summaryrefslogtreecommitdiff
path: root/drivers/usb
AgeCommit message (Collapse)AuthorFilesLines
2024-09-03usb: Add tunnel_mode parameter to usb device structureMathias Nyman3-8/+16
Add 'tunnel_mode' enum to usb device structure to describe if a USB3 link is tunneled over USB4, or connected directly using native USB2/USB3 protocols. Tunneled devices depend on USB4 NHI host to maintain the tunnel. Knowledge about tunneled devices is important to ensure correct suspend and resume order between USB4 hosts and tunneled devices. i.e. make sure tunnel is up before the USB device using it resumes. USB hosts such as xHCI may have vendor specific ways to detect tunneled connections. This 'tunnel_mode' parameter can be set by USB3 host driver during hcd->driver->update_device(hcd, udev) callback. tunnel_mode can be set to: USB_LINK_UNKNOWN = 0 USB_LINK_NATIVE USB_LINK_TUNNELED USB_LINK_UNKNOWN is used in case host is not capable of detecting tunneled links. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20240830152630.3943215-3-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-09-03xhci: Add USB4 tunnel detection for USB3 devices on Intel hostsMathias Nyman4-0/+48
Knowledge about tunneled devices is useful in order to correctly describe the relationship between tunneled USB3 device and USB4 Host Interface, ensuring proper suspend and resume order, and to be able to power down Thunderbolt if there is no need for tunneling. Intel hosts share if a USB3 connection is native or tunneled via vendor specific "SPR eSS PORT" registers. These vendor registers are available if host supports a vendor specific SPR shadow extended capability with ID 206. Registers are per USB3 port and 0x20 apart. Knowing the tunneling status of the device connected to roothub is enough as all its children will have the same status. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20240830152630.3943215-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-09-03usb: f_mass_storage: Make use of the helper macro kthread_run()Hongbo Li1-2/+1
Replace kthread_create/wake_up_process() with kthread_run() to simplify the code. Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Hongbo Li <lihongbo22@huawei.com> Link: https://lore.kernel.org/r/20240903014249.3098082-1-lihongbo22@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-09-03usb: gadget: f_acm: make bInterfaceProtocol configurableMichael Walle2-2/+54
The bInterfaceProtocol is hardcoded to USB_CDC_ACM_PROTO_AT_V25TER. This will lead to problems with ModemManger which will gladly try to probe that port as a modem if the gadget also has a network function. ModemManager will try to send AT commands to the ACM port. Make the bInterfaceProtocol configurable. For this, track the number of instances and only allow write to the property if there are no intances (yet). This will also set bFunctionProtocol to the same value, see commit 5c8db070b448 ("USB: Change acm_iad_descriptor bFunctionProtocol to USB_CDC_ACM_PROTO_AT_V25TER") for more details. Signed-off-by: Michael Walle <mwalle@kernel.org> Link: https://lore.kernel.org/r/20240825180446.3757073-1-mwalle@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-09-03usb: ohci-nxp: Use helper function devm_clk_get_enabled()Zhang Zekun1-14/+4
devm_clk_get() and clk_prepare_enable() can be replaced by helper function devm_clk_get_enabled(). Let's use devm_clk_get_enabled() to simplify code and avoid calling clk_disable_unprepare(). Signed-off-by: Zhang Zekun <zhangzekun11@huawei.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20240902123020.29267-3-zhangzekun11@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-09-03usb: gadget: udc-xilinx: Remove trailing space after \n newlineColin Ian King1-1/+1
There is a extraneous space after a newline in a dev_dbg message. Remove it. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Link: https://lore.kernel.org/r/20240901162357.144222-1-colin.i.king@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-09-03usb: chipidea: npcm: Fix coding style with missing spaceAndreas Kühn1-1/+1
Fixed coding style issue: added missing space. Signed-off-by: Andreas Kühn <andreas.kuehn@diekuehnen.com> Link: https://lore.kernel.org/r/20240831193407.11302-1-andreas.kuehn@diekuehnen.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-09-03usb: dwc2: Adjust the timing of USB Driver Interrupt Registration in the ↵Shawn Shao1-12/+14
Crashkernel Scenario The issue is that before entering the crash kernel, the DWC USB controller did not perform operations such as resetting the interrupt mask bits. After entering the crash kernel,before the USB interrupt handler registration was completed while loading the DWC USB driver,an GINTSTS_SOF interrupt was received.This triggered the misroute_irq process within the GIC handling framework,ultimately leading to the misrouting of the interrupt,causing it to be handled by the wrong interrupt handler and resulting in the issue. Summary:In a scenario where the kernel triggers a panic and enters the crash kernel,it is necessary to ensure that the interrupt mask bit is not enabled before the interrupt registration is complete. If an interrupt reaches the CPU at this moment,it will certainly not be handled correctly,especially in cases where this interrupt is reported frequently. Please refer to the Crashkernel dmesg information as follows (the message on line 3 was added before devm_request_irq is called by the dwc2_driver_probe function): [ 5.866837][ T1] dwc2 JMIC0010:01: supply vusb_d not found, using dummy regulator [ 5.874588][ T1] dwc2 JMIC0010:01: supply vusb_a not found, using dummy regulator [ 5.882335][ T1] dwc2 JMIC0010:01: before devm_request_irq irq: [71], gintmsk[0xf300080e], gintsts[0x04200009] [ 5.892686][ C0] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.10.0-jmnd1.2_RC #18 [ 5.900327][ C0] Hardware name: CMSS HyperCard4-25G/HyperCard4-25G, BIOS 1.6.4 Jul 8 2024 [ 5.908836][ C0] Call trace: [ 5.911965][ C0] dump_backtrace+0x0/0x1f0 [ 5.916308][ C0] show_stack+0x20/0x30 [ 5.920304][ C0] dump_stack+0xd8/0x140 [ 5.924387][ C0] pcie_xxx_handler+0x3c/0x1d8 [ 5.930121][ C0] __handle_irq_event_percpu+0x64/0x1e0 [ 5.935506][ C0] handle_irq_event+0x80/0x1d0 [ 5.940109][ C0] try_one_irq+0x138/0x174 [ 5.944365][ C0] misrouted_irq+0x134/0x140 [ 5.948795][ C0] note_interrupt+0x1d0/0x30c [ 5.953311][ C0] handle_irq_event+0x13c/0x1d0 [ 5.958001][ C0] handle_fasteoi_irq+0xd4/0x260 [ 5.962779][ C0] __handle_domain_irq+0x88/0xf0 [ 5.967555][ C0] gic_handle_irq+0x9c/0x2f0 [ 5.971985][ C0] el1_irq+0xb8/0x140 [ 5.975807][ C0] __setup_irq+0x3dc/0x7cc [ 5.980064][ C0] request_threaded_irq+0xf4/0x1b4 [ 5.985015][ C0] devm_request_threaded_irq+0x80/0x100 [ 5.990400][ C0] dwc2_driver_probe+0x1b8/0x6b0 [ 5.995178][ C0] platform_drv_probe+0x5c/0xb0 [ 5.999868][ C0] really_probe+0xf8/0x51c [ 6.004125][ C0] driver_probe_device+0xfc/0x170 [ 6.008989][ C0] device_driver_attach+0xc8/0xd0 [ 6.013853][ C0] __driver_attach+0xe8/0x1b0 [ 6.018369][ C0] bus_for_each_dev+0x7c/0xdc [ 6.022886][ C0] driver_attach+0x2c/0x3c [ 6.027143][ C0] bus_add_driver+0xdc/0x240 [ 6.031573][ C0] driver_register+0x80/0x13c [ 6.036090][ C0] __platform_driver_register+0x50/0x5c [ 6.041476][ C0] dwc2_platform_driver_init+0x24/0x30 [ 6.046774][ C0] do_one_initcall+0x50/0x25c [ 6.051291][ C0] do_initcall_level+0xe4/0xfc [ 6.055894][ C0] do_initcalls+0x80/0xa4 [ 6.060064][ C0] kernel_init_freeable+0x198/0x240 [ 6.065102][ C0] kernel_init+0x1c/0x12c Signed-off-by: Shawn Shao <shawn.shao@jaguarmicro.com> Link: https://lore.kernel.org/r/20240830031709.134-1-shawn.shao@jaguarmicro.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-09-03usb: dwc3: xilinx: simplify with dev_err_probeKrzysztof Kozlowski1-5/+2
Use dev_err_probe() to make the error paths a bit simpler. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/20240814-b4-cleanup-h-of-node-put-usb-v1-11-95481b9682bc@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-09-03usb: dwc3: rtk: return directly and simplify with devm_platform_ioremap_resourceKrzysztof Kozlowski1-25/+8
Use devm_platform_ioremap_resource() wrapper instead of two calls, which together with returning directly instead of useless goto, allows to nicely simplify the probe() function. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/20240814-b4-cleanup-h-of-node-put-usb-v1-10-95481b9682bc@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-09-03usb: dwc3: rtk: use scoped device node handling to simplify error pathsKrzysztof Kozlowski1-12/+7
Obtain the device node reference with scoped/cleanup.h to reduce error handling and make the code a bit simpler. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/20240814-b4-cleanup-h-of-node-put-usb-v1-9-95481b9682bc@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-09-03usb: dwc3: qcom: simplify with devm_platform_ioremap_resourceKrzysztof Kozlowski1-4/+1
Use devm_platform_ioremap_resource() wrapper instead of two calls. This allows also dropping local 'res' variable. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/20240814-b4-cleanup-h-of-node-put-usb-v1-8-95481b9682bc@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-09-03usb: dwc3: qcom: use scoped device node handling to simplify error pathsKrzysztof Kozlowski1-6/+5
Obtain the device node reference with scoped/cleanup.h to reduce error handling and make the code a bit simpler. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/20240814-b4-cleanup-h-of-node-put-usb-v1-7-95481b9682bc@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-09-03usb: dwc3: imx8mp: use scoped device node handling to simplify error pathsKrzysztof Kozlowski1-12/+8
Obtain the device node reference with scoped/cleanup.h to reduce error handling and make the code a bit simpler. Scoped/cleanup.h coding style expects variable declaration with initialization, so the of_get_compatible_child() call has to be moved earlier, before any goto jumps happen. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Link: https://lore.kernel.org/r/20240814-b4-cleanup-h-of-node-put-usb-v1-6-95481b9682bc@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-09-03usb: dwc3: imx8mp: simplify with dev_err_probeKrzysztof Kozlowski1-10/+6
Use dev_err_probe() to make the error paths a bit simpler. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Link: https://lore.kernel.org/r/20240814-b4-cleanup-h-of-node-put-usb-v1-5-95481b9682bc@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-09-03usb: dwc3: imx8mp: simplify with devm_clk_get_enabledKrzysztof Kozlowski1-27/+5
Use devm_clk_get_enabled() to drop clock preparing and handling from error and remove paths. This makes the code a bit simpler. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Frank Li <Frank.Li@nxp.com> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/20240814-b4-cleanup-h-of-node-put-usb-v1-4-95481b9682bc@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-09-03usb: dwc3: st: simplify pdev->dev usageKrzysztof Kozlowski1-2/+2
The probe() function already stores '&pdev->dev' in local 'dev' variable. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/20240814-b4-cleanup-h-of-node-put-usb-v1-3-95481b9682bc@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-09-03usb: dwc3: st: simplify with dev_err_probeKrzysztof Kozlowski1-6/+5
Use dev_err_probe() to make the error paths a bit simpler. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/20240814-b4-cleanup-h-of-node-put-usb-v1-2-95481b9682bc@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-09-03usb: dwc3: st: use scoped device node handling to simplify error pathsKrzysztof Kozlowski1-14/+11
Obtain the device node reference with scoped/cleanup.h to reduce error handling and make the code a bit simpler. Scoped/cleanup.h coding style expects variable declaration with initialization, so the of_get_compatible_child() call has to be moved earlier, before any goto jumps happen. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Link: https://lore.kernel.org/r/20240814-b4-cleanup-h-of-node-put-usb-v1-1-95481b9682bc@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-09-03usb-storage: Constify struct usb_device_id and us_unusual_devChristophe JAILLET13-25/+25
'struct usb_device_id' and 'struct us_unusual_dev' are not modified in these drivers. Constifying these structures moves some data to a read-only section, so increase overall security, especially when the structure holds some function pointers (which is the case for struct us_unusual_dev). On a x86_64, with allmodconfig, as an example: Before: ====== text data bss dec hex filename 25249 4261 896 30406 76c6 drivers/usb/storage/alauda.o 3969 672 360 5001 1389 drivers/usb/storage/cypress_atacb.o After: ===== text data bss dec hex filename 25461 4041 896 30398 76be drivers/usb/storage/alauda.o 4225 400 360 4985 1379 drivers/usb/storage/cypress_atacb.o Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/b1b75a2a64b1f6cfad2a611f71393f281178fd3f.1724507157.git.christophe.jaillet@wanadoo.fr Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-09-03usb: chipidea: udc: enable suspend interrupt after usb resetXu Yang1-1/+7
Currently, suspend interrupt is enabled before pullup enable operation. This will cause a suspend interrupt assert right after pullup DP. This suspend interrupt is meaningless, so this will ignore such interrupt by enable it after usb reset completed. Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Acked-by: Peter Chen <peter.chen@kernel.org> Link: https://lore.kernel.org/r/20240823073832.1702135-1-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-09-03Merge 6.11-rc6 into usb-nextGreg Kroah-Hartman13-25/+101
We need the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-09-01Merge tag 'usb-6.11-rc6' of ↵Linus Torvalds12-14/+69
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are some small USB fixes for 6.11-rc6. Included in here are: - dwc3 driver fixes for reported issues - MAINTAINER file update, marking a driver as unsupported :( - cdnsp driver fixes - USB gadget driver fix - USB sysfs fix - other tiny fixes - new device ids for usb serial driver All of these have been in linux-next this week with no reported issues" * tag 'usb-6.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: USB: serial: option: add MeiG Smart SRM825L usb: cdnsp: fix for Link TRB with TC usb: dwc3: st: add missing depopulate in probe error path usb: dwc3: st: fix probed platform device ref count on probe error path usb: dwc3: ep0: Don't reset resource alloc flag (including ep0) usb: core: sysfs: Unmerge @usb3_hardware_lpm_attr_group in remove_power_attributes() usb: typec: fsa4480: Relax CHIP_ID check usb: dwc3: xilinx: add missing depopulate in probe error path usb: dwc3: omap: add missing depopulate in probe error path dt-bindings: usb: microchip,usb2514: Fix reference USB device schema usb: gadget: uvc: queue pump work in uvcg_video_enable() cdc-acm: Add DISABLE_ECHO quirk for GE HealthCare UI Controller usb: cdnsp: fix incorrect index in cdnsp_get_hw_deq function usb: dwc3: core: Prevent USB core invalid event buffer address access MAINTAINERS: Mark UVC gadget driver as orphan
2024-08-30Merge tag 'usb-serial-6.11-rc6' of ↵Greg Kroah-Hartman1-0/+5
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus Johan writes: USB-serial device id for 6.11-rc6 Here's a new modem device id. This one has been in linux-next with no reported issues. * tag 'usb-serial-6.11-rc6' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: USB: serial: option: add MeiG Smart SRM825L
2024-08-28Merge tag 'qcom-drivers-fixes-for-6.11' of ↵Arnd Bergmann1-11/+32
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes Qualcomm driver fixes for v6.11 This corrects the tzmem virt-to-phys conversion, which caused issues for the uefisecapp implementation of EFI variable access. SDM670 is excluded from tzmem usage due to reported issues. The SCM get wait queue context call is corrected to be marked ATOMIC and some dead code in qseecom, following the tzmem conversion, is removed. The memory backing command DB is remapped writecombined, to avoid XPU violations when Linux runs without the Qualcomm hypervisor. Two compile fixes are added for pd-mapper, and the broken reference count is corrected, to make pd-mapper deal with remoteprocs going away. In pmic_glink a race condition where the client callbacks might be called before we returned the client handle is corrected. The broken conditions for when to signal that the firmware is going down is also corrected. In the pmic_glink UCSI driver, the ucsi_unregister() is moved out of the pdr callback, as this is being invoked in atomic context. Konrad's email address is updated in MAINTAINERS, and related mailmap entries are added. * tag 'qcom-drivers-fixes-for-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: soc: qcom: pd-mapper: Fix singleton refcount firmware: qcom: tzmem: disable sdm670 platform soc: qcom: pmic_glink: Actually communicate when remote goes down usb: typec: ucsi: Move unregister out of atomic section soc: qcom: pmic_glink: Fix race during initialization firmware: qcom: qseecom: remove unused functions firmware: qcom: tzmem: fix virtual-to-physical address conversion firmware: qcom: scm: Mark get_wq_ctx() as atomic call MAINTAINERS: Update Konrad Dybcio's email address mailmap: Add an entry for Konrad Dybcio soc: qcom: pd-mapper: mark qcom_pdm_domains as __maybe_unused soc: qcom: cmd-db: Map shared memory as WC, not WB soc: qcom: pd-mapper: Depend on ARCH_QCOM || COMPILE_TEST Link: https://lore.kernel.org/r/20240826145209.1646159-1-andersson@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-08-27USB: serial: option: add MeiG Smart SRM825LZHANG Yuntian1-0/+5
Add support for MeiG Smart SRM825L which is based on Qualcomm 315 chip. T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=5000 MxCh= 0 D: Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1 P: Vendor=2dee ProdID=4d22 Rev= 4.14 S: Manufacturer=MEIG S: Product=LTE-A Module S: SerialNumber=6f345e48 C:* #Ifs= 6 Cfg#= 1 Atr=80 MxPwr=896mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=05(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=88(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=8e(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=0f(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms Signed-off-by: ZHANG Yuntian <yt@radxa.com> Link: https://lore.kernel.org/0041DFA5200EFB1B+20240803074619.563116-1-yt@radxa.com/ Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2024-08-26USB: serial: kobil_sct: restore initial terminal settingsJohan Hovold1-2/+1
Commit 6a6c8b362be3 ("usb, kobil: Sort out some bogus tty handling") intended to fix and clean up the device-specific initial terminal settings but instead confused the termios input and local control flags and re-enabled ICRNL and IXON. Drop the bogus masking of l-flags from the default i-flags (which has no effect) and restore the original device-specific i-flags. Fixes: 6a6c8b362be3 ("usb, kobil: Sort out some bogus tty handling") Signed-off-by: Johan Hovold <johan@kernel.org>
2024-08-26USB: serial: drop driver owner initializationKrzysztof Kozlowski52-69/+0
Core in usb_serial_register_drivers() already sets the .owner, so driver does not need to. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2024-08-26USB: serial: set driver owner when registering driversKrzysztof Kozlowski1-5/+7
Modules registering drivers with usb_serial_register_drivers() might forget to set .owner field. The field is used by some of other kernel parts for reference counting (try_module_get()), so it is expected that drivers will set it. Solve the problem by moving this task away from the drivers to the core USB serial code, just like we did for platform_driver in commit 9447057eaff8 ("platform_device: use a macro instead of platform_driver_register"). Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> [ johan: amend commit summary ] Signed-off-by: Johan Hovold <johan@kernel.org>
2024-08-25usb: roles: add lockdep class key to struct usb_role_switchAmit Sunil Dhamne1-0/+9
There can be multiple role switch devices running on a platform. Given that lockdep is not capable of differentiating between locks of different instances, false positive warnings for circular locking are reported. To prevent this, register unique lockdep key for each of the individual instances. Signed-off-by: Amit Sunil Dhamne <amitsd@google.com> Reviewed-by: Badhri Jagan Sridharan <badhri@google.com> Link: https://lore.kernel.org/r/20240822223717.253433-1-amitsd@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-25usb: ehci-brcm: fix module autoloadingLiao Chen1-0/+1
Add MODULE_DEVICE_TABLE(), so modules could be properly autoloaded based on the alias from of_device_id table. Signed-off-by: Liao Chen <liaochen4@huawei.com> Acked-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20240822130113.164644-5-liaochen4@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-25usb: typec: fix module autoloadingLiao Chen1-0/+1
Add MODULE_DEVICE_TABLE(), so modules could be properly autoloaded based on the alias from of_device_id table. Signed-off-by: Liao Chen <liaochen4@huawei.com> Link: https://lore.kernel.org/r/20240822130113.164644-4-liaochen4@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-25usb: misc: brcmstb-usb-pinmap: fix module autoloadingLiao Chen1-0/+1
Add MODULE_DEVICE_TABLE(), so modules could be properly autoloaded based on the alias from of_device_id table. Signed-off-by: Liao Chen <liaochen4@huawei.com> Acked-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20240822130113.164644-3-liaochen4@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-25usb: phy: phy-gpio-vbus-usb: fix module autoloadingLiao Chen1-0/+1
Add MODULE_DEVICE_TABLE(), so modules could be properly autoloaded based on the alias from of_device_id table. Signed-off-by: Liao Chen <liaochen4@huawei.com> Link: https://lore.kernel.org/r/20240822130113.164644-2-liaochen4@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-24usb: cdnsp: fix for Link TRB with TCPawel Laszczak2-0/+31
Stop Endpoint command on LINK TRB with TC bit set to 1 causes that internal cycle bit can have incorrect state after command complete. In consequence empty transfer ring can be incorrectly detected when EP is resumed. NOP TRB before LINK TRB avoid such scenario. Stop Endpoint command is then on NOP TRB and internal cycle bit is not changed and have correct value. Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver") cc: <stable@vger.kernel.org> Signed-off-by: Pawel Laszczak <pawell@cadence.com> Reviewed-by: Peter Chen <peter.chen@kernel.org> Link: https://lore.kernel.org/r/PH7PR07MB953878279F375CCCE6C6F40FDD8E2@PH7PR07MB9538.namprd07.prod.outlook.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-23usb: typec: ucsi: Remove useless error check from ucsi_read_error()Heikki Krogerus1-3/+0
If the GET_ERROR_STATUS command fails, ucsi_read_error() can not reach the condition where the CCI error bit is checked, because ucsi_run_command() has already checked that bit and returned an error. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20240816135859.3499351-7-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-23usb: typec: ucsi: Call CANCEL from single locationHeikki Krogerus1-13/+4
The command cancellation can be done right after detecting that the PPM is busy. There is no need to do it separately in ucsi_read_error() and ucsi_send_command_common(). Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20240816135859.3499351-6-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-23usb: typec: ucsi: Common function for the GET_PD_MESSAGE commandHeikki Krogerus2-77/+27
So far that command was only used to read the response to the Discover Identity Request, but it is handled with two separate functions, which is not really necessary. Squashing the command execution into a single function. That function can now also be used to read other messages on top of the Request Identity response. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20240816135859.3499351-5-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-23usb: typec: ucsi: Only assign the identity structure if the PPM supports itHeikki Krogerus1-2/+4
This will make sure that the identity sysfs attribute files are kept hidden if the UCSI interface doesn't support reading the USB Power Delivery messages. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Link: https://lore.kernel.org/r/20240816135859.3499351-4-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-23usb: typec: ucsi: Don't truncate the readsHeikki Krogerus2-6/+4
That may silently corrupt the data. Instead, failing attempts to read more than the interface can handle. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Link: https://lore.kernel.org/r/20240816135859.3499351-3-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-23usb: typec: ucsi: Remove unused fields from struct ucsi_connector_statusHeikki Krogerus1-25/+2
The new fields are valid only with the new UCSI versions. They are at offsets that go beyond the MAX_DATA_LENGTH (16 bytes) with the older UCSI versions. That has not caused any problems before because nothing uses those new fields yet. Because they are not used yet, dropping them for now. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20240816135859.3499351-2-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-22usb: dwc3: st: add missing depopulate in probe error pathKrzysztof Kozlowski1-1/+4
Depopulate device in probe error paths to fix leak of children resources. Fixes: f83fca0707c6 ("usb: dwc3: add ST dwc3 glue layer to manage dwc3 HC") Cc: stable@vger.kernel.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/20240814093957.37940-2-krzysztof.kozlowski@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-22usb: dwc3: st: fix probed platform device ref count on probe error pathKrzysztof Kozlowski1-8/+3
The probe function never performs any paltform device allocation, thus error path "undo_platform_dev_alloc" is entirely bogus. It drops the reference count from the platform device being probed. If error path is triggered, this will lead to unbalanced device reference counts and premature release of device resources, thus possible use-after-free when releasing remaining devm-managed resources. Fixes: f83fca0707c6 ("usb: dwc3: add ST dwc3 glue layer to manage dwc3 HC") Cc: stable@vger.kernel.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Link: https://lore.kernel.org/r/20240814093957.37940-1-krzysztof.kozlowski@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-22usb: dwc3: ep0: Don't reset resource alloc flag (including ep0)Michael Grzeschik1-1/+2
The DWC3_EP_RESOURCE_ALLOCATED flag ensures that the resource of an endpoint is only assigned once. Unless the endpoint is reset, don't clear this flag. Otherwise we may set endpoint resource again, which prevents the driver from initiate transfer after handling a STALL or endpoint halt to the control endpoint. Commit f2e0eee47038 ("usb: dwc3: ep0: Don't reset resource alloc flag") was fixing the initial issue, but did this only for physical ep1. Since the function dwc3_ep0_stall_and_restart is resetting the flags for both physical endpoints, this also has to be done for ep0. Cc: stable@vger.kernel.org Fixes: b311048c174d ("usb: dwc3: gadget: Rewrite endpoint allocation flow") Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Link: https://lore.kernel.org/r/20240814-dwc3hwep0reset-v2-1-29e1d7d923ea@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-22usb: core: sysfs: Unmerge @usb3_hardware_lpm_attr_group in ↵Zijun Hu1-0/+1
remove_power_attributes() Device attribute group @usb3_hardware_lpm_attr_group is merged by add_power_attributes(), but it is not unmerged explicitly, fixed by unmerging it in remove_power_attributes(). Fixes: 655fe4effe0f ("usbcore: add sysfs support to xHCI usb3 hardware LPM") Cc: stable@vger.kernel.org Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com> Link: https://lore.kernel.org/r/20240820-sysfs_fix-v2-1-a9441487077e@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-22usb: typec: fsa4480: Relax CHIP_ID checkLuca Weiss1-1/+1
Some FSA4480-compatible chips like the OCP96011 used on Fairphone 5 return 0x00 from the CHIP_ID register. Handle that gracefully and only fail probe when the I2C read has failed. With this the dev_dbg will print 0 but otherwise continue working. [ 0.251581] fsa4480 1-0042: Found FSA4480 v0.0 (Vendor ID = 0) Cc: stable@vger.kernel.org Fixes: e885f5f1f2b4 ("usb: typec: fsa4480: Check if the chip is really there") Signed-off-by: Luca Weiss <luca.weiss@fairphone.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20240818-fsa4480-chipid-fix-v1-1-17c239435cf7@fairphone.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-22usb: dwc3: xilinx: add missing depopulate in probe error pathKrzysztof Kozlowski1-1/+6
Depopulate device in probe error paths to fix leak of children resources. Fixes: 53b5ff83d893 ("usb: dwc3: xilinx: improve error handling for PM APIs") Cc: stable@vger.kernel.org Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/20240816075409.23080-2-krzysztof.kozlowski@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-22usb: dwc3: omap: add missing depopulate in probe error pathKrzysztof Kozlowski1-1/+3
Depopulate device in probe error paths to fix leak of children resources. Fixes: ee249b455494 ("usb: dwc3: omap: remove IRQ_NOAUTOEN used with shared irq") Cc: stable@vger.kernel.org Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com> Link: https://lore.kernel.org/r/20240816075409.23080-1-krzysztof.kozlowski@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-22usb: gadget: uvc: queue pump work in uvcg_video_enable()Xu Yang1-0/+1
Since commit "6acba0345b68 usb:gadget:uvc Do not use worker thread to pump isoc usb requests", pump work could only be queued in uvc_video_complete() and uvc_v4l2_qbuf(). If VIDIOC_QBUF is executed before VIDIOC_STREAMON, we can only depend on uvc_video_complete() to queue pump work. However, this requires some free requests in req_ready list. If req_ready list is empty all the time, pump work will never be queued and video datas will never be pumped to usb controller. Actually, this situation could happen when run uvc-gadget with static image: $ ./uvc-gadget -i 1080p.jpg uvc.0 When capture image from this device, the user app will always block there. The issue is uvc driver has queued video buffer before streamon, but the req_ready list is empty all the time after streamon. This will queue pump work in uvcg_video_enable() to fill some request to req_ready list so the uvc device could work properly. Fixes: 6acba0345b68 ("usb:gadget:uvc Do not use worker thread to pump isoc usb requests") Cc: stable@vger.kernel.org Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Link: https://lore.kernel.org/r/20240814112537.2608949-1-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-22cdc-acm: Add DISABLE_ECHO quirk for GE HealthCare UI ControllerIan Ray1-0/+3
USB_DEVICE(0x1901, 0x0006) may send data before cdc_acm is ready, which may be misinterpreted in the default N_TTY line discipline. Signed-off-by: Ian Ray <ian.ray@gehealthcare.com> Acked-by: Oliver Neuku <oneukum@suse.com> Cc: stable <stable@kernel.org> Link: https://lore.kernel.org/r/20240814072905.2501-1-ian.ray@gehealthcare.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2025-05-16 16:28:03 +0000