| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
[ Upstream commit f3c3ccc4fe49dbc560b01d16bebd1b116c46c2b4 ]
There are ACS quirks that hijack the normal ACS processing and deliver to
to special quirk code. The enable path needs to call
pci_dev_specific_enable_acs() and then pci_dev_specific_acs_enabled() will
report the hidden ACS state controlled by the quirk.
The recent rework got this out of order and we should try to call
pci_dev_specific_enable_acs() regardless of any actual ACS support in the
device.
As before command line parameters that effect standard PCI ACS don't
interact with the quirk versions, including the new config_acs= option.
Link: https://lore.kernel.org/r/0-v1-f96b686c625b+124-pci_acs_quirk_fix_jgg@nvidia.com
Fixes: 47c8846a49ba ("PCI: Extend ACS configurability")
Reported-by: Jiri Slaby <jirislaby@kernel.org>
Closes: https://lore.kernel.org/all/e89107da-ac99-4d3a-9527-a4df9986e120@kernel.org
Closes: https://bugzilla.suse.com/show_bug.cgi?id=1229019
Tested-by: Steffen Dirkwinkel <me@steffen.cc>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 0cca961a026177af69044f10d6ae76d8ce043764 upstream.
The pci_bus_release_domain_nr() API is supposed to free the domain
number allocated by pci_bus_find_domain_nr(). Most of the callers of
pci_bus_find_domain_nr(), store the domain number in pci_bus::domain_nr.
As such, the pci_bus_release_domain_nr() implicitly frees the domain
number by dereferencing 'struct pci_bus'. However, one of the callers
of this API, the PCI endpoint subsystem, doesn't have 'struct pci_bus',
so it only passes NULL. Due to this, the API will end up dereferencing
the NULL pointer.
To fix this issue, pass the domain number to this API explicitly. Since
'struct pci_bus' is not used for anything else other than extracting the
domain number, it makes sense to pass the domain number directly.
Fixes: 0328947c5032 ("PCI: endpoint: Assign PCI domain number for endpoint controllers")
Closes: https://lore.kernel.org/linux-pci/c0c40ddb-bf64-4b22-9dd1-8dbb18aa2813@stanley.mountain
Link: https://lore.kernel.org/linux-pci/20240912053025.25314-1-manivannan.sadhasivam@linaro.org
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 59100eb248c0b15585affa546c7f6834b30eb5a4 upstream.
Given how the call place in pcie_wait_for_link_delay() got structured now,
and that pcie_retrain_link() returns a potentially useful error code,
convert pcie_failed_link_retrain() to return an error code rather than a
boolean status, fixing handling at the call site mentioned. Update the
other call site accordingly.
Fixes: 1abb47390350 ("Merge branch 'pci/enumeration'")
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2408091156530.61955@angie.orcam.me.uk
Reported-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/aa2d1c4e-9961-d54a-00c7-ddf8e858a9b0@linux.intel.com/
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Cc: <stable@vger.kernel.org> # v6.5+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8037ac08c2bbb3186f83a5a924f52d1048dbaec5 upstream.
The LBMS bit, where implemented, is set by hardware either in response
to the completion of retraining caused by writing 1 to the Retrain Link
bit or whenever hardware has changed the link speed or width in attempt
to correct unreliable link operation. It is never cleared by hardware
other than by software writing 1 to the bit position in the Link Status
register and we never do such a write.
We currently have two places, namely apply_bad_link_workaround() and
pcie_failed_link_retrain() in drivers/pci/controller/dwc/pcie-tegra194.c
and drivers/pci/quirks.c respectively where we check the state of the LBMS
bit and neither is interested in the state of the bit resulting from the
completion of retraining, both check for a link fault.
And in particular pcie_failed_link_retrain() causes issues consequently, by
trying to retrain a link where there's no downstream device anymore and the
state of 1 in the LBMS bit has been retained from when there was a device
downstream that has since been removed.
Clear the LBMS bit then at the conclusion of pcie_retrain_link(), so that
we have a single place that controls it and that our code can track link
speed or width changes resulting from unreliable link operation.
Fixes: a89c82249c37 ("PCI: Work around PCIe link training failures")
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2408091133140.61955@angie.orcam.me.uk
Reported-by: Matthew W Carlis <mattc@purestorage.com>
Link: https://lore.kernel.org/r/20240806000659.30859-1-mattc@purestorage.com/
Link: https://lore.kernel.org/r/20240722193407.23255-1-mattc@purestorage.com/
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Cc: <stable@vger.kernel.org> # v6.5+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 3e40aa29d47e231a54640addf6a09c1f64c5b63f ]
__pci_reset_bus() calls pci_bridge_secondary_bus_reset() to perform the
reset and also waits for the Secondary Bus to become again accessible.
__pci_reset_bus() then calls pci_bus_restore_locked() that restores the PCI
devices connected to the bus, and if necessary, recursively restores also
the subordinate buses and their devices.
The logic in pci_bus_restore_locked() does not take into account that after
restoring a device on one level, there might be another Link Downstream
that can only start to come up after restore has been performed for its
Downstream Port device. That is, the Link may require additional wait until
it becomes accessible.
Similarly, pci_slot_restore_locked() lacks wait.
Amend pci_bus_restore_locked() and pci_slot_restore_locked() to wait for
the Secondary Bus before recursively performing the restore of that bus.
Fixes: 090a3c5322e9 ("PCI: Add pci_reset_slot() and pci_reset_bus()")
Link: https://lore.kernel.org/r/20240808121708.2523-1-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
pci_intx() becomes managed if pcim_enable_device() has been called in
advance. Commit 25216afc9db5 ("PCI: Add managed pcim_intx()") changed this
behavior so that pci_intx() always leads to creation of a separate device
resource for itself, whereas earlier, a shared resource was used for all
PCI devres operations.
Unfortunately, pci_intx() seems to be used in some drivers' remove() paths;
in the managed case this causes a device resource to be created on driver
detach, which causes .probe() to fail if the driver is reloaded:
pci 0000:00:1f.2: Resources present before probing
Fix the regression by only redirecting pci_intx() to its managed twin
pcim_intx() if the pci_command changes.
Link: https://lore.kernel.org/r/20240725120729.59788-2-pstanner@redhat.com
Fixes: 25216afc9db5 ("PCI: Add managed pcim_intx()")
Reported-by: Damien Le Moal <dlemoal@kernel.org>
Closes: https://lore.kernel.org/all/b8f4ba97-84fc-4b7e-ba1a-99de2d9f0118@kernel.org/
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
[bhelgaas: add error message to commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Damien Le Moal <dlemoal@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Define PCIE_RESET_CONFIG_DEVICE_WAIT_MS for the generic 100ms
required after reset before config access (Kevin Xie)
- Define PCIE_T_RRS_READY_MS for the generic 100ms required after
reset before config access (probably should be unified with
PCIE_RESET_CONFIG_DEVICE_WAIT_MS) (Damien Le Moal)
Resource management:
- Rename find_resource() to find_resource_space() to be more
descriptive (Ilpo Järvinen)
- Export find_resource_space() for use by PCI core, which needs to
learn whether there is available space for a bridge window (Ilpo
Järvinen)
- Prevent double counting of resources so window size doesn't grow on
each remove/rescan cycle (Ilpo Järvinen)
- Relax bridge window sizing algorithm so a device doesn't break
simply because it was removed and rescanned (Ilpo Järvinen)
- Evaluate the ACPI PRESERVE_BOOT_CONFIG _DSM in
pci_register_host_bridge() (not acpi_pci_root_create()) so we can
unify it with similar DT functionality (Vidya Sagar)
- Extend use of DT "linux,pci-probe-only" property so it works
per-host bridge as well as globally (Vidya Sagar)
- Unify support for ACPI PRESERVE_BOOT_CONFIG _DSM and the DT
"linux,pci-probe-only" property in pci_preserve_config() (Vidya
Sagar)
Driver binding:
- Add devres infrastructure for managed request and map of partial
BAR resources (Philipp Stanner)
- Deprecate pcim_iomap_table() because uses like
"pcim_iomap_table()[0]" have no good way to return errors (Philipp
Stanner)
- Add an always-managed pcim_request_region() for use instead of
pci_request_region() and similar, which are sometimes managed
depending on whether pcim_enable_device() has been called
previously (Philipp Stanner)
- Reimplement pcim_set_mwi() so it doesn't need to keep store MWI
state (Philipp Stanner)
- Add pcim_intx() for use instead of pci_intx(), which is sometimes
managed depending on whether pcim_enable_device() has been called
previously (Philipp Stanner)
- Add managed pcim_iomap_range() to allow mapping of a partial BAR
(Philipp Stanner)
- Fix a devres mapping leak in drm/vboxvideo (Philipp Stanner)
Error handling:
- Add missing bridge locking in device reset path and add a warning
for other possible lock issues (Dan Williams)
- Fix use-after-free on concurrent DPC and hot-removal (Lukas Wunner)
Power management:
- Disable AER and DPC during suspend to avoid spurious wakeups if
they share an interrupt with PME (Kai-Heng Feng)
PCIe native device hotplug:
- Detect if a device was removed or replaced during system sleep so
we don't assume a new device is the one that used to be there
(Lukas Wunner)
Virtualization:
- Add an ACS quirk for Broadcom BCM5760X multi-function NIC; it
prevents transactions between functions even though it doesn't
advertise ACS, so the functions can be attached individually via
VFIO (Ajit Khaparde)
Peer-to-peer DMA:
- Add a "pci=config_acs=" kernel command-line parameter to relax
default ACS settings to enable additional peer-to-peer
configurations. Requires expert knowledge of topology and ACS
operation (Vidya Sagar)
Endpoint framework:
- Remove unused struct pci_epf_group.type_group (Christophe JAILLET)
- Fix error handling in vpci_scan_bus() and epf_ntb_epc_cleanup()
(Dan Carpenter)
- Make struct pci_epc_class constant (Greg Kroah-Hartman)
- Remove unused pci_endpoint_test_bar_{readl,writel} functions
(Jiapeng Chong)
- Rename "BME" to "Bus Master Enable" (Manivannan Sadhasivam)
- Rename struct pci_epc_event_ops.core_init() callback to epc_init()
(Manivannan Sadhasivam)
- Move DMA init to MHI .epc_init() callback for uniformity
(Manivannan Sadhasivam)
- Cancel EPF test delayed work when link goes down (Manivannan
Sadhasivam)
- Add struct pci_epc_event_ops.epc_deinit() callback for cleanup
needed on fundamental reset (Manivannan Sadhasivam)
- Add 64KB alignment to endpoint test to support Rockchip rk3588
(Niklas Cassel)
- Optimize endpoint test by using memcpy() instead of readl() (Niklas
Cassel)
Device tree bindings:
- Add generic "ats-supported" property to advertise that a PCIe Root
Complex supports ATS (Jean-Philippe Brucker)
Amazon Annapurna Labs PCIe controller driver:
- Validate IORESOURCE_BUS presence to avoid NULL pointer dereference
(Aleksandr Mishin)
Axis ARTPEC-6 PCIe controller driver:
- Rename .cpu_addr_fixup() parameter to reflect that it is a PCI
address, not a CPU address (Niklas Cassel)
Freescale i.MX6 PCIe controller driver:
- Convert to agnostic GPIO API (Andy Shevchenko)
Freescale Layerscape PCIe controller driver:
- Make struct mobiveil_rp_ops constant (Christophe JAILLET)
- Use new generic dw_pcie_ep_linkdown() to handle link-down events
(Manivannan Sadhasivam)
HiSilicon Kirin PCIe controller driver:
- Convert to agnostic GPIO API (Andy Shevchenko)
- Use _scoped() iterator for OF children to ensure refcounts are
decremented at loop exit (Javier Carrasco)
Intel VMD host bridge driver:
- Create sysfs "domain" symlink before downstream devices are exposed
to userspace by pci_bus_add_devices() (Jiwei Sun)
Loongson PCIe controller driver:
- Enable MSI when LS7A is used with new CPUs that have integrated
PCIe Root Complex, e.g., Loongson-3C6000, so downstream devices can
use MSI (Huacai Chen)
Microchip AXI PolarFlare PCIe controller driver:
- Move pcie-microchip-host.c to a new PLDA directory (Minda Chen)
- Factor PLDA generic items out to a common
plda,xpressrich3-axi-common.yaml binding (Minda Chen)
- Factor PLDA generic data structures and code out to shared
pcie-plda.h, pcie-plda-host.c (Minda Chen)
- Add PLDA generic interrupt handling with a .request_event_irq()
callback for vendor-specific events (Minda Chen)
- Add PLDA generic host init/deinit and map bus functions for use by
vendor-specific drivers (Minda Chen)
- Rework to use PLDA core (Minda Chen)
Microsoft Hyper-V host bridge driver:
- Return zero, not garbage, when reading PCI_INTERRUPT_PIN (Wei Liu)
NVIDIA Tegra194 PCIe controller driver:
- Remove unused struct tegra_pcie_soc (Dr. David Alan Gilbert)
- Set 64KB inbound ATU alignment restriction (Jon Hunter)
Qualcomm PCIe controller driver:
- Make the MHI reg region mandatory for X1E80100, since all PCIe
controllers have it (Abel Vesa)
- Prevent use of uninitialized data and possible error pointer
dereference (Dan Carpenter)
- Return error, not success, if dev_pm_opp_find_freq_floor() fails
(Dan Carpenter)
- Add Operating Performance Points (OPP) support to scale performance
state based on aggregate link bandwidth to improve SoC power
efficiency (Krishna chaitanya chundru)
- Vote for the CPU-PCIe ICC (interconnect) path to ensure it stays
active even if other drivers don't vote for it (Krishna chaitanya
chundru)
- Use devm_clk_bulk_get_all() to get all the clocks from DT to avoid
writing out all the clock names (Manivannan Sadhasivam)
- Add DT binding and driver support for the SA8775P SoC (Mrinmay
Sarkar)
- Add HDMA support for the SA8775P SoC (Mrinmay Sarkar)
- Override the SA8775P NO_SNOOP default to avoid possible memory
corruption (Mrinmay Sarkar)
- Make sure resources are disabled during PERST# assertion, even if
the link is already disabled (Manivannan Sadhasivam)
- Use new generic dw_pcie_ep_linkdown() to handle link-down events
(Manivannan Sadhasivam)
- Add DT and endpoint driver support for the SA8775P SoC (Mrinmay
Sarkar)
- Add Hyper DMA (HDMA) support for the SA8775P SoC and enable it in
the EPF MHI driver (Mrinmay Sarkar)
- Set PCIE_PARF_NO_SNOOP_OVERIDE to override the default NO_SNOOP
attribute on the SA8775P SoC (both Root Complex and Endpoint mode)
to avoid possible memory corruption (Mrinmay Sarkar)
Renesas R-Car PCIe controller driver:
- Demote WARN() to dev_warn_ratelimited() in rcar_pcie_wakeup() to
avoid unnecessary backtrace (Marek Vasut)
- Add DT and driver support for R-Car V4H (R8A779G0) host and
endpoint. This requires separate proprietary firmware (Yoshihiro
Shimoda)
Rockchip PCIe controller driver:
- Assert PERST# for 100ms after power is stable (Damien Le Moal)
- Wait PCIE_T_RRS_READY_MS (100ms) after reset before starting
configuration (Damien Le Moal)
- Use GPIOD_OUT_LOW flag while requesting ep_gpio to fix a firmware
crash on Qcom-based modems with Rockpro64 board (Manivannan
Sadhasivam)
Rockchip DesignWare PCIe controller driver:
- Factor common parts of rockchip-dw-pcie DT binding to be shared by
Root Complex and Endpoint mode (Niklas Cassel)
- Add missing INTx signals to common DT binding (Niklas Cassel)
- Add eDMA items to DT binding for Endpoint controller (Niklas
Cassel)
- Fix initial dw-rockchip PERST# GPIO value to prevent unnecessary
short assert/deassert that causes issues with some WLAN controllers
(Niklas Cassel)
- Refactor dw-rockchip and add support for Endpoint mode (Niklas
Cassel)
- Call pci_epc_init_notify() and drop dw_pcie_ep_init_notify()
wrapper (Niklas Cassel)
- Add error messages in .probe() error paths to improve user
experience (Uwe Kleine-König)
Samsung Exynos PCIe controller driver:
- Use bulk clock APIs to simplify clock setup (Shradha Todi)
StarFive PCIe controller driver:
- Add DT binding and driver support for the StarFive JH7110
PLDA-based PCIe controller (Minda Chen)
Synopsys DesignWare PCIe controller driver:
- Add generic support for sending PME_Turn_Off when system suspends
(Frank Li)
- Fix incorrect interpretation of iATU slot 0 after PERST#
assert/deassert (Frank Li)
- Use msleep() instead of usleep_range() while waiting for link
(Konrad Dybcio)
- Refactor dw_pcie_edma_find_chip() to enable adding support for
Hyper DMA (HDMA) (Manivannan Sadhasivam)
- Enable drivers to supply the eDMA channel count since some can't
auto detect this (Manivannan Sadhasivam)
- Call pci_epc_init_notify() and drop dw_pcie_ep_init_notify()
wrapper (Manivannan Sadhasivam)
- Pass the eDMA mapping format directly from drivers instead of
maintaining a capability for it (Manivannan Sadhasivam)
- Add generic dw_pcie_ep_linkdown() to notify EPF drivers about
link-down events and restore non-sticky DWC registers lost on link
down (Manivannan Sadhasivam)
- Add vendor-specific "apb" reg name, interrupt names, INTx names to
generic binding (Niklas Cassel)
- Enforce DWC restriction that 64-bit BARs must start with an
even-numbered BAR (Niklas Cassel)
- Consolidate args of dw_pcie_prog_outbound_atu() into a structure
(Yoshihiro Shimoda)
- Add support for endpoints to send Message TLPs, e.g., for INTx
emulation (Yoshihiro Shimoda)
TI DRA7xx PCIe controller driver:
- Rename .cpu_addr_fixup() parameter to reflect that it is a PCI
address, not a CPU address (Niklas Cassel)
TI Keystone PCIe controller driver:
- Validate IORESOURCE_BUS presence to avoid NULL pointer dereference
(Aleksandr Mishin)
- Work around AM65x/DRA80xM Errata #i2037 that corrupts TLPs and
causes processor hangs by limiting Max_Read_Request_Size (MRRS) and
Max_Payload_Size (MPS) (Kishon Vijay Abraham I)
- Leave BAR 0 disabled for AM654x to fix a regression caused by
6ab15b5e7057 ("PCI: dwc: keystone: Convert .scan_bus() callback to
use add_bus"), which caused a 45-second boot delay (Siddharth
Vadapalli)
Xilinx Versal CPM PCIe controller driver:
- Fix overlapping bridge registers and 32-bit BAR addresses in DT
binding (Thippeswamy Havalige)
MicroSemi Switchtec management driver:
- Make struct switchtec_class constant (Greg Kroah-Hartman)
Miscellaneous:
- Remove unused struct acpi_handle_node (Dr. David Alan Gilbert)
- Add missing MODULE_DESCRIPTION() macros (Jeff Johnson)"
* tag 'pci-v6.11-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (154 commits)
PCI: loongson: Enable MSI in LS7A Root Complex
PCI: Extend ACS configurability
PCI: Add missing bridge lock to pci_bus_lock()
drm/vboxvideo: fix mapping leaks
PCI: Add managed pcim_iomap_range()
PCI: Remove legacy pcim_release()
PCI: Add managed pcim_intx()
PCI: vmd: Create domain symlink before pci_bus_add_devices()
PCI: qcom: Prevent use of uninitialized data in qcom_pcie_suspend_noirq()
PCI: qcom: Prevent potential error pointer dereference
PCI: qcom: Fix missing error code in qcom_pcie_probe()
PCI: Give pcim_set_mwi() its own devres cleanup callback
PCI: Move struct pci_devres.pinned bit to struct pci_dev
PCI: Remove struct pci_devres.enabled status bit
PCI: Document hybrid devres hazards
PCI: Add managed pcim_request_region()
PCI: Deprecate pcim_iomap_table(), pcim_iomap_regions_request_all()
PCI: Add managed partial-BAR request and map infrastructure
PCI: Add devres helpers for iomap table
PCI: Add and use devres helper for bit masks
...
|
|
- Use devm_clk_bulk_get_all() to get all the clocks from DT to avoid
writing out all the clock names (Manivannan Sadhasivam)
- Add DT binding and driver support for the SA8775P SoC (Mrinmay Sarkar)
- Refactor dw_pcie_edma_find_chip() to enable adding support for Hyper DMA
(HDMA) (Manivannan Sadhasivam)
- Enable drivers to supply the eDMA channel count since some can't auto
detect this (Manivannan Sadhasivam)
- Add HDMA support for the SA8775P SoC (Mrinmay Sarkar)
- Override the SA8775P NO_SNOOP default to avoid possible memory corruption
(Mrinmay Sarkar)
- Make sure resources are disabled during PERST# assertion, even if the
link is already disabled (Manivannan Sadhasivam)
- Vote for the CPU-PCIe ICC (interconnect) path to ensure it stays active
even if other drivers don't vote for it (Krishna chaitanya chundru)
- Add Operating Performance Points (OPP) to scale performance state based
on aggregate link bandwidth to improve SoC power efficiency (Krishna
chaitanya chundru)
- Return failure instead of success if dev_pm_opp_find_freq_floor() fails
(Dan Carpenter)
- Avoid an error pointer dereference if dev_pm_opp_find_freq_exact() fails
(Dan Carpenter)
- Prevent use of uninitialized data in qcom_pcie_suspend_noirq() (Dan
Carpenter)
* pci/controller/qcom:
PCI: qcom: Prevent use of uninitialized data in qcom_pcie_suspend_noirq()
PCI: qcom: Prevent potential error pointer dereference
PCI: qcom: Fix missing error code in qcom_pcie_probe()
PCI: qcom: Add OPP support to scale performance
PCI: Bring the PCIe speed to MBps logic to new pcie_dev_speed_mbps()
PCI: qcom: Add ICC bandwidth vote for CPU to PCIe path
PCI: qcom-ep: Disable resources unconditionally during PERST# assert
PCI: qcom-ep: Override NO_SNOOP attribute for SA8775P EP
PCI: qcom: Override NO_SNOOP attribute for SA8775P RC
PCI: epf-mhi: Enable HDMA for SA8775P SoC
PCI: qcom-ep: Add HDMA support for SA8775P SoC
PCI: dwc: Pass the eDMA mapping format flag directly from glue drivers
PCI: dwc: Skip finding eDMA channels count for HDMA platforms
PCI: dwc: Refactor dw_pcie_edma_find_chip() API
PCI: qcom-ep: Add support for SA8775P SOC
dt-bindings: PCI: qcom-ep: Add support for SA8775P SoC
PCI: qcom: Use devm_clk_bulk_get_all() API
|
|
- Warn about doing a Secondary Bus Reset without holding the device lock
(Dan Williams)
- Lock bridge in addition to downstream hierarchy before doing a Secondary
Bus Reset (Dan Williams)
* pci/reset:
PCI: Add missing bridge lock to pci_bus_lock()
PCI: Warn on missing cfg_access_lock during secondary bus reset
|
|
- If there's a device below a bridge, prevent a use-after-free by holding a
reference to the device while waiting for the secondary bus to be ready
in case the device is concurrently removed, e.g., by DPC (Lukas Wunner)
* pci/dpc:
PCI/DPC: Fix use-after-free on concurrent DPC and hot-removal
|
|
- Add pcim_add_mapping_to_legacy_table() and
pcim_remove_mapping_from_legacy_table() helper functions to simplify
devres iomap table (Philipp Stanner)
- Reimplement devres that take a bit mask of BARs in a way that can be used
to map partial BARs as well as entire BARs (Philipp Stanner)
- Deprecate pcim_iomap_table() and pcim_iomap_regions_request_all() in
favor of pcim_* request plus pcim_* mapping (Philipp Stanner)
- Add pcim_request_region(), a managed interface to request a single BAR
(Philipp Stanner)
- Use the existing pci_is_enabled() interface to replace the struct
devres.enabled bit (Philipp Stanner)
- Move the struct pci_devres.pinned bit to struct pci_dev (Philipp Stanner)
- Reimplement pcim_set_mwi() so it uses its own devres cleanup callback
instead of a special-purpose bit in struct pci_devres (Philipp Stanner)
- Add pcim_intx(), which is unambiguously managed, unlike pci_intx(), which
is managed if pcim_enable_device() has been called but unmanaged
otherwise (Philipp Stanner)
- Remove pcim_release(), which is no longer needed after previous cleanups
of pcim_set_mwi() and pci_intx() (Philipp Stanner)
- Add pcim_iomap_range(), a managed interface to map part of a BAR (Philipp
Stanner)
- Fix vboxvideo leak by using the new pcim_iomap_range() instead of the
unmanaged pci_iomap_range() (Philipp Stanner)
* pci/devres:
drm/vboxvideo: fix mapping leaks
PCI: Add managed pcim_iomap_range()
PCI: Remove legacy pcim_release()
PCI: Add managed pcim_intx()
PCI: Give pcim_set_mwi() its own devres cleanup callback
PCI: Move struct pci_devres.pinned bit to struct pci_dev
PCI: Remove struct pci_devres.enabled status bit
PCI: Document hybrid devres hazards
PCI: Add managed pcim_request_region()
PCI: Deprecate pcim_iomap_table(), pcim_iomap_regions_request_all()
PCI: Add managed partial-BAR request and map infrastructure
PCI: Add devres helpers for iomap table
PCI: Add and use devres helper for bit masks
|
|
PCIe ACS settings control the level of isolation and the possible P2P paths
between devices. With greater isolation the kernel will create smaller
iommu_groups and with less isolation there is more HW that can achieve P2P
transfers. From a virtualization perspective all devices in the same
iommu_group must be assigned to the same VM as they lack security
isolation.
There is no way for the kernel to automatically know the correct ACS
settings for any given system and workload. Existing command line options
(e.g., disable_acs_redir) allow only for large scale change, disabling all
isolation, but this is not sufficient for more complex cases.
Add a kernel command-line option 'config_acs' to directly control all the
ACS bits for specific devices, which allows the operator to setup the right
level of isolation to achieve the desired P2P configuration. The
definition is future proof; when new ACS bits are added to the spec the
open syntax can be extended.
ACS needs to be setup early in the kernel boot as the ACS settings affect
how iommu_groups are formed. iommu_group formation is a one time event
during initial device discovery, so changing ACS bits after kernel boot can
result in an inaccurate view of the iommu_groups compared to the current
isolation configuration.
ACS applies to PCIe Downstream Ports and multi-function devices. The
default ACS settings are strict and deny any direct traffic between two
functions. This results in the smallest iommu_group the HW can support.
Frequently these values result in slow or non-working P2PDMA.
ACS offers a range of security choices controlling how traffic is
allowed to go directly between two devices. Some popular choices:
- Full prevention
- Translated requests can be direct, with various options
- Asymmetric direct traffic, A can reach B but not the reverse
- All traffic can be direct
Along with some other less common ones for special topologies.
The intention is that this option would be used with expert knowledge of
the HW capability and workload to achieve the desired configuration.
Link: https://lore.kernel.org/r/20240625153150.159310-1-vidyas@nvidia.com
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
[bhelgaas: add example, tidy printk formats]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
One of the true positives that the cfg_access_lock lockdep effort
identified is this sequence:
WARNING: CPU: 14 PID: 1 at drivers/pci/pci.c:4886 pci_bridge_secondary_bus_reset+0x5d/0x70
RIP: 0010:pci_bridge_secondary_bus_reset+0x5d/0x70
Call Trace:
<TASK>
? __warn+0x8c/0x190
? pci_bridge_secondary_bus_reset+0x5d/0x70
? report_bug+0x1f8/0x200
? handle_bug+0x3c/0x70
? exc_invalid_op+0x18/0x70
? asm_exc_invalid_op+0x1a/0x20
? pci_bridge_secondary_bus_reset+0x5d/0x70
pci_reset_bus+0x1d8/0x270
vmd_probe+0x778/0xa10
pci_device_probe+0x95/0x120
Where pci_reset_bus() users are triggering unlocked secondary bus resets.
Ironically pci_bus_reset(), several calls down from pci_reset_bus(), uses
pci_bus_lock() before issuing the reset which locks everything *but* the
bridge itself.
For the same motivation as adding:
bridge = pci_upstream_bridge(dev);
if (bridge)
pci_dev_lock(bridge);
to pci_reset_function() for the "bus" and "cxl_bus" reset cases, add
pci_dev_lock() for @bus->self to pci_bus_lock().
Link: https://lore.kernel.org/r/171711747501.1628941.15217746952476635316.stgit@dwillia2-xfh.jf.intel.com
Reported-by: Imre Deak <imre.deak@intel.com>
Closes: http://lore.kernel.org/r/6657833b3b5ae_14984b29437@dwillia2-xfh.jf.intel.com.notmuch
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
[bhelgaas: squash in recursive locking deadlock fix from Keith Busch:
https://lore.kernel.org/r/20240711193650.701834-1-kbusch@meta.com]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Kalle Valo <kvalo@kernel.org>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
|
|
pci_intx() is a "hybrid" function, i.e., it is managed if
pcim_enable_device() has been called, but unmanaged otherwise.
Add pcim_intx(), which is always managed, and implement pci_intx() using
it.
Remove the now-unused struct pci_devres.orig_intx and .restore_intx and
find_pci_dr().
Link: https://lore.kernel.org/r/20240613115032.29098-11-pstanner@redhat.com
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
[kwilczynski: squashed in
https://lore.kernel.org/r/426645d40776198e0fcc942f4a6cac4433c7a9aa.camel@redhat.com
to fix problem reported and tested by Ashish Kalra <Ashish.Kalra@amd.com>:
https://lore.kernel.org/r/20240708214656.4721-1-Ashish.Kalra@amd.com
https://lore.kernel.org/r/8c4634e9-4f02-4c54-9c89-d75e2f4bf026@amd.com/]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
The struct pci_devres has a separate boolean to track whether a device is
enabled. That, however, can easily be tracked in an agnostic manner through
the function pci_is_enabled().
Using it allows for simplifying the PCI devres implementation.
Replace the separate 'enabled' status bit from struct pci_devres with
calls to pci_is_enabled() at the appropriate places.
Link: https://lore.kernel.org/r/20240613115032.29098-8-pstanner@redhat.com
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
These functions:
pci_request_region()
pci_request_regions()
pci_request_regions_exclusive()
pci_request_selected_regions()
pci_request_selected_regions_exclusive()
pci_intx()
are "hybrid" functions that are managed if pcim_enable_device() has been
called, but unmanaged otherwise.
This is confusing and has already caused a bug (in 8558de401b5f
("drm/vboxvideo: use managed pci functions")) because users believe all PCI
functions, such as pci_iomap_range(), can become managed that way, which is
not the case.
Add comments to the relevant functions' docstrings that warn users about
this behavior.
Link: https://lore.kernel.org/r/20240613115032.29098-7-pstanner@redhat.com
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
These existing functions:
pci_request_region()
pci_request_selected_regions()
pci_request_selected_regions_exclusive()
are "hybrid" functions built on __pci_request_region() and are managed if
pcim_enable_device() has been called, but unmanaged otherwise.
Add these new functions:
pcim_request_region()
pcim_request_region_exclusive()
These are *always* managed and use the new pcim_addr_devres tracking
infrastructure instead of find_pci_dr() and struct pci_devres.region_mask.
Implement the hybrid functions using the new "pure" functions and remove
struct pci_devres.region_mask, which is no longer needed.
Link: https://lore.kernel.org/r/20240613115032.29098-6-pstanner@redhat.com
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
The pcim_iomap_devres table tracks entire-BAR mappings, so we can't use it
to build a managed version of pci_iomap_range(), which maps partial BARs.
Add struct pcim_addr_devres, which can track request and mapping of both
entire BARs and partial BARs.
Add the following internal devres functions based on struct
pcim_addr_devres:
pcim_iomap_region() # request & map entire BAR
pcim_iounmap_region() # unmap & release entire BAR
pcim_request_region() # request entire BAR
pcim_release_region() # release entire BAR
pcim_request_all_regions() # request all entire BARs
pcim_release_all_regions() # release all entire BARs
Rework the following public interfaces using the new infrastructure
listed above:
pcim_iomap() # map partial BAR
pcim_iounmap() # unmap partial BAR
pcim_iomap_regions() # request & map specified BARs
pcim_iomap_regions_request_all() # request all BARs, map specified BARs
pcim_iounmap_regions() # unmap & release specified BARs
Link: https://lore.kernel.org/r/20240613115032.29098-4-pstanner@redhat.com
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Bring the switch case in pcie_link_speed_mbps() to new function to
the header file so that it can be used in other places like
in controller driver.
Link: https://lore.kernel.org/linux-pci/20240619-opp_support-v15-3-aa769a2173a3@quicinc.com
Signed-off-by: Krishna chaitanya chundru <quic_krichai@quicinc.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
Keith reports a use-after-free when a DPC event occurs concurrently to
hot-removal of the same portion of the hierarchy:
The dpc_handler() awaits readiness of the secondary bus below the
Downstream Port where the DPC event occurred. To do so, it polls the
config space of the first child device on the secondary bus. If that
child device is concurrently removed, accesses to its struct pci_dev
cause the kernel to oops.
That's because pci_bridge_wait_for_secondary_bus() neglects to hold a
reference on the child device. Before v6.3, the function was only
called on resume from system sleep or on runtime resume. Holding a
reference wasn't necessary back then because the pciehp IRQ thread
could never run concurrently. (On resume from system sleep, IRQs are
not enabled until after the resume_noirq phase. And runtime resume is
always awaited before a PCI device is removed.)
However starting with v6.3, pci_bridge_wait_for_secondary_bus() is also
called on a DPC event. Commit 53b54ad074de ("PCI/DPC: Await readiness
of secondary bus after reset"), which introduced that, failed to
appreciate that pci_bridge_wait_for_secondary_bus() now needs to hold a
reference on the child device because dpc_handler() and pciehp may
indeed run concurrently. The commit was backported to v5.10+ stable
kernels, so that's the oldest one affected.
Add the missing reference acquisition.
Abridged stack trace:
BUG: unable to handle page fault for address: 00000000091400c0
CPU: 15 PID: 2464 Comm: irq/53-pcie-dpc 6.9.0
RIP: pci_bus_read_config_dword+0x17/0x50
pci_dev_wait()
pci_bridge_wait_for_secondary_bus()
dpc_reset_link()
pcie_do_recovery()
dpc_handler()
Fixes: 53b54ad074de ("PCI/DPC: Await readiness of secondary bus after reset")
Closes: https://lore.kernel.org/r/20240612181625.3604512-3-kbusch@meta.com/
Link: https://lore.kernel.org/linux-pci/8e4bcd4116fd94f592f2bf2749f168099c480ddf.1718707743.git.lukas@wunner.de
Reported-by: Keith Busch <kbusch@kernel.org>
Tested-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: stable@vger.kernel.org # v5.10+
|
|
The recent adventure with adding lockdep tracking for cfg_access_lock,
while it yielded many false positives [1], did catch a true positive in the
pci_reset_bus() path [2].
So, while lockdep is difficult to deploy, open coding a check that
cfg_access_lock is held during the reset is feasible.
While this does not offer a full backtrace, it should be sufficient to
implicate the caller of pci_bridge_secondary_bus_reset() as a path that
needs investigation.
Link: https://lore.kernel.org/r/171711746953.1628941.4692125082286867825.stgit@dwillia2-xfh.jf.intel.com
Link: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_134186v1/shard-dg2-1/igt@device_reset@unbind-reset-rebind.html [1]
Link: http://lore.kernel.org/r/cfb50601-5d2a-4676-a958-1bd3f1b06654@intel.com [2]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Kalle Valo <kvalo@kernel.org>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
|
|
While the experiment did reveal that there are additional places that are
missing the lock during secondary bus reset, one of the places that needs
to take cfg_access_lock (pci_bus_lock()) is not prepared for lockdep
annotation.
Specifically, pci_bus_lock() takes pci_dev_lock() recursively and is
currently dependent on the fact that the device_lock() is marked
lockdep_set_novalidate_class(&dev->mutex). Otherwise, without that
annotation, pci_bus_lock() would need to use something like a new
pci_dev_lock_nested() helper, a scheme to track a PCI device's depth in the
topology, and a hope that the depth of a PCI tree never exceeds the max
value for a lockdep subclass.
The alternative to ripping out the lockdep coverage would be to deploy a
dynamic lock key for every PCI device. Unfortunately, there is evidence
that increasing the number of keys that lockdep needs to track to be
per-PCI-device is prohibitively expensive for something like the
cfg_access_lock.
The main motivation for adding the annotation in the first place was to
catch unlocked secondary bus resets, not necessarily catch lock ordering
problems between cfg_access_lock and other locks. Solve that narrower
problem with follow-on patches, and just due to targeted revert for now.
Link: https://lore.kernel.org/r/171711746402.1628941.14575335981264103013.stgit@dwillia2-xfh.jf.intel.com
Fixes: 7e89efc6e9e4 ("PCI: Lock upstream bridge for pci_reset_function()")
Reported-by: Imre Deak <imre.deak@intel.com>
Closes: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_134186v1/shard-dg2-1/igt@device_reset@unbind-reset-rebind.html
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Kalle Valo <kvalo@kernel.org>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Cc: Jani Saarinen <jani.saarinen@intel.com>
|
|
- Constify pcibus_class (Heiner Kallweit)
- Annotate pci_cache_line_size variables as __ro_after_init (Heiner
Kallweit)
- Clean up formatting of PCI accessor macros (Ilpo Järvinen)
- Remove some OLPC dead code (Kunwu Chan)
- Make pcie_bandwidth_capable() static (Ilpo Järvinen)
* pci/misc:
PCI: Make pcie_bandwidth_capable() static
x86/pci: Remove OLPC dead code
PCI: Clean up accessor macro formatting
PCI/ERR: Cleanup misleading indentation inside if conditions
PCI: Annotate pci_cache_line_size variables as __ro_after_init
PCI: Constify pcibus_class
|
|
- Avoid D3cold for HP Pavilion 17 PC/1972 PCIe Ports because we can't get
them back out of D3cold (Mario Limonciello)
* pci/pm:
PCI/PM: Avoid D3cold for HP Pavilion 17 PC/1972 PCIe Ports
|
|
- Clear bridge Secondary Status errors after enumeration since enumeration
causes many errors (Vidya Sagar)
- Wait for Link Training==0 before starting Link retrain to avoid a race;
this was done previously but broken by a faulty merge (Ilpo Järvinen)
- Rename PCI_IRQ_LEGACY to PCI_IRQ_INTX to be more specific about what
"LEGACY" means (Damien Le Moal)
- Update return types of pci_find_capability() stubs to match the extern
declarations for the actual implementations (Bjorn Helgaas)
- Drop unnecessary pci_enable_device_io() from pata_cs5520 (Heiner
Kallweit)
- Drop unused pci_enable_device_io() (Heiner Kallweit)
- On 2016 and newer BIOSes, skip early E820 check for ECAM regions
described in ACPI MCFG; there's no spec requirement for E820
reservations, and some machines don't provide them (Bjorn Helgaas)
- If devices were disconnected while suspended, don't wait for them when
resuming (Ilpo Järvinen)
* pci/enumeration:
PCI: Do not wait for disconnected devices when resuming
x86/pci: Skip early E820 check for ECAM region
PCI: Remove unused pci_enable_device_io()
ata: pata_cs5520: Remove unnecessary call to pci_enable_device_io()
PCI: Update pci_find_capability() stub return types
PCI: Remove PCI_IRQ_LEGACY
scsi: vmw_pvscsi: Do not use PCI_IRQ_LEGACY instead of PCI_IRQ_LEGACY
scsi: pmcraid: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
scsi: mpt3sas: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
scsi: megaraid_sas: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
scsi: ipr: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
scsi: hpsa: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
scsi: arcmsr: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
wifi: rtw89: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
wifi: rtw88: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
wifi: ath10k: Refer to INTX instead of LEGACY
net: wangxun: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
r8169: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
net: alx: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
net: atlantic: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
net: amd-xgbe: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
VMCI: Use PCI_IRQ_ALL_TYPES to remove PCI_IRQ_LEGACY use
RDMA/vmw_pvrdma: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
IB/qib: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
drm/amdgpu: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
mfd: intel-lpss: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
ntb: idt: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
platform/x86: intel_ips: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
tty: 8250_pci: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
usb: hcd-pci: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
ASoC: Intel: avs: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
Documentation: PCI: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
PCI/portdrv: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
PCI/MSI: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
PCI: Clarify intent of LT wait
PCI: Wait for Link Training==0 before starting Link retrain
PCI: Clear Secondary Status errors after enumeration
|
|
On runtime resume, pci_dev_wait() is called:
pci_pm_runtime_resume()
pci_pm_bridge_power_up_actions()
pci_bridge_wait_for_secondary_bus()
pci_dev_wait()
While a device is runtime suspended along with its PCI hierarchy, the
device could get disconnected. In such case, the link will not come up no
matter how long pci_dev_wait() waits for it.
Besides the above mentioned case, there could be other ways to get the
device disconnected while pci_dev_wait() is waiting for the link to come
up.
Make pci_dev_wait() exit if the device is already disconnected to avoid
unnecessary delay.
The use cases of pci_dev_wait() boil down to two:
1. Waiting for the device after reset
2. pci_bridge_wait_for_secondary_bus()
The callers in both cases seem to benefit from propagating the
disconnection as error even if device disconnection would be more
analoguous to the case where there is no device in the first place which
return 0 from pci_dev_wait(). In the case 2, it results in unnecessary
marking of the devices disconnected again but that is just harmless extra
work.
Also make sure compiler does not become too clever with dev->error_state
and use READ_ONCE() to force a fetch for the up-to-date value.
Link: https://lore.kernel.org/r/20240208132322.4811-1-ilpo.jarvinen@linux.intel.com
Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
After the last user was removed, remove this PCI core function. It's very
unlikely that we'll see a new device requiring io space access, even though
memory space access is supported.
Link: https://lore.kernel.org/r/213ebf62-53a3-42b7-8518-ecd5cd6d6b08@gmail.com
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
|
|
pcie_bandwidth_capable() is only used within pci.c, make it static.
Link: https://lore.kernel.org/r/20240507121758.13849-1-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
By default Secondary Bus Reset (SBR) is masked for CXL Ports (see CXL r3.1,
sec 8.1.5.2).
Add cxl_reset_bus_function() (method "cxl_bus") to set the "Unmask SBR" bit
in the upstream CXL Port before performing the bus reset and restore the
original value afterwards.
This method allows the user to perform a bus reset on a CXL device without
needing to set the "Unmask SBR" bit via a user tool.
Link: https://lore.kernel.org/r/20240502165851.1948523-5-dave.jiang@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
[bhelgaas: simplify commit log, invert condition to avoid negation]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
|
