summaryrefslogtreecommitdiff
path: root/drivers/s390
AgeCommit message (Collapse)AuthorFilesLines
2025-03-22s390/cio: Fix CHPID "configure" attribute cachingPeter Oberparleiter1-1/+2
[ Upstream commit 32ae4a2992529e2c7934e422035fad1d9b0f1fb5 ] In some environments, the SCLP firmware interface used to query a CHPID's configured state is not supported. On these environments, rapidly reading the corresponding sysfs attribute produces inconsistent results: $ cat /sys/devices/css0/chp0.00/configure cat: /sys/devices/css0/chp0.00/configure: Operation not supported $ cat /sys/devices/css0/chp0.00/configure 3 This occurs for example when Linux is run as a KVM guest. The inconsistency is a result of CIO using cached results for generating the value of the "configure" attribute while failing to handle the situation where no data was returned by SCLP. Fix this by not updating the cache-expiration timestamp when SCLP returns no data. With the fix applied, the system response is consistent: $ cat /sys/devices/css0/chp0.00/configure cat: /sys/devices/css0/chp0.00/configure: Operation not supported $ cat /sys/devices/css0/chp0.00/configure cat: /sys/devices/css0/chp0.00/configure: Operation not supported Reviewed-by: Vineeth Vijayan <vneethv@linux.ibm.com> Reviewed-by: Eric Farman <farman@linux.ibm.com> Tested-by: Eric Farman <farman@linux.ibm.com> Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-27s390/ism: add release function for struct deviceJulian Ruess1-2/+12
[ Upstream commit 915e34d5ad35a6a9e56113f852ade4a730fb88f0 ] According to device_release() in /drivers/base/core.c, a device without a release function is a broken device and must be fixed. The current code directly frees the device after calling device_add() without waiting for other kernel parts to release their references. Thus, a reference could still be held to a struct device, e.g., by sysfs, leading to potential use-after-free issues if a proper release function is not set. Fixes: 8c81ba20349d ("net/smc: De-tangle ism and smc device initialization") Reviewed-by: Alexandra Winter <wintera@linux.ibm.com> Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com> Signed-off-by: Julian Ruess <julianr@linux.ibm.com> Signed-off-by: Alexandra Winter <wintera@linux.ibm.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250214120137.563409-1-wintera@linux.ibm.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-08s390/sclp: Initialize sclp subsystem via arch_cpu_finalize_init()Heiko Carstens1-10/+2
[ Upstream commit 3bcc8a1af581af152d43e42b53db3534018301b5 ] With the switch to GENERIC_CPU_DEVICES an early call to the sclp subsystem was added to smp_prepare_cpus(). This will usually succeed since the sclp subsystem is implicitly initialized early enough if an sclp based console is present. If no such console is present the initialization happens with an arch_initcall(); in such cases calls to the sclp subsystem will fail. For CPU detection this means that the fallback sigp loop will be used permanently to detect CPUs instead of the preferred READ_CPU_INFO sclp request. Fix this by adding an explicit early sclp_init() call via arch_cpu_finalize_init(). Reported-by: Sheshu Ramanandan <sheshu.ramanandan@ibm.com> Fixes: 4a39f12e753d ("s390/smp: Switch to GENERIC_CPU_DEVICES") Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-11-29Merge tag 'driver-core-6.13-rc1' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is a small set of driver core changes for 6.13-rc1. Nothing major for this merge cycle, except for the two simple merge conflicts are here just to make life interesting. Included in here are: - sysfs core changes and preparations for more sysfs api cleanups that can come through all driver trees after -rc1 is out - fw_devlink fixes based on many reports and debugging sessions - list_for_each_reverse() removal, no one was using it! - last-minute seq_printf() format string bug found and fixed in many drivers all at once. - minor bugfixes and changes full details in the shortlog" * tag 'driver-core-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (35 commits) Fix a potential abuse of seq_printf() format string in drivers cpu: Remove spurious NULL in attribute_group definition s390/con3215: Remove spurious NULL in attribute_group definition perf: arm-ni: Remove spurious NULL in attribute_group definition driver core: Constify bin_attribute definitions sysfs: attribute_group: allow registration of const bin_attribute firmware_loader: Fix possible resource leak in fw_log_firmware_info() drivers: core: fw_devlink: Fix excess parameter description in docstring driver core: class: Correct WARN() message in APIs class_(for_each|find)_device() cacheinfo: Use of_property_present() for non-boolean properties cdx: Fix cdx_mmap_resource() after constifying attr in ->mmap() drivers: core: fw_devlink: Make the error message a bit more useful phy: tegra: xusb: Set fwnode for xusb port devices drm: display: Set fwnode for aux bus devices driver core: fw_devlink: Stop trying to optimize cycle detection logic driver core: Constify attribute arguments of binary attributes sysfs: bin_attribute: add const read/write callback variants sysfs: implement all BIN_ATTR_* macros in terms of __BIN_ATTR() sysfs: treewide: constify attribute callback of bin_attribute::llseek() sysfs: treewide: constify attribute callback of bin_attribute::mmap() ...
2024-11-27s390/ap: Replace xchg() with WRITE_ONCE()Heiko Carstens1-1/+1
The result of xchg() is not used, and in addition it is used on a one byte memory area which leads to inefficient code. Use WRITE_ONCE() instead to achieve the same result with much less generated code. Acked-by: Harald Freudenberger <freude@linux.ibm.com> Acked-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2024-11-21s390/vfio-ap: Remove gmap_convert_to_secure() from vfio_ap_opsClaudio Imbrenda1-10/+22
If the page has been exported, do not re-import it. Imports should only be triggered by the guest. The guest will import the page automatically when it will need it again, there is no advantage in importing it manually. Moreover, vfio_pin_pages() will take an extra reference on the page and thus will cause the import to always fail. The extra reference would be dropped only after pointlessly trying to import the page. Fixes: f88fb1335733 ("s390/vfio-ap: make sure nib is shared") Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Link: https://lore.kernel.org/r/20241115135611.87836-1-imbrenda@linux.ibm.com Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2024-11-18Merge tag 's390-6.13-1' of ↵Linus Torvalds37-455/+816
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Heiko Carstens: - Add firmware sysfs interface which allows user space to retrieve the dump area size of the machine - Add 'measurement_chars_full' CHPID sysfs attribute to make the complete associated Channel-Measurements Characteristics Block available - Add virtio-mem support - Move gmap aka KVM page fault handling from the main fault handler to KVM code. This is the first step to make s390 KVM page fault handling similar to other architectures. With this first step the main fault handler does not have any special handling anymore, and therefore convert it to support LOCK_MM_AND_FIND_VMA - With gcc 14 s390 support for flag output operand support for inline assemblies was added. This allows for several optimizations: - Provide a cmpxchg inline assembly which makes use of this, and provide all variants of arch_try_cmpxchg() so that the compiler can generate slightly better code - Convert a few cmpxchg() loops to try_cmpxchg() loops - Similar to x86 add a CC_OUT() helper macro (and other macros), and convert all inline assemblies to make use of them, so that depending on compiler version better code can be generated - List installed host-key hashes in sysfs if the machine supports the Query Ultravisor Keys UVC - Add 'Retrieve Secret' ioctl which allows user space in protected execution guests to retrieve previously stored secrets from the Ultravisor - Add pkey-uv module which supports the conversion of Ultravisor retrievable secrets to protected keys - Extend the existing paes cipher to exploit the full AES-XTS hardware acceleration introduced with message-security assist extension 10 - Convert hopefully all sysfs show functions to use sysfs_emit() so that the constant flow of such patches stop - For PCI devices make use of the newly added Topology ID attribute to enable whole card multi-function support despite the change to PCHID per port. Additionally improve the overall robustness and usability of the multifunction support - Various other small improvements, fixes, and cleanups * tag 's390-6.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (133 commits) s390/cio/ioasm: Convert to use flag output macros s390/cio/qdio: Convert to use flag output macros s390/sclp: Convert to use flag output macros s390/dasd: Convert to use flag output macros s390/boot/physmem: Convert to use flag output macros s390/pci: Convert to use flag output macros s390/kvm: Convert to use flag output macros s390/extmem: Convert to use flag output macros s390/string: Convert to use flag output macros s390/diag: Convert to use flag output macros s390/irq: Convert to use flag output macros s390/smp: Convert to use flag output macros s390/uv: Convert to use flag output macros s390/pai: Convert to use flag output macros s390/mm: Convert to use flag output macros s390/cpu_mf: Convert to use flag output macros s390/cpcmd: Convert to use flag output macros s390/topology: Convert to use flag output macros s390/time: Convert to use flag output macros s390/pageattr: Convert to use flag output macros ...
2024-11-18s390/con3215: Remove spurious NULL in attribute_group definitionThomas Weißschuh1-1/+0
This NULL value is most-likely a copy-paste error from an array definition. So far the NULL didn't have any effect. As there will be a union in struct attribute_group at this location, it will trigger a compiler warning. Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Link: https://lore.kernel.org/r/20241118-sysfs-const-attribute_group-fixes-v1-2-48e0b0ad8cba@weissschuh.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-11-13s390/cio/ioasm: Convert to use flag output macrosHeiko Carstens1-53/+54
Use flag output macros in inline asm to allow for better code generation if the compiler has support for the flag output constraint. Reviewed-by: Juergen Christ <jchrist@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2024-11-13s390/cio/qdio: Convert to use flag output macrosHeiko Carstens1-15/+13
Use flag output macros in inline asm to allow for better code generation if the compiler has support for the flag output constraint. Reviewed-by: Juergen Christ <jchrist@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2024-11-13s390/sclp: Convert to use flag output macrosHeiko Carstens1-7/+11
Use flag output macros in inline asm to allow for better code generation if the compiler has support for the flag output constraint. Reviewed-by: Juergen Christ <jchrist@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2024-11-13s390/dasd: Convert to use flag output macrosHeiko Carstens1-6/+9
Use flag output macros in inline asm to allow for better code generation if the compiler has support for the flag output constraint. Reviewed-by: Juergen Christ <jchrist@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2024-11-13s390/cio: Externalize full CMG characteristicsPeter Oberparleiter4-20/+39
The current "measurement_chars" CHPID sysfs attribute exposes only a limited, validity-filtered portion of data from the associated Channel- Measurements Characteristics Block (CMCB). New machine models add data that is relevant for userspace tooling to the "header"-portion of the CMCB. This data that is not currently accessible to userspace. To prevent having to add new sysfs attributes whenever a new bit of data is added to the CMCB "header", add a new sysfs attribute named "measurement_chars_full" that exposes the full, unfiltered CMCB. Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com> Reviewed-by: Vineeth Vijayan <vneethv@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2024-11-12s390/con3270: Use NULL instead of 0 for pointersHeiko Carstens1-2/+2
Get rid of sparse warnings: CHECK drivers/s390/char/con3270.c drivers/s390/char/con3270.c:531:15: warning: Using plain integer as NULL pointer drivers/s390/char/con3270.c:749:15: warning: Using plain integer as NULL pointer Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2024-11-09s390/dasd: Fix typo in commentYu Jiaoliang3-3/+3
Fix typo in comment: requeust->request, Removve->Remove, notthing->nothing. Signed-off-by: Yu Jiaoliang <yujiaoliang@vivo.com> Signed-off-by: Stefan Haberland <sth@linux.ibm.com> Link: https://lore.kernel.org/r/20241108133913.3068782-3-sth@linux.ibm.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-11-09s390/dasd: fix redundant /proc/dasd* entries removalMiroslav Franc1-0/+5
In case of an early failure in dasd_init, dasd_proc_init is never called and /proc/dasd* files are never created. That can happen, for example, if an incompatible or incorrect argument is provided to the dasd_mod.dasd= kernel parameter. However, the attempted removal of /proc/dasd* files causes 8 warnings and backtraces in this case. 4 on the error path within dasd_init and 4 when the dasd module is unloaded. Notice the "removing permanent /proc entry 'devices'" message that is caused by the dasd_proc_exit function trying to remove /proc/devices instead of /proc/dasd/devices since dasd_proc_root_entry is NULL and /proc/devices is indeed permanent. Example: ------------[ cut here ]------------ removing permanent /proc entry 'devices' WARNING: CPU: 6 PID: 557 at fs/proc/generic.c:701 remove_proc_entry+0x22e/0x240 CPU: 6 PID: 557 Comm: modprobe Not tainted 6.10.5-1-default #1 openSUSE Tumbleweed f6917bfd6e5a5c7a7e900e0e3b517786fb5c6301 Hardware name: QEMU 8561 QEMU (KVM/Linux) Krnl PSW : 0704c00180000000 000003fffed0e9f2 (remove_proc_entry+0x232/0x240) R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:0 PM:0 RI:0 EA:3 Krnl GPRS: 000003ff00000027 000003ff00000023 0000000000000028 000002f200000000 000002f3f05bec20 0000037ffecfb7d0 000003ffffdabab0 000003ff7ee4ec72 000003ff7ee4ec72 0000000000000007 000002f280e22600 000002f280e22688 000003ffa252cfa0 0000000000010000 000003fffed0e9ee 0000037ffecfba38 Krnl Code: 000003fffed0e9e2: c020004e7017 larl %r2,000003ffff6dca10 000003fffed0e9e8: c0e5ffdfad24 brasl %r14,000003fffe904430 #000003fffed0e9ee: af000000 mc 0,0 >000003fffed0e9f2: a7f4ff4c brc 15,000003fffed0e88a 000003fffed0e9f6: 0707 bcr 0,%r7 000003fffed0e9f8: 0707 bcr 0,%r7 000003fffed0e9fa: 0707 bcr 0,%r7 000003fffed0e9fc: 0707 bcr 0,%r7 Call Trace: [<000003fffed0e9f2>] remove_proc_entry+0x232/0x240 ([<000003fffed0e9ee>] remove_proc_entry+0x22e/0x240) [<000003ff7ef5a084>] dasd_proc_exit+0x34/0x60 [dasd_mod] [<000003ff7ef560c2>] dasd_exit+0x22/0xc0 [dasd_mod] [<000003ff7ee5a26e>] dasd_init+0x26e/0x280 [dasd_mod] [<000003fffe8ac9d0>] do_one_initcall+0x40/0x220 [<000003fffe9bc758>] do_init_module+0x78/0x260 [<000003fffe9bf3a6>] __do_sys_init_module+0x216/0x250 [<000003ffff37ac9e>] __do_syscall+0x24e/0x2d0 [<000003ffff38cca8>] system_call+0x70/0x98 Last Breaking-Event-Address: [<000003fffef7ea20>] __s390_indirect_jump_r14+0x0/0x10 ---[ end trace 0000000000000000 ]--- ------------[ cut here ]------------ While the cause is a user failure, the dasd module should handle the situation more gracefully. One of the simplest solutions is to make removal of the /proc/dasd* entries idempotent. Signed-off-by: Miroslav Franc <mfranc@suse.cz> [ sth: shortened if clause ] Signed-off-by: Stefan Haberland <sth@linux.ibm.com> Link: https://lore.kernel.org/r/20241108133913.3068782-2-sth@linux.ibm.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-11-07s390/uvdevice: Fix and slightly improve kernel-doc commentHeiko Carstens1-12/+20
Fix incorrect kernel-doc comment style, add missing return statement, fix incorrect parameter name, and add some additional consistency across all kernel-doc comments. Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2024-11-07s390/uvdevice: Support longer secret listsSteffen Eiden1-19/+50
Enable the list IOCTL to provide lists longer than one page (85 entries). The list IOCTL now accepts any argument length in page granularity. It fills the argument up to this length with entries until the list ends. User space unaware of this enhancement will still receive one page of data and an uv_rc 0x0100. Signed-off-by: Steffen Eiden <seiden@linux.ibm.com> Reviewed-by: Janosch Frank <frankja@linux.ibm.com> Link: https://lore.kernel.org/r/20241104153609.1361388-1-seiden@linux.ibm.com Signed-off-by: Janosch Frank <frankja@linux.ibm.com> Message-ID: <20241104153609.1361388-1-seiden@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2024-10-29s390/pkey: Tolerate larger key blobsHolger Dengler2-8/+8
The pkey handlers should only check, if the length of a key blob is big enough for holding a key. Larger blobs should be tolerated. Reviewed-by: Harald Freudenberger <freude@linux.ibm.com> Signed-off-by: Holger Dengler <dengler@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2024-10-29s390/pkey: Add new pkey handler module pkey-uvHarald Freudenberger3-0/+291
This new pkey handler module supports the conversion of Ultravisor retrievable secrets to protected keys. The new module pkey-uv.ko is able to retrieve and verify protected keys backed up by the Ultravisor layer which is only available within protected execution environment. The module is only automatically loaded if there is the UV CPU feature flagged as available. Additionally on module init there is a check for protected execution environment and for UV supporting retrievable secrets. Also if the kernel is not running as a protected execution guest, the module unloads itself with errno ENODEV. The pkey UV module currently supports these Ultravisor secrets and is able to retrieve a protected key for these UV secret types: - UV_SECRET_AES_128 - UV_SECRET_AES_192 - UV_SECRET_AES_256 - UV_SECRET_AES_XTS_128 - UV_SECRET_AES_XTS_256 - UV_SECRET_HMAC_SHA_256 - UV_SECRET_HMAC_SHA_512 - UV_SECRET_ECDSA_P256 - UV_SECRET_ECDSA_P384 - UV_SECRET_ECDSA_P521 - UV_SECRET_ECDSA_ED25519 - UV_SECRET_ECDSA_ED448 Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Reviewed-by: Holger Dengler <dengler@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2024-10-29s390/pkey: Build module name array selectively based on kernel config optionsHarald Freudenberger1-1/+10
There is a static array of pkey handler kernel module names used in case the pkey_handler_request_modules() is invoked. This static array is walked through and if the module is not already loaded a module_request() is performed. This patch reworks the code to instead of unconditionally building up a list of module names into the array, only the pkey handler modules available based on the current kernel config options are inserted. Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Reviewed-by: Holger Dengler <dengler@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2024-10-29s390/pkey: Rework pkey verify for protected keysHarald Freudenberger1-42/+38
Rework the verification of protected keys by simple check for the correct AES wrapping key verification pattern. A protected key always carries the AES wrapping key verification pattern within the blob. The old code really used the protected key for an en/decrypt operation and by doing so, verified the AES WK VP. But a much simpler and more generic way is to extract the AES WK VP value from the key and compare it with AES WK VP from a freshly created dummy protected key. This also eliminates the limitation to only be able to verify AES protected keys. With this change any kind of known protected key can be verified. Suggested-by: Holger Dengler <dengler@linux.ibm.com> Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Reviewed-by: Holger Dengler <dengler@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2024-10-29s390/pkey: Simplify protected key length calculation codeHarald Freudenberger2-118/+72
The calculation of the length of a protected key based on the protected key type is scattered over certain places within the pkey code. By introducing a new inline function pkey_keytype_to_size() this can be centralized and the calling code can be reduced and simplified. With this also comes a slight rework of the generation of protected keys. Now the pkey_pckmo module is able to generate all but ECC keys. Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Reviewed-by: Holger Dengler <dengler@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2024-10-29s390/zcrypt: Cleanup include zcrypt_api.hHarald Freudenberger5-4/+1
Move include statement for zcrypt_api.h from the codefiles to the zcrypt_ccamis.h header file. Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Suggested-by: Holger Dengler <dengler@linux.ibm.com> Reviewed-by: Holger Dengler <dengler@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2024-10-29s390/uvdevice: Add Retrieve Secret IOCTLSteffen Eiden1-1/+57
Add a new IOCL number to support the new Retrieve Secret UVC for user-space. User-space provides the index of the secret (u16) to retrieve. The uvdevice calls the Retrieve Secret UVC and copies the secret into the provided buffer if it fits. To get the secret type, index, and size user-space needs to call the List UVC first. Reviewed-by: Christoph Schlameuss <schlameuss@linux.ibm.com> Reviewed-by: Janosch Frank <frankja@linux.ibm.com> Signed-off-by: Steffen Eiden <seiden@linux.ibm.com> Link: https://lore.kernel.org/r/20241024062638.1465970-4-seiden@linux.ibm.com Signed-off-by: Janosch Frank <frankja@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2024-10-25s390/netiucv: Switch over to sysfs_emit()Mete Durlu1-12/+12
Per Documentation/filesystems/sysfs.rst, sysfs_emit() is preferred for presenting attributes to user space in sysfs. Convert the left-over uses in the netiucv code. Signed-off-by: Mete Durlu <meted@linux.ibm.com> Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2024-10-25s390/vfio-ap: Switch over to sysfs_emit()Mete Durlu1-33/+12
Per Documentation/filesystems/sysfs.rst, sysfs_emit() is preferred for presenting attributes to user space in sysfs. Convert the left-over uses in the vfio_ap code. Signed-off-by: Mete Durlu <meted@linux.ibm.com> Reviewed-by: Anthony Krowiak <akrowiak@linux.ibm.com> Tested-by: Anthony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2024-10-25s390/vmur: Switch over to sysfs_emit()Mete Durlu1-1/+1
Per Documentation/filesystems/sysfs.rst, sysfs_emit() is preferred for presenting attributes to user space in sysfs. Convert the left-over uses in the char/vmur code. Signed-off-by: Mete Durlu <meted@linux.ibm.com> Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2024-10-25s390/sclp_cpi: Switch over to sysfs_emit()Mete Durlu1-4/+4
Per Documentation/filesystems/sysfs.rst, sysfs_emit() is preferred for presenting attributes to user space in sysfs. Convert the left-over uses in the char/sclp_cpi_sys code. Signed-off-by: Mete Durlu <meted@linux.ibm.com> Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2024-10-25s390/sclp_ocf: Switch over to sysfs_emit()Mete Durlu1-2/+2
Per Documentation/filesystems/sysfs.rst, sysfs_emit() is preferred for presenting attributes to user space in sysfs. Convert the left-over uses in the char/sclp_ocf code. Signed-off-by: Mete Durlu <meted@linux.ibm.com> Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2024-10-25s390/vmlogrdr: Switch over to sysfs_emit()Mete Durlu1-2/+2
Per Documentation/filesystems/sysfs.rst, sysfs_emit() is preferred for presenting attributes to user space in sysfs. Convert the left-over uses in the char/vmlogrdr code. Signed-off-by: Mete Durlu <meted@linux.ibm.com> Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2024-10-25s390/tape: Switch over to sysfs_emit()Mete Durlu1-8/+8
Per Documentation/filesystems/sysfs.rst, sysfs_emit() is preferred for presenting attributes to user space in sysfs. Convert the left-over uses in the char/tape_core code. Signed-off-by: Mete Durlu <meted@linux.ibm.com> Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com> Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2024-10-25s390/dcssblk: Switch over to sysfs_emit()Mete Durlu1-12/+6
Per Documentation/filesystems/sysfs.rst, sysfs_emit() is preferred for presenting attributes to user space in sysfs. Convert the left-over uses in the block/dcssblk code. Signed-off-by: Mete Durlu <meted@linux.ibm.com> Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2024-10-25s390/cio/scm: Switch over to sysfs_emit()Mete Durlu1-1/+1
Per Documentation/filesystems/sysfs.rst, sysfs_emit() is preferred for presenting attributes to user space in sysfs. Convert the left-over uses in the cio/scm code. Signed-off-by: Mete Durlu <meted@linux.ibm.com> Acked-by: Vineeth Vijayan <vneethv@linux.ibm.com> Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2024-10-25s390/cio/css: Switch over to sysfs_emit()Mete Durlu1-3/+3
Per Documentation/filesystems/sysfs.rst, sysfs_emit() is preferred for presenting attributes to user space in sysfs. Convert the left-over uses in the cio/css code. Signed-off-by: Mete Durlu <meted@linux.ibm.com> Acked-by: Vineeth Vijayan <vneethv@linux.ibm.com> Tested-by: Vineeth Vijayan <vneethv@linux.ibm.com> Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2024-10-25s390/cio/ccwgroup: Switch over to sysfs_emit()Mete Durlu1-1/+1
Per Documentation/filesystems/sysfs.rst, sysfs_emit() is preferred for presenting attributes to user space in sysfs. Convert the left-over uses in the cio/ccwgroup code. Signed-off-by: Mete Durlu <meted@linux.ibm.com> Acked-by: Vineeth Vijayan <vneethv@linux.ibm.com> Tested-by: Vineeth Vijayan <vneethv@linux.ibm.com> Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2024-10-25s390/cio/cmf: Switch over to sysfs_emit()Mete Durlu1-5/+4
Per Documentation/filesystems/sysfs.rst, sysfs_emit() is preferred for presenting attributes to user space in sysfs. Convert the left-over uses in the cio/cmf code. Signed-off-by: Mete Durlu <meted@linux.ibm.com> Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2024-10-25s390/cio/device: Switch over to sysfs_emit()Mete Durlu1-12/+10
Per Documentation/filesystems/sysfs.rst, sysfs_emit() is preferred for presenting attributes to user space in sysfs. Convert the left-over uses in the cio/device code. Signed-off-by: Mete Durlu <meted@linux.ibm.com> Acked-by: Vineeth Vijayan <vneethv@linux.ibm.com> Tested-by: Vineeth Vijayan <vneethv@linux.ibm.com> Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2024-10-25s390/cio/chp: Switch over to sysfs_emit()Mete Durlu1-9/+9
Per Documentation/filesystems/sysfs.rst, sysfs_emit() is preferred for presenting attributes to user space in sysfs. Convert the left-over uses in the cio/chp code. Signed-off-by: Mete Durlu <meted@linux.ibm.com> Tested-by: Vineeth Vijayan <vneethv@linux.ibm.com> Acked-by: Vineeth Vijayan <vneethv@linux.ibm.com> Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2024-10-25scsi: zfcp: Switch over to sysfs_emit()Mete Durlu1-42/+40
Per Documentation/filesystems/sysfs.rst, sysfs_emit() is preferred for presenting attributes to user space in sysfs. Convert the left-over uses in the zfcp code. Signed-off-by: Mete Durlu <meted@linux.ibm.com> Tested-by: Benjamin Block <bblock@linux.ibm.com> Acked-by: Benjamin Block <bblock@linux.ibm.com> Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2024-10-25s390/cio: Do not unregister the subchannel based on DNVVineeth Vijayan2-2/+22
Starting with commit 2297791c92d0 ("s390/cio: dont unregister subchannel from child-drivers"), CIO does not unregister subchannels when the attached device is invalid or unavailable. Instead, it allows subchannels to exist without a connected device. However, if the DNV value is 0, such as, when all the CHPIDs of a subchannel are configured in standby state, the subchannel is unregistered, which contradicts the current subchannel specification. Update the logic so that subchannels are not unregistered based on the DNV value. Also update the SCHIB information even if the DNV bit is zero. Suggested-by: Peter Oberparleiter <oberpar@linux.ibm.com> Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com> Fixes: 2297791c92d0 ("s390/cio: dont unregister subchannel from child-drivers") Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2024-10-16s390/sclp_vt220: Convert newlines to CRLF instead of LFCRThomas Weißschuh1-2/+2
According to the VT220 specification the possible character combinations sent on RETURN are only CR or CRLF [0]. The Return key sends either a CR character (0/13) or a CR character (0/13) and an LF character (0/10), depending on the set/reset state of line feed/new line mode (LNM). The sclp/vt220 driver however uses LFCR. This can confuse tools, for example the kunit runner. Link: https://vt100.net/docs/vt220-rm/chapter3.html#S3.2 Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de> Reviewed-by: Sven Schnelle <svens@linux.ibm.com> Link: https://lore.kernel.org/r/20241014-s390-kunit-v1-2-941defa765a6@linutronix.de Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2024-10-16s390/sclp: Deactivate sclp after all its usersThomas Weißschuh1-1/+2
On reboot the SCLP interface is deactivated through a reboot notifier. This happens before other components using SCLP have the chance to run their own reboot notifiers. Two of those components are the SCLP console and tty drivers which try to flush the last outstanding messages. At that point the SCLP interface is already unusable and the messages are discarded. Execute sclp_deactivate() as late as possible to avoid this issue. Fixes: 4ae46db99cd8 ("s390/consoles: improve panic notifiers reliability") Cc: stable@vger.kernel.org Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de> Reviewed-by: Sven Schnelle <svens@linux.ibm.com> Link: https://lore.kernel.org/r/20241014-s390-kunit-v1-1-941defa765a6@linutronix.de Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2024-10-16s390/pkey_pckmo: Return with success for valid protected key typesHolger Dengler1-0/+1
The key_to_protkey handler function in module pkey_pckmo should return with success on all known protected key types, including the new types introduced by fd197556eef5 ("s390/pkey: Add AES xts and HMAC clear key token support"). Fixes: fd197556eef5 ("s390/pkey: Add AES xts and HMAC clear key token support") Signed-off-by: Holger Dengler <dengler@linux.ibm.com> Reviewed-by: Ingo Franzki <ifranzki@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2024-10-10s390/cio: Correct some typos in commentsShen Lichuan3-5/+5
Fixed some confusing typos that were currently identified with codespell, the details are as follows: -in the code comments: drivers/s390/cio/chsc.c:379: EBCIDC ==> EBCDIC drivers/s390/cio/cio.h:22: sublass ==> subclass drivers/s390/cio/cmf.c:49: exended ==> extended drivers/s390/cio/cmf.c:138: sinlge ==> single drivers/s390/cio/cmf.c:1230: Reenable ==> Re-enable Signed-off-by: Shen Lichuan <shenlichuan@vivo.com> Link: https://lore.kernel.org/r/20240929080353.11690-1-shenlichuan@vivo.com Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2024-10-10s390/sclp: Allow user-space to provide PCI reports for optical modulesNiklas Schnelle1-0/+2
The new SCLP action qualifier 3 is used by user-space code to provide optical module monitoring data to the platform. Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2024-10-10s390/virtio_ccw: Fix dma_parm pointer not set upHalil Pasic1-0/+4
At least since commit 334304ac2bac ("dma-mapping: don't return errors from dma_set_max_seg_size") setting up device.dma_parms is basically mandated by the DMA API. As of now Channel (CCW) I/O in general does not utilize the DMA API, except for virtio. For virtio-ccw however the common virtio DMA infrastructure is such that most of the DMA stuff hinges on the virtio parent device, which is a CCW device. So lets set up the dma_parms pointer for the CCW parent device and hope for the best! Fixes: 334304ac2bac ("dma-mapping: don't return errors from dma_set_max_seg_size") Reported-by: Marc Hartmayer <mhartmay@linux.ibm.com> Reviewed-by: Eric Farman <farman@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Tested-by: Marc Hartmayer <mhartmay@linux.ibm.com> Link: https://lore.kernel.org/r/20241007201030.204028-1-pasic@linux.ibm.com Signed-off-by: Halil Pasic <pasic@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2024-10-10s390/ap: Fix CCA crypto card behavior within protected execution environmentHarald Freudenberger3-11/+22
A crypto card comes in 3 flavors: accelerator, CCA co-processor or EP11 co-processor. Within a protected execution environment only the accelerator and EP11 co-processor is supported. However, it is possible to set up a KVM guest with a CCA card and run it as a protected execution guest. There is nothing at the host side which prevents this. Within such a guest, a CCA card is shown as "illicit" and you can't do anything with such a crypto card. Regardless of the unsupported CCA card within a protected execution guest there are a couple of user space applications which unconditional try to run crypto requests to the zcrypt device driver. There was a bug within the AP bus code which allowed such a request to be forwarded to a CCA card where it is finally rejected and the driver reacts with -ENODEV but also triggers an AP bus scan. Together with a retry loop this caused some kind of "hang" of the KVM guest. On startup it caused timeouts and finally led the KVM guest startup fail. Fix that by closing the gap and make sure a CCA card is not usable within a protected execution environment. Another behavior within an protected execution environment with CCA cards was that the se_bind and se_associate AP queue sysfs attributes where shown. The implementation unconditional always added these attributes. Fix that by checking if the card mode is supported within a protected execution environment and only if valid, add the attribute group. Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Reviewed-by: Holger Dengler <dengler@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2024-09-28Merge tag 's390-6.12-2' of ↵Linus Torvalds1-0/+13
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull more s390 updates from Vasily Gorbik: - Clean up and improve vdso code: use SYM_* macros for function and data annotations, add CFI annotations to fix GDB unwinding, optimize the chacha20 implementation - Add vfio-ap driver feature advertisement for use by libvirt and mdevctl * tag 's390-6.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/vfio-ap: Driver feature advertisement s390/vdso: Use one large alternative instead of an alternative branch s390/vdso: Use SYM_DATA_START_LOCAL()/SYM_DATA_END() for data objects tools: Add additional SYM_*() stubs to linkage.h s390/vdso: Use macros for annotation of asm functions s390/vdso: Add CFI annotations to __arch_chacha20_blocks_nostack() s390/vdso: Fix comment within __arch_chacha20_blocks_nostack() s390/vdso: Get rid of permutation constants
2024-09-27[tree-wide] finally take no_llseek outAl Viro11-12/+0
no_llseek had been defined to NULL two years ago, in commit 868941b14441 ("fs: remove no_llseek") To quote that commit, At -rc1 we'll need do a mechanical removal of no_llseek - git grep -l -w no_llseek | grep -v porting.rst | while read i; do sed -i '/\<no_llseek\>/d' $i done would do it. Unfortunately, that hadn't been done. Linus, could you do that now, so that we could finally put that thing to rest? All instances are of the form .llseek = no_llseek, so it's obviously safe. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2025-09-18 20:35:14 +0000