| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
"i2c-core updates (collected by Wolfram):
- remove last user and unexport i2c_of_match_device()
- irq usage cleanup from Jiri
i2c-host updates (collected by Andi):
Refactoring and cleanups:
- octeon, cadence, i801, pasemi, mlxbf, bcm-iproc: general
refactorings
- octeon: remove 10-bit address support
Improvements:
- amd-asf: improved error handling
- designware: use guard(mutex)
- amd-asf, designware: update naming to follow latest specs
- cadence: fix cleanup path in probe
- i801: use MMIO and I/O mapping helpers to access registers
- pxa: handle error after clk_prepare_enable
New features:
- added i2c_10bit_addr_*_from_msg() and updated multiple drivers
- omap: added multiplexer state handling
- qcom-geni: update frequency configuration
- qup: introduce DMA usage policy
New hardware support:
- exynos: add support for Samsung exynos7870
- k1: add support for spacemit k1 (new driver)
- imx: add support for i.mx94 lpi2c
- rk3x: add support for rk3562
- designware: add support for Renesas RZ/N1D
Multiplexers:
- ltc4306, reg: fix assignment in platform_driver structure
at24 eeprom updates (collected by Bartosz):
- add two new compatible entries to the DT binding document
- drop of_match_ptr() and ACPI_PTR() macros"
* tag 'i2c-for-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (50 commits)
dt-bindings: i2c: snps,designware-i2c: describe Renesas RZ/N1D variant
irqdomain: i2c: Switch to irq_find_mapping()
i2c: iproc: Refactor prototype and remove redundant error checks
i2c: qcom-geni: Update i2c frequency table to match hardware guidance
i2c: mlxbf: Use readl_poll_timeout_atomic() for polling
i2c: pasemi: Add registers bits and switch to BIT()
i2c: k1: Initialize variable before use
i2c: spacemit: add support for SpacemiT K1 SoC
dt-bindings: i2c: spacemit: add support for K1 SoC
i2c: omap: Add support for setting mux
dt-bindings: i2c: omap: Add mux-states property
i2c: octeon: remove 10-bit addressing support
i2c: octeon: fix return commenting
i2c: i801: Use MMIO if available
i2c: i801: Switch to iomapped register access
i2c: i801: Improve too small kill wait time in i801_check_post
i2c: i801: Move i801_wait_intr and i801_wait_byte_done in the code
i2c: i801: Cosmetic improvements
i2c: cadence: Move reset_control_assert after pm_runtime_set_suspended in probe error path
i2c: cadence: Simplify using devm_clk_get_enabled()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- The series "powerpc/crash: use generic crashkernel reservation" from
Sourabh Jain changes powerpc's kexec code to use more of the generic
layers.
- The series "get_maintainer: report subsystem status separately" from
Vlastimil Babka makes some long-requested improvements to the
get_maintainer output.
- The series "ucount: Simplify refcounting with rcuref_t" from
Sebastian Siewior cleans up and optimizing the refcounting in the
ucount code.
- The series "reboot: support runtime configuration of emergency
hw_protection action" from Ahmad Fatoum improves the ability for a
driver to perform an emergency system shutdown or reboot.
- The series "Converge on using secs_to_jiffies() part two" from Easwar
Hariharan performs further migrations from msecs_to_jiffies() to
secs_to_jiffies().
- The series "lib/interval_tree: add some test cases and cleanup" from
Wei Yang permits more userspace testing of kernel library code, adds
some more tests and performs some cleanups.
- The series "hung_task: Dump the blocking task stacktrace" from Masami
Hiramatsu arranges for the hung_task detector to dump the stack of
the blocking task and not just that of the blocked task.
- The series "resource: Split and use DEFINE_RES*() macros" from Andy
Shevchenko provides some cleanups to the resource definition macros.
- Plus the usual shower of singleton patches - please see the
individual changelogs for details.
* tag 'mm-nonmm-stable-2025-03-30-18-23' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (77 commits)
mailmap: consolidate email addresses of Alexander Sverdlin
fs/procfs: fix the comment above proc_pid_wchan()
relay: use kasprintf() instead of fixed buffer formatting
resource: replace open coded variant of DEFINE_RES()
resource: replace open coded variants of DEFINE_RES_*_NAMED()
resource: replace open coded variant of DEFINE_RES_NAMED_DESC()
resource: split DEFINE_RES_NAMED_DESC() out of DEFINE_RES_NAMED()
samples: add hung_task detector mutex blocking sample
hung_task: show the blocker task if the task is hung on mutex
kexec_core: accept unaccepted kexec segments' destination addresses
watchdog/perf: optimize bytes copied and remove manual NUL-termination
lib/interval_tree: fix the comment of interval_tree_span_iter_next_gap()
lib/interval_tree: skip the check before go to the right subtree
lib/interval_tree: add test case for span iteration
lib/interval_tree: add test case for interval_tree_iter_xxx() helpers
lib/rbtree: add random seed
lib/rbtree: split tests
lib/rbtree: enable userland test suite for rbtree related data structure
checkpatch: describe --min-conf-desc-length
scripts/gdb/symbols: determine KASLR offset on s390
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply and reset updates from Sebastian Reichel:
"Power-supply core:
- remove unused set_charged infrastructure
- drop of_node from power_supply struct
Power-supply drivers:
- axp717: support devices without thermistors
- bq27xxx: support max design voltage for bq270x0 and bq27x10
- pcf50633: drop charger driver
- max1720x: add battery health support
- switch all power-supply devices from of_node to fwnode
- convert regmap users to maple tree register cache
- convert drivers to devm_kmemdup_array
- misc cleanups and fixes
Reset drivers:
- at91-sama5d2_shdwc: add sama7d65 support
* tag 'for-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (30 commits)
power: supply: mt6370: Remove redundant 'flush_workqueue()' calls
Revert "power: supply: bq27xxx: do not report bogus zero values"
power: supply: max77693: Fix wrong conversion of charge input threshold value
power: supply: pcf50633: Remove charger
power: supply: all: switch psy_cfg from of_node to fwnode
power: supply: core: get rid of of_node
power: reset: at91-sama5d2_shdwc: Add sama7d65 PMC
power: supply: smb347: convert to use maple tree register cache
power: supply: rt9455: convert to use maple tree register cache
power: supply: max1720x: convert to use maple tree register cache
power: supply: ltc4162l: convert to use maple tree register cache
power: supply: bq25980: convert to use maple tree register cache
power: supply: bq25890: convert to use maple tree register cache
power: supply: bq2515x: convert to use maple tree register cache
power: supply: bq24257: convert to use maple tree register cache
power: supply: bd99954: convert to use maple tree register cache
power: supply: Remove unused set_charged method
power: supply: ds2760: Remove unused ds2760_battery_set_charged
power: supply: core: Remove unused power_supply_set_battery_charged
power: supply: sc27xx: use devm_kmemdup_array()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"Maxim MAX77705:
- Added core MFD driver.
- Added charger driver.
- Added devicetree bindings for the charger and MFD core.
- Added Haptic controller support via the input subsystem.
- Added LED support.
- Added support to simple-mfd-i2c for fuel gauge and hwmon.
Samsung S2MPU05 (Exynos7870 PMIC):
- Added core MFD support.
- Added Regulator support for 21 LDOs and 5 BUCKs.
- Added devicetree bindings for regulators and the PMIC core.
TI TPS65215 & TPS65214:
- Added support to the existing TPS65219 driver.
- Added devicetree bindings.
STMicroelectronics STM32MP25:
- Added support to the stm32-timers MFD driver.
- Added devicetree bindings.
Congatec Board Controller (CGBC):
- Added HWMON support for internal sensors.
- Added support for the conga-SA8 module.
Microchip LAN969X:
- Enabled the at91-usart MFD driver for this architecture.
MediaTek MT6359:
- Added mfd_cell for mt6359-accdet to allow its driver to probe.
Other misc driver updates:
- AXP20X (AXP717): Added AXP717_TS_PIN_CFG register to writeable regs
for temperature sensor configuration.
- SM501: Switched to using BIT() macro to mitigate potential integer
overflows in GPIO functions.
- ENE KB3930: Added a NULL pointer check for off_gpios during probe
to prevent potential dereference.
- SYSCON: Added a check for invalid resource size to prevent issues
from DT misconfiguration.
- CGBC: Corrected signedness issues in cgbc_session_request
- intel_soc_pmic_chtdc_ti / intel_soc_pmic_crc: Removed unneeded
explicit assignment to REGCACHE_NONE.
- ipaq-micro / tps65010: Switched to using str_enable_disable()
helpers for clarity and potential size reduction.
- upboard-fpga: Removed unnecessary ACPI_PTR() annotation.
- max8997: Removed unused max8997_irq_exit() function, using devm_*
helpers instead.
- lp3943: Dropped unused #include <linux/pwm.h> from the header file.
- db8500-prcmu: Removed needless return statements in void APIs.
- qnap-mcu: Replaced commas with semicolons between expressions for
correctness.
- STA2X11: Removed the core MFD driver as the underlying platform
support was removed.
- EZX-PCAP: Removed the unused pcap_adc_sync function.
- PCF50633 (OpenMoko PMIC): Removed the entire driver (core, adc,
gpio, irq) as the underlying s3c24xx platform support was removed.
Devicetree updates:
- Converted fsl,mcu-mpc8349emitx binding to YAML
- Added qcom,msm8937-tcsr compatible
- Added microchip,sama7d65-flexcom compatible
- Added rockchip,rk3528-qos syscon compatible
- Added airoha,en7581-pbus-csr syscon compatible
- Added microchip,sama7d65-ddr3phy syscon compatible
- Added microchip,sama7d65-sfrbu syscon compatible"
* tag 'mfd-next-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (49 commits)
mfd: cgbc-core: Add support for conga-SA8
dt-bindings: mfd: syscon: Add microchip,sama7d65-sfrbu
dt-bindings: mfd: syscon: Add microchip,sama7d65-ddr3phy
mfd: cgbc: Add support for HWMON
dt-bindings: mfd: syscon: Add the pbus-csr node for Airoha EN7581 SoC
mfd: cgbc-core: Cleanup signedness in cgbc_session_request()
mfd: pcf50633: Remove remaining PCF50633 support
mfd: pcf50633: Remove unused platform IRQ code
mfd: pcF50633-gpio: Remove unused driver
mfd: pcf50633-adc: Remove unused driver
mfd: qnap-mcu: Convert commas to semicolons in qnap_mcu_exec()
mfd: mt6397-core: Add mfd_cell for mt6359-accdet
dt-bindings: mfd: syscon: Add rk3528 QoS register compatible
dt-bindings: mfd: atmel,sama5d2-flexcom: Add microchip,sama7d65-flexcom
mfd: ezx-pcap: Remove unused pcap_adc_sync
mfd: db8500-prcmu: Remove needless return in three void APIs
mfd: Remove STA2x11 core driver
mfd: max77620: Allow building as a module
mfd: ene-kb3930: Fix a potential NULL pointer dereference
dt-bindings: mfd: qcom,tcsr: Add compatible for MSM8937
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer cleanups from Thomas Gleixner:
"A treewide hrtimer timer cleanup
hrtimers are initialized with hrtimer_init() and a subsequent store to
the callback pointer. This turned out to be suboptimal for the
upcoming Rust integration and is obviously a silly implementation to
begin with.
This cleanup replaces the hrtimer_init(T); T->function = cb; sequence
with hrtimer_setup(T, cb);
The conversion was done with Coccinelle and a few manual fixups.
Once the conversion has completely landed in mainline, hrtimer_init()
will be removed and the hrtimer::function becomes a private member"
* tag 'timers-cleanups-2025-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (100 commits)
wifi: rt2x00: Switch to use hrtimer_update_function()
io_uring: Use helper function hrtimer_update_function()
serial: xilinx_uartps: Use helper function hrtimer_update_function()
ASoC: fsl: imx-pcm-fiq: Switch to use hrtimer_setup()
RDMA: Switch to use hrtimer_setup()
virtio: mem: Switch to use hrtimer_setup()
drm/vmwgfx: Switch to use hrtimer_setup()
drm/xe/oa: Switch to use hrtimer_setup()
drm/vkms: Switch to use hrtimer_setup()
drm/msm: Switch to use hrtimer_setup()
drm/i915/request: Switch to use hrtimer_setup()
drm/i915/uncore: Switch to use hrtimer_setup()
drm/i915/pmu: Switch to use hrtimer_setup()
drm/i915/perf: Switch to use hrtimer_setup()
drm/i915/gvt: Switch to use hrtimer_setup()
drm/i915/huc: Switch to use hrtimer_setup()
drm/amdgpu: Switch to use hrtimer_setup()
stm class: heartbeat: Switch to use hrtimer_setup()
i2c: Switch to use hrtimer_setup()
iio: Switch to use hrtimer_setup()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-mergewindow
i2c-host updates for v6.15
Refactoring and cleanups
- octeon, cadence, i801, pasemi, mlxbf, bcm-iproc: general
refactorings
- octeon: remove 10-bit address support
Improvements
- amd-asf: improved error handling
- designware: use guard(mutex)
- amd-asf, designware: update naming to follow latest specs
- cadence: fix cleanup path in probe
- i801: use MMIO and I/O mapping helpers to access registers
- pxa: handle error after clk_prepare_enable
New features
- added i2c_10bit_addr_*_from_msg() and updated multiple drivers
- omap: added multiplexer state handling
- qcom-geni: update frequency configuration
- qup: introduce DMA usage policy
New hardware support
- exynos: add support for Samsung exynos7870
- k1: add support for spacemit k1 (new driver)
- imx: add support for i.mx94 lpi2c
- rk3x: add support for rk3562
Multiplexers
- ltc4306, reg: fix assignment in platform_driver structure
|
|
Commit b35108a51cf7 ("jiffies: Define secs_to_jiffies()") introduced
secs_to_jiffies(). As the value here is a multiple of 1000, use
secs_to_jiffies() instead of msecs_to_jiffies() to avoid the
multiplication
This is converted using scripts/coccinelle/misc/secs_to_jiffies.cocci with
the following Coccinelle rules:
@depends on patch@
expression E;
@@
-msecs_to_jiffies
+secs_to_jiffies
(E
- * \( 1000 \| MSEC_PER_SEC \)
)
Link: https://lkml.kernel.org/r/20250225-converge-secs-to-jiffies-part-two-v3-10-a43967e36c88@linux.microsoft.com
Signed-off-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Cc: Carlos Maiolino <cem@kernel.org>
Cc: Carlos Maiolino <cmaiolino@redhat.com>
Cc: Chris Mason <clm@fb.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Damien Le Maol <dlemoal@kernel.org>
Cc: "Darrick J. Wong" <djwong@kernel.org>
Cc: David Sterba <dsterba@suse.com>
Cc: Dick Kennedy <dick.kennedy@broadcom.com>
Cc: Dongsheng Yang <dongsheng.yang@easystack.cn>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Frank Li <frank.li@nxp.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Cc: Ilpo Jarvinen <ilpo.jarvinen@linux.intel.com>
Cc: Ilya Dryomov <idryomov@gmail.com>
Cc: James Bottomley <james.bottomley@HansenPartnership.com>
Cc: James Smart <james.smart@broadcom.com>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Julia Lawall <julia.lawall@inria.fr>
Cc: Kalesh Anakkur Purayil <kalesh-anakkur.purayil@broadcom.com>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: Marc Kleine-Budde <mkl@pengutronix.de>
Cc: Mark Brown <broonie@kernel.org>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Nicolas Palix <nicolas.palix@imag.fr>
Cc: Niklas Cassel <cassel@kernel.org>
Cc: Oded Gabbay <ogabbay@kernel.org>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Sebastian Reichel <sre@kernel.org>
Cc: Selvin Thyparampil Xavier <selvin.xavier@broadcom.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Shyam-sundar S-k <Shyam-sundar.S-k@amd.com>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
'destroy_workqueue()' already drains the queue before destroying it, so
there is no need to flush it explicitly.
Remove the redundant 'flush_workqueue()' calls.
This was generated with coccinelle:
@@
expression E;
@@
- flush_workqueue(E);
destroy_workqueue(E);
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Link: https://lore.kernel.org/r/20250312073729.1430053-1-nichen@iscas.ac.cn
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Commit f3974aca381e ("power: supply: bq27xxx: do not report bogus zero
values") breaks property reporting on chips which are reporting normal
values. During testing, excessive emphasis was evidently placed on the
chip with non-working conditions, and not enough testing was done on a
battery that had normal state.
A correct fix will be submitted in a separate patch.
Reported-by: H. Nikolaus Schaller <hns@goldelico.com>
Closes: https://lore.kernel.org/linux-pm/CB5B8FE7-D619-4D30-BD2D-58B6CEF83D46@goldelico.com/
Fixes: f3974aca381e ("power: supply: bq27xxx: do not report bogus zero values")
Signed-off-by: Sicelo A. Mhlongo <absicsz@gmail.com>
Link: https://lore.kernel.org/r/20250312121712.146109-2-absicsz@gmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
The charge input threshold voltage register on the MAX77693 PMIC accepts
four values: 0x0 for 4.3v, 0x1 for 4.7v, 0x2 for 4.8v and 0x3 for 4.9v.
Due to an oversight, the driver calculated the values for 4.7v and above
starting from 0x0, rather than from 0x1 ([(4700000 - 4700000) / 100000]
gives 0).
Add 1 to the calculation to ensure that 4.7v is converted to a register
value of 0x1 and that the other two voltages are converted correctly as
well.
Fixes: 87c2d9067893 ("power: max77693: Add charger driver for Maxim 77693")
Signed-off-by: Artur Weber <aweber.kernel@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250316-max77693-charger-input-threshold-fix-v1-1-2b037d0ac722@gmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
The pcf50633 was used as part of the OpenMoko devices but
the support for its main chip was recently removed in:
commit 61b7f8920b17 ("ARM: s3c: remove all s3c24xx support")
See https://lore.kernel.org/all/Z8z236h4B5A6Ki3D@gallifrey/
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://lore.kernel.org/r/20250311014959.743322-7-linux@treblig.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
When registering a power-supply device, either a of_node or the more
recent fwnode can be supplied. Since fwnode can also contain an of_node,
let's try to get rid of it.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20250225-psy-core-convert-to-fwnode-v1-4-d5e4369936bb@collabora.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
This removes .of_node from 'struct power_supply', since there
is already a copy in .dev.of_node and there is no need to have
two copies.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20250225-psy-core-convert-to-fwnode-v1-1-d5e4369936bb@collabora.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Add sama7d65-pmc compatible string to the list of valid PMC IDs.
Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com>
Link: https://lore.kernel.org/r/c5fa1d88a072d79db4f1a6b99ad69632a83e8f8d.1740671156.git.Ryan.Wanner@microchip.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache.
Signed-off-by: Bo Liu <liubo03@inspur.com>
Link: https://lore.kernel.org/r/20250228080236.2759-10-liubo03@inspur.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache.
Signed-off-by: Bo Liu <liubo03@inspur.com>
Link: https://lore.kernel.org/r/20250228080236.2759-9-liubo03@inspur.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache.
Signed-off-by: Bo Liu <liubo03@inspur.com>
Link: https://lore.kernel.org/r/20250228080236.2759-8-liubo03@inspur.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache.
Signed-off-by: Bo Liu <liubo03@inspur.com>
Link: https://lore.kernel.org/r/20250228080236.2759-7-liubo03@inspur.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache.
Signed-off-by: Bo Liu <liubo03@inspur.com>
Link: https://lore.kernel.org/r/20250228080236.2759-6-liubo03@inspur.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache.
Signed-off-by: Bo Liu <liubo03@inspur.com>
Link: https://lore.kernel.org/r/20250228080236.2759-5-liubo03@inspur.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache.
Signed-off-by: Bo Liu <liubo03@inspur.com>
Link: https://lore.kernel.org/r/20250228080236.2759-4-liubo03@inspur.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache.
Signed-off-by: Bo Liu <liubo03@inspur.com>
Link: https://lore.kernel.org/r/20250228080236.2759-3-liubo03@inspur.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache.
Signed-off-by: Bo Liu <liubo03@inspur.com>
Link: https://lore.kernel.org/r/20250228080236.2759-2-liubo03@inspur.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
With power_supply_set_battery_charged() deleted in the previous
patch, there's no one left to call the set_charged method.
The only implemented is in ds2760, unwire it and delete the
associated functions and data.
(Arguably it might be time to delete ds2760 since I don't
think there are any users left)
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://lore.kernel.org/r/20250307230225.128775-3-linux@treblig.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
power_supply_set_battery_charged() has been unused since 2019's
commit 0f884f8a090e ("ARM: pxa: remove raumfeld board files and
defconfig")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://lore.kernel.org/r/20250307230225.128775-2-linux@treblig.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Convert to use devm_kmemdup_array() which is more robust.
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Link: https://lore.kernel.org/r/20250221165333.2780888-9-raag.jadav@intel.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Allow a boolean property of "x-powers,no-thermistor" to specify devices
where the ts pin is not connected to anything. This works around an
issue found with some devices where the efuse is not programmed
correctly from the factory or when the register gets set erroneously.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Tested-by: Philippe Simons <simons.philippe@gmail.com>
Link: https://lore.kernel.org/r/20250204155835.161973-4-macroalpha82@gmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Add driver for Maxim 77705 switch-mode charger.
It providing power supply class information to userspace.
The driver is configured through DTS (battery and system related
settings).
Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20250123-starqltechn_integration_upstream-v17-3-8b06685b6612@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Commit 243f8ffc883a1 ("power: supply: bq27xxx_battery: Notify also about
status changes") intended to notify userspace when the status changes,
based on the flags register. However, the cached state is updated too
early, before the flags are tested for any changes. Remove the premature
update.
Fixes: 243f8ffc883a1 ("power: supply: bq27xxx_battery: Notify also about status changes")
Signed-off-by: Sicelo A. Mhlongo <absicsz@gmail.com>
Link: https://lore.kernel.org/r/20241125152945.47937-1-absicsz@gmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
On the bq27x00 and bq27x10 variants, a number of conditions may reset the value
stored in the NAC register. This will cause capacity, energy, and charge to
report the value 0, even when the battery is full. On the other hand, the chip
also provides a flag, EDVF, which accurately detects the true battery empty
condition, when capacity, charge, and energy are really 0. Therefore, discard
readings for these properties if their value is 0 while EDVF is unset.
Tested on the Nokia N900 with bq27200.
Signed-off-by: Sicelo A. Mhlongo <absicsz@gmail.com>
Link: https://lore.kernel.org/r/20250207220605.106768-1-absicsz@gmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Report VOLTAGE_MAX_DESIGN for the bq27x00 and bq27x10 fuel gauges. Per the
datasheet, this value is stored in the Charge Termination Voltage Settings
(QV0 and QV1) of the Pack Configuration register.
Tested on the Nokia N900 with bq27200.
Signed-off-by: Sicelo A. Mhlongo <absicsz@gmail.com>
Link: https://lore.kernel.org/r/20250207211521.103357-1-absicsz@gmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Add health property, which checks that temperature, voltage and current are
within limits for the battery. Limits can be programmed in non-volatile
memory.
Signed-off-by: Dimitri Fedrau <dimitri.fedrau@liebherr.com>
Link: https://lore.kernel.org/r/20250204-max1720x_health-v1-1-97ebbe4a0bc5@liebherr.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.
Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.
Patch was created by using Coccinelle.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Zack Rusin <zack.rusin@broadcom.com>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/all/75ef5206f52f194b9c51653628cd2d0b083a482f.1738746904.git.namcao@linutronix.de
|
|
hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.
Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.
Patch was created by using Coccinelle.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Zack Rusin <zack.rusin@broadcom.com>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/all/fa0bf7376ce8f124c8285a52d9f55d0ab4c42988.1738746904.git.namcao@linutronix.de
|
|
There is a typo in a dev_warn message:
- reqested -> requested
Fix it via codespell.
Signed-off-by: Andrew Kreimer <algonell@gmail.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20250206083405.10286-1-algonell@gmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
mesaurment -> measurement
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250213-max1720x-typo-v1-1-9c88611cac34@linaro.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Get matching data in one step by switching to use i2c_get_match_data().
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
Correct the fault handling for the AXP717 by changing the i2c write
from regmap_update_bits() to regmap_write_bits(). The update bits
function does not work properly on a RW1C register where we must
write a 1 back to an existing register to clear it.
Additionally, as part of this testing I confirmed the behavior of
errors reappearing, so remove comment about assumptions.
Fixes: 6625767049c2 ("power: supply: axp20x_battery: add support for AXP717")
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20250131231455.153447-2-macroalpha82@gmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Since commit 6037802bbae8 ("power: supply: core: implement extension API")
there is the following ABBA deadlock (simplified) between the LED trigger
code and the power-supply code:
1) When registering a power-supply class device, power_supply_register()
calls led_trigger_register() from power_supply_create_triggers() in
a scoped_guard(rwsem_read, &psy->extensions_sem) context.
led_trigger_register() then in turn takes a LED subsystem lock.
So here we have the following locking order:
* Read-lock extensions_sem
* Lock LED subsystem lock(s)
2) When registering a LED class device, with its default trigger set
to a power-supply LED trigger (which has already been registered)
The LED class code calls power_supply_led_trigger_activate() when
setting up the default trigger. power_supply_led_trigger_activate()
calls power_supply_get_property() to determine the initial value of
to assign to the LED and that read-locks extensions_sem. So now we
have the following locking order:
* Lock LED subsystem lock(s)
* Read-lock extensions_sem
Fixing this is easy, there is no need to hold the extensions_sem when
calling power_supply_create_triggers() since all triggers are always
created rather then checking for the presence of certain attributes as
power_supply_add_hwmon_sysfs() does. Move power_supply_create_triggers()
out of the guard block to fix this.
Here is the lockdep report fixed by this change:
[ 31.249343] ======================================================
[ 31.249378] WARNING: possible circular locking dependency detected
[ 31.249413] 6.13.0-rc6+ #251 Tainted: G C E
[ 31.249440] ------------------------------------------------------
[ 31.249471] (udev-worker)/553 is trying to acquire lock:
[ 31.249501] ffff892adbcaf660 (&psy->extensions_sem){.+.+}-{4:4}, at: power_supply_get_property.part.0+0x22/0x150
[ 31.249574]
but task is already holding lock:
[ 31.249603] ffff892adbc0bad0 (&led_cdev->trigger_lock){+.+.}-{4:4}, at: led_trigger_set_default+0x34/0xe0
[ 31.249657]
which lock already depends on the new lock.
[ 31.249696]
the existing dependency chain (in reverse order) is:
[ 31.249735]
-> #2 (&led_cdev->trigger_lock){+.+.}-{4:4}:
[ 31.249778] down_write+0x3b/0xd0
[ 31.249803] led_trigger_set_default+0x34/0xe0
[ 31.249833] led_classdev_register_ext+0x311/0x3a0
[ 31.249863] input_leds_connect+0x1dc/0x2a0
[ 31.249889] input_attach_handler.isra.0+0x75/0x90
[ 31.249921] input_register_device.cold+0xa1/0x150
[ 31.249955] hidinput_connect+0x8a2/0xb80
[ 31.249982] hid_connect+0x582/0x5c0
[ 31.250007] hid_hw_start+0x3f/0x60
[ 31.250030] hid_device_probe+0x122/0x1f0
[ 31.250053] really_probe+0xde/0x340
[ 31.250080] __driver_probe_device+0x78/0x110
[ 31.250105] driver_probe_device+0x1f/0xa0
[ 31.250132] __device_attach_driver+0x85/0x110
[ 31.250160] bus_for_each_drv+0x78/0xc0
[ 31.250184] __device_attach+0xb0/0x1b0
[ 31.250207] bus_probe_device+0x94/0xb0
[ 31.250230] device_add+0x64a/0x860
[ 31.250252] hid_add_device+0xe5/0x240
[ 31.250279] usbhid_probe+0x4dc/0x620
[ 31.250303] usb_probe_interface+0xe4/0x2a0
[ 31.250329] really_probe+0xde/0x340
[ 31.250353] __driver_probe_device+0x78/0x110
[ 31.250377] driver_probe_device+0x1f/0xa0
[ 31.250404] __device_attach_driver+0x85/0x110
[ 31.250431] bus_for_each_drv+0x78/0xc0
[ 31.250455] __device_attach+0xb0/0x1b0
[ 31.250478] bus_probe_device+0x94/0xb0
[ 31.250501] device_add+0x64a/0x860
[ 31.250523] usb_set_configuration+0x606/0x8a0
[ 31.250552] usb_generic_driver_probe+0x3e/0x60
[ 31.250579] usb_probe_device+0x3d/0x120
[ 31.250605] really_probe+0xde/0x340
[ 31.250629] __driver_probe_device+0x78/0x110
[ 31.250653] driver_probe_device+0x1f/0xa0
[ 31.250680] __device_attach_driver+0x85/0x110
[ 31.250707] bus_for_each_drv+0x78/0xc0
[ 31.250731] __device_attach+0xb0/0x1b0
[ 31.250753] bus_probe_device+0x94/0xb0
[ 31.250776] device_add+0x64a/0x860
[ 31.250798] usb_new_device.cold+0x141/0x38f
[ 31.250828] hub_event+0x1166/0x1980
[ 31.250854] process_one_work+0x20f/0x580
[ 31.250879] worker_thread+0x1d1/0x3b0
[ 31.250904] kthread+0xee/0x120
[ 31.250926] ret_from_fork+0x30/0x50
[ 31.250954] ret_from_fork_asm+0x1a/0x30
[ 31.250982]
-> #1 (triggers_list_lock){++++}-{4:4}:
[ 31.251022] down_write+0x3b/0xd0
[ 31.251045] led_trigger_register+0x40/0x1b0
[ 31.251074] power_supply_register_led_trigger+0x88/0x150
[ 31.251107] power_supply_create_triggers+0x55/0xe0
[ 31.251135] __power_supply_register.part.0+0x34e/0x4a0
[ 31.251164] devm_power_supply_register+0x70/0xc0
[ 31.251190] bq27xxx_battery_setup+0x1a1/0x6d0 [bq27xxx_battery]
[ 31.251235] bq27xxx_battery_i2c_probe+0xe5/0x17f [bq27xxx_battery_i2c]
[ 31.251272] i2c_device_probe+0x125/0x2b0
[ 31.251299] really_probe+0xde/0x340
[ 31.251324] __driver_probe_device+0x78/0x110
[ 31.251348] driver_probe_device+0x1f/0xa0
[ 31.251375] __driver_attach+0xba/0x1c0
[ 31.251398] bus_for_each_dev+0x6b/0xb0
[ 31.251421] bus_add_driver+0x111/0x1f0
[ 31.251445] driver_register+0x6e/0xc0
[ 31.251470] i2c_register_driver+0x41/0xb0
[ 31.251498] do_one_initcall+0x5e/0x3a0
[ 31.251522] do_init_module+0x60/0x220
[ 31.251550] __do_sys_init_module+0x15f/0x190
[ 31.251575] do_syscall_64+0x93/0x180
[ 31.251598] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ 31.251629]
-> #0 (&psy->extensions_sem){.+.+}-{4:4}:
[ 31.251668] __lock_acquire+0x13ce/0x21c0
[ 31.251694] lock_acquire+0xcf/0x2e0
[ 31.251719] down_read+0x3e/0x170
[ 31.251741] power_supply_get_property.part.0+0x22/0x150
[ 31.251774] power_supply_update_leds+0x8d/0x230
[ 31.251804] power_supply_led_trigger_activate+0x18/0x20
[ 31.251837] led_trigger_set+0x1fc/0x300
[ 31.251863] led_trigger_set_default+0x90/0xe0
[ 31.251892] led_classdev_register_ext+0x311/0x3a0
[ 31.251921] devm_led_classdev_multicolor_register_ext+0x6e/0xb80 [led_class_multicolor]
[ 31.251969] ktd202x_probe+0x464/0x5c0 [leds_ktd202x]
[ 31.252002] i2c_device_probe+0x125/0x2b0
[ 31.252027] really_probe+0xde/0x340
[ 31.252052] __driver_probe_device+0x78/0x110
[ 31.252076] driver_probe_device+0x1f/0xa0
[ 31.252103] __driver_attach+0xba/0x1c0
[ 31.252125] bus_for_each_dev+0x6b/0xb0
[ 31.252148] bus_add_driver+0x111/0x1f0
[ 31.252172] driver_register+0x6e/0xc0
[ 31.252197] i2c_register_driver+0x41/0xb0
[ 31.252225] do_one_initcall+0x5e/0x3a0
[ 31.252248] do_init_module+0x60/0x220
[ 31.252274] __do_sys_init_module+0x15f/0x190
[ 31.253986] do_syscall_64+0x93/0x180
[ 31.255826] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ 31.257614]
other info that might help us debug this:
[ 31.257619] Chain exists of:
&psy->extensions_sem --> triggers_list_lock --> &led_cdev->trigger_lock
[ 31.257630] Possible unsafe locking scenario:
[ 31.257632] CPU0 CPU1
[ 31.257633] ---- ----
[ 31.257634] lock(&led_cdev->trigger_lock);
[ 31.257637] lock(triggers_list_lock);
[ 31.257640] lock(&led_cdev->trigger_lock);
[ 31.257643] rlock(&psy->extensions_sem);
[ 31.257646]
*** DEADLOCK ***
[ 31.289433] 4 locks held by (udev-worker)/553:
[ 31.289443] #0: ffff892ad9658108 (&dev->mutex){....}-{4:4}, at: __driver_attach+0xaf/0x1c0
[ 31.289463] #1: ffff892adbc0bbc8 (&led_cdev->led_access){+.+.}-{4:4}, at: led_classdev_register_ext+0x1c7/0x3a0
[ 31.289476] #2: ffffffffad0e30b0 (triggers_list_lock){++++}-{4:4}, at: led_trigger_set_default+0x2c/0xe0
[ 31.289487] #3: ffff892adbc0bad0 (&led_cdev->trigger_lock){+.+.}-{4:4}, at: led_trigger_set_default+0x34/0xe0
Fixes: 6037802bbae8 ("power: supply: core: implement extension API")
Cc: Thomas Weißschuh <linux@weissschuh.net>
Cc: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20250130140035.20636-1-hdegoede@redhat.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Size of variable sd_gain equals four bytes - DA9150_QIF_SD_GAIN_SIZE.
Size of variable shunt_val equals two bytes - DA9150_QIF_SHUNT_VAL_SIZE.
The expression sd_gain * shunt_val is currently being evaluated using
32-bit arithmetic. So during the multiplication an overflow may occur.
As the value of type 'u64' is used as storage for the eventual result, put
ULL variable at the first position of each expression in order to give the
compiler complete information about the proper arithmetic to use. According
to C99 the guaranteed width for a variable of type 'unsigned long long' >=
64 bits.
Remove the explicit cast to u64 as it is meaningless.
Just for the sake of consistency, perform the similar trick with another
expression concerning 'iavg'.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: a419b4fd9138 ("power: Add support for DA9150 Fuel-Gauge")
Signed-off-by: Andrey Vatoropin <a.vatoropin@crpt.ru>
Link: https://lore.kernel.org/r/20250130090030.53422-1-a.vatoropin@crpt.ru
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply and reset updates from Sebastian Reichel:
"Power-supply core:
- introduce power supply extensions, which allows adding properties
to a power supply device from a separate driver. This will be used
initially to extend the generic ACPI charger/battery driver with
vendor extensions for charge thresholds.
- convert all drivers from power_supply_for_each_device to new
|
