| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
[ Upstream commit 0bb05e6adfa99a2ea1fee1125cc0953409f83ed8 ]
The CPU receives frames from the MAC through conventional DMA: the CPU
allocates buffers for the MAC, then the MAC fills them and returns
ownership to the CPU. For each hardware RX queue, the CPU and MAC
coordinate through a shared ring array of DMA descriptors: one
descriptor per DMA buffer. Each descriptor includes the buffer's
physical address and a status flag ("OWN") indicating which side owns
the buffer: OWN=0 for CPU, OWN=1 for MAC. The CPU is only allowed to set
the flag and the MAC is only allowed to clear it, and both must move
through the ring in sequence: thus the ring is used for both
"submissions" and "completions."
In the stmmac driver, stmmac_rx() bookmarks its position in the ring
with the `cur_rx` index. The main receive loop in that function checks
for rx_descs[cur_rx].own=0, gives the corresponding buffer to the
network stack (NULLing the pointer), and increments `cur_rx` modulo the
ring size. After the loop exits, stmmac_rx_refill(), which bookmarks its
position with `dirty_rx`, allocates fresh buffers and rearms the
descriptors (setting OWN=1). If it fails any allocation, it simply stops
early (leaving OWN=0) and will retry where it left off when next called.
This means descriptors have a three-stage lifecycle (terms my own):
- `empty` (OWN=1, buffer valid)
- `full` (OWN=0, buffer valid and populated)
- `dirty` (OWN=0, buffer NULL)
But because stmmac_rx() only checks OWN, it confuses `full`/`dirty`. In
the past (see 'Fixes:'), there was a bug where the loop could cycle
`cur_rx` all the way back to the first descriptor it dirtied, resulting
in a NULL dereference when mistaken for `full`. The aforementioned
commit resolved that *specific* failure by capping the loop's iteration
limit at `dma_rx_size - 1`, but this is only a partial fix: if the
previous stmmac_rx_refill() didn't complete, then there are leftover
`dirty` descriptors that the loop might encounter without needing to
cycle fully around. The current code therefore panics (see 'Closes:')
when stmmac_rx_refill() is memory-starved long enough for `cur_rx` to
catch up to `dirty_rx`.
Fix this by explicitly checking, before advancing `cur_rx`, if the next
entry is dirty; exit the loop if so. This prevents processing of the
final, used descriptor until stmmac_rx_refill() succeeds, but
fully prevents the `cur_rx == dirty_rx` ambiguity as the previous bugfix
intended: so remove the clamp as well. Since stmmac_rx_zc() is a
copy-paste-and-tweak of stmmac_rx() and the code structure is identical,
any fix to stmmac_rx() will also need a corresponding fix for
stmmac_rx_zc(). Therefore, apply the same check there.
In stmmac_rx() (not stmmac_rx_zc()), a related bug remains: after the
MAC sets OWN=0 on the final descriptor, it will be unable to send any
further DMA-complete IRQs until it's given more `empty` descriptors.
Currently, the driver simply *hopes* that the next stmmac_rx_refill()
succeeds, risking an indefinite stall of the receive process if not. But
this is not a regression, so it can be addressed in a future change.
Fixes: b6cb4541853c7 ("net: stmmac: avoid rx queue overrun")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=221010
Cc: stable@vger.kernel.org
Suggested-by: Russell King <linux@armlinux.org.uk>
Signed-off-by: Sam Edwards <CFSworks@gmail.com>
Link: https://patch.msgid.link/20260422044503.5349-1-CFSworks@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 6b4286e0550814cdc4b897f881ec1fa8b0313227 ]
STMMAC_GET_ENTRY() doesn't describe what this macro is doing - it is
incrementing the provided index for the circular array of descriptors.
Replace "GET" with "NEXT" as this better describes the action here.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1w2vba-0000000DbWo-1oL5@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 0bb05e6adfa9 ("net: stmmac: Prevent NULL deref when RX memory exhausted")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit dd66b42854705e4e4ee7f14d260f86c578bed3e3 ]
napi_build_skb() can return NULL on allocation failure. In
__octep_vf_oq_process_rx(), the result is used directly without a NULL
check in both the single-buffer and multi-fragment paths, leading to a
NULL pointer dereference.
Add NULL checks after both napi_build_skb() calls, properly advancing
descriptors and consuming remaining fragments on failure.
Fixes: 1cd3b407977c ("octeon_ep_vf: add Tx/Rx processing and interrupt support")
Cc: stable@vger.kernel.org
Signed-off-by: David Carlier <devnexen@gmail.com>
Link: https://patch.msgid.link/20260409184009.930359-3-devnexen@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[ inlined missing octep_vf_oq_next_idx() helper as read_idx++ with wraparound ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c9341307ea16b9395c2e4c9c94d8499d91fe31d0 upstream.
Sashiko points out the radix_tree itself is RCU safe, but nothing ever
frees the mlx4_srq struct with RCU, and it isn't even accessed within the
RCU critical section. It also will crash if an event is delivered before
the srq object is finished initializing.
Use the spinlock since it isn't easy to make RCU work, use
refcount_inc_not_zero() to protect against partially initialized objects,
and order the refcount_set() to be after the srq is fully initialized.
Cc: stable@vger.kernel.org
Fixes: 30353bfc43a1 ("net/mlx4_core: Use RCU to perform radix tree lookup for SRQ")
Link: https://sashiko.dev/#/patchset/0-v2-1c49eeb88c48%2B91-rdma_udata_rep_jgg%40nvidia.com?part=5
Link: https://patch.msgid.link/r/12-v1-41f3135e5565+9d2-rdma_ai_fixes1_jgg@nvidia.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 9aab1c3d7299285e2569cbc0ed5892d631a241b2 upstream.
When auxiliary_device_add() fails, ice_sf_eth_activate() jumps to
aux_dev_uninit and calls auxiliary_device_uninit(&sf_dev->adev).
The device release callback ice_sf_dev_release() frees sf_dev, but
the current error path falls through to sf_dev_free and calls
kfree(sf_dev) again, causing a double free.
Keep kfree(sf_dev) for the auxiliary_device_init() failure path, but
avoid falling through to sf_dev_free after auxiliary_device_uninit().
Fixes: 13acc5c4cdbe ("ice: subfunction activation and base devlink ops")
Cc: stable@vger.kernel.org
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260416-iwl-net-submission-2026-04-14-v2-3-686c33c9828d@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit cc427d24ac6442ffdeafd157a63c7c5b73ed4de4 upstream.
Some physical adapters on Power systems do not support segmentation
offload when the MSS is less than 224 bytes. Attempting to send such
packets causes the adapter to freeze, stopping all traffic until
manually reset.
Implement ndo_features_check to disable GSO for packets with small MSS
values. The network stack will perform software segmentation instead.
The 224-byte minimum matches ibmvnic
commit <f10b09ef687f> ("ibmvnic: Enforce stronger sanity checks
on GSO packets")
which uses the same physical adapters in SEA configurations.
The issue occurs specifically when the hardware attempts to perform
segmentation (gso_segs > 1) with a small MSS. Single-segment GSO packets
(gso_segs == 1) do not trigger the problematic LSO code path and are
transmitted normally without segmentation.
Add an ndo_features_check callback to disable GSO when MSS < 224 bytes.
Also call vlan_features_check() to ensure proper handling of VLAN packets,
particularly QinQ (802.1ad) configurations where the hardware parser may
not support certain offload features.
Validated using iptables to force small MSS values. Without the fix,
the adapter freezes. With the fix, packets are segmented in software
and transmission succeeds. Comprehensive regression testing completedd
(MSS tests, performance, stability).
Fixes: 8641dd85799f ("ibmveth: Add support for TSO")
Cc: stable@vger.kernel.org
Reviewed-by: Brian King <bjking1@linux.ibm.com>
Tested-by: Shaik Abdulla <shaik.abdulla1@ibm.com>
Tested-by: Naveed Ahmed <naveedaus@in.ibm.com>
Signed-off-by: Mingming Cao <mmc@linux.ibm.com>
Link: https://patch.msgid.link/20260424162917.65725-1-mmc@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
t7xx_port_enum_msg_handler
commit 0e7c074cfcd9bd93765505f9eb8b42f03ed2a744 upstream.
t7xx_port_enum_msg_handler() uses the modem-supplied port_count field as
a loop bound over port_msg->data[] without checking that the message buffer
contains sufficient data. A modem sending port_count=65535 in a 12-byte
buffer triggers a slab-out-of-bounds read of up to 262140 bytes.
Add a sizeof(*port_msg) check before accessing the port message header
fields to guard against undersized messages.
Add a struct_size() check after extracting port_count and before the loop.
In t7xx_parse_host_rt_data(), guard the rt_feature header read with a
remaining-buffer check before accessing data_len, validate feat_data_len
against the actual remaining buffer to prevent OOB reads and signed
integer overflow on offset.
Pass msg_len from both call sites: skb->len at the DPMAIF path after
skb_pull(), and the validated feat_data_len at the handshake path.
Fixes: da45d2566a1d ("net: wwan: t7xx: Add control port")
Cc: stable@vger.kernel.org
Signed-off-by: Pavitra Jha <jhapavitra98@gmail.com>
Link: https://patch.msgid.link/20260501110713.145563-1-jhapavitra98@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7a33345153eeeda195c55f15be27074e4c3b5109 upstream.
Currently, request_threaded_irq() is used with a primary handler but a
NULL threaded handler, while also setting the IRQF_ONESHOT flag. This
specific combination triggers a WARNING since the commit aef30c8d569c
("genirq: Warn about using IRQF_ONESHOT without a threaded handler").
WARNING: kernel/irq/manage.c:1502 at __setup_irq+0x4fa/0x760
Fix the issue by switching to request_irq(), which is the appropriate
interface or a non-threaded interrupt handler, and removing the
unnecessary IRQF_ONESHOT flag.
Fixes: eb4898fde1de ("net: libwx: add wangxun vf common api")
Cc: stable@vger.kernel.org
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Link: https://patch.msgid.link/786DDC7D5CCA6D0A+20260429083743.88961-2-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 694de316f607fe2473d52ca0707e3918e72c1562 upstream.
Register WX_CFG_PORT_ST is a PF restricted register. When a VF is
initialized, attempting to read this register triggers an illegal
register access, which lead to a system hang.
When the device is VF, the bus function ID can be obtained directly from
the PCI_FUNC(pdev->devfn).
Fixes: a04ea57aae37 ("net: libwx: fix device bus LAN ID")
Cc: stable@vger.kernel.org
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Link: https://patch.msgid.link/4D1F4452D21DE107+20260429083743.88961-1-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c623b63580880cc742255eaed3d79804c1b91143 upstream.
Watchdog task might end between send_sig() and kthread_stop() calls, what
results in the use-after-free issue. Fix this by increasing watchdog task
reference count before calling send_sig() and dropping it by switching to
kthread_stop_put().
Cc: stable@vger.kernel.org
Fixes: 373c83a801f1 ("brcmfmac: stop watchdog before detach and free everything")
Fixes: a9ffda88be74 ("brcm80211: fmac: abstract bus_stop interface function pointer")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Link: https://patch.msgid.link/20260416093339.2066829-1-m.szyprowski@samsung.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1f4f78bf8549e6ac4f04fba4176854f3a6e0c332 upstream.
The firmware-controlled key index in b43_rx() can exceed the dev->key[]
array size (58 entries). The existing B43_WARN_ON is non-enforcing in
production builds, allowing an out-of-bounds read.
Make the B43_WARN_ON check enforcing by dropping the frame when the
firmware returns an invalid key index.
Suggested-by: Jonas Gorski <jonas.gorski@gmail.com>
Acked-by: Michael Büsch <m@bues.ch>
Fixes: e4d6b7951812 ("[B43]: add mac80211-based driver for modern BCM43xx devices")
Cc: stable@vger.kernel.org
Signed-off-by: Tristan Madani <tristan@talencesecurity.com>
Link: https://patch.msgid.link/20260417111145.2694196-1-tristmd@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d748603f12baff112caa3ab7d39f50100f010dbd upstream.
Vincent reports:
> The ath5k driver seems to do an array-index-out-of-bounds access as
> shown by the UBSAN kernel message:
> UBSAN: array-index-out-of-bounds in drivers/net/wireless/ath/ath5k/base.c:1741:20
> index 4 is out of range for type 'ieee80211_tx_rate [4]'
> ...
> Call Trace:
> <TASK>
> dump_stack_lvl+0x5d/0x80
> ubsan_epilogue+0x5/0x2b
> __ubsan_handle_out_of_bounds.cold+0x46/0x4b
> ath5k_tasklet_tx+0x4e0/0x560 [ath5k]
> tasklet_action_common+0xb5/0x1c0
It is real. 'ts->ts_final_idx' can be 3 on 5212, so:
info->status.rates[ts->ts_final_idx + 1].idx = -1;
with the array defined as:
struct ieee80211_tx_rate rates[IEEE80211_TX_MAX_RATES];
while the size is:
#define IEEE80211_TX_MAX_RATES 4
is indeed bogus.
Set this 'idx = -1' sentinel only if the array index is less than the
array size. As mac80211 will not look at rates beyond the size
(IEEE80211_TX_MAX_RATES).
Note: The effect of the OOB write is negligible. It just overwrites the
next member of info->status, i.e. ack_signal.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Reported-by: Vincent Danjean <vdanjean@debian.org>
Link: https://lore.kernel.org/all/aQYUkIaT87ccDCin@eldamar.lan
Closes: https://bugs.debian.org/1119093
Fixes: 6d7b97b23e11 ("ath5k: fix tx status reporting issues")
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20251209100459.2253198-1-jirislaby@kernel.org
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit db57a1aa54ff68669781976e4edb045e09e2b65b upstream.
RSI driver use both self-exit(kthread_complete_and_exit) and external-stop
(kthread_stop) when killing a kthread. Generally, kthread_stop() is called
first, and in this case, no particular issues occur.
However, in rare instances where kthread_complete_and_exit() is called
first and then kthread_stop() is called, a UAF occurs because the kthread
object, which has already exited and been freed, is accessed again.
Therefore, to prevent this with minimal modification, you must remove
kthread_stop() and change the code to wait until the self-exit operation
is completed.
Cc: <stable@vger.kernel.org>
Reported-by: syzbot+5de83f57cd8531f55596@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/69e5d03b.a00a0220.1bd0ca.0064.GAE@google.com/
Fixes: 4c62764d0fc2 ("rsi: improve kernel thread handling to fix kernel panic")
Signed-off-by: Jeongjun Park <aha310510@gmail.com>
Link: https://patch.msgid.link/20260422173846.37640-1-aha310510@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a035766f970bde2d4298346a31a80685be5c0205 upstream.
Same fix as b43: the firmware-controlled key index in b43legacy_rx()
can exceed dev->max_nr_keys. The existing B43legacy_WARN_ON is
non-enforcing in production builds, allowing an out-of-bounds read of
dev->key[].
Make the check enforcing by dropping the frame for invalid indices.
Fixes: 75388acd0cd8 ("[B43LEGACY]: add mac80211-based driver for legacy BCM43xx devices")
Cc: stable@vger.kernel.org
Signed-off-by: Tristan Madani <tristan@talencesecurity.com>
Link: https://patch.msgid.link/20260417111145.2694196-2-tristmd@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit fdfa39f9f4fbae532b162da913a67b2410caf38f upstream.
The mt7921_set_roc API may be executed concurrently with mt7921_roc_work,
specifically between the following code paths:
- The check and clear of MT76_STATE_ROC in mt7921_roc_work:
if (!test_and_clear_bit(MT76_STATE_ROC, &phy->mt76->state))
return;
- The execution of ieee80211_iterate_active_interfaces.
This race condition can interrupt the ROC abort flow, resulting in
the ROC process failing to abort as expected.
To address this defect, the modification of MT76_STATE_ROC is now
protected by mt792x_mutex_acquire(phy->dev). This ensures that
changes to the ROC state are properly synchronized, preventing
race conditions and ensuring the ROC abort flow is not interrupted.
Fixes: 034ae28b56f1 ("wifi: mt76: mt7921: introduce remain_on_channel support")
Cc: stable@vger.kernel.org
Signed-off-by: Quan Zhou <quan.zhou@mediatek.com>
Reviewed-by: Sean Wang <sean.wang@mediatek.com>
Link: https://patch.msgid.link/2568ece8b557e5dda79391414c834ef3233049b6.1769133724.git.quan.zhou@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5373f8b19e568b5c217832b9bbef165bd2b2df14 upstream.
The buf_len is used to limit the iterations for retrieving the country
power setting and may underflow under certain conditions due to changes
in the power table in CLC.
This underflow leads to an almost infinite loop or an invalid power
setting resulting in driver initialization failure.
Cc: stable@vger.kernel.org
Fixes: fa6ad88e023d ("wifi: mt76: mt7921: fix country count limitation for CLC")
Signed-off-by: Leon Yen <leon.yen@mediatek.com>
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Link: https://patch.msgid.link/20251009020158.1923429-1-mingyen.hsieh@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ccb186326bb6b7f20d77982f855568e7087ad0d7 upstream.
Set `tx_power_tlv->len` to `msg_len` instead of `sizeof(*tx_power_tlv)`
to ensure the correct message length is sent to firmware.
Cc: stable@vger.kernel.org
Fixes: c948b5da6bbe ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips")
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Link: https://patch.msgid.link/20250908072526.1833938-1-mingyen.hsieh@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit bb8e38fcdbf7290d7f0cd572d2d8fdb2b641b492 upstream.
Previously, the AMPDU state bit for a given TID was set before attempting
to start a BA session, which could result in the AMPDU state being marked
active even if ieee80211_start_tx_ba_session() failed. This patch changes
the logic to only set the AMPDU state bit after successfully starting a BA
session, ensuring proper synchronization between AMPDU state and BA session
status.
This fixes potential issues with aggregation state tracking and improves
compatibility with mac80211 BA session management.
Fixes: 44eb173bdd4f ("wifi: mt76: mt7925: add link handling in mt7925_txwi_free")
Cc: stable@vger.kernel.org
Signed-off-by: Quan Zhou <quan.zhou@mediatek.com>
Reviewed-by: Sean Wang <sean.wang@mediatek.com>
Link: https://patch.msgid.link/d5960fbced0beaf33c30203f7f8fb91d0899c87b.1764228973.git.quan.zhou@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c171e679ee66d7c0e2b58db9531af96797a76bca upstream.
On the Renesas RZ/V2H EVK platform, where the stmmac MAC is connected to a
Microchip KSZ9131RNXI PHY, creating or deleting VLAN interfaces may fail
with timeouts:
# ip link add link end1 name end1.5 type vlan id 5
15c40000.ethernet end1: Timeout accessing MAC_VLAN_Tag_Filter
RTNETLINK answers: Device or resource busy
Disabling EEE at runtime avoids the problem:
# ethtool --set-eee end1 eee off
# ip link add link end1 name end1.5 type vlan id 5
# ip link del end1.5
The stmmac hardware requires the receive clock to be running when writing
certain registers, such as those used for MAC address configuration or
VLAN filtering. However, by default the driver enables Energy Efficient
Ethernet (EEE) and allows the PHY to stop the receive clock when the link
is idle. As a result, the RX clock might be stopped when attempting to
access these registers, leading to timeouts and other issues.
Commit dd557266cf5fb ("net: stmmac: block PHY RXC clock-stop")
addressed this issue for most register accesses by wrapping them in
phylink_rx_clk_stop_block()/phylink_rx_clk_stop_unblock() calls.
However, VLAN add/delete operations may be invoked with bottom halves
disabled, where sleeping is not allowed, so using these helpers is not
possible.
Therefore, to fix this, disable the RX clock stop feature in the phylink
configuration if VLAN features are set. This ensures the RX clock remains
active and register accesses succeed during VLAN operations.
Signed-off-by: Ovidiu Panait <ovidiu.panait.rb@renesas.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/20251113112721.70500-3-ovidiu.panait.rb@renesas.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 62e037aa8cf5a69b7ea63336705a35c897b9db2b upstream.
The previous implementation of __mt7925_mcu_set_clc() set the TLV length
field (.len) incorrectly during CLC command construction. The length was
initialized as sizeof(req) - 4, regardless of the actual segment length.
This could cause the WiFi firmware to misinterpret the command payload,
resulting in command execution errors.
This patch moves the TLV length assignment to after the segment is
selected, and sets .len to sizeof(req) + seg->len - 4, matching the
actual command content. This ensures the firmware receives the
correct TLV length and parses the command properly.
Fixes: c948b5da6bbe ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips")
Cc: stable@vger.kernel.org
Signed-off-by: Quan Zhou <quan.zhou@mediatek.com>
Acked-by: Sean Wang <sean.wang@mediatek.com>
Link: https://patch.msgid.link/f56ae0e705774dfa8aab3b99e5bbdc92cd93523e.1772011204.git.quan.zhou@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 56154fef47d104effa9f29ed3db4f805cbc0d640 ]
mt7925u uses different reset/status registers from mt7921u. Reusing the
mt7921u register set causes the WFSYS reset to fail.
Add a chip-specific descriptor in mt792xu_wfsys_reset() to select the
correct registers and fix mt7925u failing to initialize after a warm
reboot.
Fixes: d28e1a48952e ("wifi: mt76: mt792x: introduce mt792x-usb module")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Link: https://patch.msgid.link/20260311002825.15502-2-sean.wang@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit e6f48512c1ceebcd1ce6bb83df3b3d56a261507d ]
Prepare mt792xu_wfsys_reset() for chips that share the same USB WFSYS
reset flow but use different register definitions.
This is a pure refactor of the current mt7921u path and keeps the reset
sequence unchanged.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Link: https://patch.msgid.link/20260311002825.15502-1-sean.wang@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Stable-dep-of: 56154fef47d1 ("wifi: mt76: mt792x: fix mt7925u USB WFSYS reset handling")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5638504a2aa9e1b9d72af9060df1a160cce2d379 upstream.
gtp_genl_send_echo_req() runs as a generic netlink doit handler in
process context with BH not disabled. It calls udp_tunnel_xmit_skb(),
which eventually invokes iptunnel_xmit() — that uses __this_cpu_inc/dec
on softnet_data.xmit.recursion to track the tunnel xmit recursion level.
Without local_bh_disable(), the task may migrate between
dev_xmit_recursion_inc() and dev_xmit_recursion_dec(), breaking the
per-CPU counter pairing. The result is stale or negative recursion
levels that can later produce false-positive
SKB_DROP_REASON_RECURSION_LIMIT drops on either CPU.
The other udp_tunnel_xmit_skb() call sites in gtp.c are unaffected:
the data path runs under ndo_start_xmit and the echo response handlers
run from the UDP encap rx softirq, both with BH already disabled.
Fix it by disabling BH around the udp_tunnel_xmit_skb() call, mirroring
commit 2cd7e6971fc2 ("sctp: disable BH before calling
udp_tunnel_xmit_skb()").
Fixes: 6f1a9140ecda ("net: add xmit recursion limit to tunnel xmit functions")
Cc: stable@vger.kernel.org
Signed-off-by: David Carlier <devnexen@gmail.com>
Link: https://patch.msgid.link/20260417055408.4667-1-devnexen@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit fed4626501c871890da287bec62a96e52da1af89 upstream.
USB drivers bind to USB interfaces and any device managed resources
should have their lifetime tied to the interface rather than parent USB
device. This avoids issues like memory leaks when drivers are unbound
without their devices being physically disconnected (e.g. on probe
deferral or configuration changes).
Fix the control message buffer lifetime so that it is released on driver
unbind.
Fixes: 9f2d3eae88d2 ("can: ucan: add driver for Theobroma Systems UCAN devices")
Cc: stable@vger.kernel.org # 4.19
Cc: Jakob Unterwurzacher <jakob.unterwurzacher@theobroma-systems.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260327104520.1310158-1-johan@kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f8a2fc809bfeb49130709b31a4d357a049f28547 upstream.
The local variables 'mcs' and 'nss' in rtl8xxxu_update_ra_report() are
passed to rtl8xxxu_desc_to_mcsrate() as output parameters. If the helper
function encounters an unhandled rate index, it may return without setting
these values, leading to the use of uninitialized stack data.
Remove the helper rtl8xxxu_desc_to_mcsrate() and inline the logic into
rtl8xxxu_update_ra_report(). This fixes the use of uninitialized 'mcs'
and 'nss' variables for legacy rates.
The new implementation explicitly handles:
- Legacy rates: Set bitrate only.
- HT rates (MCS0-15): Set MCS flags, index, and NSS (1 or 2) directly.
- Invalid rates: Return early.
Fixes: 7de16123d9e2 ("wifi: rtl8xxxu: Introduce rtl8xxxu_update_ra_report")
Cc: stable@vger.kernel.org
Suggested-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Yi Cong <yicong@kylinos.cn>
Link: https://lore.kernel.org/all/96e31963da0c42dcb52ce44f818963d7@realtek.com/
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260306071627.56501-1-cong.yi@linux.dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 22230e68b2cf1ab6b027be8cf1198164a949c4fa upstream.
The code injects a packet into netif_rx() repeatedly, which will add
it to its internal NAPI and schedule a softirq, and process it. It is
more efficient to queue multiple packets and process them all at the
local_bh_enable() time.
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Fixes: e0863634bf9f ("net: ks8851: Queue RX packets in IRQ handler instead of disabling BHs")
Cc: stable@vger.kernel.org
Signed-off-by: Marek Vasut <marex@nabladev.com>
Link: https://patch.msgid.link/20260415231020.455298-2-marex@nabladev.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7079c8c13f2d33992bc846240517d88f4ab07781 upstream.
trim_newline() unconditionally dereferences s[len - 1] after computing
len = strnlen(s, maxlen). When the string is empty, len is 0 and the
expression underflows to s[(size_t)-1], reading (and potentially
writing) one byte before the buffer.
The two callers feed trim_newline() with the result of strscpy() from
configfs store callbacks (dev_name_store, userdatum_value_store).
configfs guarantees count >= 1 reaches the callback, but the byte
itself can be NUL: a userspace write(fd, "\0", 1) leaves the
destination empty after strscpy() and triggers the underflow. The OOB
write only fires if the adjacent byte happens to be '\n', so this is
not a security issue, but the access is undefined behaviour either way.
This pattern is commonly flagged by LLM-based code reviewers. While it
is not a security fix, the underlying access is undefined behaviour and
the change is small and self-contained, so it is a reasonable candidate
for the stable trees.
Guard the dereference on a non-zero length.
Fixes: ae001dc67907 ("net: netconsole: move newline trimming to function")
Cc: stable@vger.kernel.org
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Gustavo Luiz Duarte <gustavold@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260420-netcons_trim_newline-v1-1-dc35889aeedf@debian.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5c9fcac3c872224316714d0d8914d9af16c76a6d upstream.
If the driver executes ks8851_irq() AND a TX packet has been sent, then
the driver enables TX queue via netif_wake_queue() which schedules TX
softirq to queue packets for this device.
If CONFIG_PREEMPT_RT=y is set AND a packet has also been received by
the MAC, then ks8851_rx_pkts() calls netdev_alloc_skb_ip_align() to
allocate SKBs for the received packets. If netdev_alloc_skb_ip_align()
is called with BH enabled, then local_bh_enable() at the end of
netdev_alloc_skb_ip_align() will trigger the pending softirq processing,
which may ultimately call the .xmit callback ks8851_start_xmit_par().
The ks8851_start_xmit_par() will try to lock struct ks8851_net_par
.lock spinlock, which is already locked by ks8851_irq() from which
ks8851_start_xmit_par() was called. This leads to a deadlock, which
is reported by the kernel, including a trace listed below.
If CONFIG_PREEMPT_RT is not set, then since commit 0913ec336a6c0
("net: ks8851: Fix deadlock with the SPI chip variant") the deadlock
can also be triggered without received packet in the RX FIFO. The
pending softirqs will be processed on return from
spin_unlock_bh(&ks->statelock) in ks8851_irq(), which triggers the
deadlock as well.
Fix the problem by disabling BH around critical sections, including the
IRQ handler, thus preventing the net_tx_action() softirq from triggering
during these critical sections. The net_tx_action() softirq is triggered
once BH are re-enabled and at the end of the IRQ handler, once all the
other IRQ handler actions have been completed.
__schedule from schedule_rtlock+0x1c/0x34
schedule_rtlock from rtlock_slowlock_locked+0x548/0x904
rtlock_slowlock_locked from rt_spin_lock+0x60/0x9c
rt_spin_lock from ks8851_start_xmit_par+0x74/0x1a8
ks8851_start_xmit_par from netdev_start_xmit+0x20/0x44
netdev_start_xmit from dev_hard_start_xmit+0xd0/0x188
dev_hard_start_xmit from sch_direct_xmit+0xb8/0x25c
sch_direct_xmit from __qdisc_run+0x1f8/0x4ec
__qdisc_run from qdisc_run+0x1c/0x28
qdisc_run from net_tx_action+0x1f0/0x268
net_tx_action from handle_softirqs+0x1a4/0x270
handle_softirqs from __local_bh_enable_ip+0xcc/0xe0
__local_bh_enable_ip from __alloc_skb+0xd8/0x128
__alloc_skb from __netdev_alloc_skb+0x3c/0x19c
__netdev_alloc_skb from ks8851_irq+0x388/0x4d4
ks8851_irq from irq_thread_fn+0x24/0x64
irq_thread_fn from irq_thread+0x178/0x28c
irq_thread from kthread+0x12c/0x138
kthread from ret_from_fork+0x14/0x28
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Fixes: e0863634bf9f ("net: ks8851: Queue RX packets in IRQ handler instead of disabling BHs")
Cc: stable@vger.kernel.org
Signed-off-by: Marek Vasut <marex@nabladev.com>
Link: https://patch.msgid.link/20260415231020.455298-1-marex@nabladev.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c263f644add3d6ad81f9d62a99284fde408f0caa upstream.
For the device SP, the firmware version is a 32-bit value where the
lower 20 bits represent the base version number. And the customized
firmware version populates the upper 12 bits with a specific
identification number.
For other devices AML 25G and 40G, the upper 12 bits of the firmware
version is always non-zero, and they have other naming conventions.
Only SP devices need to check this to tell if XPCS will work properly.
So the judgement of MAC type is added here.
And the original logic compared the entire 32-bit value against 0x20010,
which caused the outdated base firmwares bypass the version check
without a warning. Apply a mask 0xfffff to isolate the lower 20 bits for
an accurate base version comparison.
Fixes: ab928c24e6cd ("net: txgbe: add FW version warning")
Cc: stable@vger.kernel.org
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/C787AA5C07598B13+20260422071837.372731-1-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e159f05e12cc1111a3103b99375ddf0dfd0e7d63 upstream.
For the copper NIC with external PHY, the driver called
phylink_connect_phy() during probe and phylink_disconnect_phy() during
remove. It caused an RTNL assertion warning in phylink_disconnect_phy()
upon module remove.
To fix this, add rtnl_lock() and rtnl_unlock() around the
phylink_disconnect_phy() in remove function.
------------[ cut here ]------------
RTNL: assertion failed at drivers/net/phy/phylink.c (2351)
WARNING: drivers/net/phy/phylink.c:2351 at
phylink_disconnect_phy+0xd8/0xf0 [phylink], CPU#0: rmmod/4464
Modules linked in: ...
CPU: 0 UID: 0 PID: 4464 Comm: rmmod Kdump: loaded Not tainted 7.0.0-rc4+
Hardware name: Micro-Star International Co., Ltd. MS-7E16/X670E GAMING
PLUS WIFI (MS-7E16), BIOS 1.90 12/31/2024
RIP: 0010:phylink_disconnect_phy+0xe4/0xf0 [phylink]
Code: 5b 41 5c 41 5d 41 5e 41 5f 5d 31 c0 31 d2 31 f6 31 ff e9 3a 38 8f e7
48 8d 3d 48 87 e2 ff ba 2f 09 00 00 48 c7 c6 c1 22 24 c0 <67> 48 0f b9 3a
e9 34 ff ff ff 66 90 90 90 90 90 90 90 90 90 90 90
RSP: 0018:ffffce7288363ac0 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff89654b2a1a00 RCX: 0000000000000000
RDX: 000000000000092f RSI: ffffffffc02422c1 RDI: ffffffffc0239020
RBP: ffffce7288363ae8 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffff8964c4022000
R13: ffff89654fce3028 R14: ffff89654ebb4000 R15: ffffffffc0226348
FS: 0000795e80d93780(0000) GS:ffff896c52857000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00005b528b592000 CR3: 0000000170d0f000 CR4: 0000000000f50ef0
PKRU: 55555554
Call Trace:
<TASK>
txgbe_remove_phy+0xbb/0xd0 [txgbe]
txgbe_remove+0x4c/0xb0 [txgbe]
pci_device_remove+0x41/0xb0
device_remove+0x43/0x80
device_release_driver_internal+0x206/0x270
driver_detach+0x4a/0xa0
bus_remove_driver+0x83/0x120
driver_unregister+0x2f/0x60
pci_unregister_driver+0x40/0x90
txgbe_driver_exit+0x10/0x850 [txgbe]
__do_sys_delete_module.isra.0+0x1c3/0x2f0
__x64_sys_delete_module+0x12/0x20
x64_sys_call+0x20c3/0x2390
do_syscall_64+0x11c/0x1500
? srso_alias_return_thunk+0x5/0xfbef5
? do_syscall_64+0x15a/0x1500
? srso_alias_return_thunk+0x5/0xfbef5
? do_fault+0x312/0x580
? srso_alias_return_thunk+0x5/0xfbef5
? __handle_mm_fault+0x9d5/0x1040
? srso_alias_return_thunk+0x5/0xfbef5
? count_memcg_events+0x101/0x1d0
? srso_alias_return_thunk+0x5/0xfbef5
? handle_mm_fault+0x1e8/0x2f0
? srso_alias_return_thunk+0x5/0xfbef5
? do_user_addr_fault+0x2f8/0x820
? srso_alias_return_thunk+0x5/0xfbef5
? irqentry_exit+0xb2/0x600
? srso_alias_return_thunk+0x5/0xfbef5
? exc_page_fault+0x92/0x1c0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Fixes: 02b2a6f91b90 ("net: txgbe: support copper NIC with external PHY")
Cc: stable@vger.kernel.org
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/8B47A5872884147D+20260407094041.4646-1-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit dbeb256e8dd87233d891b170c0b32a6466467036 upstream.
When an RSS QP is destroyed (e.g. DPDK exit), mana_ib_destroy_qp_rss()
destroys the RX WQ objects but does not disable vPort RX steering in
firmware. This leaves stale steering configuration that still points to
the destroyed RX objects.
If traffic continues to arrive (e.g. peer VM is still transmitting) and
the VF interface is subsequently brought up (mana_open), the firmware
may deliver completions using stale CQ IDs from the old RX objects.
These CQ IDs can be reused by the ethernet driver for new TX CQs,
causing RX completions to land on TX CQs:
WARNING: mana_poll_tx_cq+0x1b8/0x220 [mana] (is_sq == false)
WARNING: mana_gd_process_eq_events+0x209/0x290 (cq_table lookup fails)
Fix this by disabling vPort RX steering before destroying RX WQ objects.
Note that mana_fence_rqs() cannot be used here because the fence
completion is delivered on the CQ, which is polled by user-mode (e.g.
DPDK) and not visible to the kernel driver.
Refactor the disable logic into a shared mana_disable_vport_rx() in
mana_en, exported for use by mana_ib, replacing the duplicate code.
The ethernet driver's mana_dealloc_queues() is also updated to call
this common function.
Fixes: 0266a177631d ("RDMA/mana_ib: Add a driver for Microsoft Azure Network Adapter")
Cc: stable@vger.kernel.org
Signed-off-by: Long Li <longli@microsoft.com>
Link: https://patch.msgid.link/20260325194100.1929056-1-longli@microsoft.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ae5e95d4157481693be2317e3ffcd84e36010cbb upstream.
The mwifiex_adapter_cleanup() function uses timer_delete()
(non-synchronous) for the wakeup_timer before the adapter structure is
freed. This is incorrect because timer_delete() does not wait for any
running timer callback to complete.
If the wakeup_timer callback (wakeup_timer_fn) is executing when
mwifiex_adapter_cleanup() is called, the callback will continue to
access adapter fields (adapter->hw_status, adapter->if_ops.card_reset,
etc.) which may be freed by mwifiex_free_adapter() called later in the
mwifiex_remove_card() path.
Use timer_delete_sync() instead to ensure any running timer callback has
completed before returning.
Fixes: 4636187da60b ("mwifiex: add wakeup timer based recovery mechanism")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Hodges <git@danielhodges.dev>
Link: https://patch.msgid.link/20260206194401.2346-1-git@danielhodges.dev
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit eb101d2abdcccb514ca4fccd3b278dd8267374f6 upstream.
pci_upstream_bridge() returns NULL if the device is on a root bus. If
8821CE is installed in the system with such a PCI topology, the probing
routine will crash. This has probably been unnoticed as 8821CE is mostly
supplied in laptops where there is a PCI-to-PCI bridge located upstream
from the device. However the card might be installed on a system with
different configuration.
Check if the bridge does exist for the specific workaround to be applied.
Found by Linux Verification Center (linuxtesting.org) with Svace static
analysis tool.
Fixes: 24f5e38a13b5 ("rtw88: Disable PCIe ASPM while doing NAPI poll on 8821CE")
Cc: stable@vger.kernel.org
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260220094730.49791-1-pchelkin@ispras.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f72e77c33e4b5657af35125e75bab249256030f3 upstream.
In various places in the kernel, we modify the fwnode "flags" member
by doing either:
fwnode->flags |= SOME_FLAG;
fwnode->flags &= ~SOME_FLAG;
This type of modification is not thread-safe. If two threads are both
mucking with the flags at the same time then one can clobber the
other.
While flags are often modified while under the "fwnode_link_lock",
this is not universally true.
Create some accessor functions for setting, clearing, and testing the
FWNODE flags and move all users to these accessor functions. New
accessor functions use set_bit() and clear_bit(), which are
thread-safe.
Cc: stable@vger.kernel.org
Fixes: c2c724c868c4 ("driver core: Add fw_devlink_parse_fwtree()")
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Rafael J. Wysocki (Intel) <rafael@kernel.org>
Reviewed-by: Saravana Kannan <saravanak@kernel.org>
Link: https://patch.msgid.link/20260317090112.v2.1.I0a4d03104ecd5103df3d76f66c8d21b1d15a2e38@changeid
[ Fix fwnode_clear_flag() argument alignment, restore dropped blank
line in fwnode_dev_initialized(), and remove unnecessary parentheses
around fwnode_test_flag() calls. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2dddb34dd0d07b01fa770eca89480a4da4f13153 upstream.
The PPE enforces output frame size limits via per-tag-layer VLAN_MTU
registers that the driver never initializes. The hardware defaults do
not account for PPPoE overhead, causing the PPE to punt encapsulated
frames back to the CPU instead of forwarding them.
Initialize the registers at PPE start and on MTU changes using the
maximum GMAC MTU. This is a conservative approximation -- the actual
per-PPE requirement depends on egress path, but using the global
maximum ensures the limits are never too small.
Fixes: ba37b7caf1ed2 ("net: ethernet: mtk_eth_soc: add support for initializing the P |
