summaryrefslogtreecommitdiff
path: root/drivers/scsi/hisi_sas/hisi_sas_main.c
AgeCommit message (Collapse)AuthorFilesLines
2023-02-25scsi: hisi_sas: Fix SATA devices missing issue during I_T nexus resetJie Zhan1-3/+5
[ Upstream commit 3c2673a09cf1181318c07b7dbc1bc532ba3d33e3 ] SATA devices on an expander may be removed and not be found again when I_T nexus reset and revalidation are processed simultaneously. The issue comes from: - Revalidation can remove SATA devices in link reset, e.g. in hisi_sas_clear_nexus_ha(). - However, hisi_sas_debug_I_T_nexus_reset() polls the state of a SATA device on an expander after sending link_reset, where it calls: hisi_sas_debug_I_T_nexus_reset sas_ata_wait_after_reset ata_wait_after_reset ata_wait_ready smp_ata_check_ready sas_ex_phy_discover sas_ex_phy_discover_helper sas_set_ex_phy The ex_phy's change count is updated in sas_set_ex_phy(), so SATA devices after a link reset may not be found later through revalidation. A similar issue was reported in: commit 0f3fce5cc77e ("[SCSI] libsas: fix ata_eh clobbering ex_phys via smp_ata_check_ready") commit 87c8331fcf72 ("[SCSI] libsas: prevent domain rediscovery competing with ata error handling"). To address this issue, in hisi_sas_debug_I_T_nexus_reset(), we now call smp_ata_check_ready_type() that only polls the device type while not updating the ex_phy's data of libsas. Fixes: 71453bd9d1bf ("scsi: hisi_sas: Use sas_ata_wait_after_reset() in IT nexus reset") Signed-off-by: Jie Zhan <zhanjie9@hisilicon.com> Link: https://lore.kernel.org/r/20221118083714.4034612-5-zhanjie9@hisilicon.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-02-01scsi: hisi_sas: Set a port invalid only if there are no devices attached ↵Yihang Li1-1/+1
when refreshing port id [ Upstream commit f58c89700630da6554b24fd3df293a24874c10c1 ] Currently the driver sets the port invalid if one phy in the port is not enabled, which may cause issues in expander situation. In directly attached situation, if phy up doesn't occur in time when refreshing port id, the port is incorrectly set to invalid which will also cause disk lost. Therefore set a port invalid only if there are no devices attached to the port. Signed-off-by: Yihang Li <liyihang9@huawei.com> Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Link: https://lore.kernel.org/r/1672805000-141102-3-git-send-email-chenxiang66@hisilicon.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-02-01scsi: hisi_sas: Use abort task set to reset SAS disks when discoveredXingui Yang1-1/+1
[ Upstream commit 037b48057e8b485a8d72f808122796aeadbbee32 ] Currently clear task set is used to abort all commands remaining in the disk when the SAS disk is discovered, and if the disk is discovered by two initiators, other I_T nexuses are also affected. So use abort task set instead and take effect only on the specified I_T nexus. Signed-off-by: Xingui Yang <yangxingui@huawei.com> Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Link: https://lore.kernel.org/r/1672805000-141102-2-git-send-email-chenxiang66@hisilicon.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-06scsi: hisi_sas: Don't send bcast events from HW during nexus HA resetJohn Garry1-4/+12
Remote devices may go missing from the per-device nexus reset part of the HA nexus, i.e after the controller reset. This is because libsas may find the devices to be gone as the phy may be temporarily down when processing the bcast event generated from the nexus reset. Filter out bcast events during this time to stop the devices being lost. Link: https://lore.kernel.org/r/1662378529-101489-6-git-send-email-john.garry@huawei.com Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-09-06scsi: hisi_sas: Add helper to process bcast eventsJohn Garry1-0/+12
Add a helper for bcast processing to reduce duplication. Link: https://lore.kernel.org/r/1662378529-101489-5-git-send-email-john.garry@huawei.com Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-09-06scsi: hisi_sas: Drain bcast events in hisi_sas_rescan_topology()John Garry1-0/+7
In resetting the controller, SATA devices may be lost. The issue is that when we insert the bcast events to rescan the topology in hisi_sas_rescan_topology(), when we subsequently nexus reset the SATA devices in hisi_sas_async_I_T_nexus_reset(), there is a small timing window in which the remote phy is down and we process the bcast event (meaning that libsas judges that the disk is lost). Ensure that all bcast events are processed prior to the nexus reset to close this window. Link: https://lore.kernel.org/r/1662378529-101489-4-git-send-email-john.garry@huawei.com Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-09-06scsi: hisi_sas: Clear HISI_SAS_HW_FAULT_BIT earlierJohn Garry1-1/+1
Once the controller HW has been reset then we can unset flag HISI_SAS_HW_FAULT_BIT. In clearing this flag earlier we can now successfully execute commands in hisi_sas_controller_reset_done(), like bcast processing. Link: https://lore.kernel.org/r/1662378529-101489-3-git-send-email-john.garry@huawei.com Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-07-18scsi: hisi_sas: Relocate DMA unmap of SMP taskXiang Chen1-1/+5
Currently SMP tasks are DMA unmapped only when cq of SMP I/O is returned normally. If the cq of SMP I/O is returned with exception actually SMP TAS is never unmapped. Relocate DMA unmap of SMP task to fix the issue. Link: https://lore.kernel.org/r/1657823002-139010-4-git-send-email-john.garry@huawei.com Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-07-18scsi: hisi_sas: Remove unnecessary variable to hold DMA map elementsXiang Chen1-25/+18
Use slot->n_elem to store the return value of dma_map_sg() for SSP and SMP IOs, and remove unnecessary variable n_elem_req. Link: https://lore.kernel.org/r/1657823002-139010-3-git-send-email-john.garry@huawei.com Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-05-19scsi: hisi_sas: Fix memory ordering in hisi_sas_task_deliver()John Garry1-0/+2
The memories for the slot should be observed to be written prior to observing the slot as ready. Prior to commit 26fc0ea74fcb ("scsi: libsas: Drop SAS_TASK_AT_INITIATOR"), we had a spin_lock() + spin_unlock() immediately before marking the slot as ready. The spin_unlock() - with release semantics - caused the slot memory to be observed to be written. Now that the spin_lock() + spin_unlock() is gone, use a smp_wmb(). Link: https://lore.kernel.org/r/1652774661-12935-1-git-send-email-john.garry@huawei.com Fixes: 26fc0ea74fcb ("scsi: libsas: Drop SAS_TASK_AT_INITIATOR") Reported-by: Yihang Li <liyihang6@hisilicon.com> Tested-by: Yihang Li <liyihang6@hisilicon.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-05-19scsi: hisi_sas: Fix rescan after deleting a diskJohn Garry1-29/+18
Removing an ATA device via sysfs means that the device may not be found through re-scanning: root@ubuntu:/home/john# lsscsi [0:0:0:0] disk SanDisk LT0200MO P404 /dev/sda [0:0:1:0] disk ATA HGST HUS724040AL A8B0 /dev/sdb [0:0:8:0] enclosu 12G SAS Expander RevB - root@ubuntu:/home/john# echo 1 > /sys/block/sdb/device/delete root@ubuntu:/home/john# echo "- - -" > /sys/class/scsi_host/host0/scan root@ubuntu:/home/john# lsscsi [0:0:0:0] disk SanDisk LT0200MO P404 /dev/sda [0:0:8:0] enclosu 12G SAS Expander RevB - root@ubuntu:/home/john# The problem is that the rescan of the device may conflict with the device in being re-initialized, as follows: - In the rescan we call hisi_sas_slave_alloc() in store_scan() -> sas_user_scan() -> [__]scsi_scan_target() -> scsi_probe_and_add_lunc() -> scsi_alloc_sdev() -> hisi_sas_slave_alloc() -> hisi_sas_init_device() In hisi_sas_init_device() we issue an IT nexus reset for ATA devices - That IT nexus causes the remote PHY to go down and this triggers a bcast event - In parallel libsas processes the bcast event, finds that the phy is down and marks the device as gone The hard reset issued in hisi_sas_init_device() is unncessary - as described in the code comment - so remove it. Also set dev status as HISI_SAS_DEV_NORMAL as the hisi_sas_init_device() call. Link: https://lore.kernel.org/r/1652354134-171343-4-git-send-email-john.garry@huawei.com Fixes: 36c6b7613ef1 ("scsi: hisi_sas: Initialise devices in .slave_alloc callback") Tested-by: Yihang Li <liyihang6@hisilicon.com> Reviewed-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-05-19scsi: hisi_sas: Use sas_ata_wait_after_reset() in IT nexus resetJohn Garry1-7/+12
We have seen errors like this when a SATA device is probed: [524.566298] hisi_sas_v3_hw 0000L74:02.0: erroneous completion iptt=4096 ... [524.582827] sas: TMF task open reject failed 500e004aaaaaaaa00 Since commit 21c7e972475e ("scsi: hisi_sas: Disable SATA disk phy for severe I_T nexus reset failure"), we issue an ATA softreset to disks after a phy reset to ensure that they are in sound working order. If the softreset is issued before the remote phy has come back up then the softreset will fail (errors as above). Remedy this by waiting for the phy to come back up after the reset. Link: https://lore.kernel.org/r/1652354134-171343-3-git-send-email-john.garry@huawei.com Tested-by: Yihang Li <liyihang6@hisilicon.com> Reviewed-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-03-29scsi: hisi_sas: Remove stray fallthrough annotationDan Carpenter1-1/+0
This case statement doesn't fall through any more so remove the fallthrough annotation. Link: https://lore.kernel.org/r/20220317075214.GC25237@kili Acked-by: John Garry <john.garry@huawei.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-03-14scsi: hisi_sas: Use libsas internal abort supportJohn Garry1-298/+155
Use the common libsas internal abort functionality. In addition, this driver has special handling for internal abort timeouts - specifically whether to reset the controller in that instance, so extend the API for that. Timeout is now increased to 20 * Hz from 6 * Hz. We also retry for failure now, but this should not make a difference. Link: https://lore.kernel.org/r/1647001432-239276-5-git-send-email-john.garry@huawei.com Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Acked-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-27scsi: hisi_sas: Change hisi_sas_control_phy() phyup timeoutXiang Chen1-1/+2
The time of phyup not only depends on the controller but also the type of disk connected. As an example, from experience, for some SATA disks the amount of time from reset/power-on to receive the D2H FIS for phyup can take upto and more than 10s sometimes. According to the specification of some SATA disks such as ST14000NM0018, the max time from power-on to ready is 30s. Based on this the current timeout of phyup at 2s which is not enough. So set the value as HISI_SAS_WAIT_PHYUP_TIMEOUT (30s) in hisi_sas_control_phy(). For v3 hw there is a pre-existing workaround for a HW bug, being that we issue a link reset when the OOB occurs but the phyup does not. The current phyup timeout is HISI_SAS_WAIT_PHYUP_TIMEOUT. So if this does occur from when issuing a phy enable or similar via hisi_sas_control_phy(), the subsequent HW workaround linkreset processing calls hisi_sas_control_phy(), but this will pend the original phy reset timing out, so it is safe. Link: https://lore.kernel.org/r/1645703489-87194-3-git-send-email-john.garry@huawei.com Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-22scsi: libsas: Add sas_execute_ata_cmd()John Garry1-127/+3
Add a function to execute an ATA command using the TMF code, and use in the hisi_sas driver. That driver needs to be able to issue the command on a specific phy, so add an interface for that. With that, hisi_sas_exec_internal_tmf_task() may be deleted. Link: https://lore.kernel.org/r/1645534259-27068-19-git-send-email-john.garry@huawei.com Tested-by: Yihang Li <liyihang6@hisilicon.com> Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-19scsi: libsas: Add sas_abort_task()John Garry1-26/+1
Add a generic implementation of abort task TMF handler, and use in LLDDs. With that, some LLDDs custom TMF functions can now be deleted. Link: https://lore.kernel.org/r/1645112566-115804-18-git-send-email-john.garry@huawei.com Tested-by: Yihang Li <liyihang6@hisilicon.com> Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-19scsi: libsas: Add sas_query_task()John Garry1-11/+1
Add a generic implementation of query task TMF handler, and use in LLDDs. Link: https://lore.kernel.org/r/1645112566-115804-17-git-send-email-john.garry@huawei.com Tested-by: Yihang Li <liyihang6@hisilicon.com> Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-19scsi: libsas: Add sas_lu_reset()John Garry1-3/+1
Add a generic implementation of LU reset TMF handler, and use in LLDDs. Link: https://lore.kernel.org/r/1645112566-115804-16-git-send-email-john.garry@huawei.com Tested-by: Yihang Li <liyihang6@hisilicon.com> Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-19scsi: libsas: Add sas_clear_task_set()John Garry1-4/+1
Add a generic implementation of clear task set TMF handler, and use in LLDDs. Link: https://lore.kernel.org/r/1645112566-115804-15-git-send-email-john.garry@huawei.com Tested-by: Yihang Li <liyihang6@hisilicon.com> Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-19scsi: libsas: Add sas_abort_task_set()John Garry1-4/+1
Add a generic implementation of abort task set TMF handler, and use in LLDDs. Link: https://lore.kernel.org/r/1645112566-115804-14-git-send-email-john.garry@huawei.com Tested-by: Yihang Li <liyihang6@hisilicon.com> Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-19scsi: libsas: Add TMF handler aborted callbackJohn Garry1-0/+20
The hisi_sas and pm8001 TMF handlers have some special processing for when the TMF is aborted, so add a callback and fill it in for those drivers. Link: https://lore.kernel.org/r/1645112566-115804-13-git-send-email-john.garry@huawei.com Tested-by: Yihang Li <liyihang6@hisilicon.com> Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-19scsi: libsas: Add sas_task.tmfJohn Garry1-10/+6
Add a pointer to a sas_tmf_task to the sas_task struct, as this will be used when the common LLDD TMF code is factored out. Also set it for the LLDDs to store per-sas_task TMF info. Link: https://lore.kernel.org/r/1645112566-115804-9-git-send-email-john.garry@huawei.com Tested-by: Yihang Li <liyihang6@hisilicon.com> Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-19scsi: libsas: Add struct sas_tmf_taskJohn Garry1-11/+11
Some of the LLDDs which use libsas have their own definition of a struct to hold TMF info, so add a common struct for libsas. Also add an interim force phy id field for hisi_sas driver, which will be removed once the STP "TMF" code is factored out. Even though some LLDDs (pm8001) use a u32 for the tag, u16 will be adequate, as that named driver only uses tags in range [0, 1024). Link: https://lore.kernel.org/r/1645112566-115804-8-git-send-email-john.garry@huawei.com Tested-by: Yihang Li <liyihang6@hisilicon.com> Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-19scsi: hisi_sas: Delete unused I_T_NEXUS_RESET_PHYUP_TIMEOUTJohn Garry1-2/+0
There is no user, so delete it. Link: https://lore.kernel.org/r/1645112566-115804-6-git-send-email-john.garry@huawei.com Tested-by: Yihang Li <liyihang6@hisilicon.com> Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-19scsi: libsas: Delete lldd_clear_aca callbackJohn Garry1-12/+0
This callback is never called, so remove support. Link: https://lore.kernel.org/r/1645112566-115804-4-git-send-email-john.garry@huawei.com Tested-by: Yihang Li <liyihang6@hisilicon.com> Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by: Jack Wang <jinpu.wang@ionos.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-14Merge branch '5.17/scsi-fixes' into 5.18/scsi-stagingMartin K. Petersen1-11/+6
Pull 5.17 fixes branch into 5.18 tree to resolve a few pm8001 driver merge conflicts. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-11scsi: libsas: Drop SAS_TASK_AT_INITIATORJohn Garry1-7/+1
This flag is now only ever set, so delete it. This also avoids a use-after-free in the pm8001 queue path, as reported in the following: https://lore.kernel.org/linux-scsi/c3cb7228-254e-9584-182b-007ac5e6fe0a@huawei.com/T/#m28c94c6d3ff582ec4a9fa54819180740e8bd4cfb https://lore.kernel.org/linux-scsi/0cc0c435-b4f2-9c76-258d-865ba50a29dd@huawei.com/ [mkp: checkpatch + two SAS_TASK_AT_INITIATOR references] Link: https://lore.kernel.org/r/1644489804-85730-3-git-send-email-john.garry@huawei.com Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-01-31scsi: hisi_sas: Fix setting of hisi_sas_slot.is_internalJohn Garry1-8/+6
The hisi_sas_slot.is_internal member is not set properly for ATA commands which the driver sends directly. A TMF struct pointer is normally used as a test to set this, but it is NULL for those commands. It's not ideal, but pass an empty TMF struct to set that member properly. Link: https://lore.kernel.org/r/1643627607-138785-1-git-send-email-john.garry@huawei.com Fixes: dc313f6b125b ("scsi: hisi_sas: Factor out task prep and delivery code") Reported-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-01-24scsi: hisi_sas: Remove useless DMA-32 fallback configurationChristophe JAILLET1-3/+0
As stated in [1], dma_set_mask() with a 64-bit mask never fails if dev->dma_mask is non-NULL. So, if it fails, the 32-bit case will also fail for the same reason. Simplify code and remove some dead code accordingly. [1]: https://lore.kernel.org/linux-kernel/YL3vSPK5DXTNvgdx@infradead.org/#t Link: https://lore.kernel.org/r/1bf2d3660178b0e6f172e5208bc0bd68d31d9268.1642237482.git.christophe.jaillet@wanadoo.fr Acked-by: John Garry <john.garry@huawei.com> Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-01-07scsi: hisi_sas: Remove unused variable and check in ↵Xiang Chen1-5/+0
hisi_sas_send_ata_reset_each_phy() In commit 29e2bac87421 ("scsi: hisi_sas: Fix some issues related to asd_sas_port->phy_list"), we use asd_sas_port->phy_mask instead of accessing asd_sas_port->phy_list, and it is enough to use asd_sas_port->phy_mask to check the state of phy, so remove the unused check and variable. Link: https://lore.kernel.org/r/1641300126-53574-1-git-send-email-chenxiang66@hisilicon.com Fixes: 29e2bac87421 ("scsi: hisi_sas: Fix some issues related to asd_sas_port->phy_list") Reported-by: Nathan Chancellor <nathan@kernel.org> Reported-by: Colin King <colin.i.king@gmail.com> Acked-by: John Garry <john.garry@huawei.com> Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-12-22scsi: hisi_sas: Keep controller active between ISR of phyup and the event ↵Xiang Chen1-2/+20
being processed It is possible that controller may become suspended between processing a phyup interrupt and the event being processed by libsas. As such, we can't ensure the controller is active when processing the phyup event - this may cause the phyup event to be lost or other issues. To avoid any possible issues, add pm_runtime_get_noresume() in phyup interrupt handler and pm_runtime_put_sync() in the work handler exit to ensure that we stay always active. Since we only want to call pm_runtime_get_noresume() for v3 hw, signal this will a new event, HISI_PHYE_PHY_UP_PM. Link: https://lore.kernel.org/r/1639999298-244569-14-git-send-email-chenxiang66@hisilicon.com Acked-by: John Garry <john.garry@huawei.com> Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-12-22scsi: hisi_sas: Fix some issues related to asd_sas_port->phy_listXiang Chen1-3/+8
Most places that use asd_sas_port->phy_list are protected by spinlock asd_sas_port->phy_list_lock, however there are still some places which miss grabbing the lock. Add it in function hisi_sas_refresh_port_id() when accessing asd_sas_port->phy_list. This carries a risk that list mutates while at the same time dropping the lock in function hisi_sas_send_ata_reset_each_phy(). Read asd_sas_port->phy_mask instead of accessing asd_sas_port->phy_list to avoid this risk. Link: https://lore.kernel.org/r/1639999298-244569-6-git-send-email-chenxiang66@hisilicon.com Acked-by: John Garry <john.garry@huawei.com> Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-12-22scsi: Revert "scsi: hisi_sas: Filter out new PHY up events during suspend"John Garry1-6/+0
This reverts commit b14a37e011d829404c29a5ae17849d7efb034893. In that commit, we had to filter out phy-up events during suspend, as it work cause a deadlock between processing the phyup event and the resume HA function try to drain the HA event workqueue to complete the resume process. Now that we no longer try to drain the HA event queue during the HA resume processor, the deadlock would not occur, so remove the special handling for it. Link: https://lore.kernel.org/r/1639999298-244569-3-git-send-email-chenxiang66@hisilicon.com Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-12-16scsi: hisi_sas: Fix phyup timeout on FPGAQi Liu1-5/+13
The OOB interrupt and phyup interrupt handlers may run out-of-order in high CPU usage scenarios. Since the hisi_sas_phy.timer is added in hisi_sas_phy_oob_ready() and disarmed in phy_up_v3_hw(), this out-of-order execution will cause hisi_sas_phy.timer timeout to trigger. To solve, protect hisi_sas_phy.timer and .attached with a lock, and ensure that the timer won't be added after phyup handler completes. Link: https://lore.kernel.org/r/1639579061-179473-8-git-send-email-john.garry@huawei.com Signed-off-by: Qi Liu <liuqi115@huawei.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-12-16scsi: hisi_sas: Prevent parallel FLR and controller resetQi Liu1-3/+5
If we issue a controller reset command during executing a FLR a hung task may be found: Call trace: __switch_to+0x158/0x1cc __schedule+0x2e8/0x85c schedule+0x7c/0x110 schedule_timeout+0x190/0x1cc __down+0x7c/0xd4 down+0x5c/0x7c hisi_sas_task_exec+0x510/0x680 [hisi_sas_main] hisi_sas_queue_command+0x24/0x30 [hisi_sas_main] smp_execute_task_sg+0xf4/0x23c [libsas] sas_smp_phy_control+0x110/0x1e0 [libsas] transport_sas_phy_reset+0xc8/0x190 [libsas] phy_reset_work+0x2c/0x40 [libsas] process_one_work+0x1dc/0x48c worker_thread+0x15c/0x464 kthread+0x160/0x170 ret_from_fork+0x10/0x18 This is a race condition which occurs when the FLR completes first. Here the host HISI_SAS_RESETTING_BIT flag out gets of sync as HISI_SAS_RESETTING_BIT is not always cleared with the hisi_hba.sem held, so now only set/unset HISI_SAS_RESETTING_BIT under hisi_hba.sem . Link: https://lore.kernel.org/r/1639579061-179473-7-git-send-email-john.garry@huawei.com Signed-off-by: Qi Liu <liuqi115@huawei.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-12-16scsi: hisi_sas: Prevent parallel controller reset and control phy commandQi Liu1-0/+2
A user may issue a control phy command from sysfs at any time, even if the controller is resetting. If a phy is disabled by hardreset/linkreset command before calling get_phys_state() in the reset path, the saved phy state may be incorrect. To avoid incorrectly recording the phy state, use hisi_hba.sem to ensure that the controller reset may not run at the same time as when the phy control function is running. Link: https://lore.kernel.org/r/1639579061-179473-6-git-send-email-john.garry@huawei.com Signed-off-by: Qi Liu <liuqi115@huawei.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-12-16scsi: hisi_sas: Factor out task prep and delivery codeJohn Garry1-157/+124
The task prep code is the same between the normal path (in hisi_sas_task_prep()) and the internal abort path, so factor is out into a common function. Link: https://lore.kernel.org/r/1639579061-179473-5-git-send-email-john.garry@huawei.com Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-12-16scsi: hisi_sas: Pass abort structure for internal abortJohn Garry1-9/+12
To help factor out code in future, it's useful to know if we're executing an internal abort, so pass a pointer to the structure. The idea is that a NULL pointer means not an internal abort. Link: https://lore.kernel.org/r/1639579061-179473-4-git-send-email-john.garry@huawei.com Reviewed-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-12-16scsi: hisi_sas: Make internal abort have no task protoJohn Garry1-1/+1
For an internal abort, the task does not have a protocol, so set to none. This will make it easier to differentiate internal abort tasks in future. Link: https://lore.kernel.org/r/1639579061-179473-3-git-send-email-john.garry@huawei.com Reviewed-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-12-16scsi: hisi_sas: Start delivery hisi_sas_task_exec() directlyJohn Garry1-11/+6
Currently we start delivery of commands to the DQ after returning from hisi_sas_task_exec() with success. Let's just start delivery directly in that function without having to check if some local variable is set. Link: https://lore.kernel.org/r/1639579061-179473-2-git-send-email-john.garry@huawei.com Reviewed-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-12-06scsi: hisi_sas: Use non-atomic bitmap functions when possibleChristophe JAILLET1-2/+2
All uses of the 'hisi_hba->slot_index_tags' bitmap are protected with the 'hisi_hba->lock' spinlock. Prefer the non-atomic '__[set|clear]_bit()' functions to save a few cycles. Link: https://lore.kernel.org/r/8ee33e463523db080e6a2c06f332e47abb69359b.1637961191.git.christophe.jaillet@wanadoo.fr Acked-by: John Garry <john.garry@huawei.com> Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-12-06scsi: hisi_sas: Remove some useless code in hisi_sas_alloc()Christophe JAILLET1-9/+0
The 'hisi_hba->slot_index_tags' bitmap is allocated with bitmap_zalloc() so it is already cleared. There is no need to clear it another time, one bit at a time. Remove the corresponding useless code. Link: https://lore.kernel.org/r/41c86e7e3e05a13bd586d8ee1b81296140b7a6eb.1637961191.git.christophe.jaillet@wanadoo.fr Acked-by: John Garry <john.garry@huawei.com> Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-12-06scsi: hisi_sas: Use devm_bitmap_zalloc() when applicableChristophe JAILLET1-3/+2
'hisi_hba->slot_index_tags' is a bitmap. Use 'devm_bitmap_zalloc()' to simplify code, improve the semantic, and avoid some open-coded arithmetic in allocator arguments. Link: https://lore.kernel.org/r/4afa3f71e66c941c660627c7f5b0223b51968ebb.1637961191.git.christophe.jaillet@wanadoo.fr Acked-by: John Garry <john.garry@huawei.com> Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-12scsi: hisi_sas: Disable SATA disk phy for severe I_T nexus reset failureLuo Jiaxing1-5/+24
If the softreset fails in the I_T reset, libsas will then continue to issue a controller reset to try to recover. However a faulty disk may cause the softreset to fail, and resetting the controller will not help this scenario. Indeed, we will just continue the cycle of error handle handling to try to recover. So if the softreset fails upon certain conditions, just disable the phy associated with the disk. The user needs to handle this problem. Link: https://lore.kernel.org/r/1634041588-74824-5-git-send-email-john.garry@huawei.com Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-12scsi: hisi_sas: Wait for phyup in hisi_sas_control_phy()Xiang Chen1-11/+32
When issuing a hardreset/linkreset/phy_set_linkrate from sysfs, the phy will be disabled and re-enabled for the directly attached scenario. It takes some time for the phy to come back up after re-enabling the phy. If the controller becomes suspended while waiting for the phy to come back, the phy up may be lost (along with the disk). To solve this problem, wait for the phy up to occur with a timeout. Indeed this is already done in hisi_sas_debug_I_T_nexus_reset() for local phys, so just relocate the functionality to hisi_sas_control_phy(). Since the HA workqueue is drained when suspending the controller, and the phy control function is called from the same workqueue, we can guarantee that the controller will not be suspended during this period. Link: https://lore.kernel.org/r/1634041588-74824-3-git-send-email-john.garry@huawei.com Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-12scsi: hisi_sas: Initialise devices in .slave_alloc callbackXiang Chen1-3/+14
Perform driver-specific SCSI device initialization in the designated SCSI midlayer callback instead of relying on the libsas "device found" callback. The SCSI midlayer .slave_alloc interface is called prior to sending any I/O to the device. Link: https://lore.kernel.org/r/1634041588-74824-2-git-send-email-john.garry@huawei.com Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-09-13scsi: hisi_sas: Replace del_timer() calls with del_timer_sync()Xiang Chen1-7/+5
Some usage of del_timer() in the driver is potentially unsafe. When running the sas_task->slow_task timer in hisi_sas_exec_internal_tmf_task(), execution may be blocked in function hisi_sas_task_exec(); so it is possible that the timer is running when the callback to disable the timer is running. This could be dangerous, as we immediately release resources which the timer callback uses after disabling the timer. The same situation may be found at other sites, such as _hisi_sas_internal_task_abort(). Change calls to del_timer() to del_timer_sync() as necessary, to ensure any timer has finished when disabling. Also remove calls to timer_pending() prior to del_timer() as it is not necessary. Link: https://lore.kernel.org/r/1629799260-120116-5-git-send-email-john.garry@huawei.com Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-09-13scsi: hisi_sas: Rename HISI_SAS_{RESET -> RESETTING}_BITLuo Jiaxing1-6/+6
HISI_SAS_RESET_BIT means that the controller is being reset, and so the name is a bit vague. Rename it to HISI_SAS_RESETTING_BIT. Link: https://lore.kernel.org/r/1629799260-120116-4-git-send-email-john.garry@huawei.com Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-11scsi: hisi_sas: Use scsi_cmd_to_rq() instead of scsi_cmnd.requestBart Van Assche1-2/+2
Prepare for removal of the request pointer by using scsi_cmd_to_rq() instead. This patch does not change any functionality. Link: https://lore.kernel.org/r/20210809230355.8186-22-bvanassche@acm.org Acked-by: John Garry <john.garry@huawei.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
generated by cgit v1.2.3 (git 2.25.1) at 2025-08-04 11:17:42 +0000