summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/mediatek/mt76/mt7996/regs.h
AgeCommit message (Collapse)AuthorFilesLines
2023-12-11wifi: mt76: mt7996: set DMA mask to 36 bits for boards with more than 4GB of RAMSujuan Chen1-2/+3
Introduce the capability to run mt7996 driver on boards with more than 4GB of memory. Co-developed-by: Rex Lu <rex.lu@mediatek.com> Signed-off-by: Rex Lu <rex.lu@mediatek.com> Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-07wifi: mt76: mt7996: rework register offsets for mt7992StanleyYP Wang1-23/+53
Add mt7992_offs to differentiate registers that share the same definitions with mt7996 chipsets but have differnet offsets. This is a preliminary patch for mt7992 chipsets support. Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-07wifi: mt76: mt7996: add DMA support for mt7992Benjamin Lin1-2/+2
Add DMA TX/RX queues and RRO init flow for mt7992 chipsets. This is a preliminary patch for mt7992 chipsets support. Co-developed-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com> Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com> Co-developed-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Benjamin Lin <benjamin-jw.lin@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-07wifi: mt76: connac: add firmware support for mt7992StanleyYP Wang1-0/+7
Support firmware download and enable related AFE PLL for mt7992 chipsets. This is a preliminary patch for mt7992 chipsets support. Co-developed-by: Benjamin Lin <benjamin-jw.lin@mediatek.com> Signed-off-by: Benjamin Lin <benjamin-jw.lin@mediatek.com> Co-developed-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-07wifi: mt76: mt7996: introduce mt7996_band_valid()Shayne Chen1-0/+3
Replace dbdc_support and tbtc_support with mt7996_band_valid() to support mt7996 variants with band0/band2 dual-band support. This changes reduces ambiguity when checking supported bands on different variants or new chipsets, as well as during the init configurations on DMA TX/RX queues or irq masks. Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-07wifi: mt76: mt7996: adjust WFDMA settings to improve performancePeter Chiu1-0/+9
Refactor and update dma prefetch parts and also split band 1 traffic to PCIe 1 to enhance throughput. Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-07wifi: mt76: mt7996: add wed rro delete session garbage collectorLorenzo Bianconi1-0/+6
Introduce the capability to clear WED rro session configured in the hw according to the event reported by the MCU firmware Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com> Co-developed-by: Bo Jiao <Bo.Jiao@mediatek.com> Signed-off-by: Bo Jiao <Bo.Jiao@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-07wifi: mt76: mt7996: add wed reset supportLorenzo Bianconi1-1/+6
Introduce the capability to reset mt7996 chipset if requested by wed driver. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-07wifi: mt76: mt7996: add wed rx supportBo Jiao1-4/+58
Similar to MT7915, enable Wireless Ethernet Ditpatcher for MT7996 to offload traffic received from the WLAN nic and transmitted on the LAN one Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by: Bo Jiao <Bo.Jiao@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-07wifi: mt76: mt7996: add wed tx supportSujuan Chen1-0/+5
Similar to MT7915, enable Wireless Ethernet Ditpatcher for MT7996 to offload traffic received from the LAN nic and transmitted on the WLAN one Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-30wifi: mt76: mt7996: enable PPDU-TxS to hostYi-Chia Hsieh1-0/+7
Enable PPDU TxS by default. This makes the driver able to get Tx rate information from TxS. The driver will also refresh BA session timer on receive of PPDU TxS when WED is on. Signed-off-by: Yi-Chia Hsieh <yi-chia.hsieh@mediatek.com> Signed-off-by: Money Wang <Money.Wang@mediatek.com> Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Evelyn Tsai <evelyn.tsai@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-30wifi: mt76: mt7996: support per-band LED controlJen-Hao Cheng1-0/+1
Extend settings of LED registers to support per-band configuration. Signed-off-by: Jen-Hao Cheng <jen-hao.cheng@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-07-25wifi: mt76: mt7996: enable BSS_CHANGED_MU_GROUPS supportRyder Lee1-7/+14
The Group ID Management frame is an Action frame of category VHT. It is transmitted by the AP to assign or change the user position of a STA for one or more group IDs. Also, sniffer can use a given group id to monitor STA that belongs to that group. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-19wifi: mt76: mt7996: enable BSS_CHANGED_BASIC_RATES supportRyder Lee1-0/+7
The connac3 removes fixed rate fields to reduce txd size and introduces global rate tables (64 entries) for rate setting. Driver needs to fill the corresponding idx in MT_TXD6_TX_RATE while tx, and push mt76_rate into predifined table at bootup stage so that mvif->basic_rates_idx can immediately switch out once setting changes. spe_idx is also needed for fixed rate frames, and will be updated by future patches. Note that all table entries are shared across driver and firmware (i.e.TxBF), hence adding MT7996_BASIC_RATES_TBL to reflect mapping status. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-17wifi: mt76: mt7996: enable coredump supportRyder Lee1-0/+18
Host triggered and catastrophic event triggered firmware core dumping for basic firmware issues triage, including state reporting, function calltrace and MCU memory dump. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-17wifi: mt76: mt7996: add full system reset knobs into debugfsRyder Lee1-0/+13
Add testing points into debugfs to trigger firmware assert and enable full system recovery. Also rename knob "fw_ser" to a clear-cut name "sys_recovery". Co-developed-by: Bo Jiao <Bo.Jiao@mediatek.com> Signed-off-by: Bo Jiao <Bo.Jiao@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-17wifi: mt76: mt7996: enable full system reset supportBo Jiao1-2/+11
Add mt7996_reset() and refactor mt7996_mac_reset_work() to support full system recovery. Signed-off-by: Bo Jiao <Bo.Jiao@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-02-03wifi: mt76: mt7996: update register for CFEND_RATEShayne Chen1-7/+8
In newer chipsets, CFEND_RATE setting has been moved to different hw module. Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices") Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-12-09wifi: mt76: mt7996: drop always true condition of __mt7996_reg_addr()Ryder Lee1-1/+0
addr <= MT_CBTOP2_PHY_END(0xffffffff) is always true (<= u32max), so drop it. Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices") Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-12-01wifi: mt76: mt7996: enable ack signal supportRyder Lee1-4/+13
This reports signal strength of ACK packets from the peer as measured at each interface. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-12-01wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devicesShayne Chen1-0/+533
The driver first supports Filogic 680 PCI device, which is a Wi-Fi 7 chipset supporting concurrent tri-band operation at 6 GHz, 5 GHz, and 2.4 GHz with 4x4 antennas on each band. Currently, mt7996 only supports tri-band HE or older mode. EHT mode and more variants of Filogic 680 support will be introduced in further patches. Reviewed-by: Ryder Lee <ryder.lee@mediatek.com> Co-developed-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Co-developed-by: Bo Jiao <Bo.Jiao@mediatek.com> Signed-off-by: Bo Jiao <Bo.Jiao@mediatek.com> Co-developed-by: Howard Hsu <howard-yh.hsu@mediatek.com> Signed-off-by: Howard Hsu <howard-yh.hsu@mediatek.com> Co-developed-by: MeiChia Chiu <meichia.chiu@mediatek.com> Signed-off-by: MeiChia Chiu <meichia.chiu@mediatek.com> Co-developed-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com> Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com> Co-developed-by: Money Wang <Money.Wang@mediatek.com> Signed-off-by: Money Wang <Money.Wang@mediatek.com> Co-developed-by: Evelyn Tsai <evelyn.tsai@mediatek.com> Signed-off-by: Evelyn Tsai <evelyn.tsai@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
generated by cgit v1.2.3 (git 2.25.1) at 2025-09-02 12:40:10 +0000