| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
[ Upstream commit 9dcf111dd3e7ed5fce82bb108e3a3fc001c07225 ]
The qla4xxx_get_ep_fwdb() function is supposed to return NULL on error,
but qla4xxx_ep_connect() returns error pointers. Propagating the error
pointers will lead to an Oops in the caller, so change the error pointers
to NULL.
Fixes: 13483730a13b ("[SCSI] qla4xxx: fix flash/ddb support")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/aJwnVKS9tHsw1tEu@stanley.mountain
Reviewed-by: Chris Leech <cleech@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c91e140c82eb58724c435f623702e51cc7896646 ]
On 32-bit systems, 64-bit BAR writes to admin queue registers are
performed as two 32-bit writes. Without locking, this can cause partial
writes when accessed concurrently.
Updated per-queue spinlocks is used to serialize these writes and prevent
race conditions.
Fixes: 824a156633df ("scsi: mpi3mr: Base driver code")
Cc: stable@vger.kernel.org
Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Link: https://lore.kernel.org/r/20250627194539.48851-4-ranjan.kumar@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 6853885b21cb1d7157cc14c9d30cc17141565bae ]
The volatile qualifier is redundant for __iomem pointers.
Cleaned up usage in mpi3mr_writeq() and sysif_regs pointer as per
Upstream compliance.
Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Link: https://lore.kernel.org/r/20250627194539.48851-3-ranjan.kumar@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Stable-dep-of: c91e140c82eb ("scsi: mpi3mr: Serialize admin queue BAR writes on 32-bit systems")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8604f633f59375687fa115d6f691de95a42520e3 upstream.
scsi_check_passthrough() is always called, but it doesn't check for if a
command completed successfully. As a result, if a command was successful and
the caller used SCMD_FAILURE_RESULT_ANY to indicate what failures it wanted
to retry, we will end up retrying the command. This will cause delays during
device discovery because of the command being sent multiple times. For some
USB devices it can also cause the wrong device size to be used.
This patch adds a check for if the command was successful. If it is we
return immediately instead of trying to match a failure.
Fixes: 994724e6b3f0 ("scsi: core: Allow passthrough to request midlayer retries")
Reported-by: Kris Karas <bugs-a21@moonlit-rail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219652
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Link: https://lore.kernel.org/r/20250107010220.7215-1-michael.christie@oracle.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Igor Pylypiv <ipylypiv@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e6327c4acf925bb6d6d387d76fc3bd94471e10d8 upstream.
The "is_waiting" flag was updated after calling complete(), which could
lead to a race where the waiting thread wakes up before the flag is
cleared. This may cause a missed wakeup or stale state check.
Reorder the operations to update "is_waiting" before signaling completion
to ensure consistent state.
Fixes: 824a156633df ("scsi: mpi3mr: Base driver code")
Cc: stable@vger.kernel.org
Co-developed-by: Chandrakanth Patil <chandrakanth.patil@broadcom.com>
Signed-off-by: Chandrakanth Patil <chandrakanth.patil@broadcom.com>
Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Link: https://lore.kernel.org/r/20250627194539.48851-2-ranjan.kumar@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit eea6cafb5890db488fce1c69d05464214616d800 ]
Remove the redundant assignment if kzalloc() succeeds to avoid memory
leak.
Fixes: bd2cdd5e400f ("scsi: lpfc: NVME Initiator: Add debugfs support")
Signed-off-by: Jiasheng Jiang <jiashengjiangcool@gmail.com>
Link: https://lore.kernel.org/r/20250801185202.42631-1-jiashengjiangcool@gmail.com
Reviewed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit dafeaf2c03e71255438ffe5a341d94d180e6c88e ]
When PCI_IRQ_AFFINITY is set for calling pci_alloc_irq_vectors(), it
means interrupts are spread around the available CPUs. It also means that
the interrupts become managed, which means that an interrupt is shutdown
when all the CPUs in the interrupt affinity mask go offline.
Using managed interrupts in this way means that we should ensure that
completions should not occur on HW queues where the associated interrupt
is shutdown. This is typically achieved by ensuring only CPUs which are
online can generate IO completion traffic to the HW queue which they are
mapped to (so that they can also serve completion interrupts for that HW
queue).
The problem in the driver is that a CPU can generate completions to a HW
queue whose interrupt may be shutdown, as the CPUs in the HW queue
interrupt affinity mask may be offline. This can cause IOs to never
complete and hang the system. The driver maintains its own CPU <-> HW
queue mapping for submissions, see aac_fib_vector_assign(), but this does
not reflect the CPU <-> HW queue interrupt affinity mapping.
Commit 9dc704dcc09e ("scsi: aacraid: Reply queue mapping to CPUs based on
IRQ affinity") tried to remedy this issue may mapping CPUs properly to HW
queue interrupts. However this was later reverted in commit c5becf57dd56
("Revert "scsi: aacraid: Reply queue mapping to CPUs based on IRQ
affinity") - it seems that there were other reports of hangs. I guess
that this was due to some implementation issue in the original commit or
maybe a HW issue.
Fix the very original hang by just not using managed interrupts by not
setting PCI_IRQ_AFFINITY. In this way, all CPUs will be in each HW queue
affinity mask, so should not create completion problems if any CPUs go
offline.
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20250715111535.499853-1-john.g.garry@oracle.com
Closes: https://lore.kernel.org/linux-scsi/20250618192427.3845724-1-jmeneghi@redhat.com/
Reviewed-by: John Meneghini <jmeneghi@redhat.com>
Tested-by: John Meneghini <jmeneghi@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 37c4e72b0651e7697eb338cd1fb09feef472cc1a ]
sas_user_scan() did not fully process wildcard channel scans
(SCAN_WILD_CARD) when a transport-specific user_scan() callback was
present. Only channel 0 would be scanned via user_scan(), while the
remaining channels were skipped, potentially missing devices.
user_scan() invokes updated sas_user_scan() for channel 0, and if
successful, iteratively scans remaining channels (1 to
shost->max_channel) via scsi_scan_host_selected(). This ensures complete
wildcard scanning without affecting transport-specific scanning behavior.
Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Link: https://lore.kernel.org/r/20250624061649.17990-1-ranjan.kumar@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 04caad5a7ba86e830d04750417a15bad8ac2613c ]
With the ATA error model, an NCQ command failure always triggers an abort
(termination) of all NCQ commands queued on the device. In such case, the
SAT or the host must handle the failed command according to the command
sense data and immediately retry all other NCQ commands that were aborted
due to the failed NCQ command.
For SAS HBAs controlled by the mpi3mr driver, NCQ command aborts are not
handled by the HBA SAT and sent back to the host, with an ioc log
information equal to 0x31080000 (IOC_LOGINFO_PREFIX_PL with the PL code
PL_LOGINFO_CODE_SATA_NCQ_FAIL_ALL_CMDS_AFTR_ERR). The function
mpi3mr_process_op_reply_desc() always forces a retry of commands
terminated with the status MPI3_IOCSTATUS_SCSI_IOC_TERMINATED using the
SCSI result DID_SOFT_ERROR, regardless of the ioc_loginfo for the
command. This correctly forces the retry of collateral NCQ abort
commands, but with the retry counter for the command being incremented.
If a command to an ATA device is subject to too many retries due to other
NCQ commands failing (e.g. read commands trying to access unreadable
sectors), the collateral NCQ abort commands may be terminated with an
error as they run out of retries. This violates the SAT specification and
causes hard-to-debug command errors.
Solve this issue by modifying the handling of the
MPI3_IOCSTATUS_SCSI_IOC_TERMINATED status to check if a command is for an
ATA device and if the command ioc_loginfo indicates an NCQ collateral
abort. If that is the case, force the command retry using the SCSI result
DID_IMM_RETRY to avoid incrementing the command retry count.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20250606052747.742998-2-dlemoal@kernel.org
Tested-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 15592a11d5a5c8411ac8494ec49736b658f6fbff ]
With the ATA error model, an NCQ command failure always triggers an abort
(termination) of all NCQ commands queued on the device. In such case, the
SAT or the host must handle the failed command according to the command
sense data and immediately retry all other NCQ commands that were aborted
due to the failed NCQ command.
For SAS HBAs controlled by the mpt3sas driver, NCQ command aborts are not
handled by the HBA SAT and sent back to the host, with an ioc log
information equal to 0x31080000 (IOC_LOGINFO_PREFIX_PL with the PL code
PL_LOGINFO_CODE_SATA_NCQ_FAIL_ALL_CMDS_AFTR_ERR). The function
_scsih_io_done() always forces a retry of commands terminated with the
status MPI2_IOCSTATUS_SCSI_IOC_TERMINATED using the SCSI result
DID_SOFT_ERROR, regardless of the log_info for the command. This
correctly forces the retry of collateral NCQ abort commands, but with the
retry counter for the command being incremented. If a command to an ATA
device is subject to too many retries due to other NCQ commands failing
(e.g. read commands trying to access unreadable sectors), the collateral
NCQ abort commands may be terminated with an error as they run out of
retries. This violates the SAT specification and causes hard-to-debug
command errors.
Solve this issue by modifying the handling of the
MPI2_IOCSTATUS_SCSI_IOC_TERMINATED status to check if a command is for an
ATA device and if the command loginfo indicates an NCQ collateral
abort. If that is the case, force the command retry using the SCSI result
DID_IMM_RETRY to avoid incrementing the command retry count.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20250606052747.742998-3-dlemoal@kernel.org
Tested-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6698796282e828733cde3329c887b4ae9e5545e9 ]
If a call to lpfc_sli4_read_rev() from lpfc_sli4_hba_setup() fails, the
resultant cleanup routine lpfc_sli4_vport_delete_fcp_xri_aborted() may
occur before sli4_hba.hdwqs are allocated. This may result in a null
pointer dereference when attempting to take the abts_io_buf_list_lock for
the first hardware queue. Fix by adding a null ptr check on
phba->sli4_hba.hdwq and early return because this situation means there
must have been an error during port initialization.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20250618192138.124116-4-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1cced5779e7a3ff7ec025fc47c76a7bd3bb38877 ]
For SLI3, the HBA_SETUP flag is never set so the lpfc_dev_loss_tmo_callbk
always early returns. Add a phba->sli_rev check for SLI4 mode so that
the SLI3 path can flow through the original dev_loss_tmo worker thread
design to lpfc_dev_loss_tmo_handler instead of early return.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20250618192138.124116-9-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit add4c4850363d7c1b72e8fce9ccb21fdd2cf5dc9 ]
When the bfad_im_probe() function fails during initialization, the memory
pointed to by bfad->im is freed without setting bfad->im to NULL.
Subsequently, during driver uninstallation, when the state machine enters
the bfad_sm_stopping state and calls the bfad_im_probe_undo() function,
it attempts to free the memory pointed to by bfad->im again, thereby
triggering a double-free vulnerability.
Set bfad->im to NULL if probing fails.
Signed-off-by: jackysliu <1972843537@qq.com>
Link: https://lore.kernel.org/r/tencent_3BB950D6D2D470976F55FC879206DE0B9A09@qq.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3ea3a256ed81f95ab0f3281a0e234b01a9cae605 ]
In case of an ib_fast_reg_mr allocation failure during iSER setup, the
machine hits a panic because iscsi_conn->dd_data is initialized
unconditionally, even when no memory is allocated (dd_size == 0). This
leads invalid pointer dereference during connection teardown.
Fix by setting iscsi_conn->dd_data only if memory is actually allocated.
Panic trace:
------------
iser: iser_create_fastreg_desc: Failed to allocate ib_fast_reg_mr err=-12
iser: iser_alloc_rx_descriptors: failed allocating rx descriptors / data buffers
BUG: unable to handle page fault for address: fffffffffffffff8
RIP: 0010:swake_up_locked.part.5+0xa/0x40
Call Trace:
complete+0x31/0x40
iscsi_iser_conn_stop+0x88/0xb0 [ib_iser]
iscsi_stop_conn+0x66/0xc0 [scsi_transport_iscsi]
iscsi_if_stop_conn+0x14a/0x150 [scsi_transport_iscsi]
iscsi_if_rx+0x1135/0x1834 [scsi_transport_iscsi]
? netlink_lookup+0x12f/0x1b0
? netlink_deliver_tap+0x2c/0x200
netlink_unicast+0x1ab/0x280
netlink_sendmsg+0x257/0x4f0
? _copy_from_user+0x29/0x60
sock_sendmsg+0x5f/0x70
Signed-off-by: Showrya M N <showrya@chelsio.com>
Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com>
Link: https://lore.kernel.org/r/20250627112329.19763-1-showrya@chelsio.com
Reviewed-by: Chris Leech <cleech@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8e48727c26c4d839ff9b4b73d1cae486bea7fe19 ]
Commit aa3998dbeb3a ("ata: libata-scsi: Disable scsi device
manage_system_start_stop") enabled libata EH to manage device power mode
trasitions for system suspend/resume and removed the flag from
ata_scsi_dev_config. However, since the sd_shutdown() function still
relies on the manage_system_start_stop flag, a spin-down command is not
issued to the disk with command "echo 1 > /sys/block/sdb/device/delete"
sd_shutdown() can be called for both system/runtime start stop
operations, so utilize the manage_run_time_start_stop flag set in the
ata_scsi_dev_config and issue a spin-down command during disk removal
when the system is running. This is in addition to when the system is
powering off and manage_shutdown flag is set. The
manage_system_start_stop flag will still be used for drivers that still
set the flag.
Fixes: aa3998dbeb3a ("ata: libata-scsi: Disable scsi device manage_system_start_stop")
Signed-off-by: Salomon Dushimirimana <salomondush@google.com>
Link: https://lore.kernel.org/r/20250724214520.112927-1-salomondush@google.com
Tested-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7bdc68921481c19cd8c85ddf805a834211c19e61 ]
This reverts commit c577ab7ba5f3bf9062db8a58b6e89d4fe370447e.
The invocation of iscsi_put_conn() in iscsi_iter_destory_conn_fn() is
used to free the initial reference counter of iscsi_cls_conn. For
non-qla4xxx cases, the ->destroy_conn() callback (e.g.,
iscsi_conn_teardown) will call iscsi_remove_conn() and iscsi_put_conn()
to remove the connection from the children list of session and free the
connection at last. However for qla4xxx, it is not the case. The
->destroy_conn() callback of qla4xxx will keep the connection in the
session conn_list and doesn't use iscsi_put_conn() to free the initial
reference counter. Therefore, it seems necessary to keep the
iscsi_put_conn() in the iscsi_iter_destroy_conn_fn(), otherwise, there
will be memory leak problem.
Link: https://lore.kernel.org/all/88334658-072b-4b90-a949-9c74ef93cfd1@huawei.com/
Fixes: c577ab7ba5f3 ("scsi: iscsi: Fix HW conn removal use after free")
Signed-off-by: Li Lingfeng <lilingfeng3@huawei.com>
Link: https://lore.kernel.org/r/20250715073926.3529456-1-lilingfeng3@huawei.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3e90b38781e3bdd651edaf789585687611638862 ]
In _mpt3sas_fw_work() the fw_event reference is removed, it should also
be freed in all cases.
Fixes: 4318c7347847 ("scsi: mpt3sas: Handle NVMe PCIe device related events generated from firmware.")
Signed-off-by: Tomas Henzl <thenzl@redhat.com>
Link: https://lore.kernel.org/r/20250723153018.50518-1-thenzl@redhat.com
Acked-by: Sathya Prakash Veerichetty <sathya.prakash@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 063bec4444d54e5f35d11949c5c90eaa1ff84c11 ]
The dma_unmap_sg() functions should be called with the same nents as the
dma_map_sg(), not the value the map function returned.
Fixes: ddcc7e347a89 ("isci: fix dma_unmap_sg usage")
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Link: https://lore.kernel.org/r/20250627142451.241713-2-fourier.thomas@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0141618727bc929fe868153d21797f10ce5bef3f ]
The dma_unmap_sg() functions should be called with the same nents as the
dma_map_sg(), not the value the map function returned.
Fixes: b5762948263d ("[SCSI] mvsas: Add Marvell 6440 SAS/SATA driver")
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Link: https://lore.kernel.org/r/20250627134822.234813-2-fourier.thomas@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3a988d0b65d7d1713ce7596eae288a293f3b938e ]
The dma_unmap_sg() functions should be called with the same nents as the
dma_map_sg(), not the value the map function returned.
Fixes: 692e5d73a811 ("scsi: elx: efct: LIO backend interface routines")
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Link: https://lore.kernel.org/r/20250627114117.188480-2-fourier.thomas@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 023a293b9cd0bb86a9b50cd7688a3d9d266826db ]
The dma_unmap_sg() functions should be called with the same nents as the
dma_map_sg(), not the value the map function returned.
Fixes: 88a678bbc34c ("ibmvscsis: Initial commit of IBM VSCSI Tgt Driver")
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Link: https://lore.kernel.org/r/20250630111803.94389-2-fourier.thomas@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 040492ac2578b66d3ff4dcefb4f56811634de53d ]
Commit 32566a6f1ae5 ("scsi: lpfc: Remove NLP_RELEASE_RPI flag from nodelist
structure") introduced a regression with SLI-3 adapters (e.g. LPe12000 8Gb)
where a Link Down / Link Up such as caused by disabling an host FC switch
port would result in the devices remaining in the transport-offline state
and multipath reporting them as failed. This problem was not seen with
newer SLI-4 adapters.
The problem was caused by portions of the patch which removed the functions
__lpfc_sli_rpi_release() and lpfc_sli_rpi_release() and all their callers.
This was presumably because with the removal of the NLP_RELEASE_RPI flag
there was no need to free the rpi.
However, __lpfc_sli_rpi_release() and lpfc_sli_rpi_release() which calls it
reset the NLP_UNREG_INP flag. And, lpfc_sli_def_mbox_cmpl() has a path
where __lpfc_sli_rpi_release() was called in a particular case where
NLP_UNREG_INP was not otherwise cleared because of other conditions.
Restoring the else clause of this conditional and simply clearing the
NLP_UNREG_INP flag appears to resolve the problem with SLI-3 adapters. It
should be noted that the code path in question is not specific to SLI-3,
but there are other SLI-4 code paths which may have masked the issue.
Fixes: 32566a6f1ae5 ("scsi: lpfc: Remove NLP_RELEASE_RPI flag from nodelist structure")
Cc: stable@vger.kernel.org
Tested-by: Marco Patalano <mpatalan@redhat.com>
Signed-off-by: Ewan D. Milne <emilne@redhat.com>
Link: https://lore.kernel.org/r/20250317163731.356873-1-emilne@redhat.com
Reviewed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b5162bb6aa1ec04dff4509b025883524b6d7e7ca ]
Smatch detected a potential use-after-free of an ndlp oject in
dev_loss_tmo_callbk during driver unload or fatal error handling.
Fix by reordering code to avoid potential use-after-free if initial
nodelist reference has been previously removed.
Fixes: 4281f44ea8bf ("scsi: lpfc: Prevent NDLP reference count underflow in dev_loss_tmo callback")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/linux-scsi/41c1d855-9eb5-416f-ac12-8b61929201a3@stanley.mountain/
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20250425194806.3585-6-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 92b99f1a73b7951f05590fd01640dcafdbc82c21 ]
In attempt to reduce the amount of unnecessary ndlp->lock acquisitions
in the lpfc driver, change nlpa_flag into an unsigned long bitmask and
use clear_bit/test_bit bitwise atomic APIs instead of reliance on
ndlp->lock for synchronization.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20241031223219.152342-10-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Stable-dep-of: b5162bb6aa1e ("scsi: lpfc: Avoid potential ndlp use-after-free in dev_loss_tmo_callbk")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 32566a6f1ae558d0e79fed6e17a75c253367a57f ]
An RPI is tightly bound to an NDLP structure and is freed only upon
release of an NDLP object. As such, there should be no logic that frees
an RPI outside of the lpfc_nlp_release() routine. In order to reinforce
the original design usage of RPIs, remove the NLP_RELEASE_RPI flag and
related logic.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20241031223219.152342-9-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Stable-dep-of: b5162bb6aa1e ("scsi: lpfc: Avoid potential ndlp use-after-free in dev_loss_tmo_callbk")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8889676cd62161896f1d861ce294adc29c4f2cb5 ]
sd_read_block_limits_ext() currently assumes that vpd->len excludes the
size of the page header. However, vpd->len describes the size of the entire
VPD page, therefore the sanity check is incorrect.
In practice this is not really a problem since we don't attach VPD
pages unless they actually report data trailing the header. But fix
the length check regardless.
This issue was identified by Wukong-Agent (formerly Tencent Woodpecker), a
code security AI agent, through static code analysis.
[mkp: rewrote patch description]
Signed-off-by: jackysliu <1972843537@qq.com>
Link: https://lore.kernel.org/r/tencent_ADA5210D1317EEB6CD7F3DE9FE9DA4591D05@qq.com
Fixes: 96b171d6dba6 ("scsi: core: Query the Block Limits Extension VPD page")
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 00f452a1b084efbe8dcb60a29860527944a002a1 ]
dma_map_XXX() can fail and should be tested for errors with
dma_mapping_error().
Fixes: b3a271a94d00 ("[SCSI] qla4xxx: support iscsiadm session mgmt")
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Link: https://lore.kernel.org/r/20250618071742.21822-2-fourier.thomas@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c3b214719a87735d4f67333a8ef3c0e31a34837c ]
dma_map_XXX() functions return as error values DMA_MAPPING_ERROR which is
often ~0. The error value should be tested with dma_mapping_error() like
it was done in qla26xx_dport_diagnostics().
Fixes: 818c7f87a177 ("scsi: qla2xxx: Add changes in preparation for vendor extended FDMI/RDP")
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Link: https://lore.kernel.org/r/20250617161115.39888-2-fourier.thomas@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 752eb816b55adb0673727ba0ed96609a17895654 upstream.
On a system with DRAM interleave enabled, out-of-bound access is
detected:
megaraid_sas 0000:3f:00.0: requested/available msix 128/128 poll_queue 0
------------[ cut here ]------------
UBSAN: array-index-out-of-bounds in ./arch/x86/include/asm/topology.h:72:28
index -1 is out of range for type 'cpumask *[1024]'
dump_stack_lvl+0x5d/0x80
ubsan_epilogue+0x5/0x2b
__ubsan_handle_out_of_bounds.cold+0x46/0x4b
megasas_alloc_irq_vectors+0x149/0x190 [megaraid_sas]
megasas_probe_one.cold+0xa4d/0x189c [megaraid_sas]
local_pci_probe+0x42/0x90
pci_device_probe+0xdc/0x290
really_probe+0xdb/0x340
__driver_probe_device+0x78/0x110
driver_probe_device+0x1f/0xa0
__driver_attach+0xba/0x1c0
bus_for_each_dev+0x8b/0xe0
bus_add_driver+0x142/0x220
driver_register+0x72/0xd0
megasas_init+0xdf/0xff0 [megaraid_sas]
do_one_initcall+0x57/0x310
do_init_module+0x90/0x250
init_module_from_file+0x85/0xc0
idempotent_init_module+0x114/0x310
__x64_sys_finit_module+0x65/0xc0
do_syscall_64+0x82/0x170
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Fix it accordingly.
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Link: https://lore.kernel.org/r/20250604042556.3731059-1-yu.c.chen@intel.com
Fixes: 8049da6f3943 ("scsi: megaraid_sas: Use irq_set_affinity_and_hint()")
Cc: stable@vger.kernel.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 2a8a5a5dd06eef580f9818567773fd75057cb875 ]
strsep() modifies the address of the pointer passed to it so that it no
longer points to the original address. This means kfree() gets the wrong
pointer.
Fix this by passing unmodified pointer returned from kstrdup() to
kfree().
Found by Linux Verification Center (linuxtesting.org) with Svace.
Fixes: 4df84e846624 ("scsi: elx: efct: Driver initialization routines")
Signed-off-by: Vitaliy Shevtsov <v.shevtsov@mt-integration.ru>
Link: https://lore.kernel.org/r/20250612163616.24298-1-v.shevtsov@mt-integration.ru
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit b2f966568faaad326de97481096d0f3dc0971c43 upstream.
Currently storvsc_timeout is only used in storvsc_sdev_configure(), and
5s and 10s are used elsewhere. It turns out that rarely the 5s is not
enough on Azure, so let's use storvsc_timeout everywhere.
In case a timeout happens and storvsc_channel_init() returns an error,
close the VMBus channel so that any host-to-guest messages in the
channel's ringbuffer, which might come late, can be safely ignored.
Add a "const" to storvsc_timeout.
Cc: stable@kernel.org
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Link: https://lore.kernel.org/r/1749243459-10419-1-git-send-email-decui@microsoft.com
Reviewed-by: Long Li <longli@microsoft.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit ae82eaf4aeea060bb736c3e20c0568b67c701d7d ]
The strlcat() with FORTIFY support is triggering a panic because it
thinks the target buffer will overflow although the correct target
buffer size is passed in.
Anyway, instead of memset() with 0 followed by a strlcat(), just use
memcpy() and ensure that the resulting buffer is NULL terminated.
BIOSVersion is only used for the lpfc_printf_log() which expects a
properly terminated string.
Signed-off-by: Daniel Wagner <wagi@kernel.org>
Link: https://lore.kernel.org/r/20250409-fix-lpfc-bios-str-v1-1-05dac9e51e13@kernel.org
Reviewed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 01b8bdddcfab035cf70fd9981cb20593564cd15d ]
Add in support for more PCI devices.
All PCI ID entries in Hex.
Add PCI IDs for Ramaxel controllers:
VID / DID / SVID / SDID
---- ---- ---- ----
Ramaxel SmartHBA RX8238-16i 9005 028f 1018 8238
Ramaxel SSSRAID card 9005 028f 1f3f 0610
Add PCI ID for Alibaba controller:
VID / DID / SVID / SDID
---- ---- ---- ----
HBA AS1340 9005 028f 1ded 3301
Add PCI IDs for Inspur controller:
VID / DID / SVID / SDID
---- ---- ---- ----
RT0800M6E2i 9005 028f 1bd4 00a3
Add PCI IDs for Delta controllers:
VID / DID / SVID / SDID
---- ---- ---- ----
ThinkSystem 4450-8i SAS/SATA/NVMe PCIe Gen4 9005 028f 1d49 0222
24Gb HBA
ThinkSystem 4450-16i SAS/SATA/NVMe PCIe Gen4 9005 028f 1d49 0223
24Gb HBA
ThinkSystem 4450-8e SAS/SATA PCIe Gen4 9005 028f 1d49 0224
24Gb HBA
ThinkSystem RAID 4450-16e PCIe Gen4 24Gb 9005 028f 1d49 0225
Adapter HBA
ThinkSystem RAID 5450-16i PCIe Gen4 24Gb Adapter 9005 028f 1d49 0521
ThinkSystem RAID 9450-8i 4GB Flash PCIe Gen4 9005 028f 1d49 0624
24Gb Adapter
ThinkSystem RAID 9450-16i 4GB Flash PCIe Gen4 9005 028f 1d49 0625
24Gb Adapter
ThinkSystem RAID 9450-16i 4GB Flash PCIe Gen4 9005 028f 1d49 0626
24Gb Adapter
ThinkSystem RAID 9450-32i 8GB Flash PCIe Gen4 9005 028f 1d49 0627
24Gb Adapter
ThinkSystem RAID 9450-16e 4GB Flash PCIe Gen4 9005 028f 1d49 0628
24Gb Adapter
Add PCI ID for Cloudnine Controller:
VID / DID / SVID / SDID
---- ---- ---- ----
SmartHBA P6600-24i 9005 028f 1f51 100b
Add PCI IDs for Hurraydata Controllers:
VID / DID / SVID / SDID
---- ---- ---- ----
HRDT TrustHBA H4100-8i 9005 028f 207d 4044
HRDT TrustHBA H4100-8e 9005 028f 207d 4054
HRDT TrustHBA H4100-16i 9005 028f 207d 4084
HRDT TrustHBA H4100-16e 9005 028f 207d 4094
HRDT TrustRAID D3152s-8i 9005 028f 207d 4140
HRDT TrustRAID D3154s-8i 9005 028f 207d 4240
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Signed-off-by: David Strahan <david.strahan@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Link: https://lore.kernel.org/r/20250423183229.538572-3-don.brace@microchip.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 05ae6c9c7315d844fbc15afe393f5ba5e5771126 ]
In lpfc_check_sli_ndlp(), the get_job_els_rsp64_did remote_id assignment
does not apply for GEN_REQUEST64 commands as it only has meaning for a
ELS_REQUEST64 command. So, if (iocb->ndlp == ndlp) is false, we could
erroneously return the wrong value. Fix by replacing the fallthrough
statement with a break statement before the remote_id check.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20250425194806.3585-2-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9b17621366d210ffee83262a8754086ebbde5e55 ]
Correct the error handling goto labels used when host lookup fails in
various flashnode-related event handlers:
- iscsi_new_flashnode()
- iscsi_del_flashnode()
- iscsi_login_flashnode()
- iscsi_logout_flashnode()
- iscsi_logout_flashnode_sid()
scsi_host_put() is not required when shost is NULL, so jumping to the
correct label avoids unnecessary operations. These functions previously
jumped to the wrong goto label (put_host), which did not match the
intended cleanup logic.
Use the correct exit labels (exit_new_fnode, exit_del_fnode, etc.) to
ensure proper error handling. Also remove the unused put_host label
under iscsi_new_flashnode() as it is no longer needed.
No functional changes beyond accurate error path correction.
Fixes: c6a4bb2ef596 ("[SCSI] scsi_transport_iscsi: Add flash node mgmt support")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Link: https://lore.kernel.org/r/20250530193012.3312911-1-alok.a.tiwari@oracle.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 42d033cf4b517e91c187ad2fbd7b30fdc6d2d62c ]
Correct kernel call trace when calling smp_processor_id() when called in
preemptible kernels by using raw_smp_processor_id().
smp_processor_id() checks to see if preemption is disabled and if not,
issue an error message followed by a call to dump_stack().
Brief example of call trace:
kernel: check_preemption_disabled: 436 callbacks suppressed
kernel: BUG: using smp_processor_id() in preemptible [00000000]
code: kworker/u1025:0/2354
kernel: caller is pqi_scsi_queue_command+0x183/0x310 [smartpqi]
kernel: CPU: 129 PID: 2354 Comm: kworker/u1025:0
kernel: ...
kernel: Workqueue: writeback wb_workfn (flush-253:0)
kernel: Call Trace:
kernel: <TASK>
kernel: dump_stack_lvl+0x34/0x48
kernel: check_preemption_disabled+0xdd/0xe0
kernel: pqi_scsi_queue_command+0x183/0x310 [smartpqi]
kernel: ...
Fixes: 283dcc1b142e ("scsi: smartpqi: add counter for parity write stream requests")
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Tested-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Link: https://lore.kernel.org/r/20250423183229.538572-5-don.brace@microchip.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e4d953ca557e02edd3aed7390043e1b8ad1c9723 ]
In commit 21c7e972475e ("scsi: hisi_sas: Disable SATA disk phy for severe
I_T nexus reset failure"), if the softreset fails upon certain
conditions, the PHY connected to the disk is disabled directly. Manual
recovery is required, which is inconvenient for users in actual use.
In addition, SATA disks do not support simultaneous connection of multiple
hosts. Therefore, when multiple controllers are connected to a SATA disk
at the same time, the controller which is connected later failed to issue
an ATA softreset to the SATA disk. As a result, the PHY associated with
the disk is disabled and cannot be automatically recovered.
Now that, we will not focus on the execution result of softreset. No
matter whether the execution is successful or not, we will directly carry
out I_T_nexus_reset.
Fixes: 21c7e972475e ("scsi: hisi_sas: Disable SATA disk phy for severe I_T nexus reset failure")
Signed-off-by: Yihang Li <liyihang9@huawei.com>
Link: https://lore.kernel.org/r/20250414080845.1220997-4-liyihang9@huawei.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d8720235d5b5cad86c1f07f65117ef2a96f8bec7 ]
Recent fixes to the randstruct GCC plugin allowed it to notice
that this structure is entirely function pointers and is therefore
subject to randomization, but doing so requires that it always use
designated initializers. Explicitly specify the "common" member as being
initialized. Silences:
drivers/scsi/qedf/qedf_main.c:702:9: error: positional initialization of field in 'struct' declared with 'designated_init' attribute [-Werror=designated-init]
702 | {
| ^
Fixes: 035f7f87b729 ("randstruct: Enable Clang support")
Link: https://lore.kernel.org/r/20250502224156.work.617-kees@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7081dc75df79696d8322d01821c28e53416c932c ]
Some of the allowed operations put the tape into a known position to
continue operation assuming only the tape position has changed. But reset
sets partition, density and block size to drive default values. These
should be restored to the values before reset.
Normally the current block size and density are stored by the drive. If
the settings have been changed, the changed values have to be saved by the
driver across reset.
Signed-off-by: Kai Mäkisara <Kai.Makisara@kolumbus.fi>
Link: https://lore.kernel.org/r/20250120194925.44432-2-Kai.Makisara@kolumbus.fi
Reviewed-by: John Meneghini <jmeneghi@redhat.com>
Tested-by: John Meneghini <jmeneghi@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f0842902b383982d1f72c490996aa8fc29a7aa0d ]
Fix smatch warning regarding missed calls to free_irq(). Free the phba IRQ
in the failed pci_irq_vector cases.
lpfc_init.c: lpfc_sli4_enable_msi() warn: 'phba->pcidev->irq' from
request_irq() not released.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20250131000524.163662-3-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 23ed62897746f49f195d819ce6edeb1db27d1b72 ]
With repeated port swaps between separate fabrics, there can be multiple
registrations for fabric well known address 0xfffffe. This can cause ndlp
reference confusion due to the usage of a single ndlp ptr that stores the
rport object in fc_rport struct private storage during transport
registration. Subsequent registrations update the ndlp->rport field with
the newer rport, so when transport layer triggers dev_loss_tmo for the
earlier registered rport the ndlp->rport private storage is referencing the
newer rport instead of the older rport in dev_loss_tmo callbk.
Because the older ndlp->rport object is already cleaned up elsewhere in
driver code during the time of fabric swap, check that the rport provided
in dev_loss_tmo callbk actually matches the rport stored in the LLDD's
ndlp->rport field. Otherwise, skip dev_loss_tmo work on a stale rport.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20250131000524.163662-4-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
