| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Block layer integrity configuration is a bit complex right now, as it
indirects through operation vectors for a simple two-dimensional
configuration:
a) the checksum type of none, ip checksum, crc, crc64
b) the presence or absence of a reference tag
Remove the integrity profile, and instead add a separate csum_type flag
which replaces the existing ip-checksum field and a new flag that
indicates the presence of the reference tag.
This removes up to two layers of indirect calls, remove the need to
offload the no-op verification of non-PI metadata to a workqueue and
generally simplifies the code. The downside is that block/t10-pi.c now
has to be built into the kernel when CONFIG_BLK_DEV_INTEGRITY is
supported. Given that both nvme and SCSI require t10-pi.ko, it is loaded
for all usual configurations that enabled CONFIG_BLK_DEV_INTEGRITY
already, though.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240613084839.1044015-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
A few drivers optimistically try to support discard, write zeroes and
secure erase and disable the features from the I/O completion handler
if the hardware can't support them. This disable can't be done using
the atomic queue limits API because the I/O completion handlers can't
take sleeping locks or freeze the queue. Keep the existing clearing
of the relevant field to zero, but replace the old blk_queue_max_*
APIs with new disable APIs that force the value to 0.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Nitesh Shetty <nj.shetty@samsung.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240531074837.1648501-15-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Assign all queue limits through a local queue_limits variable and
queue_limits_commit_update so that we can't race updating them from
multiple places, and free the queue when updating them so that
in-progress I/O submissions don't see half-updated limits.
Also use the chance to clean up variable names to standard ones.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240531074837.1648501-13-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Assign all queue limits through a local queue_limits variable and
queue_limits_commit_update so that we can't race updating them from
multiple places, and freeze the queue when updating them so that
in-progress I/O submissions don't see half-updated limits.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240531074837.1648501-12-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Consolidate setting zone-related queue limits in sd_zbc_read_zones
instead of splitting them between sd_zbc_revalidate_zones and
sd_zbc_read_zones, and move the early_zone_information initialization
in sd_zbc_read_zones above setting up the queue limits.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240531074837.1648501-11-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Split the logic to pick the right discard mode into a little helper
to prepare for further changes.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240531074837.1648501-10-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Fall through to the main call to blk_queue_max_discard_sectors given that
max_blocks has been initialized to zero above instead of duplicating the
call.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240531074837.1648501-9-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add helper to disable WRITE SAME when it is not supported and use it
instead of sd_config_write_same in the I/O completion handler. This
avoids touching more fields than required in the I/O completion handler
and prepares for converting sd to use the atomic queue limits API.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240531074837.1648501-8-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add helper to disable discard when it is not supported and use it
instead of sd_config_discard in the I/O completion handler. This avoids
touching more fields than required in the I/O completion handler and
prepares for converting sd to use the atomic queue limits API.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240531074837.1648501-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Don't reset the discard settings to no-op over and over when a user
writes to the provisioning attribute as that is already the default
mode for ZBC devices. In hindsight we should have made writing to
the attribute fail for ZBC devices, but the code has probably been
around for far too long to change this now.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240531074837.1648501-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The soft max_sectors limit is normally capped by the hardware limits and
an arbitrary upper limit enforced by the kernel, but can be modified by
the user. A few drivers want to increase this limit (nbd, rbd) or
adjust it up or down based on hardware capabilities (sd).
Change blk_validate_limits to default max_sectors to the optimal I/O
size, or upgrade it to the preferred minimal I/O size if that is
larger than the kernel default if no optimal I/O size is provided based
on the logic in the SD driver.
This keeps the existing kernel default for drivers that do not provide
an io_opt or very big io_min value, but picks a much more useful
default for those who provide these hints, and allows to remove the
hacks to set the user max_sectors limit in nbd, rbd and sd.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Acked-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240531074837.1648501-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Prepare for skipping the IO Advice Hints Grouping mode page for USB storage
devices.
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Joao Machado <jocrismachado@gmail.com>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Christian Heusel <christian@heusel.eu>
Cc: stable@vger.kernel.org
Fixes: 4f53138fffc2 ("scsi: sd: Translate data lifetime information")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240613211828.2077477-2-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The comment that scsi_static_device_list would go away was added more than
18 years ago. Today, that list is still there and a large number of
additional entries have been added. This shows that this comment is
incorrect. Hence fix that comment.
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Avri Altman <Avri.Altman@wdc.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240612171522.2677600-1-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The function mpi3mr_qcmd() of the mpi3mr driver is able to indicate to
the HBA if a read or write command directed at an ATA device should be
translated to an NCQ read/write command with the high prioiryt bit set
when the request uses the RT priority class and the user has enabled NCQ
priority through sysfs.
However, unlike the mpt3sas driver, the mpi3mr driver does not define
the sas_ncq_prio_supported and sas_ncq_prio_enable sysfs attributes, so
the ncq_prio_enable field of struct mpi3mr_sdev_priv_data is never
actually set and NCQ Priority cannot ever be used.
Fix this by defining these missing atributes to allow a user to check if
an ATA device supports NCQ priority and to enable/disable the use of NCQ
priority. To do this, lift the function scsih_ncq_prio_supp() out of the
mpt3sas driver and make it the generic SCSI SAS transport function
sas_ata_ncq_prio_supported(). Nothing in that function is hardware
specific, so this function can be used in both the mpt3sas driver and
the mpi3mr driver.
Reported-by: Scott McCoy <scott.mccoy@wdc.com>
Fixes: 023ab2a9b4ed ("scsi: mpi3mr: Add support for queue command processing")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20240611083435.92961-1-dlemoal@kernel.org
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
On x86, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/scsi/scsi_common.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/scsi/advansys.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/scsi/BusLogic.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/scsi/aha1740.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/scsi/isci/isci.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/scsi/elx/efct.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/scsi/atp870u.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/scsi/ppa.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/scsi/imm.o
Add all missing invocations of the MODULE_DESCRIPTION() macro.
This updates all files which have a MODULE_LICENSE() but which do not have
a MODULE_DESCRIPTION(), even ones which did not produce the x86
allmodconfig warnings.
Acked-by: Finn Thain <fthain@linux-m68k.org>
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20240610-md-drivers-scsi-v3-1-055da78d66b2@quicinc.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
For SCSI devices supporting the Command Duration Limits feature set, the
user can enable/disable this feature use through the sysfs device attribute
"cdl_enable". This attribute modification triggers a call to
scsi_cdl_enable() to enable and disable the feature for ATA devices and set
the scsi device cdl_enable field to the user provided bool value. For SCSI
devices supporting CDL, the feature set is always enabled and
scsi_cdl_enable() is reduced to setting the cdl_enable field.
However, for ATA devices, a drive may spin-up with the CDL feature enabled
by default. But the SCSI device cdl_enable field is always initialized to
false (CDL disabled), regardless of the actual device CDL feature
state. For ATA devices managed by libata (or libsas), libata-core always
disables the CDL feature set when the device is attached, thus syncing the
state of the CDL feature on the device and of the SCSI device cdl_enable
field. However, for ATA devices connected to a SAS HBA, the CDL feature is
not disabled on scan for ATA devices that have this feature enabled by
default, leading to an inconsistent state of the feature on the device with
the SCSI device cdl_enable field.
Avoid this inconsistency by adding a call to scsi_cdl_enable() in
scsi_cdl_check() to make sure that the device-side state of the CDL feature
set always matches the scsi device cdl_enable field state. This implies
that CDL will always be disabled for ATA devices connected to SAS HBAs,
which is consistent with libata/libsas initialization of the device.
Reported-by: Scott McCoy <scott.mccoy@wdc.com>
Fixes: 1b22cfb14142 ("scsi: core: Allow enabling and disabling command duration limits")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20240607012507.111488-1-dlemoal@kernel.org
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Igor Pylypiv <ipylypiv@google.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"The core change is to detect unusually large number of VPD pages
(caused by device manufacturers having an endiannes issue) and reject
them rather than trying to parse a huge non-existent array.
The remaining fixes are in drivers the most user visible of which is
the ALUA state transition recognition (leads to intermittent I/O
errors in some situations otherwise)"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: mcq: Fix error output and clean up ufshcd_mcq_abort()
scsi: core: Handle devices which return an unusually large VPD page count
scsi: mpt3sas: Add missing kerneldoc parameter descriptions
scsi: qedf: Set qed_slowpath_params to zero before use
scsi: qedf: Wait for stag work during unload
scsi: qedf: Don't process stag work during unload and recovery
scsi: sr: Fix unintentional arithmetic wraparound
scsi: core: alua: I/O errors for ALUA state transitions
scsi: mpi3mr: Use proper format specifier in mpi3mr_sas_port_add()
|
|
There is a potential out-of-bounds access when using test_bit() on a single
word. The test_bit() and set_bit() functions operate on long values, and
when testing or setting a single word, they can exceed the word
boundary. KASAN detects this issue and produces a dump:
BUG: KASAN: slab-out-of-bounds in _scsih_add_device.constprop.0 (./arch/x86/include/asm/bitops.h:60 ./include/asm-generic/bitops/instrumented-atomic.h:29 drivers/scsi/mpt3sas/mpt3sas_scsih.c:7331) mpt3sas
Write of size 8 at addr ffff8881d26e3c60 by task kworker/u1536:2/2965
For full log, please look at [1].
Make the allocation at least the size of sizeof(unsigned long) so that
set_bit() and test_bit() have sufficient room for read/write operations
without overwriting unallocated memory.
[1] Link: https://lore.kernel.org/all/ZkNcALr3W3KGYYJG@gmail.com/
Fixes: c696f7b83ede ("scsi: mpt3sas: Implement device_remove_in_progress check in IOCTL path")
Cc: stable@vger.kernel.org
Suggested-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://lore.kernel.org/r/20240605085530.499432-1-leitao@debian.org
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Commit 321da3dc1f3c ("scsi: sd: usb_storage: uas: Access media prior
to querying device properties") triggered a read to LBA 0 before
attempting to inquire about device characteristics. This was done
because some protocol bridge devices will return generic values until
an attached storage device's media has been accessed.
Pierre Tomon reported that this change caused problems on a large
capacity external drive connected via a bridge device. The bridge in
question does not appear to implement the READ(10) command.
Issue a READ(16) instead of READ(10) when a device has been identified
as preferring 16-byte commands (use_16_for_rw heuristic).
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218890
Link: https://lore.kernel.org/r/70dd7ae0-b6b1-48e1-bb59-53b7c7f18274@rowland.harvard.edu
Link: https://lore.kernel.org/r/20240605022521.3960956-1-martin.petersen@oracle.com
Fixes: 321da3dc1f3c ("scsi: sd: usb_storage: uas: Access media prior to querying device properties")
Cc: stable@vger.kernel.org
Reported-by: Pierre Tomon <pierretom+12@ik.me>
Suggested-by: Alan Stern <stern@rowland.harvard.edu>
Tested-by: Pierre Tomon <pierretom+12@ik.me>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Bart Van Assche <bvanassche@acm.org> says:
Hi Martin,
There are several 32-bit ARM SCSI drivers that trigger compiler warnings
about missing function declarations. This patch series fixes these
compiler warnings by declaring local functions static. Please consider
this patch series for the next merge window.
Thanks,
Bart.
Link: https://lore.kernel.org/r/20240603172311.1587589-1-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240603172311.1587589-5-bvanassche@acm.org
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240603172311.1587589-4-bvanassche@acm.org
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240603172311.1587589-3-bvanassche@acm.org
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240603172311.1587589-2-bvanassche@acm.org
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening fixes from Kees Cook:
- scsi: mpt3sas: Avoid possible run-time warning with long manufacturer
strings
- mailmap: update entry for Kees Cook
- kunit/fortify: Remove __kmalloc_node() test
* tag 'hardening-v6.10-rc2-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
kunit/fortify: Remove __kmalloc_node() test
mailmap: update entry for Kees Cook
scsi: mpt3sas: Avoid possible run-time warning with long manufacturer strings
|
|
The prior strscpy() replacement of strncpy() here expected the
manufacture_reply strings to be NUL-terminated, but it is possible
they are not, as the code pattern here shows, e.g., edev->vendor_id
being exactly 1 character larger than manufacture_reply->vendor_id,
and the replaced strncpy() was copying only up to the size of the
source character array. Replace this with memtostr(), which is the
unambiguous way to convert a maybe not-NUL-terminated character array
into a NUL-terminated string.
Fixes: b7e9712a02e8 ("scsi: mpt3sas: Replace deprecated strncpy() with strscpy()")
Signed-off-by: Kees Cook <keescook@chromium.org>
Tested-by: Marco Patalano <mpatalan@redhat.com>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240410023155.2100422-3-keescook@chromium.org
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
'scsi_dif_tuple' is unused since commit 8cb2049c7448 ("[SCSI] qla2xxx: T10
DIF - Handle uninitalized sectors.").
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://lore.kernel.org/r/20240528215640.91771-1-linux@treblig.org
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
When calling scsi_alloc_sdev() -> blk_mq_alloc_queue(), we don't pass
the sdev as the queuedata, but rather manually set it afterwards. Just
pass to blk_mq_alloc_queue() to have automatically set.
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20240524084829.2132555-2-john.g.garry@oracle.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Tested-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Pull in remaining commits from 6.10/scsi-queue.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
sd can set a max_sectors value that is lower than the max_hw_sectors
limit based on the block limits VPD page. While this is rather unusual,
it used to work until the max_user_sectors field was split out to cleanly
deal with conflicting hardware and user limits when the hardware limit
changes. Also set max_user_sectors to ensure the limit can properly be
stacked.
Fixes: 4f563a64732d ("block: add a max_user_discard_sectors queue limit")
Reported-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Mike Snitzer <snitzer@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240523182618.602003-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Peter Schneider reported that a system would no longer boot after
updating to 6.8.4. Peter bisected the issue and identified commit
b5fc07a5fb56 ("scsi: core: Consult supported VPD page list prior to
fetching page") as being the culprit.
Turns out the enclosure device in Peter's system reports a byteswapped
page length for VPD page 0. It reports "02 00" as page length instead
of "00 02". This causes us to attempt to access 516 bytes (page length
+ header) of information despite only 2 pages being present.
Limit the page search scope to the size of our VPD buffer to guard
against devices returning a larger page count than requested.
Link: https://lore.kernel.org/r/20240521023040.2703884-1-martin.petersen@oracle.com
Fixes: b5fc07a5fb56 ("scsi: core: Consult supported VPD page list prior to fetching page")
Cc: stable@vger.kernel.org
Reported-by: Peter Schneider <pschneider1968@googlemail.com>
Closes: https://lore.kernel.org/all/eec6ebbf-061b-4a7b-96dc-ea748aa4d035@googlemail.com/
Tested-by: Peter Schneider <pschneider1968@googlemail.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Pull virtio updates from Michael Tsirkin:
"Several new features here:
- virtio-net is finally supported in vduse
- virtio (balloon and mem) interaction with suspend is improved
- vhost-scsi now handles signals better/faster
And fixes, cleanups all over the place"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (48 commits)
virtio-pci: Check if is_avq is NULL
virtio: delete vq in vp_find_vqs_msix() when request_irq() fails
MAINTAINERS: add Eugenio Pérez as reviewer
vhost-vdpa: Remove usage of the deprecated ida_simple_xx() API
vp_vdpa: don't allocate unused msix vectors
sound: virtio: drop owner assignment
fuse: virtio: drop owner assignment
scsi: virtio: drop owner assignment
rpmsg: virtio: drop owner assignment
nvdimm: virtio_pmem: drop owner assignment
wifi: mac80211_hwsim: drop owner assignment
vsock/virtio: drop owner assignment
net: 9p: virtio: drop owner assignment
net: virtio: drop owner assignment
net: caif: virtio: drop owner assignment
misc: nsm: drop owner assignment
iommu: virtio: drop owner assignment
drm/virtio: drop owner assignment
gpio: virtio: drop owner assignment
firmware: arm_scmi: virtio: drop owner assignment
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the small set of driver core and kernfs changes for 6.10-rc1.
Nothing major here at all, just a small set of changes for some driver
core apis, and minor fixups. Included in here are:
- sysfs_bin_attr_simple_read() helper added and used
- device_show_string() helper added and used
All usages of these were acked by the various maintainers. Also in
here are:
- kernfs minor cleanup
- removed unused functions
- typo fix in documentation
- pay attention to sysfs_create_link() failures in module.c finally
All of these have been in linux-next for a very long time with no
reported problems"
* tag 'driver-core-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
device property: Fix a typo in the description of device_get_child_node_count()
kernfs: mount: Remove unnecessary ‘NULL’ values from knparent
scsi: Use device_show_string() helper for sysfs attributes
platform/x86: Use device_show_string() helper for sysfs attributes
perf: Use device_show_string() helper for sysfs attributes
IB/qib: Use device_show_string() helper for sysfs attributes
hwmon: Use device_show_string() helper for sysfs attributes
driver core: Add device_show_string() helper for sysfs attributes
treewide: Use sysfs_bin_attr_simple_read() helper
sysfs: Add sysfs_bin_attr_simple_read() helper
module: don't ignore sysfs_create_link() failures
driver core: Remove unused platform_notify, platform_notify_remove
|
|
virtio core already sets the .owner, so driver does not need to.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Message-Id: <20240331-module-owner-virtio-v2-23-98f04bfaf46a@linaro.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Skip E820 checks for MCFG ECAM regions for new (2016+) machines,
since there's no requirement to describe them in E820 and some
platforms require ECAM to work (Bjorn Helgaas)
- Rename PCI_IRQ_LEGACY to PCI_IRQ_INTX to be more specific (Damien
Le Moal)
- Remove last user and pci_enable_device_io() (Heiner Kallweit)
- Wait for Link Training==0 to avoid possible race (Ilpo Järvinen)
- Skip waiting for devices that have been disconnected while
suspended (Ilpo Järvinen)
- Clear Secondary Status errors after enumeration since Master Aborts
and Unsupported Request errors are an expected part of enumeration
(Vidya Sagar)
MSI:
- Remove unused IMS (Interrupt Message Store) support (Bjorn Helgaas)
Error handling:
- Mask Genesys GL975x SD host controller Replay Timer Timeout
correctable errors caused by a hardware defect; the errors cause
interrupts that prevent system suspend (Kai-Heng Feng)
- Fix EDR-related _DSM support, which previously evaluated revision 5
but assumed revision 6 behavior (Kuppuswamy Sathyanarayanan)
ASPM:
- Simplify link state definitions and mask calculation (Ilpo
Järvinen)
Power management:
- Avoid D3cold for HP Pavilion 17 PC/1972 PCIe Ports, where BIOS
apparently doesn't know how to put them back in D0 (Mario
Limonciello)
CXL:
- Support resetting CXL devices; special handling required because
CXL Ports mask Secondary Bus Reset by default (Dave Jiang)
DOE:
- Support DOE Discovery Version 2 (Alexey Kardashevskiy)
Endpoint framework:
- Set endpoint BAR to be 64-bit if the driver says that's all the
device supports, in addition to doing so if the size is >2GB
(Niklas Cassel)
- Simplify endpoint BAR allocation and setting interfaces (Niklas
Cassel)
Cadence PCIe controller driver:
- Drop DT binding redundant msi-parent and pci-bus.yaml (Krzysztof
Kozlowski)
Cadence PCIe endpoint driver:
- Configure endpoint BARs to be 64-bit based on the BAR type, not the
BAR value (Niklas Cassel)
Freescale Layerscape PCIe controller driver:
- Convert DT binding to YAML (Frank Li)
MediaTek MT7621 PCIe controller driver:
- Add DT binding missing 'reg' property for child Root Ports
(Krzysztof Kozlowski)
- Fix theoretical string truncation in PHY name (Sergio Paracuellos)
NVIDIA Tegra194 PCIe controller driver:
- Return success for endpoint probe instead of falling through to the
failure path (Vidya Sagar)
Renesas R-Car PCIe controller driver:
- Add DT binding missing IOMMU properties (Geert Uytterhoeven)
- Add DT binding R-Car V4H compatible for host and endpoint mode
(Yoshihiro Shimoda)
Rockchip PCIe controller driver:
- Configure endpoint BARs to be 64-bit based on the BAR type, not the
BAR value (Niklas Cassel)
- Add DT binding missing maxItems to ep-gpios (Krzysztof Kozlowski)
- Set the Subsystem Vendor ID, which was previously zero because it
was masked incorrectly (Rick Wertenbroek)
Synopsys DesignWare PCIe controller driver:
- Restructure DBI register access to accommodate devices where this
requires Refclk to be active (Manivannan Sadhasivam)
- Remove the deinit() callback, which was only need by the
pcie-rcar-gen4, and do it directly in that driver (Manivannan
Sadhasivam)
- Add dw_pcie_ep_cleanup() so drivers that support PERST# can clean
up things like eDMA (Manivannan Sadhasivam)
- Rename dw_pcie_ep_exit() to dw_pcie_ep_deinit() to make it parallel
to dw_pcie_ep_init() (Manivannan Sadhasivam)
- Rename dw_pcie_ep_init_complete() to dw_pcie_ep_init_registers() to
reflect the actual functionality (Manivannan Sadhasivam)
- Call dw_pcie_ep_init_registers() directly from all the glue
drivers, not just those that require active Refclk from the host
(Manivannan Sadhasivam)
- Remove the "core_init_notifier" flag, which was an obscure way for
glue drivers to indicate that they depend on Refclk from the host
(Manivannan Sadhasivam)
TI J721E PCIe driver:
- Add DT binding J784S4 SoC Device ID (Siddharth Vadapalli)
- Add DT binding J722S SoC support (Siddharth Vadapalli)
TI Keystone PCIe controller driver:
- Add DT binding missing num-viewport, phys and phy-name properties
(Jan Kiszka)
Miscellaneous:
- Constify and annotate with __ro_after_init (Heiner Kallweit)
- Convert DT bindings to YAML (Krzysztof Kozlowski)
- Check for kcalloc() failure in of_pci_prop_intr_map() (Duoming
Zhou)"
* tag 'pci-v6.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (97 commits)
PCI: Do not wait for disconnected devices when resuming
x86/pci: Skip early E820 check for ECAM region
PCI: Remove unused pci_enable_device_io()
ata: pata_cs5520: Remove unnecessary call to pci_enable_device_io()
PCI: Update pci_find_capability() stub return types
PCI: Remove PCI_IRQ_LEGACY
scsi: vmw_pvscsi: Do not use PCI_IRQ_LEGACY instead of PCI_IRQ_LEGACY
scsi: pmcraid: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
scsi: mpt3sas: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
scsi: megaraid_sas: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
scsi: ipr: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
scsi: hpsa: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
scsi: arcmsr: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
wifi: rtw89: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
dt-bindings: PCI: rockchip,rk3399-pcie: Add missing maxItems to ep-gpios
Revert "genirq/msi: Provide constants for PCI/IMS support"
Revert "x86/apic/msi: Enable PCI/IMS"
Revert "iommu/vt-d: Enable PCI/IMS"
Revert "iommu/amd: Enable PCI/IMS"
Revert "PCI/MSI: Provide IMS (Interrupt Message Store) support"
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull bdev bd_inode updates from Al Viro:
"Replacement of bdev->bd_inode with sane(r) set of primitives by me and
Yu Kuai"
* tag 'pull-bd_inode-1' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
RIP ->bd_inode
dasd_format(): killing the last remaining user of ->bd_inode
nilfs_attach_log_writer(): use ->bd_mapping->host instead of ->bd_inode
block/bdev.c: use the knowledge of inode/bdev coallocation
gfs2: more obvious initializations of mapping->host
fs/buffer.c: massage the remaining users of ->bd_inode to ->bd_mapping
blk_ioctl_{discard,zeroout}(): we only want ->bd_inode->i_mapping here...
grow_dev_folio(): we only want ->bd_inode->i_mapping there
use ->bd_mapping instead of ->bd_inode->i_mapping
block_device: add a pointer to struct address_space (page cache of bdev)
missing helpers: bdev_unhash(), bdev_drop()
block: move two helpers into bdev.c
block2mtd: prevent direct access of bd_inode
dm-vdo: use bdev_nr_bytes(bdev) instead of i_size_read(bdev->bd_inode)
blkdev_write_iter(): saner way to get inode and bdev
bcachefs: remove dead function bdev_sectors()
ext4: remove block_device_ejected()
erofs_buf: store address_space instead of inode
erofs: switch erofs_bread() to passing offset instead of block number
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull mm updates from Andrew Morton:
"The usual shower of singleton fixes and minor series all over MM,
documented (hopefully adequately) in the respective changelogs.
Notable series include:
- Lucas Stach has provided some page-mapping cleanup/consolidation/
maintainability work in the series "mm/treewide: Remove pXd_huge()
API".
- In the series "Allow migrate on protnone reference with
MPOL_PREFERRED_MANY policy", Donet Tom has optimized mempolicy's
MPOL_PREFERRED_MANY mode, yielding almost doubled performance in
one test.
- In their series "Memory allocation profiling" Kent Overstreet and
Suren Baghdasaryan have contributed a means of determining (via
/proc/allocinfo) whereabouts in the kernel memory is being
allocated: number of calls and amount of memory.
- Matthew Wilcox has provided the series "Various significant MM
patches" which does a number of rather unrelated things, but in
largely similar code sites.
- In his series "mm: page_alloc: freelist migratetype hygiene"
Johannes Weiner has fixed the page allocator's handling of
migratetype requests, with resulting improvements in compaction
efficiency.
- In the series "make the hugetlb migration strategy consistent"
Baolin Wang has fixed a hugetlb migration issue, which should
improve hugetlb allocation reliability.
- Liu Shixin has hit an I/O meltdown caused by readahead in a
memory-tight memcg. Addressed in the series "Fix I/O high when
memory almost met memcg limit".
- In the series "mm/filemap: optimize folio adding and splitting"
Kairui Song has optimized pagecache insertion, yielding ~10%
performance improvement in one test.
- Baoquan He has cleaned up and consolidated the early zone
initialization code in the series "mm/mm_init.c: refactor
free_area_init_core()".
- Baoquan has also redone some MM initializatio code in the series
"mm/init: minor clean up and improvement".
- MM helper cleanups from Christoph Hellwig in his series "remove
follow_pfn".
- More cleanups from Matthew Wilcox in the series "Various
page->flags cleanups".
- Vlastimil Babka has contributed maintainability improvements in the
series "memcg_kmem hooks refactoring".
- More folio conversions and cleanups in Matthew Wilcox's series:
"Convert huge_zero_page to huge_zero_folio"
"khugepaged folio conversions"
"Remove page_idle and page_young wrappers"
"Use folio APIs in procfs"
"Clean up __folio_put()"
"Some cleanups for memory-failure"
"Remove page_mapping()"
"More folio compat code removal"
- David Hildenbrand chipped in with "fs/proc/task_mmu: convert
hugetlb functions to work on folis".
- Code consolidation and cleanup work related to GUP's handling of
hugetlbs in Peter Xu's series "mm/gup: Unify hugetlb, part 2".
- Rick Edgecombe has developed some fixes to stack guard gaps in the
series "Cover a guard gap corner case".
- Jinjiang Tu has fixed KSM's behaviour after a fork+exec in the
series "mm/ksm: fix ksm exec support for prctl".
- Baolin Wang has implemented NUMA balancing for multi-size THPs.
This is a simple first-cut implementation for now. The series is
"support multi-size THP numa balancing".
- Cleanups to vma handling helper functions from Matthew Wilcox in
the series "Unify vma_address and vma_pgoff_address".
- Some selftests maintenance work from Dev Jain in the series
"selftests/mm: mremap_test: Optimizations and style fixes".
- Improvements to the swapping of multi-size THPs from Ryan Roberts
in the series "Swap-out mTHP without splitting".
- Kefeng Wang has significantly optimized the handling of arm64's
permission page faults in the series
"arch/mm/fault: accelerate pagefault when badaccess"
"mm: remove arch's private VM_FAULT_BADMAP/BADACCESS"
- GUP cleanups from David Hildenbrand in "mm/gup: consistently call
it GUP-fast".
- hugetlb fault code cleanups from Vishal Moola in "Hugetlb fault
path to use struct vm_fault".
- selftests build fixes from John Hubbard in the series "Fix
selftests/mm build without requiring "make headers"".
- Memory tiering fixes/improvements from Ho-Ren (Jack) Chuang in the
series "Improved Memory Tier Creation for CPUless NUMA Nodes".
Fixes the initialization code so that migration between different
memory types works as intended.
- David Hildenbrand has improved follow_pte() and fixed an errant
driver in the series "mm: follow_pte() improvements and acrn
follow_pte() fixes".
- David also did some cleanup work on large folio mapcounts in his
series "mm: mapcount for large folios + page_mapcount() cleanups".
- Folio conversions in KSM in Alex Shi's series "transfer page to
folio in KSM".
- Barry Song has added some sysfs stats for monitoring multi-size
THP's in the series "mm: add per-order mTHP alloc and swpout
counters".
- Some zswap cleanups from Yosry Ahmed in the series "zswap
same-filled and limit checking cleanups".
- Matthew Wilcox has been looking at buffer_head code and found the
documentation to be lacking. The series is "Improve buffer head
documentation".
- Multi-size THPs get more work, this time from Lance Yang. His
series "mm/madvise: enhance lazyfreeing with mTHP in madvise_free"
optimizes the freeing of these things.
- Kemeng Shi has added more userspace-visible writeback
instrumentation in the series "Improve visibility of writeback".
- Kemeng Shi then sent some maintenance work on top in the series
"Fix and cleanups to page-writeback".
- Matthew Wilcox reduces mmap_lock traffic in the anon vma code in
the series "Improve anon_vma scalability for anon VMAs". Intel's
test bot reported an improbable 3x improvement in one test.
- SeongJae Park adds some DAMON feature work in the series
"mm/damon: add a DAMOS filter type for page granularity access recheck"
"selftests/damon: add DAMOS quota goal test"
- Also some maintenance work in the series
"mm/damon/paddr: simplify page level access re-check for pageout"
"mm/damon: misc fixes and improvements"
- David Hildenbrand has disabled some known-to-fail selftests ni the
series "selftests: mm: cow: flag vmsplice() hugetlb tests as
XFAIL".
- memcg metadata storage optimizations from Shakeel Butt in "memcg:
reduce memory consumption by memcg stats".
- DAX fixes and maintenance work from Vishal Verma in the series
"dax/bus.c: Fixups for dax-bus locking""
* tag 'mm-stable-2024-05-17-19-19' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (426 commits)
memcg, oom: cleanup unused memcg_oom_gfp_mask and memcg_oom_order
selftests/mm: hugetlb_madv_vs_map: avoid test skipping by querying hugepage size at runtime
mm/hugetlb: add missing VM_FAULT_SET_HINDEX in hugetlb_wp
mm/hugetlb: add missing VM_FAULT_SET_HINDEX in hugetlb_fault
selftests: cgroup: add tests to verify the zswap writeback path
mm: memcg: make alloc_mem_cgroup_per_node_info() return bool
mm/damon/core: fix return value from damos_wmark_metric_value
mm: do not update memcg stats for NR_{FILE/SHMEM}_PMDMAPPED
selftests: cgroup: remove redundant enabling of memory controller
Docs/mm/damon/maintainer-profile: allow posting patches based on damon/next tree
Docs/mm/damon/maintainer-profile: change the maintainer's timezone from PST to PT
Docs/mm/damon/design: use a list for supported filters
Docs/admin-guide/mm/damon/usage: fix wrong schemes effective quota update command
Docs/admin-guide/mm/damon/usage: fix wrong example of DAMOS filter matching sysfs file
selftests/damon: classify tests for functionalities and regressions
selftests/damon/_damon_sysfs: use 'is' instead of '==' for 'None'
selftests/damon/_damon_sysfs: find sysfs mount point from /proc/mounts
selftests/damon/_damon_sysfs: check errors from nr_schemes file reads
mm/damon/core: initialize ->esz_bp from damos_quota_init_priv()
selftests/damon: add a test for DAMOS quota goal
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Avoid 'constexpr', which is a keyword in C23
- Allow 'dtbs_check' and 'dt_compatible_check' run independently of
'dt_binding_check'
- Fix weak references to avoid GOT entries in position-independent code
generation
- Convert the last use of 'optional' property in arch/sh/Kconfig
- Remove support for the 'optional' property in Kconfig
- Remove support for Clang's ThinLTO caching, which does not work with
the .incbin directive
- Change the semantics of $(src) so it always points to the source
directory, which fixes Makefile inconsistencies between upstream and
downstream
- Fix 'make tar-pkg' for RISC-V to produce a consistent package
- Provide reasonable default coverage for objtool, sanitizers, and
profilers
- Remove redundant OBJECT_FILES_NON_STANDARD, KASAN_SANITIZE, etc.
- Remove the last use of tristate choice in drivers/rapidio/Kconfig
- Various cleanups and fixes in Kconfig
* tag 'kbuild-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (46 commits)
kconfig: use sym_get_ |
