Age | Commit message (Collapse) | Author | Files | Lines |
|
[ Upstream commit 2707ff4dd7b1479dbd44ebb3c74788084cc95245 ]
The value of station mode is always 0.
Fixed: 00b2e16e0063 ("mt76: mt7915: add TxBF capabilities")
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ec8f1a90d006f7cedcf86ef19fd034a406a213d6 ]
Rely on the txs fixed-rate bit instead of info->control.rates
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8d3cdc1bbb1d355f0ebef973175ae5fd74286feb ]
Fix theoretical NULL pointer dereference in mt7615_tx_prepare_skb and
mt7663_usb_sdio_tx_prepare_skb routines. This issue has been identified
by code analysis.
Fixes: 6aa4ed7927f11 ("mt76: mt7615: implement DMA support for MT7622")
Fixes: 4bb586bc33b98 ("mt76: mt7663u: sync probe sampling with rate configuration")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d7400a2f3e295b8cee692c7a66e10f60015a3c37 ]
Even if this is not a real issue since mt76_tx is never run with wcid set
to NULL, fix a theoretical NULL pointer dereference in mt76_tx routine
Fixes: db9f11d3433f7 ("mt76: store wcid tx rate info in one u32 reduce locking")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 5c7d374444afdeb9dd534a37c4f6c13af032da0c ]
Fixes hardware wakeup issues
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a226ccd04c479ccd23d6927c64bad1b441707f70 ]
Fix incorrect txpower init value for TSSI off chips which causes
too small txpower.
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4b36cc6b390f18dbc59a45fb4141f90d7dfe2b23 ]
When operating two VAP on a MT7610 with encryption (PSK2, SAE, OWE),
only the first one to be created will transmit properly encrypteded
frames.
All subsequently created VAPs will sent out frames with the payload left
unencrypted, breaking multicast traffic (ICMP6 NDP) and potentially
disclosing information to a third party.
Disable GTK offloading and encrypt these frames in software to
circumvent this issue. THis only seems to be necessary on MT7610 chips,
as MT7612 is not affected from our testing.
Signed-off-by: David Bauer <mail@david-bauer.net>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 858ebf446bee7d5077bd99488aae617908c3f4fe ]
EEPROM blobs for MT7613BE radios start with (little endian) 0x7663,
which is also the PCI device ID for this device. The EEPROM is required
for the radio to work at useful power levels, otherwise only the lowest
power level is available.
Suggested-by: Georgi Vlaev <georgi.vlaev@konsulko.com>
Tested-by: Stijn Segers <foss@volatilesystems.org>
Signed-off-by: Sander Vanheule <sander@svanheule.net>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8ab31da7b89f71c4c2defcca989fab7b42f87d71 ]
mt7615_tx_token_put() should get call before mt76_free_pending_txwi().
Fixes: a6275e934605 ("mt76: mt7615: reset token when mac_reset happens")
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 45247a85614b49b07b9dc59a4e6783b17e766ff2 ]
Use the additional memory barrier to ensure the skb list up-to-date
between the skb producer and consumer to avoid the invalid skb content
written into sdio controller and then cause device hang due to mcu assert
caught by WR_TIMEOUT_INT.
Fixes: 1522ff731f84 ("mt76: mt7663s: introduce sdio tx aggregation")
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 455ae5aabcc72fed7e5c803d59d122415500dc08 ]
Each packet should be padded with the additional zero to become 4-bytes
alignment in sdio tx aggregation.
Fixes: 1522ff731f84 ("mt76: mt7663s: introduce sdio tx aggregation")
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2b35050a321865859fd2f12a3c18ed7be27858c9 ]
In order to properly report MIB counters to mac80211, resets stats in
mt7915_get_stats routine() and hold mt76 mutex accessing MIB counters.
Sum up MIB counters in mt7915_mac_update_mib_stats routine.
Fixes: e57b7901469f ("mt76: add mac80211 driver for MT7915 PCIe-based chipsets")
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2eb6f6c437745bce46bd7a8f3a22a732d5b9becb ]
In order to properly report MIB counters to mac80211, resets stats in
mt7615_get_stats routine and hold mt76 mutex accessing MIB counters.
Sum up MIB counters in mt7615_mac_update_mib_stats routine.
Fixes: c388d8584bc83 ("mt76: mt7615: add a get_stats() callback")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9fb9d755fae20b5ad62ef8b4e9289e5baea2c6fc ]
Similar to mt7921, fix 802.11 aggr len debugfs reporting for mt7915 driver.
Fixes: e57b7901469fc ("mt76: add mac80211 driver for MT7915 PCIe-based chipsets")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7dcf3c04f0aca746517a77433b33d40868ca4749 ]
The first pointer in the txp needs to be unmapped as well, otherwise it will
leak DMA mapping entries
Reported-by: Ben Greear <greearb@candelatech.com>
Fixes: 27d5c528a7ca ("mt76: fix double DMA unmap of the first buffer on 7615/7915")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ebee7885bb12a8fe2c2f9bac87dbd87a05b645f9 ]
The first pointer in the txp needs to be unmapped as well, otherwise it will
leak DMA mapping entries
Fixes: 27d5c528a7ca ("mt76: fix double DMA unmap of the first buffer on 7615/7915")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 87fce88658ba047ae62e83497d3f3c5dc22fa6f9 ]
Currently the expression ~nic_conf1 is always true because nic_conf1
is a u16 and according to 6.5.3.3 of the C standard the ~ operator
promotes the u16 to an integer before flipping all the bits. Thus
the top 16 bits of the integer result are all set so the expression
is always true. If the intention was to flip all the bits of nic_conf1
then casting the integer result back to a u16 is a suitabel fix.
Interestingly static analyzers seem to thing a bitwise ! should be
used instead of ~ for this scenario, so I think the original intent
of the expression may need some extra consideration.
Addresses-Coverity: ("Logical vs. bitwise operator")
Fixes: c869f77d6abb ("add mt7601u driver")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Jakub Kicinski <kubakici@wp.pl>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210225183241.1002129-1-colin.king@canonical.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit b4403cee6400c5f679e9c4a82b91d61aa961eccf upstream.
With buf uninitialized in mt76_dma_tx_queue_skb_raw, its field skip_unmap
could potentially inherit a non-zero value from stack garbage.
If this happens, it will cause DMA mappings for MCU command frames to not be
unmapped after completion
Fixes: 27d5c528a7ca ("mt76: fix double DMA unmap of the first buffer on 7615/7915")
Cc: stable@vger.kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 06991d1f73a9bdbc5f234ee96737b9102705b89c upstream.
We should use ieee80211_free_txskb() to report skb status avoid wrong
aql accounting after reset.
Cc: stable@vger.kernel.org
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit ae064fc0e32a4d28389086d9f4b260a0c157cfee ]
When running out of room in the tx queue after calling drv->tx_prepare_skb,
the buffer list will already have been modified on MT7615 and newer drivers.
This can leak a DMA mapping and will show up as swiotlb allocation failures
on x86.
Fix this by moving the queue length check further up. This is less accurate,
since it can overestimate the needed room in the queue on MT7615 and newer,
but the difference is small enough to not matter in practice.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210216135119.23809-1-nbd@nbd.name
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit d0bd52c591a1070c54dc428e926660eb4f981099 upstream.
Commit b102f0c522cf6 ("mt76: fix array overflow on receiving too many
fragments for a packet") fixes a possible OOB access but it introduces a
memory leak since the pending frame is not released to page_frag_cache
if the frag array of skb_shared_info is full. Commit 93a1d4791c10
("mt76: dma: fix a possible memory leak in mt76_add_fragment()") fixes
the issue but does not free the truncated skb that is forwarded to
mac80211 layer. Fix the leftover issue discarding even truncated skbs.
Fixes: 93a1d4791c10 ("mt76: dma: fix a possible memory leak in mt76_add_fragment()")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/a03166fcc8214644333c68674a781836e0f57576.1612697217.git.lorenzo@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit a6275e934605646ef81b02d8d1164f21343149c9 ]
Reset token in mt7615_mac_reset_work() to avoid possible leakege.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0211c282bc8aaa15343aadbc6e23043e7057f77d ]
Similar to mt7915 driver, fix mt7615 radar mcu command endianness
Fixes: 2ce73efe0f8e5 ("mt76: mt7615: initialize radar specs from host driver")
Fixes: 70911d9638069 ("mt76: mt7615: add radar pattern test knob to debugfs")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit cee236e1489ecca9d23d6ce6f60d126cc651a5ba ]
Multiple MCU messages were using u16/u32 fields without endian annotations
or conversions
Fixes: e57b7901469f ("mt76: add mac80211 driver for MT7915 PCIe-based chipsets")
Fixes: 5517f78b0063 ("mt76: mt7915: enable firmware module debug support")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 93a1d4791c10d443bc67044def7efee2991d48b7 ]
Fix a memory leak in mt76_add_fragment routine returning the buffer
to the page_frag_cache when we receive a new fragment and the
skb_shared_info frag array is full.
Fixes: b102f0c522cf6 ("mt76: fix array overflow on receiving too many fragments for a packet")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Acked-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/4f9dd73407da88b2a552517ce8db242d86bf4d5c.1611616130.git.lorenzo@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit d24c790577ef01bfa01da2b131313a38c843a634 upstream.
Fix the following crash due to erroneous page refcounting:
[ 32.445919] BUG: Bad page state in process swapper/1 pfn:11f65a
[ 32.447409] page:00000000938f0632 refcount:0 mapcount:-128 mapping:0000000000000000 index:0x0 pfn:0x11f65a
[ 32.449605] flags: 0x8000000000000000()
[ 32.450421] raw: 8000000000000000 ffffffff825b0148 ffffea00045ae988 0000000000000000
[ 32.451795] raw: 0000000000000000 0000000000000001 00000000ffffff7f 0000000000000000
[ 32.452999] page dumped because: nonzero mapcount
[ 32.453888] Modules linked in:
[ 32.454492] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.11.0-rc2+ #1976
[ 32.455695] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-1.fc33 04/01/2014
[ 32.457157] Call Trace:
[ 32.457636] <IRQ>
[ 32.457993] dump_stack+0x77/0x97
[ 32.458576] bad_page.cold+0x65/0x96
[ 32.459198] get_page_from_freelist+0x46a/0x11f0
[ 32.460008] __alloc_pages_nodemask+0x10a/0x2b0
[ 32.460794] mt7601u_rx_tasklet+0x651/0x720
[ 32.461505] tasklet_action_common.constprop.0+0x6b/0xd0
[ 32.462343] __do_softirq+0x152/0x46c
[ 32.462928] asm_call_irq_on_stack+0x12/0x20
[ 32.463610] </IRQ>
[ 32.463953] do_softirq_own_stack+0x5b/0x70
[ 32.464582] irq_exit_rcu+0x9f/0xe0
[ 32.465028] common_interrupt+0xae/0x1a0
[ 32.465536] asm_common_interrupt+0x1e/0x40
[ 32.466071] RIP: 0010:default_idle+0x18/0x20
[ 32.468981] RSP: 0018:ffffc90000077f00 EFLAGS: 00000246
[ 32.469648] RAX: 0000000000000000 RBX: 0000000000000001 RCX: 0000000000000000
[ 32.470550] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffff81aac3dd
[ 32.471463] RBP: ffff88810022ab00 R08: 0000000000000001 R09: 0000000000000001
[ 32.472335] R10: 0000000000000046 R11: 0000000000005aa0 R12: 0000000000000000
[ 32.473235] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
[ 32.474139] ? default_idle_call+0x4d/0x200
[ 32.474681] default_idle_call+0x74/0x200
[ 32.475192] do_idle+0x1d5/0x250
[ 32.475612] cpu_startup_entry+0x19/0x20
[ 32.476114] secondary_startup_64_no_verify+0xb0/0xbb
[ 32.476765] Disabling lock debugging due to kernel taint
Fixes: c869f77d6abb ("add mt7601u driver")
Co-developed-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Acked-by: Jakub Kicinski <kubakici@wp.pl>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/62b2380c8c2091834cfad05e1059b55f945bd114.1610643952.git.lorenzo@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 952de419b6179ad1424f512d52ec7122662fdf63 upstream.
Similar to mt7601u driver, fix erroneous rx page refcounting
Fixes: a66cbdd6573d ("mt76: mt7615: introduce mt7663s support")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/dca19c9d445156201bc41f7cbb6e894bbc9a678c.1610644945.git.lorenzo@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0acb20a5438c36e0cf2b8bf255f314b59fcca6ef upstream.
The following crash log can occur unplugging the usb dongle since,
after the urb poison in mt7601u_free_tx_queue(), usb_submit_urb() will
always fail resulting in a skb kfree while the skb has been already
queued.
Fix the issue enqueuing the skb only if usb_submit_urb() succeed.
Hardware name: Hewlett-Packard 500-539ng/2B2C, BIOS 80.06 04/01/2015
Workqueue: usb_hub_wq hub_event
RIP: 0010:skb_trim+0x2c/0x30
RSP: 0000:ffffb4c88005bba8 EFLAGS: 00010206
RAX: 000000004ad483ee RBX: ffff9a236625dee0 RCX: 000000000000662f
RDX: 000000000000000c RSI: 0000000000000000 RDI: ffff9a2343179300
RBP: ffff9a2343179300 R08: 0000000000000001 R09: 0000000000000000
R10: ffff9a23748f7840 R11: 0000000000000001 R12: ffff9a236625e4d4
R13: ffff9a236625dee0 R14: 0000000000001080 R15: 0000000000000008
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fd410a34ef8 CR3: 00000001416ee001 CR4: 00000000001706f0
Call Trace:
mt7601u_tx_status+0x3e/0xa0 [mt7601u]
mt7601u_dma_cleanup+0xca/0x110 [mt7601u]
mt7601u_cleanup+0x22/0x30 [mt7601u]
mt7601u_disconnect+0x22/0x60 [mt7601u]
usb_unbind_interface+0x8a/0x270
? kernfs_find_ns+0x35/0xd0
__device_release_driver+0x17a/0x230
device_release_driver+0x24/0x30
bus_remove_device+0xdb/0x140
device_del+0x18b/0x430
? kobject_put+0x98/0x1d0
usb_disable_device+0xc6/0x1f0
usb_disconnect.cold+0x7e/0x20a
hub_event+0xbf3/0x1870
process_one_work+0x1b6/0x350
worker_thread+0x53/0x3e0
? process_one_work+0x350/0x350
kthread+0x11b/0x140
? __kthread_bind_mask+0x60/0x60
ret_from_fork+0x22/0x30
Fixes: 23377c200b2eb ("mt7601u: fix possible memory leak when the device is disconnected")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Acked-by: Jakub Kicinski <kubakici@wp.pl>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/3b85219f669a63a8ced1f43686de05915a580489.1610919247.git.lorenzo@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ed89b89330b521f20682ead6bf93e1014b21a200 upstream.
It was accidentally dropped while adding multiple wiphy support
Fixes fast-rx support and avoids handling reordering in both mac80211
and the driver
Cc: stable@vger.kernel.org
Fixes: c89d36254155 ("mt76: add function for allocating an extra wiphy")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 930e0eaddf810cfa90e114a0df02f48539e1346f ]
Fix Tx-Rx MIC overwrite during TKIP hw key configuration
Fixes: 01cfc1b45421 ("mt76: mt7615: add BIP_CMAC_128 cipher support")
Tested-by: YN Chen <yn.chen@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit bc348defcc6eceeb4f7784bf9a263ddb72fd3fb4 ]
Run mt76_free_device instead of ieee80211_free_hw if device probing
fails in order to remove the already allocated mt76 workqueue
Fixes: a86f1d01f5ce5 ("mt76: move mt76 workqueue in common code")
Fixes: f1d962369d568 ("mt76: mt7915: implement HE per-rate tx power support")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 5f0ce5848733b86deaba1c6d102e20479230b20a ]
Fix the following possible deadlock reported by lockdep disabling BH
running mt76_free_pending_txwi()
================================
WARNING: inconsistent lock state
5.9.0-rc6 #14 Not tainted
--------------------------------
inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage.
rmmod/1227 [HC0[0]:SC0[0]:HE1:SE1] takes:
ffff888156a83530 (&dev->lock#2){+.?.}-{2:2}, at: mt76_dma_cleanup+0x125/0x150 [mt76]
{IN-SOFTIRQ-W} state was registered at:
__lock_acquire+0x20c/0x6b0
lock_acquire+0x9d/0x220
_raw_spin_lock+0x2c/0x70
mt76_dma_tx_cleanup+0xc7/0x200 [mt76]
mt76x02_poll_tx+0x31/0xb0 [mt76x02_lib]
napi_poll+0x3a/0x100
net_rx_action+0xa8/0x200
__do_softirq+0xc4/0x430
asm_call_on_stack+0xf/0x20
do_softirq_own_stack+0x49/0x60
irq_exit_rcu+0x9a/0xd0
common_interrupt+0xa4/0x190
asm_common_interrupt+0x1e/0x40
irq event stamp: 9915
hardirqs last enabled at (9915): [<ffffffff8124e286>] __free_pages_ok+0x336/0x3b0
hardirqs last disabled at (9914): [<ffffffff8124e24e>] __free_pages_ok+0x2fe/0x3b0
softirqs last enabled at (9912): [<ffffffffa03aa672>] mt76_dma_rx_cleanup+0xa2/0x120 [mt76]
softirqs last disabled at (9846): [<ffffffffa03aa5ea>] mt76_dma_rx_cleanup+0x1a/0x120 [mt76]
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&dev->lock#2);
<Interrupt>
lock(&dev->lock#2);
*** DEADLOCK ***
1 lock held by rmmod/1227:
#0: ffff88815b5eb240 (&dev->mutex){....}-{3:3}, at: driver_detach+0xb5/0x110
stack backtrace:
CPU: 1 PID: 1227 Comm: rmmod Kdump: loaded Not tainted 5.9.0-rc6-wdn-src+ #14
Hardware name: Dell Inc. Studio XPS 1340/0K183D, BIOS A11 09/08/2009
Call Trace:
dump_stack+0x77/0xa0
mark_lock_irq.cold+0x15/0x39
mark_lock+0x1fc/0x500
mark_usage+0xc7/0x140
__lock_acquire+0x20c/0x6b0
? find_held_lock+0x2b/0x80
? sched_clock_cpu+0xc/0xb0
lock_acquire+0x9d/0x220
? mt76_dma_cleanup+0x125/0x150 [mt76]
_raw_spin_lock+0x2c/0x70
? mt76_dma_cleanup+0x125/0x150 [mt76]
mt76_dma_cleanup+0x125/0x150 [mt76]
mt76x2_cleanup+0x5a/0x70 [mt76x2e]
mt76x2e_remove+0x18/0x30 [mt76x2e]
pci_device_remove+0x36/0xa0
__device_release_driver+0x16c/0x220
driver_detach+0xcf/0x110
bus_remove_driver+0x56/0xca
pci_unregister_driver+0x36/0x80
__do_sys_delete_module.constprop.0+0x127/0x200
? syscall_enter_from_user_mode+0x1d/0x50
? trace_hardirqs_on+0x1c/0xe0
do_syscall_64+0x33/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7ff0da54e36b
Code: 73 01 c3 48 8b 0d 2d 0b 0c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa b8 b0 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d fd 0a 0c 00 f7 d8 64 89 01 48
Fixes: dd57a95cfddc ("mt76: move txwi handling code to dma.c, since it is mmio specific")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f9df085ce1be5c599e4df590ff7ba853786c6d95 ]
If THIS_MODULE is not set, the module would be removed while debugfs is
being used.
It eventually makes kernel panic.
Fixes: e57b7901469f ("mt76: add mac80211 driver for MT7915 PCIe-based chipsets")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 5efbe3b1b8992d5f837388091920945c23212159 ]
If THIS_MODULE is not set, the module would be removed while debugfs is
being used.
It eventually makes kernel panic.
Fixes: ec9742a8f38e ("mt76: mt7915: add .sta_add_debugfs support")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1c79a190e94325e01811f653f770a34e816fdd8f ]
Properly account current consumed ple quota in mt7663s_tx_pick_quota
routine and avoid possible underflow.
Fixes: 6ef2d665f64d ("mt76: mt7663s: split mt7663s_tx_update_sched in mt7663s_tx_{pick,update}_quota")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
Currently 'while (q->queued > 0)' loop was removed from mt76u_stop_tx()
code. This causes crash on device removal as we try to cleanup empty
queue:
[ 96.495571] kernel BUG at include/linux/skbuff.h:2297!
[ 96.498983] invalid opcode: 0000 [#1] SMP PTI
[ 96.501162] CPU: 3 PID: 27 Comm: kworker/3:0 Not tainted 5.10.0-rc5+ #11
[ 96.502754] Hardware name: LENOVO 20DGS08H00/20DGS08H00, BIOS J5ET48WW (1.19 ) 08/27/2015
[ 96.504378] Workqueue: usb_hub_wq hub_event
[ 96.505983] RIP: 0010:skb_pull+0x2d/0x30
[ 96.507576] Code: 00 00 8b 47 70 39 c6 77 1e 29 f0 89 47 70 3b 47 74 72 17 48 8b 87 c8 00 00 00 89 f6 48 01 f0 48 89 87 c8 00 00 00 c3 31 c0 c3 <0f> 0b 90 0f 1f 44 00 00 53 48 89 fb 48 8b bf c8 00 00 00 8b 43 70
[ 96.509296] RSP: 0018:ffffb11b801639b8 EFLAGS: 00010287
[ 96.511038] RAX: 000000001c6939ed RBX: ffffb11b801639f8 RCX: 0000000000000000
[ 96.512964] RDX: ffffb11b801639f8 RSI: 0000000000000018 RDI: ffff90c64e4fb800
[ 96.514710] RBP: ffff90c654551ee0 R08: ffff90c652bce7a8 R09: ffffb11b80163728
[ 96.516450] R10: 0000000000000001 R11: 0000000000000001 R12: ffff90c64e4fb800
[ 96.519749] R13: 0000000000000010 R14: 0000000000000020 R15: ffff90c64e352ce8
[ 96.523455] FS: 0000000000000000(0000) GS:ffff90c96eec0000(0000) knlGS:0000000000000000
[ 96.527171] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 96.530900] CR2: 0000242556f18288 CR3: 0000000146a10002 CR4: 00000000003706e0
[ 96.534678] Call Trace:
[ 96.538418] mt76x02u_tx_complete_skb+0x1f/0x50 [mt76x02_usb]
[ 96.542231] mt76_queue_tx_complete+0x23/0x50 [mt76]
[ 96.546028] mt76u_stop_tx.cold+0x71/0xa2 [mt76_usb]
[ 96.549797] mt76x0u_stop+0x2f/0x90 [mt76x0u]
[ 96.553638] drv_stop+0x33/0xd0 [mac80211]
[ 96.557449] ieee80211_do_stop+0x558/0x860 [mac80211]
[ 96.561262] ? dev_deactivate_many+0x298/0x2d0
[ 96.565101] ieee80211_stop+0x16/0x20 [mac80211]
Fix that by adding while loop again. We need loop, not just single
check, to clean all pending entries.
Additionally move mt76_worker_disable/enable after !mt76_has_tx_pending()
as we want to tx_worker to run to process tx queues, while we wait for
exactly that.
I was a bit worried about accessing q->queued without lock, but
mt76_worker_disable() -> kthread_park() should assure this value will
be seen updated on other cpus.
Fixes: fe5b5ab52e9d ("mt76: unify queue tx cleanup code")
Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl>
Acked-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201126125520.72912-1-stf_xl@wp.pl
|
|
Rejecting non-native endian BTF overlapped with the addition
of support for it.
The rest were more simple overlapping changes, except the
renesas ravb binding update, which had to follow a file
move as well as a YAML conversion.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next
Kalle Valo says:
====================
wireless-drivers-next patches for v5.10
Second set of patches for v5.10. Biggest change here is wcn3680
support to wcn36xx driver, otherwise smaller features. And naturally
the usual fixes and cleanups.
Major changes:
brcmfmac
* support 4-way handshake offloading for WPA/WPA2-PSK in AP mode
* support SAE authentication offload in AP mode
mt76
* mt7663 runtime power management improvements
* mt7915 A-MSDU offload
wcn36xx
* add support wcn3680 Wi-Fi 5 devices
ath11k
* spectral scan support for ipq6018
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Remove A-MSDU max_tx_fragments constraint for sdio since the check is
already performed in mt7663s_tx_run_queue routine
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code.
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Add a missing offchannel condition for channel switch reason, which
bypasses DPD calibration to reduce scanning time.
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Convert cpu_to_le16(le16_to_cpu(E1) + E2) to use le16_add_cpu().
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Fixes variable types in mt76x02_dfs_create_sequence and
mt76x02_dfs_add_event_to_sequence
Signed-off-by: Ye Bin <yebin10@huawei.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Release mcu message memory in case of failure in mt7915_mcu_add_beacon
routine
Fixes: e57b7901469fc ("mt76: add mac80211 driver for MT7915 PCIe-based chipsets")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Taking the same approach as initvals_phy.h.
Fixes the following W=1 kernel build warning(s):
drivers/net/wireless/mediatek/mt76/mt76x0/initvals.h:218:35: warning: ‘mt76x0_dcoc_tab’ defined but not used [-Wunused-const-variable=]
218 | static const struct mt76_reg_pair mt76x0_dcoc_tab[] = {
| ^~~~~~~~~~~~~~~
drivers/net/wireless/mediatek/mt76/mt76x0/initvals.h:86:35: warning: ‘mt76x0_bbp_init_tab’ defined but not used [-Wunused-const-variable=]
86 | static const struct mt76_reg_pair mt76x0_bbp_init_tab[] = {
| ^~~~~~~~~~~~~~~~~~~
drivers/net/wireless/mediatek/mt76/mt76x0/initvals.h:48:35: warning: ‘mt76x0_mac_reg_table’ defined but not used [-Wunused-const-variable=]
48 | static const struct mt76_reg_pair mt76x0_mac_reg_table[] = {
| ^~~~~~~~~~~~~~~~~~~~
drivers/net/wireless/mediatek/mt76/mt76x0/initvals.h:14:35: warning: ‘common_mac_reg_table’ defined but not used [-Wunused-const-variable=]
14 | static const struct mt76_reg_pair common_mac_reg_table[] = {
| ^~~~~~~~~~~~~~~~~~~~
Cc: Felix Fietkau <nbd@nbd.name>
Cc: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
Cc: Ryder Lee <ryder.lee@mediatek.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Stanislaw Gruszka <stf_xl@wp.pl>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: linux-mediatek@lists.infradead.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Replace the existing /* fall through */ comments and its variants with
the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary
fall-through markings when it is the case.
[1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Unlock dfs channels for mt7615 devices since the driver supports
radar detection. Dfs pattern detector has been tested successfully by
mt7615 users.
Do not unlock DFS frequencies for mt7663 devices since it has not been
tested yet.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
In order to avoid using stale isr values, check return value from
sdio_readsb() in mt7663s_rx_work()
Tested-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Introduce sdio tx aggregation to reduce bus transaction ands improve tx
throughput. For the moment the skb are copied in a dedicated buffer
since mmc APIs do not support sg table for zero-copy.
Since skb data are already copied in xmit_buff[], avoid linearization in
ma80211 layer. Relying on tx aggregation, we improve tx tpt of ~65%.
Tested-by: Sean Wang <sean.wang@mediatek.com>
Co-developed-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Look just at reported quota since the hw sporadically reports mcu tx
quota without setting WHIER_TX_DONE_INT_EN bit
Tested-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|