| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
[ Upstream commit 8866f4e557eba43e991f99711515217a95f62d2e ]
If cros_typec_probe is called before EC device is registered,
cros_typec_probe will fail. It may happen when cros-ec-typec.ko is
loaded before EC bus layer module (e.g. cros_ec_lpcs.ko,
cros_ec_spi.ko).
Return -EPROBE_DEFER when cros_typec_probe doesn't get EC device, so
the probe function can be called again after EC device is registered.
Signed-off-by: Tomasz Michalec <tmichalec@google.com>
Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
Link: https://lore.kernel.org/r/20250610153748.1858519-1-tmichalec@google.com
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6418a8504187dc7f5b6f9d0649c03e362cb0664b ]
When KCOV is enabled all functions get instrumented, unless the
__no_sanitize_coverage attribute is used. To prepare for
__no_sanitize_coverage being applied to __init functions[1], we have
to handle differences in how GCC's inline optimizations get resolved.
For thinkpad_acpi routines, this means forcing two functions to be
inline with __always_inline.
Link: https://lore.kernel.org/lkml/20250523043935.2009972-11-kees@kernel.org/ [1]
Signed-off-by: Kees Cook <kees@kernel.org>
Link: https://lore.kernel.org/r/20250529181831.work.439-kees@kernel.org
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 981d7f91aeda17424b29f033249f4fa7cd2a7556 ]
When the EC/ISH starts, it can take a while for all the sensors to be up
and running or declared broken.
If the sensor stack return -EBUSY when checking for sensor information,
retry up to 50 times.
It has been observed 100ms wait time is enough to have valid sensors
ready. It can take more time in case a sensor is really broken and is
not coming up.
Signed-off-by: Gwendal Grignou <gwendal@google.com>
Link: https://lore.kernel.org/r/20250623210518.306740-1-gwendal@google.com
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4ff3aeb664f7dfe824ba91ffb0b203397a8d431e ]
The Lenovo Yoga 6 13ACL6 82ND has a similar BIOS problem as other Lenovo
laptops from that vintage that causes a rather long resume from suspend.
Add it to the quirk list that manipulates the scratch register to avoid
the issue.
Reported-by: Adam Berglund <adam.f.berglund@hotmail.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4434
Tested-by: Adam Berglund <adam.f.berglund@hotmail.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Hans de Goede <hansg@kernel.org>
Link: https://lore.kernel.org/r/20250718172307.1928744-1-superm1@kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 54d5cd4719c5e87f33d271c9ac2e393147d934f8 upstream.
Usage of the intel_pmt_read() for binary sysfs, requires a pcidev. The
current use of the endpoint value is only valid for telemetry endpoint
usage.
Without the ep, the crashlog usage causes the following NULL pointer
exception:
BUG: kernel NULL pointer dereference, address: 0000000000000000
Oops: Oops: 0000 [#1] SMP NOPTI
RIP: 0010:intel_pmt_read+0x3b/0x70 [pmt_class]
Code:
Call Trace:
<TASK>
? sysfs_kf_bin_read+0xc0/0xe0
kernfs_fop_read_iter+0xac/0x1a0
vfs_read+0x26d/0x350
ksys_read+0x6b/0xe0
__x64_sys_read+0x1d/0x30
x64_sys_call+0x1bc8/0x1d70
do_syscall_64+0x6d/0x110
Augment struct intel_pmt_entry with a pointer to the pcidev to avoid
the NULL pointer exception.
Fixes: 045a513040cc ("platform/x86/intel/pmt: Use PMT callbacks")
Cc: stable@vger.kernel.org
Reviewed-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Link: https://lore.kernel.org/r/20250713172943.7335-2-michael.j.ruhl@intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e10981075adce203eac0be866389309eeb8ef11e upstream.
On some models supported by ideapad-laptop, the HW/FW can remember the
state of keyboard backlight among boots. However, it is always turned
off while shutting down, as a side effect of the LED class device
unregistering sequence.
This is inconvenient for users who always prefer turning on the
keyboard backlight. Thus, set LED_RETAIN_AT_SHUTDOWN on the LED class
device so that the state of keyboard backlight gets remembered, which
also aligns with the behavior of manufacturer utilities on Windows.
Fixes: 503325f84bc0 ("platform/x86: ideapad-laptop: add keyboard backlight control support")
Cc: stable@vger.kernel.org
Signed-off-by: Rong Zhang <i@rong.moe>
Reviewed-by: Hans de Goede <hansg@kernel.org>
Link: https://lore.kernel.org/r/20250707163808.155876-3-i@rong.moe
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 9533b789df7e8d273543a5991aec92447be043d7 upstream.
On devices supported by ideapad-laptop, the HW/FW can remember the
FnLock state among boots. However, since the introduction of the FnLock
LED class device, it is turned off while shutting down, as a side effect
of the LED class device unregistering sequence.
Many users always turn on FnLock because they use function keys much
more frequently than multimedia keys. The behavior change is
inconvenient for them. Thus, set LED_RETAIN_AT_SHUTDOWN on the LED class
device so that the FnLock state gets remembered, which also aligns with
the behavior of manufacturer utilities on Windows.
Fixes: 07f48f668fac ("platform/x86: ideapad-laptop: add FnLock LED class device")
Cc: stable@vger.kernel.org
Signed-off-by: Rong Zhang <i@rong.moe>
Reviewed-by: Hans de Goede <hansg@kernel.org>
Link: https://lore.kernel.org/r/20250707163808.155876-2-i@rong.moe
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8346c6af27f1c1410eb314f4be5875fdf1579a10 upstream.
Add missing empty member to `awcc_dmi_table`.
Cc: stable@vger.kernel.org
Fixes: 6d7f1b1a5db6 ("platform/x86: alienware-wmi: Split DMI table")
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Reviewed-by: Hans de Goede <hansg@kernel.org>
Link: https://lore.kernel.org/r/20250707-dmi-fix-v1-1-6730835d824d@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 2bfe3ae1aa45f8b61cb0dc462114fd0c9636ad32 ]
The think-lmi driver uses the firwmare_attributes_class. But this class
is registered after think-lmi, causing the "think-lmi" directory in
"/sys/class/firmware-attributes" to be missing when the driver is
compiled as builtin.
Fixes: 55922403807a ("platform/x86: think-lmi: Directly use firmware_attributes_class")
Signed-off-by: Torsten Hilbrich <torsten.hilbrich@secunet.com>
Link: https://lore.kernel.org/r/7dce5f7f-c348-4350-ac53-d14a8e1e8034@secunet.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0e2cebd72321caeef84b6ba7084e85be0287fb4b ]
For setting the enable value, the input should be 0 or 1 only. Use
kstrtobool() in place of kstrtoint() in mlxbf_pmc_enable_store() to
accept only valid input.
Fixes: 423c3361855c ("platform/mellanox: mlxbf-pmc: Add support for BlueField-3")
Signed-off-by: Shravan Kumar Ramani <shravankr@nvidia.com>
Reviewed-by: David Thompson <davthompson@nvidia.com>
Link: https://lore.kernel.org/r/2ee618c59976bcf1379d5ddce2fc60ab5014b3a9.1751380187.git.shravankr@nvidia.com
[ij: split kstrbool() change to own commit.]
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f8c1311769d3b2c82688b294b4ae03e94f1c326d ]
Before programming the event info, validate the event number received as input
by checking if it exists in the event_list. Also fix a typo in the comment for
mlxbf_pmc_get_event_name() to correctly mention that it returns the event name
when taking the event number as input, and not the other way round.
Fixes: 423c3361855c ("platform/mellanox: mlxbf-pmc: Add support for BlueField-3")
Signed-off-by: Shravan Kumar Ramani <shravankr@nvidia.com>
Reviewed-by: David Thompson <davthompson@nvidia.com>
Link: https://lore.kernel.org/r/2ee618c59976bcf1379d5ddce2fc60ab5014b3a9.1751380187.git.shravankr@nvidia.com
[ij: split kstrbool() change to own commit.]
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 44e6ca8faeeed12206f3e7189c5ac618b810bb9c ]
Since the input string passed via the command line appends a newline char,
it needs to be removed before comparison with the event_list.
Fixes: 1a218d312e65 ("platform/mellanox: mlxbf-pmc: Add Mellanox BlueField PMC driver")
Signed-off-by: Shravan Kumar Ramani <shravankr@nvidia.com>
Reviewed-by: David Thompson <davthompson@nvidia.com>
Link: https://lore.kernel.org/r/4978c18e33313b48fa2ae7f3aa6dbcfce40877e4.1751380187.git.shravankr@nvidia.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7dc6b2d3b5503bcafebbeaf9818112bf367107b4 ]
Add a DMI quirk entry for the ASUS Zenbook Duo UX8406CA 2025 model to use
the existing zenbook duo keyboard quirk.
Signed-off-by: Rahul Chandra <rahul@chandra.net>
Link: https://lore.kernel.org/r/20250624073301.602070-1-rahul@chandra.net
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 4f30f946f27b7f044cf8f3f1f353dee1dcd3517a upstream.
Many error paths in tlmi_sysfs_init() lead to sysfs groups being removed
when they were not even created.
Fix this by letting the kobject core manage these groups through their
kobj_type's defult_groups.
Fixes: a40cd7ef22fb ("platform/x86: think-lmi: Add WMI interface support on Lenovo platforms")
Cc: stable@vger.kernel.org
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://lore.kernel.org/r/20250630-lmi-fix-v3-3-ce4f81c9c481@gmail.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 9110056fe10b0519529bdbbac37311a5037ea0c2 upstream.
In tlmi_analyze(), allocated structs with an embedded kobject are freed
in error paths after the they were already initialized.
Fix this by first by avoiding the initialization of kobjects in
tlmi_analyze() and then by correctly cleaning them up in
tlmi_release_attr() using their kset's kobject list.
Fixes: a40cd7ef22fb ("platform/x86: think-lmi: Add WMI interface support on Lenovo platforms")
Fixes: 30e78435d3bf ("platform/x86: think-lmi: Split kobject_init() and kobject_add() calls")
Cc: stable@vger.kernel.org
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://lore.kernel.org/r/20250630-lmi-fix-v3-2-ce4f81c9c481@gmail.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8dab34ca77293b409c3223636dde915a22656748 upstream.
Avoid entering tlmi_release_attr() in error paths if both ksets are not
yet created.
This is accomplished by initializing them side by side.
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://lore.kernel.org/r/20250630-lmi-fix-v3-1-ce4f81c9c481@gmail.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 9ba75ccad85708c5a484637dccc1fc59295b0a83 ]
Every other s2idle cycle fails to reach hardware sleep when keyboard
wakeup is enabled. This appears to be an EC bug, but the vendor
refuses to fix it.
It was confirmed that turning off i8042 wakeup avoids ths issue
(albeit keyboard wakeup is disabled). Take the lesser of two evils
and add it to the i8042 quirk list.
Reported-by: Raoul <ein4rth@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220116
Tested-by: Raoul <ein4rth@gmail.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20250611203341.3733478-1-superm1@kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f8afb12a2d7503de6558c23cacd7acbf6e9fe678 ]
__hsmp_send_message sleeps between result read attempts and has a
timeout of 100ms. Under extreme load it's possible for these sleeps to
take a long time, exceeding the 100ms. In this case the current code
does not check the register and fails with ETIMEDOUT.
Refactor the loop to ensure there is at least one read of the register
after a sleep of any duration. This removes instances of ETIMEDOUT with
a single caller, even with a misbehaving scheduler. Tested on AMD
Bergamo machines.
Suggested-by: Blaise Sanouillet <linux@blaise.sanouillet.com>
Reviewed-by: Suma Hegde <suma.hegde@amd.com>
Tested-by: Suma Hegde <suma.hegde@amd.com>
Signed-off-by: Jake Hillion <jake@hillion.co.uk>
Link: https://lore.kernel.org/r/20250605-amd-hsmp-v2-1-a811bc3dd74a@hillion.co.uk
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 644bec18e705ca41d444053407419a21832fcb2f ]
Fixes a logic issue in mlxreg_lc_completion_notify() where the
intention was to check if MLXREG_LC_POWERED flag is not set before
powering on the device.
The original code used "state & ~MLXREG_LC_POWERED" to check for the
absence of the POWERED bit. However this condition evaluates to true
even when other bits are set, leading to potentially incorrect
behavior.
Corrected the logic to explicitly check for the absence of
MLXREG_LC_POWERED using !(state & MLXREG_LC_POWERED).
Fixes: 62f9529b8d5c ("platform/mellanox: mlxreg-lc: Add initial support for Nvidia line card devices")
Suggested-by: Vadim Pasternak <vadimp@nvidia.com>
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Link: https://lore.kernel.org/r/20250630105812.601014-1-alok.a.tiwari@oracle.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 314e5ad4782d08858b3abc325c0487bd2abc23a1 ]
Devices under the firmware_attributes_class do not have unique a dev_t.
Therefore, device_unregister() should be used instead of
device_destroy(), since the latter may match any device with a given
dev_t.
Fixes: e8a60aa7404b ("platform/x86: Introduce support for Systems Management Driver over WMI for Dell Systems")
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://lore.kernel.org/r/20250625-dest-fix-v1-3-3a0f342312bb@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 5ff1fbb3059730700b4823f43999fc1315984632 ]
Devices under the firmware_attributes_class do not have unique a dev_t.
Therefore, device_unregister() should be used instead of
device_destroy(), since the latter may match any device with a given
dev_t.
Fixes: a40cd7ef22fb ("platform/x86: think-lmi: Add WMI interface support on Lenovo platforms")
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://lore.kernel.org/r/20250625-dest-fix-v1-2-3a0f342312bb@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 11cba4793b95df3bc192149a6eb044f69aa0b99e ]
Devices under the firmware_attributes_class do not have unique a dev_t.
Therefore, device_unregister() should be used instead of
device_destroy(), since the latter may match any device with a given
dev_t.
Fixes: a34fc329b189 ("platform/x86: hp-bioscfg: bioscfg")
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://lore.kernel.org/r/20250625-dest-fix-v1-1-3a0f342312bb@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit eb617dd25ca176f3fee24f873f0fd60010773d67 ]
After retrieving WMI data blocks in sysfs callbacks, check for the
validity of them before dereferencing their content.
Reported-by: Jan Graczyk <jangraczyk@yahoo.ca>
Closes: https://lore.kernel.org/r/CAHk-=wgMiSKXf7SvQrfEnxVtmT=QVQPjJdNjfm3aXS7wc=rzTw@mail.gmail.com/
Fixes: e8a60aa7404b ("platform/x86: Introduce support for Systems Management Driver over WMI for Dell Systems")
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://lore.kernel.org/r/20250630-sysman-fix-v2-1-d185674d0a30@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit cf0b812500e64a7d5e2957abed38c3a97917b34f ]
It turns out that the Windows WMI-ACPI driver always enables/disables
WMI events regardless of whether they are marked as expensive or not.
This finding is further reinforced when reading the documentation of
the WMI_FUNCTION_CONTROL_CALLBACK callback used by Windows drivers
for enabling/disabling WMI devices:
The DpWmiFunctionControl routine enables or disables
notification of events, and enables or disables data
collection for data blocks that the driver registered
as expensive to collect.
Follow this behavior to fix the WMI event used for reporting hotkey
events on the Dell Latitude 5400 and likely many more devices.
Reported-by: Dmytro Bagrii <dimich.dmb@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220246
Tested-by: Dmytro Bagrii <dimich.dmb@gmail.com>
Fixes: 656f0961d126 ("platform/x86: wmi: Rework WCxx/WExx ACPI method handling")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20250619221440.6737-1-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d07143b507c51c04c091081627c5a130e9d3c517 ]
change error log to use correct bus number from main_mux_devs
instead of cpld_devs.
Fixes: 662f24826f95 ("platform/mellanox: Add support for new SN2201 system")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Vadim Pasternak <vadimp@nvidia.com>
Link: https://lore.kernel.org/r/20250622072921.4111552-2-alok.a.tiwari@oracle.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 173bbec6693f3f3f00dac144f3aa0cd62fb60d33 ]
same ID (103) was assigned to both GDC_BANK0_G_RSE_PIPE_CACHE_DATA0
and GDC_BANK0_G_RSE_PIPE_CACHE_DATA1. This could lead to incorrect
event mapping.
Updated the ID to 104 to ensure uniqueness.
Fixes: 423c3361855c ("platform/mellanox: mlxbf-pmc: Add support for BlueField-3")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: David Thompson <davthompson@nvidia.com>
Link: https://lore.kernel.org/r/20250619060502.3594350-1-alok.a.tiwari@oracle.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 109f4d29dade8ae5b4ac6325af9d1bc24b4230f8 ]
Fix warnings reported by sparse, related to incorrect type:
drivers/platform/mellanox/mlxbf-tmfifo.c:284:38: warning: incorrect type in assignment (different base types)
drivers/platform/mellanox/mlxbf-tmfifo.c:284:38: expected restricted __virtio32 [usertype] len
drivers/platform/mellanox/mlxbf-tmfifo.c:284:38: got unsigned long
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202404040339.S7CUIgf3-lkp@intel.com/
Fixes: 78034cbece79 ("platform/mellanox: mlxbf-tmfifo: Drop the Rx packet if no more descriptors")
Signed-off-by: David Thompson <davthompson@nvidia.com>
Link: https://lore.kernel.org/r/20250613214608.2250130-1-davthompson@nvidia.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 685f88c72a0c4d12d3bd2ff50286938f14486f85 upstream.
Address a Smatch static checker warning regarding an unchecked
dereference in the function call:
set_cdie_id(i, cluster_info, plat_info)
when plat_info is NULL.
Instead of addressing this one case, in general if plat_info is NULL
then it can cause other issues. For example in a two package system it
will give warning for duplicate sysfs entry as package ID will be always
zero for both packages when creating string for attribute group name.
plat_info is derived from TPMI ID TPMI_BUS_INFO, which is integral to
the core TPMI design. Therefore, it should not be NULL on a production
platform. Consequently, the module should fail to load if plat_info is
NULL.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/platform-driver-x86/aEKvGCLd1qmX04Tc@stanley.mountain/T/#u
Fixes: 8a54e2253e4c ("platform/x86/intel-uncore-freq: Uncore frequency control via TPMI")
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250606205300.2384494-1-srinivas.pandruvada@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
m16 R1"
commit e2468dc700743683e1d1793bbd855e2536fd3de2 upstream.
This reverts commit 5ff79cabb23a2f14d2ed29e9596aec908905a0e6.
Although the Alienware m16 R1 AMD model supports G-Mode, it actually has
a lower power ceiling than plain "performance" profile, which results in
lower performance.
Reported-by: Cihan Ozakca <cozakca@outlook.com>
Cc: stable@vger.kernel.org # 6.15.x
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://lore.kernel.org/r/20250611-m16-rev-v1-1-72d13bad03c9@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5808c34216954cd832bd4b8bc52dfa287049122b upstream.
It was reported that ideapad-laptop sometimes causes some recent (since
2024) Lenovo ThinkBook models shut down when:
- suspending/resuming
- closing/opening the lid
- (dis)connecting a charger
- reading/writing some sysfs properties, e.g., fan_mode, touchpad
- pressing down some Fn keys, e.g., Brightness Up/Down (Fn+F5/F6)
- (seldom) loading the kmod
The issue has existed since the launch day of such models, and there
have been some out-of-tree workarounds (see Link:) for the issue. One
disables some functionalities, while another one simply shortens
IDEAPAD_EC_TIMEOUT. The disabled functionalities have read_ec_data() in
their call chains, which calls schedule() between each poll.
It turns out that these models suffer from the indeterminacy of
schedule() because of their low tolerance for being polled too
frequently. Sometimes schedule() returns too soon due to the lack of
ready tasks, causing the margin between two polls to be too short.
In this case, the command is somehow aborted, and too many subsequent
polls (they poll for "nothing!") may eventually break the state machine
in the EC, resulting in a hard shutdown. This explains why shortening
IDEAPAD_EC_TIMEOUT works around the issue - it reduces the total number
of polls sent to the EC.
Even when it doesn't lead to a shutdown, frequent polls may also disturb
the ongoing operation and notably delay (+ 10-20ms) the availability of
EC response. This phenomenon is unlikely to be exclusive to the models
mentioned above, so dropping the schedule() manner should also slightly
improve the responsiveness of various models.
Fix these issues by migrating to usleep_range(150, 300). The interval is
chosen to add some margin to the minimal 50us and considering EC
responses are usually available after 150-2500us based on my test. It
should be enough to fix these issues on all models subject to the EC bug
without introducing latency on other models.
Tested on ThinkBook 14 G7+ ASP and solved both issues. No regression was
introduced in the test on a model without the EC bug (ThinkBook X IMH,
thanks Eric).
Link: https://github.com/ty2/ideapad-laptop-tb2024g6plus/commit/6c5db18c9e8109873c2c90a7d2d7f552148f7ad4
Link: https://github.com/ferstar/ideapad-laptop-tb/commit/42d1e68e5009529d31bd23f978f636f79c023e80
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218771
Fixes: 6a09f21dd1e2 ("ideapad: add ACPI helpers")
Cc: stable@vger.kernel.org
Tested-by: Felix Yan <felixonmars@archlinux.org>
Tested-by: Eric Long <i@hack3r.moe>
Tested-by: Jianfei Zhang <zhangjianfei3@gmail.com>
Tested-by: Mingcong Bai <jeffbai@aosc.io>
Tested-by: Minh Le <minhld139@gmail.com>
Tested-by: Sicheng Zhu <Emmet_Z@outlook.com>
Signed-off-by: Rong Zhang <i@rong.moe>
Link: https://lore.kernel.org/r/20250525201833.37939-1-i@rong.moe
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 53c762b47f726e4079a1f06f684bce2fc0d56fba upstream.
loongson_laptop_turn_{on,off}_backlight() are designed for controlling
the power of the backlight, but they aren't really used in the driver
previously.
Unify these two functions since they only differ in arguments passed to
ACPI method, and wire up loongson_laptop_backlight_update() to update
the power state of the backlight as well. Tested on the TongFang L860-T2
Loongson-3A5000 laptop.
Cc: stable@vger.kernel.org
Fixes: 6246ed09111f ("LoongArch: Add ACPI-based generic laptop driver")
Signed-off-by: Yao Zi <ziyao@disroot.org>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f78fb2576f22b0ba5297412a9aa7691920666c41 upstream.
Without correct unregisteration, ACPI notify handlers and the platform
drivers installed by generic_subdriver_init() will become dangling
references after removing the loongson_laptop module, triggering various
kernel faults when a hotkey is sent or at kernel shutdown.
Cc: stable@vger.kernel.org
Fixes: 6246ed09111f ("LoongArch: Add ACPI-based generic laptop driver")
Signed-off-by: Yao Zi <ziyao@disroot.org>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1205088fd0393bd9eae96b62bf1e4b9eb1b73edf upstream.
Previously during driver probe, 1 is unconditionally taken as current
brightness value and set to props.brightness, which will be considered
as the brightness before suspend and restored to EC on resume. Since a
brightness value of 1 almost never matches EC's state on coldboot (my
laptop's EC defaults to 80), this causes surprising changes of screen
brightness on the first time of resume after coldboot.
Let's get brightness from EC and take it as the current brightness on
probe of the laptop driver to avoid the surprising behavior. Tested on
TongFang L860-T2 Loongson-3A5000 laptop.
Cc: stable@vger.kernel.org
Fixes: 6246ed09111f ("LoongArch: Add ACPI-based generic laptop driver")
Signed-off-by: Yao Zi <ziyao@disroot.org>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit f4b0fa38d5fefe9aed6ed831f3bd3538c168ee19 ]
The dell_rbu driver will use memset() to clear the data held by each
packet when it is no longer needed (when the driver is unloaded, the
packet size is changed, etc).
The amount of memory that is cleared (before this patch) is the normal
packet size. However, the last packet in the list may be smaller.
Fix this to only clear the memory actually used by each packet, to prevent
it from writing past the end of data buffer.
Because the packet data buffers are allocated with __get_free_pages() (in
page-sized increments), this bug could only result in a buffer being
overwritten when a packet size larger than one page is used. The only user
of the dell_rbu module should be the Dell BIOS update program, which uses
a packet size of 4096, so no issues should be seen without the patch, it
just blocks the possiblity.
Fixes: 6c54c28e69f2 ("[PATCH] dell_rbu: new Dell BIOS update driver")
Signed-off-by: Stuart Hayes <stuart.w.hayes@gmail.com>
Link: https://lore.kernel.org/r/20250609184659.7210-5-stuart.w.hayes@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 61ce04601e0d8265ec6d2ffa6df5a7e1bce64854 ]
Pass the correct list head to list_for_each_entry*() when looping through
the packet list.
Without this patch, reading the packet data via sysfs will show the data
incorrectly (because it starts at the wrong packet), and clearing the
packet list will result in a NULL pointer dereference.
Fixes: d19f359fbdc6 ("platform/x86: dell_rbu: don't open code list_for_each_entry*()")
Signed-off-by: Stuart Hayes <stuart.w.hayes@gmail.com>
Link: https://lore.kernel.org/r/20250609184659.7210-3-stuart.w.hayes@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 93103d56650d7a38ed37ba4041578310f82776ae ]
If any of the tee init fails, pass up the errors and clear the tee_ctx
pointer. This will prevent cleaning up multiple times.
Fixes: ac052d8c08f9d ("platform/x86/amd/pmf: Add PMF TEE interface")
Suggested-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/20250512211154.2510397-3-superm1@kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20250522003457.1516679-3-superm1@kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d9db3a941270d92bbd1a6a6b54a10324484f2f2d ]
If setting up smart PC fails for any reason then this can lead to
a double free when unloading amd-pmf. This is because dev->buf was
freed but never set to NULL and is again freed in amd_pmf_remove().
To avoid subtle allocation bugs in failures leading to a double free
change all allocations into device managed allocations.
Fixes: 5b1122fc4995f ("platform/x86/amd/pmf: fix cleanup in amd_pmf_init_smart_pc()")
Link: https://lore.kernel.org/r/20250512211154.2510397-2-superm1@kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20250522003457.1516679-2-superm1@kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4dbd11796f3a8eb95647507befc41995458a4023 ]
The area of memory that contains the metrics table may contain garbage
when the cycle starts. This normally doesn't matter because the cycle
itself will populate it with valid data, however commit 9f5595d5f03fd
("platform/x86/amd: pmc: Require at least 2.5 seconds between HW sleep
cycles") started to use it during the check() phase. Depending upon
what garbage is in the table it's possible that the system will wait
2.5 seconds for even the first cycle, which will be visible to a user.
To prevent this from happening explicitly clear the table when logging
is started.
Fixes: 9f5595d5f03fd ("platform/x86/amd: pmc: Require at least 2.5 seconds between HW sleep cycles")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20250603132412.3555302-1-superm1@kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a9635ef0ca12e7914f42bfa7ca6a019f606c2817 ]
Pin C and D are used on C-to-C cable applications including docks,
and for USB-C adapters that convert from DP over USB-C to other
video standards.
Pin Assignment E is intended to be used with adapter from USB-C to DP
plugs or receptacles.
All Chromebook USB-C DFPs support DisplayPort Alternate Mode as the DP
Source with support for all 3 pin assignments. Pin Assignment E is required
in order to support if the user attaches a Pin E C-to-DP cable.
Without this, the displayport.c alt mode driver will error out of
dp_altmode_probe with an -ENODEV, as it cannot find a compatible matching
pin assignment between the DFP_D and UFP_D.
Fixes: dbb3fc0ffa95 ("platform/chrome: cros_ec_typec: Displayport support")
Signed-off-by: Benson Leung <bleung@chromium.org>
Reviewed-by: Jameson Thies <jthies@google.com>
Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
Link: https://lore.kernel.org/r/20250428174828.13939-1-bleung@chromium.org
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
The ARL requires that the GMA and NPU devices both be in D3Hot in order
for PC10 and S0iX to be achieved in S2idle. The original ARL-H/U addition
to the intel_pmc_core driver attempted to do this by switching them to D3
in the init and resume calls of the intel_pmc_core driver.
The problem is the ARL-H/U have a different NPU device and thus are not
being properly set and thus S0iX does not work properly in ARL-H/U. This
patch creates a new ARL-H specific device id that is correct and also
adds the D3 fixup to the suspend callback. This way if the PCI devies
drop from D3 to D0 after resume they can be corrected for the next
suspend. Thus there is no dropout in S0iX.
Fixes: bd820906ea9d ("platform/x86/intel/pmc: Add Arrow Lake U/H support to intel_pmc_core driver")
Signed-off-by: Todd Brandt <todd.e.brandt@intel.com>
Link: https://lore.kernel.org/r/a61f78be45c13f39e122dcc684b636f4b21e79a0.1747737446.git.todd.e.brandt@intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
A few, quite rare, WMI attributes have names that are not compatible with
filenames, e.g. "Intel VT for Directed I/O (VT-d)".
For these cases the '/' gets replaced with '\' for display, but doesn't
get switched again when doing the WMI access.
Fix this by keeping the original attribute name and using that for sending
commands to the BIOS
Fixes: a40cd7ef22fb ("platform/x86: think-lmi: Add WMI interface support on Lenovo platforms")
Signed-off-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://lore.kernel.org/r/20250520005027.3840705-1-mpearson-lenovo@squebb.ca
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
If user modifies the battery charge threshold an ACPI event is generated.
Confirmed with Lenovo FW team this is only generated on user event. As no
action is needed, ignore the event and prevent spurious kernel logs.
Reported-by: Derek Barbosa <debarbos@redhat.com>
Closes: https://lore.kernel.org/platform-driver-x86/7e9a1c47-5d9c-4978-af20-3949d53fb5dc@app.fastmail.com/T/#m5f5b9ae31d3fbf30d7d9a9d76c15fb3502dfd903
Signed-off-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20250517023348.2962591-1-mpearson-lenovo@squebb.ca
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
If the 'buf' array received from the user contains an empty string, the
'length' variable will be zero. Accessing the 'buf' array element with
index 'length - 1' will result in a buffer overflow.
Add a check for an empty string.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: e8a60aa7404b ("platform/x86: Introduce support for Systems Management Driver over WMI for Dell Systems")
Cc: stable@vger.kernel.org
Signed-off-by: Vladimir Moskovkin <Vladimir.Moskovkin@kaspersky.com>
Link: https://lore.kernel.org/r/39973642a4f24295b4a8fad9109c5b08@kaspersky.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
The S2110 has an additional set of media playback control keys enabled
by a hardware toggle button that switches the keys between "Application"
and "Player" modes. Toggling "Player" mode just shifts the scancode of
each hotkey up by 4.
Add defines for new scancodes, and a keymap and dmi id for the S2110.
Tested on a Fujitsu Lifebook S2110.
Signed-off-by: Valtteri Koskivuori <vkoskiv@gmail.com>
Acked-by: Jonathan Woithe <jwoithe@just42.net>
Link: https://lore.kernel.org/r/20250509184251.713003-1-vkoskiv@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
The wlan_ctrl_by_user detection was introduced by commit a50bd128f28c
("asus-wmi: record |
