| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Possibly the last PCI controller-based (i.e. not a soft/winmodem)
dial-up modem one can still buy.
Looks to have a stock XR17C154 PCI UART chip for communication, but for
some reason when provisioning the PCI IDs they swapped the vendor and
subvendor IDs. Otherwise this card would have worked out of the box.
Searching online, some folks seem to not have this issue and others do,
so it is possible only some batches of cards have this error.
Create a new macro to handle the switched IDs and add support here.
Signed-off-by: Andrew Davis <afd@ti.com>
Cc: stable <stable@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230420160209.28221-1-afd@ti.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
With faulty usb-storage devices, read/write can timeout, in that case
the SCSI layer will abort and re-issue the command. USB storage has no
internal timeout, it relies on SCSI layer aborting commands via
.eh_abort_handler() for non those responsive devices.
After two consecutive timeouts of the same command, SCSI layer calls
.eh_device_reset_handler(), without calling .eh_abort_handler() first.
With usb-storage, this causes a deadlock:
-> .eh_device_reset_handler
-> device_reset
-> mutex_lock(&(us->dev_mutex));
mutex already by usb_stor_control_thread(), which is waiting for
command completion:
-> usb_stor_control_thread (mutex taken here)
-> usb_stor_invoke_transport
-> usb_stor_Bulk_transport
-> usb_stor_bulk_srb
-> usb_stor_bulk_transfer_sglist
-> usb_sg_wait
Make sure we cancel any pending command in .eh_device_reset_handler()
to avoid this.
Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
Cc: linux-usb@vger.kernel.org
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/all/ZEllnjMKT8ulZbJh@sakura/
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20230505114759.1189741-1-mbizon@freebox.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This was refactored recently and the "ret = " was accidentally deleted
so the errors aren't checked.
Fixes: 1d72fab47656 ("USB: dwc3: refactor phy handling")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/d0c5a04f-deee-4ebe-9b0b-dc5492564519@kili.mountain
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We need to cancel the delayed workqueue if it is being used
else it will cause paging request fault during module removal.
Fixes: 0d6a119cecd7 ("usb: typec: tps6598x: Add support for polling interrupts status")
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20230421101720.34318-1-rogerq@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The CDC-ECM specification [1] requires to send the host MAC address as
an uppercase hexadecimal string in chapter "5.4 Ethernet Networking
Functional Descriptor":
The Unicode character is chosen from the set of values 30h through
39h and 41h through 46h (0-9 and A-F).
However, snprintf(.., "%pm", ..) generates a lowercase MAC address
string. While most host drivers are tolerant to this, UsbNcm.sys on
Windows 10 is not. Instead it uses a different MAC address with all
bytes set to zero including and after the first byte containing a
lowercase letter. On Windows 11 Microsoft fixed it, but apparently they
did not backport the fix.
This change fixes the issue by upper-casing the MAC to comply with the
specification.
[1]: https://www.usb.org/document-library/class-definitions-communication-devices-12, file ECM120.pdf
Fixes: bcd4a1c40bee ("usb: gadget: u_ether: construct with default values and add setters/getters")
Cc: stable@vger.kernel.org
Signed-off-by: Konrad Gräfe <k.graefe@gateware.de>
Link: https://lore.kernel.org/r/20230505143640.443014-1-k.graefe@gateware.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch fixes negative indexing of buf array in pin_assignment_show
when get_current_pin_assignments returns 0 i.e. no compatible pin
assignments are found.
BUG: KASAN: use-after-free in pin_assignment_show+0x26c/0x33c
...
Call trace:
dump_backtrace+0x110/0x204
dump_stack_lvl+0x84/0xbc
print_report+0x358/0x974
kasan_report+0x9c/0xfc
__do_kernel_fault+0xd4/0x2d4
do_bad_area+0x48/0x168
do_tag_check_fault+0x24/0x38
do_mem_abort+0x6c/0x14c
el1_abort+0x44/0x68
el1h_64_sync_handler+0x64/0xa4
el1h_64_sync+0x78/0x7c
pin_assignment_show+0x26c/0x33c
dev_attr_show+0x50/0xc0
Fixes: 0e3bb7d6894d ("usb: typec: Add driver for DisplayPort alternate mode")
Cc: stable@vger.kernel.org
Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20230508214443.893436-1-badhri@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This reverts commit 0db213ea8eed5534a5169e807f28103cbc9d23df.
It introduces an issues with configuring the USB gadget hangs forever
on multiple Qualcomm and NXP i.MX SoC at least.
Cc: stable@vger.kernel.org
Fixes: 0db213ea8eed ("usb: gadget: udc: core: Invoke usb_gadget_connect only when started")
Reported-by: Stephan Gerhold <stephan@gerhold.net>
Reported-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://lore.kernel.org/all/ZF4BvgsOyoKxdPFF@francesco-nb.int.toradex.com/
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://lore.kernel.org/r/20230512131435.205464-3-francesco@dolcini.it
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This reverts commit a3afbf5cc887fc3401f012fe629810998ed61859.
This depends on commit 0db213ea8eed ("usb: gadget: udc: core: Invoke
usb_gadget_connect only when started") that introduces a regression,
revert it till the issue is fixed.
Cc: stable@vger.kernel.org
Reported-by: Stephan Gerhold <stephan@gerhold.net>
Reported-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://lore.kernel.org/all/ZF4BvgsOyoKxdPFF@francesco-nb.int.toradex.com/
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://lore.kernel.org/r/20230512131435.205464-2-francesco@dolcini.it
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When the dwc3 device is runtime suspended, various required clocks are in
disabled state and it is not guaranteed that access to any registers would
work. Depending on the SoC glue, a register read could be as benign as
returning 0 or be fatal enough to hang the system.
In order to prevent such scenarios of fatal errors, make sure to resume
dwc3 then allow the function to proceed.
Fixes: 72246da40f37 ("usb: Introduce DesignWare USB3 DRD Driver")
Cc: stable@vger.kernel.org #3.2: 30332eeefec8: debugfs: regset32: Add Runtime PM support
Signed-off-by: Udipto Goswami <quic_ugoswami@quicinc.com>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20230509144836.6803-1-quic_ugoswami@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
OverCurrent condition is not standardized in the UHCI spec.
Zhaoxin UHCI controllers report OverCurrent bit active off.
In order to handle OverCurrent condition correctly, the uhci-hcd
driver needs to be told to expect the active-off behavior.
Suggested-by: Alan Stern <stern@rowland.harvard.edu>
Cc: stable@vger.kernel.org
Signed-off-by: Weitao Wang <WeitaoWang-oc@zhaoxin.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20230423105952.4526-1-WeitaoWang-oc@zhaoxin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When work in gadget mode, currently driver doesn't update software level
link_state correctly as link state change event is not enabled for most
devices, in function dwc3_gadget_suspend_interrupt(), it will only pass
suspend event to UDC core when software level link state changes, so when
interrupt generated in sequences of suspend -> reset -> conndone ->
suspend, link state is not updated during reset and conndone, so second
suspend interrupt event will not pass to UDC core.
Remove link_state compare in dwc3_gadget_suspend_interrupt() and add a
suspended flag to replace the compare function.
Fixes: 799e9dc82968 ("usb: dwc3: gadget: conditionally disable Link State change events")
Cc: stable <stable@kernel.org>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Signed-off-by: Linyu Yuan <quic_linyyuan@quicinc.com>
Link: https://lore.kernel.org/r/20230512004524.31950-1-quic_linyyuan@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Prevent -ETIMEDOUT error on .suspend().
e.g. If gadget driver is loaded and we are connected to a USB host,
all transfers must be stopped before stopping the controller else
we will not get a clean stop i.e. dwc3_gadget_run_stop() will take
several seconds to complete and will return -ETIMEDOUT.
Handle error cases properly in dwc3_gadget_suspend().
Simplify dwc3_gadget_resume() by using the introduced helper function.
Fixes: 9f8a67b65a49 ("usb: dwc3: gadget: fix gadget suspend/resume")
Cc: stable@vger.kernel.org
Suggested-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20230503110048.30617-1-rogerq@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The syzbot fuzzer found a problem in the usbtmc driver: When a user
submits an ioctl for a 0-length control transfer, the driver does not
check that the direction is set to OUT:
------------[ cut here ]------------
usb 3-1: BOGUS control dir, pipe 80000b80 doesn't match bRequestType fd
WARNING: CPU: 0 PID: 5100 at drivers/usb/core/urb.c:411 usb_submit_urb+0x14a7/0x1880 drivers/usb/core/urb.c:411
Modules linked in:
CPU: 0 PID: 5100 Comm: syz-executor428 Not tainted 6.3.0-syzkaller-12049-g58390c8ce1bd #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/14/2023
RIP: 0010:usb_submit_urb+0x14a7/0x1880 drivers/usb/core/urb.c:411
Code: 7c 24 40 e8 1b 13 5c fb 48 8b 7c 24 40 e8 21 1d f0 fe 45 89 e8 44 89 f1 4c 89 e2 48 89 c6 48 c7 c7 e0 b5 fc 8a e8 19 c8 23 fb <0f> 0b e9 9f ee ff ff e8 ed 12 5c fb 0f b6 1d 12 8a 3c 08 31 ff 41
RSP: 0018:ffffc90003d2fb00 EFLAGS: 00010282
RAX: 0000000000000000 RBX: ffff8880789e9058 RCX: 0000000000000000
RDX: ffff888029593b80 RSI: ffffffff814c1447 RDI: 0000000000000001
RBP: ffff88801ea742f8 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000001 R11: 0000000000000001 R12: ffff88802915e528
R13: 00000000000000fd R14: 0000000080000b80 R15: ffff8880222b3100
FS: 0000555556ca63c0(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f9ef4d18150 CR3: 0000000073e5b000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
usb_start_wait_urb+0x101/0x4b0 drivers/usb/core/message.c:58
usb_internal_control_msg drivers/usb/core/message.c:102 [inline]
usb_control_msg+0x320/0x4a0 drivers/usb/core/message.c:153
usbtmc_ioctl_request drivers/usb/class/usbtmc.c:1954 [inline]
usbtmc_ioctl+0x1b3d/0x2840 drivers/usb/class/usbtmc.c:2097
To fix this, we must override the direction in the bRequestType field
of the control request structure when the length is 0.
Reported-and-tested-by: syzbot+ce77725b89b7bd52425c@syzkaller.appspotmail.com
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/linux-usb/000000000000716a3705f9adb8ee@google.com/
CC: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/ede1ee02-b718-49e7-a44c-51339fec706b@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add a return to the error path when cxl_cdat_read_table() fails. Current
code continues with the table pointer points to freed memory.
Fixes: 7a877c923995 ("cxl/pci: Simplify CDAT retrieval error path")
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Link: https://lore.kernel.org/r/168382793506.3510737.4792518576623749076.stgit@djiang5-mobl3
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
In dvb_demux.c, some logics exist which compare the expected
continuity counter and the real continuity counter. If they
are not matched each other, both of the expected continuity
counter and the real continuity counter should be printed.
But there exists a bug that the expected continuity counter
is not correctly printed. The expected continuity counter is
replaced with the real countinuity counter + 1 so that
the epected continuity counter is not correclty printed.
This is wrong. This bug is fixed.
Link: https://lore.kernel.org/linux-media/20230305212519.499-1-yongsuyoo0215@gmail.com
Signed-off-by: YongSu Yoo <yongsuyoo0215@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Now that DVB_CORE can be a loadable module, pvrusb2 can run into
a link error:
ld.lld: error: undefined symbol: dvb_module_probe
>>> referenced by pvrusb2-devattr.c
>>> drivers/media/usb/pvrusb2/pvrusb2-devattr.o:(pvr2_lgdt3306a_attach) in archive vmlinux.a
ld.lld: error: undefined symbol: dvb_module_release
>>> referenced by pvrusb2-devattr.c
>>> drivers/media/usb/pvrusb2/pvrusb2-devattr.o:(pvr2_dual_fe_attach) in archive vmlinux.a
Refine the Kconfig dependencies to avoid this case.
Link: https://lore.kernel.org/linux-media/20230117171055.2714621-1-arnd@kernel.org
Fixes: 7655c342dbc4 ("media: Kconfig: Make DVB_CORE=m possible when MEDIA_SUPPORT=y")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
In case of CONFIG_BLKDEV_UBLK_LEGACY_OPCODES, type of cmd opcode could
be 0 or 'u'; and type can only be 'u' if CONFIG_BLKDEV_UBLK_LEGACY_OPCODES
isn't set.
So fix the wrong check.
Fixes: 2d786e66c966 ("block: ublk: switch to ioctl command encoding")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20230505153142.1258336-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Since flush bios are implemented as writes with no data and
the preflush flag per Christoph's comment [1].
And we need to change it in rnbd accordingly. Otherwise, I
got splatting when create fs from rnbd client.
[ 464.028545] ------------[ cut here ]------------
[ 464.028553] WARNING: CPU: 0 PID: 65 at block/blk-core.c:751 submit_bio_noacct+0x32c/0x5d0
[ ... ]
[ 464.028668] CPU: 0 PID: 65 Comm: kworker/0:1H Tainted: G OE 6.4.0-rc1 #9
[ 464.028671] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.15.0-0-g2dd4b9b-rebuilt.opensuse.org 04/01/2014
[ 464.028673] Workqueue: ib-comp-wq ib_cq_poll_work [ib_core]
[ 464.028717] RIP: 0010:submit_bio_noacct+0x32c/0x5d0
[ 464.028720] Code: 03 0f 85 51 fe ff ff 48 8b 43 18 8b 88 04 03 00 00 85 c9 0f 85 3f fe ff ff e9 be fd ff ff 0f b6 d0 3c 0d 74 26 83 fa 01 74 21 <0f> 0b b8 0a 00 00 00 e9 56 fd ff ff 4c 89 e7 e8 70 a1 03 00 84 c0
[ 464.028722] RSP: 0018:ffffaf3680b57c68 EFLAGS: 00010202
[ 464.028724] RAX: 0000000000060802 RBX: ffffa09dcc18bf00 RCX: 0000000000000000
[ 464.028726] RDX: 0000000000000002 RSI: 0000000000000000 RDI: ffffa09dde081d00
[ 464.028727] RBP: ffffaf3680b57c98 R08: ffffa09dde081d00 R09: ffffa09e38327200
[ 464.028729] R10: 0000000000000000 R11: 0000000000000000 R12: ffffa09dde081d00
[ 464.028730] R13: ffffa09dcb06e1e8 R14: 0000000000000000 R15: 0000000000200000
[ 464.028733] FS: 0000000000000000(0000) GS:ffffa09e3bc00000(0000) knlGS:0000000000000000
[ 464.028735] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 464.028736] CR2: 000055a4e8206c40 CR3: 0000000119f06000 CR4: 00000000003506f0
[ 464.028738] Call Trace:
[ 464.028740] <TASK>
[ 464.028746] submit_bio+0x1b/0x80
[ 464.028748] rnbd_srv_rdma_ev+0x50d/0x10c0 [rnbd_server]
[ 464.028754] ? percpu_ref_get_many.constprop.0+0x55/0x140 [rtrs_server]
[ 464.028760] ? __this_cpu_preempt_check+0x13/0x20
[ 464.028769] process_io_req+0x1dc/0x450 [rtrs_server]
[ 464.028775] rtrs_srv_inv_rkey_done+0x67/0xb0 [rtrs_server]
[ 464.028780] __ib_process_cq+0xbc/0x1f0 [ib_core]
[ 464.028793] ib_cq_poll_work+0x2b/0xa0 [ib_core]
[ 464.028804] process_one_work+0x2a9/0x580
[1]. https://lore.kernel.org/all/ZFHgefWofVt24tRl@infradead.org/
Signed-off-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20230512034631.28686-1-guoqing.jiang@linux.dev
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The debugfs_create_dir function returns ERR_PTR in case of error, and the
only correct way to check if an error occurred is 'IS_ERR' inline function.
This patch will replace the null-comparison with IS_ERR.
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Link: https://lore.kernel.org/r/20230512130533.98709-1-ivan.orlov0322@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394
Pull firewire fix from Takashi Sakamoto:
- fix early release of request packet
* tag 'firewire-fixes-6.4-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
firewire: net: fix unexpected release of object for asynchronous request packet
|
|
Minor fix to reset the info field to NULL in case of error.
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
By default we would not want RXFCS and RXALL features enabled as they are
mainly intended for debugging purposes. This does not stop users from
enabling them later on as needed.
Fixes: 8e57daf70671 ("sfc_ef100: RX path for EF100")
Signed-off-by: Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com>
Co-developed-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Reviewed-by: Martin Habets <habetsm.xilinx@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add typical resolution for Full-HD monitors.
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
As not all ICE_TX_FLAGS_* fit in current 16-bit limited
tx_flags field that was introduced in the Fixes commit,
VLAN-related information would be discarded completely.
As such, creating a vlan and trying to run ping through
would result in no traffic passing.
Fix that by refactoring tx_flags variable into flags only and
a separate variable that holds VLAN ID. As there is some space left,
type variable can fit between those two. Pahole reports no size
change to ice_tx_buf struct.
Fixes: aa1d3faf71a6 ("ice: Robustify cleaning/completing XDP Tx buffers")
Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The ieee80211_ops::sta_rc_update must be atomic, because
ieee80211_chan_bw_change() holds rcu_read lock while calling
drv_sta_rc_update(), so create a work to do original things.
Voluntary context switch within RCU read-side critical section!
WARNING: CPU: 0 PID: 4621 at kernel/rcu/tree_plugin.h:318
rcu_note_context_switch+0x571/0x5d0
CPU: 0 PID: 4621 Comm: kworker/u16:2 Tainted: G W OE
Workqueue: phy3 ieee80211_chswitch_work [mac80211]
RIP: 0010:rcu_note_context_switch+0x571/0x5d0
Call Trace:
<TASK>
__schedule+0xb0/0x1460
? __mod_timer+0x116/0x360
schedule+0x5a/0xc0
schedule_timeout+0x87/0x150
? trace_raw_output_tick_stop+0x60/0x60
wait_for_completion_timeout+0x7b/0x140
usb_start_wait_urb+0x82/0x160 [usbcore
usb_control_msg+0xe3/0x140 [usbcore
rtw_usb_read+0x88/0xe0 [rtw_usb
rtw_usb_read8+0xf/0x10 [rtw_usb
rtw_fw_send_h2c_command+0xa0/0x170 [rtw_core
rtw_fw_send_ra_info+0xc9/0xf0 [rtw_core
drv_sta_rc_update+0x7c/0x160 [mac80211
ieee80211_chan_bw_change+0xfb/0x110 [mac80211
ieee80211_change_chanctx+0x38/0x130 [mac80211
ieee80211_vif_use_reserved_switch+0x34e/0x900 [mac80211
ieee80211_link_use_reserved_context+0x88/0xe0 [mac80211
ieee80211_chswitch_work+0x95/0x170 [mac80211
process_one_work+0x201/0x410
worker_thread+0x4a/0x3b0
? process_one_work+0x410/0x410
kthread+0xe1/0x110
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x1f/0x30
</TASK>
Cc: stable@vger.kernel.org
Fixes: c1edc86472fc ("rtw88: add ieee80211:sta_rc_update ops")
Reported-by: Larry Finger <Larry.Finger@lwfinger.net>
Link: https://lore.kernel.org/linux-wireless/f1e31e8e-f84e-3791-50fb-663a83c5c6e9@lwfinger.net/T/#t
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Tested-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230508085429.46653-1-pkshih@realtek.com
|
|
Though SER can recover this case, traffic can get stuck for a while. Fix it
by adjusting page quota to avoid hardware access null page of CMAC/DMAC.
Fixes: a1cb097168fa ("wifi: rtw89: 8852b: configure DLE mem")
Fixes: 3e870b481733 ("wifi: rtw89: 8852b: add HFC quota arrays")
Cc: stable@vger.kernel.org
Tested-by: Larry Finger <Larry.Finger@lwfinger.net>
Link: https://github.com/lwfinger/rtw89/issues/226#issuecomment-1520776761
Link: https://github.com/lwfinger/rtw89/issues/240
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230426034737.24870-1-pkshih@realtek.com
|
|
The stats->tx_bytes shall subtract retry byte from tx byte.
Fixes: 43eaa3689507 ("wifi: mt76: add PPDU based TxS support for WED device")
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/b3cd45596943cf5a06b2e08e2fe732ab0b51311b.1682285873.git.ryder.lee@mediatek.com
|
|
To avoid sparse warning:
sparse: warning: invalid assignment: |=
sparse: left side has type restricted __le32
sparse: right side has type unsigned lon
Fixes: 15ee62e73705 ("wifi: mt76: mt7996: enable BSS_CHANGED_BASIC_RATES support")
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/16fa938373e3b145cb07a2c98d2428fea2abadba.1682285873.git.ryder.lee@mediatek.com
|
|
The patch corrects the NFP_NET_MAX_DSCP definition in the main.h file.
The incorrect definition result DSCP bits not being mapped properly when
DCB is set. When NFP_NET_MAX_DSCP was defined as 4, the next 60 DSCP
bits failed to be set.
Fixes: 9b7fe8046d74 ("nfp: add DCB IEEE support")
Cc: stable@vger.kernel.org
Signed-off-by: Huayu Chen <huayu.chen@corigine.com>
Acked-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Introduce the W/A for packet errors seen with short cables (<1m) between
two DP83867 PHYs.
The W/A recommended by DM requires FFE Equalizer Configuration tuning by
writing value 0x0E81 to DSP_FFE_CFG register (0x012C), surrounded by hard
and soft resets as follows:
write_reg(0x001F, 0x8000); //hard reset
write_reg(DSP_FFE_CFG, 0x0E81);
write_reg(0x001F, 0x4000); //soft reset
Since DP83867 PHY DM says "Changing this register to 0x0E81, will not
affect Long Cable performance.", enable the W/A by default.
Fixes: 2a10154abcb7 ("net: phy: dp83867: Add TI dp83867 phy")
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In the (unlikely) event that pm_runtime_get() (disguised as
pm_runtime_resume_and_get()) fails, the remove callback returned an
error early. The problem with this is that the driver core ignores the
error value and continues removing the device. This results in a
resource leak. Worse the devm allocated resources are freed and so if a
callback of the driver is called later the register mapping is already
gone which probably results in a crash.
Fixes: a31eda65ba21 ("net: fec: fix clock count mis-match")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20230510200020.1534610-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull drm fixes from Dave Airlie:
"About the usual for this stage, bunch of amdgpu, a few i915 and a
scattering of fixes across the board"
dsc:
- macro fixes
simplefb:
- fix VESA format
scheduler:
- timeout handling fix
fbdev:
- avoid potential out-of-bounds access in generic fbdev emulation
ast:
- improve AST2500+ compat on ARM
mipi-dsi:
- small mipi-dsi fix
amdgpu:
- VCN3 fixes
- APUs always support PCI atomics
- legacy power management fixes
- DCN 3.1.4 fix
- DCFCLK fix
- fix several RAS irq refcount mismatches
- GPU Reset fix
- GFX 11.0.4 fix
i915:
- taint kernel when force_probe is used
- NULL deref and div-by-zero fixes for display
- GuC error capture fix for Xe devices"
* tag 'drm-fixes-2023-05-12' of git://anongit.freedesktop.org/drm/drm: (24 commits)
drm/amdgpu: change gfx 11.0.4 external_id range
drm/amdgpu/jpeg: Remove harvest checking for JPEG3
drm/amdgpu/gfx: disable gfx9 cp_ecc_error_irq only when enabling legacy gfx ras
drm/amd/pm: avoid potential UBSAN issue on legacy asics
drm/i915: taint kernel when force probing unsupported devices
drm/i915/dp: prevent potential div-by-zero
drm/i915: Fix NULL ptr deref by checking new_crtc_state
drm/i915/guc: Don't capture Gen8 regs on Xe devices
drm/amdgpu: disable sdma ecc irq only when sdma RAS is enabled in suspend
drm/amdgpu: Fix vram recover doesn't work after whole GPU reset (v2)
drm/amdgpu: drop gfx_v11_0_cp_ecc_error_irq_funcs
drm/amd/display: Enforce 60us prefetch for 200Mhz DCFCLK modes
drm/amd/display: Add symclk workaround during disable link output
drm/amd/pm: parse pp_handle under appropriate conditions
drm/amdgpu: set gfx9 onwards APU atomics support to be true
drm/amdgpu/nv: update VCN 3 max HEVC encoding resolution
drm/sched: Check scheduler work queue before calling timeout handling
drm/mipi-dsi: Set the fwnode for mipi_dsi_device
drm/nouveau/disp: More DP_RECEIVER_CAP_SIZE array fixes
drm/dsc: fix DP_DSC_MAX_BPP_DELTA_* macro values
...
|
|
A use-after-free bug may occur if init_imstt invokes framebuffer_release
and free the info ptr. The caller, imsttfb_probe didn't notice that and
still keep the ptr as private data in pdev.
If we remove the driver which will call imsttfb_remove to make cleanup,
UAF happens.
Fix it by return error code if bad case happens in init_imstt.
Signed-off-by: Zheng Wang <zyytlz.wz@163.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amdgpu:
- VCN3 fixes
- APUs always support PCI atomics
- Legacy power management fixes
- DCN 3.1.4 fix
- DCFCLK fix
- Fix several RAS irq refcount mismatches
- GPU Reset fix
- GFX 11.0.4 fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230511141755.7896-1-alexander.deucher@amd.com
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
- Fix to taint kernel when force_probe is used
- Null deref and div-by-zero fixes for display
- GuC error capture fix for Xe devices
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZFzdYV3O8lvVJ1DQ@jlahtine-mobl.ger.corp.intel.com
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
drm-misc-fixes for v6.4-rc2:
- More DSC macro fixes.
- Small mipi-dsi fix.
- Scheduler timeout handling fix.
---
drm-misc-fixes for v6.4-rc1:
- Fix DSC macros.
- Fix VESA format for simplefb.
- Prohibit potential out-of-bounds access in generic fbdev emulation.
- Improve AST2500+ compat on ARM.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b34135e3-2651-4e0a-a776-9b047882b1b2@linux.intel.com
|
|
Reduce the amount of output this dev_dbg() statement emits into logs,
otherwise if system software polls the sysfs entry for data and keeps
getting -ENODATA, it could end up filling the logs up.
This does in fact make systemd journald choke, since during boot the
sysfs power supply entries are polled and if journald starts at the
same time, the journal is just being repeatedly filled up, and the
system stops on trying to start journald without booting any further.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
For errors after msm_submitqueue_get(), we need to drop the submitqueue
reference. Additionally after get_unused_fd() we need to drop the fd.
The ordering for dropping the queue lock and put_unused_fd() is not
important, so just move this all into out_post_unlock.
v2: Only drop queue ref if submit doesn't take it
v3: Fix unitialized submit ref in error path
v4: IS_ERR_OR_NULL()
Reported-by: pinkperfect2021@gmail.com
Fixes: f0de40a131d9 drm/msm: ("Reorder lock vs submit alloc")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/536073/
Link: https://lore.kernel.org/r/20230509203041.440619-1-robdclark@gmail.com
|
|
In the case that no IOMMU is available, msm_iommu_new can return NULL
which should be handled. Without we will get a NULL pointer dereference
in the next statement when we try to use the mmu variable.
Fixes: 8cceb773f565 ("drm/msm/adreno: stall translation on fault for all GPU families")
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/535915/
Link: https://lore.kernel.org/r/20230508-6-4-drm-msm-iommu-fixup-v1-1-a7a21ec94f5b@z3ntu.xyz
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from netfilter.
Current release - regressions:
- mtk_eth_soc: fix NULL pointer dereference
Previous releases - regressions:
- core:
- skb_partial_csum_set() fix against transport header magic value
- fix load-tearing on sk->sk_stamp in sock_recv_cmsgs().
- annotate sk->sk_err write from do_recvmmsg()
- add vlan_get_protocol_and_depth() helper
- netlink: annotate accesses to nlk->cb_running
- netfilter: always release netdev hooks from notifier
Previous releases - always broken:
- core: deal with most data-races in sk_wait_event()
- netfilter: fix possible bug_on with enable_hooks=1
- eth: bonding: fix send_peer_notif overflow
- eth: xpcs: fix incorrect number of interfaces
- eth: ipvlan: fix out-of-bounds caused by unclear skb->cb
- eth: stmmac: Initialize MAC_ONEUS_TIC_COUNTER register"
* tag 'net-6.4-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (31 commits)
af_unix: Fix data races around sk->sk_shutdown.
af_unix: Fix a data race of sk->sk_receive_queue->qlen.
net: datagram: fix data-races in datagram_poll()
net: mscc: ocelot: fix stat counter register values
ipvlan:Fix out-of-bounds caused by unclear skb->cb
docs: networking: fix x25-iface.rst heading & index order
gve: Remove the code of clearing PBA bit
tcp: add annotations around sk->sk_shutdown accesses
net: add vlan_get_protocol_and_depth() helper
net: pcs: xpcs: fix incorrect number of interfaces
net: deal with most data-races in sk_wait_event()
net: annotate sk->sk_err write from do_recvmmsg()
netlink: annotate accesses to nlk->cb_running
kselftest: bonding: add num_grat_arp test
selftests: forwarding: lib: add netns support for tc rule handle stats get
Documentation: bonding: fix the doc of peer_notif_delay
bonding: fix send_peer_notif overflow
net: ethernet: mtk_eth_soc: fix NULL pointer dereference
selftests: nft_flowtable.sh: check ingress/egress chain too
selftests: nft_flowtable.sh: monitor result file sizes
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
- fix some unused-variable warning in mtk-mdp3
- ignore unused suspend operations in nxp
- some driver fixes in rcar-vin
* tag 'media/v6.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: platform: mtk-mdp3: work around unused-variable warning
media: nxp: ignore unused suspend operations
media: rcar-vin: Select correct interrupt mode for V4L2_FIELD_ALTERNATE
media: rcar-vin: Fix NV12 size alignment
media: rcar-vin: Gen3 can not scale NV12
|
|
Fix coding style. No functional changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Helge Deller <deller@gmx.de>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Fix coding style. No functional changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Helge Deller <deller@gmx.de>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Fix coding style. No functional changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Helge Deller <deller@gmx.de>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Fix coding style. No functional changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Fix coding style. No functional changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Helge Deller <deller@gmx.de>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Fix coding style. No functional changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Fix coding style. No functional changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Fix coding style. No functional changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Helge Deller <deller@gmx.de>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Fix coding style. No functional changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>
|
