| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
commit 17956b53ebff6a490baf580a836cbd3eae94892b upstream.
This loop is supposed to loop until if reads something other than
CS_IDST or until it times out after 30,000 attempts. But because of
the || vs && bug, it will never time out and instead it will loop a
minimum of 30,000 times.
This bug is quite old but the code is only used in USB_DEVICE_TEST_MODE
so it probably doesn't affect regular usage.
Fixes: 96fe53ef5498 ("usb: gadget: r8a66597-udc: add support for TEST_MODE")
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Acked-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20210906094221.GA10957@kili
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit bcacbf06c891374e7fdd7b72d11cda03b0269b43 ]
Currently the composite driver encodes the MaxPower field of
the configuration descriptor by reading the c->MaxPower of the
usb_configuration only if it is non-zero, otherwise it falls back
to using the value hard-coded in CONFIG_USB_GADGET_VBUS_DRAW.
However, there are cases when a configuration must explicitly set
bMaxPower to 0, particularly if its bmAttributes also has the
Self-Powered bit set, which is a valid combination.
This is specifically called out in the USB PD specification section
9.1, in which a PDUSB device "shall report zero in the bMaxPower
field after negotiating a mutually agreeable Contract", and also
verified by the USB Type-C Functional Test TD.4.10.2 Sink Power
Precedence Test.
The fix allows the c->MaxPower to be used for encoding the bMaxPower
even if it is 0, if the self-powered bit is also set. An example
usage of this would be for a ConfigFS gadget to be dynamically
updated by userspace when the Type-C connection is determined to be
operating in Power Delivery mode.
Co-developed-by: Ronak Vijay Raheja <rraheja@codeaurora.org>
Acked-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Ronak Vijay Raheja <rraheja@codeaurora.org>
Signed-off-by: Jack Pham <jackp@codeaurora.org>
Link: https://lore.kernel.org/r/20210720080907.30292-1-jackp@codeaurora.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8ae01239609b29ec2eff55967c8e0fe3650cfa09 ]
f_ncm tx timeout can call us with null skb to flush
a pending frame. In this case skb is NULL to begin
with but ceases to be null after dev->wrap() completes.
In such a case in->maxpacket will be read, even though
we've failed to check that 'in' is not NULL.
Though I've never observed this fail in practice,
however the 'flush operation' simply does not make sense with
a null usb IN endpoint - there's nowhere to flush to...
(note that we're the gadget/device, and IN is from the point
of view of the host, so here IN actually means outbound...)
Cc: Brooke Basile <brookebasile@gmail.com>
Cc: "Bryan O'Donoghue" <bryan.odonoghue@linaro.org>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Link: https://lore.kernel.org/r/20210701114834.884597-6-zenczykowski@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6f15a2a09cecb7a2faba4a75bbd101f6f962294b ]
If an error occurs after a successful 'clk_prepare_enable()' call, it must
be undone by a corresponding 'clk_disable_unprepare()' call.
This call is already present in the remove function.
Add this call in the error handling path and reorder the code so that the
'clk_prepare_enable()' call happens later in the function.
The goal is to have as much managed resources functions as possible
before the 'clk_prepare_enable()' call in order to keep the error handling
path simple.
While at it, remove the now unneeded 'clk' variable.
Fixes: c87dca047849 ("usb: bdc: Add clock enable for new chips with a separate BDC clock")
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/f8a4a6897deb0c8cb2e576580790303550f15fcd.1629314734.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
config is available
[ Upstream commit d2f42e09393c774ab79088d8e3afcc62b3328fc9 ]
If no suitable DMA configuration is available, a previous 'bdc_phy_init()'
call must be undone by a corresponding 'bdc_phy_exit()' call.
Branch to the existing error handling path instead of returning
directly.
Fixes: cc29d4f67757 ("usb: bdc: Add support for USB phy")
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/0c5910979f39225d5d8fe68c9ab1c147c68ddee1.1629314734.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2af0c5ffadaf9d13eca28409d4238b4e672942d3 ]
If IRQ occurs between calling request_irq() and mv_u3d_eps_init(),
then null pointer dereference occurs since u3d->eps[] wasn't
initialized yet but used in mv_u3d_nuke().
The patch puts registration of the interrupt handler after
initializing of neccesery data.
Found by Linux Driver Verification project (linuxtesting.org).
Fixes: 90fccb529d24 ("usb: gadget: Gadget directory cleanup - group UDC drivers")
Acked-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Nadezda Lutovinova <lutovinova@ispras.ru>
Link: https://lore.kernel.org/r/20210818141247.4794-1-lutovinova@ispras.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit cea45a3bd2dd4d9c35581328f571afd32b3c9f48 ]
soc_device_match() is intended as a last resort, to handle e.g. quirks
that cannot be handled by matching based on a compatible value.
As the device nodes for the Renesas USB 3.0 Peripheral Controller on
R-Car E3 and RZ/G2E do have SoC-specific compatible values, the latter
can and should be used to match against these devices.
This also fixes support for the USB 3.0 Peripheral Controller on the
R-Car E3e (R8A779M6) SoC, which is a different grading of the R-Car E3
(R8A77990) SoC, using the same SoC-specific compatible value.
Fixes: 30025efa8b5e75f5 ("usb: gadget: udc: renesas_usb3: add support for r8a77990")
Fixes: 546970fdab1da5fe ("usb: gadget: udc: renesas_usb3: add support for r8a774c0")
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/760981fb4cd110d7cbfc9dcffa365e7c8b25c6e5.1628696960.git.geert+renesas@glider.be
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ecff88e819e31081d41cd05bb199b9bd10e13e90 ]
The driver neglects to check the result of platform_get_irq()'s call and
blithely passes the negative error codes to request_irq() (which takes
*unsigned* IRQ #), causing it to fail with -EINVAL, overriding an original
error code. Stop calling request_irq() with the invalid IRQ #s.
Fixes: 188db4435ac6 ("usb: gadget: s3c: use platform resources")
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Acked-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://lore.kernel.org/r/bd69b22c-b484-5a1f-c798-78d4b78405f2@omp.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 50855c31573b02963f0aa2aacfd4ea41c31ae0e0 ]
The driver neglects to check the result of platform_get_irq()'s call and
blithely passes the negative error codes to devm_request_irq() (which takes
*unsigned* IRQ #), causing it to fail with -EINVAL, overriding an original
error code. Stop calling devm_request_irq() with the invalid IRQ #s.
Fixes: 8b2e76687b39 ("USB: AT91 UDC updates, mostly power management")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Acked-by: Felipe Balbi <balbi@kernel.org>
Link: https://lore.kernel.org/r/6654a224-739a-1a80-12f0-76d920f87b6c@omp.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit eeb0cfb6b2b6b731902e68af641e30bd31be3c7b upstream.
usb_endpoint_maxp() only returns the bit[10:0] of wMaxPacketSize
of endpoint descriptor, not includes bit[12:11] anymore, so use
usb_endpoint_maxp_mult() instead.
Meanwhile no need AND 0x7ff when get maxp, remove it.
Fixes: 49db427232fe ("usb: gadget: Add UDC driver for tegra XUSB device mode controller")
Cc: stable@vger.kernel.org
Acked-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/1628836253-7432-5-git-send-email-chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 068fdad20454f815e61e6f6eb9f051a8b3120e88 ]
If the endpoint completion callback is call right after the ep_enabled flag
is cleared and before usb_ep_dequeue() is call, we could do a double free
on the request and the associated buffer.
Fix this by clearing ep_enabled after all the endpoint requests have been
dequeued.
Fixes: 7de8681be2cd ("usb: gadget: u_audio: Free requests only after callback")
Cc: stable <stable@vger.kernel.org>
Reported-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20210827092927.366482-1-jbrunet@baylibre.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit fa20bada3f934e3b3e4af4c77e5b518cd5a282e5 upstream.
SET_IDLE value must be shifted 8 bits to the right to get duration.
This confirmed by USBCV test.
Fixes: afcff6dc690e ("usb: gadget: f_hid: added GET_IDLE and SET_IDLE handlers")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Maxim Devaev <mdevaev@gmail.com>
Link: https://lore.kernel.org/r/20210727185800.43796-1-mdevaev@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2867652e4766360adf14dfda3832455e04964f2a upstream.
Disconnecting and reconnecting the USB cable can lead to crashes
and a variety of kernel log spam.
The problem was found and reproduced on the Raspberry Pi [1]
and the original fix was created in Raspberry's own fork [2].
Link: https://github.com/raspberrypi/linux/issues/3870 [1]
Link: https://github.com/raspberrypi/linux/commit/a6e47d5f4efbd2ea6a0b6565cd2f9b7bb217ded5 [2]
Signed-off-by: Maxim Devaev <mdevaev@gmail.com>
Signed-off-by: Phil Elwell <phil@raspberrypi.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210723155928.210019-1-mdevaev@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit afcff6dc690e24d636a41fd4bee6057e7c70eebd upstream.
The USB HID standard declares mandatory support for GET_IDLE and SET_IDLE
requests for Boot Keyboard. Most hosts can handle their absence, but others
like some old/strange UEFIs and BIOSes consider this a critical error
and refuse to work with f_hid.
This primitive implementation of saving and returning idle is sufficient
to meet the requirements of the standard and these devices.
Acked-by: Felipe Balbi <balbi@kernel.org>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Maxim Devaev <mdevaev@gmail.com>
Link: https://lore.kernel.org/r/20210721180351.129450-1-mdevaev@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit fa4a8dcfd51b911f101ebc461dfe22230b74dd64 upstream.
The usb_add_gadget_udc will add a new gadget to the udc class
driver list. Not calling usb_del_gadget_udc in error branch
will result in residual gadget entry in the udc driver list.
We fix it by calling usb_del_gadget_udc to clean it when error
return.
Fixes: 48ba02b2e2b1 ("usb: gadget: add udc driver for max3420")
Acked-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Link: https://lore.kernel.org/r/20210727073142.84666-1-zhangqilong3@huawei.com
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5b01248156bd75303e66985c351dee648c149979 upstream.
Add missing pm_runtime_disable() when probe error out. It could
avoid pm_runtime implementation complains when removing and probing
again the driver.
Fixes: 49db427232fe ("usb: gadget: Add UDC driver for tegra XUSB device mode controller")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Link: https://lore.kernel.org/r/20210618141441.107817-1-zhangqilong3@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 88693f770bb09c196b1eb5f06a484a254ecb9924 ]
Fix to return a negative error code from the error handling
case instead of 0.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20210618043835.2641360-1-yangyingliang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 33cb46c4676d01956811b68a29157ea969a5df70 ]
Running sparse checker it shows warning message about
incorrect endianness used for descriptor initialization:
| f_hid.c:91:43: warning: incorrect type in initializer (different base types)
| f_hid.c:91:43: expected restricted __le16 [usertype] bcdHID
| f_hid.c:91:43: got int
Fixing issue with cpu_to_le16() macro, however this is not a real issue
as the value is the same both endians.
Cc: Fabien Chouteau <fabien.chouteau@barco.com>
Cc: Segiy Stetsyuk <serg_stetsuk@ukr.net>
Signed-off-by: Ruslan Bilovol <ruslan.bilovol@gmail.com>
Link: https://lore.kernel.org/r/20210617162755.29676-1-ruslan.bilovol@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ecfbd7b9054bddb12cea07fda41bb3a79a7b0149 ]
FunctionFS device structure 'struct ffs_dev' and driver data structure
'struct ffs_data' are bound to each other with cross-reference pointers
'ffs_data->private_data' and 'ffs_dev->ffs_data'. While the first one
is supposed to be valid through the whole life of 'struct ffs_data'
(and while 'struct ffs_dev' exists non-freed), the second one is cleared
in 'ffs_closed()' (called from 'ffs_data_reset()' or the last
'ffs_data_put()'). This can be called several times, alternating in
different order with 'ffs_free_inst()', that, if possible, clears
the other cross-reference.
As a result, different cases of these calls order may leave stale
cross-reference pointers, used when the pointed structure is already
freed. Even if it occasionally doesn't cause kernel crash, this error
is reported by KASAN-enabled kernel configuration.
For example, the case [last 'ffs_data_put()' - 'ffs_free_inst()'] was
fixed by commit cdafb6d8b8da ("usb: gadget: f_fs: Fix use-after-free in
ffs_free_inst").
The other case ['ffs_data_reset()' - 'ffs_free_inst()' - 'ffs_data_put()']
now causes KASAN reported error [1], when 'ffs_data_reset()' clears
'ffs_dev->ffs_data', then 'ffs_free_inst()' frees the 'struct ffs_dev',
but can't clear 'ffs_data->private_data', which is then accessed
in 'ffs_closed()' called from 'ffs_data_put()'. This happens since
'ffs_dev->ffs_data' reference is cleared too early.
Moreover, one more use case, when 'ffs_free_inst()' is called immediately
after mounting FunctionFS device (that is before the descriptors are
written and 'ffs_ready()' is called), and then 'ffs_data_reset()'
or 'ffs_data_put()' is called from accessing "ep0" file or unmounting
the device. This causes KASAN error report like [2], since
'ffs_dev->ffs_data' is not yet set when 'ffs_free_inst()' can't properly
clear 'ffs_data->private_data', that is later accessed to freed structure.
Fix these (and may be other) cases of stale pointers access by moving
setting and clearing of the mentioned cross-references to the single
places, setting both of them when 'struct ffs_data' is created and
bound to 'struct ffs_dev', and clearing both of them when one of the
structures is destroyed. It seems convenient to make this pointer
initialization and structures binding in 'ffs_acquire_dev()' and
make pointers clearing in 'ffs_release_dev()'. This required some
changes in these functions parameters and return types.
Also, 'ffs_release_dev()' calling requires some cleanup, fixing minor
issues, like (1) 'ffs_release_dev()' is not called if 'ffs_free_inst()'
is called without unmounting the device, and "release_dev" callback
is not called at all, or (2) "release_dev" callback is called before
"ffs_closed" callback on unmounting, which seems to be not correctly
nested with "acquire_dev" and "ffs_ready" callbacks.
Make this cleanup togther with other mentioned 'ffs_release_dev()' changes.
[1]
==================================================================
root@rcar-gen3:~# mkdir /dev/cfs
root@rcar-gen3:~# mkdir /dev/ffs
root@rcar-gen3:~# modprobe libcomposite
root@rcar-gen3:~# mount -t configfs none /dev/cfs
root@rcar-gen3:~# mkdir /dev/cfs/usb_gadget/g1
root@rcar-gen3:~# mkdir /dev/cfs/usb_gadget/g1/functions/ffs.ffs
[ 64.340664] file system registered
root@rcar-gen3:~# mount -t functionfs ffs /dev/ffs
root@rcar-gen3:~# cd /dev/ffs
root@rcar-gen3:/dev/ffs# /home/root/ffs-test
ffs-test: info: ep0: writing descriptors (in v2 format)
[ 83.181442] read descriptors
[ 83.186085] read strings
ffs-test: info: ep0: writing strings
ffs-test: dbg: ep1: starting
ffs-test: dbg: ep2: starting
ffs-test: info: ep1: starts
ffs-test: info: ep2: starts
ffs-test: info: ep0: starts
^C
root@rcar-gen3:/dev/ffs# cd /home/root/
root@rcar-gen3:~# rmdir /dev/cfs/usb_gadget/g1/functions/ffs.ffs
[ 98.935061] unloading
root@rcar-gen3:~# umount /dev/ffs
[ 102.734301] ==================================================================
[ 102.742059] BUG: KASAN: use-after-free in ffs_release_dev+0x64/0xa8 [usb_f_fs]
[ 102.749683] Write of size 1 at addr ffff0004d46ff549 by task umount/2997
[ 102.756709]
[ 102.758311] CPU: 0 PID: 2997 Comm: umount Not tainted 5.13.0-rc4+ #8
[ 102.764971] Hardware name: Renesas Salvator-X board based on r8a77951 (DT)
[ 102.772179] Call trace:
[ 102.774779] dump_backtrace+0x0/0x330
[ 102.778653] show_stack+0x20/0x2c
[ 102.782152] dump_stack+0x11c/0x1ac
[ 102.785833] print_address_description.constprop.0+0x30/0x274
[ 102.791862] kasan_report+0x14c/0x1c8
[ 102.795719] __asan_report_store1_noabort+0x34/0x58
[ 102.800840] ffs_release_dev+0x64/0xa8 [usb_f_fs]
[ 102.805801] ffs_fs_kill_sb+0x50/0x84 [usb_f_fs]
[ 102.810663] deactivate_locked_super+0xa0/0xf0
[ 102.815339] deactivate_super+0x98/0xac
[ 102.819378] cleanup_mnt+0xd0/0x1b0
[ 102.823057] __cleanup_mnt+0x1c/0x28
[ 102.826823] task_work_run+0x104/0x180
[ 102.830774] do_notify_resume+0x458/0x14e0
[ 102.835083] work_pending+0xc/0x5f8
[ 102.838762]
[ 102.840357] Allocated by task 2988:
[ 102.844032] kasan_save_stack+0x28/0x58
[ 102.848071] kasan_set_track+0x28/0x3c
[ 102.852016] ____kasan_kmalloc+0x84/0x9c
[ 102.856142] __kasan_kmalloc+0x10/0x1c
[ 102.860088] __kmalloc+0x214/0x2f8
[ 102.863678] kzalloc.constprop.0+0x14/0x20 [usb_f_fs]
[ 102.868990] ffs_alloc_inst+0x8c/0x208 [usb_f_fs]
[ 102.873942] try_get_usb_function_instance+0xf0/0x164 [libcomposite]
[ 102.880629] usb_get_function_instance+0x64/0x68 [libcomposite]
[ 102.886858] function_make+0x128/0x1ec [libcomposite]
[ 102.892185] configfs_mkdir+0x330/0x590 [configfs]
[ 102.897245] vfs_mkdir+0x12c/0x1bc
[ 102.900835] do_mkdirat+0x180/0x1d0
[ 102.904513] __arm64_sys_mkdirat+0x80/0x94
[ 102.908822] invoke_syscall+0xf8/0x25c
[ 102.912772] el0_svc_common.constprop.0+0x150/0x1a0
[ 102.917891] do_el0_svc+0xa0/0xd4
[ 102.921386] el0_svc+0x24/0x34
[ 102.924613] el0_sync_handler+0xcc/0x154
[ 102.928743] el0_sync+0x198/0x1c0
[ 102.932238]
[ 102.933832] Freed by task 2996:
[ 102.937144] kasan_save_stack+0x28/0x58
[ 102.941181] kasan_set_track+0x28/0x3c
[ 102.945128] kasan_set_free_info+0x28/0x4c
[ 102.949435] ____kasan_slab_free+0x104/0x118
[ 102.953921] __kasan_slab_free+0x18/0x24
[ 102.958047] slab_free_freelist_hook+0x148/0x1f0
[ 102.962897] kfree+0x318/0x440
[ 102.966123] ffs_free_inst+0x164/0x2d8 [usb_f_fs]
[ 102.971075] usb_put_function_instance+0x84/0xa4 [libcomposite]
[ 102.977302] ffs_attr_release+0x18/0x24 [usb_f_fs]
[ 102.982344] config_item_put+0x140/0x1a4 [configfs]
[ 102.987486] configfs_rmdir+0x3fc/0x518 [configfs]
[ 102.992535] vfs_rmdir+0x114/0x234
[ 102.996122] do_rmdir+0x274/0x2b0
[ 102.999617] __arm64_sys_unlinkat+0x94/0xc8
[ 103.004015] invoke_syscall+0xf8/0x25c
[ 103.007961] el0_svc_common.constprop.0+0x150/0x1a0
[ 103.013080] do_el0_svc+0xa0/0xd4
[ 103.016575] el0_svc+0x24/0x34
[ 103.019801] el0_sync_handler+0xcc/0x154
[ 103.023930] el0_sync+0x198/0x1c0
[ 103.027426]
[ 103.029020] The buggy address belongs to the object at ffff0004d46ff500
[ 103.029020] which belongs to the cache kmalloc-128 of size 128
[ 103.042079] The buggy address is located 73 bytes inside of
[ 103.042079] 128-byte region [ffff0004d46ff500, ffff0004d46ff580)
[ 103.054236] The buggy address belongs to the page:
[ 103.059262] page:0000000021aa849b refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff0004d46fee00 pfn:0x5146fe
[ 103.070437] head:0000000021aa849b order:1 compound_mapcount:0
[ 103.076456] flags: 0x8000000000010200(slab|head|zone=2)
[ 103.081948] raw: 8000000000010200 fffffc0013521a80 0000000d0000000d ffff0004c0002300
[ 103.090052] raw: ffff0004d46fee00 000000008020001e 00000001ffffffff 0000000000000000
[ 103.098150] page dumped because: kasan: bad access detected
[ 103.103985]
[ 103.105578] Memory state around the buggy address:
[ 103.110602] ffff0004d46ff400: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 103.118161] ffff0004d46ff480: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 103.125726] >ffff0004d46ff500: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 103.133284] ^
[ 103.139120] ffff0004d46ff580: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 103.146679] ffff0004d46ff600: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 103.154238] ==================================================================
[ 103.161792] Disabling lock debugging due to kernel taint
[ 103.167319] Unable to handle kernel paging request at virtual address 0037801d6000018e
[ 103.175406] Mem abort info:
[ 103.178457] ESR = 0x96000004
[ 103.181609] EC = 0x25: DABT (current EL), IL = 32 bits
[ 103.187020] SET = 0, FnV = 0
[ 103.190185] EA = 0, S1PTW = 0
[ 103.193417] Data abort info:
[ 103.196385] ISV = 0, ISS = 0x00000004
[ 103.200315] CM = 0, WnR = 0
[ 103.203366] [0037801d6000018e] address between user and kernel address ranges
[ 103.210611] Internal error: Oops: 96000004 [#1] PREEMPT SMP
[ 103.216231] Modules linked in: usb_f_fs libcomposite configfs ath9k_htc led_class mac80211 libarc4 ath9k_common ath9k_hw ath cfg80211 aes_ce_blk sata_rc4
[ 103.259233] CPU: 0 PID: 2997 Comm: umount Tainted: G B 5.13.0-rc4+ #8
[ 103.267031] Hardware name: Renesas Salvator-X board based on r8a77951 (DT)
[ 103.273951] pstate: 00000005 (nzcv daif -PAN -UAO -TCO BTYPE=--)
[ 103.280001] pc : ffs_data_clear+0x138/0x370 [usb_f_fs]
[ 103.285197] lr : ffs_data_clear+0x124/0x370 [usb_f_fs]
[ 103.290385] sp : ffff800014777a80
[ 103.293725] x29: ffff800014777a80 x28: ffff0004d7649c80 x27: 0000000000000000
[ 103.300931] x26: ffff800014777fb0 x25: ffff60009aec9394 x24: ffff0004d7649ca4
[ 103.308136] x23: 1fffe0009a3d063a x22: dfff800000000000 x21: ffff0004d1e831d0
[ 103.315340] x20: e1c000eb00000bb4 x19: ffff0004d1e83000 x18: 0000000000000000
[ 103.322545] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
[ 103.329748] x14: 0720072007200720 x13: 0720072007200720 x12: 1ffff000012ef658
[ 103.336952] x11: ffff7000012ef658 x10: 0720072007200720 x9 : ffff800011322648
[ 103.344157] x8 : ffff800014777818 x7 : ffff80000977b2c7 x6 : 0000000000000000
[ 103.351359] x5 : 0000000000000001 x4 : ffff7000012ef659 x3 : 0000000000000001
[ 103.358562] x2 : 0000000000000000 x1 : 1c38001d6000018e x0 : e1c000eb00000c70
[ 103.365766] Call trace:
[ 103.368235] ffs_data_clear+0x138/0x370 [usb_f_fs]
[ 103.373076] ffs_data_reset+0x20/0x304 [usb_f_fs]
[ 103.377829] ffs_data_closed+0x1ec/0x244 [usb_f_fs]
[ 103.382755] ffs_fs_kill_sb+0x70/0x84 [usb_f_fs]
[ 103.387420] deactivate_locked_super+0xa0/0xf0
[ 103.391905] deactivate_super+0x98/0xac
[ 103.395776] cleanup_mnt+0xd0/0x1b0
[ 103.399299] __cleanup_mnt+0x1c/0x28
[ 103.402906] task_work_run+0x104/0x180
[ 103.406691] do_notify_resume+0x458/0x14e0
[ 103.410823] work_pending+0xc/0x5f8
[ 103.414351] Code: b4000a54 9102f280 12000802 d343fc01 (38f66821)
[ 103.420490] ---[ end trace 57b43a50e8244f57 ]---
Segmentation fault
root@rcar-gen3:~#
==================================================================
[2]
==================================================================
root@rcar-gen3:~# mkdir /dev/ffs
root@rcar-gen3:~# modprobe libcomposite
root@rcar-gen3:~#
root@rcar-gen3:~# mount -t configfs none /dev/cfs
root@rcar-gen3:~# mkdir /dev/cfs/usb_gadget/g1
root@rcar-gen3:~# mkdir /dev/cfs/usb_gadget/g1/functions/ffs.ffs
[ 54.766480] file system registered
root@rcar-gen3:~# mount -t functionfs ffs /dev/ffs
root@rcar-gen3:~# rmdir /dev/cfs/usb_gadget/g1/functions/ffs.ffs
[ 63.197597] unloading
root@rcar-gen3:~# cat /dev/ffs/ep0
cat: read error:[ 67.213506] ==================================================================
[ 67.222095] BUG: KASAN: use-after-free in ffs_data_clear+0x70/0x370 [usb_f_fs]
[ 67.229699] Write of size 1 at addr ffff0004c26e974a by task cat/2994
[ 67.236446]
[ 67.238045] CPU: 0 PID: 2994 Comm: cat Not tainted 5.13.0-rc4+ #8
[ 67.244431] Hardware name: Renesas Salvator-X board based on r8a77951 (DT)
[ 67.251624] Call trace:
[ 67.254212] dump_backtrace+0x0/0x330
[ 67.258081] show_stack+0x20/0x2c
[ 67.261579] dump_stack+0x11c/0x1ac
[ 67.265260] print_address_description.constprop.0+0x30/0x274
[ 67.271286] kasan_report+0x14c/0x1c8
[ 67.275143] __asan_report_store1_noabort+0x34/0x58
[ 67.280265] ffs_data_clear+0x70/0x370 [usb_f_fs]
[ 67.285220] ffs_data_reset+0x20/0x304 [usb_f_fs]
[ 67.290172] ffs_data_closed+0x240/0x244 [usb_f_fs]
[ 67.295305] ffs_ep0_release+0x40/0x54 [usb_f_fs]
[ 67.300256] __fput+0x304/0x580
[ 67.303576] ____fput+0x18/0x24
[ 67.306893] task_work_run+0x104/0x180
[ 67.310846] do_notify_resume+0x458/0x14e0
[ 67.315154] work_pending+0xc/0x5f8
[ 67.318834]
[ 67.320429] Allocated by task 2988:
[ 67.324105] kasan_save_stack+0x28/0x58
[ 67.328144] kasan_set_track+0x28/0x3c
[ 67.332090] ____kasan_kmalloc+0x84/0x9c
[ 67.336217] __kasan_kmalloc+0x10/0x1c
[ 67.340163] __kmalloc+0x214/0x2f8
[ 67.343754] kzalloc.constprop.0+0x14/0x20 [usb_f_fs]
[ 67.349066] ffs_alloc_inst+0x8c/0x208 [usb_f_fs]
[ 67.354017] try_get_usb_function_instance+0xf0/0x164 [libcomposite]
[ 67.360705] usb_get_function_instance+0x64/0x68 [libcomposite]
[ 67.366934] function_make+0x128/0x1ec [libcomposite]
[ 67.372260] configfs_mkdir+0x330/0x590 [configfs]
[ 67.377320] vfs_mkdir+0x12c/0x1bc
[ 67.380911] do_mkdirat+0x180/0x1d0
[ 67.384589] __arm64_sys_mkdirat+0x80/0x94
[ 67.388899] invoke_syscall+0xf8/0x25c
[ 67.392850] el0_svc_common.constprop.0+0x150/0x1a0
[ 67.397969] do_el0_svc+0xa0/0xd4
[ 67.401464] el0_svc+0x24/0x34
[ 67.404691] el0_sync_handler+0xcc/0x154
[ 67.408819] el0_sync+0x198/0x1c0
[ 67.412315]
[ 67.413909] Freed by task 2993:
[ 67.417220] kasan_save_stack+0x28/0x58
[ 67.421257] kasan_set_track+0x28/0x3c
[ 67.425204] kasan_set_free_info+0x28/0x4c
[ 67.429513] ____kasan_slab_free+0x104/0x118
[ 67.434001] __kasan_slab_free+0x18/0x24
[ 67.438128] slab_free_freelist_hook+0x148/0x1f0
[ 67.442978] kfree+0x318/0x440
[ 67.446205] ffs_free_inst+0x164/0x2d8 [usb_f_fs]
[ 67.451156] usb_put_function_instance+0x84/0xa4 [libcomposite]
[ 67.457385] ffs_attr_release+0x18/0x24 [usb_f_fs]
[ 67.462428] config_item_put+0x140/0x1a4 [configfs]
[ 67.467570] configfs_rmdir+0x3fc/0x518 [configfs]
[ 67.472626] vfs_rmdir+0x114/0x234
[ 67.476215] do_rmdir+0x274/0x2b0
[ 67.479710] __arm64_sys_unlinkat+0x94/0xc8
[ 67.484108] invoke_syscall+0xf8/0x25c
[ 67.488055] el0_svc_common.constprop.0+0x150/0x1a0
[ 67.493175] do_el0_svc+0xa0/0xd4
[ 67.496671] el0_svc+0x24/0x34
[ 67.499896] el0_sync_handler+0xcc/0x154
[ 67.504024] el0_sync+0x198/0x1c0
[ 67.507520]
[ 67.509114] The buggy address belongs to the object at ffff0004c26e9700
[ 67.509114] which belongs to the cache kmalloc-128 of size 128
[ 67.522171] The buggy address is located 74 bytes inside of
[ 67.522171] 128-byte region [ffff0004c26e9700, ffff0004c26e9780)
[ 67.534328] The buggy address belongs to the page:
[ 67.539355] page:000000003177a217 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x5026e8
[ 67.549175] head:000000003177a217 order:1 compound_mapcount:0
[ 67.555195] flags: 0x8000000000010200(slab|head|zone=2)
[ 67.560687] raw: 8000000000010200 fffffc0013037100 0000000c00000002 ffff0004c0002300
[ 67.568791] raw: 0000000000000000 0000000080200020 00000001ffffffff 0000000000000000
[ 67.576890] page dumped because: kasan: bad access detected
[ 67.582725]
[ 67.584318] Memory state around the buggy address:
[ 67.589343] ffff0004c26e9600: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 67.596903] ffff0004c26e9680: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 67.604463] >ffff0004c26e9700: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 67.612022] ^
[ 67.617860] ffff0004c26e9780: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 67.625421] ffff0004c26e9800: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 67.632981] ==================================================================
[ 67.640535] Disabling lock debugging due to kernel taint
File descriptor[ 67.646100] Unable to handle kernel paging request at virtual address fabb801d4000018d
in bad state
[ 67.655456] Mem abort info:
[ 67.659619] ESR = 0x96000004
[ 67.662801] EC = 0x25: DABT (current EL), IL = 32 bits
[ 67.668225] SET = 0, FnV = 0
[ 67.671375] EA = 0, S1PTW = 0
[ 67.674613] Data abort info:
[ 67.677587] ISV = 0, ISS = 0x00000004
[ 67.681522] CM = 0, WnR = 0
[ 67.684588] [fabb801d4000018d] address between user and kernel address ranges
[ 67.691849] Internal error: Oops: 96000004 [#1] PREEMPT SMP
[ 67.697470] Modules linked in: usb_f_fs libcomposite configfs ath9k_htc led_class mac80211 libarc4 ath9k_common ath9k_hw ath cfg80211 aes_ce_blk crypto_simd cryptd aes_ce_cipher ghash_ce gf128mul sha2_ce sha1_ce evdev sata_rcar libata xhci_plat_hcd scsi_mod xhci_hcd rene4
[ 67.740467] CPU: 0 PID: 2994 Comm: cat Tainted: G B 5.13.0-rc4+ #8
[ 67.748005] Hardware name: Renesas Salvator-X board based on r8a77951 (DT)
[ 67.754924] pstate: 00000005 (nzcv daif -PAN -UAO -TCO BTYPE=--)
[ 67.760974] pc : ffs_data_clear+0x138/0x370 [usb_f_fs]
[ 67.766178] lr : ffs_data_clear+0x124/0x370 [usb_f_fs]
[ 67.771365] sp : ffff800014767ad0
[ 67.774706] x29: ffff800014767ad0 x28: ffff800009cf91c0 x27: ffff0004c54861a0
[ 67.781913] x26: ffff0004dc90b288 x25: 1fffe00099ec10f5 x24: 00000000000a801d
[ 67.789118] x23: 1fffe00099f6953a x22: dfff800000000000 x21: ffff0004cfb4a9d0
[ 67.796322] x20: d5e000ea00000bb1 x19: ffff0004cfb4a800 x18: 0000000000000000
[ 67.803526] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
[ 67.810730] x14: 0720072007200720 x13: 0720072007200720 x12: 1ffff000028ecefa
[ 67.817934] x11: ffff7000028ecefa x10: 0720072007200720 x9 : ffff80001132c014
[ 67.825137] x8 : ffff8000147677d8 x7 : ffff8000147677d7 x6 : 0000000000000000
[ 67.832341] x5 : 0000000000000001 x4 : ffff7000028ecefb x3 : 0000000000000001
[ 67.839544] x2 : 0000000000000005 x1 : 1abc001d4000018d x0 : d5e000ea00000c6d
[ 67.846748] Call trace:
[ 67.849218] ffs_data_clear+0x138/0x370 [usb_f_fs]
[ 67.854058] ffs_data_reset+0x20/0x304 [usb_f_fs]
[ 67.858810] ffs_data_closed+0x240/0x244 [usb_f_fs]
[ 67.863736] ffs_ep0_release+0x40/0x54 [usb_f_fs]
[ 67.868488] __fput+0x304/0x580
[ 67.871665] ____fput+0x18/0x24
[ 67.874837] task_work_run+0x104/0x180
[ 67.878622] do_notify_resume+0x458/0x14e0
[ 67.882754] work_pending+0xc/0x5f8
[ 67.886282] Code: b4000a54 9102f280 12000802 d343fc01 (38f66821)
[ 67.892422] ---[ end trace 6d7cedf53d7abbea ]---
Segmentation fault
root@rcar-gen3:~#
==================================================================
Fixes: 4b187fceec3c ("usb: gadget: FunctionFS: add devices management code")
Fixes: 3262ad824307 ("usb: gadget: f_fs: Stop ffs_closed NULL pointer dereference")
Fixes: cdafb6d8b8da ("usb: gadget: f_fs: Fix use-after-free in ffs_free_inst")
Reported-by: Bhuvanesh Surachari <bhuvanesh_surachari@mentor.com>
Tested-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Reviewed-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Signed-off-by: Andrew Gabbasov <andrew_gabbasov@mentor.com>
Link: https://lore.kernel.org/r/20210603171507.22514-1-andrew_gabbasov@mentor.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 4249d6fbc10fd997abdf8a1ea49c0389a0edf706 upstream.
when receive eem echo command, it will send a response,
but queue this response to the usb request which allocate
from gadget device endpoint zero,
and transmit the request to IN endpoint of eem interface.
on dwc3 gadget, it will trigger following warning in function
__dwc3_gadget_ep_queue(),
if (WARN(req->dep != dep, "request %pK belongs to '%s'\n",
&req->request, req->dep->name))
return -EINVAL;
fix it by allocating a usb request from IN endpoint of eem interface,
and transmit the usb request to same IN endpoint of eem interface.
Signed-off-by: Linyu Yuan <linyyuan@codeaurora.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210616115142.34075-1-linyyuan@codeaurora.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 032e288097a553db5653af552dd8035cd2a0ba96 upstream.
usb_assign_descriptors() is called with 5 parameters,
the last 4 of which are the usb_descriptor_header for:
full-speed (USB1.1 - 12Mbps [including USB1.0 low-speed @ 1.5Mbps),
high-speed (USB2.0 - 480Mbps),
super-speed (USB3.0 - 5Gbps),
super-speed-plus (USB3.1 - 10Gbps).
The differences between full/high/super-speed descriptors are usually
substantial (due to changes in the maximum usb block size from 64 to 512
to 1024 bytes and other differences in the specs), while the difference
between 5 and 10Gbps descriptors may be as little as nothing
(in many cases the same tuning is simply good enough).
However if a gadget driver calls usb_assign_descriptors() with
a NULL descriptor for super-speed-plus and is then used on a max 10gbps
configuration, the kernel will crash with a null pointer dereference,
when a 10gbps capable device port + cable + host port combination shows up.
(This wouldn't happen if the gadget max-speed was set to 5gbps, but
it of course defaults to the maximum, and there's no real reason to
artificially limit it)
The fix is to simply use the 5gbps descriptor as the 10gbps descriptor,
if a 10gbps descriptor wasn't provided.
Obviously this won't fix the problem if the 5gbps descriptor is also
NULL, but such cases can't be so trivially solved (and any such gadgets
are unlikely to be used with USB3 ports any way).
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210609024459.1126080-1-zenczykowski@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 90c4d05780d47e14a50e11a7f17373104cd47d25 upstream.
This avoids a null pointer dereference in
f_{ecm,eem,hid,loopback,printer,rndis,serial,sourcesink,subset,tcm}
by simply reusing the 5gbps config for 10gbps.
Fixes: eaef50c76057 ("usb: gadget: Update usb_assign_descriptors for SuperSpeedPlus")
Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Cc: Lorenzo Colitti <lorenzo@google.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Michael R Sweet <msweet@msweet.org>
Cc: Mike Christie <michael.christie@oracle.com>
Cc: Pawel Laszczak <pawell@cadence.com>
Cc: Peter Chen <peter.chen@nxp.com>
Cc: Sudhakar Panneerselvam <sudhakar.panneerselvam@oracle.com>
Cc: Wei Ming Chen <jj251510319013@gmail.com>
Cc: Will McVicker <willmcvicker@google.com>
Cc: Zqiang <qiang.zhang@windriver.com>
Reviewed-By: Lorenzo Colitti <lorenzo@google.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Link: https://lore.kernel.org/r/20210608044141.3898496-1-zenczykowski@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 305f670846a31a261462577dd0b967c4fa796871 upstream.
when skb_clone() or skb_copy_expand() fail,
it should pull skb with lengh indicated by header,
or not it will read network data and check it as header.
Cc: <stable@vger.kernel.org>
Signed-off-by: Linyu Yuan <linyyuan@codeaurora.com>
Link: https://lore.kernel.org/r/20210608233547.3767-1-linyyuan@codeaurora.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6fc1db5e6211e30fbb1cee8d7925d79d4ed2ae14 upstream.
During unbind, ffs_func_eps_disable() will be executed, resulting in
completion callbacks for any pending USB requests. When using AIO,
irrespective of the completion status, io_data work is queued to
io_completion_wq to evaluate and handle the completed requests. Since
work runs asynchronously to the unbind() routine, there can be a
scenario where the work runs after the USB gadget has been fully
removed, resulting in accessing of a resource which has been already
freed. (i.e. usb_ep_free_request() accessing the USB ep structure)
Explicitly drain the io_completion_wq, instead of relying on the
destroy_workqueue() (in ffs_data_put()) to make sure no pending
completion work items are running.
Signed-off-by: Wesley Cheng <wcheng@codeaurora.org>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/1621644261-1236-1-git-send-email-wcheng@codeaurora.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1958ff5ad2d4908b44a72bcf564dfe67c981e7fe upstream.
The reasoning for this change is that if we already had
a packet pending, then we also already had a pending timer,
and as such there is no need to reschedule it.
This also prevents packets getting delayed 60 ms worst case
under a tiny packet every 290us transmit load, by keeping the
timeout always relative to the first queued up packet.
(300us delay * 16KB max aggregation / 80 byte packet =~ 60 ms)
As such the first packet is now at most delayed by 300us.
Under low transmit load, this will simply result in us sending
a shorter aggregate, as originally intended.
This patch has the benefit of greatly reducing (by ~10 factor
with 1500 byte frames aggregated into 16 kiB) the number of
(potentially pretty costly) updates to the hrtimer.
Cc: Brooke Basile <brookebasile@gmail.com>
Cc: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Link: https://lore.kernel.org/r/20210608085438.813960-1-zenczykowski@gmail.com
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3370139745853f7826895293e8ac3aec1430508e upstream.
[ 190.544755] configfs-gadget gadget: notify speed -44967296
This is because 4250000000 - 2**32 is -44967296.
Fixes: 9f6ce4240a2b ("usb: gadget: f_ncm.c added")
Cc: Brooke Basile <brookebasile@gmail.com>
Cc: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Lorenzo Colitti <lorenzo@google.com>
Cc: Yauheni Kaliuta <yauheni.kaliuta@nokia.com>
Cc: Linux USB Mailing List <linux-usb@vger.kernel.org>
Acked-By: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210608005344.3762668-1-zenczykowski@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e752dbc59e1241b13b8c4f7b6eb582862e7668fe upstream.
The usb3_start_pipen() is called by renesas_usb3_ep_queue() and
usb3_request_done_pipen() so that usb3_start_pipen() is possible
to cause a race when getting usb3_first_req like below:
renesas_usb3_ep_queue()
spin_lock_irqsave()
list_add_tail()
spin_unlock_irqrestore()
usb3_start_pipen()
usb3_first_req = usb3_get_request() --- [1]
--- interrupt ---
usb3_irq_dma_int()
usb3_request_done_pipen()
usb3_get_request()
usb3_start_pipen()
usb3_first_req = usb3_get_request()
...
(the req is possible to be finished in the interrupt)
The usb3_first_req [1] above may have been finished after the interrupt
ended so that this driver caused to start a transfer wrongly. To fix this
issue, getting/checking the usb3_first_req are under spin_lock_irqsave()
in the same section.
Fixes: 746bfe63bba3 ("usb: gadget: renesas_usb3: add support for Renesas USB3.0 peripheral controller")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20210524060155.1178724-1-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
platform_get_resource
[ Upstream commit 9c2076090c2815fe7c49676df68dde7e60a9b9fc ]
The call to platform_get_resource can potentially return a NULL pointer
on failure, so add this check and return -EINVAL if it fails.
Fixes: c41442474a26 ("usb: gadget: R8A66597 peripheral controller support.")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Addresses-Coverity: ("Dereference null return")
Link: https://lore.kernel.org/r/20210406184510.433497-1-colin.king@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2e3d055bf27d70204cae349335a62a4f9b7c165a ]
IS_ERR() and PTR_ERR() use wrong pointer, it should be
udc->virt_addr, fix it.
Fixes: 1b9f35adb0ff ("usb: gadget: udc: Add Synopsys UDC Platform driver")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20210330130159.1051979-1-yangyingliang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit bd4d607044b961cecbf8c4c2f3bb5da4fb156993 ]
Currently the virtual port_dev device is passed to DMA API, and this is
wrong because the device passed to DMA API calls must be the actual
hardware device performing the DMA.
The patch replaces usb_gadget_map_request/usb_gadget_unmap_request APIs
with usb_gadget_map_request_by_dev/usb_gadget_unmap_request_by_dev APIs
so the DMA capable platform device can be passed to the DMA APIs.
The patch fixes below backtrace detected on Facebook AST2500 OpenBMC
platforms:
[<80106550>] show_stack+0x20/0x24
[<80106868>] dump_stack+0x28/0x30
[<80823540>] __warn+0xfc/0x110
[<8011ac30>] warn_slowpath_fmt+0xb0/0xc0
[<8011ad44>] dma_map_page_attrs+0x24c/0x314
[<8016a27c>] usb_gadget_map_request_by_dev+0x100/0x1e4
[<805cedd8>] usb_gadget_map_request+0x1c/0x20
[<805cefbc>] ast_vhub_epn_queue+0xa0/0x1d8
[<7f02f710>] usb_ep_queue+0x48/0xc4
[<805cd3e8>] ecm_do_notify+0xf8/0x248
[<7f145920>] ecm_set_alt+0xc8/0x1d0
[<7f145c34>] composite_setup+0x680/0x1d30
[<7f00deb8>] ast_vhub_ep0_handle_setup+0xa4/0x1bc
[<7f02ee94>] ast_vhub_dev_irq+0x58/0x84
[<7f0309e0>] ast_vhub_irq+0xb0/0x1c8
[<7f02e118>] __handle_irq_event_percpu+0x50/0x19c
[<8015e5bc>] handle_irq_event_percpu+0x38/0x8c
[<8015e758>] handle_irq_event+0x38/0x4c
Fixes: 7ecca2a4080c ("usb/gadget: Add driver for Aspeed SoC virtual hub")
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Tao Ren <rentao.bupt@gmail.com>
Link: https://lore.kernel.org/r/20210331045831.28700-1-rentao.bupt@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e5242861ec6a0bce25b4cd10af0fc8a508fd067d ]
Some 'clk_prepare_enable()' and 'clk_get()' must be undone in the error
handling path of the probe function, as already done in the remove
function.
Fixes: 3fc154b6b813 ("USB Gadget driver for Samsung s3c2410 ARM SoC")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/2bee52e4ce968f48b4c32545cf8f3b2ab825ba82.1616 |
