summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/mediatek/mt76/mt7603
AgeCommit message (Collapse)AuthorFilesLines
2024-06-27Merge tag 'wireless-next-2024-06-27' of ↵Jakub Kicinski1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Johannes Berg says: ==================== Highlights this time are: - cfg80211/nl80211: * improvements for 6 GHz regulatory flexibility - mac80211: * use generic netdev stats * multi-link improvements/fixes - brcmfmac: * MFP support (to enable WPA3) - wilc1000: * suspend/resume improvements - iwlwifi: * remove support for older FW for new devices * fast resume (keeping the device configured) - wl18xx: * support newer firmware versions * tag 'wireless-next-2024-06-27' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (100 commits) wifi: brcmfmac: of: Support interrupts-extended wifi: brcmsmac: advertise MFP_CAPABLE to enable WPA3 net: rfkill: Correct return value in invalid parameter case wifi: mac80211: fix NULL dereference at band check in starting tx ba session wifi: iwlwifi: mvm: fix rs.h kernel-doc wifi: iwlwifi: fw: api: datapath: fix kernel-doc wifi: iwlwifi: fix remaining mistagged kernel-doc comments wifi: iwlwifi: fix prototype mismatch kernel-doc warnings wifi: iwlwifi: fix kernel-doc in iwl-fh.h wifi: iwlwifi: fix kernel-doc in iwl-trans.h wifi: iwlwifi: pcie: fix kernel-doc wifi: iwlwifi: dvm: fix kernel-doc warnings wifi: iwlwifi: mvm: don't log error for failed UATS table read wifi: iwlwifi: trans: make bad state warnings wifi: iwlwifi: fw: api: fix some kernel-doc wifi: iwlwifi: mvm: remove init_dbg module parameter wifi: iwlwifi: update the BA notification API wifi: iwlwifi: mvm: always unblock EMLSR on ROC end wifi: iwlwifi: mvm: use IWL_FW_CHECK for link ID check wifi: iwlwifi: mvm: don't flush BSSes on restart with MLD API ... ==================== Link: https://patch.msgid.link/20240627114135.28507-3-johannes@sipsolutions.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-26wifi: mac80211: inform the low level if drv_stop() is a suspendEmmanuel Grumbach1-1/+1
This will allow the low level driver to take different actions for different flows. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240618192529.739036208b6e.Ie18a2fe8e02bf2717549d39420b350cfdaf3d317@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-06-20wifi: mt76: un-embedd netdev from mt76_devBreno Leitao1-1/+1
Embedding net_device into structures prohibits the usage of flexible arrays in the net_device structure. For more details, see the discussion at [1]. Un-embed the net_devices from struct mt76_dev by converting them into pointers, and allocating them dynamically. Use the leverage alloc_netdev_dummy() to allocate the net_device object at mt76_dma_init(). The free of the device occurs at mt76_dma_cleanup(). Link: https://lore.kernel.org/all/20240229225910.79e224cf@kernel.org/ [1] Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Breno Leitao <leitao@debian.org> Acked-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20240619105311.3144908-1-leitao@debian.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-02wifi: mt76: mt7603: add wpdma tx eof flag for PSE client resetFelix Fietkau1-0/+1
This flag is needed for the PSE client reset. Fixes watchdog reset issues. Fixes: c677dda16523 ("wifi: mt76: mt7603: improve watchdog reset reliablity") Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-05-02wifi: mt76: mt7603: fix tx queue of loopback packetsFelix Fietkau1-14/+32
Use the correct WMM AC queue instead of the MGMT one to fix potential issues with aggregation sequence number tracking. Drop non-bufferable packets. Fixes: fca9615f1a43 ("mt76: mt7603: fix up hardware queue index for PS filtered packets") Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-02-08wifi: mac80211: simplify non-chanctx driversJohannes Berg1-0/+4
There are still surprisingly many non-chanctx drivers, but in mac80211 that code is a bit awkward. Simplify this by having those drivers assign 'emulated' ops, so that the mac80211 code can be more unified between non-chanctx/chanctx drivers. This cuts the number of places caring about it by about 15, which are scattered across - now they're fewer and no longer in the channel context handling. Link: https://msgid.link/20240129194108.6d0ead50f5cf.I60d093b2fc81ca1853925a4d0ac3a2337d5baa5b@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-01-31wifi: fill in MODULE_DESCRIPTION()s for mt76 driversBreno Leitao1-0/+1
W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to the MediaTek mt76 drivers. Here is a sorted list of descriptions. It might make the reviewing process easier. MODULE_DESCRIPTION("MediaTek MT7603E and MT76x8 wireless driver"); MODULE_DESCRIPTION("MediaTek MT7615E and MT7663E wireless driver"); MODULE_DESCRIPTION("MediaTek MT7615E MMIO helpers"); MODULE_DESCRIPTION("MediaTek MT7663 SDIO/USB helpers"); MODULE_DESCRIPTION("MediaTek MT7663S (SDIO) wireless driver"); MODULE_DESCRIPTION("MediaTek MT7663U (USB) wireless driver"); MODULE_DESCRIPTION("MediaTek MT76x02 helpers"); MODULE_DESCRIPTION("MediaTek MT76x02 MCU helpers"); MODULE_DESCRIPTION("MediaTek MT76x0E (PCIe) wireless driver"); MODULE_DESCRIPTION("MediaTek MT76x0U (USB) wireless driver"); MODULE_DESCRIPTION("MediaTek MT76x2 EEPROM helpers"); MODULE_DESCRIPTION("MediaTek MT76x2E (PCIe) wireless driver"); MODULE_DESCRIPTION("MediaTek MT76x2U (USB) wireless driver"); MODULE_DESCRIPTION("MediaTek MT76x connac layer helpers"); MODULE_DESCRIPTION("MediaTek MT76x EEPROM helpers"); MODULE_DESCRIPTION("MediaTek MT76x helpers"); MODULE_DESCRIPTION("MediaTek MT76x SDIO helpers"); MODULE_DESCRIPTION("MediaTek MT76x USB helpers"); MODULE_DESCRIPTION("MediaTek MT7915E MMIO helpers"); MODULE_DESCRIPTION("MediaTek MT7921 core driver"); MODULE_DESCRIPTION("MediaTek MT7921E (PCIe) wireless driver"); MODULE_DESCRIPTION("MediaTek MT7921S (SDIO) wireless driver"); MODULE_DESCRIPTION("MediaTek MT7921U (USB) wireless driver"); MODULE_DESCRIPTION("MediaTek MT7925 core driver"); MODULE_DESCRIPTION("MediaTek MT7925E (PCIe) wireless driver"); MODULE_DESCRIPTION("MediaTek MT7925U (USB) wireless driver"); MODULE_DESCRIPTION("MediaTek MT792x core driver"); MODULE_DESCRIPTION("MediaTek MT792x USB helpers"); MODULE_DESCRIPTION("MediaTek MT7996 MMIO helpers"); Signed-off-by: Breno Leitao <leitao@debian.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240130104243.3025393-10-leitao@debian.org
2023-12-07wifi: mt76: Convert to platform remove callback returning voidUwe Kleine-König1-5/+2
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert the three mt76 drivers from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-07wifi: mt76: introduce wed pointer in mt76_queueLorenzo Bianconi1-4/+5
Introduce mtk_wed_device pointer in mt76_queue structure in order to configure WED chip. Get rid of dev parameter in Q_READ and Q_WRITE macros. Introduce wed parameter to the following routine signatures: - mt76_init_queue - mt76_init_tx_queue This is a preliminary patch to introduce WED support for mt7996 since mt7996 runs two separate WED chips. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-30wifi: mt76: fix race condition related to checking tx queue fill statusFelix Fietkau1-2/+2
When drv_tx calls race against local tx scheduling, the queue fill status checks can potentially race, leading to dma queue entries being overwritten. Fix this by deferring packets from drv_tx calls to the tx worker, in order to ensure that all regular queue tx comes from the same context. Reported-by: Ryder Lee <Ryder.Lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-30wifi: mt76: mt7603: disable A-MSDU tx support on MT7628Felix Fietkau1-0/+1
It was reported that this can cause the PSE hang issues, even with a low number of fragments. Link: https://github.com/openwrt/mt76/issues/793#issuecomment-1676529138 Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-30wifi: mt76: mt7603: add missing register initialization for MT7628Felix Fietkau1-0/+7
Ported from the vendor driver code Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-30wifi: mt76: mt7603: improve stuck beacon handlingFelix Fietkau2-21/+60
Before preparing the new beacon, check the queue status, flush out all previous beacons and buffered multicast packets, then (if necessary) try to recover more gracefully from a stuck beacon condition by making a less invasive attempt at getting the MAC un-stuck. Fixes: c8846e101502 ("mt76: add driver for MT7603E and MT7628/7688") Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-30wifi: mt76: mt7603: improve watchdog reset reliablityFelix Fietkau1-17/+12
Only trigger PSE reset if PSE was stuck, otherwise it can cause DMA issues. Trigger the PSE reset while DMA is fully stopped in order to improve reliabilty. Fixes: c8846e101502 ("mt76: add driver for MT7603E and MT7628/7688") Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-30wifi: mt76: mt7603: rework/fix rx pse hang checkFelix Fietkau2-7/+18
It turns out that the code in mt7603_rx_pse_busy() does not detect actual hardware hangs, it only checks for busy conditions in PSE. A reset should only be performed if these conditions are true and if there is no rx activity as well. Reset the counter whenever a rx interrupt occurs. In order to also deal with a fully loaded CPU that leaves interrupts disabled with continuous NAPI polling, also check for pending rx interrupts in the function itself. Fixes: c8846e101502 ("mt76: add driver for MT7603E and MT7628/7688") Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-08-25Fix nomenclature for USB and PCI wireless devicesAlan Stern1-1/+1
A mouse that uses a USB connection is called a "USB mouse" device (or "USB mouse" for short), not a "mouse USB" device. By analogy, a WiFi adapter that connects to the host computer via USB is a "USB wireless" device, not a "wireless USB" device. (The latter term more properly refers to a defunct Wireless USB specification, which described a technology for sending USB protocol messages over an ultra wideband radio link.) Similarly for a WiFi adapter card that plugs into a PCIe slot: It is a "PCIe wireless" device, not a "wireless PCIe" device. Rephrase the text in the kernel source where the word ordering is wrong. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/57da7c80-0e48-41b5-8427-884a02648f55@rowland.harvard.edu
2023-07-26wifi: mt76: mt7603: fix tx filter/flush functionFelix Fietkau4-7/+28
Setting MT_TX_ABORT does not abort any transmission for a wtbl index on its own. Instead, it modifies the behavior of a queue flush to make it selectively flush packets for a particular wtbl index. Adjust powersave filtering to make use of this in order to avoid running into unnecessary timeouts while flushing Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-07-26wifi: mt76: mt7603: fix beacon interval after disabling a single vifFelix Fietkau1-1/+2
When disabling beacons on a vif, intval is 0. Ensure that dev->mt76.beacon_int is not overwritten in this case, so that beacons continue to work for other interfaces. Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-07-25wifi: mt76: mt7603: rely on shared poll_list fieldLorenzo Bianconi3-11/+10
Rely on poll_list field in mt76_wcid structure and get rid of private copy. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-07-25wifi: mt76: mt7603: rely on shared sta_poll_list and sta_poll_lockLorenzo Bianconi4-18/+13
Rely on sta_poll_list and sta_poll_lock fields in mt76_dev structure and get rid of private copies. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-21Merge tag 'wireless-next-2023-04-21' of ↵Jakub Kicinski1-1/+4
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Kalle Valo says: ==================== wireless-next patches for v6.4 Most likely the last -next pull request for v6.4. We have changes all over. rtw88 now supports SDIO bus and iwlwifi continues to work on Wi-Fi 7 support. Not much stack changes this time. Major changes: cfg80211/mac80211 - fix some Fine Time Measurement (FTM) frames not being bufferable - flush frames before key removal to avoid potential unencrypted transmission depending on the hardware design iwlwifi - preparation for Wi-Fi 7 EHT and multi-link support rtw88 - SDIO bus support - RTL8822BS, RTL8822CS and RTL8821CS SDIO chipset support rtw89 - framework firmware backwards compatibility brcmfmac - Cypress 43439 SDIO support mt76 - mt7921 P2P support - mt7996 mesh A-MSDU support - mt7996 EHT support - mt7996 coredump support wcn36xx - support for pronto v3 hardware ath11k - PCIe DeviceTree bindings - WCN6750: enable SAR support ath10k - convert DeviceTree bindings to YAML * tag 'wireless-next-2023-04-21' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (261 commits) wifi: rtw88: Update spelling in main.h wifi: airo: remove ISA_DMA_API dependency wifi: rtl8xxxu: Simplify setting the initial gain wifi: rtl8xxxu: Add rtl8xxxu_write{8,16,32}_{set,clear} wifi: rtl8xxxu: Don't print the vendor/product/serial wifi: rtw88: Fix memory leak in rtw88_usb wifi: rtw88: call rtw8821c_switch_rf_set() according to chip variant wifi: rtw88: set pkg_type correctly for specific rtw8821c variants wifi: rtw88: rtw8821c: Fix rfe_option field width wifi: rtw88: usb: fix priority queue to endpoint mapping wifi: rtw88: 8822c: add iface combination wifi: rtw88: handle station mode concurrent scan with AP mode wifi: rtw88: prevent scan abort with other VIFs wifi: rtw88: refine reserved page flow for AP mode wifi: rtw88: disallow PS during AP mode wifi: rtw88: 8822c: extend reserved page number wifi: rtw88: add port switch for AP mode wifi: rtw88: add bitmap for dynamic port settings wifi: rtw89: mac: use regular int as return type of DLE buffer request wifi: mac80211: remove return value check of debugfs_create_dir() ... ==================== Link: https://lore.kernel.org/r/20230421104726.800BCC433D2@smtp.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-17wifi: mt76: add missing locking to protect against concurrent rx/status callsFelix Fietkau1-1/+4
According to the documentation, ieee80211_rx_list must not run concurrently with ieee80211_tx_status (or its variants). Cc: stable@vger.kernel.org Fixes: 88046b2c9f6d ("mt76: add support for reporting tx status with skb") Reported-by: Brian Coverstone <brian@mainsequence.net> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-03wifi: mt76: ignore key disable commandsFelix Fietkau1-5/+5
This helps avoid cleartext leakage of already queued or powersave buffered packets, when a reassoc triggers the key deletion. Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230330091259.61378-1-nbd@nbd.name
2023-02-03wifi: mt76: mt7603: avoid mcu_restart function pointerLorenzo Bianconi1-2/+1
Run mt7603_mcu_restart routine directly and avoid mcu_restart function pointer whenever it is possible. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-12-09wifi: mt76: move leds struct in mt76_phyLorenzo Bianconi1-15/+15
Move leds struct in mt76_phy in order to have leds associated to phy (e.g. in dbdc mode) instead of per device. Tested-by: Frank Wunderlich <frank-w@public-files.de> Co-developed-by: Ryder Lee <ryder.Lee@mediatek.com> Signed-off-by: Ryder Lee <ryder.Lee@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-12-09wifi: mt76: move leds field in leds structLorenzo Bianconi1-10/+10
This is a preliminary patch to support per-phy leds. Tested-by: Frank Wunderlich <frank-w@public-files.de> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-12-01wifi: mt76: add info parameter to rx_skb signatureSujuan Chen2-2/+2
This is a preliminary patch to introduce WED RX support for mt7915. Tested-by: Daniel Golle <daniel@makrotopia.org> Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-12-01wifi: mt76: move aggr_stats array in mt76_phyLorenzo Bianconi2-4/+4
Move aggregation stats array per-phy instead of share it between multiple interfaces. This is a preliminary patch to add mt7996 driver support. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-09-06wifi: mac80211: make smps_mode per-linkBenjamin Berg1-1/+1
The SMPS power save mode needs to be per-link rather than being shared for all links. As such, move it into struct ieee80211_link_sta. Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-18Merge tag 'mt76-for-kvalo-2022-07-11' of https://github.com/nbd168/wirelessKalle Valo1-3/+3
mt76 patches for 5.20 - preparation for new chipset support - fixes - VHT/HE related improvements - ACPI SAR support [kvalo@kernel.org: fix mac80211 API changes in start_ap() and stop_ap()]
2022-07-15wifi: mac80211: change QoS settings API to take link into accountJohannes Berg1-1/+2
Take the link into account in the QoS settings (EDCA parameters) APIs. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-11mt76: pass original queue id from __mt76_tx_queue_skb to the driverFelix Fietkau1-3/+3
MT7615 and newer map multiple software tx queues to the hardware id Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-06-20wifi: mac80211: return a beacon for a specific linkShaul Triebitz1-1/+1
Pass the link id through to the get_beacon and return the beacon for a specific link id. Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-06-20wifi: mac80211: split bss_info_changed methodJohannes Berg1-1/+1
Split the bss_info_changed method to vif_cfg_changed and link_info_changed, with the latter getting a link ID. Also change the 'changed' parameter to u64 already, we know we need that. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-06-20wifi: mac80211: move interface config to new structJohannes Berg1-1/+1
We'll use bss_conf for per-link configuration later, so move out all the non-link-specific data out into a new struct ieee80211_vif_cfg used in the vif. Some adjustments were done with the following spatch: @@ expression sdata; struct ieee80211_vif *vifp; identifier var = { assoc, ibss_joined, aid, arp_addr_list, arp_addr_cnt, ssid, ssid_len, s1g, ibss_creator }; @@ ( -sdata->vif.bss_conf.var +sdata->vif.cfg.var | -vifp->bss_conf.var +vifp->cfg.var ) @bss_conf@ struct ieee80211_bss_conf *bss_conf; identifier var = { assoc, ibss_joined, aid, arp_addr_list, arp_addr_cnt, ssid, ssid_len, s1g, ibss_creator }; @@ -bss_conf->var +vif_cfg->var (though more manual fixups were needed, e.g. replacing "vif_cfg->" by "vif->cfg." in many files.) Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-05-13mt76: mt7915: add Wireless Ethernet Dispatch supportFelix Fietkau1-4/+4
This is used to support hardware flow offloading from Ethernet to WLAN Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-05-13mt76: mt7603: move spin_lock_bh() to spin_lock()Yunbo Yu1-4/+4
It is unnecessary to call spin_lock_bh() within a tasklet. Signed-off-by: Yunbo Yu <yuyunbo519@gmail.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-05-13mt76: fix MBSS index condition in DBDC modeEvelyn Tsai1-3/+3
MT7915_MAX_INTERFACES is per-band declaration in MT7915/MT7986/MT7916. Enlarge vif_mask to 64 bits wide, including the bit operation. Reviewed-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Evelyn Tsai <evelyn.tsai@mediatek.com> Signed-off-by: Bo Jiao <bo.jiao@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-05-13mt76: fix use-after-free by removing a non-RCU wcid pointerFelix Fietkau1-1/+1
Fixes an issue caught by KASAN about use-after-free in mt76_txq_schedule by protecting mtxq->wcid with rcu_lock between mt76_txq_schedule and sta_info_[alloc, free]. [18853.876689] ================================================================== [18853.876751] BUG: KASAN: use-after-free in mt76_txq_schedule+0x204/0xaf8 [mt76] [18853.876773] Read of size 8 at addr ffffffaf989a2138 by task mt76-tx phy0/883 [18853.876786] [18853.876810] CPU: 5 PID: 883 Comm: mt76-tx phy0 Not tainted 5.10.100-fix-510-56778d365941-kasan #5 0b01fbbcf41a530f52043508fec2e31a4215 [18853.876840] Call trace: [18853.876861] dump_backtrace+0x0/0x3ec [18853.876878] show_stack+0x20/0x2c [18853.876899] dump_stack+0x11c/0x1ac [18853.876918] print_address_description+0x74/0x514 [18853.876934] kasan_report+0x134/0x174 [18853.876948] __asan_report_load8_noabort+0x44/0x50 [18853.876976] mt76_txq_schedule+0x204/0xaf8 [mt76 074e03e4640e97fe7405ee1fab547b81c4fa45d2] [18853.877002] mt76_txq_schedule_all+0x2c/0x48 [mt76 074e03e4640e97fe7405ee1fab547b81c4fa45d2] [18853.877030] mt7921_tx_worker+0xa0/0x1cc [mt7921_common f0875ebac9d7b4754e1010549e7db50fbd90a047] [18853.877054] __mt76_worker_fn+0x190/0x22c [mt76 074e03e4640e97fe7405ee1fab547b81c4fa45d2] [18853.877071] kthread+0x2f8/0x3b8 [18853.877087] ret_from_fork+0x10/0x30 [18853.877098] [18853.877112] Allocated by task 941: [18853.877131] kasan_save_stack+0x38/0x68 [18853.877147] __kasan_kmalloc+0xd4/0xfc [18853.877163] kasan_kmalloc+0x10/0x1c [18853.877177] __kmalloc+0x264/0x3c4 [18853.877294] sta_info_alloc+0x460/0xf88 [mac80211] [18853.877410] ieee80211_prep_connection+0x204/0x1ee0 [mac80211] [18853.877523] ieee80211_mgd_auth+0x6c4/0xa4c [mac80211] [18853.877635] ieee80211_auth+0x20/0x2c [mac80211] [18853.877733] rdev_auth+0x7c/0x438 [cfg80211] [18853.877826] cfg80211_mlme_auth+0x26c/0x390 [cfg80211] [18853.877919] nl80211_authenticate+0x6d4/0x904 [cfg80211] [18853.877938] genl_rcv_msg+0x748/0x93c [18853.877954] netlink_rcv_skb+0x160/0x2a8 [18853.877969] genl_rcv+0x3c/0x54 [18853.877985] netlink_unicast_kernel+0x104/0x1ec [18853.877999] netlink_unicast+0x178/0x268 [18853.878015] netlink_sendmsg+0x3cc/0x5f0 [18853.878030] sock_sendmsg+0xb4/0xd8 [18853.878043] ____sys_sendmsg+0x2f8/0x53c [18853.878058] ___sys_sendmsg+0xe8/0x150 [18853.878071] __sys_sendmsg+0xc4/0x1f4 [18853.878087] __arm64_compat_sys_sendmsg+0x88/0x9c [18853.878101] el0_svc_common+0x1b4/0x390 [18853.878115] do_el0_svc_compat+0x8c/0xdc [18853.878131] el0_svc_compat+0x10/0x1c [18853.878146] el0_sync_compat_handler+0xa8/0xcc [18853.878161] el0_sync_compat+0x188/0x1c0 [18853.878171] [18853.878183] Freed by task 10927: [18853.878200] kasan_save_stack+0x38/0x68 [18853.878215] kasan_set_track+0x28/0x3c [18853.878228] kasan_set_free_info+0x24/0x48 [18853.878244] __kasan_slab_free+0x11c/0x154 [18853.878259] kasan_slab_free+0x14/0x24 [18853.878273] slab_free_freelist_hook+0xac/0x1b0 [18853.878287] kfree+0x104/0x390 [18853.878402] sta_info_free+0x198/0x210 [mac80211] [18853.878515] __sta_info_destroy_part2+0x230/0x2d4 [mac80211] [18853.878628] __sta_info_flush+0x300/0x37c [mac80211] [18853.878740] ieee80211_set_disassoc+0x2cc/0xa7c [mac80211] [18853.878851] ieee80211_mgd_deauth+0x4a4/0x10a0 [mac80211] [18853.878962] ieee80211_deauth+0x20/0x2c [mac80211] [18853.879057] rdev_deauth+0x7c/0x438 [cfg80211] [18853.879150] cfg80211_mlme_deauth+0x274/0x414 [cfg80211] [18853.879243] cfg80211_mlme_down+0xe4/0x118 [cfg80211] [18853.879335] cfg80211_disconnect+0x218/0x2d8 [cfg80211] [18853.879427] __cfg80211_leave+0x17c/0x240 [cfg80211] [18853.879519] cfg80211_leave+0x3c/0x58 [cfg80211] [18853.879611] wiphy_suspend+0xdc/0x200 [cfg80211] [18853.879628] dpm_run_callback+0x58/0x408 [18853.879642] __device_suspend+0x4cc/0x864 [18853.879658] async_suspend+0x34/0xf4 [18853.879673] async_run_entry_fn+0xe0/0x37c [18853.879689] process_one_work+0x508/0xb98 [18853.879702] worker_thread+0x7f4/0xcd4 [18853.879717] kthread+0x2f8/0x3b8 [18853.879731] ret_from_fork+0x10/0x30 [18853.879741] [18853.879757] The buggy address belongs to the object at ffffffaf989a2000 [18853.879757] which belongs to the cache kmalloc-8k of size 8192 [18853.879774] The buggy address is located 312 bytes inside of [18853.879774] 8192-byte region [ffffffaf989a2000, ffffffaf989a4000) [18853.879787] The buggy address belongs to the page: [18853.879807] page:000000004bda2a59 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1d89a0 [18853.879823] head:000000004bda2a59 order:3 compound_mapcount:0 compound_pincount:0 [18853.879839] flags: 0x8000000000010200(slab|head) [18853.879857] raw: 8000000000010200 ffffffffbc89e208 ffffffffb7fb5208 ffffffaec000cc80 [18853.879873] raw: 0000000000000000 0000000000010001 00000001ffffffff 0000000000000000 [18853.879885] page dumped because: kasan: bad access detected [18853.879896] [18853.879907] Memory state around the buggy address: [18853.879922] ffffffaf989a2000: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [18853.879935] ffffffaf989a2080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [18853.879948] >ffffffaf989a2100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [18853.879961] ^ [18853.879973] ffffffaf989a2180: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [18853.879986] ffffffaf989a2200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [18853.879998] ================================================================== Cc: stable@vger.kernel.org Reported-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-05-06mt76: switch to netif_napi_add_tx()Jakub Kicinski1-2/+2
Switch to the new API not requiring passing in NAPI_POLL_WEIGHT. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220504163316.549648-3-kuba@kernel.org
2022-04-11mac80211: prepare sta handling for MLO supportSriram R1-7/+9
Currently in mac80211 each STA object is represented using sta_info datastructure with the associated STA specific information and drivers access ieee80211_sta part of it. With MLO (Multi Link Operation) support being added in 802.11be standard, though the association is logically with a single Multi Link capable STA, at the physical level communication can happen via different advertised links (uniquely identified by Channel, operating class, BSSID) and hence the need to handle multiple link STA parameters within a composite sta_info object called the MLD STA. The different link STA part of MLD STA are identified using the link address which can be same or different as the MLD STA address and unique link id based on the link vif. To support extension of such a model, the sta_info datastructure is modified to hold multiple link STA objects with link specific params currently within sta_info moved to this new structure. Similarly this is done for ieee80211_sta as well which will be accessed within mac80211 as well as by drivers, hence trivial driver changes are expected to support this. For current non MLO supported drivers, only one link STA is present and link information is accessed via 'deflink' member. For MLO drivers, we still need to define the APIs etc. to get the correct link ID and access the correct part of the station info. Currently in mac80211, all link STA info are accessed directly via deflink. These will be updated to access via link pointers indexed by link id with MLO support patches, with link id being 0 for non MLO supported cases. Except for couple of macro related changes, below spatch takes care of updating mac80211 and driver code to access to the link STA info via deflink. @ieee80211_sta@ struct ieee80211_sta *s; struct sta_info *si; identifier var = {supp_rates, ht_cap, vht_cap, he_cap, he_6ghz_capa, eht_cap, rx_nss, bandwidth, txpwr}; @@ ( s-> - var + deflink.var | si->sta. - var + deflink.var ) @sta_info@ struct sta_info *si; identifier var = {gtk, pcpu_rx_stats, rx_stats, rx_stats_avg, status_stats, tx_stats, cur_max_bandwidth}; @@ ( si-> - var + deflink.var ) Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Link: https://lore.kernel.org/r/1649086883-13246-1-git-send-email-quic_srirrama@quicinc.com [remove MLO-drivers notes from commit message, not clear yet; run spatch] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-03-16mt76: use le32/16_get_bits() whenever possibleRyder Lee2-7/+4
Switch to use le32/16_get_bits() to simplfy codes and specify the size explicitly to avoid potential issues. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-24mt76: improve signal strength reportingFelix Fietkau1-5/+0
Instead of just taking the maximum per-chain signal strength values, add an approximation for the sum of the combined signal. This should more accurately reflect the real signal strength, especially if the per-chain signal strength values are close to each other Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-02-03mt76: mt7603: check sta_rates pointer in mt7603_sta_rate_tbl_updateLorenzo Bianconi1-0/+3
Check sta_rates pointer value in mt7603_sta_rate_tbl_update routine since minstrel_ht_update_rates can fail allocating rates array. Fixes: c8846e1015022 ("mt76: add driver for MT7603E and MT7628/7688") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-12-19mt76: mt7603: improve reliability of tx powersave filteringFelix Fietkau1-2/+3
Leave more time to abort transmissions (which could happen at low CCK rates) Only warn if the last filter command is stuck Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-12-19mt76: mt7603: introduce SAR supportLorenzo Bianconi2-8/+27
Add SAR spec support to mt7603 driver to allow configuring SAR power limitations on the frequency ranges from the userland. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-12-19mt76: do not pass the received frame with decryption errorXing Song1-0/+4
MAC80211 doesn't care any decryption error in 802.3 path, so received frame will be dropped if HW tell us that the cipher configuration is not matched as well as the header has been translated to 802.3. This case only appears when IEEE80211_FCTL_PROTECTED is 0 and cipher suit is not none in the corresponding HW entry. The received frame is only reported to monitor interface if HW decryption block tell us there is ICV error or CCMP/BIP/WPI MIC error. Note in this case the reported frame is decrypted 802.11 frame and the payload may be malformed due to mismatched key. Signed-off-by: Xing Song <xing.song@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-20mt76: remove mt76_wcid pointer from mt76_tx_status_check signatureLorenzo Bianconi1-2/+2
Remove mt76_wcid pointer from mt76_tx_status_check signature since it is always set to NULL Tested-by: mrkiko.rs@gmail.com Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-20mt76: introduce packet_id idrLorenzo Bianconi1-0/+3
Introduce per-wcid idr to manage packet id for txs. This allow fast idr lookup and skb queueing at the same time. Tested-by: mrkiko.rs@gmail.com Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-10-20mt76: disable BH around napi_schedule() callsFelix Fietkau1-2/+5
napi_schedule() can call __raise_softirq_irqoff(), which can perform softirq handling, so it must not be called in a pure process context with BH enabled. Signed-off-by: Felix Fietkau <nbd@nbd.name>
generated by cgit v1.2.3 (git 2.25.1) at 2025-09-02 15:14:50 +0000