| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
commit 9697ca0d53e3db357be26d2414276143c4a2cd49 upstream.
Improve the usability of the unit_add sysfs attribute by ensuring that
the associated FCP LUN scan processing is completed synchronously. This
enables configuration tooling to consistently determine the end of the
scan process to allow for serialization of follow-on actions.
While the scan process associated with unit_add typically completes
synchronously, it is deferred to an asynchronous background process if
unit_add is used before initial remote port scanning has completed. This
occurs when unit_add is used immediately after setting the associated FCP
device online.
To ensure synchronous unit_add processing, wait for remote port scanning
to complete before initiating the FCP LUN scan.
Cc: stable@vger.kernel.org
Reviewed-by: M Nikhil <nikh1092@linux.ibm.com>
Reviewed-by: Nihar Panda <niharp@linux.ibm.com>
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Nihar Panda <niharp@linux.ibm.com>
Link: https://lore.kernel.org/r/20250603182252.2287285-2-niharp@linux.ibm.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c3116e62ddeff79cae342147753ce596f01fcf06 upstream.
Once the discipline is associated with the device, deleting the device
takes care of decrementing the module's refcount. Doing it manually on
this error path causes refcount to artificially decrease on each error
while it should just stay the same.
Fixes: c020d722b110 ("s390/dasd: fix panic during offline processing")
Signed-off-by: Miroslav Franc <mfranc@suse.cz>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Link: https://lore.kernel.org/r/20240209124522.3697827-3-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
[Minor context change fixed]
Signed-off-by: Feng Liu <Feng.Liu3@windriver.com>
Signed-off-by: He Zhe <Zhe.He@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 32ae4a2992529e2c7934e422035fad1d9b0f1fb5 ]
In some environments, the SCLP firmware interface used to query a
CHPID's configured state is not supported. On these environments,
rapidly reading the corresponding sysfs attribute produces inconsistent
results:
$ cat /sys/devices/css0/chp0.00/configure
cat: /sys/devices/css0/chp0.00/configure: Operation not supported
$ cat /sys/devices/css0/chp0.00/configure
3
This occurs for example when Linux is run as a KVM guest. The
inconsistency is a result of CIO using cached results for generating
the value of the "configure" attribute while failing to handle the
situation where no data was returned by SCLP.
Fix this by not updating the cache-expiration timestamp when SCLP
returns no data. With the fix applied, the system response is
consistent:
$ cat /sys/devices/css0/chp0.00/configure
cat: /sys/devices/css0/chp0.00/configure: Operation not supported
$ cat /sys/devices/css0/chp0.00/configure
cat: /sys/devices/css0/chp0.00/configure: Operation not supported
Reviewed-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Tested-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit dee3df68ab4b00fff6bdf9fc39541729af37307c upstream.
According to the VT220 specification the possible character combinations
sent on RETURN are only CR or CRLF [0].
The Return key sends either a CR character (0/13) or a CR
character (0/13) and an LF character (0/10), depending on the
set/reset state of line feed/new line mode (LNM).
The sclp/vt220 driver however uses LFCR. This can confuse tools, for
example the kunit runner.
Link: https://vt100.net/docs/vt220-rm/chapter3.html#S3.2
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Link: https://lore.kernel.org/r/20241014-s390-kunit-v1-2-941defa765a6@linutronix.de
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit dabdfac0e85c8c1e811b10c08742f49285e78a17 ]
The zFCP/NVMe standalone dumper is supposed to release the dump save area
resource as soon as possible but might fail to do so, for instance, if it
crashes. To avoid this situation, register a reboot notifier and ensure
the dump save area resource is released on reboot or power down.
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Stable-dep-of: 0b18c852cc6f ("tracing: Have saved_cmdlines arrays all in one allocation")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7449ca87312a5b0390b765be65a126e6e5451026 ]
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
See commit 7dd541a3fb34 ("s390: no need to check return value of debugfs_create functions").
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Stable-dep-of: 0b18c852cc6f ("tracing: Have saved_cmdlines arrays all in one allocation")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit c1023f5634b9bfcbfff0dc200245309e3cde9b54 upstream.
bitmap_size() is a pretty generic name and one may want to use it for
a generic bitmap API function. At the same time, its logic is not
"generic", i.e. it's not just `nbits -> size of bitmap in bytes`
converter as it would be expected from its name.
Add the prefix 'idset_' used throughout the file where the function
resides.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Acked-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a37fbe666c016fd89e4460d0ebfcea05baba46dc upstream.
The number of times yet another open coded
`BITS_TO_LONGS(nbits) * sizeof(long)` can be spotted is huge.
Some generic helper is long overdue.
Add one, bitmap_size(), but with one detail.
BITS_TO_LONGS() uses DIV_ROUND_UP(). The latter works well when both
divident and divisor are compile-time constants or when the divisor
is not a pow-of-2. When it is however, the compilers sometimes tend
to generate suboptimal code (GCC 13):
48 83 c0 3f add $0x3f,%rax
48 c1 e8 06 shr $0x6,%rax
48 8d 14 c5 00 00 00 00 lea 0x0(,%rax,8),%rdx
%BITS_PER_LONG is always a pow-2 (either 32 or 64), but GCC still does
full division of `nbits + 63` by it and then multiplication by 8.
Instead of BITS_TO_LONGS(), use ALIGN() and then divide by 8. GCC:
8d 50 3f lea 0x3f(%rax),%edx
c1 ea 03 shr $0x3,%edx
81 e2 f8 ff ff 1f and $0x1ffffff8,%edx
Now it shifts `nbits + 63` by 3 positions (IOW performs fast division
by 8) and then masks bits[2:0]. bloat-o-meter:
add/remove: 0/0 grow/shrink: 20/133 up/down: 156/-773 (-617)
Clang does it better and generates the same code before/after starting
from -O1, except that with the ALIGN() approach it uses %edx and thus
still saves some bytes:
add/remove: 0/0 grow/shrink: 9/133 up/down: 18/-538 (-520)
Note that we can't expand DIV_ROUND_UP() by adding a check and using
this approach there, as it's used in array declarations where
expressions are not allowed.
Add this helper to tools/ as well.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Acked-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7db4042336580dfd75cb5faa82c12cd51098c90b upstream.
Extent Space Efficient (ESE) or thin provisioned volumes need to be
formatted on demand during usual IO processing.
The dasd_ese_needs_format function checks for error codes that signal
the non existence of a proper track format.
The check for incorrect length is to imprecise since other error cases
leading to transport of insufficient data also have this flag set.
This might lead to data corruption in certain error cases for example
during a storage server warmstart.
Fix by removing the check for incorrect length and replacing by
explicitly checking for invalid track format in transport mode.
Also remove the check for file protected since this is not a valid
ESE handling case.
Cc: stable@vger.kernel.org # 5.3+
Fixes: 5e2b17e712cf ("s390/dasd: Add dynamic formatting support for ESE volumes")
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Link: https://lore.kernel.org/r/20240812125733.126431-3-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit bf365071ea92b9579d5a272679b74052a5643e35 ]
When a task waiting for completion of a Store Data operation is
interrupted, an attempt is made to halt this operation. If this attempt
fails due to a hardware or firmware problem, there is a chance that the
SCLP facility might store data into buffers referenced by the original
operation at a later time.
Handle this situation by not releasing the referenced data buffers if
the halt attempt fails. For current use cases, this might result in a
leak of few pages of memory in case of a rare hardware/firmware
malfunction.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6434b33faaa063df500af355ee6c3942e0f8d982 ]
If sclp_init() fails it only partially cleans up: if there are multiple
failing calls to sclp_init() sclp_state_change_event will be added several
times to sclp_reg_list, which results in the following warning:
------------[ cut here ]------------
list_add double add: new=000003ffe1598c10, prev=000003ffe1598bf0, next=000003ffe1598c10.
WARNING: CPU: 0 PID: 1 at lib/list_debug.c:35 __list_add_valid_or_report+0xde/0xf8
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.10.0-rc3
Krnl PSW : 0404c00180000000 000003ffe0d6076a (__list_add_valid_or_report+0xe2/0xf8)
R:0 T:1 IO:0 EX:0 Key:0 M:1 W:0 P:0 AS:3 CC:0 PM:0 RI:0 EA:3
...
Call Trace:
[<000003ffe0d6076a>] __list_add_valid_or_report+0xe2/0xf8
([<000003ffe0d60766>] __list_add_valid_or_report+0xde/0xf8)
[<000003ffe0a8d37e>] sclp_init+0x40e/0x450
[<000003ffe00009f2>] do_one_initcall+0x42/0x1e0
[<000003ffe15b77a6>] do_initcalls+0x126/0x150
[<000003ffe15b7a0a>] kernel_init_freeable+0x1ba/0x1f8
[<000003ffe0d6650e>] kernel_init+0x2e/0x180
[<000003ffe000301c>] __ret_from_fork+0x3c/0x60
[<000003ffe0d759ca>] ret_from_fork+0xa/0x30
Fix this by removing sclp_state_change_event from sclp_reg_list when
sclp_init() fails.
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1d8c270de5eb74245d72325d285894a577a945d9 ]
Wipe sensitive data from stack also if the copy_to_user() fails.
Suggested-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Ingo Franzki <ifranzki@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit d4f9d5a99a3fd1b1c691b7a1a6f8f3f25f4116c9 upstream.
A system crash like this
Failing address: 200000cb7df6f000 TEID: 200000cb7df6f403
Fault in home space mode while using kernel ASCE.
AS:00000002d71bc007 R3:00000003fe5b8007 S:000000011a446000 P:000000015660c13d
Oops: 0038 ilc:3 [#1] PREEMPT SMP
Modules linked in: mlx5_ib ...
CPU: 8 PID: 7556 Comm: bash Not tainted 6.9.0-rc7 #8
Hardware name: IBM 3931 A01 704 (LPAR)
Krnl PSW : 0704e00180000000 0000014b75e7b606 (ap_parse_bitmap_str+0x10e/0x1f8)
R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:2 PM:0 RI:0 EA:3
Krnl GPRS: 0000000000000001 ffffffffffffffc0 0000000000000001 00000048f96b75d3
000000cb00000100 ffffffffffffffff ffffffffffffffff 000000cb7df6fce0
000000cb7df6fce0 00000000ffffffff 000000000000002b 00000048ffffffff
000003ff9b2dbc80 200000cb7df6fcd8 0000014bffffffc0 000000cb7df6fbc8
Krnl Code: 0000014b75e7b5fc: a7840047 brc 8,0000014b75e7b68a
0000014b75e7b600: 18b2 lr %r11,%r2
#0000014b75e7b602: a7f4000a brc 15,0000014b75e7b616
>0000014b75e7b606: eb22d00000e6 laog %r2,%r2,0(%r13)
0000014b75e7b60c: a7680001 lhi %r6,1
0000014b75e7b610: 187b lr %r7,%r11
0000014b75e7b612: 84960021 brxh %r9,%r6,0000014b75e7b654
0000014b75e7b616: 18e9 lr %r14,%r9
Call Trace:
[<0000014b75e7b606>] ap_parse_bitmap_str+0x10e/0x1f8
([<0000014b75e7b5dc>] ap_parse_bitmap_str+0xe4/0x1f8)
[<0000014b75e7b758>] apmask_store+0x68/0x140
[<0000014b75679196>] kernfs_fop_write_iter+0x14e/0x1e8
[<0000014b75598524>] vfs_write+0x1b4/0x448
[<0000014b7559894c>] ksys_write+0x74/0x100
[<0000014b7618a440>] __do_syscall+0x268/0x328
[<0000014b761a3558>] system_call+0x70/0x98
INFO: lockdep is turned off.
Last Breaking-Event-Address:
[<0000014b75e7b636>] ap_parse_bitmap_str+0x13e/0x1f8
Kernel panic - not syncing: Fatal exception: panic_on_oops
occured when /sys/bus/ap/a[pq]mask was updated with a relative mask value
(like +0x10-0x12,+60,-90) with one of the numeric values exceeding INT_MAX.
The fix is simple: use unsigned long values for the internal variables. The
correct checks are already in place in the function but a simple int for
the internal variables was used with the possibility to overflow.
Reported-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Tested-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 8692a24d0fae19f674d51726d179ad04ba95d958 ]
The subchannel-type field "st" of s390_cio_stsch and s390_cio_msch
tracepoints is incorrectly filled with the subchannel-enabled SCHIB
value "ena". Fix this by assigning the correct value.
Fixes: d1de8633d96a ("s390 cio: Rewrite trace point class s390_class_schib")
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 50ed48c80fecbe17218afed4f8bed005c802976c ]
Tests with hot-plugging crytpo cards on KVM guests with debug
kernel build revealed an use after free for the load field of
the struct zcrypt_card. The reason was an incorrect reference
handling of the zcrypt card object which could lead to a free
of the zcrypt card object while it was still in use.
This is an example of the slab message:
kernel: 0x00000000885a7512-0x00000000885a7513 @offset=1298. First byte 0x68 instead of 0x6b
kernel: Allocated in zcrypt_card_alloc+0x36/0x70 [zcrypt] age=18046 cpu=3 pid=43
kernel: kmalloc_trace+0x3f2/0x470
kernel: zcrypt_card_alloc+0x36/0x70 [zcrypt]
kernel: zcrypt_cex4_card_probe+0x26/0x380 [zcrypt_cex4]
kernel: ap_device_probe+0x15c/0x290
kernel: really_probe+0xd2/0x468
kernel: driver_probe_device+0x40/0xf0
kernel: __device_attach_driver+0xc0/0x140
kernel: bus_for_each_drv+0x8c/0xd0
kernel: __device_attach+0x114/0x198
kernel: bus_probe_device+0xb4/0xc8
kernel: device_add+0x4d2/0x6e0
kernel: ap_scan_adapter+0x3d0/0x7c0
kernel: ap_scan_bus+0x5a/0x3b0
kernel: ap_scan_bus_wq_callback+0x40/0x60
kernel: process_one_work+0x26e/0x620
kernel: worker_thread+0x21c/0x440
kernel: Freed in zcrypt_card_put+0x54/0x80 [zcrypt] age=9024 cpu=3 pid=43
kernel: kfree+0x37e/0x418
kernel: zcrypt_card_put+0x54/0x80 [zcrypt]
kernel: ap_device_remove+0x4c/0xe0
kernel: device_release_driver_internal+0x1c4/0x270
kernel: bus_remove_device+0x100/0x188
kernel: device_del+0x164/0x3c0
kernel: device_unregister+0x30/0x90
kernel: ap_scan_adapter+0xc8/0x7c0
kernel: ap_scan_bus+0x5a/0x3b0
kernel: ap_scan_bus_wq_callback+0x40/0x60
kernel: process_one_work+0x26e/0x620
kernel: worker_thread+0x21c/0x440
kernel: kthread+0x150/0x168
kernel: __ret_from_fork+0x3c/0x58
kernel: ret_from_fork+0xa/0x30
kernel: Slab 0x00000372022169c0 objects=20 used=18 fp=0x00000000885a7c88 flags=0x3ffff00000000a00(workingset|slab|node=0|zone=1|lastcpupid=0x1ffff)
kernel: Object 0x00000000885a74b8 @offset=1208 fp=0x00000000885a7c88
kernel: Redzone 00000000885a74b0: bb bb bb bb bb bb bb bb ........
kernel: Object 00000000885a74b8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
kernel: Object 00000000885a74c8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
kernel: Object 00000000885a74d8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
kernel: Object 00000000885a74e8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
kernel: Object 00000000885a74f8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
kernel: Object 00000000885a7508: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 68 4b 6b 6b 6b a5 kkkkkkkkkkhKkkk.
kernel: Redzone 00000000885a7518: bb bb bb bb bb bb bb bb ........
kernel: Padding 00000000885a756c: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZZZZZ
kernel: CPU: 0 PID: 387 Comm: systemd-udevd Not tainted 6.8.0-HF #2
kernel: Hardware name: IBM 3931 A01 704 (KVM/Linux)
kernel: Call Trace:
kernel: [<00000000ca5ab5b8>] dump_stack_lvl+0x90/0x120
kernel: [<00000000c99d78bc>] check_bytes_and_report+0x114/0x140
kernel: [<00000000c99d53cc>] check_object+0x334/0x3f8
kernel: [<00000000c99d820c>] alloc_debug_processing+0xc4/0x1f8
kernel: [<00000000c99d852e>] get_partial_node.part.0+0x1ee/0x3e0
kernel: [<00000000c99d94ec>] ___slab_alloc+0xaf4/0x13c8
kernel: [<00000000c99d9e38>] __slab_alloc.constprop.0+0x78/0xb8
kernel: [<00000000c99dc8dc>] __kmalloc+0x434/0x590
kernel: [<00000000c9b4c0ce>] ext4_htree_store_dirent+0x4e/0x1c0
kernel: [<00000000c9b908a2>] htree_dirblock_to_tree+0x17a/0x3f0
kernel: [<00000000c9b919dc>] ext4_htree_fill_tree+0x134/0x400
kernel: [<00000000c9b4b3d0>] ext4_dx_readdir+0x160/0x2f0
kernel: [<00000000c9b4bedc>] ext4_readdir+0x5f4/0x760
kernel: [<00000000c9a7efc4>] iterate_dir+0xb4/0x280
kernel: [<00000000c9a7f1ea>] __do_sys_getdents64+0x5a/0x120
kernel: [<00000000ca5d6946>] __do_syscall+0x256/0x310
kernel: [<00000000ca5eea10>] system_call+0x70/0x98
kernel: INFO: lockdep is turned off.
kernel: FIX kmalloc-96: Restoring Poison 0x00000000885a7512-0x00000000885a7513=0x6b
kernel: FIX kmalloc-96: Marking all objects used
The fix is simple: Before use of the queue not only the queue object
but also the card object needs to increase it's reference count
with a call to zcrypt_card_get(). Similar after use of the queue
not only the queue but also the card object's reference count is
decreased with zcrypt_card_put().
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 5ef1dc40ffa6a6cb968b0fdc43c3a61727a9e950 upstream.
The s390 common I/O layer (CIO) returns an unexpected -EBUSY return code
when drivers try to start I/O while a path-verification (PV) process is
pending. This can lead to failed device initialization attempts with
symptoms like broken network connectivity after boot.
Fix this by replacing the -EBUSY return code with a deferred condition
code 1 reply to make path-verification handling consistent from a
driver's point of view.
The problem can be reproduced semi-regularly using the following process,
while repeating steps 2-3 as necessary (example assumes an OSA device
with bus-IDs 0.0.a000-0.0.a002 on CHPID 0.02):
1. echo 0.0.a000,0.0.a001,0.0.a002 >/sys/bus/ccwgroup/drivers/qeth/group
2. echo 0 > /sys/bus/ccwgroup/devices/0.0.a000/online
3. echo 1 > /sys/bus/ccwgroup/devices/0.0.a000/online ; \
echo on > /sys/devices/css0/chp0.02/status
Background information:
The common I/O layer starts path-verification I/Os when it receives
indications about changes in a device path's availability. This occurs
for example when hardware events indicate a change in channel-path
status, or when a manual operation such as a CHPID vary or configure
operation is performed.
If a driver attempts to start I/O while a PV is running, CIO reports a
successful I/O start (ccw_device_start() return code 0). Then, after
completion of PV, CIO synthesizes an interrupt response that indicates
an asynchronous status condition that prevented the start of the I/O
(deferred condition code 1).
If a PV indication arrives while a device is busy with driver-owned I/O,
PV is delayed until after I/O completion was reported to the driver's
interrupt handler. To ensure that PV can be started eventually, CIO
reports a device busy condition (ccw_device_start() return code -EBUSY)
if a driver tries to start another I/O while PV is pending.
In some cases this -EBUSY return code causes device drivers to consider
a device not operational, resulting in failed device initialization.
Note: The code that introduced the problem was added in 2003. Symptoms
started appearing with the following CIO commit that causes a PV
indication when a device is removed from the cio_ignore list after the
associated parent subchannel device was probed, but before online
processing of the CCW device has started:
2297791c92d0 ("s390/cio: dont unregister subchannel from child-drivers")
During boot, the cio_ignore list is modified by the cio_ignore dracut
module [1] as well as Linux vendor-specific systemd service scripts[2].
When combined, this commit and boot scripts cause a frequent occurrence
of the problem during boot.
[1] https://github.com/dracutdevs/dracut/tree/master/modules.d/81cio_ignore
[2] https://github.com/SUSE/s390-tools/blob/master/cio_ignore.service
Cc: stable@vger.kernel.org # v5.15+
Fixes: 2297791c92d0 ("s390/cio: dont unregister subchannel from child-drivers")
Tested-By: Thorsten Winkler <twinkler@linux.ibm.com>
Reviewed-by: Thorsten Winkler <twinkler@linux.ibm.com>
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2fe8a236436fe40d8d26a1af8d150fc80f04ee1a upstream.
Symptom:
In case of a bad cable connection (e.g. dirty optics) a fast sequence of
network DOWN-UP-DOWN-UP could happen. UP triggers recovery of the qeth
interface. In case of a second DOWN while recovery is still ongoing, it
can happen that the IP@ of a Layer3 qeth interface is lost and will not
be recovered by the second UP.
Problem:
When registration of IP addresses with Layer 3 qeth devices fails, (e.g.
because of bad address format) the respective IP address is deleted from
its hash-table in the driver. If registration fails because of a ENETDOWN
condition, the address should stay in the hashtable, so a subsequent
recovery can restore it.
3caa4af834df ("qeth: keep ip-address after LAN_OFFLINE failure")
fixes this for registration failures during normal operation, but not
during recovery.
Solution:
Keep L3-IP address in case of ENETDOWN in qeth_l3_recover_ip(). For
consistency with qeth_l3_add_ip() we also keep it in case of EADDRINUSE,
i.e. for some reason the card already/still has this address registered.
Fixes: 4a71df50047f ("qeth: new qeth device driver")
Cc: stable@vger.kernel.org
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Link: https://lore.kernel.org/r/20240206085849.2902775-1-wintera@linux.ibm.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit b1a6a1a77f0666a5a6dc0893ab6ec8fcae46f24c ]
Fix virtual vs physical address confusion (which currently are the same).
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit db46cd1e0426f52999d50fa72cfa97fa39952885 upstream.
In dasd_profile_start() the amount of requests on the device queue are
counted. The access to the device queue is unprotected against
concurrent access. With a lot of parallel I/O, especially with alias
devices enabled, the device queue can change while dasd_profile_start()
is accessing the queue. In the worst case this leads to a kernel panic
due to incorrect pointer accesses.
Fix this by taking the device lock before accessing the queue and
counting the requests. Additionally the check for a valid profile data
pointer can be done earlier to avoid unnecessary locking in a hot path.
Cc: <stable@vger.kernel.org>
Fixes: 4fa52aa7a82f ("[S390] dasd: add enhanced DASD statistics interface")
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Link: https://lore.kernel.org/r/20231025132437.1223363-3-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b481f644d9174670b385c3a699617052cd2a79d3 upstream.
When device_register() fails, zfcp_port_release() will be called after
put_device(). As a result, zfcp_ccw_adapter_put() will be called twice: one
in zfcp_port_release() and one in the error path after device_register().
So the reference on the adapter object is doubly put, which may lead to a
premature free. Fix this by adjusting the error tag after
device_register().
Fixes: f3450c7b9172 ("[SCSI] zfcp: Replace local reference counting with common kref")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Link: https://lore.kernel.org/r/20230923103723.10320-1-dinghao.liu@zju.edu.cn
Acked-by: Benjamin Block <bblock@linux.ibm.com>
Cc: stable@vger.kernel.org # v2.6.33+
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 6252f47b78031979ad919f971dc8468b893488bd ]
When dev_set_name() fails, zcdn_create() doesn't free the newly
allocated resources. Do it.
Fixes: 00fab2350e6b ("s390/zcrypt: multiple zcrypt device nodes support")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230831110000.24279-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 37a08f010b7c423b5e4c9ed3b187d21166553007 ]
Commit 'fa6999e326fe ("s390/pkey: support CCA and EP11 secure ECC
private keys")' introduced PKEY_TYPE_EP11_AES as a supplement to
PKEY_TYPE_EP11. All pkeys have an internal header/payload structure,
which is opaque to the userspace. The header structures for
PKEY_TYPE_EP11 and PKEY_TYPE_EP11_AES are nearly identical and there
is no reason, why different structures are used. In preparation to fix
the keyversion handling in the broken PKEY IOCTLs, the same header
structure is used for PKEY_TYPE_EP11 and PKEY_TYPE_EP11_AES. This
reduces the number of different code paths and increases the
readability.
Fixes: fa6999e326fe ("s390/pkey: support CCA and EP11 secure ECC private keys")
Signed-off-by: Holger Dengler <dengler@linux.ibm.com>
Reviewed-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8a2278ce9c25048d999fe1a3561def75d963f471 ]
The DASD device driver has a function to requeue requests to the
blocklayer.
This function is used in various cases when basic settings for the device
have to be changed like High Performance Ficon related parameters or copy
pair settings.
The functions iterates over the device->ccw_queue and also removes the
requests from the block->ccw_queue.
In case the device is started on an alias device instead of the base
device it might be removed from the block->ccw_queue without having it
canceled properly before. This might lead to a hanging device since the
request is no longer on a queue and can not be handled properly.
Fix by iterating over the block->ccw_queue instead of the
device->ccw_queue. This will take care of all blocklayer related requests
and handle them on all associated DASD devices.
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Link: https://lore.kernel.org/r/20230721193647.3889634-4-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit acea28a6b74f458defda7417d2217b051ba7d444 ]
If a DASD request fails an error recovery procedure (ERP) request might
be built as a copy of the original request to do error recovery.
The ERP request gets a number of retries assigned.
This number is always 256 no matter what other value might have been set
for the original request. This is not what is expected when a user
specifies a certain amount of retries for the device via sysfs.
Correctly use the number of retries of the original request for ERP
requests.
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Link: https://lore.kernel.org/r/20230721193647.3889634-3-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit e65851989001c0c9ba9177564b13b38201c0854c upstream.
Storage devices are free to send RSCNs, e.g. for internal state changes. If
this happens on all connected paths, zfcp risks temporarily losing all
paths at the same time. This has strong requirements on multipath
configuration such as "no_path_retry queue".
Avoid such situations by deferring fc_rport blocking until after the ADISC
response, when any actual state change of the remote port became clear.
The already existing port recovery triggers explicitly block the fc_rport.
The triggers are: on ADISC reject or timeout (typical cable pull case), and
on ADISC indicating that the remote port has changed its WWPN or
the port is meanwhile no longer open.
As a side effect, this also removes a confusing direct function call to
another work item function zfcp_scsi_rport_work() instead of scheduling
that other work item. It was probably done that way to have the rport block
side effect immediate and synchronous to the caller.
Fixes: a2fa0aede07c ("[SCSI] zfcp: Block FC transport rports early on errors")
Cc: stable@vger.kernel.org #v2.6.30+
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Reviewed-by: Fedor Loshakov <loshakov@linux.ibm.com>
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Link: https://lore.kernel.org/r/20230724145156.3920244-1-maier@linux.ibm.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 1cfef80d4c2b2c599189f36f36320b205d9447d9 ]
dev_close() and dev_open() are issued to change the interface state to DOWN
or UP (dev->flags IFF_UP). When the netdev is set DOWN it loses e.g its
Ipv6 addresses and routes. We don't want this in cases of device recovery
(triggered by hardware or software) or when the qeth device is set
offline.
Setting a qeth device offline or online and device recovery actions call
netif_device_detach() and/or netif_device_attach(). That will reset or
set the LOWER_UP indication i.e. change the dev->state Bit
__LINK_STATE_PRESENT. That is enough to e.g. cause bond failovers, and
still preserves the interface settings that are handled by the network
stack.
Don't call dev_open() nor dev_close() from the qeth device driver. Let the
network stack handle this.
Fixes: d4560150cb47 ("s390/qeth: call dev_close() during recovery")
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 05f1d8ed03f547054efbc4d29bb7991c958ede95 upstream.
Quiesce and resume are functions that tell the DASD driver to stop/resume
issuing I/Os to a specific DASD.
On resume dasd_schedule_block_bh() is called to kick handling of IO
requests again. This does unfortunately not cover internal requests which
are used for path verification for example.
This could lead to a hanging device when a path event or anything else
that triggers internal requests occurs on a quiesced device.
Fix by also calling dasd_schedule_device_bh() which triggers handling of
internal requests on resume.
Fixes: 8e09f21574ea ("[S390] dasd: add hyper PAV support to DASD device driver, part 1")
Cc: stable@vger.kernel.org
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Link: https://lore.kernel.org/r/20230721193647.3889634-2-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 80de809bd35e2a8999edf9f5aaa2d8de18921f11 ]
Change boolean parameter of function "qeth_l3_vipa_store" inside the
"qeth_l3_dev_vipa_del4_store" function from "true" to "false" because
"true" is used for adding a virtual ip address and "false" for deleting.
Fixes: 2390166a6b45 ("s390/qeth: clean up L3 sysfs code")
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Signed-off-by: Thorsten Winkler <twinkler@linux.ibm.com>
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 89c0c62e947a01e7a36b54582fd9c9e346170255 ]
Currently, if the device is offline and all the channel paths are
either configured or varied offline, the associated subchannel gets
unregistered. Don't unregister the subchannel, instead unregister
offline device.
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit ccc45cb4e7271c74dbb27776ae8f73d84557f5c6 upstream.
The lock around counting the channel queue length in the BIODASDINFO
ioctl was incorrectly changed to the dasd_block->queue_lock with commit
583d6535cb9d ("dasd: remove dead code"). This can lead to endless list
iterations and a subsequent crash.
The queue_lock is supposed to be used only for queue lists belonging to
dasd_block. For dasd_device related queue lists the ccwdev lock must be
used.
Fix the mentioned issues by correctly using the ccwdev lock instead of
the queue lock.
Fixes: 583d6535cb9d ("dasd: remove dead code")
Cc: stable@vger.kernel.org # v5.0+
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Link: https://lore.kernel.org/r/20230609153750.1258763-2-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 844cf829e5f33e00b279230470c8c93b58b8c16f ]
Key blobs for the IOCTLs PKEY_KBLOB2PROTK[23] may contain clear key
material. Zeroize the copies of these keys in kernel memory after
creating the protected key.
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2862a2fdfae875888e3c1c3634e3422e01d98147 ]
Use "a" constraint instead of "d" constraint to pass the state parameter to
the do_sqbs() inline assembly. This prevents that general purpose register
zero is used for the state parameter.
If the compiler would select general purpose register zero this would be
problematic for the used instruction in rsy format: the register used for
the state parameter is a base register. If the base register is general
purpose register zero the contents of the register are unexpectedly ignored
when the instruction is executed.
This only applies to z/VM guests using QIOASSIST with dedicated (pass through)
QDIO-based devices such as FCP [zfcp driver] as well as real OSA or
HiperSockets [qeth driver].
A possible symptom for this case using zfcp is the following repeating kernel
message pattern:
zfcp <devbusid>: A QDIO problem occurred
zfcp <devbusid>: A QDIO problem occurred
zfcp <devbusid>: qdio: ZFCP on SC <sc> using AI:1 QEBSM:1 PRI:1 TDD:1 SIGA: W
zfcp <devbusid>: A QDIO problem occurred
zfcp <devbusid>: A QDIO problem occurred
Each of the qdio problem message can be accompanied by the following entries
for the affected subchannel <sc> in
/sys/kernel/debug/s390dbf/qdio_error/hex_ascii for zfcp or qeth:
<sc> ccq: 69....
<sc> SQBS ERROR.
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Cc: Steffen Maier <maier@linux.ibm.com>
Fixes: 8129ee164267 ("[PATCH] s390: qdio V=V pass-through")
Cc: <stable@vger.kernel.org>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d3e2ff5436d6ee38b572ba5c01dc7994769bec54 ]
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Stable-dep-of: 2862a2fdfae8 ("s390/qdio: fix do_sqbs() inline assembly constraint")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit d8898ee50edecacdf0141f26fd90acf43d7e9cd7 upstream.
The DASD driver does not kick the requeue list when requeuing IO requests
to the blocklayer. This might lead to hanging blockdevice when there is
no other trigger for this.
Fix by automatically kick the requeue list when requeuing DASD requests
to the blocklayer.
Fixes: e443343e509a ("s390/dasd: blk-mq conversion")
CC: stable@vger.kernel.org # 4.14+
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Link: https://lore.kernel.org/r/20230405142017.2446986-8-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 8f8cf767589f2131ae5d40f3758429095c701c84 ]
The device release callback function invoked to release the matrix device
uses the dev_get_drvdata(device *dev) function to retrieve the
pointer to the vfio_matrix_dev object in order to free its storage. The
problem is, this object is not stored as drvdata with the device; since the
kfree function will accept a NULL pointer, the memory for the
vfio_matrix_dev object is never freed.
Since the device being released is contained within the vfio_matrix_dev
object, the container_of macro will be used to retrieve its pointer.
Fixes: 1fde573413b5 ("s390: vfio-ap: base implementation of VFIO AP device driver")
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Link: https://lore.kernel.org/r/20230320150447.34557-1-akrowiak@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit c0c8a8397fa8a74d04915f4d3d28cb4a5d401427 upstream.
Fix crash with illegal operation exception in dasd_device_tasklet.
Commit b72949328869 ("s390/dasd: Prepare for additional path event handling")
renamed the verify_path function for ECKD but not for FBA and DIAG.
This leads to a panic when the path verification function is called for a
FBA or DIAG device.
Fix by defining a wrapper function for dasd_generic_verify_path().
Fixes: b72949328869 ("s390/dasd: Prepare for additional path event handling")
Cc: <stable@vger.kernel.org> #5.11
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Link: https://lore.kernel.org/r/20210525125006.157531-2-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 460e9bed82e49db1b823dcb4e421783854d86c40 ]
`dasd_reserve_req` is allocated before `dasd_vol_info_req`, and it
also needs to be freed before the error returns, just like the other
cases in this function.
Fixes: 9e12e54c7a8f ("s390/dasd: Handle out-of-space constraint")
Signed-off-by: Qiheng Lin <linqiheng@huawei.com>
Link: https://lore.kernel.org/r/20221208133809.16796-1-linqiheng@huawei.com
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Link: https://lore.kernel.org/r/20230210000253.1644903-3-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b72949328869dfd45f6452c2410647afd7db5f1a ]
As more path events need to be handled for ECKD the current path
verification infrastructure can be reused. Rename all path verifcation
code to fit th |
