| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
[ Upstream commit f50d5e0c1f80d004510bf77cb0e1759103585c00 ]
A new version of a bona fide genuine NI-USB-HS+ adaptor
sends new response codes to the initialization sequence.
Add the checking for these response codes to suppress
console warning messages.
Signed-off-by: Dave Penkler <dpenkler@gmail.com>
Link: https://lore.kernel.org/r/20250722164810.2621-1-dpenkler@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ee4cf798202d285dcbe85e4467a094c44f5ed8e6 ]
When gmin_get_config_var() calls efi.get_variable() and the EFI variable
is larger than the expected buffer size, two behaviors combine to create
a stack buffer overflow:
1. gmin_get_config_var() does not return the proper error code when
efi.get_variable() fails. It returns the stale 'ret' value from
earlier operations instead of indicating the EFI failure.
2. When efi.get_variable() returns EFI_BUFFER_TOO_SMALL, it updates
*out_len to the required buffer size but writes no data to the output
buffer. However, due to bug #1, gmin_get_var_int() believes the call
succeeded.
The caller gmin_get_var_int() then performs:
- Allocates val[CFG_VAR_NAME_MAX + 1] (65 bytes) on stack
- Calls gmin_get_config_var(dev, is_gmin, var, val, &len) with len=64
- If EFI variable is >64 bytes, efi.get_variable() sets len=required_size
- Due to bug #1, thinks call succeeded with len=required_size
- Executes val[len] = 0, writing past end of 65-byte stack buffer
This creates a stack buffer overflow when EFI variables are larger than
64 bytes. Since EFI variables can be controlled by firmware or system
configuration, this could potentially be exploited for code execution.
Fix the bug by returning proper error codes from gmin_get_config_var()
based on EFI status instead of stale 'ret' value.
The gmin_get_var_int() function is called during device initialization
for camera sensor configuration on Intel Bay Trail and Cherry Trail
platforms using the atomisp camera stack.
Reported-by: zepta <z3ptaa@gmail.com>
Closes: https://lore.kernel.org/all/CAPBS6KoQyM7FMdPwOuXteXsOe44X4H3F8Fw+y_qWq6E+OdmxQA@mail.gmail.com
Fixes: 38d4f74bc148 ("media: atomisp_gmin_platform: stop abusing efivar API")
Reviewed-by: Hans de Goede <hansg@kernel.org>
Link: https://lore.kernel.org/r/20250724080756.work.741-kees@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a8934352ba01081c51d2df428e9d540aae0e88b5 ]
The battery manufacturer string was incorrectly null terminated using
bat_model instead of bat_manu. This could result in an unintended
write to the wrong field and potentially incorrect behavior.
fixe the issue by correctly null terminating the bat_manu string.
Fixes: 32890b983086 ("Staging: initial version of the nvec driver")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/20250719080755.3954373-1-alok.a.tiwari@oracle.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ce32eff1cf3ae8ac2596171dd0af1657634c83eb ]
gbphy_dev_match_id() should be taking a const pointer, as the pointer
passed to it from the container_of() call was const to start with (it
was accidentally cast away with the call.) Fix this all up by correctly
marking the pointer types.
Cc: Alex Elder <elder@kernel.org>
Cc: greybus-dev@lists.linaro.org
Fixes: d69d80484598 ("driver core: have match() callback in struct bus_type take a const *")
Reviewed-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/2025070115-reoccupy-showy-e2ad@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1b0ee85ee7967a4d7a68080c3f6a66af69e4e0b4 ]
If cb_gpib_config() fails, 'info' needs to be freed, as already done in the
remove function.
While at it, remove a pointless comment related to gpib_attach().
Fixes: e9dc69956d4d ("staging: gpib: Add Computer Boards GPIB driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/bf89d6f2f8b8c680720d02061fc4ebdd805deca8.1751709098.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit aa07b790d79226f9bd0731d2c065db2823867cc5 ]
When copy_from_user() fails it return number of bytes it wasn't able to
copy. So the correct return value when copy_from_user() fails is
-EFAULT.
Fixes: 9dde4559e939 ("staging: gpib: Add GPIB common core driver")
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Link: https://lore.kernel.org/r/20250703064633.1955893-1-harshit.m.mogalapalli@oracle.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit eb2cb7dab60f9be0b435ac4a674255429a36d72c ]
In the error paths after fb_info structure is successfully allocated,
the memory allocated in fb_deferred_io_init() for info->pagerefs is not
freed. Fix that by adding the cleanup function on the error path.
Fixes: c296d5f9957c ("staging: fbtft: core support")
Signed-off-by: Abdun Nihaal <abdun.nihaal@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/20250626172412.18355-1-abdun.nihaal@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f2b8ebfb867011ddbefbdf7b04ad62626cbc2afd ]
Most of the users of vchiq_shutdown ignore the return value,
which is bad because this could lead to resource leaks.
So instead of changing all calls to vchiq_shutdown, it's easier
to make vchiq_shutdown never fail.
Fixes: 71bad7f08641 ("staging: add bcm2708 vchiq driver")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://lore.kernel.org/r/20250715161108.3411-4-wahrenst@gmx.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 228af5a58524fba09ec4b7d184694db4f7fe96f5 upstream.
The commit 86bc88217006 ("staging: vchiq_arm: Create keep-alive thread
during probe") introduced a regression for certain configurations,
which doesn't have a VCHIQ user. This results in a unused and hanging
keep-alive thread:
INFO: task vchiq-keep/0:85 blocked for more than 120 seconds.
Not tainted 6.12.34-v8-+ #13
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:vchiq-keep/0 state:D stack:0 pid:85 tgid:85 ppid:2
Call trace:
__switch_to+0x188/0x230
__schedule+0xa54/0xb28
schedule+0x80/0x120
schedule_preempt_disabled+0x30/0x50
kthread+0xd4/0x1a0
ret_from_fork+0x10/0x20
Fixes: 86bc88217006 ("staging: vchiq_arm: Create keep-alive thread during probe")
Reported-by: Maíra Canal <mcanal@igalia.com>
Closes: https://lore.kernel.org/linux-staging/ba35b960-a981-4671-9f7f-060da10feaa1@usp.br/
Cc: stable@kernel.org
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Link: https://lore.kernel.org/r/20250715161108.3411-3-wahrenst@gmx.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ebe0b2ecb7b8285852414a0f20044432e37d9b4c upstream.
The commit 3e5def4249b9 ("staging: vchiq_arm: Improve initial VCHIQ connect")
based on the assumption that in good case the VCHIQ connect always happen and
therefore the keep-alive thread is guaranteed to be woken up. This is wrong,
because in certain configurations there are no VCHIQ users and so the VCHIQ
connect never happen. So revert it.
Fixes: 3e5def4249b9 ("staging: vchiq_arm: Improve initial VCHIQ connect")
Reported-by: Maíra Canal <mcanal@igalia.com>
Closes: https://lore.kernel.org/linux-staging/ba35b960-a981-4671-9f7f-060da10feaa1@usp.br/
Cc: stable@kernel.org
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Link: https://lore.kernel.org/r/20250715161108.3411-2-wahrenst@gmx.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a55bc4ffc06d8c965a7d6f0a01ed0ed41380df28 upstream.
After commit 6f110a5e4f99 ("Disable SLUB_TINY for build testing"), which
causes CONFIG_KASAN to be enabled in allmodconfig again, arm64
allmodconfig builds with older versions of clang (15 through 17) show an
instance of -Wframe-larger-than (which breaks the build with
CONFIG_WERROR=y):
drivers/staging/rtl8723bs/core/rtw_security.c:1287:5: error: stack frame size (2208) exceeds limit (2048) in 'rtw_aes_decrypt' [-Werror,-Wframe-larger-than]
1287 | u32 rtw_aes_decrypt(struct adapter *padapter, u8 *precvframe)
| ^
This comes from aes_decipher() being inlined in rtw_aes_decrypt().
Running the same build with CONFIG_FRAME_WARN=128 shows aes_cipher()
also uses a decent amount of stack, just under the limit of 2048:
drivers/staging/rtl8723bs/core/rtw_security.c:864:19: warning: stack frame size (1952) exceeds limit (128) in 'aes_cipher' [-Wframe-larger-than]
864 | static signed int aes_cipher(u8 *key, uint hdrlen,
| ^
-Rpass-analysis=stack-frame-layout only shows one large structure on the
stack, which is the ctx variable inlined from aes128k128d(). A good
number of the other variables come from the additional checks of
fortified string routines, which are present in memset(), which both
aes_cipher() and aes_decipher() use to initialize some temporary
buffers. In this case, since the size is known at compile time, these
additional checks should not result in any code generation changes but
allmodconfig has several sanitizers enabled, which may make it harder
for the compiler to eliminate the compile time checks and the variables
that come about from them.
The memset() calls are just initializing these buffers to zero, so use
'= {}' instead, which is used all over the kernel and does the exact
same thing as memset() without the fortify checks, which drops the stack
usage of these functions by a few hundred kilobytes.
drivers/staging/rtl8723bs/core/rtw_security.c:864:19: warning: stack frame size (1584) exceeds limit (128) in 'aes_cipher' [-Wframe-larger-than]
864 | static signed int aes_cipher(u8 *key, uint hdrlen,
| ^
drivers/staging/rtl8723bs/core/rtw_security.c:1271:5: warning: stack frame size (1456) exceeds limit (128) in 'rtw_aes_decrypt' [-Wframe-larger-than]
1271 | u32 rtw_aes_decrypt(struct adapter *padapter, u8 *precvframe)
| ^
Cc: stable@vger.kernel.org
Fixes: 554c0a3abf21 ("staging: Add rtl8723bs sdio wifi driver")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/20250609-rtl8723bs-fix-clang-arm64-wflt-v1-1-e2accba43def@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit d43d7db3c8a1868dcbc6cb8de90a3cdf309d6cbb ]
Setting up the control handler calls into .s_ctrl ops. While validating
the controls the ops may need to access some of the context state, which
could lead to a crash if not properly initialized.
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 60638e2a2d4bc03798f00d5ab65ce9b83cb8b03b upstream.
The AD5933 datasheet (Table 13) lists the maximum cycles to be 0x7FC
(2044).
Clamp the user input to the maximum effective value of 0x7FC cycles.
Fixes: f94aa354d676 ("iio: impedance-analyzer: New driver for AD5933/4 Impedance Converter, Network Analyzer")
Cc: stable@vger.kernel.org
Signed-off-by: Gabriel Shahrouzi <gshahrouzi@gmail.com>
Reviewed-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com>
Link: https://patch.msgid.link/20250420013009.847851-1-gshahrouzi@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 5aac95320d0f17f1098960e903ce5e087f42bc70 ]
GPIB secondary addresses have valid values between 0 and 31
inclusive. The Make Secondary Address function MSA, used to form
the protocol byte, was using the gpib_address_restrict function
erroneously restricting the address range to 0 through 30.
Remove the call to gpib_address_restrict and simply trim the
address to 5 bits.
Fixes: 2da03e7e31aa ("staging: gpib: Add user api include files")
Signed-off-by: Dave Penkler <dpenkler@gmail.com>
Link: https://lore.kernel.org/r/20250520155100.5808-1-dpenkler@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 034a456869a071c635a9997e0bf3947a6cb20b25 ]
The PCMCIA config identifier in the ines_exit_module function
was never changed because it was misspelled in the original commit.
Update the config parameter to use the correct identifier from
gpib/Kconfig
Fixes: bb1bd92fa0f2 ("staging: gpib: Add ines GPIB driver")
Signed-off-by: Dave Penkler <dpenkler@gmail.com>
Link: https://lore.kernel.org/r/20250502072150.32714-2-dpenkler@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f270005b99fa19fee9a6b4006e8dee37c10f1944 ]
The VIDIOC_ENUM_FRAMESIZES ioctl should return all frame sizes (i.e.
width and height in pixels) that the device supports for the given pixel
format.
It doesn't make a lot of sense to return the frame-sizes in a stepwise
manner, which is used to enforce hardware alignments requirements for
CAPTURE buffers, for coded formats.
Instead, applications should receive an indication, about the maximum
supported frame size for that hardware decoder, via a continuous
frame-size enumeration.
Fixes: cd33c830448b ("media: rkvdec: Add the rkvdec driver")
Suggested-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fixes from Greg KH:
"Here are three small staging driver fixes for 6.15-rc6. These are:
- bcm2835-camera driver fix
- two axis-fifo driver fixes
All of these have been in linux-next for a few weeks with no reported
issues"
* tag 'staging-6.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: axis-fifo: Remove hardware resets for user errors
staging: axis-fifo: Correct handling of tx_fifo_depth for size validation
staging: bcm2835-camera: Initialise dev in v4l2_dev
|
|
The axis-fifo driver performs a full hardware reset (via
reset_ip_core()) in several error paths within the read and write
functions. This reset flushes both TX and RX FIFOs and resets the
AXI-Stream links.
Allow the user to handle the error without causing hardware disruption
or data loss in other FIFO paths.
Fixes: 4a965c5f89de ("staging: add driver for Xilinx AXI-Stream FIFO v4.1 IP core")
Cc: stable@vger.kernel.org
Signed-off-by: Gabriel Shahrouzi <gshahrouzi@gmail.com>
Link: https://lore.kernel.org/r/20250419004306.669605-1-gshahrouzi@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove erroneous subtraction of 4 from the total FIFO depth read from
device tree. The stored depth is for checking against total capacity,
not initial vacancy. This prevented writes near the FIFO's full size.
The check performed just before data transfer, which uses live reads of
the TDFV register to determine current vacancy, correctly handles the
initial Depth - 4 hardware state and subsequent FIFO fullness.
Fixes: 4a965c5f89de ("staging: add driver for Xilinx AXI-Stream FIFO v4.1 IP core")
Cc: stable@vger.kernel.org
Signed-off-by: Gabriel Shahrouzi <gshahrouzi@gmail.com>
Link: https://lore.kernel.org/r/20250419012937.674924-1-gshahrouzi@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Commit 42a2f6664e18 ("staging: vc04_services: Move global g_state to
vchiq_state") changed mmal_init to pass dev->v4l2_dev.dev to
vchiq_mmal_init, however nothing iniitialised dev->v4l2_dev, so we got
a NULL pointer dereference.
Set dev->v4l2_dev.dev during bcm2835_mmal_probe. The device pointer
could be passed into v4l2_device_register to set it, however that also
has other effects that would need additional changes.
Fixes: 42a2f6664e18 ("staging: vc04_services: Move global g_state to vchiq_state")
Cc: stable@vger.kernel.org
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://lore.kernel.org/r/20250423-staging-bcm2835-v4l2-fix-v2-1-3227f0ba4700@raspberrypi.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The mode setting logic in ad7816_store_mode was reversed due to
incorrect handling of the strcmp return value. strcmp returns 0 on
match, so the `if (strcmp(buf, "full"))` block executed when the
input was not "full".
This resulted in "full" setting the mode to AD7816_PD (power-down) and
other inputs setting it to AD7816_FULL.
Fix this by checking it against 0 to correctly check for "full" and
"power-down", mapping them to AD7816_FULL and AD7816_PD respectively.
Fixes: 7924425db04a ("staging: iio: adc: new driver for AD7816 devices")
Cc: stable@vger.kernel.org
Signed-off-by: Gabriel Shahrouzi <gshahrouzi@gmail.com>
Acked-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/stable/20250414152920.467505-1-gshahrouzi%40gmail.com
Link: https://patch.msgid.link/20250414154050.469482-1-gshahrouzi@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree
over and remove the historical wrapper inlines.
Conversion was done with coccinelle plus manual fixups where necessary.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver updates from Greg KH:
"Here is the big set of serial and tty driver updates for 6.15-rc1.
Include in here are the following:
- more great tty layer cleanups from Jiri. Someday this will be done,
but that's not going to be any year soon...
- kdb debug driver reverts to fix a reported issue
- lots of .dts binding updates for different devices with serial
devices
- lots of tiny updates and tweaks and a few bugfixes for different
serial drivers.
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (79 commits)
tty: serial: fsl_lpuart: Fix unused variable 'sport' build warning
serial: stm32: do not deassert RS485 RTS GPIO prematurely
serial: 8250: add driver for NI UARTs
dt-bindings: serial: snps-dw-apb-uart: document RZ/N1 binding without DMA
serial: icom: fix code format problems
serial: sh-sci: Save and restore more registers
tty: serial: pl011: remove incorrect of_match_ptr annotation
dt-bindings: serial: snps-dw-apb-uart: Add support for rk3562
tty: serial: lpuart: only disable CTS instead of overwriting the whole UARTMODIR register
tty: caif: removed unused function debugfs_tx()
serial: 8250_dma: terminate correct DMA in tx_dma_flush()
tty: serial: fsl_lpuart: rename register variables more specifically
tty: serial: fsl_lpuart: use port struct directly to simply code
tty: serial: fsl_lpuart: Use u32 and u8 for register variables
tty: serial: fsl_lpuart: disable transmitter before changing RS485 related registers
tty: serial: 8250: Add Brainboxes XC devices
dt-bindings: serial: fsl-lpuart: support i.MX94
tty: serial: 8250: Add some more device IDs
dt-bindings: serial: samsung: add exynos7870-uart compatible
serial: 8250_dw: Comment possible corner cases in serial_out() implementation
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver updates from Greg KH:
"Here is the big set of staging driver cleanups and updates for
6.15-rc1.
As expected, with the introduction of the gpib drivers, loads of
cleanups and fixes showed up, with the huge majority of changes being
for that chunk of drivers. This is good and shows that the community
can fix up things in public when asked to. Also included in here are:
- small sm750fb cleanups
- tiny rtl8723bs cleanups
- more vchiq_arm cleanups and changes, hopefully this will get out of
staging soon
All of these have been in linux-next for almost 2 weeks now with no
reported issues"
* tag 'staging-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (76 commits)
staging: rtl8723bs: fixed a unnecessary parentheses coding style issue
staging: vchiq_arm: Improve initial VCHIQ connect
staging: vchiq_arm: Create keep-alive thread during probe
staging: vchiq_arm: Stop kthreads if vchiq cdev register fails
staging: vchiq_arm: Fix possible NPR of keep-alive thread
staging: vchiq_arm: Register debugfs after cdev
staging: vchiq_arm: Don't use %pK through printk
staging: rtl8723bs: select CONFIG_CRYPTO_LIB_AES
staging: rtl8723bs: Remove some unused functions, macros, and structs
staging: gpib: change return type of t1_delay function to report errors
staging: gpib: remove commented-out lines
staging: gpib: fix kernel-doc section for usb_gpib_line_status() function
staging: gpib: fix kernel-doc section for function usb_gpib_interface_clear()
staging: gpib: fix kernel-doc section for write_loop() function
staging: gpib: Removing typedef for gpib_board
staging: gpib: struct typing for gpib_gboard_t
staging: gpib: tnt4882: struct gpib_board
staging: gpib: tms9914: struct gpib_board
staging: gpib: pc2: struct gpib_board
staging: gpib: ni_usb_gpib: struct gpib_board
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc / IIO driver updates from Greg KH:
"Here is the big set of char, misc, iio, and other smaller driver
subsystems for 6.15-rc1. Lots of stuff in here, including:
- loads of IIO changes and driver updates
- counter driver updates
- w1 driver updates
- faux conversions for some drivers that were abusing the platform
bus interface
- coresight driver updates
- rust miscdevice binding updates based on real-world-use
- other minor driver updates
All of these have been in linux-next with no reported issues for quite
a while"
* tag 'char-misc-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (292 commits)
samples: rust_misc_device: fix markup in top-level docs
Coresight: Fix a NULL vs IS_ERR() bug in probe
misc: lis3lv02d: convert to use faux_device
tlclk: convert to use faux_device
regulator: dummy: convert to use the faux device interface
bus: mhi: host: Fix race between unprepare and queue_buf
coresight: configfs: Constify struct config_item_type
doc: iio: ad7380: describe offload support
iio: ad7380: add support for SPI offload
iio: light: Add check for array bounds in veml6075_read_int_time_ms
iio: adc: ti-ads7924 Drop unnecessary function parameters
staging: iio: ad9834: Use devm_regulator_get_enable()
staging: iio: ad9832: Use devm_regulator_get_enable()
iio: gyro: bmg160_spi: add of_match_table
dt-bindings: iio: adc: Add i.MX94 and i.MX95 support
iio: adc: ad7768-1: remove unnecessary locking
Documentation: ABI: add wideband filter type to sysfs-bus-iio
iio: adc: ad7768-1: set MOSI idle state to prevent accidental reset
iio: adc: ad7768-1: Fix conversion result sign
iio: adc: ad7124: Benefit of dev = indio_dev->dev.parent in ad7124_parse_channel_config()
...
|
|
Pull drm updates from Dave Airlie:
"Outside of drm there are some rust patches from Danilo who maintains
that area in here, and some pieces for drm header check tests.
The major things in here are a new driver supporting the touchbar
displays on M1/M2, the nova-core stub driver which is just the vehicle
for adding rust abstractions and start developing a real driver inside
of.
xe adds support for SVM with a non-driver specific SVM core
abstraction that will hopefully be useful for other drivers, along
with support for shrinking for TTM devices. I'm sure xe and AMD
support new devices, but the pipeline depth on these things is hard to
know what they end up being in the marketplace!
uapi:
- add mediatek tiled fourcc
- add support for notifying userspace on device wedged
new driver:
- appletbdrm: support for Apple Touchbar displays on m1/m2
- nova-core: skeleton rust driver to develop nova inside off
firmware:
- add some rust firmware pieces
rust:
- add 'LocalModule' type alias
component:
- add helper to query bound status
fbdev:
- fbtft: remove access to page->index
media:
- cec: tda998x: import driver from drm
dma-buf:
- add fast path for single fence merging
tests:
- fix lockdep warnings
atomic:
- allow full modeset on connector changes
- clarify semantics of allow_modeset and drm_atomic_helper_check
- async-flip: support on arbitary planes
- writeback: fix UAF
- Document atomic-state history
format-helper:
- support ARGB8888 to ARGB4444 conversions
buddy:
- fix multi-root cleanup
ci:
- update IGT
dp:
- support extended wake timeout
- mst: fix RAD to string conversion
- increase DPCD eDP control CAP size to 5 bytes
- add DPCD eDP v1.5 definition
- add helpers for LTTPR transparent mode
panic:
- encode QR code according to Fido 2.2
scheduler:
- add parameter struct for init
- improve job peek/pop operations
- optimise drm_sched_job struct layout
ttm:
- refactor pool allocation
- add helpers for TTM shrinker
panel-orientation:
- add a bunch of new quirks
panel:
- convert panels to multi-style functions
- edp: Add support for B140UAN04.4, BOE NV140FHM-NZ, CSW MNB601LS1-3,
LG LP079QX1-SP0V, MNE007QS3-7, STA 116QHD024002, Starry
116KHD024006, Lenovo T14s Gen6 Snapdragon
- himax-hx83102: Add support for CSOT PNA957QT1-1, Kingdisplay
kd110n11-51ie, Starry 2082109qfh040022-50e
- visionox-r66451: use multi-style MIPI-DSI functions
- raydium-rm67200: Add driver for Raydium RM67200
- simple: Add support for BOE AV123Z7M-N17, BOE AV123Z7M-N17
- sony-td4353-jdi: Use MIPI-DSI multi-func interface
- summit: Add driver for Apple Summit display panel
- visionox-rm692e5: Add driver for Visionox RM692E5
bridge:
- pass full atomic state to various callbacks
- adv7511: Report correct capabilities
- it6505: Fix HDCP V compare
- snd65dsi86: fix device IDs
- nwl-dsi: set bridge type
- ti-sn65si83: add error recovery and set bridge type
- synopsys: add HDMI audio support
xe:
- support device-wedged event
- add mmap support for PCI memory barrier
- perf pmu integration and expose per-engien activity
- add EU stall sampling support
- GPU SVM and Xe SVM implementation
- use TTM shrinker
- add survivability mode to allow the driver to do firmware updates
in critical failure states
- PXP HWDRM support for MTL and LNL
- expose package/vram temps over hwmon
- enable DP tunneling
- drop mmio_ext abstraction
- Reject BO evcition if BO is bound to current VM
- Xe suballocator improvements
- re-use display vmas when possible
- add GuC Buffer Cache abstraction
- PCI ID update for Panther Lake and Battlemage
- Enable SRIOV for Panther Lake
- Refactor VRAM manager location
i915:
- enable extends wake timeout
- support device-wedged event
- Enable DP 128b/132b SST DSC
- FBC dirty rectangle support for display version 30+
- convert i915/xe to drm client setup
- Compute HDMI PLLS for rates not in fixed tables
- Allow DSB usage when PSR is enabled on LNL+
- Enable panel replay without full modeset
- Enable async flips with compressed buffers on ICL+
- support luminance based brightness via DPCD for eDP
- enable VRR enable/disable without full modeset
- allow GuC SLPC default strategies on MTL+ for performance
- lots of display refactoring in move to struct intel_display
amdgpu:
- add device wedged event
- support async page flips on overlay planes
- enable broadcast RGB drm property
- add info ioctl for virt mode
- OEM i2c support for RGB lights
- GC 11.5.2 + 11.5.3 support
- SDMA 6.1.3 support
- NBIO 7.9.1 + 7.11.2 support
- MMHUB 1.8.1 + 3.3.2 support
- DCN 3.6.0 support
- Add dynamic workload profile switching for GC 10-12
- support larger VBIOS sizes
- Mark gttsize parameters as deprecated
- Initial JPEG queue resset support
amdkfd:
- add KFD per process flags for setting precision
- sync pasid values between KGD and KFD
- improve GTT/VRAM handling for APUs
- fix user queue validation on GC7/8
- SDMA queue reset support
raedeon:
- rs400 hyperz fix
i2c:
- td998x: drop platform_data, split driver into media and bridge
ast:
- transmitter chip detection refactoring
- vbios display mode refactoring
- astdp: fix connection status and filter unsupported modes
- cursor handling refactoring
imagination:
- check job dependencies with sched helper
ivpu:
- improve command queue handling
- use workqueue for IRQ handling
- add support HW fault injection
- locking fixes
mgag200:
- add support for G200eH5
msm:
- dpu: add concurrent writeback support for DPU 10.x+
- use LTTPR helpers
- GPU:
- Fix obscure GMU suspend failure
- Expose syncobj timeline support
- Extend GPU devcoredump with pagetable info
- a623 support
- Fix a6xx gen1/gen2 indexed-register blocks in gpu snapshot /
devcoredump
- Display:
- Add cpu-cfg interconnect paths on SM8560 and SM8650
- Introduce KMS OMMU fault handler, causing devcoredump snapshot
- Fixed error pointer dereference in msm_kms_init_aspace()
- DPU:
- Fix mode_changing handling
- Add writeback support on SM6150 (QCS615)
- Fix DSC programming in 1:1:1 topology
- Reworked hardware resource allocation, moving it to the CRTC code
- Enabled support for Concurrent WriteBack (CWB) on SM8650
- Enabled CDM blocks on all relevant platforms
- Reworked debugfs interface for BW/clocks debugging
- Clear perf params before calculating bw
- Support YUV formats on writeback
- Fixed double inclusion
- Fixed writeback in YUV formats when using cloned output, Dropped
wb2_formats_rgb
- Corrected dpu_crtc_check_mode_changed and struct dpu_encoder_virt
kerneldocs
- Fixed uninitialized variable in dpu_crtc_kickoff_clone_mode()
- DSI:
- DSC-related fixes
- Rework clock programming
- DSI PHY:
- Fix 7nm (and lower) PHY programming
- Add proper DT schema definitions for DSI PHY clocks
- HDMI:
- Rework the driver, enabling the use of the HDMI Connector
framework
- Bindings:
- Added eDP PHY on SA8775P
nouveau:
- move drm_slave_encoder interface into driver
- nvkm: refactor GSP RPC
- use LTTPR helpers
mediatek:
- HDMI fixup and refinement
- add MT8188 dsc compatible
- MT8365 SoC support
panthor:
- Expose sizes of intenral BOs via fdinfo
- Fix race between reset and suspend
- Improve locking
qaic:
- Add support for AIC200
renesas:
- Fix limits in DT bindings
rockchip:
- support rk3562-mali
- rk3576: Add HDMI support
- vop2: Add new display modes on RK3588 HDMI0 up to 4K
- Don't change HDMI reference clock rate
- Fix DT bindings
- analogix_dp: add eDP support
- fix shutodnw
solomon:
- Set SPI device table to silence warnings
- Fix pixel and scanline encoding
v3d:
- handle clock
vc4:
- Use drm_exec
- Use dma-resv for wait-BO ioctl
- Remove seqno infrastructure
virtgpu:
- Support partial mappings of GEM objects
- Reserve VGA resources during initialization
- Fix UAF in virtgpu_dma_buf_free_obj()
- Add panic support
vkms:
- Switch to a managed modesetting pipeline
- Add support for ARGB8888
- fix UAf
xlnx:
- Set correct DMA segment size
- use mutex guards
- Fix error handling
- Fix docs"
* tag 'drm-next-2025-03-28' of https://gitlab.freedesktop.org/drm/kernel: (1762 commits)
drm/amd/pm: Update feature list for smu_v13_0_6
drm/amdgpu: Add parameter documentation for amdgpu_sync_fence
drm/amdgpu/discovery: optionally use fw based ip discovery
drm/amdgpu/discovery: use specific ip_discovery.bin for legacy asics
drm/amdgpu/discovery: check ip_discovery fw file available
drm/amd/pm: Remove unnecessay UQ10 to UINT conversion
drm/amd/pm: Remove unnecessay UQ10 to UINT conversion
drm/amdgpu/sdma_v4_4_2: update VM flush implementation for SDMA
drm/amdgpu: Optimize VM invalidation engine allocation and synchronize GPU TLB flush
drm/amd/amdgpu: Increase max rings to enable SDMA page ring
drm/amdgpu: Decode deferred error type in gfx aca bank parser
drm/amdgpu/gfx11: Add Cleaner Shader Support for GFX11.5 GPUs
drm/amdgpu/mes: clean up SDMA HQD loop
drm/amdgpu/mes: enable compute pipes across all MEC
drm/amdgpu/mes: drop MES 10.x leftovers
drm/amdgpu/mes: optimize compute loop handling
drm/amdgpu/sdma: guilty tracking is per instance
drm/amdgpu/sdma: fix engine reset handling
drm/amdgpu: remove invalid usage of sched.ready
drm/amdgpu: add cleaner shader trace point
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- platform: synopsys: hdmirx: Fix 64-bit division for 32-bit targets
- vim2m: print device name after registering device
- Synopsys DesignWare HDMI RX Driver and various fixes
- cec/printk fixes and the removal of the vidioc_g/s_ctrl and
vidioc_queryctrl callbacks
- AVerMedia H789-C PCIe support and rc-core structs padding
- Several camera sensor patches
- uvcvideo improvements
- visl: Fix ERANGE error when setting enum controls
- codec fixes
- V4L2 camera sensor patches mostly
- chips-media: wave5: Fixes
- Add SDM670 camera subsystem
- Qualcomm iris video decoder driver
- dt-bindings: update clocks for sc7280-camss
- various fixes and enhancements
* tag 'media/v6.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (264 commits)
media: pci: mgb4: include linux/errno.h
media: synopsys: hdmirx: Fix signedness bug in hdmirx_parse_dt()
media: platform: synopsys: hdmirx: Fix 64-bit division for 32-bit targets
media: vim2m: print device name after registering device
media: vivid: Introduce VIDEO_VIVID_OSD
media: vivid: Move all fb_info references into vivid-osd
media: platform: synopsys: hdmirx: Optimize struct snps_hdmirx_dev
media: platform: synopsys: hdmirx: Remove unused HDMI audio CODEC relics
media: platform: synopsys: hdmirx: Remove duplicated header inclusion
media: qcom: Clean up Kconfig dependencies
media: dvb-frontends: tda10048: Make the range of z explicit.
media: platform: stm32: Add check for clk_enable()
media: xilinx-tpg: fix double put in xtpg_parse_of()
media: siano: Fix error handling in smsdvb_module_init()
media: c8sectpfe: Call of_node_put(i2c_bus) only once in c8sectpfe_probe()
media: i2c: tda1997x: Call of_node_put(ep) only once in tda1997x_parse_dt()
dt-bindings: media: mediatek,vcodec: Revise description
dt-bindings: media: mediatek,jpeg: Relax IOMMU max item count
media: v4l2-dv-timings: prevent possible overflow in v4l2_detect_gtf()
media: rockchip: rga: fix rga offset lookup
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull core x86 updates from Ingo Molnar:
"x86 CPU features support:
- Generate the <asm/cpufeaturemasks.h> header based on build config
(H. Peter Anvin, Xin Li)
- x86 CPUID parsing updates and fixes (Ahmed S. Darwish)
- Introduce the 'setcpuid=' boot parameter (Brendan Jackman)
- Enable modifying CPU bug flags with '{clear,set}puid=' (Brendan
Jackman)
- Utilize CPU-type for CPU matching (Pawan Gupta)
- Warn about unmet CPU feature dependencies (Sohil Mehta)
- Prepare for new Intel Family numbers (Sohil Mehta)
Percpu code:
- Standardize & reorganize the x86 percpu layout and related cleanups
(Brian Gerst)
- Convert the stackprotector canary to a regular percpu variable
(Brian Gerst)
- Add a percpu subsection for cache hot data (Brian Gerst)
- Unify __pcpu_op{1,2}_N() macros to __pcpu_op_N() (Uros Bizjak)
- Construct __percpu_seg_override from __percpu_seg (Uros Bizjak)
MM:
- Add support for broadcast TLB invalidation using AMD's INVLPGB
instruction (Rik van Riel)
- Rework ROX cache to avoid writable copy (Mike Rapoport)
- PAT: restore large ROX pages after fragmentation (Kirill A.
Shutemov, Mike Rapoport)
- Make memremap(MEMREMAP_WB) map memory as encrypted by default
(Kirill A. Shutemov)
- Robustify page table initialization (Kirill A. Shutemov)
- Fix flush_tlb_range() when used for zapping normal PMDs (Jann Horn)
- Clear _PAGE_DIRTY for kernel mappings when we clear _PAGE_RW
(Matthew Wilcox)
KASLR:
- x86/kaslr: Reduce KASLR entropy on most x86 systems, to support PCI
BAR space beyond the 10TiB region (CONFIG_PCI_P2PDMA=y) (Balbir
Singh)
CPU bugs:
- Implement FineIBT-BHI mitigation (Peter Zijlstra)
- speculation: Simplify and make CALL_NOSPEC consistent (Pawan Gupta)
- speculation: Add a conditional CS prefix to CALL_NOSPEC (Pawan
Gupta)
- RFDS: Exclude P-only parts from the RFDS affected list (Pawan
Gupta)
System calls:
- Break up entry/common.c (Brian Gerst)
- Move sysctls into arch/x86 (Joel Granados)
Intel LAM support updates: (Maciej Wieczor-Retman)
- selftests/lam: Move cpu_has_la57() to use cpuinfo flag
- selftests/lam: Skip test if LAM is disabled
- selftests/lam: Test get_user() LAM pointer handling
AMD SMN access updates:
- Add SMN offsets to exclusive region access (Mario Limonciello)
- Add support for debugfs access to SMN registers (Mario Limonciello)
- Have HSMP use SMN through AMD_NODE (Yazen Ghannam)
Power management updates: (Patryk Wlazlyn)
- Allow calling mwait_play_dead with an arbitrary hint
- ACPI/processor_idle: Add FFH state handling
- intel_idle: Provide the default enter_dead() handler
- Eliminate mwait_play_dead_cpuid_hint()
Build system:
- Raise the minimum GCC version to 8.1 (Brian Gerst)
- Raise the minimum LLVM version to 15.0.0 (Nathan Chancellor)
Kconfig: (Arnd Bergmann)
- Add cmpxchg8b support back to Geode CPUs
- Drop 32-bit "bigsmp" machine support
- Rework CONFIG_GENERIC_CPU compiler flags
- Drop configuration options for early 64-bit CPUs
- Remove CONFIG_HIGHMEM64G support
- Drop CONFIG_SWIOTLB for PAE
- Drop support for CONFIG_HIGHPTE
- Document CONFIG_X86_INTEL_MID as 64-bit-only
- Remove old STA2x11 support
- Only allow CONFIG_EISA for 32-bit
Headers:
- Replace __ASSEMBLY__ with __ASSEMBLER__ in UAPI and non-UAPI
headers (Thomas Huth)
Assembly code & machine code patching:
- x86/alternatives: Simplify alternative_call() interface (Josh
Poimboeuf)
- x86/alternatives: Simplify callthunk patching (Peter Zijlstra)
- KVM: VMX: Use named operands in inline asm (Josh Poimboeuf)
- x86/hyperv: Use named operands in inline asm (Josh Poimboeuf)
- x86/traps: Cleanup and robustify decode_bug() (Peter Zijlstra)
- x86/kexec: Merge x86_32 and x86_64 code using macros from
<asm/asm.h> (Uros Bizjak)
- Use named operands in inline asm (Uros Bizjak)
- Improve performance by using asm_inline() for atomic locking
instructions (Uros Bizjak)
Earlyprintk:
- Harden early_serial (Peter Zijlstra)
NMI handler:
- Add an emergency handler in nmi_desc & use it in
nmi_shootdown_cpus() (Waiman Long)
Miscellaneous fixes and cleanups:
- by Ahmed S. Darwish, Andy Shevchenko, Ard Biesheuvel, Artem
Bityutskiy, Borislav Petkov, Brendan Jackman, Brian Gerst, Dan
Carpenter, Dr. David Alan Gilbert, H. Peter Anvin, Ingo Molnar,
Josh Poimboeuf, Kevin Brodsky, Mike Rapoport, Lukas Bulwahn, Maciej
Wieczor-Retman, Max Grobecker, Patryk Wlazlyn, Pawan Gupta, Peter
Zijlstra, Philip Redkin, Qasim Ijaz, Rik van Riel, Thomas Gleixner,
Thorsten Blum, Tom Lendacky, Tony Luck, Uros Bizjak, Vitaly
Kuznetsov, Xin Li, liuye"
* tag 'x86-core-2025-03-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (211 commits)
zstd: Increase DYNAMIC_BMI2 GCC version cutoff from 4.8 to 11.0 to work around compiler segfault
x86/asm: Make asm export of __ref_stack_chk_guard unconditional
x86/mm: Only do broadcast flush from reclaim if pages were unmapped
perf/x86/intel, x86/cpu: Replace Pentium 4 model checks with VFM ones
perf/x86/intel, x86/cpu: Simplify Intel PMU initialization
x86/headers: Replace __ASSEMBLY__ with __ASSEMBLER__ in non-UAPI headers
x86/headers: Replace __ASSEMBLY__ with __ASSEMBLER__ in UAPI headers
x86/locking/atomic: Improve performance by using asm_inline() for atomic locking instructions
x86/asm: Use asm_inline() instead of asm() in clwb()
x86/asm: Use CLFLUSHOPT and CLWB mnemonics in <asm/special_insns.h>
x86/hweight: Use asm_inline() instead of asm()
x86/hweight: Use ASM_CALL_CONSTRAINT in inline asm()
x86/hweight: Use named operands in inline asm()
x86/stackprotector/64: Only export __ref_stack_chk_guard on CONFIG_SMP
x86/head/64: Avoid Clang < 17 stack protector in startup code
x86/kexec: Merge x86_32 and x86_64 code using macros from <asm/asm.h>
x86/runtime-const: Add the RUNTIME_CONST_PTR assembly macro
x86/cpu/intel: Limit the non-architectural constant_tsc model checks
x86/mm/pat: Replace Intel x86_model checks with VFM ones
x86/cpu/intel: Fix fast string initialization for extended Families
...
|
|
tty_alloc_driver() is supposed to receive tty driver flags.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Acked-by: Johan Hovold <johan@kernel.org>
Cc: David Lin <dtwlin@gmail.com>
Cc: Alex Elder <elder@kernel.org>
Cc: greybus-dev@lists.linaro.org
Cc: linux-staging@lists.linux.dev
Reviewed-by: Alex Elder <elder@riscstar.com>
Link: https://lore.kernel.org/r/20250317070046.24386-23-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove unnecessary parentheses around derefrened pointers in
core/rtw_ap.c to adapter to the Linux kernel coding style.
Reported by checkpatch:
CHECK: Unnecessary parentheses around x->y
Signed-off-by: David Zalman <davidzalman.101@gmail.com>
Link: https://lore.kernel.org/r/20250319111012.1588-1-davidzalman.101@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The code to start the keep-alive thread on initial VCHIQ connect
within vchiq_platform_conn_state_changed is unnecessary complex.
Move the keep-alive thread wake-up into a separate function and call it
during VCHIQ connect.
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://lore.kernel.org/r/20250309125014.37166-6-wahrenst@gmx.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Creating the keep-alive thread in vchiq_platform_init_state have
the following advantages:
- abort driver probe if kthread_create fails (more consistent behavior)
- make resource release process easier
Since vchiq_keepalive_thread_func is defined below
vchiq_platform_init_state, the latter must be moved.
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://lore.kernel.org/r/20250309125014.37166-5-wahrenst@gmx.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In case the vchiq character device cannot be registered during probe,
all kthreads needs to be stopped to avoid resource leaks.
Fixes: 863a756aaf49 ("staging: vc04_services: vchiq_core: Stop kthreads on vchiq module unload")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://lore.kernel.org/r/20250309125014.37166-4-wahrenst@gmx.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In case vchiq_platform_conn_state_changed() is never called or f |
