summaryrefslogtreecommitdiff
path: root/drivers/net/wireless
AgeCommit message (Collapse)AuthorFilesLines
2021-05-14mt76: mt7915: fix aggr len debugfs nodeLorenzo Bianconi1-1/+1
[ Upstream commit 9fb9d755fae20b5ad62ef8b4e9289e5baea2c6fc ] Similar to mt7921, fix 802.11 aggr len debugfs reporting for mt7915 driver. Fixes: e57b7901469fc ("mt76: add mac80211 driver for MT7915 PCIe-based chipsets") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-14mt76: mt7915: fix tx skb dma unmapFelix Fietkau1-1/+1
[ Upstream commit 7dcf3c04f0aca746517a77433b33d40868ca4749 ] The first pointer in the txp needs to be unmapped as well, otherwise it will leak DMA mapping entries Reported-by: Ben Greear <greearb@candelatech.com> Fixes: 27d5c528a7ca ("mt76: fix double DMA unmap of the first buffer on 7615/7915") Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-14mt76: mt7615: fix tx skb dma unmapFelix Fietkau1-1/+1
[ Upstream commit ebee7885bb12a8fe2c2f9bac87dbd87a05b645f9 ] The first pointer in the txp needs to be unmapped as well, otherwise it will leak DMA mapping entries Fixes: 27d5c528a7ca ("mt76: fix double DMA unmap of the first buffer on 7615/7915") Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-14mt7601u: fix always true expressionColin Ian King1-1/+1
[ Upstream commit 87fce88658ba047ae62e83497d3f3c5dc22fa6f9 ] Currently the expression ~nic_conf1 is always true because nic_conf1 is a u16 and according to 6.5.3.3 of the C standard the ~ operator promotes the u16 to an integer before flipping all the bits. Thus the top 16 bits of the integer result are all set so the expression is always true. If the intention was to flip all the bits of nic_conf1 then casting the integer result back to a u16 is a suitabel fix. Interestingly static analyzers seem to thing a bitwise ! should be used instead of ~ for this scenario, so I think the original intent of the expression may need some extra consideration. Addresses-Coverity: ("Logical vs. bitwise operator") Fixes: c869f77d6abb ("add mt7601u driver") Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Jakub Kicinski <kubakici@wp.pl> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210225183241.1002129-1-colin.king@canonical.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-14rtw88: Fix an error code in rtw_debugfs_set_rsvd_page()Dan Carpenter1-1/+1
[ Upstream commit c9eaee0c2ec6b1002044fb698cdfb5d9ef4ed28c ] The sscanf() function returns the number of matches (0 or 1 in this case). It doesn't return error codes. We should return -EINVAL if the string is invalid Fixes: c376c1fc87b7 ("rtw88: add h2c command in debugfs") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/YE8nmatMDBDDWkjq@mwanda Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-14wilc1000: write value to WILC_INTR2_ENABLE registerMarcus Folkesson1-1/+1
[ Upstream commit e21b6e5a54628cd3935f200049d4430c25c54e03 ] Write the value instead of reading it twice. Fixes: c5c77ba18ea6 ("staging: wilc1000: Add SDIO/SPI 802.11 driver") Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210224163706.519658-1-marcus.folkesson@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-14mt76: fix potential DMA mapping leakFelix Fietkau1-1/+1
commit b4403cee6400c5f679e9c4a82b91d61aa961eccf upstream. With buf uninitialized in mt76_dma_tx_queue_skb_raw, its field skip_unmap could potentially inherit a non-zero value from stack garbage. If this happens, it will cause DMA mappings for MCU command frames to not be unmapped after completion Fixes: 27d5c528a7ca ("mt76: fix double DMA unmap of the first buffer on 7615/7915") Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-14rtw88: Fix array overrun in rtw_get_tx_power_params()Ping-Ke Shih1-2/+3
commit 2ff25985ea9ccc6c9af2c77b0b49045adcc62e0e upstream. Using a kernel with the Undefined Behaviour Sanity Checker (UBSAN) enabled, the following array overrun is logged: ================================================================================ UBSAN: array-index-out-of-bounds in /home/finger/wireless-drivers-next/drivers/net/wireless/realtek/rtw88/phy.c:1789:34 index 5 is out of range for type 'u8 [5]' CPU: 2 PID: 84 Comm: kworker/u16:3 Tainted: G O 5.12.0-rc5-00086-gd88bba47038e-dirty #651 Hardware name: TOSHIBA TECRA A50-A/TECRA A50-A, BIOS Version 4.50 09/29/2014 Workqueue: phy0 ieee80211_scan_work [mac80211] Call Trace: dump_stack+0x64/0x7c ubsan_epilogue+0x5/0x40 __ubsan_handle_out_of_bounds.cold+0x43/0x48 rtw_get_tx_power_params+0x83a/drivers/net/wireless/realtek/rtw88/0xad0 [rtw_core] ? rtw_pci_read16+0x20/0x20 [rtw_pci] ? check_hw_ready+0x50/0x90 [rtw_core] rtw_phy_get_tx_power_index+0x4d/0xd0 [rtw_core] rtw_phy_set_tx_power_level+0xee/0x1b0 [rtw_core] rtw_set_channel+0xab/0x110 [rtw_core] rtw_ops_config+0x87/0xc0 [rtw_core] ieee80211_hw_config+0x9d/0x130 [mac80211] ieee80211_scan_state_set_channel+0x81/0x170 [mac80211] ieee80211_scan_work+0x19f/0x2a0 [mac80211] process_one_work+0x1dd/0x3a0 worker_thread+0x49/0x330 ? rescuer_thread+0x3a0/0x3a0 kthread+0x134/0x150 ? kthread_create_worker_on_cpu+0x70/0x70 ret_from_fork+0x22/0x30 ================================================================================ The statement where an array is being overrun is shown in the following snippet: if (rate <= DESC_RATE11M) tx_power = pwr_idx_2g->cck_base[group]; else ====> tx_power = pwr_idx_2g->bw40_base[group]; The associated arrays are defined in main.h as follows: struct rtw_2g_txpwr_idx { u8 cck_base[6]; u8 bw40_base[5]; struct rtw_2g_1s_pwr_idx_diff ht_1s_diff; struct rtw_2g_ns_pwr_idx_diff ht_2s_diff; struct rtw_2g_ns_pwr_idx_diff ht_3s_diff; struct rtw_2g_ns_pwr_idx_diff ht_4s_diff; }; The problem arises because the value of group is 5 for channel 14. The trivial increase in the dimension of bw40_base fails as this struct must match the layout of efuse. The fix is to add the rate as an argument to rtw_get_channel_group() and set the group for channel 14 to 4 if rate <= DESC_RATE11M. This patch fixes commit fa6dfe6bff24 ("rtw88: resolve order of tx power setting routines") Fixes: fa6dfe6bff24 ("rtw88: resolve order of tx power setting routines") Reported-by: Богдан Пилипенко <bogdan.pylypenko107@gmail.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Cc: Stable <stable@vger.kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210401192717.28927-1-Larry.Finger@lwfinger.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-14ipw2x00: potential buffer overflow in libipw_wx_set_encodeext()Dan Carpenter1-2/+4
commit 260a9ad9446723d4063ed802989758852809714d upstream. The "ext->key_len" is a u16 that comes from the user. If it's over SCM_KEY_LEN (32) that could lead to memory corruption. Fixes: e0d369d1d969 ("[PATCH] ieee82011: Added WE-18 support to default wireless extension handler") Cc: stable@vger.kernel.org Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Stanislav Yakovlev <stas.yakovlev@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/YHaoA1i+8uT4ir4h@mwanda Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-14mt76: mt7615: use ieee80211_free_txskb() in mt7615_tx_token_put()Ryder Lee1-2/+6
commit 06991d1f73a9bdbc5f234ee96737b9102705b89c upstream. We should use ieee80211_free_txskb() to report skb status avoid wrong aql accounting after reset. Cc: stable@vger.kernel.org Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-11rsi: Use resume_noirq for SDIOMarek Vasut1-1/+1
commit c434e5e48dc4e626364491455f97e2db0aa137b1 upstream. The rsi_resume() does access the bus to enable interrupts on the RSI SDIO WiFi card, however when calling sdio_claim_host() in the resume path, it is possible the bus is already claimed and sdio_claim_host() spins indefinitelly. Enable the SDIO card interrupts in resume_noirq instead to prevent anything else from claiming the SDIO bus first. Fixes: 20db07332736 ("rsi: sdio suspend and resume support") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Amitkumar Karwar <amit.karwar@redpinesignals.com> Cc: Angus Ainslie <angus@akkea.ca> Cc: David S. Miller <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: Karun Eagalapati <karun256@gmail.com> Cc: Martin Kepplinger <martink@posteo.de> Cc: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm> Cc: Siva Rebbagondla <siva8118@gmail.com> Cc: netdev@vger.kernel.org Cc: stable@vger.kernel.org Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210327235932.175896-1-marex@denx.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-02iwlwifi: Fix softirq/hardirq disabling in iwl_pcie_gen2_enqueue_hcmd()Jiri Kosina1-3/+4
commit e7020bb068d8be50a92f48e36b236a1a1ef9282e upstream. Analogically to what we did in 2800aadc18a6 ("iwlwifi: Fix softirq/hardirq disabling in iwl_pcie_enqueue_hcmd()"), we must apply the same fix to iwl_pcie_gen2_enqueue_hcmd(), as it's being called from exactly the same contexts. Reported-by: Heiner Kallweit <hkallweit1@gmail.com Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/nycvar.YFH.7.76.2104171112390.18270@cbobk.fhfr.pm Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-21virt_wifi: Return micros for BSS TSF valuesA. Cody Schuffelen1-2/+3
[ Upstream commit b57aa17f07c9270e576ef7df09f142978b5a75f0 ] cfg80211_inform_bss expects to receive a TSF value, but is given the time since boot in nanoseconds. TSF values are expected to be at microsecond scale rather than nanosecond scale. Signed-off-by: A. Cody Schuffelen <schuffelen@google.com> Link: https://lore.kernel.org/r/20210318200419.1421034-1-schuffelen@google.com Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-04-21iwlwifi: add support for Qu with AX201 deviceMatt Chen1-0/+1
[ Upstream commit 97195d3cad852063208a1cd4f4d073459547a415 ] Add this specific Samsung AX201 sku to driver so it can be detected and initialized successfully. Signed-off-by: Matt Chen <matt.chen@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/iwlwifi.20210326125611.30b622037714.Id9fd709cf1c8261c097bbfd7453f6476077dcafc@changeid Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-04-21iwlwifi: Fix softirq/hardirq disabling in iwl_pcie_enqueue_hcmd()Jiri Kosina1-3/+4
[ Upstream commit 2800aadc18a64c96b051bcb7da8a7df7d505db3f ] It's possible for iwl_pcie_enqueue_hcmd() to be called with hard IRQs disabled (e.g. from LED core). We can't enable BHs in such a situation. Turn the unconditional BH-enable/BH-disable code into hardirq-disable/conditional-enable. This fixes the warning below. WARNING: CPU: 1 PID: 1139 at kernel/softirq.c:178 __local_bh_enable_ip+0xa5/0xf0 CPU: 1 PID: 1139 Comm: NetworkManager Not tainted 5.12.0-rc1-00004-gb4ded168af79 #7 Hardware name: LENOVO 20K5S22R00/20K5S22R00, BIOS R0IET38W (1.16 ) 05/31/2017 RIP: 0010:__local_bh_enable_ip+0xa5/0xf0 Code: f7 69 e8 ee 23 14 00 fb 66 0f 1f 44 00 00 65 8b 05 f0 f4 f7 69 85 c0 74 3f 48 83 c4 08 5b c3 65 8b 05 9b fe f7 69 85 c0 75 8e <0f> 0b eb 8a 48 89 3c 24 e8 4e 20 14 00 48 8b 3c 24 eb 91 e8 13 4e RSP: 0018:ffffafd580b13298 EFLAGS: 00010046 RAX: 0000000000000000 RBX: 0000000000000201 RCX: 0000000000000000 RDX: 0000000000000003 RSI: 0000000000000201 RDI: ffffffffc1272389 RBP: ffff96517ae4c018 R08: 0000000000000001 R09: 0000000000000000 R10: ffffafd580b13178 R11: 0000000000000001 R12: ffff96517b060000 R13: 0000000000000000 R14: ffffffff80000000 R15: 0000000000000001 FS: 00007fc604ebefc0(0000) GS:ffff965267480000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055fb3fef13b2 CR3: 0000000109112004 CR4: 00000000003706e0 Call Trace: ? _raw_spin_unlock_bh+0x1f/0x30 iwl_pcie_enqueue_hcmd+0x5d9/0xa00 [iwlwifi] iwl_trans_txq_send_hcmd+0x6c/0x430 [iwlwifi] iwl_trans_send_cmd+0x88/0x170 [iwlwifi] ? lock_acquire+0x277/0x3d0 iwl_mvm_send_cmd+0x32/0x80 [iwlmvm] iwl_mvm_led_set+0xc2/0xe0 [iwlmvm] ? led_trigger_event+0x46/0x70 led_trigger_event+0x46/0x70 ieee80211_do_open+0x5c5/0xa20 [mac80211] ieee80211_open+0x67/0x90 [mac80211] __dev_open+0xd4/0x150 __dev_change_flags+0x19e/0x1f0 dev_change_flags+0x23/0x60 do_setlink+0x30d/0x1230 ? lock_is_held_type+0xb4/0x120 ? __nla_validate_parse.part.7+0x57/0xcb0 ? __lock_acquire+0x2e1/0x1a50 __rtnl_newlink+0x560/0x910 ? __lock_acquire+0x2e1/0x1a50 ? __lock_acquire+0x2e1/0x1a50 ? lock_acquire+0x277/0x3d0 ? sock_def_readable+0x5/0x290 ? lock_is_held_type+0xb4/0x120 ? find_held_lock+0x2d/0x90 ? sock_def_readable+0xb3/0x290 ? lock_release+0x166/0x2a0 ? lock_is_held_type+0x90/0x120 rtnl_newlink+0x47/0x70 rtnetlink_rcv_msg+0x25c/0x470 ? netlink_deliver_tap+0x97/0x3e0 ? validate_linkmsg+0x350/0x350 netlink_rcv_skb+0x50/0x100 netlink_unicast+0x1b2/0x280 netlink_sendmsg+0x336/0x450 sock_sendmsg+0x5b/0x60 ____sys_sendmsg+0x1ed/0x250 ? copy_msghdr_from_user+0x5c/0x90 ___sys_sendmsg+0x88/0xd0 ? lock_is_held_type+0xb4/0x120 ? find_held_lock+0x2d/0x90 ? lock_release+0x166/0x2a0 ? __fget_files+0xfe/0x1d0 ? __sys_sendmsg+0x5e/0xa0 __sys_sendmsg+0x5e/0xa0 ? lockdep_hardirqs_on_prepare+0xd9/0x170 do_syscall_64+0x33/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7fc605c9572d Code: 28 89 54 24 1c 48 89 74 24 10 89 7c 24 08 e8 da ee ff ff 8b 54 24 1c 48 8b 74 24 10 41 89 c0 8b 7c 24 08 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 33 44 89 c7 48 89 44 24 08 e8 2e ef ff ff 48 RSP: 002b:00007fffc83789f0 EFLAGS: 00000293 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 000055ef468570c0 RCX: 00007fc605c9572d RDX: 0000000000000000 RSI: 00007fffc8378a30 RDI: 000000000000000c RBP: 0000000000000010 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000293 R12: 0000000000000000 R13: 00007fffc8378b80 R14: 00007fffc8378b7c R15: 0000000000000000 irq event stamp: 170785 hardirqs last enabled at (170783): [<ffffffff9609a8c2>] __local_bh_enable_ip+0x82/0xf0 hardirqs last disabled at (170784): [<ffffffff96a8613d>] _raw_read_lock_irqsave+0x8d/0x90 softirqs last enabled at (170782): [<ffffffffc1272389>] iwl_pcie_enqueue_hcmd+0x5d9/0xa00 [iwlwifi] softirqs last disabled at (170785): [<ffffffffc1271ec6>] iwl_pcie_enqueue_hcmd+0x116/0xa00 [iwlwifi] Signed-off-by: Jiri Kosina <jkosina@suse.cz> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # LLVM/Clang v12.0.0-rc3 Acked-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/nycvar.YFH.7.76.2103021125430.12405@cbobk.fhfr.pm Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-04-14iwlwifi: fix 11ax disabled bit in the regulatory capability flagsLuca Coelho1-1/+1
[ Upstream commit 07cc40fec9a85e669ea12e161a438d2cbd76f1ed ] When version 2 of the regulatory capability flags API was implemented, the flag to disable 11ax was defined as bit 13, but this was later changed and the bit remained as bit 10, like in version 1. This was never changed in the driver, so we were checking for the wrong bit in newer devices. Fix it. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Fixes: e27c506a985c ("iwlwifi: regulatory: regulatory capabilities api change") Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/iwlwifi.20210326125611.6d28516b59cd.Id0248d5e4662695254f49ce37b0268834ed52918@changeid Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-04-14iwlwifi: pcie: properly set LTR workarounds on 22000 devicesJohannes Berg3-32/+37
commit 25628bc08d4526d3673ca7d039eb636aa9006076 upstream. As the context info gen3 code is only called for >=AX210 devices (from iwl_trans_pcie_gen2_start_fw()) the code there to set LTR on 22000 devices cannot actually do anything (22000 < AX210). Fix this by moving the LTR code to iwl_trans_pcie_gen2_start_fw() where it can handle both devices. This then requires that we kick the firmware only after that rather than doing it from the context info code. Note that this again had a dead branch in gen3 code, which I've removed here. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Fixes: ed0022da8bd9 ("iwlwifi: pcie: set LTR on more devices") Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/iwlwifi.20210326125611.675486178ed1.Ib61463aba6920645059e366dcdca4c4c77f0ff58@changeid Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-07ath10k: hold RCU lock when calling ieee80211_find_sta_by_ifaddr()Shuah Khan1-2/+5
[ Upstream commit 09078368d516918666a0122f2533dc73676d3d7e ] ieee80211_find_sta_by_ifaddr() must be called under the RCU lock and the resulting pointer is only valid under RCU lock as well. Fix ath10k_wmi_tlv_op_pull_peer_stats_info() to hold RCU lock before it calls ieee80211_find_sta_by_ifaddr() and release it when the resulting pointer is no longer needed. This problem was found while reviewing code to debug RCU warn from ath10k_wmi_tlv_parse_peer_stats_info(). Link: https://lore.kernel.org/linux-wireless/7230c9e5-2632-b77e-c4f9-10eca557a5bb@linuxfoundation.org/ Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210210212107.40373-1-skhan@linuxfoundation.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-04-07iwlwifi: pcie: don't disable interrupts for reg_lockJohannes Berg3-22/+16
[ Upstream commit 874020f8adce535cd318af1768ffe744251b6593 ] The only thing we do touching the device in hard interrupt context is, at most, writing an interrupt ACK register, which isn't racing in with anything protected by the reg_lock. Thus, avoid disabling interrupts here for potentially long periods of time, particularly long periods have been observed with dumping of firmware memory (leading to lockup warnings on some devices.) Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210210135352.da916ab91298.I064c3e7823b616647293ed97da98edefb9ce9435@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-04-07rtw88: coex: 8821c: correct antenna switch functionGuo-Feng Fan1-8/+8
[ Upstream commit adba838af159914eb98fcd55bfd3a89c9a7d41a8 ] This patch fixes a defect that uses incorrect function to access registers. Use 8 and 32 bit access function to access 8 and 32 bit long data respectively. Signed-off-by: Guo-Feng Fan <vincent_fann@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210202055012.8296-2-pkshih@realtek.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-04-07ath11k: add ieee80211_unregister_hw to avoid kernel crash caused by NULL pointerWen Gong1-2/+5
[ Upstream commit 0d96968315d7ffbd70d608b29e9bea084210b96d ] When function return fail to __ath11k_mac_register after success called ieee80211_register_hw, then it set wiphy->dev.parent to NULL by SET_IEEE80211_DEV(ar->hw, NULL) in end of __ath11k_mac_register, then cfg80211_get_drvinfo will be called by below call stack, but the wiphy->dev.parent is NULL, so kernel crash. Call stack to cfg80211_get_drvinfo: NetworkManager 826 [001] 6696.731371: probe:cfg80211_get_drvinfo: (ffffffffc107d8f0) ffffffffc107d8f1 cfg80211_get_drvinfo+0x1 (/lib/modules/5.10.0-rc1-wt-ath+/kernel/net/wireless-back/cfg80211.ko) ffffffff9d8fc529 ethtool_get_drvinfo+0x99 (vmlinux) ffffffff9d90080e dev_ethtool+0x1dbe (vmlinux) ffffffff9d8b88f7 dev_ioctl+0xb7 (vmlinux) ffffffff9d8668de sock_do_ioctl+0xae (vmlinux) ffffffff9d866d60 sock_ioctl+0x350 (vmlinux) ffffffff9d2ca30e __x64_sys_ioctl+0x8e (vmlinux) ffffffff9da0dda3 do_syscall_64+0x33 (vmlinux) ffffffff9dc0008c entry_SYSCALL_64_after_hwframe+0x44 (vmlinux) 7feb5f673007 __GI___ioctl+0x7 (/lib/x86_64-linux-gnu/libc-2.23.so) 0 [unknown] ([unknown]) Code of cfg80211_get_drvinfo, the pdev which is wiphy->dev.parent is NULL when kernel crash: void cfg80211_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) { struct wireless_dev *wdev = dev->ieee80211_ptr; struct device *pdev = wiphy_dev(wdev->wiphy); if (pdev->driver) .... kernel crash log: [ 973.619550] ath11k_pci 0000:05:00.0: failed to perform regd update : -16 [ 973.619555] ath11k_pci 0000:05:00.0: ath11k regd update failed: -16 [ 973.619566] ath11k_pci 0000:05:00.0: failed register the radio with mac80211: -16 [ 973.619618] ath11k_pci 0000:05:00.0: failed to create pdev core: -16 [ 973.636035] BUG: kernel NULL pointer dereference, address: 0000000000000068 [ 973.636046] #PF: supervisor read access in kernel mode [ 973.636050] #PF: error_code(0x0000) - not-present page [ 973.636054] PGD 800000012452e067 P4D 800000012452e067 PUD 12452d067 PMD 0 [ 973.636064] Oops: 0000 [#1] SMP PTI [ 973.636072] CPU: 3 PID: 848 Comm: NetworkManager Kdump: loaded Tainted: G W OE 5.10.0-rc1-wt-ath+ #24 [ 973.636076] Hardware name: LENOVO 418065C/418065C, BIOS 83ET63WW (1.33 ) 07/29/2011 [ 973.636161] RIP: 0010:cfg80211_get_drvinfo+0x25/0xd0 [cfg80211] [ 973.636169] Code: e9 c9 fe ff ff 66 66 66 66 90 55 53 ba 20 00 00 00 48 8b af 08 03 00 00 48 89 f3 48 8d 7e 04 48 8b 45 00 48 8b 80 90 01 00 00 <48> 8b 40 68 48 85 c0 0f 84 8d 00 00 00 48 8b 30 e8 a6 cc 72 c7 48 [ 973.636174] RSP: 0018:ffffaafb4040bbe0 EFLAGS: 00010286 [ 973.636180] RAX: 0000000000000000 RBX: ffffaafb4040bbfc RCX: 0000000000000000 [ 973.636184] RDX: 0000000000000020 RSI: ffffaafb4040bbfc RDI: ffffaafb4040bc00 [ 973.636188] RBP: ffff8a84c9568950 R08: 722d302e30312e35 R09: 74612d74772d3163 [ 973.636192] R10: 3163722d302e3031 R11: 2b6874612d74772d R12: ffffaafb4040bbfc [ 973.636196] R13: 00007ffe453707c0 R14: ffff8a84c9568000 R15: 0000000000000000 [ 973.636202] FS: 00007fd3d179b940(0000) GS:ffff8a84fa2c0000(0000) knlGS:0000000000000000 [ 973.636206] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 973.636211] CR2: 0000000000000068 CR3: 00000001153b6002 CR4: 00000000000606e0 [ 973.636215] Call Trace: [ 973.636234] ethtool_get_drvinfo+0x99/0x1f0 [ 973.636246] dev_ethtool+0x1dbe/0x2be0 [ 973.636256] ? mntput_no_expire+0x35/0x220 [ 973.636264] ? inet_ioctl+0x1ce/0x200 [ 973.636274] ? tomoyo_path_number_perm+0x68/0x1d0 [ 973.636282] ? kmem_cache_alloc+0x3cb/0x430 [ 973.636290] ? dev_ioctl+0xb7/0x570 [ 973.636295] dev_ioctl+0xb7/0x570 [ 973.636307] sock_do_ioctl+0xae/0x150 [ 973.636315] ? sock_ioctl+0x350/0x3c0 [ 973.636319] sock_ioctl+0x350/0x3c0 [ 973.636332] ? __x64_sys_ioctl+0x8e/0xd0 [ 973.636339] ? dlci_ioctl_set+0x30/0x30 [ 973.636346] __x64_sys_ioctl+0x8e/0xd0 [ 973.636359] do_syscall_64+0x33/0x80 [ 973.636368] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Sequence of function call when wlan load for success case when function __ath11k_mac_register return 0: kworker/u16:3-e 2922 [001] 6696.729734: probe:ieee80211_register_hw: (ffffffffc116ae60) kworker/u16:3-e 2922 [001] 6696.730210: probe:ieee80211_if_add: (ffffffffc1185cc0) NetworkManager 826 [001] 6696.731345: probe:ethtool_get_drvinfo: (ffffffff9d8fc490) NetworkManager 826 [001] 6696.731371: probe:cfg80211_get_drvinfo: (ffffffffc107d8f0) NetworkManager 826 [001] 6696.731639: probe:ethtool_get_drvinfo: (ffffffff9d8fc490) NetworkManager 826 [001] 6696.731653: probe:cfg80211_get_drvinfo: (ffffffffc107d8f0) NetworkManager 826 [001] 6696.732866: probe:ethtool_get_drvinfo: (ffffffff9d8fc490) NetworkManager 826 [001] 6696.732893: probe:cfg80211_get_drvinfo: (ffffffffc107d8f0) systemd-udevd 3850 [003] 6696.737199: probe:ethtool_get_drvinfo: (ffffffff9d8fc490) systemd-udevd 3850 [003] 6696.737226: probe:cfg80211_get_drvinfo: (ffffffffc107d8f0) NetworkManager 826 [000] 6696.759950: probe:ethtool_get_drvinfo: (ffffffff9d8fc490) NetworkManager 826 [000] 6696.759967: probe:cfg80211_get_drvinfo: (ffffffffc107d8f0) NetworkManager 826 [000] 6696.760057: probe:ethtool_get_drvinfo: (ffffffff9d8fc490) NetworkManager 826 [000] 6696.760062: probe:cfg80211_get_drvinfo: (ffffffffc107d8f0) After apply this patch, kernel crash gone, and below is the test case's sequence of function call and log when wlan load with fail by function ath11k_regd_update, and __ath11k_mac_register return fail: kworker/u16:5-e 192 [001] 215.174388: probe:ieee80211_register_hw: (ffffffffc1131e60) kworker/u16:5-e 192 [000] 215.174973: probe:ieee80211_if_add: (ffffffffc114ccc0) NetworkManager 846 [001] 215.175857: probe:ethtool_get_drvinfo: (ffffffff928fc490) kworker/u16:5-e 192 [000] 215.175867: probe:ieee80211_unregister_hw: (ffffffffc1131970) NetworkManager 846 [001] 215.175880: probe:cfg80211_get_drvinfo: (ffffffffc107f8f0) NetworkManager 846 [001] 215.176105: probe:ethtool_get_drvinfo: (ffffffff928fc490) NetworkManager 846 [001] 215.176118: probe:cfg80211_get_drvinfo: (ffffffffc107f8f0) [ 215.175859] ath11k_pci 0000:05:00.0: ath11k regd update failed: -16 NetworkManager 846 [001] 215.196420: probe:ethtool_get_drvinfo: (ffffffff928fc490) NetworkManager 846 [001] 215.196430: probe:cfg80211_get_drvinfo: (ffffffffc107f8f0) [ 215.258598] ath11k_pci 0000:05:00.0: failed register the radio with mac80211: -16 [ 215.258613] ath11k_pci 0000:05:00.0: failed to create pdev core: -16 When ath11k_regd_update or ath11k_debugfs_register return fail, function ieee80211_unregister_hw of mac80211 will be called, then it will wait untill cfg80211_get_drvinfo finished, the wiphy->dev.parent is not NULL at this moment, after that, it set wiphy->dev.parent to NULL by SET_IEEE80211_DEV(ar->hw, NULL) in end of __ath11k_mac_register, so not happen kernel crash. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Wen Gong <wgong@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1608607824-16067-1-git-send-email-wgong@codeaurora.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-04-07brcmfmac: clear EAP/association status bits on linkdown eventsLuca Pesce1-2/+5
[ Upstream commit e862a3e4088070de352fdafe9bd9e3ae0a95a33c ] This ensure that previous association attempts do not leave stale statuses on subsequent attempts. This fixes the WARN_ON(!cr->bss)) from __cfg80211_connect_result() when connecting to an AP after a previous connection failure (e.g. where EAP fails due to incorrect psk but association succeeded). In some scenarios, indeed, brcmf_is_linkup() was reporting a link up event too early due to stale BRCMF_VIF_STATUS_ASSOC_SUCCESS bit, thus reporting to cfg80211 a connection result with a zeroed bssid (vif->profile.bssid is still empty), causing the WARN_ON due to the call to cfg80211_get_bss() with the empty bssid. Signed-off-by: Luca Pesce <luca.pesce@vimar.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1608807119-21785-1-git-send-email-luca.pesce@vimar.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-30mt76: fix tx skb error handling in mt76_dma_tx_queue_skbFelix Fietkau1-9/+6
[ Upstream commit ae064fc0e32a4d28389086d9f4b260a0c157cfee ] When running out of room in the tx queue after calling drv->tx_prepare_skb, the buffer list will already have been modified on MT7615 and newer drivers. This can leak a DMA mapping and will show up as swiotlb allocation failures on x86. Fix this by moving the queue length check further up. This is less accurate, since it can overestimate the needed room in the queue on MT7615 and newer, but the difference is small enough to not matter in practice. Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210216135119.23809-1-nbd@nbd.name Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-25iwlwifi: Add a new card for MA familyMatti Gottlieb3-0/+19
[ Upstream commit ac1a98e1e924e7e8d7c7e5b1ca8ddc522e10ddd0 ] Add a PCI ID for snj with mr in AX family. Signed-off-by: Matti Gottlieb <matti.gottlieb@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20201209231352.101ac3058c04.Idd28706b122cdc8103956f8e72bb062fe4adb54e@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-17ath11k: fix AP mode for QCA6390Kalle Valo1-2/+2
[ Upstream commit 77d7e87128d4dfb400df4208b2812160e999c165 ] Commit c134d1f8c436 ("ath11k: Handle errors if peer creation fails") completely broke AP mode on QCA6390: kernel: [ 151.230734] ath11k_pci 0000:06:00.0: failed to create peer after vdev start delay: -22 wpa_supplicant[2307]: Failed to set beacon parameters wpa_supplicant[2307]: Interface initialization failed wpa_supplicant[2307]: wlan0: interface state UNINITIALIZED->DISABLED wpa_supplicant[2307]: wlan0: AP-DISABLED wpa_supplicant[2307]: wlan0: Unable to setup interface. wpa_supplicant[2307]: Failed to initialize AP interface This was because commit c134d1f8c436 ("ath11k: Handle errors if peer creation fails") added error handling for ath11k_peer_create(), which had been failing all along but was unnoticed due to the missing error handling. The actual bug was introduced already in commit aa44b2f3ecd4 ("ath11k: start vdev if a bss peer is already created"). ath11k_peer_create() was failing because for AP mode the peer is created already earlier op_add_interface() and we should skip creation here, but the check for modes was wrong. Fixing that makes AP mode work again. This shouldn't affect IPQ8074 nor QCN9074 as they have hw_params.vdev_start_delay disabled. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Fixes: c134d1f8c436 ("ath11k: Handle errors if peer creation fails") Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1614006849-25764-1-git-send-email-kvalo@codeaurora.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-17ath11k: start vdev if a bss peer is already createdCarl Huang3-2/+25
[ Upstream commit aa44b2f3ecd41f90b7e477158036648a49d21a32 ] For QCA6390, bss peer must be created before vdev is to start. This change is to start vdev if a bss peer is created. Otherwise, ath11k delays to start vdev. This fixes an issue in a case where HT/VHT/HE settings change between authentication and association, e.g., due to the user space request to disable HT. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Carl Huang <cjhuang@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201211051358.9191-1-cjhuang@codeaurora.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-17ath11k: peer delete synchronization with firmwareRitesh Singh6-7/+75
[ Upstream commit 690ace20ff790f443c3cbaf12e1769e4eb0072db ] Peer creation in firmware fails, if last peer deletion is still in progress. Hence, add wait for the event after deleting every peer from host driver to synchronize with firmware. Signed-off-by: Ritesh Singh <ritesi@codeaurora.org> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1605514143-17652-3-git-send-email-mkenna@codeaurora.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-17mt76: dma: do not report truncated frames to mac80211Lorenzo Bianconi1-4/+7
commit d0bd52c591a1070c54dc428e926660eb4f981099 upstream. Commit b102f0c522cf6 ("mt76: fix array overflow on receiving too many fragments for a packet") fixes a possible OOB access but it introduces a memory leak since the pending frame is not released to page_frag_cache if the frag array of skb_shared_info is full. Commit 93a1d4791c10 ("mt76: dma: fix a possible memory leak in mt76_add_fragment()") fixes the issue but does not free the truncated skb that is forwarded to mac80211 layer. Fix the leftover issue discarding even truncated skbs. Fixes: 93a1d4791c10 ("mt76: dma: fix a possible memory leak in mt76_add_fragment()") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/a03166fcc8214644333c68674a781836e0f57576.1612697217.git.lorenzo@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-17ath9k: fix transmitting to stations in dynamic SMPS modeFelix Fietkau2-1/+8
commit 3b9ea7206d7e1fdd7419cbd10badd3b2c80d04b4 upstream. When transmitting to a receiver in dynamic SMPS mode, all transmissions that use multiple spatial streams need to be sent using CTS-to-self or RTS/CTS to give the receiver's extra chains some time to wake up. This fixes the tx rate getting stuck at <= MCS7 for some clients, especially Intel ones, which make aggressive use of SMPS. Cc: stable@vger.kernel.org Reported-by: Martin Kennedy <hurricos@gmail.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210214184911.96702-1-nbd@nbd.name Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-11mwifiex: pcie: skip cancel_work_sync() on reset failure pathTsuchiya Yuto2-1/+19
[ Upstream commit 4add4d988f95f47493500a7a19c623827061589b ] If a reset is performed, but even the reset fails for some reasons (e.g., on Surface devices, the fw reset requires another quirks), cancel_work_sync() hangs in mwifiex_cleanup_pcie(). # firmware went into a bad state [...] [ 1608.281690] mwifiex_pcie 0000:03:00.0: info: shutdown mwifiex... [ 1608.282724] mwifiex_pcie 0000:03:00.0: rx_pending=0, tx_pending=1, cmd_pending=0 [ 1608.292400] mwifiex_pcie 0000:03:00.0: PREP_CMD: card is removed [ 1608.292405] mwifiex_pcie 0000:03:00.0: PREP_CMD: card is removed # reset performed after firmware went into a bad state [ 1609.394320] mwifiex_pcie 0000:03:00.0: WLAN FW already running! Skip FW dnld [ 1609.394335] mwifiex_pcie 0000:03:00.0: WLAN FW is active # but even the reset failed [ 1619.499049] mwifiex_pcie 0000:03:00.0: mwifiex_cmd_timeout_func: Timeout cmd id = 0xfa, act = 0xe000 [ 1619.499094] mwifiex_pcie 0000:03:00.0: num_data_h2c_failure = 0 [ 1619.499103] mwifiex_pcie 0000:03:00.0: num_cmd_h2c_failure = 0 [ 1619.499110] mwifiex_pcie 0000:03:00.0: is_cmd_timedout = 1 [ 1619.499117] mwifiex_pcie 0000:03:00.0: num_tx_timeout = 0 [ 1619.499124] mwifiex_pcie 0000:03:00.0: last_cmd_index = 0 [ 1619.499133] mwifiex_pcie 0000:03:00.0: last_cmd_id: fa 00 07 01 07 01 07 01 07 01 [ 1619.499140] mwifiex_pcie 0000:03:00.0: last_cmd_act: 00 e0 00 00 00 00 00 00 00 00 [ 1619.499147] mwifiex_pcie 0000:03:00.0: last_cmd_resp_index = 3 [ 1619.499155] mwifiex_pcie 0000:03:00.0: last_cmd_resp_id: 07 81 07 81 07 81 07 81 07 81 [ 1619.499162] mwifiex_pcie 0000:03:00.0: last_event_index = 2 [ 1619.499169] mwifiex_pcie 0000:03:00.0: last_event: 58 00 58 00 58 00 58 00 58 00 [ 1619.499177] mwifiex_pcie 0000:03:00.0: data_sent=0 cmd_sent=1 [ 1619.499185] mwifiex_pcie 0000:03:00.0: ps_mode=0 ps_state=0 [ 1619.499215] mwifiex_pcie 0000:03:00.0: info: _mwifiex_fw_dpc: unregister device # mwifiex_pcie_work hang happening [ 1823.233923] INFO: task kworker/3:1:44 blocked for more than 122 seconds. [ 1823.233932] Tainted: G WC OE 5.10.0-rc1-1-mainline #1 [ 1823.233935] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 1823.233940] task:kworker/3:1 state:D stack: 0 pid: 44 ppid: 2 flags:0x00004000 [ 1823.233960] Workqueue: events mwifiex_pcie_work [mwifiex_pcie] [ 1823.233965] Call Trace: [ 1823.233981] __schedule+0x292/0x820 [ 1823.233990] schedule+0x45/0xe0 [ 1823.233995] schedule_timeout+0x11c/0x160 [ 1823.234003] wait_for_completion+0x9e/0x100 [ 1823.234012] __flush_work.isra.0+0x156/0x210 [ 1823.234018] ? flush_workqueue_prep_pwqs+0x130/0x130 [ 1823.234026] __cancel_work_timer+0x11e/0x1a0 [ 1823.234035] mwifiex_cleanup_pcie+0x28/0xd0 [mwifiex_pcie] [ 1823.234049] mwifiex_free_adapter+0x24/0xe0 [mwifiex] [ 1823.234060] _mwifiex_fw_dpc+0x294/0x560 [mwifiex] [ 1823.234074] mwifiex_reinit_sw+0x15d/0x300 [mwifiex] [ 1823.234080] mwifiex_pcie_reset_done+0x50/0x80 [mwifiex_pcie] [ 1823.234087] pci_try_reset_function+0x5c/0x90 [ 1823.234094] process_one_work+0x1d6/0x3a0 [ 1823.234100] worker_thread+0x4d/0x3d0 [ 1823.234107] ? rescuer_thread+0x410/0x410 [ 1823.234112] kthread+0x142/0x160 [ 1823.234117] ? __kthread_bind_mask+0x60/0x60 [ 1823.234124] ret_from_fork+0x22/0x30 [...] This is a deadlock caused by calling cancel_work_sync() in mwifiex_cleanup_pcie(): - Device resets are done via mwifiex_pcie_card_reset() - which schedules card->work to call mwifiex_pcie_card_reset_work() - which calls pci_try_reset_function(). - This leads to mwifiex_pcie_reset_done() be called on the same workqueue, which in turn calls - mwifiex_reinit_sw() and that calls - _mwifiex_fw_dpc(). The problem is now that _mwifiex_fw_dpc() calls mwifiex_free_adapter() in case firmware initialization fails. That ends up calling mwifiex_cleanup_pcie(). Note that all those calls are still running on the workqueue. So when mwifiex_cleanup_pcie() now calls cancel_work_sync(), it's really waiting on itself to complete, causing a deadlock. This commit fixes the deadlock by skipping cancel_work_sync() on a reset failure path. After this commit, when reset fails, the following output is expected to be shown: kernel: mwifiex_pcie 0000:03:00.0: info: _mwifiex_fw_dpc: unregister device kernel: mwifiex: Failed to bring up adapter: -5 kernel: mwifiex_pcie 0000:03:00.0: reinit failed: -5 To reproduce this issue, for example, try putting the root port of wifi into D3 (replace "00:1d.3" with your setup). # put into D3 (root port) sudo setpci -v -s 00:1d.3 CAP_PM+4.b=0b Cc: Maximilian Luz <luzmaximilian@gmail.com> Signed-off-by: Tsuchiya Yuto <kitakar@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201028142346.18355-1-kitakar@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-07brcmfmac: Add DMI nvram filename quirk for Voyo winpad A15 tabletHans de Goede1-0/+18
[ Upstream commit a338c874d3d9d2463f031e89ae14942929b93db6 ] The Voyo winpad A15 tablet contains quite generic names in the sys_vendor and product_name DMI strings, without this patch brcmfmac will try to load: rcmfmac4330-sdio.To be filled by O.E.M.-To be filled by O.E.M..txt as nvram file which is a bit too generic. Add a DMI quirk so that a unique and clearly identifiable nvram file name is used on the Voyo winpad A15 tablet. While preparing a matching linux-firmware update I noticed that the nvram is identical to the nvram used on the Prowise-PT301 tablet, so the new DMI quirk entry simply points to the already existing Prowise-PT301 nvram file. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210129171413.139880-2-hdegoede@redhat.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-07brcmfmac: Add DMI nvram filename quirk for Predia Basic tabletHans de Goede1-0/+14
[ Upstream commit af4b3a6f36d6c2fc5fca026bccf45e0fdcabddd9 ] The Predia Basic tablet contains quite generic names in the sys_vendor and product_name DMI strings, without this patch brcmfmac will try to load: brcmfmac43340-sdio.Insyde-CherryTrail.txt as nvram file which is a bit too generic. Add a DMI quirk so that a unique and clearly identifiable nvram file name is used on the Predia Basic tablet. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210129171413.139880-1-hdegoede@redhat.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-07ath10k: fix wmi mgmt tx queue full due to race conditionMiaoqing Pan1-11/+4
[ Upstream commit b55379e343a3472c35f4a1245906db5158cab453 ] Failed to transmit wmi management frames: [84977.840894] ath10k_snoc a000000.wifi: wmi mgmt tx queue is full [84977.840913] ath10k_snoc a000000.wifi: failed to transmit packet, dropping: -28 [84977.840924] ath10k_snoc a000000.wifi: failed to submit frame: -28 [84977.840932] ath10k_snoc a000000.wifi: failed to transmit frame: -28 This issue is caused by race condition between skb_dequeue and __skb_queue_tail. The queue of ‘wmi_mgmt_tx_queue’ is protected by a different lock: ar->data_lock vs list->lock, the result is no protection. So when ath10k_mgmt_over_wmi_tx_work() and ath10k_mac_tx_wmi_mgmt() running concurrently on different CPUs, there appear to be a rare corner cases when the queue length is 1, CPUx (skb_deuque) CPUy (__skb_queue_tail) next=list prev=list struct sk_buff *skb = skb_peek(list); WRITE_ONCE(newsk->next, next); WRITE_ONCE(list->qlen, list->qlen - 1);WRITE_ONCE(newsk->prev, prev); next = skb->next; WRITE_ONCE(next->prev, newsk); prev = skb->prev; WRITE_ONCE(prev->next, newsk); skb->next = skb->prev = NULL; list->qlen++; WRITE_ONCE(next->prev, prev); WRITE_ONCE(prev->next, next); If the instruction ‘next = skb->next’ is executed before ‘WRITE_ONCE(prev->next, newsk)’, newsk will be lost, as CPUx get the old ‘next’ pointer, but the length is still added by one. The final result is the length of the queue will reach the maximum value but the queue is empty. So remove ar->data_lock, and use 'skb_queue_tail' instead of '__skb_queue_tail' to prevent the potential race condition. Also switch to use skb_queue_len_lockless, in case we queue a few SKBs simultaneously. Tested-on: WCN3990 hw1.0 SNOC WLAN.HL.3.1.c2-00033-QCAHLSWMTPLZ-1 Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org> Reviewed-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1608618887-8857-1-git-send-email-miaoqing@codeaurora.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-07mt76: mt7615: reset token when mac_reset happensRyder Lee3-12/+22
[ Upstream commit a6275e934605646ef81b02d8d1164f21343149c9 ] Reset token in mt7615_mac_reset_work() to avoid possible leakege. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-07wlcore: Fix command execute failure 19 for wl12xxTony Lindgren3-20/+1
[ Upstream commit cb88d01b67383a095e3f7caeb4cdade5a6cf0417 ] We can currently get a "command execute failure 19" error on beacon loss if the signal is weak: wlcore: Beacon loss detected. roles:0xff wlcore: Connection loss work (role_id: 0). ... wlcore: ERROR command execute failure 19 ... WARNING: CPU: 0 PID: 1552 at drivers/net/wireless/ti/wlcore/main.c:803 ... (wl12xx_queue_recovery_work.part.0 [wlcore]) (wl12xx_cmd_role_start_sta [wlcore]) (wl1271_op_bss_info_changed [wlcore]) (ieee80211_prep_connection [mac80211]) Error 19 is defined as CMD_STATUS_WRONG_NESTING from the wlcore firmware, and seems to mean that the firmware no longer wants to see the quirk handling for WLCORE_QUIRK_START_STA_FAILS done. This quirk got added with commit 18eab430700d ("wlcore: workaround start_sta problem in wl12xx fw"), and it seems that this already got fixed in the firmware long time ago back in 2012 as wl18xx never had this quirk in place to start with. As we no longer even support firmware that early, to me it seems that it's safe to just drop WLCORE_QUIRK_START_STA_FAILS to fix the error. Looks like earlier firmware got disabled back in 2013 with commit 0e284c074ef9 ("wl12xx: increase minimum singlerole firmware version required"). If it turns out we still need WLCORE_QUIRK_START_STA_FAILS with any firmware that the driver works with, we can simply revert this patch and add extra checks for firmware version used. With this fix wlcore reconnects properly after a beacon loss. Cc: Raz Bouganim <r-bouganim@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210115065613.7731-1-tony@atomide.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-07rsi: Move card interrupt handling to RX threadMarek Vasut3-51/+15
[ Upstream commit 287431463e786766e05e4dc26d0a11d5f8ac8815 ] The interrupt handling of the RS911x is particularly heavy. For each RX packet, the card does three SDIO transactions, one to read interrupt status register, one to RX buffer length, one to read the RX packet(s). This translates to ~330 uS per one cycle of interrupt handler. In case there is more incoming traffic, this will be more. The drivers/mmc/core/sdio_irq.c has the following comment, quote "Just like traditional hard IRQ handlers, we expect SDIO IRQ handlers to be quick and to the point, so that the holding of the host lock does not cover too much work that doesn't require that l