| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
commit 2eeb03ad9f42dfece63051be2400af487ddb96d2 upstream.
When some client process A call pdr_add_lookup() to add the look up for
the service and does schedule locator work, later a process B got a new
server packet indicating locator is up and call pdr_locator_new_server()
which eventually sets pdr->locator_init_complete to true which process A
sees and takes list lock and queries domain list but it will timeout due
to deadlock as the response will queued to the same qmi->wq and it is
ordered workqueue and process B is not able to complete new server
request work due to deadlock on list lock.
Fix it by removing the unnecessary list iteration as the list iteration
is already being done inside locator work, so avoid it here and just
call schedule_work() here.
Process A Process B
process_scheduled_works()
pdr_add_lookup() qmi_data_ready_work()
process_scheduled_works() pdr_locator_new_server()
pdr->locator_init_complete=true;
pdr_locator_work()
mutex_lock(&pdr->list_lock);
pdr_locate_service() mutex_lock(&pdr->list_lock);
pdr_get_domain_list()
pr_err("PDR: %s get domain list
txn wait failed: %d\n",
req->service_name,
ret);
Timeout error log due to deadlock:
"
PDR: tms/servreg get domain list txn wait failed: -110
PDR: service lookup for msm/adsp/sensor_pd:tms/servreg failed: -110
"
Thanks to Bjorn and Johan for letting me know that this commit also fixes
an audio regression when using the in-kernel pd-mapper as that makes it
easier to hit this race. [1]
Link: https://lore.kernel.org/lkml/Zqet8iInnDhnxkT9@hovoldconsulting.com/ # [1]
Fixes: fbe639b44a82 ("soc: qcom: Introduce Protection Domain Restart helpers")
CC: stable@vger.kernel.org
Reviewed-by: Bjorn Andersson <bjorn.andersson@oss.qualcomm.com>
Tested-by: Bjorn Andersson <bjorn.andersson@oss.qualcomm.com>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Saranya R <quic_sarar@quicinc.com>
Co-developed-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250212163720.1577876-1-mukesh.ojha@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 262666c04be6afa8f15b6c318596b54c37499cda ]
String assembly should use sysfs_emit_at() instead of sysfs_emit().
Fixes: 23fe8112a231 ("soc: hisilicon: kunpeng_hccs: Add used HCCS types sysfs")
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Link: https://lore.kernel.org/r/20250314100143.3377268-1-lihuisong@huawei.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit cf7139aac463880cbd5c5e999c118fbe91631411 ]
Unregister the cpufreq device and soc device when resource unwinding,
otherwise there will be warning when do removing test:
sysfs: cannot create duplicate filename '/devices/platform/imx-cpufreq-dt'
CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.13.0-rc1-next-20241204
Hardware name: NXP i.MX8MPlus EVK board (DT)
Fixes: 9cc832d37799 ("soc: imx8m: Probe the SoC driver as platform driver")
Cc: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit e31e3f6c0ce473f7ce1e70d54ac8e3ed190509f8 upstream.
Add check for the return value of devm_kstrdup() in
loongson2_guts_probe() to catch potential exception.
Fixes: b82621ac8450 ("soc: loongson: add GUTS driver for loongson-2 platforms")
Cc: stable@vger.kernel.org
Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com>
Link: https://lore.kernel.org/r/20250220081714.2676828-1-haoxiang_li2024@163.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 29a61a1f40637ae010b828745fb41f60301c3a3d ]
The space separator was factored out from the multiple chip name prints,
but several irq_chip::irq_print_chip() callbacks still print a leading
space. Remove the superfluous double spaces.
Fixes: 9d9f204bdf7243bf ("genirq/proc: Add missing space separator back")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/893f7e9646d8933cd6786d5a1ef3eb076d263768.1738764803.git.geert+renesas@glider.be
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 836b341cc8dab680acc06a7883bfeea89680b689 ]
Various Nvidia userspace applications and tests access following fuse
via Fuse nvmem interface:
* odmid
* odminfo
* boot_security_info
* public_key_hash
* reserved_odm0
* reserved_odm1
* reserved_odm2
* reserved_odm3
* reserved_odm4
* reserved_odm5
* reserved_odm6
* reserved_odm7
* odm_lock
* pk_h1
* pk_h2
* revoke_pk_h0
* revoke_pk_h1
* security_mode
* system_fw_field_ratchet0
* system_fw_field_ratchet1
* system_fw_field_ratchet2
* system_fw_field_ratchet3
* optin_enable
Update tegra234_fuse_keepouts list to allow reading these fuse from
nvmem sysfs interface.
Signed-off-by: Kartik Rajput <kkartik@nvidia.com>
Link: https://lore.kernel.org/r/20241127061053.16775-1-kkartik@nvidia.com
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c88c323b610a6048b87c5d9fff69659678f69924 ]
The 'broadcast' register space is present only in chipsets that
have multiple instances of LLCC IP. Since IPQ5424 has only one
instance, both the LLCC and LLCC_BROADCAST points to the same
register space.
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241121051935.1055222-3-quic_varada@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 70096b4990848229d0784c5e51dc3c7c072f1111 upstream.
If of_parse_phandle_with_args() succeeds, the OF node reference should
be dropped, regardless of number of phandle arguments.
Cc: stable@vger.kernel.org
Fixes: 9460ae2ff308 ("soc: qcom: Introduce common SMEM state machine code")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240822164853.231087-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 35d8bc131de0f0f280f0db42499512d79f05f456 upstream.
The Last Level Cache is split into many slices, each one of which can
be toggled on or off.
Only certain slices are recommended to be turned on unconditionally,
in order to reach optimal performance/latency/power levels.
Enable WRCACHE on X1 at boot, in accordance with internal
recommendations.
No significant performance difference is expected.
Fixes: b3cf69a43502 ("soc: qcom: llcc: Add configuration data for X1E80100")
Cc: stable@vger.kernel.org
Reviewed-by: Rajendra Nayak <quic_rjendra@quicinc.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20241219-topic-llcc_x1e_wrcache-v3-1-b9848d9c3d63@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c9c0036c1990da8d2dd33563e327e05a775fcf10 upstream.
Driver removal should fully clean up - unmap the memory.
Fixes: 0890beb22618 ("soc: mediatek: add mt6779 devapc driver")
Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250104142012.115974-2-krzysztof.kozlowski@linaro.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c0eb059a4575ed57f265d9883a5203799c19982c upstream.
Error paths of mtk_devapc_probe() should unmap the memory. Reported by
Smatch:
drivers/soc/mediatek/mtk-devapc.c:292 mtk_devapc_probe() warn: 'ctx->infra_base' from of_iomap() not released on lines: 277,281,286.
Fixes: 0890beb22618 ("soc: mediatek: add mt6779 devapc driver")
Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250104142012.115974-1-krzysztof.kozlowski@linaro.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit eca836dfd8386b32f1aae60f8e323218ac6a0b75 upstream.
If tensor_set_bits_atomic() is called with a mask of 0 the function will
just iterate over its bit, not perform any updates and return stack
value of 'ret'.
Also reported by smatch:
drivers/soc/samsung/exynos-pmu.c:129 tensor_set_bits_atomic() error: uninitialized symbol 'ret'.
Fixes: 0b7c6075022c ("soc: samsung: exynos-pmu: Add regmap support for SoCs that protect PMU regs")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250104135605.109209-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 22cf4fae6660b6e1a583a41cbf84e3046ca9ccd0 upstream.
On MSM8916 devices, the serial number exposed in sysfs is constant and does
not change across individual devices. It's always:
db410c:/sys/devices/soc0$ cat serial_number
2644893864
The firmware used on MSM8916 exposes SOCINFO_VERSION(0, 8), which does not
have support for the serial_num field in the socinfo struct. There is an
existing check to avoid exposing the serial number in that case, but it's
not correct: When checking the item_size returned by SMEM, we need to make
sure the *end* of the serial_num is within bounds, instead of comparing
with the *start* offset. The serial_number currently exposed on MSM8916
devices is just an out of bounds read of whatever comes after the socinfo
struct in SMEM.
Fix this by changing offsetof() to offsetofend(), so that the size of the
field is also taken into account.
Cc: stable@vger.kernel.org
Fixes: efb448d0a3fc ("soc: qcom: Add socinfo driver")
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20241230-qcom-socinfo-serialno-oob-v1-1-9b7a890da3da@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit d3455ab798100f40af77123e7c2443ec979c546b ]
A device_node acquired via of_find_node_by_path() requires explicit
calls to of_node_put() when it is no longer needed to avoid leaking the
resource.
Instead of adding the missing calls to of_node_put() in all execution
paths, use the cleanup attribute for 'np' by means of the __free()
macro, which automatically calls of_node_put() when the variable goes
out of scope.
Fixes: 960ddf70cc11 ("drivers: soc: atmel: Avoid calling at91_soc_init on non AT91 SoCs")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20241031-soc-atmel-soc-cleanup-v2-1-73f2d235fd98@gmail.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"The most significant set of changes is the per netns RTNL. The new
behavior is disabled by default, regression risk should be contained.
Notably the new config knob PTP_1588_CLOCK_VMCLOCK will inherit its
default value from PTP_1588_CLOCK_KVM, as the first is intended to be
a more reliable replacement for the latter.
Core:
- Started a very large, in-progress, effort to make the RTNL lock
scope per network-namespace, thus reducing the lock contention
significantly in the containerized use-case, comprising:
- RCU-ified some relevant slices of the FIB control path
- introduce basic per netns locking helpers
- namespacified the IPv4 address hash table
- remove rtnl_register{,_module}() in favour of
rtnl_register_many()
- refactor rtnl_{new,del,set}link() moving as much validation as
possible out of RTNL lock
- convert all phonet doit() and dumpit() handlers to RCU
- convert IPv4 addresses manipulation to per-netns RTNL
- convert virtual interface creation to per-netns RTNL
the per-netns lock infrastructure is guarded by the
CONFIG_DEBUG_NET_SMALL_RTNL knob, disabled by default ad interim.
- Introduce NAPI suspension, to efficiently switching between busy
polling (NAPI processing suspended) and normal processing.
- Migrate the IPv4 routing input, output and control path from direct
ToS usage to DSCP macros. This is a work in progress to make ECN
handling consistent and reliable.
- Add drop reasons support to the IPv4 rotue input path, allowing
better introspection in case of packets drop.
- Make FIB seqnum lockless, dropping RTNL protection for read access.
- Make inet{,v6} addresses hashing less predicable.
- Allow providing timestamp OPT_ID via cmsg, to correlate TX packets
and timestamps
Things we sprinkled into general kernel code:
- Add small file operations for debugfs, to reduce the struct ops
size.
- Refactoring and optimization for the implementation of page_frag
API, This is a preparatory work to consolidate the page_frag
implementation.
Netfilter:
- Optimize set element transactions to reduce memory consumption
- Extended netlink error reporting for attribute parser failure.
- Make legacy xtables configs user selectable, giving users the
option to configure iptables without enabling any other config.
- Address a lot of false-positive RCU issues, pointed by recent CI
improvements.
BPF:
- Put xsk sockets on a struct diet and add various cleanups. Overall,
this helps to bump performance by 12% for some workloads.
- Extend BPF selftests to increase coverage of XDP features in
combination with BPF cpumap.
- Optimize and homogenize bpf_csum_diff helper for all archs and also
add a batch of new BPF selftests for it.
- Extend netkit with an option to delegate skb->{mark,priority}
scrubbing to its BPF program.
- Make the bpf_get_netns_cookie() helper available also to tc(x) BPF
programs.
Protocols:
- Introduces 4-tuple hash for connected udp sockets, speeding-up
significantly connected sockets lookup.
- Add a fastpath for some TCP timers that usually expires after
close, the socket lock contention.
- Add inbound and outbound xfrm state caches to speed up state
lookups.
- Avoid sending MPTCP advertisements on stale subflows, reducing
risks on loosing them.
- Make neighbours table flushing more scalable, maintaining per
device neigh lists.
Driver API:
- Introduce a unified interface to configure transmission H/W
shaping, and expose it to user-space via generic-netlink.
- Add support for per-NAPI config via netlink. This makes napi
configuration persistent across queues removal and re-creation.
Requires driver updates, currently supported drivers are:
nVidia/Mellanox mlx4 and mlx5, Broadcom brcm and Intel ice.
- Add ethtool support for writing SFP / PHY firmware blocks.
- Track RSS context allocation from ethtool core.
- Implement support for mirroring to DSA CPU port, via TC mirror
offload.
- Consolidate FDB updates notification, to avoid duplicates on
device-specific entries.
- Expose DPLL clock quality level to the user-space.
- Support master-slave PHY config via device tree.
Tests and tooling:
- forwarding: introduce deferred commands, to simplify the cleanup
phase
Drivers:
- Updated several drivers - Amazon vNic, Google vNic, Microsoft vNic,
Intel e1000e and Broadcom Tigon3 - to use netdev-genl to link the
IRQs and queues to NAPI IDs, allowing busy polling and better
introspection.
- Ethernet high-speed NICs:
- nVidia/Mellanox:
- mlx5:
- a large refactor to implement support for cross E-Switch
scheduling
- refactor H/W conter management to let it scale better
- H/W GRO cleanups
- Intel (100G, ice)::
- add support for ethtool reset
- implement support for per TX queue H/W shaping
- AMD/Solarflare:
- implement per device queue stats support
- Broadcom (bnxt):
- improve wildcard l4proto on IPv4/IPv6 ntuple rules
- Marvell Octeon:
- Add representor support for each Resource Virtualization Unit
(RVU) device.
- Hisilicon:
- add support for the BMC Gigabit Ethernet
- IBM (EMAC):
- driver cleanup and modernization
- Cisco (VIC):
- raise the queues number limit to 256
- Ethernet virtual:
- Google vNIC:
- implement page pool support
- macsec:
- inherit lower device's features and TSO limits when
offloading
- virtio_net:
- enable premapped mode by default
- support for XDP socket(AF_XDP) zerocopy TX
- wireguard:
- set the TSO max size to be GSO_MAX_SIZE, to aggregate larger
packets.
- Ethernet NICs embedded and virtual:
- Broadcom ASP:
- enable software timestamping
- Freescale:
- add enetc4 PF driver
- MediaTek: Airoha SoC:
- implement BQL support
- RealTek r8169:
- enable TSO by default on r8168/r8125
- implement extended ethtool stats
- Renesas AVB:
- enable TX checksum offload
- Synopsys (stmmac):
- support header splitting for vlan tagged packets
- move common code for DWMAC4 and DWXGMAC into a separate FPE
module.
- add dwmac driver support for T-HEAD TH1520 SoC
- Synopsys (xpcs):
- driver refactor and cleanup
- TI:
- icssg_prueth: add VLAN offload support
- Xilinx emaclite:
- add clock support
- Ethernet switches:
- Microchip:
- implement support for the lan969x Ethernet switch family
- add LAN9646 switch support to KSZ DSA driver
- Ethernet PHYs:
- Marvel: 88q2x: enable auto negotiation
- Microchip: add support for LAN865X Rev B1 and LAN867X Rev C1/C2
- PTP:
- Add support for the Amazon virtual clock device
- Add PtP driver for s390 clocks
- WiFi:
- mac80211
- EHT 1024 aggregation size for transmissions
- new operation to indicate that a new interface is to be added
- support radio separation of multi-band devices
- move wireless extension spy implementation to libiw
- Broadcom:
- brcmfmac: optional LPO clock support
- Microchip:
- add support for Atmel WILC3000
- Qualcomm (ath12k):
- firmware coredump collection support
- add debugfs support for a multitude of statistics
- Qualcomm (ath5k):
- Arcadyan ARV45XX AR2417 & Gigaset SX76[23] AR241[34]A support
- Realtek:
- rtw88: 8821au and 8812au USB adapters support
- rtw89: add thermal protection
- rtw89: fine tune BT-coexsitence to improve user experience
- rtw89: firmware secure boot for WiFi 6 chip
- Bluetooth
- add Qualcomm WCN785x support for ids Foxconn 0xe0fc/0xe0f3 and
0x13d3:0x3623
- add Realtek RTL8852BE support for id Foxconn 0xe123
- add MediaTek MT7920 support for wireless module ids
- btintel_pcie: add handshake between driver and firmware
- btintel_pcie: add recovery mechanism
- btnxpuart: add GPIO support to power save feature"
* tag 'net-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1475 commits)
mm: page_frag: fix a compile error when kernel is not compiled
Documentation: tipc: fix formatting issue in tipc.rst
selftests: nic_performance: Add selftest for performance of NIC driver
selftests: nic_link_layer: Add selftest case for speed and duplex states
selftests: nic_link_layer: Add link layer selftest for NIC driver
bnxt_en: Add FW trace coredump segments to the coredump
bnxt_en: Add a new ethtool -W dump flag
bnxt_en: Add 2 parameters to bnxt_fill_coredump_seg_hdr()
bnxt_en: Add functions to copy host context memory
bnxt_en: Do not free FW log context memory
bnxt_en: Manage the FW trace context memory
bnxt_en: Allocate backing store memory for FW trace logs
bnxt_en: Add a 'force' parameter to bnxt_free_ctx_mem()
bnxt_en: Refactor bnxt_free_ctx_mem()
bnxt_en: Add mem_valid bit to struct bnxt_ctx_mem_type
bnxt_en: Update firmware interface spec to 1.10.3.85
selftests/bpf: Add some tests with sockmap SK_PASS
bpf: fix recursive lock when verdict program return SK_PASS
wireguard: device: support big tcp GSO
wireguard: selftests: load nf_conntrack if not present
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"Nothing particular important in the SoC driver updates, just the usual
improvements to for drivers/soc and a couple of subsystems that don't
fit anywhere else:
- The largest set of updates is for Qualcomm SoC drivers, extending
the set of supported features for additional SoCs in the QSEECOM,
LLCC and socinfo drivers.a
- The ti_sci firmware driver gains support for power managment
- The drivers/reset subsystem sees a rework of the microchip sparx5
and amlogic reset drivers to support additional chips, plus a few
minor updates on other platforms
- The SCMI firmware interface driver gains support for two protocol
extensions, allowing more flexible use of the shared memory area
and new DT binding properties for configurability.
- Mediatek SoC drivers gain support for power managment on the MT8188
SoC and a new driver for DVFS.
- The AMD/Xilinx ZynqMP SoC drivers gain support for system reboot
and a few bugfixes
- The Hisilicon Kunpeng HCCS driver gains support for configuring
lanes through sysfs
Finally, there are cleanups and minor fixes for drivers/{soc, bus,
memory}, including changing back the .remove_new callback to .remove,
as well as a few other updates for freescale (powerpc) soc drivers,
NXP i.MX soc drivers, cznic turris platform driver, memory controller
drviers, TI OMAP SoC drivers, and Tegra firmware drivers"
* tag 'soc-drivers-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (116 commits)
soc: fsl: cpm1: qmc: Set the ret error code on platform_get_irq() failure
soc: fsl: rcpm: fix missing of_node_put() in copy_ippdexpcr1_setting()
soc: fsl: cpm1: tsa: switch to for_each_available_child_of_node_scoped()
platform: cznic: turris-omnia-mcu: Rename variable holding GPIO line names
platform: cznic: turris-omnia-mcu: Document the driver private data structure
firmware: turris-mox-rwtm: Document the driver private data structure
bus: Switch back to struct platform_driver::remove()
soc: qcom: ice: Remove the device_link field in qcom_ice
drm/msm/adreno: Setup SMMU aparture for per-process page table
firmware: qcom: scm: Introduce CP_SMMU_APERTURE_ID
firmware: arm_scpi: Check the DVFS OPP count returned by the firmware
soc: qcom: socinfo: add IPQ5424/IPQ5404 SoC ID
dt-bindings: arm: qcom,ids: add SoC ID for IPQ5424/IPQ5404
soc: qcom: llcc: Flip the manual slice configuration condition
dt-bindings: firmware: qcom,scm: Document sm8750 SCM
firmware: qcom: uefisecapp: Allow X1E Devkit devices
misc: lan966x_pci: Fix dtc warn 'Missing interrupt-parent'
misc: lan966x_pci: Fix dtc warns 'missing or empty reg/ranges property'
soc: qcom: llcc: Add LLCC configuration for the QCS8300 platform
dt-bindings: cache: qcom,llcc: Document the QCS8300 LLCC
...
|
|
Pull SoC devicetree updates from Arnd Bergmann:
"This release adds the devicetree files for an impressive number of new
SoC variants, though as expected these are all related to others we
already support:
- The microchip sam9x7 devicetree is now added, after the device
driver and platform code has already made it in. This is likely the
last ARMv5 (!) platform to ever get added, updating the 20+ year
old at91/sam9 platform with DDR3 memory and gigabit ethernet.
- On the Apple platform, there are now devicetree files for a number
of A-series SoCs in addition to the M-series ones, these are used
primarily in phones and tablets, but are closely related to the
already supported chips.
- Samsung Exynos 8895 and Exynos 990 are more phone SoCs used in
older Samsung Galaxy phones.
- Qualcomm Snapdragon 778G (SM7325) is another phone SoC, closely
related to the Snapdragon 7c+ Gen 3 (SC7280) used in low-end
laptops.
- Rockchip RK3528 and RK3576 are new variants of their TV box and
Tablet chips, still using the older ARMv8.0 cores from
RK3328/RK3399 but with a newer process and other improvements from
the RK35xx (otherwise ARMv8.2) chips. RK3566T and RK3399-S are also
added, these are just lower-cost versions of their normal
counterparts.
- TI J742S2 is a feature-reduced version of the J784s4
industrial/automotive SoC, with fewer CPU cores.
- Sophgo SG2002 is an embedded SoC with one RISC-V (C906) and one ARM
(Cortex-A53) core, at this point support is only added for running
on the RISC-V side on the LicheeRV Nano board.
A total of 92 new .dts files describing individual machines is added,
which must be a new record. The majority of these is for the newly
added chips above, notably all the Apple phones and tablets. The other
new machines include nine industrial/embedded boards with NXP i.MX6 or
i.MX8 SoCs, eight for Rockchips RK35XX and one or two each for
Rockchips RV1109, RK3308, Allwinner A33, Tegra 234, Qualcomm
qcs9100/sc8280xp/x1e80100, TI AM625 and Starfive JH7110.
As usual there are also many newly added features in existing boards
as well as cleanups and minor bugfixes"
* tag 'soc-dt-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (718 commits)
arm64: dts: apm: Remove unused and undocumented "bus_num" property
arm: dts: spear13xx: Remove unused and undocumented "pl022,slave-tx-disable" property
arm64: dts: amd: Remove unused and undocumented "amd,zlib-support" property
arm64: dts: lg131x: Update spi clock properties
arm64: dts: seattle: Update spi clock properties
arm64: dts: rockchip: use less broad pinctrl for pcie3x1 on Radxa E25
arm64: dts: rockchip: add Radxa ROCK 5C
dt-bindings: arm: rockchip: add Radxa ROCK 5C
arm64: dts: rockchip: orangepi-5-plus: Enable GPU
arm64: dts: rockchip: enable USB3 on NanoPC-T6
arm64: dts: rockchip: adapt regulator nodenames to preferred form
arm64: dts: rockchip: Enable HDMI display for rk3588 Cool Pi GenBook
arm64: dts: rockchip: Enable HDMI display for rk3588 Cool Pi 4B
arm64: dts: rockchip: Enable HDMI0 for rk3588 Cool Pi CM5 EVB
arm64: dts: rockchip: Enable HDMI on NanoPi R6C/R6S
arm64: dts: rockchip: Enable GPU on NanoPi R6C/R6S
arm64: dts: rockchip: Enable HDMI on Hardkernel ODROID-M2
arm64: dts: rockchip: Remove non-removable flag from sdmmc on rk3576-sige5
arm64: dts: allwinner: a100: perf1: Add eMMC and MMC node
arm64: dts: allwinner: pinephone: Add mount matrix to accelerometer
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull interrupt subsystem updates from Thomas Gleixner:
"Tree wide:
- Make nr_irqs static to the core code and provide accessor functions
to remove existing and prevent future aliasing problems with local
variables or function arguments of the same name.
Core code:
- Prevent freeing an interrupt in the devres code which is not
managed by devres in the first place.
- Use seq_put_decimal_ull_width() for decimal values output in
/proc/interrupts which increases performance significantly as it
avoids parsing the format strings over and over.
- Optimize raising the timer and hrtimer soft interrupts by using the
'set bit only' variants instead of the combined version which
checks whether ksoftirqd should be woken up. The latter is a
pointless exercise as both soft interrupts are raised in the
context of the timer interrupt and therefore never wake up
ksoftirqd.
- Delegate timer/hrtimer soft interrupt processing to a dedicated
thread on RT.
Timer and hrtimer soft interrupts are always processed in ksoftirqd
on RT enabled kernels. This can lead to high latencies when other
soft interrupts are delegated to ksoftirqd as well.
The separate thread allows to run them seperately under a RT
scheduling policy to reduce the latency overhead.
Drivers:
- New drivers or extensions of existing drivers to support Renesas
RZ/V2H(P), Aspeed AST27XX, T-HEAD C900 and ATMEL sam9x7 interrupt
chips
- Support for multi-cluster GICs on MIPS.
MIPS CPUs can come with multiple CPU clusters, where each CPU
cluster has its own GIC (Generic Interrupt Controller). This
requires to access the GIC of a remote cluster through a redirect
register block.
This is encapsulated into a set of helper functions to keep the
complexity out of the actual code paths which handle the GIC
details.
- Support for encrypted guests in the ARM GICV3 ITS driver
The ITS page needs to be shared with the hypervisor and therefore
must be decrypted.
- Small cleanups and fixes all over the place"
* tag 'irq-core-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (50 commits)
irqchip/riscv-aplic: Prevent crash when MSI domain is missing
genirq/proc: Use seq_put_decimal_ull_width() for decimal values
softirq: Use a dedicated thread for timer wakeups on PREEMPT_RT.
timers: Use __raise_softirq_irqoff() to raise the softirq.
hrtimer: Use __raise_softirq_irqoff() to raise the softirq
riscv: defconfig: Enable T-HEAD C900 ACLINT SSWI drivers
irqchip: Add T-HEAD C900 ACLINT SSWI driver
dt-bindings: interrupt-controller: Add T-HEAD C900 ACLINT SSWI device
irqchip/stm32mp-exti: Use of_property_present() for non-boolean properties
irqchip/mips-gic: Fix selection of GENERIC_IRQ_EFFECTIVE_AFF_MASK
irqchip/mips-gic: Prevent indirect access to clusters without CPU cores
irqchip/mips-gic: Multi-cluster support
irqchip/mips-gic: Setup defaults in each cluster
irqchip/mips-gic: Support multi-cluster in for_each_online_cpu_gic()
irqchip/mips-gic: Replace open coded online CPU iterations
genirq/irqdesc: Use str_enabled_disabled() helper in wakeup_show()
genirq/devres: Don't free interrupt which is not managed by devres
irqchip/gic-v3-its: Fix over allocation in itt_alloc_pool()
irqchip/aspeed-intc: Add AST27XX INTC support
dt-bindings: interrupt-controller: Add support for ASPEED AST27XX INTC
...
|
|
FSL SOC changes for 6.13:
- Fix a missing of_node_put() in RCPM
- Fix a missing error code on failure in CPM1 QMC
- Switch to using for_each_available_child_of_node_scoped() in CPM1 TSA
* tag 'soc_fsl-6.13-1' of https://github.com/chleroy/linux:
soc: fsl: cpm1: qmc: Set the ret error code on platform_get_irq() failure
soc: fsl: rcpm: fix missing of_node_put() in copy_ippdexpcr1_setting()
soc: fsl: cpm1: tsa: switch to for_each_available_child_of_node_scoped()
Link: https://lore.kernel.org/r/c3c4961b-fe2a-4fcc-a7a1-f8b5352e09a2@csgroup.eu
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
A kernel test robot detected a missing error code:
qmc.c:1942 qmc_probe() warn: missing error code 'ret'
Indeed, the error returned by platform_get_irq() is checked and the
operation is aborted in case of failure but the ret error code is
not set in that case.
Set the ret error code.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202411051350.KNy6ZIWA-lkp@intel.com/
Fixes: 3178d58e0b97 ("soc: fsl: cpm1: Add support for QMC")
Cc: stable@vger.kernel.org
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Link: https://lore.kernel.org/r/20241105145623.401528-1-herve.codina@bootlin.com
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
|
|
of_find_compatible_node() requires a call to of_node_put() when the
pointer to the node is not required anymore to decrement its refcount
and avoid leaking memory.
Add the missing call to of_node_put() after the node has been used.
Cc: stable@vger.kernel.org
Fixes: e95f287deed2 ("soc: fsl: handle RCPM errata A-008646 on SoC LS1021A")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20241013-rcpm-of_node_put-v1-1-9a8e55a01eae@gmail.com
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
|
|
The non-scoped variant of this macro turns error-prone as soon as error
paths are included, because explicit calls to of_node_put() are required
to avoid leaking memory.
Using its scoped counterpart simplifies the code by removing the need of
explicit calls to of_node_put(), as they are automatically triggered as
soon as the child node goes out of scope. Moreover, it is more robust as
it accounts for new error paths without having to worry about
decrementing the object's refcount.
Note that the device_node is declared within the macro, and its explicit
declaration can be dropped as well if it is not used anywhere else.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Acked-by: Herve Codina <herve.codina@bootlin.com>
Link: https://lore.kernel.org/r/20241002-tsa-scoped-v1-1-ba6a6d657f82@gmail.com
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers
A few more Qualcomm driver updates for v6.13
Make the Adreno driver invoke the SMMU aperture setup firmware function,
which is required to allow the GPU to manage per-process page tables in
some firmware versions - as an example Rb3Gen2 has no GPU without this.
Add X1E Devkit to the list of devices that has functional EFI variable
access through the uefisecapp.
Flip the "manual slice configuration quirk" in the Qualcomm LLCC driver,
as this only applies to a single platform, and introduce support for
QCS8300, QCS615, SAR2130P, and SAR1130P.
Lastly, add IPQ5424 and IPQ5404 to the Qualcomm socinfo driver.
* tag 'qcom-drivers-for-6.13-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
soc: qcom: ice: Remove the device_link field in qcom_ice
drm/msm/adreno: Setup SMMU aparture for per-process page table
firmware: qcom: scm: Introduce CP_SMMU_APERTURE_ID
soc: qcom: socinfo: add IPQ5424/IPQ5404 SoC ID
dt-bindings: arm: qcom,ids: add SoC ID for IPQ5424/IPQ5404
soc: qcom: llcc: Flip the manual slice configuration condition
dt-bindings: firmware: qcom,scm: Document sm8750 SCM
firmware: qcom: uefisecapp: Allow X1E Devkit devices
soc: qcom: llcc: Add LLCC configuration for the QCS8300 platform
dt-bindings: cache: qcom,llcc: Document the QCS8300 LLCC
soc: qcom: llcc: Add configuration data for QCS615
dt-bindings: cache: qcom,llcc: Document the QCS615 LLCC
soc: qcom: llcc: add support for SAR2130P and SAR1130P
soc: qcom: llcc: use deciman integers for bit shift values
dt-bindings: cache: qcom,llcc: document SAR2130P and SAR1130P
Link: https://lore.kernel.org/r/20241113032425.356306-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/dt
Samsung SoC drivers for v6.13
Add Samsung ChipID driver support for new SoCs: Exynos8895, Exynos990
and Exynos9810.
* tag 'samsung-drivers-6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
soc: samsung: exynos-chipid: Add support for Exynos9810 SoC
dt-bindings: hwinfo: samsung,exynos-chipid: Add Samsung exynos9810 compatible
soc: samsung: exynos-chipid: Add support for Exynos 990 chipid
dt-bindings: hwinfo: exynos-chipid: Add compatible for Exynos 990 chipid
soc: samsung: exynos-chipid: add exynos8895 SoC support
dt-bindings: hwinfo: samsung,exynos-chipid: add exynos8895 compatible
Link: https://lore.kernel.org/r/20241029081002.21106-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/drivers
TI SoC driver updates for v6.13
- knav_qmss_queue: Cleanups around request_irq params and redundant code.
- ti_sci: Power management ops in preperation for suspend/resume capability.
Also includes dependency patch to export dev_pm_qos_read_value
(acked by Rafael).
* tag 'ti-driver-soc-for-v6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux:
firmware: ti_sci: Remove use of of_match_ptr() helper
firmware: ti_sci: add CPU latency constraint management
firmware: ti_sci: Introduce Power Management Ops
firmware: ti_sci: Add system suspend and resume call
firmware: ti_sci: Add support for querying the firmware caps
PM: QoS: Export dev_pm_qos_read_value
soc: ti: knav_qmss_queue: Drop redundant continue statement
soc: ti: knav_qmss_queue: Use IRQF_NO_AUTOEN flag in request_irq()
Link: https://lore.kernel.org/r/20241106121708.rso5wvc7wbhfi6xk@maverick
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The struct device_link *link field in struct qcom_ice is only used to
store the result of a device_link_add call with the
DL_FLAG_AUTOREMOVE_SUPPLIER flag. With this flag, the resulting value
can only be used to check whether the link is present or not, as per the
device_link_add description, hence this commit removes the field.
Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp>
Link: https://lore.kernel.org/r/20241030025046.303342-1-joe@pf.is.s.u-tokyo.ac.jp
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-6.12-rc7).
Conflicts:
drivers/net/ethernet/freescale/enetc/enetc_pf.c
e15c5506dd39 ("net: enetc: allocate vf_state during PF probes")
3774409fd4c6 ("net: enetc: build enetc_pf_common.c as a separate module")
https://lore.kernel.org/20241105114100.118bd35e@canb.auug.org.au
Adjacent changes:
drivers/net/ethernet/ti/am65-cpsw-nuss.c
de794169cf17 ("net: ethernet: ti: am65-cpsw: Fix multi queue Rx on J7")
4a7b2ba94a59 ("net: ethernet: ti: am65-cpsw: Use tstats instead of open coded version")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add SoC ID for Qualcomm IPQ5424/IPQ5404.
Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20241016151528.2893599-3-quic_mmanikan@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Commit c14e64b46944 ("soc: qcom: llcc: Support chipsets that can write
to llcc") made the code not configure certain registers on SDM845 due
to firmware security policies. That turned out only to concern SDM845,
but the condition was chosen such that all other entries (for SoCs that
didnot need it) were required to set .need_llcc_cfg = true.
Flip the condition, so the default is "doesn't need the workaround".
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241104-topic-llcc_flip-v1-1-3003c846d131@oss.qualcomm.com
[bjorn: Dropped a few newly added need_llcc_cfg uses]
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap into arm/drivers
soc: ti: driver updates for v6.13
* tag 'omap-for-v6.13/drivers-signed' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap:
thermal/ti-soc-thermal: Fix typos
soc: ti: smartreflex: Use IRQF_NO_AUTOEN flag in request_irq()
Link: https://lore.kernel.org/r/7hplnaomtt.fsf@baylibre.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux into arm/drivers
MediaTek soc driver updates for v6.13
This adds support for the MT8188 SoC in the MediaTek Regulator
Coupler driver, allowing stable GPU DVFS on this chip;
Moreover, this adds a new MediaTek DVFS Resource Collector (DVFSRC)
driver, allowing to enable other drivers (interconnect, regulator)
which can now communicate with the DVFSRC hardware.
Last but not least, this includes some cleanups for the CMDQ Helper
and MediaTek SVS drivers.
* tag 'mtk-soc-for-v6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux:
soc: mediatek: mtk-svs: Call of_node_put(np) only once in svs_get_subsys_device()
soc: mediatek: mediatek-regulator-coupler: Support mt8188
soc: mediatek: mtk-cmdq: Move cmdq_instruction init to declaration
soc: mediatek: mtk-cmdq: Move mask build and append to function
soc: mediatek: Add MediaTek DVFS Resource Collector (DVFSRC) driver
dt-bindings: soc: mediatek: Add DVFSRC bindings for MT8183 and MT8195
Link: https://lore.kernel.org/r/20241104112625.161365-2-angelogioacchino.delregno@collabora.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/drivers
i.MX drivers changes for 6.13:
- A series from Marek Vasut to probe soc-imx8m as platform driver,
so that it works properly with 'driver_async_probe' kernel parameter.
* tag 'imx-drivers-6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
soc: imx8m: Use devm_* to simplify probe failure handling
soc: imx8m: Remove global soc_uid
soc: imx8m: Probe the SoC driver as platform driver
Link: https://lore.kernel.org/r/20241104090055.1881860-1-shawnguo2@yeah.net
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/drivers
Qualcomm driver updates for v6.13
Enable QSEECOM, and thereby access to EFI variables, for Lenovo Yoga
Slim 7x, Dell XPS 13, Microsoft Surface Pro 9.
Last Level Cache Controller (LLCC) driver code is shuffled, to improve
readability of the tables.
The Qualcomm socinfo driver gains support for QCS615, QCS9100, SAR1130P,
SAR2130P, and SA8255P.
A few drivers are simplified using dev_err_probe() and guard(), and a
few kernel-doc issues are corrected.
Mentioning of the #linux-msm IRC channel is added to the MAINTAINERS
file.
* tag 'qcom-drivers-for-6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (30 commits)
soc: qcom: socinfo: add QCS9100 ID
dt-bindings: arm: qcom,ids: add SoC ID for QCS9100
dt-bindings: soc: qcom,aoss-qmp: Document the QCS8300 AOSS channel
dt-bindings: soc: qcom: add qcom,qcs8300-imem compatible
dt-bindings: firmware: qcom,scm: document SCM on QCS8300 SoCs
soc: qcom: socinfo: add support for SA8255P
dt-bindings: arm: qcom: add the SoC ID for SA8255P
soc: qcom: smp2p: Simplify code with dev_err_probe()
soc: qcom: smem: Simplify code with dev_err_probe()
soc: qcom: rpmh-rsc: Simplify code with dev_err_probe()
dt-bindings: soc: qcom: aoss-qmp: document support for SA8255p
dt-bindings: firmware: qcom,scm: document support for SA8255p
dt-bindings: soc: qcom,aoss-qmp: Add SAR2130P compatible
dt-bindings: firmware: qcom,scm: Add SAR2130P compatible
soc: qcom: socinfo: add SoC IDs for SAR1130P and SAR2130P
dt-bindings: arm: qcom,ids: add SoC ID for SAR2130P and SAR1130P
dt-bindings: soc: qcom: aoss-qmp: Add SM8750
soc: qcom: socinfo: Add QCS615 SoC ID table entry
dt-bindings: arm: qcom,ids: add SoC ID for QCS615
soc: qcom: smem: Fix up kerneldoc
...
Link: https://lore.kernel.org/r/20241102231953.871067-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
arm/drivers
arm64: ZynqMP SoC changes for 6.13
event_manager:
- cleanup error path
firmware:
- add support for new SMC layout
- fix feature check logic
- extend debug interface
- update reset ID format
- report about unsupported feature in pinctrl
* tag 'zynqmp-soc-for-6.13' of https://github.com/Xilinx/linux-xlnx:
firmware: xilinx: fix feature check logic for TF-A specific APIs
firmware: xilinx: add support for new SMC call format
firmware: xilinx: add |
