summaryrefslogtreecommitdiff
path: root/drivers/scsi/qla2xxx/qla_init.c
AgeCommit message (Collapse)AuthorFilesLines
2023-03-06scsi: qla2xxx: Add option to disable FC2 Target supportDaniel Wagner1-1/+2
Commit 44c57f205876 ("scsi: qla2xxx: Changes to support FCP2 Target") added support for FC2 Targets. Unfortunately, there are older setups which break with this new feature enabled. Allow to disable it via module option. Link: https://lore.kernel.org/r/20230208152014.109214-1-dwagner@suse.de Signed-off-by: Daniel Wagner <dwagner@suse.de> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-02-08scsi: qla2xxx: Remove the unused variable wwnJiapeng Chong1-2/+0
Variable wwn is not used. Delete it. drivers/scsi/qla2xxx/qla_init.c:1657:6: warning: variable 'wwn' set but not used. Link: https://lore.kernel.org/r/20230207052234.24535-1-jiapeng.chong@linux.alibaba.com Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-01-11scsi: qla2xxx: Select qpair depending on which CPU post_cmd() gets calledShreyas Deodhar1-2/+0
In current I/O path, Tx and Rx may not be processed on same CPU. This may lead to thrashing and optimum performance may not be achieved. Pick qpair such that Tx and Rx are processed on same CPU. Signed-off-by: Shreyas Deodhar <sdeodhar@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-01-11scsi: qla2xxx: edif: Fix performance dip due to lock contentionQuinn Tran1-0/+12
User experienced performance dip on measuring IOPS while EDIF enabled. During I/O time, driver uses dma_pool_zalloc() call to allocate a chunk of memory. This call contains a lock behind the scene which contribute to lock contention. Save the allocated memory for reuse and avoid the lock. Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-01-11scsi: qla2xxx: Relocate/rename vp mapQuinn Tran1-2/+2
There is no functional change in this patch. VP map resource is renamed and relocated so it is not viewed as just a target mode resource. Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-01-11scsi: qla2xxx: Remove dead code (GNN ID)Quinn Tran1-6/+1
Remove stale/unused code (GNN ID). Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-01-11scsi: qla2xxx: Remove dead code (GPNID)Quinn Tran1-1/+1
Remove stale unused code for GPNID. Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-01-11scsi: qla2xxx: Remove dead codeQuinn Tran1-48/+0
Removing drport field and FCPORT_UPDATE_NEEDED signals. Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-01-11scsi: qla2xxx: Remove unintended flag clearingQuinn Tran1-1/+0
FCF_ASYNC_SENT flag is used in session management. This flag is cleared in task management path by accident. Remove unintended flag clearing. Fixes: 388a49959ee4 ("scsi: qla2xxx: Fix panic from use after free in qla2x00_async_tm_cmd") Cc: stable@vger.kernel.org Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-01-11scsi: qla2xxx: Fix stalled loginQuinn Tran1-0/+6
If a login failed due to low FW resources, the session can stall and will not be connected. Reset session state to allow relogin logic to redrive the connection. Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-01-11scsi: qla2xxx: Fix exchange oversubscriptionQuinn Tran1-0/+13
In large environment, it is possible to experience command timeout and escalation of path recovery. Currently the driver does not track the number of exchanges/commands sent to FW. If there is a delay for commands at the head of the queue, then this will create back pressure for commands at the back of the queue. Check for exchange availability before command submission. Fixes: 89c72f4245a8 ("scsi: qla2xxx: Add IOCB resource tracking") Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-12-01scsi: qla2xxx: Fix crash when I/O abort times outArun Easi1-4/+10
While performing CPU hotplug, a crash with the following stack was seen: Call Trace: qla24xx_process_response_queue+0x42a/0x970 [qla2xxx] qla2x00_start_nvme_mq+0x3a2/0x4b0 [qla2xxx] qla_nvme_post_cmd+0x166/0x240 [qla2xxx] nvme_fc_start_fcp_op.part.0+0x119/0x2e0 [nvme_fc] blk_mq_dispatch_rq_list+0x17b/0x610 __blk_mq_sched_dispatch_requests+0xb0/0x140 blk_mq_sched_dispatch_requests+0x30/0x60 __blk_mq_run_hw_queue+0x35/0x90 __blk_mq_delay_run_hw_queue+0x161/0x180 blk_execute_rq+0xbe/0x160 __nvme_submit_sync_cmd+0x16f/0x220 [nvme_core] nvmf_connect_admin_queue+0x11a/0x170 [nvme_fabrics] nvme_fc_create_association.cold+0x50/0x3dc [nvme_fc] nvme_fc_connect_ctrl_work+0x19/0x30 [nvme_fc] process_one_work+0x1e8/0x3c0 On abort timeout, completion was called without checking if the I/O was already completed. Verify that I/O and abort request are indeed outstanding before attempting completion. Fixes: 71c80b75ce8f ("scsi: qla2xxx: Do command completion on abort timeout") Reported-by: Marco Patalano <mpatalan@redhat.com> Tested-by: Marco Patalano <mpatalan@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Arun Easi <aeasi@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Link: https://lore.kernel.org/r/20221129092634.15347-1-njavali@marvell.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-11-08scsi: qla2xxx: Remove unused variable 'found_devs'Colin Ian King1-4/+0
Variable 'found_devs' is just being incremented and it's never used anywhere else. Remove it. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Link: https://lore.kernel.org/r/20221101104733.30363-1-colin.i.king@gmail.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-11-08scsi: qla2xxx: Fix set-but-not-used variable warningsBart Van Assche1-4/+2
Fix the following two compiler warnings: drivers/scsi/qla2xxx/qla_init.c: In function ‘qla24xx_async_abort_cmd’: drivers/scsi/qla2xxx/qla_init.c:171:17: warning: variable ‘bail’ set but not used [-Wunused-but-set-variable] 171 | uint8_t bail; | ^~~~ drivers/scsi/qla2xxx/qla_init.c: In function ‘qla2x00_async_tm_cmd’: drivers/scsi/qla2xxx/qla_init.c:2023:17: warning: variable ‘bail’ set but not used [-Wunused-but-set-variable] 2023 | uint8_t bail; | ^~~~ Cc: Arun Easi <arun.easi@qlogic.com> Cc: Giridhar Malavali <giridhar.malavali@qlogic.com> Fixes: feafb7b1714c ("[SCSI] qla2xxx: Fix vport delete issues") Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20221031224818.2607882-1-bvanassche@acm.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-09-01scsi: qla2xxx: Add NVMe parameters support in Auxiliary Image StatusAnil Gurumurthy1-2/+6
Add new API to obtain the NVMe Parameters region status from the Auxiliary Image Status bitmap. Link: https://lore.kernel.org/r/20220826102559.17474-5-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Anil Gurumurthy <agurumurthy@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-07-18scsi: qla2xxx: Fix discovery issues in FC-AL topologyArun Easi1-0/+29
A direct attach tape device, when gets swapped with another, was not discovered. Fix this by looking at loop map and reinitialize link if there are devices present. Link: https://lore.kernel.org/linux-scsi/baef87c3-5dad-3b47-44c1-6914bfc90108@cybernetics.com/ Link: https://lore.kernel.org/r/20220713052045.10683-8-njavali@marvell.com Cc: stable@vger.kernel.org Reported-by: Tony Battersby <tonyb@cybernetics.com> Tested-by: Tony Battersby <tonyb@cybernetics.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Arun Easi <aeasi@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-07-18scsi: qla2xxx: Fix imbalance vha->vref_countQuinn Tran1-0/+4
vref_count took an extra decrement in the task management path. Add an extra ref count to compensate the imbalance. Link: https://lore.kernel.org/r/20220713052045.10683-7-njavali@marvell.com Cc: stable@vger.kernel.org Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-07-18scsi: qla2xxx: Fix incorrect display of max frame sizeBikash Hazarika1-0/+2
Replace display field with the correct field. Link: https://lore.kernel.org/r/20220713052045.10683-3-njavali@marvell.com Fixes: 8777e4314d39 ("scsi: qla2xxx: Migrate NVME N2N handling into state machine") Cc: stable@vger.kernel.org Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Bikash Hazarika <bhazarika@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-07-18scsi: Revert "scsi: qla2xxx: Fix disk failure to rediscover"Nilesh Javali1-3/+2
This fixes the regression of NVMe discovery failure during driver load time. This reverts commit 6a45c8e137d4e2c72eecf1ac7cf64f2fdfcead99. Link: https://lore.kernel.org/r/20220713052045.10683-2-njavali@marvell.com Cc: stable@vger.kernel.org Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-16scsi: qla2xxx: Fix losing FCP-2 targets on long port disable with I/OsArun Easi1-4/+8
FCP-2 devices were not coming back online once they were lost, login retries exhausted, and then came back up. Fix this by accepting RSCN when the device is not online. Link: https://lore.kernel.org/r/20220616053508.27186-10-njavali@marvell.com Fixes: 44c57f205876 ("scsi: qla2xxx: Changes to support FCP2 Target") Cc: stable@vger.kernel.org Signed-off-by: Arun Easi <aeasi@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-16scsi: qla2xxx: Wind down adapter after PCIe errorQuinn Tran1-0/+20
Put adapter into a wind down state if OS does not make any attempt to recover the adapter after PCIe error. Link: https://lore.kernel.org/r/20220616053508.27186-4-njavali@marvell.com Cc: stable@vger.kernel.org Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-16scsi: qla2xxx: Add a new v2 dport diagnostic featureBikash Hazarika1-0/+3
FW requires minimum 72 bytes buffer size for D_port result. Buffer size 1024 is mentioned in the FW spec so buffer size is increased to 1024. Rewrite the logic to handle START/RESTART command from SDMAPI. Link: https://lore.kernel.org/r/20220616053508.27186-3-njavali@marvell.com Signed-off-by: Bikash Hazarika <bhazarika@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-10scsi: qla2xxx: edif: Fix session thrashQuinn Tran1-1/+9
Current code prematurely sends out PRLI before authentication application has given the OK to do so. This causes PRLI failure and session teardown. Prevents PRLI from going out before authentication app gives the OK. Link: https://lore.kernel.org/r/20220608115849.16693-7-njavali@marvell.com Fixes: 91f6f5fbe87b ("scsi: qla2xxx: edif: Reduce connection thrash") Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-07scsi: qla2xxx: edif: Fix n2n login retry for secure deviceQuinn Tran1-0/+7
After initiator has burned up all login retries, target authentication application begins to run. This triggers a link bounce on target side. Initiator will attempt another login. Due to N2N, the PRLI [nvme | fcp] can fail because of the mode mismatch with target. This patch add a few more login retries to revive the connection. Link: https://lore.kernel.org/r/20220607044627.19563-11-njavali@marvell.com Fixes: 4de067e5df12 ("scsi: qla2xxx: edif: Add N2N support for EDIF") Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-07scsi: qla2xxx: edif: Wait for app to ack on sess downQuinn Tran1-4/+0
On session deletion, wait for app to acknowledge before moving on. This allows both app and driver to stay in sync. In addition, this gives a chance for authentication app to do any type of cleanup before moving on. Link: https://lore.kernel.org/r/20220607044627.19563-4-njavali@marvell.com Fixes: dd30706e73b7 ("scsi: qla2xxx: edif: Add key update") Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-03-15scsi: qla2xxx: Fix stuck session of PRLI rejectQuinn Tran1-7/+0
Remove stale recovery code that prevents normal path recovery. Link: https://lore.kernel.org/r/20220310092604.22950-11-njavali@marvell.com Fixes: 1cbc0efcd9be ("scsi: qla2xxx: Fix retry for PRLI RJT with reason of BUSY") Cc: stable@vger.kernel.org Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-03-15scsi: qla2xxx: Reduce false trigger to loginQuinn Tran1-2/+3
While a session is in the middle of a relogin, a late RSCN can be delivered from switch. RSCN trigger fabric scan where the scan logic can trigger another session login while a login is in progress. Reduce the extra trigger to prevent multiple logins to the same session. Link: https://lore.kernel.org/r/20220310092604.22950-10-njavali@marvell.com Fixes: bee8b84686c4 ("scsi: qla2xxx: Reduce redundant ADISC command for RSCNs") Cc: stable@vger.kernel.org Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-03-15scsi: qla2xxx: Fix hang due to session stuckQuinn Tran1-2/+17
User experienced device lost. The log shows Get port data base command was queued up, failed, and requeued again. Every time it is requeued, it set the FCF_ASYNC_ACTIVE. This prevents any recovery code from occurring because driver thinks a recovery is in progress for this session. In essence, this session is hung. The reason it gets into this place is the session deletion got in front of this call due to link perturbation. Break the requeue cycle and exit. The session deletion code will trigger a session relogin. Link: https://lore.kernel.org/r/20220310092604.22950-8-njavali@marvell.com Fixes: 726b85487067 ("qla2xxx: Add framework for async fabric discovery") Cc: stable@vger.kernel.org Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-03-15scsi: qla2xxx: Fix disk failure to rediscoverQuinn Tran1-2/+3
User experienced some of the LUN failed to get rediscovered after long cable pull test. The issue is triggered by a race condition between driver setting session online state vs starting the LUN scan process at the same time. Current code set the online state after notifying the session is available. In this case, trigger to start the LUN scan process happened before driver could set the session in online state. LUN scan ends up with failure due to the session online check was failing. Set the online state before reporting of the availability of the session. Link: https://lore.kernel.org/r/20220310092604.22950-3-njavali@marvell.com Fixes: aecf043443d3 ("scsi: qla2xxx: Fix Remote port registration") Cc: stable@vger.kernel.org Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-22scsi: qla2xxx: Use named initializers for q_dev_stateGleb Chesnokov1-26/+2
Make q_dev_state a little more readable and maintainable by using named initializers. Also convert QLA8XXX_DEV_* macros into an enum and remove qla83xx_dev_state_to_string(), which is a duplicate of qdev_state(). Link: https://lore.kernel.org/r/AS8PR10MB495298515A7553C8D6D6E74D9D349@AS8PR10MB4952.EURPRD10.PROD.OUTLOOK.COM Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Gleb Chesnokov <Chesnokov.G@raidix.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-01-24scsi: qla2xxx: Check for firmware dump already collectedJoe Carnuccio1-0/+8
While allocating firmware dump, check if dump is already collected and do not re-allocate the buffer. Link: https://lore.kernel.org/r/20220110050218.3958-17-njavali@marvell.com Cc: stable@vger.kernel.org Signed-off-by: Joe Carnuccio <joe.carnuccio@cavium.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-01-24scsi: qla2xxx: Add devids and conditionals for 28xxJoe Carnuccio1-5/+3
This is an update to the original 28xx adapter enablement. Add a bunch of conditionals that are applicable for 28xx. Link: https://lore.kernel.org/r/20220110050218.3958-16-njavali@marvell.com Fixes: ecc89f25e225 ("scsi: qla2xxx: Add Device ID for ISP28XX") Cc: stable@vger.kernel.org Signed-off-by: Joe Carnuccio <joe.carnuccio@cavium.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-01-24scsi: qla2xxx: Suppress a kernel complaint in qla_create_qpair()Saurav Kashyap1-1/+1
[ 12.323788] BUG: using smp_processor_id() in preemptible [00000000] code: systemd-udevd/1020 [ 12.332297] caller is qla2xxx_create_qpair+0x32a/0x5d0 [qla2xxx] [ 12.338417] CPU: 7 PID: 1020 Comm: systemd-udevd Tainted: G I --------- --- 5.14.0-29.el9.x86_64 #1 [ 12.348827] Hardware name: Dell Inc. PowerEdge R610/0F0XJ6, BIOS 6.6.0 05/22/2018 [ 12.356356] Call Trace: [ 12.358821] dump_stack_lvl+0x34/0x44 [ 12.362514] check_preemption_disabled+0xd9/0xe0 [ 12.367164] qla2xxx_create_qpair+0x32a/0x5d0 [qla2xxx] [ 12.372481] qla2x00_probe_one+0xa3a/0x1b80 [qla2xxx] [ 12.377617] ? _raw_spin_lock_irqsave+0x19/0x40 [ 12.384284] local_pci_probe+0x42/0x80 [ 12.390162] ? pci_match_device+0xd7/0x110 [ 12.396366] pci_device_probe+0xfd/0x1b0 [ 12.402372] really_probe+0x1e7/0x3e0 [ 12.408114] __driver_probe_device+0xfe/0x180 [ 12.414544] driver_probe_device+0x1e/0x90 [ 12.420685] __driver_attach+0xc0/0x1c0 [ 12.426536] ? __device_attach_driver+0xe0/0xe0 [ 12.433061] ? __device_attach_driver+0xe0/0xe0 [ 12.439538] bus_for_each_dev+0x78/0xc0 [ 12.445294] bus_add_driver+0x12b/0x1e0 [ 12.451021] driver_register+0x8f/0xe0 [ 12.456631] ? 0xffffffffc07bc000 [ 12.461773] qla2x00_module_init+0x1be/0x229 [qla2xxx] [ 12.468776] do_one_initcall+0x44/0x200 [ 12.474401] ? load_module+0xad3/0xba0 [ 12.479908] ? kmem_cache_alloc_trace+0x45/0x410 [ 12.486268] do_init_module+0x5c/0x280 [ 12.491730] __do_sys_init_module+0x12e/0x1b0 [ 12.497785] do_syscall_64+0x3b/0x90 [ 12.503029] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 12.509764] RIP: 0033:0x7f554f73ab2e Link: https://lore.kernel.org/r/20220110050218.3958-15-njavali@marvell.com Cc: stable@vger.kernel.org Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Saurav Kashyap <skashyap@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-01-24scsi: qla2xxx: Fix device reconnect in loop topologyArun Easi1-0/+15
A device logout in loop topology initiates a device connection teardown which loses the FW device handle. In loop topo, the device handle is not regrabbed leading to device login failures and eventually to loss of the device. Fix this by taking the main login path that does it. Link: https://lore.kernel.org/r/20220110050218.3958-11-njavali@marvell.com Cc: stable@vger.kernel.org Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Arun Easi <aeasi@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-01-24scsi: qla2xxx: Fix scheduling while atomicQuinn Tran1-6/+1
The driver makes a call into midlayer (fc_remote_port_delete) which can put the thread to sleep. The thread that originates the call is in interrupt context. The combination of the two trigger a crash. Schedule the call in non-interrupt context where it is more safe. kernel: BUG: scheduling while atomic: swapper/7/0/0x00010000 kernel: Call Trace: kernel: <IRQ> kernel: dump_stack+0x66/0x81 kernel: __schedule_bug.cold.90+0x5/0x1d kernel: __schedule+0x7af/0x960 kernel: schedule+0x28/0x80 kernel: schedule_timeout+0x26d/0x3b0 kernel: wait_for_completion+0xb4/0x140 kernel: ? wake_up_q+0x70/0x70 kernel: __wait_rcu_gp+0x12c/0x160 kernel: ? sdev_evt_alloc+0xc0/0x180 [scsi_mod] kernel: synchronize_sched+0x6c/0x80 kernel: ? call_rcu_bh+0x20/0x20 kernel: ? __bpf_trace_rcu_invoke_callback+0x10/0x10 kernel: sdev_evt_alloc+0xfd/0x180 [scsi_mod] kernel: starget_for_each_device+0x85/0xb0 [scsi_mod] kernel: ? scsi_init_io+0x360/0x3d0 [scsi_mod] kernel: scsi_init_io+0x388/0x3d0 [scsi_mod] kernel: device_for_each_child+0x54/0x90 kernel: fc_remote_port_delete+0x70/0xe0 [scsi_transport_fc] kernel: qla2x00_schedule_rport_del+0x62/0xf0 [qla2xxx] kernel: qla2x00_mark_device_lost+0x9c/0xd0 [qla2xxx] kernel: qla24xx_handle_plogi_done_event+0x55f/0x570 [qla2xxx] kernel: qla2x00_async_login_sp_done+0xd2/0x100 [qla2xxx] kernel: qla24xx_logio_entry+0x13a/0x3c0 [qla2xxx] kernel: qla24xx_process_response_queue+0x306/0x400 [qla2xxx] kernel: qla24xx_msix_rsp_q+0x3f/0xb0 [qla2xxx] kernel: __handle_irq_event_percpu+0x40/0x180 kernel: handle_irq_event_percpu+0x30/0x80 kernel: handle_irq_event+0x36/0x60 Link: https://lore.kernel.org/r/20220110050218.3958-7-njavali@marvell.com Cc: stable@vger.kernel.org Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-01-24scsi: qla2xxx: Fix warning message due to adisc being flushedQuinn Tran1-0/+6
Fix warning message due to adisc being flushed. Linux kernel triggered a warning message where a different error code type is not matching up with the expected type. Add additional translation of one error code type to another. WARNING: CPU: 2 PID: 1131623 at drivers/scsi/qla2xxx/qla_init.c:498 qla2x00_async_adisc_sp_done+0x294/0x2b0 [qla2xxx] CPU: 2 PID: 1131623 Comm: drmgr Not tainted 5.13.0-rc1-autotest #1 .. GPR28: c000000aaa9c8890 c0080000079ab678 c00000140a104800 c00000002bd19000 NIP [c00800000790857c] qla2x00_async_adisc_sp_done+0x294/0x2b0 [qla2xxx] LR [c008000007908578] qla2x00_async_adisc_sp_done+0x290/0x2b0 [qla2xxx] Call Trace: [c00000001cdc3620] [c008000007908578] qla2x00_async_adisc_sp_done+0x290/0x2b0 [qla2xxx] (unreliable) [c00000001cdc3710] [c0080000078f3080] __qla2x00_abort_all_cmds+0x1b8/0x580 [qla2xxx] [c00000001cdc3840] [c0080000078f589c] qla2x00_abort_all_cmds+0x34/0xd0 [qla2xxx] [c00000001cdc3880] [c0080000079153d8] qla2x00_abort_isp_cleanup+0x3f0/0x570 [qla2xxx] [c00000001cdc3920] [c0080000078fb7e8] qla2x00_remove_one+0x3d0/0x480 [qla2xxx] [c00000001cdc39b0] [c00000000071c274] pci_device_remove+0x64/0x120 [c00000001cdc39f0] [c0000000007fb818] device_release_driver_internal+0x168/0x2a0 [c00000001cdc3a30] [c00000000070e304] pci_stop_bus_device+0xb4/0x100 [c00000001cdc3a70] [c00000000070e4f0] pci_stop_and_remove_bus_device+0x20/0x40 [c00000001cdc3aa0] [c000000000073940] pci_hp_remove_devices+0x90/0x130 [c00000001cdc3b30] [c0080000070704d0] disable_slot+0x38/0x90 [rpaphp] [ c00000001cdc3b60] [c00000000073eb4c] power_write_file+0xcc/0x180 [c00000001cdc3be0] [c0000000007354bc] pci_slot_attr_store+0x3c/0x60 [c00000001cdc3c00] [c00000000055f820] sysfs_kf_write+0x60/0x80 [c00000001cdc3c20] [c00000000055df10] kernfs_fop_write_iter+0x1a0/0x290 [c00000001cdc3c70] [c000000000447c4c] new_sync_write+0x14c/0x1d0 [c00000001cdc3d10] [c00000000044b134] vfs_write+0x224/0x330 [c00000001cdc3d60] [c00000000044b3f4] ksys_write+0x74/0x130 [c00000001cdc3db0] [c00000000002df70] system_call_exception+0x150/0x2d0 [c00000001cdc3e10] [c00000000000d45c] system_call_common+0xec/0x278 Link: https://lore.kernel.org/r/20220110050218.3958-5-njavali@marvell.com Cc: stable@vger.kernel.org Reported-by: Abdul Haleem <abdhalee@linux.vnet.ibm.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-01-24scsi: qla2xxx: Fix stuck session in gpdbQuinn Tran1-3/+3
Fix stuck sessions in get port database. When a thread is in the process of re-establishing a session, a flag is set to prevent multiple threads / triggers from doing the same task. This flag was left on, where any attempt to relogin was locked out. Clear this flag, if the attempt has failed. Link: https://lore.kernel.org/r/20220110050218.3958-4-njavali@marvell.com Cc: stable@vger.kernel.org Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-01-24scsi: qla2xxx: Implement ref count for SRBSaurav Kashyap1-21/+49
The timeout handler and the done function are racing. When qla2x00_async_iocb_timeout() starts to run it can be preempted by the normal response path (via the firmware?). qla24xx_async_gpsc_sp_done() releases the SRB unconditionally. When scheduling back to qla2x00_async_iocb_timeout() qla24xx_async_abort_cmd() will access an freed sp->qpair pointer: qla2xxx [0000:83:00.0]-2871:0: Async-gpsc timeout - hdl=63d portid=234500 50:06:0e:80:08:77:b6:21. qla2xxx [0000:83:00.0]-2853:0: Async done-gpsc res 0, WWPN 50:06:0e:80:08:77:b6:21 qla2xxx [0000:83:00.0]-2854:0: Async-gpsc OUT WWPN 20:45:00:27:f8:75:33:00 speeds=2c00 speed=0400. qla2xxx [0000:83:00.0]-28d8:0: qla24xx_handle_gpsc_event 50:06:0e:80:08:77:b6:21 DS 7 LS 6 rc 0 login 1|1 rscn 1|0 lid 5 BUG: unable to handle kernel NULL pointer dereference at 0000000000000004 IP: qla24xx_async_abort_cmd+0x1b/0x1c0 [qla2xxx] Obvious solution to this is to introduce a reference counter. One reference is taken for the normal code path (the 'good' case) and one for the timeout path. As we always race between the normal good case and the timeout/abort handler we need to serialize it. Also we cannot assume any order between the handlers. Since this is slow path we can use proper synchronization via locks. When we are able to cancel a timer (del_timer returns 1) we know there can't be any error handling in progress because the timeout handler hasn't expired yet, thus we can safely decrement the refcounter by one. If we are not able to cancel the timer, we know an abort handler is running. We have to make sure we call sp->done() in the abort handlers before calling kref_put(). Link: https://lore.kernel.org/r/20220110050218.3958-3-njavali@marvell.com Cc: stable@vger.kernel.org Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Co-developed-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Saurav Kashyap <skashyap@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-01-24scsi: qla2xxx: Refactor asynchronous command initializationDaniel Wagner1-52/+25
Move common open-coded asynchronous command initializing code such as setting up the timer and the done callback into one function. This is a preparation step and allows us later on to change the low level error flow handling at a central place. Link: https://lore.kernel.org/r/20220110050218.3958-2-njavali@marvell.com Cc: stable@vger.kernel.org Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Saurav Kashyap <skashyap@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-12-16scsi: qla2xxx: Synchronize rport dev_loss_tmo settingHannes Reinecke1-7/+3
Currently, the dev_loss_tmo setting is only ever used for SCSI devices. This patch reshuffles initialisation such that the SCSI remote ports are registered before the NVMe ones, allowing the dev_loss_tmo setting to be synchronized between SCSI and NVMe. Link: https://lore.kernel.org/r/20211214111139.52503-1-dwagner@suse.de Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-26scsi: qla2xxx: edif: Fix inconsistent check of db_flagsQuinn Tran1-7/+6
db_flags field is a bit field. Replace value check with bit flag check. Link: https://lore.kernel.org/r/20211026115412.27691-12-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-26scsi: qla2xxx: edif: Increase ELS payloadQuinn Tran1-0/+4
Currently, firmware limits ELS payload to FC frame size/2112. This patch adjusts memory buffer size to be able to handle max ELS payload. Link: https://lore.kernel.org/r/20211026115412.27691-11-njavali@marvell.com Fixes: 84318a9f01ce ("scsi: qla2xxx: edif: Add send, receive, and accept for auth_els") Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-26scsi: qla2xxx: edif: Reduce connection thrashQuinn Tran1-2/+22
On ipsec start by remote port, target port may use RSCN to trigger initiator to relogin. If driver is already in the process of a relogin, then ignore the RSCN and allow the current relogin to continue. This reduces thrashing of the connection. Link: https://lore.kernel.org/r/20211026115412.27691-10-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-26scsi: qla2xxx: edif: Tweak trace messageQuinn Tran1-6/+9
Modify trace messages for additional debugability. Link: https://lore.kernel.org/r/20211026115412.27691-9-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-26scsi: qla2xxx: Fix gnl list corruptionQuinn Tran1-3/+1
Current code does list element deletion and addition in and out of lock protection. This patch moves deletion behind lock. list_add double add: new=ffff9130b5eb89f8, prev=ffff9130b5eb89f8, next=ffff9130c6a715f0. ------------[ cut here ]------------ kernel BUG at lib/list_debug.c:31! invalid opcode: 0000 [#1] SMP PTI CPU: 1 PID: 182395 Comm: kworker/1:37 Kdump: loaded Tainted: G W OE --------- - - 4.18.0-193.el8.x86_64 #1 Hardware name: HP ProLiant DL160 Gen8, BIOS J03 02/10/2014 Workqueue: qla2xxx_wq qla2x00_iocb_work_fn [qla2xxx] RIP: 0010:__list_add_valid+0x41/0x50 Code: 85 94 00 00 00 48 39 c7 74 0b 48 39 d7 74 06 b8 01 00 00 00 c3 48 89 f2 4c 89 c1 48 89 fe 48 c7 c7 60 83 ad 97 e8 4d bd ce ff <0f> 0b 0f 1f 00 66 2e 0f 1f 84 00 00 00 00 00 48 8b 07 48 8b 57 08 RSP: 0018:ffffaba306f47d68 EFLAGS: 00010046 RAX: 0000000000000058 RBX: ffff9130b5eb8800 RCX: 0000000000000006 RDX: 0000000000000000 RSI: 0000000000000096 RDI: ffff9130b7456a00 RBP: ffff9130c6a70a58 R08: 000000000008d7be R09: 0000000000000001 R10: 0000000000000000 R11: 0000000000000001 R12: ffff9130c6a715f0 R13: ffff9130b5eb8824 R14: ffff9130b5eb89f8 R15: ffff9130b5eb89f8 FS: 0000000000000000(0000) GS:ffff9130b7440000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007efcaaef11a0 CR3: 000000005200a002 CR4: 00000000000606e0 Call Trace: qla24xx_async_gnl+0x113/0x3c0 [qla2xxx] ? qla2x00_iocb_work_fn+0x53/0x80 [qla2xxx] ? process_one_work+0x1a7/0x3b0 ? worker_thread+0x30/0x390 ? create_worker+0x1a0/0x1a0 ? kthread+0x112/0x130 Link: https://lore.kernel.org/r/20211026115412.27691-3-njavali@marvell.com Fixes: 726b85487067 ("qla2xxx: Add framework for async fabric discovery") Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-26scsi: qla2xxx: Relogin during fabric disturbanceQuinn Tran1-9/+45
For RSCN of type "Area, Domain, or Fabric", which indicate a portion or entire fabric was disturbed, current driver does not set the scan_need flag to indicate a session was affected by the disturbance. This in turn can lead to I/O timeout and delay of relogin. Hence initiate relogin in the event of fabric disturbance. Link: https://lore.kernel.org/r/20211026115412.27691-2-njavali@marvell.com Fixes: 1560bafdff9e ("scsi: qla2xxx: Use complete switch scan for RSCN events") Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-12Merge branch '5.15/scsi-fixes' into 5.16/scsi-stagingMartin K. Petersen1-1/+2
Merge the 5.15/scsi-fixes branch into the staging tree to resolve UFS conflict reported by sfr. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-09-21scsi: qla2xxx: Restore initiator in dual modeDmitry Bogdanov1-1/+2
In dual mode in case of disabling the target, the whole port goes offline and initiator is turned off too. Fix restoring initiator mode after disabling target in dual mode. Link: https://lore.kernel.org/r/20210915153239.8035-1-d.bogdanov@yadro.com Fixes: 0645cb8350cd ("scsi: qla2xxx: Add mode control for each physical port") Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-09-14scsi: qla2xxx: Move heartbeat handling from DPC thread to workqueueManish Rangankar1-0/+2
DPC thread gets restricted due to a no-op mailbox, which is a blocking call and has a high execution frequency. To free up the DPC thread we move no-op handling to the workqueue. Also, modified qla_do_heartbeat() to send no-op MBC if we don’t have any active interrupts, but there are still I/Os outstanding with firmware. Link: https://lore.kernel.org/r/20210908164622.19240-9-njavali@marvell.com Fixes: d94d8158e184 ("scsi: qla2xxx: Add heartbeat check") Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Manish Rangankar <mrangankar@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-09-14scsi: qla2xxx: edif: Use link event to wake up appQuinn Tran1-8/+7
Authentication application may be running and in the past tried to probe driver (app_start) but was unsuccessful. This could be due to the bsg layer not being ready to service the request. On a successful link up, driver will use the netlink Link Up event to notify the app to retry the app_start call. In another case, app does not poll for new NPIV host. This link up event would notify app of the presence of a new SCSI host. Link: https://lore.kernel.org/r/20210908164622.19240-6-njavali@marvell.com Fixes: 4de067e5df12 ("scsi: qla2xxx: edif: Add N2N support for EDIF") Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
generated by cgit v1.2.3 (git 2.25.1) at 2025-09-06 20:54:43 +0000