.775]: master offset 12470 s2 freq +41288 path delay -3002 ptp4l[5278.837]: master offset 10525 s2 freq +39202 path delay -3002 ptp4l[5278.900]: master offset -24840 s2 freq -20130 path delay -3002 ptp4l[5278.963]: master offset 10597 s2 freq +37908 path delay -3002 ptp4l[5279.025]: master offset 8883 s2 freq +36031 path delay -3002 ptp4l[5279.088]: master offset 7267 s2 freq +34151 path delay -3002 ptp4l[5279.150]: master offset 5771 s2 freq +32316 path delay -3002 ptp4l[5279.213]: master offset 4388 s2 freq +30526 path delay -3002 ptp4l[5279.275]: master offset -30434 s2 freq -28485 path delay -3002 ptp4l[5279.338]: master offset -28041 s2 freq -27412 path delay -3002 ptp4l[5279.400]: master offset 7870 s2 freq +31118 path delay -3002 Fixes: 3a7496234d17 ("ice: implement basic E822 PTP support") Reviewed-by: Milena Olech <milena.olech@intel.com> Signed-off-by: Przemyslaw Korba <przemyslaw.korba@intel.com> Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-01-07ice: fix max values for dpll pin phase adjustArkadiusz Kubalewski2-12/+25
Mask admin command returned max phase adjust value for both input and output pins. Only 31 bits are relevant, last released data sheet wrongly points that 32 bits are valid - see [1] 3.2.6.4.1 Get CCU Capabilities Command for reference. Fix of the datasheet itself is in progress. Fix the min/max assignment logic, previously the value was wrongly considered as negative value due to most significant bit being set. Example of previous broken behavior: $ ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/dpll.yaml \ --do pin-get --json '{"id":1}'| grep phase-adjust 'phase-adjust': 0, 'phase-adjust-max': 16723, 'phase-adjust-min': -16723, Correct behavior with the fix: $ ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/dpll.yaml \ --do pin-get --json '{"id":1}'| grep phase-adjust 'phase-adjust': 0, 'phase-adjust-max': 2147466925, 'phase-adjust-min': -2147466925, [1] https://cdrdv2.intel.com/v1/dl/getContent/613875?explicitVersion=true Fixes: 90e1c90750d7 ("ice: dpll: implement phase related callbacks") Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-12-17idpf: trigger SW interrupt when exiting wb_on_itr modeJoshua Hay1-10/+19
There is a race condition between exiting wb_on_itr and completion write backs. For example, we are in wb_on_itr mode and a Tx completion is generated by HW, ready to be written back, as we are re-enabling interrupts: HW SW | | | | idpf_tx_splitq_clean_all | | napi_complete_done | | | tx_completion_wb | idpf_vport_intr_update_itr_ena_irq That tx_completion_wb happens before the vector is fully re-enabled. Continuing with this example, it is a UDP stream and the tx_completion_wb is the last one in the flow (there are no rx packets). Because the HW generated the completion before the interrupt is fully enabled, the HW will not fire the interrupt once the timer expires and the write back will not happen. NAPI poll won't be called. We have indicated we're back in interrupt mode but nothing else will trigger the interrupt. Therefore, the completion goes unprocessed, triggering a Tx timeout. To mitigate this, fire a SW triggered interrupt upon exiting wb_on_itr. This interrupt will catch the rogue completion and avoid the timeout. Add logic to set the appropriate bits in the vector's dyn_ctl register. Fixes: 9c4a27da0ecc ("idpf: enable WB_ON_ITR") Reviewed-by: Madhu Chittim <madhu.chittim@intel.com> Signed-off-by: Joshua Hay <joshua.a.hay@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-12-17idpf: add support for SW triggered interruptsJoshua Hay3-1/+13
SW triggered interrupts are guaranteed to fire after their timer expires, unlike Tx and Rx interrupts which will only fire after the timer expires _and_ a descriptor write back is available to be processed by the driver. Add the necessary fields, defines, and initializations to enable a SW triggered interrupt in the vector's dyn_ctl register. Reviewed-by: Madhu Chittim <madhu.chittim@intel.com> Signed-off-by: Joshua Hay <joshua.a.hay@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-12-05Merge tag 'net-6.13-rc2' of ↵Linus Torvalds11-18/+41
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Including fixes from can and netfilter. Current release - regressions: - rtnetlink: fix double call of rtnl_link_get_net_ifla() - tcp: populate XPS related fields of timewait sockets - ethtool: fix access to uninitialized fields in set RXNFC command - selinux: use sk_to_full_sk() in selinux_ip_output() Current release - new code bugs: - net: make napi_hash_lock irq safe - eth: - bnxt_en: support header page pool in queue API - ice: fix NULL pointer dereference in switchdev Previous releases - regressions: - core: fix icmp host relookup triggering ip_rt_bug - ipv6: - avoid possible NULL deref in modify_prefix_route() - release expired exception dst cached in socket - smc: fix LGR and link use-after-free issue - hsr: avoid potential out-of-bound access in fill_frame_info() - can: hi311x