summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/netronome/nfp/nfp_net_repr.c
AgeCommit message (Collapse)AuthorFilesLines
2024-05-07net: annotate writes on dev->mtu from ndo_change_mtu()Eric Dumazet1-1/+1
Simon reported that ndo_change_mtu() methods were never updated to use WRITE_ONCE(dev->mtu, new_mtu) as hinted in commit 501a90c94510 ("inet: protect against too small mtu values.") We read dev->mtu without holding RTNL in many places, with READ_ONCE() annotations. It is time to take care of ndo_change_mtu() methods to use corresponding WRITE_ONCE() Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Simon Horman <horms@kernel.org> Closes: https://lore.kernel.org/netdev/20240505144608.GB67882@kernel.org/ Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Simon Horman <horms@kernel.org> Acked-by: Shannon Nelson <shannon.nelson@amd.com> Link: https://lore.kernel.org/r/20240506102812.3025432-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-03net: remove unused ndo_get_devlink_portJiri Pirko1-1/+0
Remove ndo_get_devlink_port which is no longer used alongside with the implementations in drivers. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-28net: Remove the obsolte u64_stats_fetch_*_irq() users (drivers).Thomas Gleixner1-2/+2
Now that the 32bit UP oddity is gone and 32bit uses always a sequence count, there is no need for the fetch_irq() variants anymore. Convert to the regular interface. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-06nfp: enable TSO by default for nfp netdevSimon Horman1-3/+2
We can benefit from TSO when the host CPU is not powerful enough, so enable it by default now. Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com> Reviewed-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-04nfp: support TX VLAN ctag insertDiana Wang1-1/+1
Add support for TX VLAN ctag insert which may be configured via ethtool. e.g. # ethtool -K $DEV tx-vlan-offload on The NIC supplies VLAN insert information as packet metadata. The fields of this VLAN metadata are gotten from sk_buff, including vlan_proto and vlan tag. Configuration control bit NFP_NET_CFG_CTRL_TXVLAN_V2 is to signal availability of ctag-insert features of the firmware. NFDK is used to communicate via PCIE to NFP-3800 based NICs while NFD3 is used for other NICs supported by the NFP driver. The metadata format on tx side of NFD3 is different from NFDK. This feature is not currently implemented for NFDK. Signed-off-by: Diana Wang <na.wang@corigine.com> Reviewed-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-04nfp: support RX VLAN ctag/stag stripDiana Wang1-3/+8
Add support for RX VLAN ctag/stag strip which may be configured via ethtool. e.g. # ethtool -K $DEV rx-vlan-offload on # ethtool -K $DEV rx-vlan-stag-hw-parse on Ctag-stripped and stag-stripped cannot be enabled at the same time because currently the kernel supports only one layer of VLAN stripping. The NIC supplies VLAN strip information as packet metadata. The fields of this VLAN metadata are: * strip flag: 1 for stripped; 0 for unstripped * tci: VLAN TCI ID * tpid: 1 for ETH_P_8021AD; 0 for ETH_P_8021Q Configuration control bits NFP_NET_CFG_CTRL_RXVLAN_V2 and NFP_NET_CFG_CTRL_RXQINQ are to signal availability of ctag-strip and stag-strip features of the firmware. Signed-off-by: Diana Wang <na.wang@corigine.com> Reviewed-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-06net: make drivers set the TSO limit not the GSO limitJakub Kicinski1-1/+1
Drivers should call the TSO setting helper, GSO is controllable by user space. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-06net: add netif_inherit_tso_max()Jakub Kicinski1-2/+1
To make later patches smaller create a helper for inheriting the TSO limitations of a lower device. The TSO in the name is not an accident, subsequent patches will replace GSO with TSO in more names. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-16eth: nfp: wrap locking assertions in helpersJakub Kicinski1-2/+2
We can replace the PF lock with devlink instance lock in subsequent changes. To make the patches easier to comprehend and limit line lengths - factor out the existing locking assertions. No functional changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-11-22net: annotate accesses to dev->gso_max_segsEric Dumazet1-2/+2
dev->gso_max_segs is written under RTNL protection, or when the device is not yet visible, but is read locklessly. Add netif_set_gso_max_segs() helper. Add the READ_ONCE()/WRITE_ONCE() pairs, and use netif_set_gso_max_segs() where we can to better document what is going on. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-22net: annotate accesses to dev->gso_max_sizeEric Dumazet1-1/+1
dev->gso_max_size is written under RTNL protection, or when the device is not yet visible, but is read locklessly. Add the READ_ONCE()/WRITE_ONCE() pairs, and use netif_set_gso_max_size() where we can to better document what is going on. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-13nfp: Prefer struct_size over open coded arithmeticLen Baker1-2/+1
As noted in the "Deprecated Interfaces, Language Features, Attributes, and Conventions" documentation [1], size calculations (especially multiplication) should not be performed in memory allocator (or similar) function arguments due to the risk of them overflowing. This could lead to values wrapping around and a smaller allocation being made than the caller was expecting. Using those allocations could lead to linear overflows of heap memory and other misbehaviors. So, use the struct_size() helper to do the arithmetic instead of the argument "size + count * size" in the kzalloc() function. [1] https://www.kernel.org/doc/html/v5.14/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments Signed-off-by: Len Baker <len.baker@gmx.com> Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-17nfp: Fix fall-through warnings for ClangGustavo A. R. Silva1-0/+1
In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning by explicitly adding a break statement instead of letting the code fall through to the next case. Link: https://github.com/KSPP/linux/issues/115 Acked-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-05-04net: partially revert dynamic lockdep key changesCong Wang1-0/+16
This patch reverts the folowing commits: commit 064ff66e2bef84f1153087612032b5b9eab005bd "bonding: add missing netdev_update_lockdep_key()" commit 53d374979ef147ab51f5d632dfe20b14aebeccd0 "net: avoid updating qdisc_xmit_lock_key in netdev_update_lockdep_key()" commit 1f26c0d3d24125992ab0026b0dab16c08df947c7 "net: fix kernel-doc warning in <linux/netdevice.h>" commit ab92d68fc22f9afab480153bd82a20f6e2533769 "net: core: add generic lockdep keys" but keeps the addr_list_lock_key because we still lock addr_list_lock nestedly on stack devices, unlikely xmit_lock this is safe because we don't take addr_list_lock on any fast path. Reported-and-tested-by: syzbot+aaa6fa4949cc5d9b7b25@syzkaller.appspotmail.com Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-24net: core: add generic lockdep keysTaehee Yoo1-18/+0
Some interface types could be nested. (VLAN, BONDING, TEAM, MACSEC, MACVLAN, IPVLAN, VIRT_WIFI, VXLAN, etc..) These interface types should set lockdep class because, without lockdep class key, lockdep always warn about unexisting circular locking. In the current code, these interfaces have their own lockdep class keys and these manage itself. So that there are so many duplicate code around the /driver/net and /net/. This patch adds new generic lockdep keys and some helper functions for it. This patch does below changes. a) Add lockdep class keys in struct net_device - qdisc_running, xmit, addr_list, qdisc_busylock - these keys are used as dynamic lockdep key. b) When net_device is being allocated, lockdep keys are registered. - alloc_netdev_mqs() c) When net_device is being free'd llockdep keys are unregistered. - free_netdev() d) Add generic lockdep key helper function - netdev_register_lockdep_key() - netdev_unregister_lockdep_key() - netdev_update_lockdep_key() e) Remove unnecessary generic lockdep macro and functions f) Remove unnecessary lockdep code of each interfaces. After this patch, each interface modules don't need to maintain their lockdep keys. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-08nfp: reintroduce ndo_get_port_parent_id for representor portsPieter Jansen van Vuuren1-0/+1
NFP does not register devlink ports for representors (without the "devlink: expose PF and VF representors as ports" series there are no port flavours to expose them as). Commit c25f08ac65e4 ("nfp: remove ndo_get_port_parent_id implementation") went to far in removing ndo_get_port_parent_id for representors. This causes redirection offloads to fail, and switch_id attribute missing. Reintroduce the ndo_get_port_parent_id callback for representor ports. Fixes: c25f08ac65e4 ("nfp: remove ndo_get_port_parent_id implementation") Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-19nfp: add SR-IOV trusted VF supportPablo Cascón1-0/+1
By default VFs are not trusted. Add ndo_set_vf_trust support to toggle a new per-VF bit. Coupled with FW with this capability allows a trusted VF to change its MAC even after being administratively set by the PF. Also populate the trusted field on ndo_get_vf_config. Add the same ndo to the representors. Signed-off-by: Pablo Cascón <pablo.cascon@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-2/+2
Minor comment merge conflict in mlx5. Staging driver has a fixup due to the skb->xmit_more changes in 'net-next', but was removed in 'net'. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-04nfp: remove ndo_get_port_parent_id implementationJiri Pirko1-1/+0
Remove implementation of get_port_parent_id ndo and rely on core calling into devlink for the information directly. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-28nfp: disable netpoll on representorsJakub Kicinski1-1/+1
NFP reprs are software device on top of the PF's vNIC. The comment above __dev_queue_xmit() sayeth: When calling this method, interrupts MUST be enabled. This is because the BH enable code must have IRQs enabled so that it will not deadlock. For netconsole we can't guarantee IRQ state, let's just disable netpoll on representors to be on the safe side. When the initial implementation of NFP reprs was added by the commit 5de73ee46704 ("nfp: general representor implementation") .ndo_poll_controller was required for netpoll to be enabled. Fixes: ac3d9dd034e5 ("netpoll: make ndo_poll_controller() optional") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: John Hurley <john.hurley@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-28nfp: validate the return code from dev_queue_xmit()Jakub Kicinski1-1/+1
dev_queue_xmit() may return error codes as well as netdev_tx_t, and it always consumes the skb. Make sure we always return a correct netdev_tx_t value. Fixes: eadfa4c3be99 ("nfp: add stats and xmit helpers for representors") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: John Hurley <john.hurley@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-28net: replace ndo_get_devlink with ndo_get_devlink_portJiri Pirko1-1/+1
Follow-up patch is going to need a devlink port instance according to a netdev. Devlink port instance should be always available when devlink is used. So change the recently introduced ndo_get_devlink to ndo_get_devlink_port. With that, adjust the wrapper for the only user to get devlink pointer. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Michal Kubecek <mkubecek@suse.cz> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-26nfp: add .ndo_get_devlinkJakub Kicinski1-0/+1
Support getting devlink instance from a new NDO. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-06nfp: Implement ndo_get_port_parent_id()Florian Fainelli1-3/+1
NFP only supports SWITCHDEV_ATTR_ID_PORT_PARENT_ID, which makes it a great candidate to be converted to use the ndo_get_port_parent_id() NDO instead of implementing switchdev_port_attr_get(). Since NFP uses switchdev_port_same_parent_id() convert it to use netdev_port_same_parent_id(). Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-30nfp: add offloads on representorsJakub Kicinski1-0/+85
FW/HW can generally support the standard networking offloads on representors without any trouble. Add the ability for FW to advertise which features should be available on representors. Because representors are muxed on top of the vNIC we need to listen on feature changes of their lower devices, and update their features appropriately. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: John Hurley <john.hurley@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-30nfp: add locking around representor changesJakub Kicinski1-0/+2
Up until now we never needed to keep a networking locks around representors accesses, we only accessed them when device was reconfigured (under nfp pf->lock) or on fast path (under RCU). Now we want to be able to iterate over all representors during notifications, so make sure representor assignment is done under RTNL lock. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: John Hurley <john.hurley@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-30nfp: run don't require Qdiscs on representor netdevsJakub Kicinski1-0/+1
Our representors are software devices built on top of the PF vNIC, the queuing should only happen at the vNIC netdevice. Allow representors to run qdisc-less. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: John Hurley <john.hurley@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-30nfp: run representor TX locklesslyJakub Kicinski1-0/+2
Our representors are software devices built on top of the PF vNIC, the only state they have are per-cpu stats, so make the TX run locklessly. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: John Hurley <john.hurley@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-11nfp: replace long license headers with SPDXJakub Kicinski1-32/+2
Replace the repeated license text with SDPX identifiers. While at it bump the Copyright dates for files we touched this year. Signed-off-by: Edwin Peer <edwin.peer@netronome.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Nic Viljoen <nick.viljoen@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-18nfp: add .ndo_init() and .ndo_uninit() callbacksJakub Kicinski1-0/+2
BPF code should unregister the offload capabilities from .ndo_uninit(), to make sure the operation is atomic with unlist_netdevice(). Plumb the init/uninit NDOs for vNICs and representors. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-05-29nfp: abm: expose all PF queuesJakub Kicinski1-2/+3
Allocate the PF representor as multi-queue to allow setting the configuration per-queue. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-24nfp: add ndo_set_mac_address for representorsJohn Hurley1-0/+1
Adding a netdev to a bond requires that its mac address can be modified. The default eth_mac_addr is sufficient to satisfy this requirement. Signed-off-by: John Hurley <john.hurley@netronome.com> Reviewed-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-23nfp: abm: spawn port netdevsJakub Kicinski1-1/+1
To configure buffering points we need full set of netdevs: ASIC user netdev -- | -- PCIe port MAC port -- | -- Configuring egrees qdiscs on user netdev configures standard Linux TC software qdiscs, configuring PCIe port qdiscs will provide a way of setting ASIC queuing parameters for PCIe block. MAC port netdev egress qdiscs correspond to ASIC MAC Traffic Manager block. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-17nfp: flower: fix error path during representor creationJiri Pirko1-2/+7
Don't store repr pointer to reprs array until the representor is successfully created. This avoids message about "representor destruction" even when it was never created. Also it cleans-up the flow. Also, check return value after port alloc. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-30nfp: modify app MTU setting callbacksJohn Hurley1-1/+12
Rename the 'change_mtu' app callback to 'check_mtu'. This is called whenever an MTU change is requested on a netdev. It can reject the change but is not responsible for implementing it. Introduce a new 'repr_change_mtu' app callback that is hit when the MTU of a repr is to be changed. This is responsible for performing the MTU change and verifying it. Signed-off-by: John Hurley <john.hurley@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-08nfp: forbid disabling hw-tc-offload on representors while offload activeJakub Kicinski1-0/+1
All netdevs which can accept TC offloads must implement .ndo_set_features(). nfp_reprs currently do not do that, which means hw-tc-offload can be turned on and off even when offloads are active. Whether the offloads are active is really a question to nfp_ports, so remove the per-app tc_busy callback indirection thing, and simply count the number of offloaded items in nfp_port structure. Fixes: 8a2768732a4d ("nfp: provide infrastructure for offloading flower based TC filters") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Tested-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-19nfp: protect each repr pointer individually with RCUJakub Kicinski1-38/+33
Representors are grouped in sets by type. Currently the whole sets are under RCU protection, but individual representor pointers are not. This causes some inconveniences when representors have to be destroyed, because we have to allocate new sets to remove any representors. Protect the individual pointers with RCU. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-19nfp: add nfp_reprs_get_locked() helperJakub Kicinski1-3/+1
The write side of repr tables is always done under pf->lock. Add a helper to dereference repr table pointers under protection of that lock. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-10nfp: bpf: don't allow changing MTU above BPF offload limit when activeJakub Kicinski1-0/+8
When BPF offload is active we need may need to restrict the MTU changes more than just to the limitation of the kernel XDP datapath. Allow the BPF code to veto a MTU change. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-01-03nfp: add repr_preclean callbackDirk van der Merwe1-3/+15
Just before a repr is cleaned up, we give the app a chance to perform some preclean configuration while the reprs pointer is still configured for the app. Signed-off-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-03nfp: flower: obtain repr link state only from firmwareDirk van der Merwe1-0/+2
Instead of starting up reprs assuming that there is link, only respond to the link state reported by firmware. Furthermore, ensure link is down after repr netdevs are created. Signed-off-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-05nfp: fix port stats for mac representorsPieter Jansen van Vuuren1-9/+6
Previously we swapped the tx_packets, tx_bytes and tx_dropped counters with rx_packets, rx_bytes and rx_dropped counters, respectively. This behaviour is correct and expected for VF representors but it should not be swapped for physical port mac representors. Fixes: eadfa4c3be99 ("nfp: add stats and xmit helpers for representors") Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-17nfp: register flower reprs for egress dev offloadJohn Hurley1-1/+8
Register a callback for offloading flows that have a repr as their egress device. The new egdev_register function is added to net-next for the 4.15 release. Signed-off-by: John Hurley <john.hurley@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-17nfp: inherit the max_mtu from the PF netdevDirk van der Merwe1-0/+2
The PF netdev is used for data transfer for reprs, so reprs inherit the maximum MTU settings of the PF netdev. Fixes: 5de73ee46704 ("nfp: general representor implementation") Signed-off-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-05nfp: resync repr state when port table syncDirk van der Merwe1-0/+47
If the NSP port table has been refreshed, resync the representor state with the new port information. At the moment, this only entails looking for invalid ports and killing off representors associated with them. The repr instance becomes NULL which is safe since the app accessor function for reprs returns NULL when it cannot access a repr. Signed-off-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-25nfp: add basic SR-IOV ndo functions to representorsSimon Horman1-0/+6
Add basic ndo_set/get_vf to support SR-IOV on all types of port representors. Signed-off-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18nfp: add pointer to vNIC config memory to nfp_port structureJakub Kicinski1-36/+9
Simplify the statistics handling code by keeping pointer to vNIC's config memory in nfp_port. Note that this is referring to the representor side of vNICs, vNIC side has the pointer in nfp_net. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18nfp: store pointer to MAC statistics in nfp_portJakub Kicinski1-8/+4
Store pointer to device memory containing MAC statistics in nfp_port. This simplifies representor code and will be used to dump those statistics in ethtool as well. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18nfp: link basic ethtool ops to representorsJakub Kicinski1-0/+2
Start linking ethtool ops to representors. Begin by adding a separate ops structure and providing link state. Next patches will convert appropriate functions to only use nfp_port, which will make them reusable on representors. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-25nfp: set config bit (ifup/ifdown) on netdev open/closeDirk van der Merwe1-2/+21
When a netdev (PF netdev or representor) is opened or closed, set the physical port config bit appropriately - which powers UP/DOWN the PHY module for the physical interface. The PHY is powered first in the HW/FW configuration step when opening the netdev and again last in the HW/FW configuration step when closing the netdev. This is only applicable when there is a physical port associated with the netdev and if the NSP support this. Otherwise we silently ignore this step. The 'nfp_eth_set_configured' can actually return positive values - updated the function documentation appropriately. Signed-off-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2025-08-30 18:36:34 +0000