summaryrefslogtreecommitdiff
path: root/drivers/net/ipvlan
AgeCommit message (Collapse)AuthorFilesLines
2024-02-26rtnetlink: prepare nla_put_iflink() to run under RCUEric Dumazet1-1/+1
We want to be able to run rtnl_fill_ifinfo() under RCU protection instead of RTNL in the future. This patch prepares dev_get_iflink() and nla_put_iflink() to run either with RTNL or RCU held. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-09net: fill in MODULE_DESCRIPTION()s for ipvtapBreno Leitao1-0/+1
W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to the IP-VLAN based tap driver. Signed-off-by: Breno Leitao <leitao@debian.org> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240208164244.3818498-9-leitao@debian.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-07ipvlan: Remove usage of the deprecated ida_simple_xx() APIChristophe JAILLET1-6/+6
ida_alloc() and ida_free() should be preferred to the deprecated ida_simple_get() and ida_simple_remove(). This is less verbose. Note that the upper bound of ida_alloc_range() is inclusive while the one of ida_simple_get() was exclusive. So calls have been updated accordingly. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-07ipvlan: Fix a typo in a commentChristophe JAILLET1-1/+1
s/diffentiate/differentiate/ Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-05ipvlan: implement .parse_protocol hook function in ipvlan_header_opsZhengchao Shao1-0/+1
The .parse_protocol hook function in the ipvlan_header_ops structure is not implemented. As a result, when the AF_PACKET family is used to send packets, skb->protocol will be set to 0. Ipvlan is a device of type ARPHRD_ETHER (ether_setup). Therefore, use eth_header_parse_protocol function to obtain the protocol. Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/r/20231202130438.2266343-1-shaozhengchao@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-11-10ipvlan: add ipvlan_route_v6_outbound() helperEric Dumazet1-16/+25
Inspired by syzbot reports using a stack of multiple ipvlan devices. Reduce stack size needed in ipvlan_process_v6_outbound() by moving the flowi6 struct used for the route lookup in an non inlined helper. ipvlan_route_v6_outbound() needs 120 bytes on the stack, immediately reclaimed. Also make sure ipvlan_process_v4_outbound() is not inlined. We might also have to lower MAX_NEST_DEV, because only syzbot uses setups with more than four stacked devices. BUG: TASK stack guard page was hit at ffffc9000e803ff8 (stack is ffffc9000e804000..ffffc9000e808000) stack guard page: 0000 [#1] SMP KASAN CPU: 0 PID: 13442 Comm: syz-executor.4 Not tainted 6.1.52-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/09/2023 RIP: 0010:kasan_check_range+0x4/0x2a0 mm/kasan/generic.c:188 Code: 48 01 c6 48 89 c7 e8 db 4e c1 03 31 c0 5d c3 cc 0f 0b eb 02 0f 0b b8 ea ff ff ff 5d c3 cc 00 00 cc cc 00 00 cc cc 55 48 89 e5 <41> 57 41 56 41 55 41 54 53 b0 01 48 85 f6 0f 84 a4 01 00 00 48 89 RSP: 0018:ffffc9000e804000 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffff817e5bf2 RDX: 0000000000000000 RSI: 0000000000000008 RDI: ffffffff887c6568 RBP: ffffc9000e804000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: dffffc0000000001 R12: 1ffff92001d0080c R13: dffffc0000000000 R14: ffffffff87e6b100 R15: 0000000000000000 FS: 00007fd0c55826c0(0000) GS:ffff8881f6800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffc9000e803ff8 CR3: 0000000170ef7000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <#DF> </#DF> <TASK> [<ffffffff81f281d1>] __kasan_check_read+0x11/0x20 mm/kasan/shadow.c:31 [<ffffffff817e5bf2>] instrument_atomic_read include/linux/instrumented.h:72 [inline] [<ffffffff817e5bf2>] _test_bit include/asm-generic/bitops/instrumented-non-atomic.h:141 [inline] [<ffffffff817e5bf2>] cpumask_test_cpu include/linux/cpumask.h:506 [inline] [<ffffffff817e5bf2>] cpu_online include/linux/cpumask.h:1092 [inline] [<ffffffff817e5bf2>] trace_lock_acquire include/trace/events/lock.h:24 [inline] [<ffffffff817e5bf2>] lock_acquire+0xe2/0x590 kernel/locking/lockdep.c:5632 [<ffffffff8563221e>] rcu_lock_acquire+0x2e/0x40 include/linux/rcupdate.h:306 [<ffffffff8561464d>] rcu_read_lock include/linux/rcupdate.h:747 [inline] [<ffffffff8561464d>] ip6_pol_route+0x15d/0x1440 net/ipv6/route.c:2221 [<ffffffff85618120>] ip6_pol_route_output+0x50/0x80 net/ipv6/route.c:2606 [<ffffffff856f65b5>] pol_lookup_func include/net/ip6_fib.h:584 [inline] [<ffffffff856f65b5>] fib6_rule_lookup+0x265/0x620 net/ipv6/fib6_rules.c:116 [<ffffffff85618009>] ip6_route_output_flags_noref+0x2d9/0x3a0 net/ipv6/route.c:2638 [<ffffffff8561821a>] ip6_route_output_flags+0xca/0x340 net/ipv6/route.c:2651 [<ffffffff838bd5a3>] ip6_route_output include/net/ip6_route.h:100 [inline] [<ffffffff838bd5a3>] ipvlan_process_v6_outbound drivers/net/ipvlan/ipvlan_core.c:473 [inline] [<ffffffff838bd5a3>] ipvlan_process_outbound drivers/net/ipvlan/ipvlan_core.c:529 [inline] [<ffffffff838bd5a3>] ipvlan_xmit_mode_l3 drivers/net/ipvlan/ipvlan_core.c:602 [inline] [<ffffffff838bd5a3>] ipvlan_queue_xmit+0xc33/0x1be0 drivers/net/ipvlan/ipvlan_core.c:677 [<ffffffff838c2909>] ipvlan_start_xmit+0x49/0x100 drivers/net/ipvlan/ipvlan_main.c:229 [<ffffffff84d03900>] netdev_start_xmit include/linux/netdevice.h:4966 [inline] [<ffffffff84d03900>] xmit_one net/core/dev.c:3644 [inline] [<ffffffff84d03900>] dev_hard_start_xmit+0x320/0x980 net/core/dev.c:3660 [<ffffffff84d080e2>] __dev_queue_xmit+0x16b2/0x3370 net/core/dev.c:4324 [<ffffffff855ce4cd>] dev_queue_xmit include/linux/netdevice.h:3067 [inline] [<ffffffff855ce4cd>] neigh_hh_output include/net/neighbour.h:529 [inline] [<ffffffff855ce4cd>] neigh_output include/net/neighbour.h:543 [inline] [<ffffffff855ce4cd>] ip6_finish_output2+0x160d/0x1ae0 net/ipv6/ip6_output.c:139 [<ffffffff855b8616>] __ip6_finish_output net/ipv6/ip6_output.c:200 [inline] [<ffffffff855b8616>] ip6_finish_output+0x6c6/0xb10 net/ipv6/ip6_output.c:211 [<ffffffff855b7e3c>] NF_HOOK_COND include/linux/netfilter.h:298 [inline] [<ffffffff855b7e3c>] ip6_output+0x2bc/0x3d0 net/ipv6/ip6_output.c:232 [<ffffffff8575d27f>] dst_output include/net/dst.h:444 [inline] [<ffffffff8575d27f>] ip6_local_out+0x10f/0x140 net/ipv6/output_core.c:161 [<ffffffff838bdae4>] ipvlan_process_v6_outbound drivers/net/ipvlan/ipvlan_core.c:483 [inline] [<ffffffff838bdae4>] ipvlan_process_outbound drivers/net/ipvlan/ipvlan_core.c:529 [inline] [<ffffffff838bdae4>] ipvlan_xmit_mode_l3 drivers/net/ipvlan/ipvlan_core.c:602 [inline] [<ffffffff838bdae4>] ipvlan_queue_xmit+0x1174/0x1be0 drivers/net/ipvlan/ipvlan_core.c:677 [<ffffffff838c2909>] ipvlan_start_xmit+0x49/0x100 drivers/net/ipvlan/ipvlan_main.c:229 [<ffffffff84d03900>] netdev_start_xmit include/linux/netdevice.h:4966 [inline] [<ffffffff84d03900>] xmit_one net/core/dev.c:3644 [inline] [<ffffffff84d03900>] dev_hard_start_xmit+0x320/0x980 net/core/dev.c:3660 [<ffffffff84d080e2>] __dev_queue_xmit+0x16b2/0x3370 net/core/dev.c:4324 [<ffffffff855ce4cd>] dev_queue_xmit include/linux/netdevice.h:3067 [inline] [<ffffffff855ce4cd>] neigh_hh_output include/net/neighbour.h:529 [inline] [<ffffffff855ce4cd>] neigh_output include/net/neighbour.h:543 [inline] [<ffffffff855ce4cd>] ip6_finish_output2+0x160d/0x1ae0 net/ipv6/ip6_output.c:139 [<ffffffff855b8616>] __ip6_finish_output net/ipv6/ip6_output.c:200 [inline] [<ffffffff855b8616>] ip6_finish_output+0x6c6/0xb10 net/ipv6/ip6_output.c:211 [<ffffffff855b7e3c>] NF_HOOK_COND include/linux/netfilter.h:298 [inline] [<ffffffff855b7e3c>] ip6_output+0x2bc/0x3d0 net/ipv6/ip6_output.c:232 [<ffffffff8575d27f>] dst_output include/net/dst.h:444 [inline] [<ffffffff8575d27f>] ip6_local_out+0x10f/0x140 net/ipv6/output_core.c:161 [<ffffffff838bdae4>] ipvlan_process_v6_outbound drivers/net/ipvlan/ipvlan_core.c:483 [inline] [<ffffffff838bdae4>] ipvlan_process_outbound drivers/net/ipvlan/ipvlan_core.c:529 [inline] [<ffffffff838bdae4>] ipvlan_xmit_mode_l3 drivers/net/ipvlan/ipvlan_core.c:602 [inline] [<ffffffff838bdae4>] ipvlan_queue_xmit+0x1174/0x1be0 drivers/net/ipvlan/ipvlan_core.c:677 [<ffffffff838c2909>] ipvlan_start_xmit+0x49/0x100 drivers/net/ipvlan/ipvlan_main.c:229 [<ffffffff84d03900>] netdev_start_xmit include/linux/netdevice.h:4966 [inline] [<ffffffff84d03900>] xmit_one net/core/dev.c:3644 [inline] [<ffffffff84d03900>] dev_hard_start_xmit+0x320/0x980 net/core/dev.c:3660 [<ffffffff84d080e2>] __dev_queue_xmit+0x16b2/0x3370 net/core/dev.c:4324 [<ffffffff855ce4cd>] dev_queue_xmit include/linux/netdevice.h:3067 [inline] [<ffffffff855ce4cd>] neigh_hh_output include/net/neighbour.h:529 [inline] [<ffffffff855ce4cd>] neigh_output include/net/neighbour.h:543 [inline] [<ffffffff855ce4cd>] ip6_finish_output2+0x160d/0x1ae0 net/ipv6/ip6_output.c:139 [<ffffffff855b8616>] __ip6_finish_output net/ipv6/ip6_output.c:200 [inline] [<ffffffff855b8616>] ip6_finish_output+0x6c6/0xb10 net/ipv6/ip6_output.c:211 [<ffffffff855b7e3c>] NF_HOOK_COND include/linux/netfilter.h:298 [inline] [<ffffffff855b7e3c>] ip6_output+0x2bc/0x3d0 net/ipv6/ip6_output.c:232 [<ffffffff8575d27f>] dst_output include/net/dst.h:444 [inline] [<ffffffff8575d27f>] ip6_local_out+0x10f/0x140 net/ipv6/output_core.c:161 [<ffffffff838bdae4>] ipvlan_process_v6_outbound drivers/net/ipvlan/ipvlan_core.c:483 [inline] [<ffffffff838bdae4>] ipvlan_process_outbound drivers/net/ipvlan/ipvlan_core.c:529 [inline] [<ffffffff838bdae4>] ipvlan_xmit_mode_l3 drivers/net/ipvlan/ipvlan_core.c:602 [inline] [<ffffffff838bdae4>] ipvlan_queue_xmit+0x1174/0x1be0 drivers/net/ipvlan/ipvlan_core.c:677 [<ffffffff838c2909>] ipvlan_start_xmit+0x49/0x100 drivers/net/ipvlan/ipvlan_main.c:229 [<ffffffff84d03900>] netdev_start_xmit include/linux/netdevice.h:4966 [inline] [<ffffffff84d03900>] xmit_one net/core/dev.c:3644 [inline] [<ffffffff84d03900>] dev_hard_start_xmit+0x320/0x980 net/core/dev.c:3660 [<ffffffff84d080e2>] __dev_queue_xmit+0x16b2/0x3370 net/core/dev.c:4324 [<ffffffff855ce4cd>] dev_queue_xmit include/linux/netdevice.h:3067 [inline] [<ffffffff855ce4cd>] neigh_hh_output include/net/neighbour.h:529 [inline] [<ffffffff855ce4cd>] neigh_output include/net/neighbour.h:543 [inline] [<ffffffff855ce4cd>] ip6_finish_output2+0x160d/0x1ae0 net/ipv6/ip6_output.c:139 [<ffffffff855b8616>] __ip6_finish_output net/ipv6/ip6_output.c:200 [inline] [<ffffffff855b8616>] ip6_finish_output+0x6c6/0xb10 net/ipv6/ip6_output.c:211 [<ffffffff855b7e3c>] NF_HOOK_COND include/linux/netfilter.h:298 [inline] [<ffffffff855b7e3c>] ip6_output+0x2bc/0x3d0 net/ipv6/ip6_output.c:232 [<ffffffff8575d27f>] dst_output include/net/dst.h:444 [inline] [<ffffffff8575d27f>] ip6_local_out+0x10f/0x140 net/ipv6/output_core.c:161 [<ffffffff838bdae4>] ipvlan_process_v6_outbound drivers/net/ipvlan/ipvlan_core.c:483 [inline] [<ffffffff838bdae4>] ipvlan_process_outbound drivers/net/ipvlan/ipvlan_core.c:529 [inline] [<ffffffff838bdae4>] ipvlan_xmit_mode_l3 drivers/net/ipvlan/ipvlan_core.c:602 [inline] [<ffffffff838bdae4>] ipvlan_queue_xmit+0x1174/0x1be0 drivers/net/ipvlan/ipvlan_core.c:677 [<ffffffff838c2909>] ipvlan_start_xmit+0x49/0x100 drivers/net/ipvlan/ipvlan_main.c:229 [<ffffffff84d03900>] netdev_start_xmit include/linux/netdevice.h:4966 [inline] [<ffffffff84d03900>] xmit_one net/core/dev.c:3644 [inline] [<ffffffff84d03900>] dev_hard_start_xmit+0x320/0x980 net/core/dev.c:3660 [<ffffffff84d080e2>] __dev_queue_xmit+0x16b2/0x3370 net/core/dev.c:4324 [<ffffffff84d4a65e>] dev_queue_xmit include/linux/netdevice.h:3067 [inline] [<ffffffff84d4a65e>] neigh_resolve_output+0x64e/0x750 net/core/neighbour.c:1560 [<ffffffff855ce503>] neigh_output include/net/neighbour.h:545 [inline] [<ffffffff855ce503>] ip6_finish_output2+0x1643/0x1ae0 net/ipv6/ip6_output.c:139 [<ffffffff855b8616>] __ip6_finish_output net/ipv6/ip6_output.c:200 [inline] [<ffffffff855b8616>] ip6_finish_output+0x6c6/0xb10 net/ipv6/ip6_output.c:211 [<ffffffff855b7e3c>] NF_HOOK_COND include/linux/netfilter.h:298 [inline] [<ffffffff855b7e3c>] ip6_output+0x2bc/0x3d0 net/ipv6/ip6_output.c:232 [<ffffffff855b9ce4>] dst_output include/net/dst.h:444 [inline] [<ffffffff855b9ce4>] NF_HOOK include/linux/netfilter.h:309 [inline] [<ffffffff855b9ce4>] ip6_xmit+0x11a4/0x1b20 net/ipv6/ip6_output.c:352 [<ffffffff8597984e>] sctp_v6_xmit+0x9ae/0x1230 net/sctp/ipv6.c:250 [<ffffffff8594623e>] sctp_packet_transmit+0x25de/0x2bc0 net/sctp/output.c:653 [<ffffffff858f5142>] sctp_packet_singleton+0x202/0x310 net/sctp/outqueue.c:783 [<ffffffff858ea411>] sctp_outq_flush_ctrl net/sctp/outqueue.c:914 [inline] [<ffffffff858ea411>] sctp_outq_flush+0x661/0x3d40 net/sctp/outqueue.c:1212 [<ffffffff858f02f9>] sctp_outq_uncork+0x79/0xb0 net/sctp/outqueue.c:764 [<ffffffff8589f060>] sctp_side_effects net/sctp/sm_sideeffect.c:1199 [inline] [<ffffffff8589f060>] sctp_do_sm+0x55c0/0x5c30 net/sctp/sm_sideeffect.c:1170 [<ffffffff85941567>] sctp_primitive_ASSOCIATE+0x97/0xc0 net/sctp/primitive.c:73 [<ffffffff859408b2>] sctp_sendmsg_to_asoc+0xf62/0x17b0 net/sctp/socket.c:1839 [<ffffffff85910b5e>] sctp_sendmsg+0x212e/0x33b0 net/sctp/socket.c:2029 [<ffffffff8544d559>] inet_sendmsg+0x149/0x310 net/ipv4/af_inet.c:849 [<ffffffff84c6c4d2>] sock_sendmsg_nosec net/socket.c:716 [inline] [<ffffffff84c6c4d2>] sock_sendmsg net/socket.c:736 [inline] [<ffffffff84c6c4d2>] ____sys_sendmsg+0x572/0x8c0 net/socket.c:2504 [<ffffffff84c6ca91>] ___sys_sendmsg net/socket.c:2558 [inline] [<ffffffff84c6ca91>] __sys_sendmsg+0x271/0x360 net/socket.c:2587 [<ffffffff84c6cbff>] __do_sys_sendmsg net/socket.c:2596 [inline] [<ffffffff84c6cbff>] __se_sys_sendmsg net/socket.c:2594 [inline] [<ffffffff84c6cbff>] __x64_sys_sendmsg+0x7f/0x90 net/socket.c:2594 [<ffffffff85b32553>] do_syscall_x64 arch/x86/entry/common.c:51 [inline] [<ffffffff85b32553>] do_syscall_64+0x53/0x80 arch/x86/entry/common.c:84 [<ffffffff85c00087>] entry_SYSCALL_64_after_hwframe+0x63/0xcd Fixes: 2ad7bf363841 ("ipvlan: Initial check-in of the IPVLAN driver.") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Mahesh Bandewar <maheshb@google.com> Cc: Willem de Bruijn <willemb@google.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-27ipvlan: properly track tx_errorsEric Dumazet2-4/+5
Both ipvlan_process_v4_outbound() and ipvlan_process_v6_outbound() increment dev->stats.tx_errors in case of errors. Unfortunately there are two issues : 1) ipvlan_get_stats64() does not propagate dev->stats.tx_errors to user. 2) Increments are not atomic. KCSAN would complain eventually. Use DEV_STATS_INC() to not miss an update, and change ipvlan_get_stats64() to copy the value back to user. Fixes: 2ad7bf363841 ("ipvlan: Initial check-in of the IPVLAN driver.") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Mahesh Bandewar <maheshb@google.com> Link: https://lore.kernel.org/r/20231026131446.3933175-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-18ipvlan: Fix a reference count leak warning in ipvlan_ns_exit()Lu Wei1-1/+2
There are two network devices(veth1 and veth3) in ns1, and ipvlan1 with L3S mode and ipvlan2 with L2 mode are created based on them as figure (1). In this case, ipvlan_register_nf_hook() will be called to register nf hook which is needed by ipvlans in L3S mode in ns1 and value of ipvl_nf_hook_refcnt is set to 1. (1) ns1 ns2 ------------ ------------ veth1--ipvlan1 (L3S) veth3--ipvlan2 (L2) (2) ns1 ns2 ------------ ------------ veth1--ipvlan1 (L3S) ipvlan2 (L2) veth3 | | |------->-------->--------->-------- migrate When veth3 migrates from ns1 to ns2 as figure (2), veth3 will register in ns2 and calls call_netdevice_notifiers with NETDEV_REGISTER event: dev_change_net_namespace call_netdevice_notifiers ipvlan_device_event ipvlan_migrate_l3s_hook ipvlan_register_nf_hook(newnet) (I) ipvlan_unregister_nf_hook(oldnet) (II) In function ipvlan_migrate_l3s_hook(), ipvl_nf_hook_refcnt in ns1 is not 0 since veth1 with ipvlan1 still in ns1, (I) and (II) will be called to register nf_hook in ns2 and unregister nf_hook in ns1. As a result, ipvl_nf_hook_refcnt in ns1 is decreased incorrectly and this in ns2 is increased incorrectly. When the second net namespace is removed, a reference count leak warning in ipvlan_ns_exit() will be triggered. This patch add a check before ipvlan_migrate_l3s_hook() is called. The warning can be triggered as follows: $ ip netns add ns1 $ ip netns add ns2 $ ip netns exec ns1 ip link add veth1 type veth peer name veth2 $ ip netns exec ns1 ip link add veth3 type veth peer name veth4 $ ip netns exec ns1 ip link add ipv1 link veth1 type ipvlan mode l3s $ ip netns exec ns1 ip link add ipv2 link veth3 type ipvlan mode l2 $ ip netns exec ns1 ip link set veth3 netns ns2 $ ip net del ns2 Fixes: 3133822f5ac1 ("ipvlan: use pernet operations and restrict l3s hooks to master netns") Signed-off-by: Lu Wei <luwei32@huawei.com> Reviewed-by: Florian Westphal <fw@strlen.de> Link: https://lore.kernel.org/r/20230817145449.141827-1-luwei32@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-3/+6
Merge in late fixes to prepare for the 6.5 net-next PR. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-27ipvlan: Fix return value of ipvlan_queue_xmit()Cambda Zhu1-3/+6
ipvlan_queue_xmit() should return NET_XMIT_XXX, but ipvlan_xmit_mode_l2/l3() returns rx_handler_result_t or NET_RX_XXX in some cases. ipvlan_rcv_frame() will only return RX_HANDLER_CONSUMED in ipvlan_xmit_mode_l2/l3() because 'local' is true. It's equal to NET_XMIT_SUCCESS. But dev_forward_skb() can return NET_RX_SUCCESS or NET_RX_DROP, and returning NET_RX_DROP(NET_XMIT_DROP) will increase both ipvlan and ipvlan->phy_dev drops counter. The skb to forward can be treated as xmitted successfully. This patch makes ipvlan_queue_xmit() return NET_XMIT_SUCCESS for forward skb. Fixes: 2ad7bf363841 ("ipvlan: Initial check-in of the IPVLAN driver.") Signed-off-by: Cambda Zhu <cambda@linux.alibaba.com> Link: https://lore.kernel.org/r/20230626093347.7492-1-cambda@linux.alibaba.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-06-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-0/+4
Cross-merge networking fixes after downstream PR. Conflicts: include/linux/mlx5/driver.h 617f5db1a626 ("RDMA/mlx5: Fix affinity assignment") dc13180824b7 ("net/mlx5: Enable devlink port for embedded cpu VF vports") https://lore.kernel.org/all/20230613125939.595e50b8@canb.auug.org.au/ tools/testing/selftests/net/mptcp/mptcp_join.sh 47867f0a7e83 ("selftests: mptcp: join: skip check if MIB counter not supported") 425ba803124b ("selftests: mptcp: join: support RM_ADDR for used endpoints or not") 45b1a1227a7a ("mptcp: introduces more address related mibs") 0639fa230a21 ("selftests: mptcp: add explicit check for new mibs") https://lore.kernel.org/netdev/20230609-upstream-net-20230610-mptcp-selftests-support-old-kernels-part-3-v1-0-2896fe2ee8a3@tessares.net/ No adjacent changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-12ipvlan: fix bound dev checking for IPv6 l3s modeHangbin Liu1-0/+4
The commit 59a0b022aa24 ("ipvlan: Make skb->skb_iif track skb->dev for l3s mode") fixed ipvlan bonded dev checking by updating skb skb_iif. This fix works for IPv4, as in raw_v4_input() the dif is from inet_iif(skb), which is skb->skb_iif when there is no route. But for IPv6, the fix is not enough, because in ipv6_raw_deliver() -> raw_v6_match(), the dif is inet6_iif(skb), which is returns IP6CB(skb)->iif instead of skb->skb_iif if it's not a l3_slave. To fix the IPv6 part issue. Let's set IP6CB(skb)->iif to correct ifindex. BTW, ipvlan handles NS/NA specifically. Since it works fine, I will not reset IP6CB(skb)->iif when addr->atype is IPVL_ICMPV6. Fixes: c675e06a98a4 ("ipvlan: decouple l3s mode dependencies from other modes") Link: https://bugzilla.redhat.com/show_bug.cgi?id=2196710 Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-12ipvlan: Remove NULL check before dev_{put, hold}Yang Li1-2/+1
The call netdev_{put, hold} of dev_{put, hold} will check NULL, so there is no need to check before using dev_{put, hold}, remove it to silence the warning: ./drivers/net/ipvlan/ipvlan_core.c:559:3-11: WARNING: NULL check before dev_{put, hold} functions is not needed. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=4930 Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-10ipvlan:Fix out-of-bounds caused by unclear skb->cbt.feng1-0/+6
If skb enqueue the qdisc, fq_skb_cb(skb)->time_to_send is changed which is actually skb->cb, and IPCB(skb_in)->opt will be used in __ip_options_echo. It is possible that memcpy is out of bounds and lead to stack overflow. We should clear skb->cb before ip_local_out or ip6_local_out. v2: 1. clean the stack info 2. use IPCB/IP6CB instead of skb->cb crash on stable-5.10(reproduce in kasan kernel). Stack info: [ 2203.651571] BUG: KASAN: stack-out-of-bounds in __ip_options_echo+0x589/0x800 [ 2203.653327] Write of size 4 at addr ffff88811a388f27 by task swapper/3/0 [ 2203.655460] CPU: 3 PID: 0 Comm: swapper/3 Kdump: loaded Not tainted 5.10.0-60.18.0.50.h856.kasan.eulerosv2r11.x86_64 #1 [ 2203.655466] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.10.2-0-g5f4c7b1-20181220_000000-szxrtosci10000 04/01/2014 [ 2203.655475] Call Trace: [ 2203.655481] <IRQ> [ 2203.655501] dump_stack+0x9c/0xd3 [ 2203.655514] print_address_description.constprop.0+0x19/0x170 [ 2203.655530] __kasan_report.cold+0x6c/0x84 [ 2203.655586] kasan_report+0x3a/0x50 [ 2203.655594] check_memory_region+0xfd/0x1f0 [ 2203.655601] memcpy+0x39/0x60 [ 2203.655608] __ip_options_echo+0x589/0x800 [ 2203.655654] __icmp_send+0x59a/0x960 [ 2203.655755] nf_send_unreach+0x129/0x3d0 [nf_reject_ipv4] [ 2203.655763] reject_tg+0x77/0x1bf [ipt_REJECT] [ 2203.655772] ipt_do_table+0x691/0xa40 [ip_tables] [ 2203.655821] nf_hook_slow+0x69/0x100 [ 2203.655828] __ip_local_out+0x21e/0x2b0 [ 2203.655857] ip_local_out+0x28/0x90 [ 2203.655868] ipvlan_process_v4_outbound+0x21e/0x260 [ipvlan] [ 2203.655931] ipvlan_xmit_mode_l3+0x3bd/0x400 [ipvlan] [ 2203.655967] ipvlan_queue_xmit+0xb3/0x190 [ipvlan] [ 2203.655977] ipvlan_start_xmit+0x2e/0xb0 [ipvlan] [ 2203.655984] xmit_one.constprop.0+0xe1/0x280 [ 2203.655992] dev_hard_start_xmit+0x62/0x100 [ 2203.656000] sch_direct_xmit+0x215/0x640 [ 2203.656028] __qdisc_run+0x153/0x1f0 [ 2203.656069] __dev_queue_xmit+0x77f/0x1030 [ 2203.656173] ip_finish_output2+0x59b/0xc20 [ 2203.656244] __ip_finish_output.part.0+0x318/0x3d0 [ 2203.656312] ip_finish_output+0x168/0x190 [ 2203.656320] ip_output+0x12d/0x220 [ 2203.656357] __ip_queue_xmit+0x392/0x880 [ 2203.656380] __tcp_transmit_skb+0x1088/0x11c0 [ 2203.656436] __tcp_retransmit_skb+0x475/0xa30 [ 2203.656505] tcp_retransmit_skb+0x2d/0x190 [ 2203.656512] tcp_retransmit_timer+0x3af/0x9a0 [ 2203.656519] tcp_write_timer_handler+0x3ba/0x510 [ 2203.656529] tcp_write_timer+0x55/0x180 [ 2203.656542] call_timer_fn+0x3f/0x1d0 [ 2203.656555] expire_timers+0x160/0x200 [ 2203.656562] run_timer_softirq+0x1f4/0x480 [ 2203.656606] __do_softirq+0xfd/0x402 [ 2203.656613] asm_call_irq_on_stack+0x12/0x20 [ 2203.656617] </IRQ> [ 2203.656623] do_softirq_own_stack+0x37/0x50 [ 2203.656631] irq_exit_rcu+0x134/0x1a0 [ 2203.656639] sysvec_apic_timer_interrupt+0x36/0x80 [ 2203.656646] asm_sysvec_apic_timer_interrupt+0x12/0x20 [ 2203.656654] RIP: 0010:default_idle+0x13/0x20 [ 2203.656663] Code: 89 f0 5d 41 5c 41 5d 41 5e c3 cc cc cc cc cc cc cc cc cc cc cc cc cc 0f 1f 44 00 00 0f 1f 44 00 00 0f 00 2d 9f 32 57 00 fb f4 <c3> cc cc cc cc 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 41 54 be 08 [ 2203.656668] RSP: 0018:ffff88810036fe78 EFLAGS: 00000256 [ 2203.656676] RAX: ffffffffaf2a87f0 RBX: ffff888100360000 RCX: ffffffffaf290191 [ 2203.656681] RDX: 0000000000098b5e RSI: 0000000000000004 RDI: ffff88811a3c4f60 [ 2203.656686] RBP: 0000000000000000 R08: 0000000000000001 R09: ffff88811a3c4f63 [ 2203.656690] R10: ffffed10234789ec R11: 0000000000000001 R12: 0000000000000003 [ 2203.656695] R13: ffff888100360000 R14: 0000000000000000 R15: 0000000000000000 [ 2203.656729] default_idle_call+0x5a/0x150 [ 2203.656735] cpuidle_idle_call+0x1c6/0x220 [ 2203.656780] do_idle+0xab/0x100 [ 2203.656786] cpu_startup_entry+0x19/0x20 [ 2203.656793] secondary_startup_64_no_verify+0xc2/0xcb [ 2203.657409] The buggy address belongs to the page: [ 2203.658648] page:0000000027a9842f refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x11a388 [ 2203.658665] flags: 0x17ffffc0001000(reserved|node=0|zone=2|lastcpupid=0x1fffff) [ 2203.658675] raw: 0017ffffc0001000 ffffea000468e208 ffffea000468e208 0000000000000000 [ 2203.658682] raw: 0000000000000000 0000000000000000 00000001ffffffff 0000000000000000 [ 2203.658686] page dumped because: kasan: bad access detected To reproduce(ipvlan with IPVLAN_MODE_L3): Env setting: ======================================================= modprobe ipvlan ipvlan_default_mode=1 sysctl net.ipv4.conf.eth0.forwarding=1 iptables -t nat -A POSTROUTING -s 20.0.0.0/255.255.255.0 -o eth0 -j MASQUERADE ip link add gw link eth0 type ipvlan ip -4 addr add 20.0.0.254/24 dev gw ip netns add net1 ip link add ipv1 link eth0 type ipvlan ip link set ipv1 netns net1 ip netns exec net1 ip link set ipv1 up ip netns exec net1 ip -4 addr add 20.0.0.4/24 dev ipv1 ip netns exec net1 route add default gw 20.0.0.254 ip netns exec net1 tc qdisc add dev ipv1 root netem loss 10% ifconfig gw up iptables -t filter -A OUTPUT -p tcp --dport 8888 -j REJECT --reject-with icmp-port-unreachable ======================================================= And then excute the shell(curl any address of eth0 can reach): for((i=1;i<=100000;i++)) do ip netns exec net1 curl x.x.x.x:8888 done ======================================================= Fixes: 2ad7bf363841 ("ipvlan: Initial check-in of the IPVLAN driver.") Signed-off-by: "t.feng" <fengtao40@huawei.com> Suggested-by: Florian Westphal <fw@strlen.de> Reviewed-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-03Merge 6.3-rc5 into driver-core-nextGreg Kroah-Hartman1-0/+1
We need the fixes in here for testing, as well as the driver core changes for documentation updates to build on. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-17drivers: remove struct module * setting from struct classGreg Kroah-Hartman1-1/+0
There is no need to manually set the owner of a struct class, as the registering function does it automatically, so remove all of the explicit settings from various drivers that did so as it is unneeded. This allows us to remove this pointer entirely from this structure going forward. Cc: "Rafael J. Wysocki" <rafael@kernel.org> Link: https://lore.kernel.org/r/20230313181843.1207845-2-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-10ipvlan: Make skb->skb_iif track skb->dev for l3s modeJianguo Wu1-0/+1
For l3s mode, skb->dev is set to ipvlan interface in ipvlan_nf_input(): skb->dev = addr->master->dev but, skb->skb_iif remain unchanged, this will cause socket lookup failed if a target socket is bound to a interface, like the following example: ip link add ipvlan0 link eth0 type ipvlan mode l3s ip addr add dev ipvlan0 192.168.124.111/24 ip link set ipvlan0 up ping -c 1 -I ipvlan0 8.8.8.8 100% packet loss This is because there is no match sk in __raw_v4_lookup() as sk->sk_bound_dev_if != dif(skb->skb_iif). Fix this by make skb->skb_iif track skb->dev in ipvlan_nf_input(). Fixes: c675e06a98a4 ("ipvlan: decouple l3s mode dependencies from other modes") Signed-off-by: Jianguo Wu <wujianguo@chinatelecom.cn> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Link: https://lore.kernel.org/r/29865b1f-6db7-c07a-de89-949d3721ea30@163.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-01ipvlan: use skb_ip_totlen in ipvlan_get_L3_hdrXin Long1-1/+1
ipvlan devices calls netif_inherit_tso_max() to get the tso_max_size/segs from the lower device, so when lower device supports BIG TCP, the ipvlan devices support it too. We also should consider its iph tot_len accessing. Signed-off-by: Xin Long <lucien.xin@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-12-16Merge tag 'driver-core-6.2-rc1' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the set of driver core and kernfs changes for 6.2-rc1. The "big" change in here is the addition of a new macro, container_of_const() that will preserve the "const-ness" of a pointer passed into it. The "problem" of the current container_of() macro is that if you pass in a "const *", out of it can comes a non-const pointer unless you specifically ask for it. For many usages, we want to preserve the "const" attribute by using the same call. For a specific example, this series changes the kobj_to_dev() macro to use it, allowing it to be used no matter what the const value is. This prevents every subsystem from having to declare 2 different individual macros (i.e. kobj_const_to_dev() and kobj_to_dev()) and having the compiler enforce the const value at build time, which having 2 macros would not do either. The driver for all of this have been discussions with the Rust kernel developers as to how to properly mark driver core, and kobject, objects as being "non-mutable". The changes to the kobject and driver core in this pull request are the result of that, as there are lots of paths where kobjects and device pointers are not modified at all, so marking them as "const" allows the compiler to enforce this. So, a nice side affect of the Rust development effort has been already to clean up the driver core code to be more obvious about object rules. All of this has been bike-shedded in quite a lot of detail on lkml with different names and implementations resulting in the tiny version we have in here, much better than my original proposal. Lots of subsystem maintainers have acked the changes as well. Other than this change, included in here are smaller stuff like: - kernfs fixes and updates to handle lock contention better - vmlinux.lds.h fixes and updates - sysfs and debugfs documentation updates - device property updates All of these have been in the linux-next tree for quite a while with no problems" * tag 'driver-core-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (58 commits) device property: Fix documentation for fwnode_get_next_parent() firmware_loader: fix up to_fw_sysfs() to preserve const usb.h: take advantage of container_of_const() device.h: move kobj_to_dev() to use container_of_const() container_of: add container_of_const() that preserves const-ness of the pointer driver core: fix up missed drivers/s390/char/hmcdrv_dev.c class.devnode() conversion. driver core: fix up missed scsi/cxlflash class.devnode() conversion. driver core: fix up some missing class.devnode() conversions. driver core: make struct class.devnode() take a const * driver core: make struct class.dev_uevent() take a const * cacheinfo: Remove of_node_put() for fw_token device property: Add a blank line in Kconfig of tests device property: Rename goto label to be more precise device property: Move PROPERTY_ENTRY_BOOL() a bit down device property: Get rid of __PROPERTY_ENTRY_ARRAY_EL*SIZE*() kernfs: fix all kernel-doc warnings and multiple typos driver core: pass a const * into of_device_uevent() kobject: kset_uevent_ops: make name() callback take a const * kobject: kset_uevent_ops: make filter() callback take a const * kobject: make kobject_namespace take a const * ...
2022-11-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2-0/+3
tools/lib/bpf/ringbuf.c 927cbb478adf ("libbpf: Handle size overflow for ringbuf mmap") b486d19a0ab0 ("libbpf: checkpatch: Fixed code alignments in ringbuf.c") https://lore.kernel.org/all/20221121122707.44d1446a@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-18ipvlan: hold lower dev to avoid possible use-after-freeMahesh Bandewar2-0/+3
Recently syzkaller discovered the issue of disappearing lower device (NETDEV_UNREGISTER) while the virtual device (like macvlan) is still having it as a lower device. So it's just a matter of time similar discovery will be made for IPvlan device setup. So fixing it preemptively. Also while at it, add a refcount tracker. Fixes: 2ad7bf363841 ("ipvlan: Initial check-in of the IPVLAN driver.") Signed-off-by: Mahesh Bandewar <maheshb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-09driver core: class: make namespace and get_ownership take const *Greg Kroah-Hartman1-2/+2
The callbacks in struct class namespace() and get_ownership() do not modify the struct device passed to them, so mark the pointer as constant and fix up all callbacks in the kernel to have the correct function signature. This helps make it more obvious what calls and callbacks do, and do not, modify structures passed to them. Cc: "Rafael J. Wysocki" <rafael@kernel.org> Link: https://lore.kernel.org/r/20221001165426.2690912-1-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-10-28net: Remove the obsolte u64_stats_fetch_*_irq() users (drivers).Thomas Gleixner1-2/+2
Now that the 32bit UP oddity is gone and 32bit uses always a sequence count, there is no need for the fetch_irq() variants anymore. Convert to the regular interface. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-2/+4
drivers/net/ethernet/freescale/fec.h 7b15515fc1ca ("Revert "fec: Restart PPS after link state change"") 40c79ce13b03 ("net: fec: add stop mode support for imx8 platform") https://lore.kernel.org/all/20220921105337.62b41047@canb.auug.org.au/ drivers/pinctrl/pinctrl-ocelot.c c297561bc98a ("pinctrl: ocelot: Fix interrupt controller") 181f604b33cd ("pinctrl: ocelot: add ability to be used in a non-mmio configuration") https://lore.kernel.org/all/20220921110032.7cd28114@canb.auug.org.au/ tools/testing/selftests/drivers/net/bonding/Makefile bbb774d921e2 ("net: Add tests for bonding and team address list management") 152e8ec77640 ("selftests/bonding: add a test for bonding lladdr target") https://lore.kernel.org/all/20220921110437.5b7dbd82@canb.auug.org.au/ drivers/net/can/usb/gs_usb.c 5440428b3da6 ("can: gs_usb: gs_can_open(): fix race dev->can.state condition") 45dfa45f52e6 ("can: gs_usb: add RX and TX hardware timestamp support") https://lore.kernel.org/all/84f45a7d-92b6-4dc5-d7a1-072152fab6ff@tessares.net/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-09ipvlan: Fix out-of-bound bugs caused by unset skb->mac_headerLu Wei1-2/+4
If an AF_PACKET socket is used to send packets through ipvlan and the default xmit function of the AF_PACKET socket is changed from dev_queue_xmit() to packet_direct_xmit() via setsockopt() with the option name of PACKET_QDISC_BYPASS, the skb->mac_header may not be reset and remains as the initial value of 65535, this may trigger slab-out-of-bounds bugs as following: ================================================================= UG: KASAN: slab-out-of-bounds in ipvlan_xmit_mode_l2+0xdb/0x330 [ipvlan] PU: 2 PID: 1768 Comm: raw_send Kdump: loaded Not tainted 6.0.0-rc4+ #6 ardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-1.fc33 all Trace: print_address_description.constprop.0+0x1d/0x160 print_report.cold+0x4f/0x112 kasan_report+0xa3/0x130 ipvlan_xmit_mode_l2+0xdb/0x330 [ipvlan] ipvlan_start_xmit+0x29/0xa0 [ipvlan] __dev_direct_xmit+0x2e2/0x380 packet_direct_xmit+0x22/0x60 packet_snd+0x7c9/0xc40 sock_sendmsg+0x9a/0xa0 __sys_sendto+0x18a/0x230 __x64_sys_sendto+0x74/0x90 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd The root cause is: 1. packet_snd() only reset skb->mac_header when sock->type is SOCK_RAW and skb->protocol is not specified as in packet_parse_headers() 2. packet_direct_xmit() doesn't reset skb->mac_header as dev_queue_xmit() In this case, skb->mac_header is 65535 when ipvlan_xmit_mode_l2() is called. So when ipvlan_xmit_mode_l2() gets mac header with eth_hdr() which use "skb->head + skb->mac_header", out-of-bound access occurs. This patch replaces eth_hdr() with skb_eth_hdr() in ipvlan_xmit_mode_l2() and reset mac header in multicast to solve this out-of-bound bug. Fixes: 2ad7bf363841 ("ipvlan: Initial check-in of the IPVLAN driver.") Signed-off-by: Lu Wei <luwei32@huawei.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-31net: move from strlcpy with unused retval to strscpyWolfram Sang1-2/+2
Follow the advice of the below link and prefer 'strscpy' in this subsystem. Conversion is 1:1 because the return value is not used. Generated by a coccinelle script. Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/ Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for CAN Link: https://lore.kernel.org/r/20220830201457.7984-1-wsa+renesas@sang-engineering.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-23net: ipvtap - add __init/__exit annotations to module init/exit funcsMaciej Żenczykowski1-2/+2
Looks to have been left out in an oversight. Cc: Mahesh Bandewar <maheshb@google.com> Cc: Sainath Grandhi <sainath.grandhi@intel.com> Fixes: 235a9d89da97 ('ipvtap: IP-VLAN based tap driver') Signed-off-by: Maciej Żenczykowski <maze@google.com> Link: https://lore.kernel.org/r/20220821130808.12143-1-zenczykowski@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-06-09ipvlan: adopt u64_stats_tEric Dumazet3-17/+17
As explained in commit 316580b69d0a ("u64_stats: provide u64_stats_t type") we should use u64_stats_t and related accessors to avoid load/store tearing. Add READ_ONCE() when reading rx_errs & tx_drps. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-06net: add netif_inherit_tso_max()Jakub Kicinski1-4/+2
To make later patches smaller create a helper for inheriting the TSO limitations of a lower device. The TSO in the name is not an accident, subsequent patches will replace GSO with TSO in more names. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-11net: add per-cpu storage and net->core_statsEric Dumazet1-1/+1
Before adding yet another possibly contended atomic_long_t, it is time to add per-cpu storage for existing ones: dev->tx_dropped, dev->rx_dropped, and dev->rx_nohandler Because many devices do not have to increment such counters, allocate the per-cpu storage on demand, so that dev_get_stats() does not have to spend considerable time folding zero counters. Note that some drivers have abused these counters which were supposed to be only used by core networking stack. v4: should use per_cpu_ptr() in dev_get_stats() (Jakub) v3: added a READ_ONCE() in netdev_core_stats_alloc() (Paolo) v2: add a missing include (reported by kernel test robot <lkp@intel.com>) Change in netdev_core_stats_alloc() (Jakub) Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: jeffreyji <jeffreyji@google.com> Reviewed-by: Brian Vazquez <brianvv@google.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Paolo Abeni <pabeni@redhat.com> Link: https://lore.kernel.org/r/20220311051420.2608812-1-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-02ipvlan: Remove redundant if statementsXu Wang2-4/+2
The 'if (dev)' statement already move into dev_{put , hold}, so remove redundant if statements. Signed-off-by: Xu Wang <vulab@iscas.ac.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-22net: annotate accesses to dev->gso_max_segsEric Dumazet1-2/+2
dev->gso_max_segs is written under RTNL protection, or when the device is not yet visible, but is read locklessly. Add netif_set_gso_max_segs() helper. Add the READ_ONCE()/WRITE_ONCE() pairs, and use netif_set_gso_max_segs() where we can to better document what is going on. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-22net: annotate accesses to dev->gso_max_sizeEric Dumazet1-2/+2
dev->gso_max_size is written under RTNL protection, or when the device is not yet visible, but is read locklessly. Add the READ_ONCE()/WRITE_ONCE() pairs, and use netif_set_gso_max_size() where we can to better document what is going on. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-16net: ipvtap: fix template string argument of device_create() callJean Sacren1-1/+1
The last argument of device_create() call should be a template string. The tap_name variable should be the argument to the string, but not the argument of the call itself. We should add the template string and turn tap_name into its argument. Signed-off-by: Jean Sacren <sakiwit@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-02net: use eth_hw_addr_set() instead of ether_addr_copy()Jakub Kicinski1-1/+1
Convert from ether_addr_copy() to eth_hw_addr_set(): @@ expression dev, np; @@ - ether_addr_copy(dev->dev_addr, np) + eth_hw_addr_set(dev, np) Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-02net: use eth_hw_addr_set()Jakub Kicinski1-1/+1
Convert sw drivers from memcpy(... ETH_ADDR) to eth_hw_addr_set(): @@ expression dev, np; @@ - memcpy(dev->dev_addr, np, ETH_ALEN) + eth_hw_addr_set(dev, np) Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-29ipvlan: Add handling of NETDEV_UP eventsDi Zhu1-0/+1
When an ipvlan device is created on a bond device, the link state of the ipvlan device may be abnormal. This is because bonding device allows to add physical network card device in the down state and so NETDEV_CHANGE event will not be notified to other listeners, so ipvlan has no chance to update its link status. The following steps can cause such problems: 1) bond0 is down 2) ip link add link bond0 name ipvlan type ipvlan mode l2 3) echo +enp2s7 >/sys/class/net/bond0/bonding/slaves 4) ip link set bond0 up After these steps, use ip link command, we found ipvlan has NO-CARRIER: ipvlan@bond0: <NO-CARRIER, BROADCAST,MULTICAST,UP,M-DOWN> mtu ...> We can deal with this problem like VLAN: Add handling of NETDEV_UP events. If we receive NETDEV_UP event, we will update the link status of the ipvlan. Signed-off-by: Di Zhu <zhudi21@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-01-28ipvlan: remove h from printk format specifierTom Rix1-4/+2
This change fixes the checkpatch warning described in this commit commit cbacb5ab0aa0 ("docs: printk-formats: Stop encouraging use of unnecessary %h[xudi] and %hh[xudi]") Standard integer promotion is already done and %hx and %hhx is useless so do not encourage the use of %hh[xudi] or %h[xudi]. Cleanup output to use __func__ over explicit function strings. Signed-off-by: Tom Rix <trix@redhat.com> Link: https://lore.kernel.org/r/20210124190804.1964580-1-trix@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>