summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2013-06-13cxgb4: Do not set net_device::dev_id to VI indexBen Hutchings1-1/+0
net_device::dev_id should not be used merely to indicate a VI index, as it affects the way the local part of IPv6 addresses is normally generated. This field was intended for use where multiple devices may share a single assigned MAC address and need to have different IPv6 addresses. T4 VIs each have their own MAC address. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Acked-by: Dimitris Michailidis <dm@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-13macvtap: fix uninitialized return value macvtap_ioctl_set_queue()Jason Wang1-0/+2
Return -EINVAL on illegal flag instead of uninitialized value. This fixes the kbuild test warning. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-13macvtap: slient sparse warningsJason Wang1-1/+1
This patch silents the following sparse warnings: drivers/net/macvtap.c:98:9: warning: incorrect type in assignment (different address spaces) drivers/net/macvtap.c:98:9: expected struct macvtap_queue *<noident> drivers/net/macvtap.c:98:9: got struct macvtap_queue [noderef] <asn:4>*<noident> drivers/net/macvtap.c:120:9: warning: incorrect type in assignment (different address spaces) drivers/net/macvtap.c:120:9: expected struct macvtap_queue *<noident> drivers/net/macvtap.c:120:9: got struct macvtap_queue [noderef] <asn:4>*<noident> drivers/net/macvtap.c:151:22: error: incompatible types in comparison expression (different address spaces) drivers/net/macvtap.c:233:23: error: incompatible types in comparison expression (different address spaces) drivers/net/macvtap.c:243:23: error: incompatible types in comparison expression (different address spaces) drivers/net/macvtap.c:247:15: error: incompatible types in comparison expression (different address spaces) CC [M] drivers/net/macvtap.o drivers/net/macvlan.c:232:24: error: incompatible types in comparison expression (different address spaces) Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-13macvlan: don't touch promisc without passthroughMichael S. Tsirkin1-7/+13
commit df8ef8f3aaa6692970a436204c4429210addb23a "macvlan: add FDB bridge ops and macvlan flags" added a way to control NOPROMISC macvlan flag through netlink. However, with a non passthrough device we never set promisc on open, even if NOPROMISC is off. As a result: If userspace clears NOPROMISC on open, then does not clear it on a netlink command, promisc counter is not decremented on stop and there will be no way to clear it once macvlan is detached. If userspace does not clear NOPROMISC on open, then sets NOPROMISC on a netlink command, promisc counter will be decremented from 0 and overflow to fffffffff with no way to clear promisc. To fix, simply ignore NOPROMISC flag in a netlink command for non-passthrough devices, same as we do at open/close. Since we touch this code anyway - check dev_set_promiscuity return code and pass it to users (though an error here is unlikely). Cc: "David S. Miller" <davem@davemloft.net> Reviewed-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-12tun: Turn tun_flow_init() into void fnPavel Emelyanov1-7/+2
This routine doesn't fail since 9fdc6bef (tuntap: dont use a private kmem_cache) so it makes sense to compact the code a little bit. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-12tun: Report "persist" flag to userspacePavel Emelyanov1-0/+3
The TUN_PERSIST flag is not reported at all -- both TUNGETIFF, and sysfs "flags" attribute skip one. Knowing whether a device is persistent or not is critical for checkpoint-restore, thus I propose to add the read-only IFF_PERSIST one for this. Setting this new IFF_PERSIST is hardly possible, as TUNSETIFF doesn't check for unknown flags being zero and thus there can be trash. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-12Merge branch 'for-davem' of ↵David S. Miller160-2038/+18875
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next John W. Linville says: ==================== This pull request is intended for the 3.11 stream... One big highlight is the cw1200 driver the ST-E CW1100 & CW1200 WLAN chipsets. This one has been lingering for a while, lacking some review comments. Once started getting pulled into linux-next, it got a bit more attention and a number of improvements were made over the initial cut. No doubt there will be more changes ahead, but I think it is looking alright at this point. Along with that, there is the usual flurry of updates to the mac80211 core and the iwlwifi, mwifiex, ath9k, rt2x00, wil6210, and other drivers. A few of the highlights are some rt2x00 refactoring/cleanup by Gabor Juhos, some rt2800 hardware support enhancements by Stanislaw Gruszka, some iwlwifi power management updates from Alexander Bondar, some enhanced bcma SPROM support from Rafał Miłecki, and a variety of other things here and there. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-12sh_eth: split 'sh_eth_netdev_ops'Sergei Shtylyov1-9/+20
Commit 9f86134155047720a3685cda21467f68695152d2 (sh_eth: remove SH_ETH_HAS_TSU) removes 'const' from 'sh_eth_netdev_ops' and modifies it in case TSU registers are present. I've originally suggested to Iwamatsu-san to split this structure in two instead and afterwards Dave M. suggested doing the same. Split 'sh_eth_netdev_ops_tsu' from 'sh_eth_netdev_ops', making both 'const', and assigning 'ndev->detdev_ops' depending on the presence of TSU registers. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-12Merge branch 'for-john' of ↵John W. Linville5-3/+7
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-fixes
2013-06-12rt2800: fix RT5390 & RT3290 TX power settings regressionStanislaw Gruszka1-11/+18
My change: commit cee2c7315f60beeff6137ee59e99acc77d636eeb Author: Stanislaw Gruszka <sgruszka@redhat.com> Date: Fri Oct 5 13:44:09 2012 +0200 rt2800: use BBP_R1 for setting tx power unfortunately does not work well with RT5390 and RT3290 chips as they require different temperature compensation TX power settings (TSSI tuning). Since that commit make wireless connection very unstable on those chips, restore previous behavior to fix regression. Once we implement proper TSSI tuning on 5390/3290 we can restore back setting TX power by BBP_R1 register for those chips. Reported-and-tested-by: Mike Romberg <mike-romberg@comcast.net> Cc: stable@vger.kernel.org Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-12brcmsmac: disable power-save related functionsArend van Spriel1-15/+2
This patch fixes a regression introduced by: commit 6da3b6c48d79da96a36c2632053cf4f53bf48fb2 Author: Hauke Mehrtens <hauke@hauke-m.de> Date: Sun Mar 24 01:45:52 2013 +0100 brcmsmac: remove brcms_bss_cfg->associated The regression behaviour was described on mailing list. http://mid.gmane.org/5197DC4F.7030503@broadcom.com: "On laptop I installed kernel with brcmsmac compiled as module. It comes up and associates during boot, but after logging in there is no connectivity. Triggering reassoc gives connectivity for some time, but after a while (1-2 min) it stops." Before the mentioned commit the return value of the function brcms_c_ps_allowed() was always false, which is desired behaviour as power-save is not supported at the moment. Therefor, the function is changed to just return false instead of simply reverting the mentioned commit. Bug: 58471 <https://bugzilla.kernel.org/show_bug.cgi?id=58471> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-12iwlegacy: fix rate control regressionStanislaw Gruszka2-1/+2
Since driver does not use control.rates[0].count, we have never set that variable. But currently, after rate control API rewrite, this is required by mac80211. Otherwise legacy rates control does not work and we transmit always at 1Mbit/s on pre 11n networks. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-12Merge branch 'master' of ↵John W. Linville19-71/+181
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
2013-06-12b43: stop format string leaking into error msgsKees Cook1-1/+1
The module parameter "fwpostfix" is userspace controllable, unfiltered, and is used to define the firmware filename. b43_do_request_fw() populates ctx->errors[] on error, containing the firmware filename. b43err() parses its arguments as a format string. For systems with b43 hardware, this could lead to a uid-0 to ring-0 escalation. CVE-2013-2852 Signed-off-by: Kees Cook <keescook@chromium.org> Cc: stable@vger.kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-12ath9k: Use minstrel rate control by defaultSujith Manoharan4-9/+9
The ath9k rate control algorithm has various architectural issues that make it a poor fit in scenarios like congested environments etc. An example: https://bugzilla.redhat.com/show_bug.cgi?id=927191 Change the default to minstrel which is more robust in such cases. The ath9k RC code is left in the driver for now, maybe it can be removed altogether later on. Cc: stable@vger.kernel.org Cc: Jouni Malinen <jouni@qca.qualcomm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-12Revert "ath9k_hw: Update rx gain initval to improve rx sensitivity"Felix Fietkau1-5/+5
This reverts commit 68d9e1fa24d9c7c2e527f49df8d18fb8cf0ec943 This change reduces rx sensitivity with no apparent extra benefit. It looks like it was meant for testing in a specific scenario, but it was never properly validated. Cc: rmanohar@qca.qualcomm.com Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-12ath9k: Disable PowerSave by defaultSujith Manoharan1-2/+1
Almost all the DMA issues which have plagued ath9k (in station mode) for years are related to PS. Disabling PS usually "fixes" the user's connection stablility. Reports of DMA problems are still trickling in and are sitting in the kernel bugzilla. Until the PS code in ath9k is given a thorough review, disbale it by default. The slight increase in chip power consumption is a small price to pay for improved link stability. Cc: stable@vger.kernel.org Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-12net: wireless: iwlegacy: fix build error for il_pm_opsYijing Wang1-3/+3
Fix build error for il_pm_ops if CONFIG_PM is set but CONFIG_PM_SLEEP is not set. ERROR: "il_pm_ops" [drivers/net/wireless/iwlegacy/iwl4965.ko] undefined! ERROR: "il_pm_ops" [drivers/net/wireless/iwlegacy/iwl3945.ko] undefined! make[1]: *** [__modpost] Error 1 make: *** [modules] Error 2 Signed-off-by: Yijing Wang <wangyijing@huawei.com> Cc: Stanislaw Gruszka <sgruszka@redhat.com> Cc: "John W. Linville" <linville@tuxdriver.com> Cc: netdev@vger.kernel.org Cc: linux-wireless@vger.kernel.org Cc: Jingoo Han <jg1.han@samsung.com> Acked-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-12rtlwifi: Fix a false leak indication for PCI devicesLarry Finger1-0/+1
This false leak indication is avoided with a no-leak annotation to kmemleak. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-12wl12xx/wl18xx: scan all 5ghz channelsEliad Peller2-2/+2
Due to a typo, the current code copies only sizeof(cmd->channels_2) bytes, which is smaller than the correct sizeof(cmd->channels_5) size, resulting in a partial scan (some channels are skipped). Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-12wl12xx: increase minimum singlerole firmware version requiredLuciano Coelho1-2/+2
The minimum firmware version required for singlerole after recent driver changes is 6/7.3.10.0.133. Reported-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Luciano Coelho <coelho@ti.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-12wl12xx: fix minimum required firmware version for wl127x multiroleLuciano Coelho1-1/+1
There was a typo in commit 8675f9 (wlcore/wl12xx/wl18xx: verify multi-role and single-role fw versions), which was causing the multirole firmware for wl127x (WiLink6) to be rejected. The actual minimum version needed for wl127x multirole is 6.5.7.0.42. Reported-by: Levi Pearson <levipearson@gmail.com> Reported-by: Michael Scott <hashcode0f@gmail.com> Cc: stable@kernel.org # 3.9+ Signed-off-by: Luciano Coelho <coelho@ti.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-12rtlwifi: rtl8192cu: Fix problem in connecting to WEP or WPA(1) networksLarry Finger7-41/+139
Driver rtl8192cu can connect to WPA2 networks, but fails for any other encryption method. The cause is a failure to set the rate control data blocks. These changes fix https://bugzilla.redhat.com/show_bug.cgi?id=952793 and https://bugzilla.redhat.com/show_bug.cgi?id=761525. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-12mwifiex: debugfs: Fix out of bounds array accessMark A. Greer1-5/+17
When reading the contents of '/sys/kernel/debug/mwifiex/p2p0/info', the following panic occurs: $ cat /sys/kernel/debug/mwifiex/p2p0/info Unable to handle kernel paging request at virtual address 74706164 pgd = de530000 [74706164] *pgd=00000000 Internal error: Oops: 5 [#1] SMP ARM Modules linked in: phy_twl4030_usb omap2430 musb_hdrc mwifiex_sdio mwifiex CPU: 0 PID: 1635 Comm: cat Not tainted 3.10.0-rc1-00010-g1268390 #1 task: de16b6c0 ti: de048000 task.ti: de048000 PC is at strnlen+0xc/0x4c LR is at string+0x3c/0xf8 pc : [<c02c123c>] lr : [<c02c2d1c>] psr: a0000013 sp : de049e10 ip : c06efba0 fp : de6d2092 r10: bf01a260 r9 : ffffffff r8 : 74706164 r7 : 0000ffff r6 : ffffffff r5 : de6d209c r4 : 00000000 r3 : ff0a0004 r2 : 74706164 r1 : ffffffff r0 : 74706164 Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user Control: 10c5387d Table: 9e530019 DAC: 00000015 Process cat (pid: 1635, stack limit = 0xde048240) Stack: (0xde049e10 to 0xde04a000) 9e00: de6d2092 00000002 bf01a25e de6d209c 9e20: de049e80 c02c438c 0000000a ff0a0004 ffffffff 00000000 00000000 de049e48 9e40: 00000000 2192df6d ff0a0004 ffffffff 00000000 de6d2092 de049ef8 bef3cc00 9e60: de6b0000 dc358000 de6d2000 00000000 00000003 c02c45a4 bf01790c bf01a254 9e80: 74706164 bf018698 00000000 de59c3c0 de048000 de049f80 00001000 bef3cc00 9ea0: 00000008 00000000 00000000 00000000 00000000 00000000 00000000 00000000 9ec0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 9ee0: 00000000 00000000 00000000 00000001 00000000 00000000 6669776d 20786569 9f00: 20302e31 2e343128 392e3636 3231702e 00202933 00000000 00000003 c0294898 9f20: 00000000 00000000 00000000 00000000 de59c3c0 c0107c04 de554000 de59c3c0 9f40: 00001000 bef3cc00 de049f80 bef3cc00 de049f80 00000000 00000003 c0108a00 9f60: de048000 de59c3c0 00000000 00000000 de59c3c0 00001000 bef3cc00 c0108b60 9f80: 00000000 00000000 00001000 bef3cc00 00000003 00000003 c0014128 de048000 9fa0: 00000000 c0013f80 00001000 bef3cc00 00000003 bef3cc00 00001000 00000000 9fc0: 00001000 bef3cc00 00000003 00000003 00000001 00000001 00000001 00000003 9fe0: 00000000 bef3cbdc 00011984 b6f1127c 60000010 00000003 18dbdd2c 7f7bfffd [<c02c123c>] (strnlen+0xc/0x4c) from [<c02c2d1c>] (string+0x3c/0xf8) [<c02c2d1c>] (string+0x3c/0xf8) from [<c02c438c>] (vsnprintf+0x1e8/0x3e8) [<c02c438c>] (vsnprintf+0x1e8/0x3e8) from [<c02c45a4>] (sprintf+0x18/0x24) [<c02c45a4>] (sprintf+0x18/0x24) from [<bf01790c>] (mwifiex_info_read+0xfc/0x3e8 [mwifiex]) [<bf01790c>] (mwifiex_info_read+0xfc/0x3e8 [mwifiex]) from [<c0108a00>] (vfs_read+0xb0/0x144) [<c0108a00>] (vfs_read+0xb0/0x144) from [<c0108b60>] (SyS_read+0x44/0x70) [<c0108b60>] (SyS_read+0x44/0x70) from [<c0013f80>] (ret_fast_syscall+0x0/0x30) Code: e12fff1e e3510000 e1a02000 0a00000d (e5d03000) ---[ end trace ca98273dc605a04f ]--- The panic is caused by the mwifiex_info_read() routine assuming that there can only be four modes (0-3) which is an invalid assumption. For example, when testing P2P, the mode is '8' (P2P_CLIENT) so the code accesses data beyond the bounds of the bss_modes[] array which causes the panic. Fix this by updating bss_modes[] to support the current list of modes and adding a check to prevent the out-of-bounds access from occuring in the future when more modes are added. Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Acked-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-12iwlwifi: fix rate control regressionMoshe Benji2-1/+2
Since driver does not use control.rates[0].count, we have never set that variable. But currently, after rate control API rewrite, this is required by mac80211. Otherwise legacy rates control does not work and we transmit always at 1Mbit/s on pre 11n networks. [same fix as for iwlegacy, thanks Stanislaw!] Signed-off-by: Moshe Benji <Moshe.Benji@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-06-12gianfar: Add backwards compatible Single Queue mode pollingClaudiu Manoil1-2/+49
Older Single Queue (SQ_SG_MODE) devices like TSEC (i.e. mpc83xx) don't feature the frame receive indication bits (RXF) in RSTAT. For these and for the rest of the SQ_SG_MODE devices, provide the appropiate polling routine that handles a single pair of Rx/Tx BD rings, removing the overhead incurred by the multiple queues/ multiple interrupt group devices (veTSEC/ eTSEC2.0 devices). So this is primarily a fix for the TSEC devices. Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-12sfc: Store port number in private data, not net_device::dev_idBen Hutchings2-2/+3
We should not use net_device::dev_id to indicate the port number, as this affects the way the local part of IPv6 addresses is normally generated. This field was intended for use where multiple devices may share a single assigned MAC address and need to have different IPv6 addresses. Siena's two ports each have their own MAC addresses. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-12team: remove synchronize_rcu() called during port disableJiri Pirko3-18/+8
Check the unlikely case of team->en_port_count == 0 before modulo operation. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-12team: use kfree_rcu instead of synchronize_rcu in team_port_devJiri Pirko1-2/+1
Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-12team: remove synchronize_rcu() called during queue override changeJiri Pirko1-16/+47
This patch removes synchronize_rcu() from function __team_queue_override_port_del(). That can be done because it is ok to do list_del_rcu() and list_add_tail_rcu() on the same list_head member without calling synchronize_rcu() in between. A bit of refactoring needed to be done because INIT_LIST_HEAD needed to be removed (to not kill the forward pointer) as well. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Flavio Leitner <fbl@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-12net: can: Convert to use devm_ioremap_resourceTushar Behera1-2/+2
Commit 75096579c3ac ("lib: devres: Introduce devm_ioremap_resource()") introduced devm_ioremap_resource() and deprecated the use of devm_request_and_ioremap(). Signed-off-by: Tushar Behera <tushar.behera@linaro.org> CC: netdev@vger.kernel.org CC: linux-can@vger.kernel.org CC: Marc Kleine-Budde <mkl@pengutronix.de> CC: Wolfgang Grandegger <wg@grandegger.com> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-12net: emaclite: Convert to use devm_ioremap_resourceTushar Behera1-2/+4
Commit 75096579c3ac ("lib: devres: Introduce devm_ioremap_resource()") introduced devm_ioremap_resource() and deprecated the use of devm_request_and_ioremap(). Signed-off-by: Tushar Behera <tushar.behera@linaro.org> CC: netdev@vger.kernel.org CC: "David S. Miller" <davem@davemloft.net> CC: Michal Simek <michal.simek@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-12net: fec: Convert to use devm_ioremap_resourceTushar Behera1-6/+6
Commit 75096579c3ac ("lib: devres: Introduce devm_ioremap_resource()") introduced devm_ioremap_resource() and deprecated the use of devm_request_and_ioremap(). Signed-off-by: Tushar Behera <tushar.behera@linaro.org> CC: netdev@vger.kernel.org CC: "David S. Miller" <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-123c59x: consolidate error cleanup in vortex_init_one()Sergei Shtylyov1-13/+12
The PCI driver's probe() method duplicates the error cleanup code each time it has to do error exit. Consolidate the error cleanup code in one place and use *goto* to jump to the right places. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by: Steffen Klassert <klassert@mathematik.tu-chemnitz.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-12veth: remove redundant call of dev_alloc_nameHong zhi guo1-7/+0
it's called in the following register_netdevice. No need to call it here. Tested with "ip link add type veth" and "ip link add xxx%d type veth". Signed-off-by: Hong Zhiguo <honkiko@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-12team: move add to port list before port enablementJiri Pirko1-1/+1
team_port_enable() adds port to port_hashlist. Reader sees port in team_get_port_by_index_rcu() and returns it, but team_get_first_port_txable_rcu() tries to go through port_list, where the port is not inserted yet -> NULL pointer dereference. Fix this by reordering port_list and port_hashlist insertion. Panic is easily triggeable when txing packets and adding/removing port in a loop. Introduced by commit 3d249d4c "net: introduce ethernet teaming device" Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-12team: check return value of team_get_port_by_index_rcu() for NULLJiri Pirko2-0/+4
team_get_port_by_index_rcu() might return NULL due to race between port removal and skb tx path. Panic is easily triggeable when txing packets and adding/removing port in a loop. introduced by commit 3d249d4ca "net: introduce ethernet teaming device" and commit 753f993911b "team: introduce random mode" (for random mode) Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-12tuntap: set SOCK_ZEROCOPY flag during openJason Wang1-0/+2
Commit 54f968d6efdbf7dec36faa44fc11f01b0e4d1990 (tuntap: move socket to tun_file) forgets to set SOCK_ZEROCOPY flag, which will prevent vhost_net from doing zercopy w/ tap. This patch fixes this by setting it during file open. Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-11Merge branch 'master' of ↵John W. Linville160-2038/+18875
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem Conflicts: drivers/net/wireless/ath/ath9k/debug.c net/mac80211/iface.c
2013-06-11cw1200: Fix an assorted pile of checkpatch warnings.Solomon Peachy9-75/+80
Signed-off-by: Solomon Peachy <pizza@shaftnet.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-11cw1200: Eliminate the ETF debug/engineering code.Solomon Peachy7-349/+2
This is only really useful for people who are bringing up new hardware designs and have access to the proprietary vendor tools that interface with this mode. It'll live out of tree until it's rewritten to use a less kludgy interface. Signed-off-by: Solomon Peachy <pizza@shaftnet.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-11cw1200: Remove "ITP" debug subsystem.Solomon Peachy8-905/+3
This can live on as an out-of-tree patch for those that care. Signed-off-by: Solomon Peachy <pizza@shaftnet.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-11qmi_wwan/cdc_ether: let qmi_wwan handle the Huawei E1820Bjørn Mork2-0/+7
Another QMI speaking Qualcomm based device, which should be driven by qmi_wwan, while cdc_ether should ignore it. Like on other Huawei devices, the wwan function can appear either as a single vendor specific interface or as a CDC ECM class function using separate control and data interfaces. The ECM control interface protocol is 0xff, likely in an attempt to indicate that vendor specific management is required. In addition to the near standard CDC class, Huawei also add vendor specific AT management commands to their firmwares. This is probably an attempt to support non-Windows systems using standard class drivers. Unfortunately, this part of the firmware is often buggy. Linux is much better off using whatever native vendor specific management protocol the device offers, and Windows uses, whenever possible. This means QMI in the case of Qualcomm based devices. The E1820 has been verified to work fine with QMI. Matching on interface number is necessary to distiguish the wwan function from serial functions in the single interface mode, as both function types will have class/subclass/function set to ff/ff/ff. The control interface number does not change in CDC ECM mode, so the interface number matching rule is sufficient to handle both modes. The cdc_ether blacklist entry is only relevant in CDC ECM mode, but using a similar interface number based rule helps document this as a transfer from one driver to another. Other Huawei 02/06/ff devices are left with the cdc_ether driver because we do not know whether they are based on Qualcomm chips. The Huawei specific AT command management is known to be somewhat hardware independent, and their usage of these class codes may also be independent of the modem hardware. Reported-by: Graham Inggs <graham.inggs@uct.ac.za> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-11xen-netfront: use skb_partial_csum_set() to simplify the codesLi RongQing1-12/+8
use skb_partial_csum_set() to simplify the codes Cc: Jason Wang <jasowang@redhat.com> Signed-off-by: Li RongQing <roy.qing.li@gmail.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-11sh_eth: fix result of sh_eth_check_reset() on timeoutSergei Shtylyov1-2/+2
When the first loop in sh_eth_check_reset() runs to its end, 'cnt' is 0, so the following check for 'cnt < 0' fails to catch the timeout. Fix the condition in this check, so that the timeout is actually reported. While at it, fix the grammar in the failure message... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-11net/ti davinci_mdio: don't hold a spin lock while calling pm_runtimeSebastian Siewior1-3/+2
was playing with suspend and run into this: |BUG: sleeping function called from invalid context at drivers/base/power/runtime.c:891 |in_atomic(): 1, irqs_disabled(): 0, pid: 1963, name: bash |6 locks held by bash/1963: |CPU: 0 PID: 1963 Comm: bash Not tainted 3.10.0-rc4+ #50 |[<c0014fdc>] (unwind_backtrace+0x0/0xf8) from [<c0011da4>] (show_stack+0x10/0x14) |[<c0011da4>] (show_stack+0x10/0x14) from [<c02e8680>] (__pm_runtime_idle+0xa4/0xac) |[<c02e8680>] (__pm_runtime_idle+0xa4/0xac) from [<c0341158>] (davinci_mdio_suspend+0x6c/0x9c) |[<c0341158>] (davinci_mdio_suspend+0x6c/0x9c) from [<c02e0628>] (platform_pm_suspend+0x2c/0x54) |[<c02e0628>] (platform_pm_suspend+0x2c/0x54) from [<c02e52bc>] (dpm_run_callback.isra.3+0x2c/0x64) |[<c02e52bc>] (dpm_run_callback.isra.3+0x2c/0x64) from [<c02e57e4>] (__device_suspend+0x100/0x22c) |[<c02e57e4>] (__device_suspend+0x100/0x22c) from [<c02e67e8>] (dpm_suspend+0x68/0x230) |[<c02e67e8>] (dpm_suspend+0x68/0x230) from [<c0072a20>] (suspend_devices_and_enter+0x68/0x350) |[<c0072a20>] (suspend_devices_and_enter+0x68/0x350) from [<c0072f18>] (pm_suspend+0x210/0x24c) |[<c0072f18>] (pm_suspend+0x210/0x24c) from [<c0071c74>] (state_store+0x6c/0xbc) |[<c0071c74>] (state_store+0x6c/0xbc) from [<c02714dc>] (kobj_attr_store+0x14/0x20) |[<c02714dc>] (kobj_attr_store+0x14/0x20) from [<c01341a0>] (sysfs_write_file+0x16c/0x19c) |[<c01341a0>] (sysfs_write_file+0x16c/0x19c) from [<c00ddfe4>] (vfs_write+0xb4/0x190) |[<c00ddfe4>] (vfs_write+0xb4/0x190) from [<c00de3a4>] (SyS_write+0x3c/0x70) |[<c00de3a4>] (SyS_write+0x3c/0x70) from [<c000e2c0>] (ret_fast_syscall+0x0/0x48) I don't see a reason why the pm_runtime call must be under the lock. Further I don't understand why this is a spinlock and not mutex. Cc: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-10ixgbe: add extra stats for ndo_ll_pollEliezer Tamir3-0/+60
Add additional statistics to the ixgbe driver for ndo_ll_poll Defined under LL_EXTENDED_STATS Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Eliezer Tamir <eliezer.tamir@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-10ixgbe: add support for ndo_ll_pollEliezer Tamir3-8/+177
Add the ixgbe driver code implementing ndo_ll_poll. Adds ndo_ll_poll method and locking between it and the napi poll. When receiving a packet we use skb_mark_ll to record the napi it came from. Add each napi to the napi_hash right after netif_napi_add(). Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Eliezer Tamir <eliezer.tamir@linux.intel.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-10tuntap: fix a possible race between queue selection and changing queuesJason Wang1-1/+1
Complier may generate codes that re-read the tun->numqueues during tun_select_queue(). This may be a race if vlan->numqueues were changed in the same time and can lead unexpected result (e.g. very huge value). We need prevent the compiler from generating such codes by adding an ACCESS_ONCE() to make sure tun->numqueues were only read once. Bug were introduced by commit c8d68e6be1c3b242f1c598595830890b65cea64a (tuntap: multiqueue support). Reported-by: Michael S. Tsirkin <mst@redhat.com> Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-10bcm63xx_enet: add support for Broadcom BCM63xx integrated gigabit switchMaxime Bizon2-12/+998
Newer Broadcom BCM63xx SoCs: 6328, 6362 and 6368 have an integrated switch which needs to be driven slightly differently from the traditional external switches. This patch introduces changes in arch/mips/bcm63xx in order to: - register a bcm63xx_enetsw driver instead of bcm63xx_enet driver - update DMA channels configuration & state RAM base addresses - add a new platform data configuration knob to define the number of ports per switch/device and force link on some ports - define the required switch registers On the driver side, the following changes are required: - the switch ports need to be polled to ensure the link is up and running and RX/TX can properly work - basic switch configuration needs to be performed for the switch to forward packets to the CPU - update the MIB counters since the integrated Signed-off-by: Maxime Bizon <mbizon@freebox.fr> Signed-off-by: Jonas Gorski <jogo@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2025-12-14 08:54:04 +0000