summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/mediatek/mt76/mt76.h
AgeCommit message (Collapse)AuthorFilesLines
2020-02-14mt76: mt76u: rename stat_wq in wqLorenzo Bianconi1-1/+1
Rename usb stat_wq in wq in order to be reused not just for gathering hw tx statistics Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-02-14mt76: mt76u: extend RX scatter gather numberSean Wang1-1/+1
Set RX scatter gather number to 4 in order to extend the maximum AMSDU size to 11,454. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-02-14mt76: fix rounding issues on converting per-chain and combined txpowerFelix Fietkau1-0/+7
Unify code converting between the different txpower values. Always add/remove the combined txpower delta before dividing half-dB values. Also fix the combined txpower delta values. The correct half-dB delta for 3 chains is 9, not 8. Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-02-14mt76: avoid extra RCU synchronization on station removalFelix Fietkau1-0/+2
Use sta_pre_rcu_remove callback to clear wcid pointer earlier Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-02-14mt76: mt7615: implement hardware reset supportFelix Fietkau1-0/+1
When the firmware detects a problem, it needs the host to stop/reset DMA and resume it again when the hardware state has been reset. Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-02-14mt76: mt76u: introduce MT_DRV_RX_DMA_HDR flagLorenzo Bianconi1-0/+1
Define MT_DRV_RX_DMA_HDR flag in drv_flag in order to not skip rx frame dma header since new devices (e.g. mt7663u) reports rx frame info in the usb dma header Co-developed-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-02-14mt76: mt76u: add endpoint to mt76u_bulk_msg signatureLorenzo Bianconi1-3/+3
This is a preliminary patch to support mt7663u usb dongles Co-developed-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-02-14mt76: mt76u: introduce mt76u_skb_dma_info routineLorenzo Bianconi1-0/+1
Introduce mt76u_skb_dma_info utility routine in mt76-usb module in order to be reused adding mt7663u support Co-developed-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-02-14mt76: mt76u: add {read/write}_extended utility routinesLorenzo Bianconi1-1/+5
Introduce extended utility routines to read/write data o usb bus. New devices (e.g. mt7663u) will rely on both upper and lower part of the register address. Add ext parameter to mt76u_init signature in order to reuse the code adding mt7663u support. Co-developed-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-02-14mt76: mt76u: introduce mt76u_alloc_mcu_queue utility routineLorenzo Bianconi1-0/+1
Add mt76u_alloc_mcu_queue utility routine to allocate mcu hw rx queue. This is a preliminary patch to support new devices (e.g. mt7663u) that rely on a hw queue for mcu messages Co-developed-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-02-14mt76: rely on mac80211 utility routines to compute airtimeLorenzo Bianconi1-4/+0
Rely on mac80211 airitme utility routines and remove mt76 duplicated code to estimate tx/rx airtime Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-02-14mt76: mt7615: measure channel noise and report it via surveyFelix Fietkau1-0/+2
Read measurements every 100 ms and build a simple moving average Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-02-14mt76: usb: use max packet length for m76u_copyStanislaw Gruszka1-4/+3
For transferring data over USB the optimal size is endpoint maxpacket. For my hardware maxpaket for control endpoint is 64 bytes and changing to this value from 128 bytes further shorten TBTT work time from 3ms to 1ms. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-02-14mt76: speed up usb bulk copyMarkus Theil1-1/+1
Use larger batches for usb copy to speed this operation up. Otherwise it would be too slow for copying new beacons or broadcast frames over usb. Assure, that always a multiple of 4 Bytes is copied, as outlined in 850e8f6fbd "mt76: round up length on mt76_wr_copy" from Felix Fietkau. Signed-off-by: Markus Theil <markus.theil@tu-ilmenau.de> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-02-14mt76: use AC specific reorder timeoutMarkus Theil1-0/+2
Before this patch, mt76 handled rx traffic for all TIDs equally, when released from reorder buffer early. This patch uses an AC specific reorder timeout, in order to release partial aggregated frames for video ACs earlier. Voice ACs are currently not aggregated (thanks to Felix for this hint). For example, ath10k also uses AC specific reorder timeouts (reported by firmware in that case). Signed-off-by: Markus Theil <markus.theil@tu-ilmenau.de> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-02-14mt76: move ampdu_ref from mt76_dev to driver structFelix Fietkau1-1/+0
It is only used by the driver Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-02-14mt76: add ext_phy field to struct mt76_wcidFelix Fietkau1-0/+1
Will be used to determine the phy from within the driver Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-02-14mt76: add function for allocating an extra wiphyFelix Fietkau1-0/+5
Unlike the core phy, this will have extra allocated memory for a driver private struct. Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-02-14mt76: add priv pointer to struct mt76_phyFelix Fietkau1-0/+1
Will be used for per-phy driver private data Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-02-14mt76: add multiple wiphy support to mt76_get_min_avg_rssiFelix Fietkau1-1/+1
Allow tracking clients of both wiphys separately Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-02-14mt76: move txpower and antenna mask to struct mt76_phyFelix Fietkau1-3/+3
Adds multiple wiphy support to mt76_get_txpower Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-02-14mt76: move txpower_conf back to driver specific structsFelix Fietkau1-1/+0
Nothing in the core uses it Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-02-14mt76: move chainmask back to driver specific structsFelix Fietkau1-1/+0
Nothing in the core uses it Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-02-14mt76: move state from struct mt76_dev to mt76_phyFelix Fietkau1-4/+11
Allows keeping per-wiphy state separate Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-02-14mt76: keep a set of software tx queues per phyFelix Fietkau1-2/+2
Allows tracking tx scheduling separately per phy Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-02-14mt76: move channel state to struct mt76_phyFelix Fietkau1-8/+11
Add support for an extra wiphy in mt76_set_channel and mt76_get_survey This is preparation for supporting multiple wiphys per device to support the concurrent dual-band feature of MT7615D Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-02-14mt76: add support for an extra wiphy in mt76_sta_state()Felix Fietkau1-0/+11
This is preparation for supporting multiple wiphys per device to support the concurrent dual-band feature of MT7615D Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-02-14mt76: add support for an extra wiphy in the tx status pathFelix Fietkau1-0/+17
This is preparation for supporting multiple wiphys per device to support the concurrent dual-band feature of MT7615D Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-02-14mt76: add support for an extra wiphy in the main tx pathFelix Fietkau1-3/+3
This is preparation for supporting multiple wiphys per device to support the concurrent dual-band feature of MT7615D Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-02-14mt76: add support for an extra wiphy in the rx pathFelix Fietkau1-0/+11
This is preparation for supporting multiple wiphys per device to support the concurrent dual-band feature of MT7615D Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-02-14mt76: introduce struct mt76_phyFelix Fietkau1-1/+8
This is preparation for supporting multiple wiphys per device to support the concurrent dual-band feature of MT7615D On the first wiphy, hw->priv will point to struct mt76_dev, which contains a struct mt76_phy at the start. For the secondary wiphy, hw->priv will point to a mt76_phy encapsulated in a driver specific struct To simplify access to struct mt76_phy members from drivers, the driver specific device struct is changed to add a union of struct mt76_dev and struct mt76_phy as the first element Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-11-20mt76: mt76u: fix endpoint definition orderLorenzo Bianconi1-1/+1
Even if they are not currently used fix BK/BE endpoint definition order. Fixes: b40b15e1521f ("mt76: add usb support to mt76 layer") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-11-20mt76: move mt76_get_antenna in mt76_core moduleLorenzo Bianconi1-0/+1
Move mt76_get_antenna in mac80211.c in order to be reused by all drivers. Initialize .get_antenna function pointer for mt76x0, mt7603, mt7615 and mt76x2u drivers Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-11-20mt76: use mt76_dev in mt76_is_{mmio,usb}Lorenzo Bianconi1-2/+2
Convert mt76_is_mmio and mt76_is_usb to rely on mt76_dev instead of mt76x02_dev since this is a property not strictly related to hw chipset and it will be more reusable Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-11-20mt76: mt76u: rely on a dedicated stats workqueueLorenzo Bianconi1-1/+3
rate controller and throughput are very sensitive to tx status timing. In order to improve performances when the system is heavily loaded, substitute stat_work delayed_work with a regular work_struct and create a mt76u dedicated workqueue for tx status reporting Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-11-20mt76: mt76u: rely on usb_interface instead of usb_devLorenzo Bianconi1-1/+2
usb drivers are supposed to communicate using usb_interface instead mt76x{0,2}u is now registering through usb_device. Fix it by passing usb_intf device to mt76_alloc_device routine. Fixes: 112f980ac8926 ("mt76usb: use usb_dev private data") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Tested-By: Zero_Chaos <sidhayn@gmail.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-11-20mt76: remove obsolete .add_buf() from struct mt76_queue_opsFelix Fietkau1-4/+0
It hasn't been used in a while Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-11-20mt76: mt7615: report tx_time, bss_rx and busy time to mac80211Lorenzo Bianconi1-0/+1
Report tx time/rx time and obss time from hw mib counters to fill survey info requested by mac80211 Co-developed-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-11-20mt76: mt76x02: track approximate tx airtime for airtime fairness and surveyFelix Fietkau1-0/+2
Estimate by calculating duration for EWMA packet size + estimated A-MPDU length on tx status events Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-11-20mt76: mt7603: track tx airtime for airtime fairness and surveyFelix Fietkau1-0/+2
Poll per-station hardware counters after tx status events Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-11-20mt76: track rx airtime for airtime fairness and surveyFelix Fietkau1-25/+39
Report total rx airtime for valid stations as BSS rx time in survey mt7615 is left out for now, it will be supported later by reading hardware counters instead of calculating airtime in software Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-11-20mt76: store current channel survey_state in struct mt76_devFelix Fietkau1-15/+1
Move mt76_channel_state() from mt76.h to mac80211.c Preparation for updating channel state from more places in the drivers/core Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-11-20mt76: rename mt76_driver_ops txwi_flags to drv_flags and include tx aligned4Felix Fietkau1-3/+3
This reduces the struct size and is useful for adding more flags later Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-11-20mt76: report rx a-mpdu subframe statusFelix Fietkau1-0/+3
This can be used in monitor mode to figure out which subframes were sent as part of which A-MPDU Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-11-20mt76: move aggr_stats array in mt76_devLorenzo Bianconi1-0/+2
Move aggr_stats array from mt76x02_dev to mt76_dev in order to be reused adding aggregation stats for mt7603/mt7615 drivers Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-11-20mt76: move queue debugfs entry to driver specific codeLorenzo Bianconi1-0/+1
Move queue debugfs entry to driver specific code since mt7615 devices rely on a different queue layout Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-11-20mt76: remove aggr_work field from struct mt76_wcidFelix Fietkau1-2/+0
It is unused Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-10-30mt76: dma: fix buffer unmap with non-linear skbsLorenzo Bianconi1-2/+3
mt76 dma layer is supposed to unmap skb data buffers while keep txwi mapped on hw dma ring. At the moment mt76 wrongly unmap txwi or does not unmap data fragments in even positions for non-linear skbs. This issue may result in hw hangs with A-MSDU if the system relies on IOMMU or SWIOTLB. Fix this behaviour properly unmapping data fragments on non-linear skbs. Fixes: 17f1de56df05 ("mt76: add common code shared between multiple chipsets") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-30mt76: mt76x2e: disable pcie_aspm by defaultLorenzo Bianconi1-0/+1
On same device (e.g. U7612E-H1) PCIE_ASPM causes continuous mcu hangs and instability. Since mt76x2 series does not manage PCIE PS states, first we try to disable ASPM using pci_disable_link_state. If it fails, we will disable PCIE PS configuring PCI registers. This patch has been successfully tested on U7612E-H1 mini-pice card Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-05mt76: make mt76_rx_convert staticStanislaw Gruszka1-2/+0
mt76_rx_convert() not need to be exported any longer. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
generated by cgit v1.2.3 (git 2.25.1) at 2025-08-19 00:52:12 +0000