Age | Commit message (Collapse) | Author | Files | Lines |
|
In the current interrupt controller, the MAC interrupt acts as the
parent interrupt in the GPIO IRQ chip. But when the number of Rx/Tx
ring changes, the PCI IRQ vector needs to be reallocated. Then this
interrupt controller would be corrupted. So use irq_domain structure
to avoid the above problem.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add support to get RX/TX queue number with ethtool -l, and set RX/TX
queue number with ethtool -L. Since interrupts need to be rescheduled,
adjust the allocation of msix enties.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add support to set pause params with ethtool -A and get pause
params with ethtool -a, for ethernet driver txgbe and ngbe.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When the device uses a custom subsystem vendor ID, the function
wx_sw_init() returns before the memory of 'wx->mac_table' is allocated.
The null pointer will causes the kernel panic.
Fixes: 79625f45ca73 ("net: wangxun: Move MAC address handling to libwx")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Implement update and clear Rx/Tx statistics.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Link: https://lore.kernel.org/r/20231011091906.70486-2-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Move similar code of accessing MDIO bus from txgbe/ngbe to libwx.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230912031424.721386-1-jiawenwu@trustnetic.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Cross-merge networking fixes after downstream PR.
No conflicts or adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The old way to do LAN reset is sending reset command to firmware. Once
firmware performs reset, it reconfigures what it needs.
In the new firmware versions, veto bit is introduced for NCSI/LLDP to
block PHY domain in LAN reset. At this point, writing register of LAN
reset directly makes the same effect as the old way. And it does not
reset MNG domain, so that veto bit does not change.
Since veto bit was never used, the old firmware is compatible with the
driver before and after this change. The new firmware needs to use with
the driver after this change if it wants to implement the new feature,
otherwise it is the same as the old firmware.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20230717021333.94181-1-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Identify issues that arise by using the tests/doublebitand.cocci
semantic patch. Need to remove duplicate expression in if statement.
Signed-off-by: Wang Ming <machel@vivo.com>
Reviewed-by: Jiawen Wu <jiawenwu@trustnetic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Implement ethtool_ops get_wol and set_wol.
Implement Wake-on-LAN support.
Wol requires hardware board support which use sub id
to identify.
Magic packets are checked by fw, for now just support
WAKE_MAGIC.
Signed-off-by: Mengyuan Lou <mengyuanlou@net-swift.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Implement vlan add/kill functions which add and remove
vlan id in hardware.
Signed-off-by: Mengyuan Lou <mengyuanlou@net-swift.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add ngbe and txgbe ndo_change_mtu support.
Signed-off-by: Mengyuan Lou <mengyuanlou@net-swift.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Support to transmit packets without hardware features.
Signed-off-by: Mengyuan Lou <mengyuanlou@net-swift.com>
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Clean all queues associated with a q_vector, to simple receive packets
without hardware features.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Setup Rx and Tx descriptors for specefic rings.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Configure hardware for preparing to process packets. Including configure
receive and transmit unit of the MAC layer, and setup the specific rings.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add irq flow functions for ngbe and txgbe.
Alloc pcie msix irqs for drivers, otherwise fall back to msi/legacy.
Signed-off-by: Mengyuan Lou <mengyuanlou@net-swift.com>
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Convert various mult-bit fields to be defined using GENMASK/FIELD_PREP.
Simplify the code with the ternary operator.
Signed-off-by: Mengyuan Lou <mengyuanlou@net-swift.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230116103839.84087-1-mengyuanlou@net-swift.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Move the total private structure to libwx.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In order to move the total members in struct adapter to struct wx_hw
to keep the code clean, it's a bad name of 'wx_hw' only for hardware.
Rename 'wx_hw' to 'wx', and rename the pointers at use.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
For setting MAC address, both txgbe and ngbe drivers have the same handling
flow with different parameters. Move the same codes to libwx.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix duplicate check on polling timeout.
Fixes: 1efa9bfe58c5 ("net: libwx: Implement interaction with firmware")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Initialize ngbe mac/phy type.
Check whether the firmware is initialized.
Initialize ngbe hw and register netdev.
Signed-off-by: Mengyuan Lou <mengyuanlou@net-swift.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add mailbox commands to interact with firmware.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add MAC address related operations, and register netdev.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Reset and initialize the hardware by configuring the MAC layer.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Get PCI config space info, set LAN id and check flash status.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|