summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2022-02-11moxart: fix potential use-after-free on remove pathGreg Kroah-Hartman1-1/+1
commit bd2db32e7c3e35bd4d9b8bbff689434a50893546 upstream. It was reported that the mmc host structure could be accessed after it was freed in moxart_remove(), so fix this by saving the base register of the device and using it instead of the pointer dereference. Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: Xiyu Yang <xiyuyang19@fudan.edu.cn> Cc: Xin Xiong <xiongx18@fudan.edu.cn> Cc: Xin Tan <tanxin.ctf@gmail.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Yang Li <yang.lee@linux.alibaba.com> Cc: linux-mmc@vger.kernel.org Cc: stable <stable@vger.kernel.org> Reported-by: whitehat002 <hackyzh002@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20220127071638.4057899-1-gregkh@linuxfoundation.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08EDAC/xgene: Fix deferred probingSergey Shtylyov1-1/+1
commit dfd0dfb9a7cc04acf93435b440dd34c2ca7b4424 upstream. The driver overrides error codes returned by platform_get_irq_optional() to -EINVAL for some strange reason, so if it returns -EPROBE_DEFER, the driver will fail the probe permanently instead of the deferred probing. Switch to propagating the proper error codes to platform driver code upwards. [ bp: Massage commit message. ] Fixes: 0d4429301c4a ("EDAC: Add APM X-Gene SoC EDAC driver") Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20220124185503.6720-3-s.shtylyov@omp.ru Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08EDAC/altera: Fix deferred probingSergey Shtylyov1-1/+1
commit 279eb8575fdaa92c314a54c0d583c65e26229107 upstream. The driver overrides the error codes returned by platform_get_irq() to -ENODEV for some strange reason, so if it returns -EPROBE_DEFER, the driver will fail the probe permanently instead of the deferred probing. Switch to propagating the proper error codes to platform driver code upwards. [ bp: Massage commit message. ] Fixes: 71bcada88b0f ("edac: altera: Add Altera SDRAM EDAC support") Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Dinh Nguyen <dinguyen@kernel.org> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20220124185503.6720-2-s.shtylyov@omp.ru Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08rtc: cmos: Evaluate century appropriateRiwen Lu1-1/+1
commit ff164ae39b82ee483b24579c8e22a13a8ce5bd04 upstream. There's limiting the year to 2069. When setting the rtc year to 2070, reading it returns 1970. Evaluate century starting from 19 to count the correct year. $ sudo date -s 20700106 Mon 06 Jan 2070 12:00:00 AM CST $ sudo hwclock -w $ sudo hwclock -r 1970-01-06 12:00:49.604968+08:00 Fixes: 2a4daadd4d3e5071 ("rtc: cmos: ignore bogus century byte") Signed-off-by: Riwen Lu <luriwen@kylinos.cn> Acked-by: Eric Wong <e@80x24.org> Reviewed-by: Mateusz Jończyk <mat.jonczyk@o2.pl> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20220106084609.1223688-1-luriwen@kylinos.cn Signed-off-by: Mateusz Jończyk <mat.jonczyk@o2.pl> # preparation for stable Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08scsi: bnx2fc: Make bnx2fc_recv_frame() mp safeJohn Meneghini1-8/+13
commit 936bd03405fc83ba039d42bc93ffd4b88418f1d3 upstream. Running tests with a debug kernel shows that bnx2fc_recv_frame() is modifying the per_cpu lport stats counters in a non-mpsafe way. Just boot a debug kernel and run the bnx2fc driver with the hardware enabled. [ 1391.699147] BUG: using smp_processor_id() in preemptible [00000000] code: bnx2fc_ [ 1391.699160] caller is bnx2fc_recv_frame+0xbf9/0x1760 [bnx2fc] [ 1391.699174] CPU: 2 PID: 4355 Comm: bnx2fc_l2_threa Kdump: loaded Tainted: G B [ 1391.699180] Hardware name: HP ProLiant DL120 G7, BIOS J01 07/01/2013 [ 1391.699183] Call Trace: [ 1391.699188] dump_stack_lvl+0x57/0x7d [ 1391.699198] check_preemption_disabled+0xc8/0xd0 [ 1391.699205] bnx2fc_recv_frame+0xbf9/0x1760 [bnx2fc] [ 1391.699215] ? do_raw_spin_trylock+0xb5/0x180 [ 1391.699221] ? bnx2fc_npiv_create_vports.isra.0+0x4e0/0x4e0 [bnx2fc] [ 1391.699229] ? bnx2fc_l2_rcv_thread+0xb7/0x3a0 [bnx2fc] [ 1391.699240] bnx2fc_l2_rcv_thread+0x1af/0x3a0 [bnx2fc] [ 1391.699250] ? bnx2fc_ulp_init+0xc0/0xc0 [bnx2fc] [ 1391.699258] kthread+0x364/0x420 [ 1391.699263] ? _raw_spin_unlock_irq+0x24/0x50 [ 1391.699268] ? set_kthread_struct+0x100/0x100 [ 1391.699273] ret_from_fork+0x22/0x30 Restore the old get_cpu/put_cpu code with some modifications to reduce the size of the critical section. Link: https://lore.kernel.org/r/20220124145110.442335-1-jmeneghi@redhat.com Fixes: d576a5e80cd0 ("bnx2fc: Improve stats update mechanism") Tested-by: Guangwu Zhang <guazhang@redhat.com> Acked-by: Saurav Kashyap <skashyap@marvell.com> Signed-off-by: John Meneghini <jmeneghi@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08net: macsec: Verify that send_sci is on when setting Tx sci explicitlyLior Nahmanson1-0/+9
commit d0cfa548dbde354de986911d3913897b5448faad upstream. When setting Tx sci explicit, the Rx side is expected to use this sci and not recalculate it from the packet.However, in case of Tx sci is explicit and send_sci is off, the receiver is wrongly recalculate the sci from the source MAC address which most likely be different than the explicit sci. Fix by preventing such configuration when macsec newlink is established and return EINVAL error code on such cases. Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: Lior Nahmanson <liorna@nvidia.com> Reviewed-by: Raed Salem <raeds@nvidia.com> Signed-off-by: Raed Salem <raeds@nvidia.com> Link: https://lore.kernel.org/r/1643542672-29403-1-git-send-email-raeds@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08spi: mediatek: Avoid NULL pointer crash in interruptBenjamin Gaignard1-1/+1
commit f83a96e5f033fbbd21764705cb9c04234b96218e upstream. In some case, like after a transfer timeout, master->cur_msg pointer is NULL which led to a kernel crash when trying to use master->cur_msg->spi. mtk_spi_can_dma(), pointed by master->can_dma, doesn't use this parameter avoid the problem by setting NULL as second parameter. Fixes: a568231f46322 ("spi: mediatek: Add spi bus for Mediatek MT8173") Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com> Link: https://lore.kernel.org/r/20220131141708.888710-1-benjamin.gaignard@collabora.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08spi: bcm-qspi: check for valid cs before applying chip selectKamal Dasu1-1/+1
commit 2cbd27267ffe020af1442b95ec57f59a157ba85c upstream. Apply only valid chip select value. This change fixes case where chip select is set to initial value of '-1' during probe and PM supend and subsequent resume can try to use the value with undefined behaviour. Also in case where gpio based chip select, the check in bcm_qspi_chip_select() shall prevent undefined behaviour on resume. Fixes: fa236a7ef240 ("spi: bcm-qspi: Add Broadcom MSPI driver") Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20220127185359.27322-1-kdasu.kdev@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08iommu/amd: Fix loop timeout issue in iommu_ga_log_enable()Joerg Roedel1-0/+2
commit 9b45a7738eec52bf0f5d8d3d54e822962781c5f2 upstream. The polling loop for the register change in iommu_ga_log_enable() needs to have a udelay() in it. Otherwise the CPU might be faster than the IOMMU hardware and wrongly trigger the WARN_ON() further down the code stream. Use a 10us for udelay(), has there is some hardware where activation of the GA log can take more than a 100ms. A future optimization should move the activation check of the GA log to the point where it gets used for the first time. But that is a bigger change and not suitable for a fix. Fixes: 8bda0cfbdc1a ("iommu/amd: Detect and initialize guest vAPIC log") Signed-off-by: Joerg Roedel <jroedel@suse.de> Link: https://lore.kernel.org/r/20220204115537.3894-1-joro@8bytes.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08drm/nouveau: fix off by one in BIOS boundary checkingNick Lopez1-1/+1
commit 1b777d4d9e383d2744fc9b3a09af6ec1893c8b1a upstream. Bounds checking when parsing init scripts embedded in the BIOS reject access to the last byte. This causes driver initialization to fail on Apple eMac's with GeForce 2 MX GPUs, leaving the system with no working console. This is probably only seen on OpenFirmware machines like PowerPC Macs because the BIOS image provided by OF is only the used parts of the ROM, not a power-of-two blocks read from PCI directly so PCs always have empty bytes at the end that are never accessed. Signed-off-by: Nick Lopez <github@glowingmonkey.org> Fixes: 4d4e9907ff572 ("drm/nouveau/bios: guard against out-of-bounds accesses to image") Cc: <stable@vger.kernel.org> # v4.10+ Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu> Reviewed-by: Karol Herbst <kherbst@redhat.com> Signed-off-by: Karol Herbst <kherbst@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220122081906.2633061-1-github@glowingmonkey.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08net: amd-xgbe: Fix skb data length underflowShyam Sundar S K1-1/+11
commit 5aac9108a180fc06e28d4e7fb00247ce603b72ee upstream. There will be BUG_ON() triggered in include/linux/skbuff.h leading to intermittent kernel panic, when the skb length underflow is detected. Fix this by dropping the packet if such length underflows are seen because of inconsistencies in the hardware descriptors. Fixes: 622c36f143fc ("amd-xgbe: Fix jumbo MTU processing on newer hardware") Suggested-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Acked-by: Tom Lendacky <thomas.lendacky@amd.com> Link: https://lore.kernel.org/r/20220127092003.2812745-1-Shyam-sundar.S-k@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08net: amd-xgbe: ensure to reset the tx_timer_active flagRaju Rangoju1-0/+2
commit 7674b7b559b683478c3832527c59bceb169e701d upstream. Ensure to reset the tx_timer_active flag in xgbe_stop(), otherwise a port restart may result in tx timeout due to uncleared flag. Fixes: c635eaacbf77 ("amd-xgbe: Remove Tx coalescing") Co-developed-by: Sudheesh Mavila <sudheesh.mavila@amd.com> Signed-off-by: Sudheesh Mavila <sudheesh.mavila@amd.com> Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com> Acked-by: Tom Lendacky <thomas.lendacky@amd.com> Link: https://lore.kernel.org/r/20220127060222.453371-1-Raju.Rangoju@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08ipheth: fix EOVERFLOW in ipheth_rcvbulk_callbackGeorgi Valkov1-3/+3
commit 63e4b45c82ed1bde979da7052229a4229ce9cabf upstream. When rx_buf is allocated we need to account for IPHETH_IP_ALIGN, which reduces the usable size by 2 bytes. Otherwise we have 1512 bytes usable instead of 1514, and if we receive more than 1512 bytes, ipheth_rcvbulk_callback is called with status -EOVERFLOW, after which the driver malfunctiones and all communication stops. Resolves ipheth 2-1:4.2: ipheth_rcvbulk_callback: urb status: -75 Fixes: f33d9e2b48a3 ("usbnet: ipheth: fix connectivity with iOS 14") Signed-off-by: Georgi Valkov <gvalkov@abv.bg> Tested-by: Jan Kiszka <jan.kiszka@siemens.com> Link: https://lore.kernel.org/all/B60B8A4B-92A0-49B3-805D-809A2433B46C@abv.bg/ Link: https://lore.kernel.org/all/24851bd2769434a5fc24730dce8e8a984c5a4505.1643699778.git.jan.kiszka@siemens.com/ Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08hwmon: (lm90) Reduce maximum conversion rate for G781Guenter Roeck1-1/+1
[ Upstream commit a66c5ed539277b9f2363bbace0dba88b85b36c26 ] According to its datasheet, G781 supports a maximum conversion rate value of 8 (62.5 ms). However, chips labeled G781 and G780 were found to only support a maximum conversion rate value of 7 (125 ms). On the other side, chips labeled G781-1 and G784 were found to support a conversion rate value of 8. There is no known means to distinguish G780 from G781 or G784; all chips report the same manufacturer ID and chip revision. Setting the conversion rate register value to 8 on chips not supporting it causes unexpected behavior since the real conversion rate is set to 0 (16 seconds) if a value of 8 is written into the conversion rate register. Limit the conversion rate register value to 7 for all G78x chips to avoid the problem. Fixes: ae544f64cc7b ("hwmon: (lm90) Add support for GMT G781") Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-08drm/msm: Fix wrong size calculationXianting Tian1-1/+1
commit 0a727b459ee39bd4c5ced19d6024258ac87b6b2e upstream. For example, memory-region in .dts as below, reg = <0x0 0x50000000 0x0 0x20000000> We can get below values, struct resource r; r.start = 0x50000000; r.end = 0x6fffffff; So the size should be: size = r.end - r.start + 1 = 0x20000000 Signed-off-by: Xianting Tian <xianting.tian@linux.alibaba.com> Fixes: 072f1f9168ed ("drm/msm: add support for "stolen" mem") Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220112123334.749776-1-xianting.tian@linux.alibaba.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-08scsi: bnx2fc: Flush destroy_work queue before calling bnx2fc_interface_put()John Meneghini1-15/+5
commit 847f9ea4c5186fdb7b84297e3eeed9e340e83fce upstream. The bnx2fc_destroy() functions are removing the interface before calling destroy_work. This results multiple WARNings from sysfs_remove_group() as the controller rport device attributes are removed too early. Replace the fcoe_port's destroy_work queue. It's not needed. The problem is easily reproducible with the following steps. Example: $ dmesg -w & $ systemctl enable --now fcoe $ fipvlan -s -c ens2f1 $ fcoeadm -d ens2f1.802 [ 583.464488] host2: libfc: Link down on port (7500a1) [ 583.472651] bnx2fc: 7500a1 - rport not created Yet!! [ 583.490468] ------------[ cut here ]------------ [ 583.538725] sysfs group 'power' not found for kobject 'rport-2:0-0' [ 583.568814] WARNING: CPU: 3 PID: 192 at fs/sysfs/group.c:279 sysfs_remove_group+0x6f/0x80 [ 583.607130] Modules linked in: dm_service_time 8021q garp mrp stp llc bnx2fc cnic uio rpcsec_gss_krb5 auth_rpcgss nfsv4 ... [ 583.942994] CPU: 3 PID: 192 Comm: kworker/3:2 Kdump: loaded Not tainted 5.14.0-39.el9.x86_64 #1 [ 583.984105] Hardware name: HP ProLiant DL120 G7, BIOS J01 07/01/2013 [ 584.016535] Workqueue: fc_wq_2 fc_rport_final_delete [scsi_transport_fc] [ 584.050691] RIP: 0010:sysfs_remove_group+0x6f/0x80 [ 584.074725] Code: ff 5b 48 89 ef 5d 41 5c e9 ee c0 ff ff 48 89 ef e8 f6 b8 ff ff eb d1 49 8b 14 24 48 8b 33 48 c7 c7 ... [ 584.162586] RSP: 0018:ffffb567c15afdc0 EFLAGS: 00010282 [ 584.188225] RAX: 0000000000000000 RBX: ffffffff8eec4220 RCX: 0000000000000000 [ 584.221053] RDX: ffff8c1586ce84c0 RSI: ffff8c1586cd7cc0 RDI: ffff8c1586cd7cc0 [ 584.255089] RBP: 0000000000000000 R08: 0000000000000000 R09: ffffb567c15afc00 [ 584.287954] R10: ffffb567c15afbf8 R11: ffffffff8fbe7f28 R12: ffff8c1486326400 [ 584.322356] R13: ffff8c1486326480 R14: ffff8c1483a4a000 R15: 0000000000000004 [ 584.355379] FS: 0000000000000000(0000) GS:ffff8c1586cc0000(0000) knlGS:0000000000000000 [ 584.394419] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 584.421123] CR2: 00007fe95a6f7840 CR3: 0000000107674002 CR4: 00000000000606e0 [ 584.454888] Call Trace: [ 584.466108] device_del+0xb2/0x3e0 [ 584.481701] device_unregister+0x13/0x60 [ 584.501306] bsg_unregister_queue+0x5b/0x80 [ 584.522029] bsg_remove_queue+0x1c/0x40 [ 584.541884] fc_rport_final_delete+0xf3/0x1d0 [scsi_transport_fc] [ 584.573823] process_one_work+0x1e3/0x3b0 [ 584.592396] worker_thread+0x50/0x3b0 [ 584.609256] ? rescuer_thread+0x370/0x370 [ 584.628877] kthread+0x149/0x170 [ 584.643673] ? set_kthread_struct+0x40/0x40 [ 584.662909] ret_from_fork+0x22/0x30 [ 584.680002] ---[ end trace 53575ecefa942ece ]--- Link: https://lore.kernel.org/r/20220115040044.1013475-1-jmeneghi@redhat.com Fixes: 0cbf32e1681d ("[SCSI] bnx2fc: Avoid calling bnx2fc_if_destroy with unnecessary locks") Tested-by: Guangwu Zhang <guazhang@redhat.com> Co-developed-by: Maurizio Lombardi <mlombard@redhat.com> Signed-off-by: Maurizio Lombardi <mlombard@redhat.com> Signed-off-by: John Meneghini <jmeneghi@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08USB: core: Fix hang in usb_kill_urb by adding memory barriersAlan Stern2-0/+26
commit 26fbe9772b8c459687930511444ce443011f86bf upstream. The syzbot fuzzer has identified a bug in which processes hang waiting for usb_kill_urb() to return. It turns out the issue is not unlinking the URB; that works just fine. Rather, the problem arises when the wakeup notification that the URB has completed is not received. The reason is memory-access ordering on SMP systems. In outline form, usb_kill_urb() and __usb_hcd_giveback_urb() operating concurrently on different CPUs perform the following actions: CPU 0 CPU 1 ---------------------------- --------------------------------- usb_kill_urb(): __usb_hcd_giveback_urb(): ... ... atomic_inc(&urb->reject); atomic_dec(&urb->use_count); ... ... wait_event(usb_kill_urb_queue, atomic_read(&urb->use_count) == 0); if (atomic_read(&urb->reject)) wake_up(&usb_kill_urb_queue); Confining your attention to urb->reject and urb->use_count, you can see that the overall pattern of accesses on CPU 0 is: write urb->reject, then read urb->use_count; whereas the overall pattern of accesses on CPU 1 is: write urb->use_count, then read urb->reject. This pattern is referred to in memory-model circles as SB (for "Store Buffering"), and it is well known that without suitable enforcement of the desired order of accesses -- in the form of memory barriers -- it is entirely possible for one or both CPUs to execute their reads ahead of their writes. The end result will be that sometimes CPU 0 sees the old un-decremented value of urb->use_count while CPU 1 sees the old un-incremented value of urb->reject. Consequently CPU 0 ends up on the wait queue and never gets woken up, leading to the observed hang in usb_kill_urb(). The same pattern of accesses occurs in usb_poison_urb() and the failure pathway of usb_hcd_submit_urb(). The problem is fixed by adding suitable memory barriers. To provide proper memory-access ordering in the SB pattern, a full barrier is required on both CPUs. The atomic_inc() and atomic_dec() accesses themselves don't provide any memory ordering, but since they are present, we can use the optimized smp_mb__after_atomic() memory barrier in the various routines to obtain the desired effect. This patch adds the necessary memory barriers. CC: <stable@vger.kernel.org> Reported-and-tested-by: syzbot+76629376e06e2c2ad626@syzkaller.appspotmail.com Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/Ye8K0QYee0Q0Nna2@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08usb: gadget: f_sourcesink: Fix isoc transfer for USB_SPEED_SUPER_PLUSPavankumar Kondeti1-0/+1
commit 904edf8aeb459697129be5fde847e2a502f41fd9 upstream. Currently when gadget enumerates in super speed plus, the isoc endpoint request buffer size is not calculated correctly. Fix this by checking the gadget speed against USB_SPEED_SUPER_PLUS and update the request buffer size. Fixes: 90c4d05780d4 ("usb: fix various gadgets null ptr deref on 10gbps cabling.") Cc: stable <stable@vger.kernel.org> Signed-off-by: Pavankumar Kondeti <quic_pkondeti@quicinc.com> Link: https://lore.kernel.org/r/1642820602-20619-1-git-send-email-quic_pkondeti@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08usb-storage: Add unusual-devs entry for VL817 USB-SATA bridgeAlan Stern1-0/+10
commit 5b67b315037250a61861119683e7fcb509deea25 upstream. Two people have reported (and mentioned numerous other reports on the web) that VIA's VL817 USB-SATA bridge does not work with the uas driver. Typical log messages are: [ 3606.232149] sd 14:0:0:0: [sdg] tag#2 uas_zap_pending 0 uas-tag 1 inflight: CMD [ 3606.232154] sd 14:0:0:0: [sdg] tag#2 CDB: Write(16) 8a 00 00 00 00 00 18 0c c9 80 00 00 00 80 00 00 [ 3606.306257] usb 4-4.4: reset SuperSpeed Plus Gen 2x1 USB device number 11 using xhci_hcd [ 3606.328584] scsi host14: uas_eh_device_reset_handler success Surprisingly, the devices do seem to work okay for some other people. The cause of the differing behaviors is not known. In the hope of getting the devices to work for the most users, even at the possible cost of degraded performance for some, this patch adds an unusual_devs entry for the VL817 to block it from binding to the uas driver by default. Users will be able to override this entry by means of a module parameter, if they want. CC: <stable@vger.kernel.org> Reported-by: DocMAX <mail@vacharakis.de> Reported-and-tested-by: Thomas Weißschuh <linux@weissschuh.net> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/Ye8IsK2sjlEv1rqU@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08tty: Add support for Brainboxes UC cards.Cameron Williams1-2/+98
commit 152d1afa834c84530828ee031cf07a00e0fc0b8c upstream. This commit adds support for the some of the Brainboxes PCI range of cards, including the UC-101, UC-235/246, UC-257, UC-268, UC-275/279, UC-302, UC-310, UC-313, UC-320/324, UC-346, UC-357, UC-368 and UC-420/431. Signed-off-by: Cameron Williams <cang1@live.co.uk> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/AM5PR0202MB2564688493F7DD9B9C610827C45E9@AM5PR0202MB2564.eurprd02.prod.outlook.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08tty: n_gsm: fix SW flow control encoding/handlingdaniel.starke@siemens.com1-1/+3
commit 8838b2af23caf1ff0610caef2795d6668a013b2d upstream. n_gsm is based on the 3GPP 07.010 and its newer version is the 3GPP 27.010. See https://portal.3gpp.org/desktopmodules/Specifications/SpecificationDetails.aspx?specificationId=1516 The changes from 07.010 to 27.010 are non-functional. Therefore, I refer to the newer 27.010 here. Chapter 5.2.7.3 states that DC1 (XON) and DC3 (XOFF) are the control characters defined in ISO/IEC 646. These shall be quoted if seen in the data stream to avoid interpretation as flow control characters. ISO/IEC 646 refers to the set of ISO standards described as the ISO 7-bit coded character set for information interchange. Its final version is also known as ITU T.50. See https://www.itu.int/rec/T-REC-T.50-199209-I/en To abide the standard it is needed to quote DC1 and DC3 correctly if these are seen as data bytes and not as control characters. The current implementation already tries to enforce this but fails to catch all defined cases. 3GPP 27.010 chapter 5.2.7.3 clearly states that the most significant bit shall be ignored for DC1 and DC3 handling. The current implementation handles only the case with the most significant bit set 0. Cases in which DC1 and DC3 have the most significant bit set 1 are left unhandled. This patch fixes this by masking the data bytes with ISO_IEC_646_MASK (only the 7 least significant bits set 1) before comparing them with XON (a.k.a. DC1) and XOFF (a.k.a. DC3) when testing which byte values need quotation via byte stuffing. Fixes: e1eaea46bb40 ("tty: n_gsm line discipline") Cc: stable@vger.kernel.org Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20220120101857.2509-1-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08serial: stm32: fix software flow control transferValentin Caron1-1/+1
commit 037b91ec7729524107982e36ec4b40f9b174f7a2 upstream. x_char is ignored by stm32_usart_start_tx() when xmit buffer is empty. Fix start_tx condition to allow x_char to be sent. Fixes: 48a6092fb41f ("serial: stm32-usart: Add STM32 USART Driver") Cc: stable <stable@vger.kernel.org> Signed-off-by: Erwan Le Ray <erwan.leray@foss.st.com> Signed-off-by: Valentin Caron <valentin.caron@foss.st.com> Link: https://lore.kernel.org/r/20220111164441.6178-3-valentin.caron@foss.st.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08scsi: zfcp: Fix failed recovery on gone remote port with non-NPIV FCP devicesSteffen Maier1-1/+12
commit 8c9db6679be4348b8aae108e11d4be2f83976e30 upstream. Suppose we have an environment with a number of non-NPIV FCP devices (virtual HBAs / FCP devices / zfcp "adapter"s) sharing the same physical FCP channel (HBA port) and its I_T nexus. Plus a number of storage target ports zoned to such shared channel. Now one target port logs out of the fabric causing an RSCN. Zfcp reacts with an ADISC ELS and subsequent port recovery depending on the ADISC result. This happens on all such FCP devices (in different Linux images) concurrently as they all receive a copy of this RSCN. In the following we look at one of those FCP devices. Requests other than FSF_QTCB_FCP_CMND can be slow until they get a response. Depending on which requests are affected by slow responses, there are different recovery outcomes. Here we want to fix failed recoveries on port or adapter level by avoiding recovery requests that can be slow. We need the cached N_Port_ID for the remote port "link" test with ADISC. Just before sending the ADISC, we now intentionally forget the old cached N_Port_ID. The idea is that on receiving an RSCN for a port, we have to assume that any cached information about this port is stale. This forces a fresh new GID_PN [FC-GS] nameserver lookup on any subsequent recovery for the same port. Since we typically can still communicate with the nameserver efficiently, we now reach steady state quicker: Either the nameserver still does not know about the port so we stop recovery, or the nameserver already knows the port potentially with a new N_Port_ID and we can successfully and quickly perform open port recovery. For the one case, where ADISC returns successfully, we re-initialize port->d_id because that case does not involve any port recovery. This also solves a problem if the storage WWPN quickly logs into the fabric again but with a different N_Port_ID. Such as on virtual WWPN takeover during target NPIV failover. [https://www.redbooks.ibm.com/abstracts/redp5477.html] In that case the RSCN from the storage FDISC was ignored by zfcp and we could not successfully recover the failover. On some later failback on the storage, we could have been lucky if the virtual WWPN got the same old N_Port_ID from the SAN switch as we still had cached. Then the related RSCN triggered a successful port reopen recovery. However, there is no guarantee to get the same N_Port_ID on NPIV FDISC. Even though NPIV-enabled FCP devices are not affected by this problem, this code change optimizes recovery time for gone remote ports as a side effect. The timely drop of cached N_Port_IDs prevents unnecessary slow open port attempts. While the problem might have been in code before v2.6.32 commit 799b76d09aee ("[SCSI] zfcp: Decouple gid_pn requests from erp") this fix depends on the gid_pn_work introduced with that commit, so we mark it as culprit to satisfy fix dependencies. Note: Point-to-point remote port is already handled separately and gets its N_Port_ID from the cached peer_d_id. So resetting port->d_id in general does not affect PtP. Link: https://lore.kernel.org/r/20220118165803.3667947-1-maier@linux.ibm.com Fixes: 799b76d09aee ("[SCSI] zfcp: Decouple gid_pn requests from erp") Cc: <stable@vger.kernel.org> #2.6.32+ Suggested-by: Benjamin Block <bblock@linux.ibm.com> Reviewed-by: Benjamin Block <bblock@linux.ibm.com> Signed-off-by: Steffen Maier <maier@linux.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-29ion: Do not 'put' ION handle until after its final useLee Jones1-5/+5
pass_to_user() eventually calls kref_put() on an ION handle which is still live, potentially allowing for it to be legitimately freed by the client. Prevent this from happening before its final use in both ION_IOC_ALLOC and ION_IOC_IMPORT. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-29ion: Protect kref from userspace manipulationDaniel Rosenberg3-9/+83
This separates the kref for ion handles into two components. Userspace requests through the ioctl will hold at most one reference to the internally used kref. All additional requests will increment a separate counter, and the original reference is only put once that counter hits 0. This protects the kernel from a poorly behaving userspace. Signed-off-by: Daniel Rosenberg <drosen@google.com> [d-cagle@codeaurora.org: Resolve style issues] Signed-off-by: Dennis Cagle <d-cagle@codeaurora.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-29ion: Fix use after free during ION_IOC_ALLOCDaniel Rosenberg3-8/+25
If a user happens to call ION_IOC_FREE during an ION_IOC_ALLOC on the just allocated id, and the copy_to_user fails, the cleanup code will attempt to free an already freed handle. This adds a wrapper for ion_alloc that adds an ion_handle_get to avoid this. Signed-off-by: Daniel Rosenberg <drosen@google.com> Signed-off-by: Dennis Cagle <d-cagle@codeaurora.org> Signed-off-by: Patrick Daly <pdaly@codeaurora.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-29media: firewire: firedtv-avc: fix a buffer overflow in avc_ca_pmt()Dan Carpenter2-3/+13
commit 35d2969ea3c7d32aee78066b1f3cf61a0d935a4e upstream. The bounds checking in avc_ca_pmt() is not strict enough. It should be checking "read_pos + 4" because it's reading 5 bytes. If the "es_info_length" is non-zero then it reads a 6th byte so there needs to be an additional check for that. I also added checks for the "write_pos". I don't think these are required because "read_pos" and "write_pos" are tied together so checking one ought to be enough. But they make the code easier to understand for me. The check on write_pos is: if (write_pos + 4 >= sizeof(c->operand) - 4) { The first "+ 4" is because we're writing 5 bytes and the last " - 4" is to leave space for the CRC. The other problem is that "length" can be invalid. It comes from "data_length" in fdtv_ca_pmt(). Cc: stable@vger.kernel.org Reported-by: Luo Likang <luolikang@nsfocus.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> [bwh: Backported to 4.9: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-29drm/i915: Flush TLBs before releasing backing storeTvrtko Ursulin4-1/+86
commit 7938d61591d33394a21bdd7797a245b65428f44c upstream. We need to flush TLBs before releasing backing store otherwise userspace is able to encounter stale entries if a) it is not declaring access to certain buffers and b) it races with the backing store release from a such undeclared execution already executing on the GPU in parallel. The approach taken is to mark any buffer objects which were ever bound to the GPU and to trigger a serialized TLB flush when their backing store is released. Alternatively the flushing could be done on VMA unbind, at which point we would be able to ascertain whether there is potential a parallel GPU execution (which could race), but essentially it boils down to paying the cost of TLB flushes potentially needlessly at VMA unbind time (when the backing store is not known to be going away so not needed for safety), versus potentially needlessly at backing store relase time (since we at that point cannot tell whether there is anything executing on the GPU which uses that object). Thereforce simplicity of implementation has been chosen for now with scope to benchmark and refine later as required. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reported-by: Sushma Venkatesh Reddy <sushma.venkatesh.reddy@intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Dave Airlie <airlied@redhat.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Jon Bloomfield <jon.bloomfield@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-27gianfar: fix jumbo packets+napi+rx overrun crashMichael Braun1-0/+15
commit d8861bab48b6c1fc3cdbcab8ff9d1eaea43afe7f upstream. When using jumbo packets and overrunning rx queue with napi enabled, the following sequence is observed in gfar_add_rx_frag: | lstatus | | skb | t | lstatus, size, flags | first | len, data_len, *ptr | ---+--------------------------------------+-------+-----------------------+ 13 | 18002348, 9032, INTERRUPT LAST | 0 | 9600, 8000, f554c12e | 12 | 10000640, 1600, INTERRUPT | 0 | 8000, 6400, f554c12e | 11 | 10000640, 1600, INTERRUPT | 0 | 6400, 4800, f554c12e | 10 | 10000640, 1600, INTERRUPT | 0 | 4800, 3200, f554c12e | 09 | 10000640, 1600, INTERRUPT | 0 | 3200, 1600, f554c12e | 08 | 14000640, 1600, INTERRUPT FIRST | 0 | 1600, 0, f554c12e | 07 | 14000640, 1600, INTERRUPT FIRST | 1 | 0, 0, f554c12e | 06 | 1c000080, 128, INTERRUPT LAST FIRST | 1 | 0, 0, abf3bd6e | 05 | 18002348, 9032, INTERRUPT LAST | 0 | 8000, 6400, c5a57780 | 04 | 10000640, 1600, INTERRUPT | 0 | 6400, 4800, c5a57780 | 03 | 10000640, 1600, INTERRUPT | 0 | 4800, 3200, c5a57780 | 02 | 10000640, 1600, INTERRUPT | 0 | 3200, 1600, c5a57780 | 01 | 10000640, 1600, INTERRUPT | 0 | 1600, 0, c5a57780 | 00 | 14000640, 1600, INTERRUPT FIRST | 1 | 0, 0, c5a57780 | So at t=7 a new packets is started but not finished, probably due to rx overrun - but rx overrun is not indicated in the flags. Instead a new packets starts at t=8. This results in skb->len to exceed size for the LAST fragment at t=13 and thus a negative fragment size added to the skb. This then crashes: kernel BUG at include/linux/skbuff.h:2277! Oops: Exception in kernel mode, sig: 5 [#1] ... NIP [c04689f4] skb_pull+0x2c/0x48 LR [c03f62ac] gfar_clean_rx_ring+0x2e4/0x844 Call Trace: [ec4bfd38] [c06a84c4] _raw_spin_unlock_irqrestore+0x60/0x7c (unreliable) [ec4bfda8] [c03f6a44] gfar_poll_rx_sq+0x48/0xe4 [ec4bfdc8] [c048d504] __napi_poll+0x54/0x26c [ec4bfdf8] [c048d908] net_rx_action+0x138/0x2c0 [ec4bfe68] [c06a8f34] __do_softirq+0x3a4/0x4fc [ec4bfed8] [c0040150] run_ksoftirqd+0x58/0x70 [ec4bfee8] [c0066ecc] smpboot_thread_fn+0x184/0x1cc [ec4bff08] [c0062718] kthread+0x140/0x144 [ec4bff38] [c0012350] ret_from_kernel_thread+0x14/0x1c This patch fixes this by checking for computed LAST fragment size, so a negative sized fragment is never added. In order to prevent the newer rx frame from getting corrupted, the FIRST flag is checked to discard the incomplete older frame. Signed-off-by: Michael Braun <michael-dev@fami-braun.de> Signed-off-by: David S. Miller <davem@davemloft.net> Cc: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-27gianfar: simplify FCS handling and fix memory leakAndy Spencer1-16/+7
commit d903ec77118c09f93a610b384d83a6df33a64fe6 upstream. Previously, buffer descriptors containing only the frame check sequence (FCS) were skipped and not added to the skb. However, the page reference count was still incremented, leading to a memory leak. Fixing this inside gfar_add_rx_frag() is difficult due to reserved memory handling and page reuse. Instead, move the FCS handling to gfar_process_frame() and trim off the FCS before passing the skb up the networking stack. Signed-off-by: Andy Spencer <aspencer@spacex.com> Signed-off-by: Jim Gruen <jgruen@spacex.com> Signed-off-by: David S. Miller <davem@davemloft.net> Cc: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-27drm/ttm/nouveau: don't call tt destroy callback on alloc failure.Dave Airlie2-8/+3
commit 5de5b6ecf97a021f29403aa272cb4e03318ef586 upstream. This is confusing, and from my reading of all the drivers only nouveau got this right. Just make the API act under driver control of it's own allocation failing, and don't call destroy, if the page table fails to create there is nothing to cleanup here. (I'm willing to believe I've missed something here, so please review deeply). Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200728041736.20689-1-airlied@gmail.com [bwh: Backported to 4.14: - Drop change in ttm_sg_tt_init() - Adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-27lib82596: Fix IRQ check in sni_82596_probeMiaoqian Lin1-1/+2
commit 99218cbf81bf21355a3de61cd46a706d36e900e6 upstream. platform_get_irq() returns negative error number instead 0 on failure. And the doc of platform_get_irq() provides a usage example: int irq = platform_get_irq(pdev, 0); if (irq < 0) return irq; Fix the check of return value to catch errors correctly. Fixes: 115978859272 ("i825xx: Move the Intel 82586/82593/82596 based drivers") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-27bcmgenet: add WOL IRQ checkSergey Shtylyov1-4/+6
commit 9deb48b53e7f4056c2eaa2dc2ee3338df619e4f6 upstream. The driver neglects to check the result of platform_get_irq_optional()'s call and blithely passes the negative error codes to devm_request_irq() (which takes *unsigned* IRQ #), causing it to fail with -EINVAL. Stop calling devm_request_irq() with the invalid IRQ #s. Fixes: 8562056f267d ("net: bcmgenet: request Wake-on-LAN interrupt") Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-27dmaengine: at_xdmac: Fix at_xdmac_lld struct definitionTudor Ambarus1-9/+9
commit 912f7c6f7fac273f40e621447cf17d14b50d6e5b upstream. The hardware channel next descriptor view structure contains just fields of 32 bits, while dma_addr_t can be of type u64 or u32 depending on CONFIG_ARCH_DMA_ADDR_T_64BIT. Force u32 to comply with what the hardware expects. Fixes: e1f7c9eee707 ("dmaengine: at_xdmac: creation of the atmel eXtended DMA Controller driver") Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Link: https://lore.kernel.org/r/20211215110115.191749-11-tudor.ambarus@microchip.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-27dmaengine: at_xdmac: Fix lld view settingTudor Ambarus1-1/+3
commit 1385eb4d14d447cc5d744bc2ac34f43be66c9963 upstream. AT_XDMAC_CNDC_NDVIEW_NDV3 was set even for AT_XDMAC_MBR_UBC_NDV2, because of the wrong bit handling. Fix it. Fixes: ee0fe35c8dcd ("dmaengine: xdmac: Handle descriptor's view 3 registers") Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Link: https://lore.kernel.org/r/20211215110115.191749-10-tudor.ambarus@microchip.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-27dmaengine: at_xdmac: Print debug message after realeasing the lockTudor Ambarus1-2/+4
commit 5edc24ac876a928f36f407a0fcdb33b94a3a210f upstream. It is desirable to do the prints without the lock held if possible, so move the print after the lock is released. Fixes: e1f7c9eee707 ("dmaengine: at_xdmac: creation of the atmel eXtended DMA Controller driver") Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Link: https://lore.kernel.org/r/20211215110115.191749-4-tudor.ambarus@microchip.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-27dmaengine: at_xdmac: Don't start transactions at tx_submit levelTudor Ambarus1-6/+0
commit bccfb96b59179d4f96cbbd1ddff8fac6d335eae4 upstream. tx_submit is supposed to push the current transaction descriptor to a pending queue, waiting for issue_pending() to be called. issue_pending() must start the transfer, not tx_submit(), thus remove at_xdmac_start_xfer() from at_xdmac_tx_submit(). Clients of at_xdmac that assume that tx_submit() starts the transfer must be updated and call dma_async_issue_pending() if they miss to call it (one example is atmel_serial). As the at_xdmac_start_xfer() is now called only from at_xdmac_advance_work() when !at_xdmac_chan_is_enabled(), the at_xdmac_chan_is_enabled() check is no longer needed in at_xdmac_start_xfer(), thus remove it. Fixes: e1f7c9eee707 ("dmaengine: at_xdmac: creation of the atmel eXtended DMA Controller driver") Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Link: https://lore.kernel.org/r/20211215110115.191749-2-tudor.ambarus@microchip.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-27libcxgb: Don't accidentally set RTO_ONLINK in cxgb_find_route()Guillaume Nault1-1/+2
commit a915deaa9abe4fb3a440312c954253a6a733608e upstream. Mask the ECN bits before calling ip_route_output_ports(). The tos variable might be passed directly from an IPv4 header, so it may have the last ECN bit set. This interferes with the route lookup process as ip_route_output_key_hash() interpretes this bit specially (to restrict the route scope). Found by code inspection, compile tested only. Fixes: 804c2f3e36ef ("libcxgb,iw_cxgb4,cxgbit: add cxgb_find_route()") Signed-off-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-27net: axienet: fix number of TX ring slots for available checkRobert Hancock1-2/+2
commit aba57a823d2985a2cc8c74a2535f3a88e68d9424 upstream. The check for the number of available TX ring slots was off by 1 since a slot is required for the skb header as well as each fragment. This could result in overwriting a TX ring slot that was still in use. Fixes: 8a3b7a252dca9 ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver") Signed-off-by: Robert Hancock <robert.hancock@calian.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-27net: axienet: Wait for PhyRstCmplt after core resetRobert Hancock1-0/+10
commit b400c2f4f4c53c86594dd57098970d97d488bfde upstream. When resetting the device, wait for the PhyRstCmplt bit to be set in the interrupt status register before continuing initialization, to ensure that the core is actually ready. When using an external PHY, this also ensures we do not start trying to access the PHY while it is still in reset. The PHY reset is initiated by the core reset which is triggered just above, but remains asserted for 5ms after the core is reset according to the documentation. The MgtRdy bit could also be waited for, but unfortunately when using 7-series devices, the bit does not appear to work as documented (it seems to behave as some sort of link state indication and not just an indication the transceiver is ready) so it can't re