summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2025-08-01ice: Fix a null pointer dereference in ice_copy_and_init_pkg()Haoxiang Li1-0/+2
commit 4ff12d82dac119b4b99b5a78b5af3bf2474c0a36 upstream. Add check for the return value of devm_kmemdup() to prevent potential null pointer dereference. Fixes: c76488109616 ("ice: Implement Dynamic Device Personalization (DDP) download") Cc: stable@vger.kernel.org Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-08-01gve: Fix stuck TX queue for DQ queue formatPraveen Kaligineedi1-30/+37
commit b03f15c0192b184078206760c839054ae6eb4eaa upstream. gve_tx_timeout was calculating missed completions in a way that is only relevant in the GQ queue format. Additionally, it was attempting to disable device interrupts, which is not needed in either GQ or DQ queue formats. As a result, TX timeouts with the DQ queue format likely would have triggered early resets without kicking the queue at all. This patch drops the check for pending work altogether and always kicks the queue after validating the queue has not seen a TX timeout too recently. Cc: stable@vger.kernel.org Fixes: 87a7f321bb6a ("gve: Recover from queue stall due to missed IRQ") Co-developed-by: Tim Hostetler <thostet@google.com> Signed-off-by: Tim Hostetler <thostet@google.com> Signed-off-by: Praveen Kaligineedi <pkaligineedi@google.com> Signed-off-by: Harshitha Ramamurthy <hramamurthy@google.com> Link: https://patch.msgid.link/20250717192024.1820931-1-hramamurthy@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-08-01e1000e: ignore uninitialized checksum word on tgpJacek Kowalski2-0/+9
commit 61114910a5f6a71d0b6ea3b95082dfe031b19dfe upstream. As described by Vitaly Lifshits: > Starting from Tiger Lake, LAN NVM is locked for writes by SW, so the > driver cannot perform checksum validation and correction. This means > that all NVM images must leave the factory with correct checksum and > checksum valid bit set. Unfortunately some systems have left the factory with an uninitialized value of 0xFFFF at register address 0x3F (checksum word location). So on Tiger Lake platform we ignore the computed checksum when such condition is encountered. Signed-off-by: Jacek Kowalski <jacek@jacekk.info> Tested-by: Vlad URSU <vlad@ursu.me> Fixes: 4051f68318ca9 ("e1000e: Do not take care about recovery NVM checksum") Cc: stable@vger.kernel.org Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Vitaly Lifshits <vitaly.lifshits@intel.com> Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-08-01e1000e: disregard NVM checksum on tgp when valid checksum bit is not setJacek Kowalski1-0/+2
commit 536fd741c7ac907d63166cdae1081b1febfab613 upstream. As described by Vitaly Lifshits: > Starting from Tiger Lake, LAN NVM is locked for writes by SW, so the > driver cannot perform checksum validation and correction. This means > that all NVM images must leave the factory with correct checksum and > checksum valid bit set. Since Tiger Lake devices were the first to have > this lock, some systems in the field did not meet this requirement. > Therefore, for these transitional devices we skip checksum update and > verification, if the valid bit is not set. Signed-off-by: Jacek Kowalski <jacek@jacekk.info> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Vitaly Lifshits <vitaly.lifshits@intel.com> Fixes: 4051f68318ca9 ("e1000e: Do not take care about recovery NVM checksum") Cc: stable@vger.kernel.org Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-08-01dpaa2-switch: Fix device reference count leak in MAC endpoint handlingMa Ke1-3/+12
commit 96e056ffba912ef18a72177f71956a5b347b5177 upstream. The fsl_mc_get_endpoint() function uses device_find_child() for localization, which implicitly calls get_device() to increment the device's reference count before returning the pointer. However, the caller dpaa2_switch_port_connect_mac() fails to properly release this reference in multiple scenarios. We should call put_device() to decrement reference count properly. As comment of device_find_child() says, 'NOTE: you will need to drop the reference with put_device() after use'. Found by code review. Cc: stable@vger.kernel.org Fixes: 84cba72956fd ("dpaa2-switch: integrate the MAC endpoint support") Signed-off-by: Ma Ke <make24@iscas.ac.cn> Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250717022309.3339976-3-make24@iscas.ac.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-08-01dpaa2-eth: Fix device reference count leak in MAC endpoint handlingMa Ke1-3/+12
commit ee9f3a81ab08dfe0538dbd1746f81fd4d5147fdc upstream. The fsl_mc_get_endpoint() function uses device_find_child() for localization, which implicitly calls get_device() to increment the device's reference count before returning the pointer. However, the caller dpaa2_eth_connect_mac() fails to properly release this reference in multiple scenarios. We should call put_device() to decrement reference count properly. As comment of device_find_child() says, 'NOTE: you will need to drop the reference with put_device() after use'. Found by code review. Cc: stable@vger.kernel.org Fixes: 719479230893 ("dpaa2-eth: add MAC/PHY support through phylink") Signed-off-by: Ma Ke <make24@iscas.ac.cn> Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250717022309.3339976-2-make24@iscas.ac.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-08-01net: hns3: default enable tx bounce buffer when smmu enabledJijie Shao2-0/+33
[ Upstream commit 49ade8630f36e9dca2395592cfb0b7deeb07e746 ] The SMMU engine on HIP09 chip has a hardware issue. SMMU pagetable prefetch features may prefetch and use a invalid PTE even the PTE is valid at that time. This will cause the device trigger fake pagefaults. The solution is to avoid prefetching by adding a SYNC command when smmu mapping a iova. But the performance of nic has a sharp drop. Then we do this workaround, always enable tx bounce buffer, avoid mapping/unmapping on TX path. This issue only affects HNS3, so we always enable tx bounce buffer when smmu enabled to improve performance. Fixes: 295ba232a8c3 ("net: hns3: add device version to replace pci revision") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250722125423.1270673-5-shaojijie@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-08-01net: hns3: fixed vf get max channels bugJian Shen1-5/+1
[ Upstream commit b3e75c0bcc53f647311960bc1b0970b9b480ca5a ] Currently, the queried maximum of vf channels is the maximum of channels supported by each TC. However, the actual maximum of channels is the maximum of channels supported by the device. Fixes: 849e46077689 ("net: hns3: add ethtool_ops.get_channels support for VF") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Hao Lan <lanhao@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250722125423.1270673-4-shaojijie@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-08-01net: hns3: disable interrupt when ptp init failedYonglong Liu1-3/+6
[ Upstream commit cde304655f25d94a996c45b0f9956e7dcc2bc4c0 ] When ptp init failed, we'd better disable the interrupt and clear the flag, to avoid early report interrupt at next probe. Fixes: 0bf5eb788512 ("net: hns3: add support for PTP") Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250722125423.1270673-3-shaojijie@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-08-01net: hns3: fix concurrent setting vlan filter issueJian Shen1-15/+21
[ Upstream commit 4555f8f8b6aa46940f55feb6a07704c2935b6d6e ] The vport->req_vlan_fltr_en may be changed concurrently by function hclge_sync_vlan_fltr_state() called in periodic work task and function hclge_enable_vport_vlan_filter() called by user configuration. It may cause the user configuration inoperative. Fixes it by protect the vport->req_vlan_fltr by vport_lock. Fixes: 2ba306627f59 ("net: hns3: add support for modify VLAN filter state") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250722125423.1270673-2-shaojijie@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-08-01can: netlink: can_changelink(): fix NULL pointer deref of struct ↵Marc Kleine-Budde2-3/+21
can_priv::do_set_mode [ Upstream commit c1f3f9797c1f44a762e6f5f72520b2e520537b52 ] Andrei Lalaev reported a NULL pointer deref when a CAN device is restarted from Bus Off and the driver does not implement the struct can_priv::do_set_mode callback. There are 2 code path that call struct can_priv::do_set_mode: - directly by a manual restart from the user space, via can_changelink() - delayed automatic restart after bus off (deactivated by default) To prevent the NULL pointer deference, refuse a manual restart or configure the automatic restart delay in can_changelink() and report the error via extack to user space. As an additional safety measure let can_restart() return an error if can_priv::do_set_mode is not set instead of dereferencing it unchecked. Reported-by: Andrei Lalaev <andrey.lalaev@gmail.com> Closes: https://lore.kernel.org/all/20250714175520.307467-1-andrey.lalaev@gmail.com Fixes: 39549eef3587 ("can: CAN Network device driver and Netlink interface") Link: https://patch.msgid.link/20250718-fix-nullptr-deref-do_set_mode-v1-1-0b520097bb96@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-08-01i40e: When removing VF MAC filters, only check PF-set MACJamie Bainbridge1-2/+2
[ Upstream commit 5a0df02999dbe838c3feed54b1d59e9445f68b89 ] When the PF is processing an Admin Queue message to delete a VF's MACs from the MAC filter, we currently check if the PF set the MAC and if the VF is trusted. This results in undesirable behaviour, where if a trusted VF with a PF-set MAC sets itself down (which sends an AQ message to delete the VF's MAC filters) then the VF MAC is erased from the interface. This results in the VF losing its PF-set MAC which should not happen. There is no need to check for trust at all, because an untrusted VF cannot change its own MAC. The only check needed is whether the PF set the MAC. If the PF set the MAC, then don't erase the MAC on link-down. Resolve this by changing the deletion check only for PF-set MAC. (the out-of-tree driver has also intentionally removed the check for VF trust here with OOT driver version 2.26.8, this changes the Linux kernel driver behaviour and comment to match the OOT driver behaviour) Fixes: ea2a1cfc3b201 ("i40e: Fix VF MAC filter removal") Signed-off-by: Jamie Bainbridge <jamie.bainbridge@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-08-01i40e: report VF tx_dropped with tx_errors instead of tx_discardsDennis Chen1-1/+1
[ Upstream commit 50b2af451597ca6eefe9d4543f8bbf8de8aa00e7 ] Currently the tx_dropped field in VF stats is not updated correctly when reading stats from the PF. This is because it reads from i40e_eth_stats.tx_discards which seems to be unused for per VSI stats, as it is not updated by i40e_update_eth_stats() and the corresponding register, GLV_TDPC, is not implemented[1]. Use i40e_eth_stats.tx_errors instead, which is actually updated by i40e_update_eth_stats() by reading from GLV_TEPC. To test, create a VF and try to send bad packets through it: $ echo 1 > /sys/class/net/enp2s0f0/device/sriov_numvfs $ cat test.py from scapy.all import * vlan_pkt = Ether(dst="ff:ff:ff:ff:ff:ff") / Dot1Q(vlan=999) / IP(dst="192.168.0.1") / ICMP() ttl_pkt = IP(dst="8.8.8.8", ttl=0) / ICMP() print("Send packet with bad VLAN tag") sendp(vlan_pkt, iface="enp2s0f0v0") print("Send packet with TTL=0") sendp(ttl_pkt, iface="enp2s0f0v0") $ ip -s link show dev enp2s0f0 16: enp2s0f0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DEFAULT group default qlen 1000 link/ether 3c:ec:ef:b7:e0:ac brd ff:ff:ff:ff:ff:ff RX: bytes packets errors dropped missed mcast 0 0 0 0 0 0 TX: bytes packets errors dropped carrier collsns 0 0 0 0 0 0 vf 0 link/ether e2:c6:fd:c1:1e:92 brd ff:ff:ff:ff:ff:ff, spoof checking on, link-state auto, trust off RX: bytes packets mcast bcast dropped 0 0 0 0 0 TX: bytes packets dropped 0 0 0 $ python test.py Send packet with bad VLAN tag . Sent 1 packets. Send packet with TTL=0 . Sent 1 packets. $ ip -s link show dev enp2s0f0 16: enp2s0f0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DEFAULT group default qlen 1000 link/ether 3c:ec:ef:b7:e0:ac brd ff:ff:ff:ff:ff:ff RX: bytes packets errors dropped missed mcast 0 0 0 0 0 0 TX: bytes packets errors dropped carrier collsns 0 0 0 0 0 0 vf 0 link/ether e2:c6:fd:c1:1e:92 brd ff:ff:ff:ff:ff:ff, spoof checking on, link-state auto, trust off RX: bytes packets mcast bcast dropped 0 0 0 0 0 TX: bytes packets dropped 0 0 0 A packet with non-existent VLAN tag and a packet with TTL = 0 are sent, but tx_dropped is not incremented. After patch: $ ip -s link show dev enp2s0f0 19: enp2s0f0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DEFAULT group default qlen 1000 link/ether 3c:ec:ef:b7:e0:ac brd ff:ff:ff:ff:ff:ff RX: bytes packets errors dropped missed mcast 0 0 0 0 0 0 TX: bytes packets errors dropped carrier collsns 0 0 0 0 0 0 vf 0 link/ether 4a:b7:3d:37:f7:56 brd ff:ff:ff:ff:ff:ff, spoof checking on, link-state auto, trust off RX: bytes packets mcast bcast dropped 0 0 0 0 0 TX: bytes packets dropped 0 0 2 Fixes: dc645daef9af5bcbd9c ("i40e: implement VF stats NDO") Signed-off-by: Dennis Chen <dechen@redhat.com> Link: https://www.intel.com/content/www/us/en/content-details/596333/intel-ethernet-controller-x710-tm4-at2-carlsville-datasheet.html Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-08-01net/mlx5: E-Switch, Fix peer miss rules to use peer eswitchShahar Shitrit1-54/+54
[ Upstream commit 5b4c56ad4da0aa00b258ab50b1f5775b7d3108c7 ] In the original design, it is assumed local and peer eswitches have the same number of vfs. However, in new firmware, local and peer eswitches can have different number of vfs configured by mlxconfig. In such configuration, it is incorrect to derive the number of vfs from the local device's eswitch. Fix this by updating the peer miss rules add and delete functions to use the peer device's eswitch and vf count instead of the local device's information, ensuring correct behavior regardless of vf configuration differences. Fixes: ac004b832128 ("net/mlx5e: E-Switch, Add peer miss rules") Signed-off-by: Shahar Shitrit <shshitrit@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/1752753970-261832-3-git-send-email-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-08-01net/mlx5: Fix memory leak in cmd_exec()Chiara Meiohas1-2/+2
[ Upstream commit 3afa3ae3db52e3c216d77bd5907a5a86833806cc ] If cmd_exec() is called with callback and mlx5_cmd_invoke() returns an error, resources allocated in cmd_exec() will not be freed. Fix the code to release the resources if mlx5_cmd_invoke() returns an error. Fixes: f086470122d5 ("net/mlx5: cmdif, Return value improvements") Reported-by: Alex Tereshkin <atereshkin@nvidia.com> Signed-off-by: Chiara Meiohas <cmeiohas@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Vlad Dumitrescu <vdumitrescu@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/1752753970-261832-2-git-send-email-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-08-01net: ti: icssg-prueth: Fix buffer allocation for ICSSGHimanshu Mittal5-73/+190
[ Upstream commit 6e86fb73de0fe3ec5cdcd5873ad1d6005f295b64 ] Fixes overlapping buffer allocation for ICSSG peripheral used for storing packets to be received/transmitted. There are 3 buffers: 1. Buffer for Locally Injected Packets 2. Buffer for Forwarding Packets 3. Buffer for Host Egress Packets In existing allocation buffers for 2. and 3. are overlapping causing packet corruption. Packet corruption observations: During tcp iperf testing, due to overlapping buffers the received ack packet overwrites the packet to be transmitted. So, we see packets on wire with the ack packet content inside the content of next TCP packet from sender device. Details for AM64x switch mode: -> Allocation by existing driver: +---------+-------------------------------------------------------------+ | | SLICE 0 | SLICE 1 | | +------+--------------+--------+------+--------------+--------+ | | Slot | Base Address | Size | Slot | Base Address | Size | |---------+------+--------------+--------+------+--------------+--------+ | | 0 | 70000000 | 0x2000 | 0 | 70010000 | 0x2000 | | | 1 | 70002000 | 0x2000 | 1 | 70012000 | 0x2000 | | | 2 | 70004000 | 0x2000 | 2 | 70014000 | 0x2000 | | FWD | 3 | 70006000 | 0x2000 | 3 | 70016000 | 0x2000 | | Buffers | 4 | 70008000 | 0x2000 | 4 | 70018000 | 0x2000 | | | 5 | 7000A000 | 0x2000 | 5 | 7001A000 | 0x2000 | | | 6 | 7000C000 | 0x2000 | 6 | 7001C000 | 0x2000 | | | 7 | 7000E000 | 0x2000 | 7 | 7001E000 | 0x2000 | +---------+------+--------------+--------+------+--------------+--------+ | | 8 | 70020000 | 0x1000 | 8 | 70028000 | 0x1000 | | | 9 | 70021000 | 0x1000 | 9 | 70029000 | 0x1000 | | | 10 | 70022000 | 0x1000 | 10 | 7002A000 | 0x1000 | | Our | 11 | 70023000 | 0x1000 | 11 | 7002B000 | 0x1000 | | LI | 12 | 00000000 | 0x0 | 12 | 00000000 | 0x0 | | Buffers | 13 | 00000000 | 0x0 | 13 | 00000000 | 0x0 | | | 14 | 00000000 | 0x0 | 14 | 00000000 | 0x0 | | | 15 | 00000000 | 0x0 | 15 | 00000000 | 0x0 | +---------+------+--------------+--------+------+--------------+--------+ | | 16 | 70024000 | 0x1000 | 16 | 7002C000 | 0x1000 | | | 17 | 70025000 | 0x1000 | 17 | 7002D000 | 0x1000 | | | 18 | 70026000 | 0x1000 | 18 | 7002E000 | 0x1000 | | Their | 19 | 70027000 | 0x1000 | 19 | 7002F000 | 0x1000 | | LI | 20 | 00000000 | 0x0 | 20 | 00000000 | 0x0 | | Buffers | 21 | 00000000 | 0x0 | 21 | 00000000 | 0x0 | | | 22 | 00000000 | 0x0 | 22 | 00000000 | 0x0 | | | 23 | 00000000 | 0x0 | 23 | 00000000 | 0x0 | +---------+------+--------------+--------+------+--------------+--------+ --> here 16, 17, 18, 19 overlapping with below express buffer +-----+-----------------------------------------------+ | | SLICE 0 | SLICE 1 | | +------------+----------+------------+----------+ | | Start addr | End addr | Start addr | End addr | +-----+------------+----------+------------+----------+ | EXP | 70024000 | 70028000 | 7002C000 | 70030000 | <-- Overlapping | PRE | 70030000 | 70033800 | 70034000 | 70037800 | +-----+------------+----------+------------+----------+ +---------------------+----------+----------+ | | SLICE 0 | SLICE 1 | +---------------------+----------+----------+ | Default Drop Offset | 00000000 | 00000000 | <-- Field not configured +---------------------+----------+----------+ -> Allocation this patch brings: +---------+-------------------------------------------------------------+ | | SLICE 0 | SLICE 1 | | +------+--------------+--------+------+--------------+--------+ | | Slot | Base Address | Size | Slot | Base Address | Size | |---------+------+--------------+--------+------+--------------+--------+ | | 0 | 70000000 | 0x2000 | 0 | 70040000 | 0x2000 | | | 1 | 70002000 | 0x2000 | 1 | 70042000 | 0x2000 | | | 2 | 70004000 | 0x2000 | 2 | 70044000 | 0x2000 | | FWD | 3 | 70006000 | 0x2000 | 3 | 70046000 | 0x2000 | | Buffers | 4 | 70008000 | 0x2000 | 4 | 70048000 | 0x2000 | | | 5 | 7000A000 | 0x2000 | 5 | 7004A000 | 0x2000 | | | 6 | 7000C000 | 0x2000 | 6 | 7004C000 | 0x2000 | | | 7 | 7000E000 | 0x2000 | 7 | 7004E000 | 0x2000 | +---------+------+--------------+--------+------+--------------+--------+ | | 8 | 70010000 | 0x1000 | 8 | 70050000 | 0x1000 | | | 9 | 70011000 | 0x1000 | 9 | 70051000 | 0x1000 | | | 10 | 70012000 | 0x1000 | 10 | 70052000 | 0x1000 | | Our | 11 | 70013000 | 0x1000 | 11 | 70053000 | 0x1000 | | LI | 12 | 00000000 | 0x0 | 12 | 00000000 | 0x0 | | Buffers | 13 | 00000000 | 0x0 | 13 | 00000000 | 0x0 | | | 14 | 00000000 | 0x0 | 14 | 00000000 | 0x0 | | | 15 | 00000000 | 0x0 | 15 | 00000000 | 0x0 | +---------+------+--------------+--------+------+--------------+--------+ | | 16 | 70014000 | 0x1000 | 16 | 70054000 | 0x1000 | | | 17 | 70015000 | 0x1000 | 17 | 70055000 | 0x1000 | | | 18 | 70016000 | 0x1000 | 18 | 70056000 | 0x1000 | | Their | 19 | 70017000 | 0x1000 | 19 | 70057000 | 0x1000 | | LI | 20 | 00000000 | 0x0 | 20 | 00000000 | 0x0 | | Buffers | 21 | 00000000 | 0x0 | 21 | 00000000 | 0x0 | | | 22 | 00000000 | 0x0 | 22 | 00000000 | 0x0 | | | 23 | 00000000 | 0x0 | 23 | 00000000 | 0x0 | +---------+------+--------------+--------+------+--------------+--------+ +-----+-----------------------------------------------+ | | SLICE 0 | SLICE 1 | | +------------+----------+------------+----------+ | | Start addr | End addr | Start addr | End addr | +-----+------------+----------+------------+----------+ | EXP | 70018000 | 7001C000 | 70058000 | 7005C000 | | PRE | 7001C000 | 7001F800 | 7005C000 | 7005F800 | +-----+------------+----------+------------+----------+ +---------------------+----------+----------+ | | SLICE 0 | SLICE 1 | +---------------------+----------+----------+ | Default Drop Offset | 7001F800 | 7005F800 | +---------------------+----------+----------+ Rootcause: missing buffer configuration for Express frames in function: prueth_fw_offload_buffer_setup() Details: Driver implements two distinct buffer configuration functions that are invoked based on the driver state and ICSSG firmware:- - prueth_fw_offload_buffer_setup() - prueth_emac_buffer_setup() During initialization, driver creates standard network interfaces (netdevs) and configures buffers via prueth_emac_buffer_setup(). This function properly allocates and configures all required memory regions including: - LI buffers - Express packet buffers - Preemptible packet buffers However, when the driver transitions to an offload mode (switch/HSR/PRP), buffer reconfiguration is handled by prueth_fw_offload_buffer_setup(). This function does not reconfigure the buffer regions required for Express packets, leading to incorrect buffer allocation. Fixes: abd5576b9c57 ("net: ti: icssg-prueth: Add support for ICSSG switch firmware") Signed-off-by: Himanshu Mittal <h-mittal1@ti.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250717094220.546388-1-h-mittal1@ti.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-08-01virtio_net: Enforce minimum TX ring size for reliabilityLaurent Vivier1-0/+6
[ Upstream commit 24b2f5df86aaebbe7bac40304eaf5a146c02367c ] The `tx_may_stop()` logic stops TX queues if free descriptors (`sq->vq->num_free`) fall below the threshold of (`MAX_SKB_FRAGS` + 2). If the total ring size (`ring_num`) is not strictly greater than this value, queues can become persistently stopped or stop after minimal use, severely degrading performance. A single sk_buff transmission typically requires descriptors for: - The virtio_net_hdr (1 descriptor) - The sk_buff's linear data (head) (1 descriptor) - Paged fragments (up to MAX_SKB_FRAGS descriptors) This patch enforces that the TX ring size ('ring_num') must be strictly greater than (MAX_SKB_FRAGS + 2). This ensures that the ring is always large enough to hold at least one maximally-fragmented packet plus at least one additional slot. Reported-by: Lei Yang <leiyang@redhat.com> Signed-off-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Acked-by: Jason Wang <jasowang@redhat.com> Link: https://patch.msgid.link/20250521092236.661410-4-lvivier@redhat.com Tested-by: Lei Yang <leiyang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-07-24net: libwx: fix multicast packets received countJiawen Wu1-0/+2
commit 2b30a3d1ec2538a1fd363fde746b9fe1d38abc77 upstream. Multicast good packets received by PF rings that pass ethternet MAC address filtering are counted for rtnl_link_stats64.multicast. The counter is not cleared on read. Fix the duplicate counting on updating statistics. Fixes: 46b92e10d631 ("net: libwx: support hardware statistics") Cc: stable@vger.kernel.org Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/DA229A4F58B70E51+20250714015656.91772-1-jiawenwu@trustnetic.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-07-24virtio-net: fix recursived rtnl_lock() during probe()Zigit Zo1-1/+1
[ Upstream commit be5dcaed694e4255dc02dd0acfe036708c535def ] The deadlock appears in a stack trace like: virtnet_probe() rtnl_lock() virtio_config_changed_work() netdev_notify_peers() rtnl_lock() It happens if the VMM sends a VIRTIO_NET_S_ANNOUNCE request while the virtio-net driver is still probing. The config_work in probe() will get scheduled until virtnet_open() enables the config change notification via virtio_config_driver_enable(). Fixes: df28de7b0050 ("virtio-net: synchronize operstate with admin state on up/down") Signed-off-by: Zigit Zo <zuozhijie@bytedance.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Link: https://patch.msgid.link/20250716115717.1472430-1-zuozhijie@bytedance.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-07-24hv_netvsc: Set VF priv_flags to IFF_NO_ADDRCONF before open to prevent IPv6 ↵Li Tian1-1/+4
addrconf [ Upstream commit d7501e076d859d2f381d57bd984ff6db13172727 ] Set an additional flag IFF_NO_ADDRCONF to prevent ipv6 addrconf. Commit under Fixes added a new flag change that was not made to hv_netvsc resulting in the VF being assinged an IPv6. Fixes: 8a321cf7becc ("net: add IFF_NO_ADDRCONF and use it in bonding to prevent ipv6 addrconf") Suggested-by: Cathy Avery <cavery@redhat.com> Signed-off-by: Li Tian <litian@redhat.com> Reviewed-by: Xin Long <lucien.xin@gmail.com> Link: https://patch.msgid.link/20250716002607.4927-1-litian@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-07-24net: airoha: fix potential use-after-free in airoha_npu_get()Alok Tiwari1-1/+2
[ Upstream commit 3cd582e7d0787506990ef0180405eb6224fa90a6 ] np->name was being used after calling of_node_put(np), which releases the node and can lead to a use-after-free bug. Previously, of_node_put(np) was called unconditionally after of_find_device_by_node(np), which could result in a use-after-free if pdev is NULL. This patch moves of_node_put(np) after the error check to ensure the node is only released after both the error and success cases are handled appropriately, preventing potential resource issues. Fixes: 23290c7bc190 ("net: airoha: Introduce Airoha NPU support") Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20250715143102.3458286-1-alok.a.tiwari@oracle.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-07-24net/mlx5: Correctly set gso_size when LRO is usedChristoph Paasch1-4/+8
[ Upstream commit 531d0d32de3e1b6b77a87bd37de0c2c6e17b496a ] gso_size is expected by the networking stack to be the size of the payload (thus, not including ethernet/IP/TCP-headers). However, cqe_bcnt is the full sized frame (including the headers). Dividing cqe_bcnt by lro_num_seg will then give incorrect results. For example, running a bpftrace higher up in the TCP-stack (tcp_event_data_recv), we commonly have gso_size set to 1450 or 1451 even though in reality the payload was only 1448 bytes. This can have unintended consequences: - In tcp_measure_rcv_mss() len will be for example 1450, but. rcv_mss will be 1448 (because tp->advmss is 1448). Thus, we will always recompute scaling_ratio each time an LRO-packet is received. - In tcp_gro_receive(), it will interfere with the decision whether or not to flush and thus potentially result in less gro'ed packets. So, we need to discount the protocol headers from cqe_bcnt so we can actually divide the payload by lro_num_seg to get the real gso_size. v2: - Use "(unsigned char *)tcp + tcp->doff * 4 - skb->data)" to compute header-len (Tariq Toukan <tariqt@nvidia.com>) - Improve commit-message (Gal Pressman <gal@nvidia.com>) Fixes: e586b3b0baee ("net/mlx5: Ethernet Datapath files") Signed-off-by: Christoph Paasch <cpaasch@openai.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Gal Pressman <gal@nvidia.com> Link: https://patch.msgid.link/20250715-cpaasch-pf-925-investigate-incorrect-gso_size-on-cx-7-nic-v2-1-e06c3475f3ac@openai.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-07-24usb: net: sierra: check for no status endpointOliver Neukum1-0/+4
[ Upstream commit 4c4ca3c46167518f8534ed70f6e3b4bf86c4d158 ] The driver checks for having three endpoints and having bulk in and out endpoints, but not that the third endpoint is interrupt input. Rectify the omission. Reported-by: syzbot+3f89ec3d1d0842e95d50@syzkaller.appspotmail.com Closes: https://lore.kernel.org/linux-usb/686d5a9f.050a0220.1ffab7.0017.GAE@google.com/ Tested-by: syzbot+3f89ec3d1d0842e95d50@syzkaller.appspotmail.com Fixes: eb4fd8cd355c8 ("net/usb: add sierra_net.c driver") Signed-off-by: Oliver Neukum <oneukum@suse.com> Link: https://patch.msgid.link/20250714111326.258378-1-oneukum@suse.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-07-24ice: check correct pointer in fwlog debugfsMichal Swiatkowski1-1/+1
[ Upstream commit bedd0330a19b3a4448e67941732153ce04d3fb9b ] pf->ice_debugfs_pf_fwlog should be checked for an error here. Fixes: 96a9a9341cda ("ice: configure FW logging") Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-07-24ice: add NULL check in eswitch lag checkDave Ertman1-1/+2
[ Upstream commit 3ce58b01ada408b372f15b7c992ed0519840e3cf ] The function ice_lag_is_switchdev_running() is being called from outside of the LAG event handler code. This results in the lag->upper_netdev being NULL sometimes. To avoid a NULL-pointer dereference, there needs to be a check before it is dereferenced. Fixes: 776fe19953b0 ("ice: block default rule setting on LAG interface") Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-07-24can: tcan4x5x: fix reset gpio usage during probeBrett Werling1-20/+41
[ Upstream commit 0f97a7588db7a545ea07ee0d512789bfad4931d8 ] Fixes reset GPIO usage during probe by ensuring we retrieve the GPIO and take the device out of reset (if it defaults to being in reset) before we attempt to communicate with the device. This is achieved by moving the call to tcan4x5x_get_gpios() before tcan4x5x_find_version() and avoiding any device communication while getting the GPIOs. Once we determine the version, we can then take the knowledge of which GPIOs we obtained and use it to decide whether we need to disable the wake or state pin functions within the device. This change is necessary in a situation where the reset GPIO is pulled high externally before the CPU takes control of it, meaning we need to explicitly bring the device out of reset before we can start communicating with it at all. This also has the effect of fixing an issue where a reset of the device would occur after having called tcan4x5x_disable_wake(), making the original behavior not actually disable the wake. This patch should now disable wake or state pin functions well after the reset occurs. Signed-off-by: Brett Werling <brett.werling@garmin.com> Link: https://patch.msgid.link/20250711141728.1826073-1-brett.werling@garmin.com Cc: Markus Schneider-Pargmann <msp@baylibre.com> Fixes: 142c6dc6d9d7 ("can: tcan4x5x: Add support for tcan4552/4553") Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-07-24net: phy: Don't register LEDs for genphySean Anderson1-2/+4
[ Upstream commit f0f2b992d8185a0366be951685e08643aae17d6d ] If a PHY has no driver, the genphy driver is probed/removed directly in phy_attach/detach. If the PHY's ofnode has an "leds" subnode, then the LEDs will be (un)registered when probing/removing the genphy driver. This could occur if the leds are for a non-generic driver that isn't loaded for whatever reason. Synchronously removing the PHY device in phy_detach leads to the following deadlock: rtnl_lock() ndo_close() ... phy_detach() phy_remove() phy_leds_unregister() led_classdev_unregister() led_trigger_set() netdev_trigger_deactivate() unregister_netdevice_notifier() rtnl_lock() There is a corresponding deadlock on the open/register side of things (and that one is reported by lockdep), but it requires a race while this one is deterministic. Generic PHYs do not support LEDs anyway, so don't bother registering them. Fixes: 01e5b728e9e4 ("net: phy: Add a binding for PHY LEDs") Signed-off-by: Sean Anderson <sean.anderson@linux.dev> Link: https://patch.msgid.link/20250707195803.666097-1-sean.anderson@linux.dev Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-07-24net: emaclite: Fix missing pointer increment in aligned_read()Alok Tiwari1-1/+1
[ Upstream commit 7727ec1523d7973defa1dff8f9c0aad288d04008 ] Add missing post-increment operators for byte pointers in the loop that copies remaining bytes in xemaclite_aligned_read(). Without the increment, the same byte was written repeatedly to the destination. This update aligns with xemaclite_aligned_write() Fixes: bb81b2ddfa19 ("net: add Xilinx emac lite device driver") Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com> Link: https://patch.msgid.link/20250710173849.2381003-1-alok.a.tiwari@oracle.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-07-24wifi: iwlwifi: mask reserved bits in chan_state_active_bitmapPagadala Yesu Anjaneyulu3-3/+7
[ Upstream commit 5fde0fcbd7608dd5f97a5c0c23a316074d6f17f5 ] Mask the reserved bits as firmware will assert if reserved bits are set. Fixes: ef7ddf4e2f94 ("wifi: iwlwifi: Add support for LARI_CONFIG_CHANGE_CMD v12") Signed-off-by: Pagadala Yesu Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250709065608.7a72c70bdc9d.Ic9be0a3fc3aabde0c4b88568f3bb7b76e375f8d4@changeid Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-07-24net: libwx: properly reset Rx ring descriptorJiawen Wu2-4/+8
commit d992ed7e1b687ad7df0763d3e015a5358646210b upstream. When device reset is triggered by feature changes such as toggling Rx VLAN offload, wx->do_reset() is called to reinitialize Rx rings. The hardware descriptor ring may retain stale values from previous sessions. And only set the length to 0 in rx_desc[0] would result in building malformed SKBs. Fix it to ensure a clean slate after device reset. [ 549.186435] [ C16] ------------[ cut here ]------------ [ 549.186457] [ C16] kernel BUG at net/core/skbuff.c:2814! [ 549.186468] [ C16] Oops: invalid opcode: 0000 [#1] SMP NOPTI [ 549.186472] [ C16] CPU: 16 UID: 0 PID: 0 Comm: swapper/16 Kdump: loaded Not tainted 6.16.0-rc4+ #23 PREEMPT(voluntary) [ 549.186476] [ C16] Hardware name: Micro-Star International Co., Ltd. MS-7E16/X670E GAMING PLUS WIFI (MS-7E16), BIOS 1.90 12/31/2024 [ 549.186478] [ C16] RIP: 0010:__pskb_pull_tail+0x3ff/0x510 [ 549.186484] [ C16] Code: 06 f0 ff 4f 34 74 7b 4d 8b 8c 24 c8 00 00 00 45 8b 84 24 c0 00 00 00 e9 c8 fd ff ff 48 c7 44 24 08 00 00 00 00 e9 5e fe ff ff <0f> 0b 31 c0 e9 23 90 5b ff 41 f7 c6 ff 0f 00 00 75 bf 49 8b 06 a8 [ 549.186487] [ C16] RSP: 0018:ffffb391c0640d70 EFLAGS: 00010282 [ 549.186490] [ C16] RAX: 00000000fffffff2 RBX: ffff8fe7e4d40200 RCX: 00000000fffffff2 [ 549.186492] [ C16] RDX: ffff8fe7c3a4bf8e RSI: 0000000000000180 RDI: ffff8fe7c3a4bf40 [ 549.186494] [ C16] RBP: ffffb391c0640da8 R08: ffff8fe7c3a4c0c0 R09: 000000000000000e [ 549.186496] [ C16] R10: ffffb391c0640d88 R11: 000000000000000e R12: ffff8fe7e4d40200 [ 549.186497] [ C16] R13: 00000000fffffff2 R14: ffff8fe7fa01a000 R15: 00000000fffffff2 [ 549.186499] [ C16] FS: 0000000000000000(0000) GS:ffff8fef5ae40000(0000) knlGS:0000000000000000 [ 549.186502] [ C16] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 549.186503] [ C16] CR2: 00007f77d81d6000 CR3: 000000051a032000 CR4: 0000000000750ef0 [ 549.186505] [ C16] PKRU: 55555554 [ 549.186507] [ C16] Call Trace: [ 549.186510] [ C16] <IRQ> [ 549.186513] [ C16] ? srso_alias_return_thunk+0x5/0xfbef5 [ 549.186517] [ C16] __skb_pad+0xc7/0xf0 [ 549.186523] [ C16] wx_clean_rx_irq+0x355/0x3b0 [libwx] [ 549.186533] [ C16] wx_poll+0x92/0x120 [libwx] [ 549.186540] [ C16] __napi_poll+0x28/0x190 [ 549.186544] [ C16] net_rx_action+0x301/0x3f0 [ 549.186548] [ C16] ? srso_alias_return_thunk+0x5/0xfbef5 [ 549.186551] [ C16] ? __raw_spin_lock_irqsave+0x1e/0x50 [ 549.186554] [ C16] ? srso_alias_return_thunk+0x5/0xfbef5 [ 549.186557] [ C16] ? wake_up_nohz_cpu+0x35/0x160 [ 549.186559] [ C16] ? srso_alias_return_thunk+0x5/0xfbef5 [ 549.186563] [ C16] handle_softirqs+0xf9/0x2c0 [ 549.186568] [ C16] __irq_exit_rcu+0xc7/0x130 [ 549.186572] [ C16] common_interrupt+0xb8/0xd0 [ 549.186576] [ C16] </IRQ> [ 549.186577] [ C16] <TASK> [ 549.186579] [ C16] asm_common_interrupt+0x22/0x40 [ 549.186582] [ C16] RIP: 0010:cpuidle_enter_state+0xc2/0x420 [ 549.186585] [ C16] Code: 00 00 e8 11 0e 5e ff e8 ac f0 ff ff 49 89 c5 0f 1f 44 00 00 31 ff e8 0d ed 5c ff 45 84 ff 0f 85 40 02 00 00 fb 0f 1f 44 00 00 <45> 85 f6 0f 88 84 01 00 00 49 63 d6 48 8d 04 52 48 8d 04 82 49 8d [ 549.186587] [ C16] RSP: 0018:ffffb391c0277e78 EFLAGS: 00000246 [ 549.186590] [ C16] RAX: ffff8fef5ae40000 RBX: 0000000000000003 RCX: 0000000000000000 [ 549.186591] [ C16] RDX: 0000007fde0faac5 RSI: ffffffff826e53f6 RDI: ffffffff826fa9b3 [ 549.186593] [ C16] RBP: ffff8fe7c3a20800 R08: 0000000000000002 R09: 0000000000000000 [ 549.186595] [ C16] R10: 0000000000000000 R11: 000000000000ffff R12: ffffffff82ed7a40 [ 549.186596] [ C16] R13: 0000007fde0faac5 R14: 0000000000000003 R15: 0000000000000000 [ 549.186601] [ C16] ? cpuidle_enter_state+0xb3/0x420 [ 549.186605] [ C16] cpuidle_enter+0x29/0x40 [ 549.186609] [ C16] cpuidle_idle_call+0xfd/0x170 [ 549.186613] [ C16] do_idle+0x7a/0xc0 [ 549.186616] [ C16] cpu_startup_entry+0x25/0x30 [ 549.186618] [ C16] start_secondary+0x117/0x140 [ 549.186623] [ C16] common_startup_64+0x13e/0x148 [ 549.186628] [ C16] </TASK> Fixes: 3c47e8ae113a ("net: libwx: Support to receive packets in NAPI") Cc: stable@vger.kernel.org Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250714024755.17512-4-jiawenwu@trustnetic.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-07-24net: libwx: fix the using of Rx buffer DMAJiawen Wu2-3/+2
commit 5fd77cc6bd9b368431a815a780e407b7781bcca0 upstream. The wx_rx_buffer structure contained two DMA address fields: 'dma' and 'page_dma'. However, only 'page_dma' was actually initialized and used to program the Rx descriptor. But 'dma' was uninitialized and used in some paths. This could lead to undefined behavior, including DMA errors or use-after-free, if the uninitialized 'dma' was used. Althrough such error has not yet occurred, it is worth fixing in the code. Fixes: 3c47e8ae113a ("net: libwx: Support to receive packets in NAPI") Cc: stable@vger.kernel.org Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250714024755.17512-3-jiawenwu@trustnetic.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-07-24net: libwx: remove duplicate page_pool_put_full_page()Jiawen Wu2-12/+0
commit 1b7e585c04cd5f0731dd25ffd396277e55fae0e6 upstream. page_pool_put_full_page() should only be invoked when freeing Rx buffers or building a skb if the size is too short. At other times, the pages need to be reused. So remove the redundant page put. In the original code, double free pages cause kernel panic: [ 876.949834] __irq_exit_rcu+0xc7/0x130 [ 876.949836] common_interrupt+0xb8/0xd0 [ 876.949838] </IRQ> [ 876.949838] <TASK> [ 876.949840] asm_common_interrupt+0x22/0x40 [ 876.949841] RIP: 0010:cpuidle_enter_state+0xc2/0x420 [ 876.949843] Code: 00 00 e8 d1 1d 5e ff e8 ac f0 ff ff 49 89 c5 0f 1f 44 00 00 31 ff e8 cd fc 5c ff 45 84 ff 0f 85 40 02 00 00 fb 0f 1f 44 00 00 <45> 85 f6 0f 88 84 01 00 00 49 63 d6 48 8d 04 52 48 8d 04 82 49 8d [ 876.949844] RSP: 0018:ffffaa7340267e78 EFLAGS: 00000246 [ 876.949845] RAX: ffff9e3f135be000 RBX: 0000000000000002 RCX: 0000000000000000 [ 876.949846] RDX: 000000cc2dc4cb7c RSI: ffffffff89ee49ae RDI: ffffffff89ef9f9e [ 876.949847] RBP: ffff9e378f940800 R08: 0000000000000002 R09: 00000000000000ed [ 876.949848] R10: 000000000000afc8 R11: ffff9e3e9e5a9b6c R12: ffffffff8a6d8580 [ 876.949849] R13: 000000cc2dc4cb7c R14: 0000000000000002 R15: 0000000000000000 [ 876.949852] ? cpuidle_enter_state+0xb3/0x420 [ 876.949855] cpuidle_enter+0x29/0x40 [ 876.949857] cpuidle_idle_call+0xfd/0x170 [ 876.949859] do_idle+0x7a/0xc0 [ 876.949861] cpu_startup_entry+0x25/0x30 [ 876.949862] start_secondary+0x117/0x140 [ 876.949864] common_startup_64+0x13e/0x148 [ 876.949867] </TASK> [ 876.949868] ---[ end trace 0000000000000000 ]--- [ 876.949869] ------------[ cut here ]------------ [ 876.949870] list_del corruption, ffffead40445a348->next is NULL [ 876.949873] WARNING: CPU: 14 PID: 0 at lib/list_debug.c:52 __list_del_entry_valid_or_report+0x67/0x120 [ 876.949875] Modules linked in: snd_hrtimer(E) bnep(E) binfmt_misc(E) amdgpu(E) squashfs(E) vfat(E) loop(E) fat(E) amd_atl(E) snd_hda_codec_realtek(E) intel_rapl_msr(E) snd_hda_codec_generic(E) intel_rapl_common(E) snd_hda_scodec_component(E) snd_hda_codec_hdmi(E) snd_hda_intel(E) edac_mce_amd(E) snd_intel_dspcfg(E) snd_hda_codec(E) snd_hda_core(E) amdxcp(E) kvm_amd(E) snd_hwdep(E) gpu_sched(E) drm_panel_backlight_quirks(E) cec(E) snd_pcm(E) drm_buddy(E) snd_seq_dummy(E) drm_ttm_helper(E) btusb(E) kvm(E) snd_seq_oss(E) btrtl(E) ttm(E) btintel(E) snd_seq_midi(E) btbcm(E) drm_exec(E) snd_seq_midi_event(E) i2c_algo_bit(E) snd_rawmidi(E) bluetooth(E) drm_suballoc_helper(E) irqbypass(E) snd_seq(E) ghash_clmulni_intel(E) sha512_ssse3(E) drm_display_helper(E) aesni_intel(E) snd_seq_device(E) rfkill(E) snd_timer(E) gf128mul(E) drm_client_lib(E) drm_kms_helper(E) snd(E) i2c_piix4(E) joydev(E) soundcore(E) wmi_bmof(E) ccp(E) k10temp(E) i2c_smbus(E) gpio_amdpt(E) i2c_designware_platform(E) gpio_generic(E) sg(E) [ 876.949914] i2c_designware_core(E) sch_fq_codel(E) parport_pc(E) drm(E) ppdev(E) lp(E) parport(E) fuse(E) nfnetlink(E) ip_tables(E) ext4 crc16 mbcache jbd2 sd_mod sfp mdio_i2c i2c_core txgbe ahci n