summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2022-04-08crypto: amlogic - call finalize with bh disabledCorentin Labbe1-0/+2
[ Upstream commit dba633342994ce47d347bcf5522ba28301247b79 ] Doing ipsec produces a spinlock recursion warning. This is due to not disabling BH during crypto completion function. Fixes: 48fe583fe541 ("crypto: amlogic - Add crypto accelerator for amlogic GXL") Signed-off-by: Corentin Labbe <clabbe@baylibre.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-08crypto: sun8i-ce - call finalize with bh disabledCorentin Labbe2-0/+6
[ Upstream commit f75a749b6d78aeae2ce90e14fcc4b7b3ba46126d ] Doing ipsec produces a spinlock recursion warning. This is due to not disabling BH during crypto completion function. Fixes: 06f751b61329 ("crypto: allwinner - Add sun8i-ce Crypto Engine") Signed-off-by: Corentin Labbe <clabbe@baylibre.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-08crypto: sun8i-ss - call finalize with bh disabledCorentin Labbe2-0/+6
[ Upstream commit b169b3766242b6f3336e24a6c8ee1522978b57a7 ] Doing ipsec produces a spinlock recursion warning. This is due to not disabling BH during crypto completion function. Fixes: f08fcced6d00 ("crypto: allwinner - Add sun8i-ss cryptographic offloader") Signed-off-by: Corentin Labbe <clabbe@baylibre.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-08hwrng: atmel - disable trng on failure pathClaudiu Beznea1-0/+1
[ Upstream commit a223ea9f89ab960eb254ba78429efd42eaf845eb ] Call atmel_trng_disable() on failure path of probe. Fixes: a1fa98d8116f ("hwrng: atmel - disable TRNG during suspend") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-08spi: spi-zynqmp-gqspi: Handle error for dma_set_maskJiasheng Jiang1-1/+4
[ Upstream commit 13262fc26c1837c51a5131dbbdd67a2387f8bfc7 ] As the potential failure of the dma_set_mask(), it should be better to check it and return error if fails. Fixes: 126bdb606fd2 ("spi: spi-zynqmp-gqspi: return -ENOMEM if dma_map_single fails") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Link: https://lore.kernel.org/r/20220302092051.121343-1-jiasheng@iscas.ac.cn Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-08nvme: cleanup __nvme_check_idsChristoph Hellwig1-5/+4
[ Upstream commit fd8099e7918cd2df39ef306dd1d1af7178a15b81 ] Pass the actual nvme_ns_ids used for the comparison instead of the ns_head that isn't needed and use a more descriptive function name. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-08hwmon: (sch56xx-common) Replace WDOG_ACTIVE with WDOG_HW_RUNNINGArmin Wolf1-1/+1
[ Upstream commit 647d6f09bea7dacf4cdb6d4ea7e3051883955297 ] If the watchdog was already enabled by the BIOS after booting, the watchdog infrastructure needs to regularly send keepalives to prevent a unexpected reset. WDOG_ACTIVE only serves as an status indicator for userspace, we want to use WDOG_HW_RUNNING instead. Since my Fujitsu Esprimo P720 does not support the watchdog, this change is compile-tested only. Suggested-by: Guenter Roeck <linux@roeck-us.net> Fixes: fb551405c0f8 (watchdog: sch56xx: Use watchdog core) Signed-off-by: Armin Wolf <W_Armin@gmx.de> Link: https://lore.kernel.org/r/20220131211935.3656-5-W_Armin@gmx.de Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-08hwmon: (pmbus) Add mutex to regulator opsPatrick Rudolph1-3/+13
[ Upstream commit 686d303ee6301261b422ea51e64833d7909a2c36 ] On PMBUS devices with multiple pages, the regulator ops need to be protected with the update mutex. This prevents accidentally changing the page in a separate thread while operating on the PMBUS_OPERATION register. Tested on Infineon xdpe11280 while a separate thread polls for sensor data. Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Signed-off-by: Marcello Sylvester Bauer <sylv@sylv.io> Link: https://lore.kernel.org/r/b991506bcbf665f7af185945f70bf9d5cf04637c.1645804976.git.sylv@sylv.io Fixes: ddbb4db4ced1b ("hwmon: (pmbus) Add regulator support") Cc: Alan Tull <atull@opensource.altera.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-08spi: pxa2xx-pci: Balance reference count for PCI DMA deviceAndy Shevchenko1-1/+16
[ Upstream commit 609d7ffdc42199a0ec949db057e3b4be6745d6c5 ] The pci_get_slot() increases its reference count, the caller must decrement the reference count by calling pci_dev_put(). Fixes: 743485ea3bee ("spi: pxa2xx-pci: Do a specific setup in a separate function") Fixes: 25014521603f ("spi: pxa2xx-pci: Enable DMA for Intel Merrifield") Reported-by: Wang Qing <wangqing@vivo.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20220223191637.31147-1-andriy.shevchenko@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-08crypto: ccree - don't attempt 0 len DMA mappingsGilad Ben-Yossef1-0/+7
[ Upstream commit 1fb37b5692c915edcc2448a6b37255738c7c77e0 ] Refuse to try mapping zero bytes as this may cause a fault on some configurations / platforms and it seems the prev. attempt is not enough and we need to be more explicit. Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com> Reported-by: Corentin Labbe <clabbe.montjoie@gmail.com> Fixes: ce0fc6db38de ("crypto: ccree - protect against empty or NULL scatterlists") Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-08crypto: rockchip - ECB does not need IVCorentin Labbe1-1/+0
[ Upstream commit 973d74e93820d99d8ea203882631c76edab699c9 ] When loading rockchip crypto module, testmgr complains that ivsize of ecb-des3-ede-rk is not the same than generic implementation. In fact ECB does not use an IV. Fixes: ce0183cb6464b ("crypto: rockchip - switch to skcipher API") Signed-off-by: Corentin Labbe <clabbe@baylibre.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-08spi: tegra114: Add missing IRQ check in tegra_spi_probeMiaoqian Lin1-0/+4
[ Upstream commit 4f92724d4b92c024e721063f520d66e11ca4b54b ] This func misses checking for platform_get_irq()'s call and may passes the negative error codes to request_threaded_irq(), which takes unsigned IRQ #, causing it to fail with -EINVAL, overriding an original error code. Stop calling request_threaded_irq() with invalid IRQ #s. Fixes: f333a331adfa ("spi/tegra114: add spi driver") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Link: https://lore.kernel.org/r/20220128165238.25615-1-linmq006@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-08thermal: int340x: Check for NULL after calling kmemdup()Jiasheng Jiang1-0/+5
[ Upstream commit 38b16d6cfe54c820848bcfc999bc5e8a7da1cefb ] As the potential failure of the allocation, kmemdup() may return NULL. Then, 'bin_attr_data_vault.private' will be NULL, but 'bin_attr_data_vault.size' is not 0, which is not consistent. Therefore, it is better to check the return value of kmemdup() to avoid the confusion. Fixes: 0ba13c763aac ("thermal/int340x_thermal: Export GDDV") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> [ rjw: Subject and changelog edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-08crypto: mxs-dcp - Fix scatterlist processingTomas Paukrt1-1/+1
[ Upstream commit 28e9b6d8199a3f124682b143800c2dacdc3d70dd ] This patch fixes a bug in scatterlist processing that may cause incorrect AES block encryption/decryption. Fixes: 2e6d793e1bf0 ("crypto: mxs-dcp - Use sg_mapping_iter to copy data") Signed-off-by: Tomas Paukrt <tomaspaukrt@email.cz> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-08crypto: sun8i-ss - really disable hash on A80Corentin Labbe1-0/+2
[ Upstream commit 881fc7fba6c3e7d77d608b9a50b01a89d5e0c61b ] When adding hashes support to sun8i-ss, I have added them only on A83T. But I forgot that 0 is a valid algorithm ID, so hashes are enabled on A80 but with an incorrect ID. Anyway, even with correct IDs, hashes do not work on A80 and I cannot find why. So let's disable all of them on A80. Fixes: d9b45418a917 ("crypto: sun8i-ss - support hash algorithms") Signed-off-by: Corentin Labbe <clabbe@baylibre.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-08hwrng: cavium - HW_RANDOM_CAVIUM should depend on ARCH_THUNDERGeert Uytterhoeven1-1/+1
[ Upstream commit ab7d88549e2f7ae116afd303f32e1950cb790a1d ] The Cavium ThunderX Random Number Generator is only present on Cavium ThunderX SoCs, and not available as an independent PCIe endpoint. Hence add a dependency on ARCH_THUNDER, to prevent asking the user about this driver when configuring a kernel without Cavium Thunder SoC support. Fixes: cc2f1908c6b8f625 ("hwrng: cavium - Add Cavium HWRNG driver for ThunderX SoC.") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-08hwrng: cavium - Check health status while reading random dataSunil Goutham3-17/+190
[ Upstream commit 680efb33546be8960ccbb2f4e0e43034d9c93b30 ] This RNG device is present on Marvell OcteonTx2 silicons as well and also provides entropy health status. HW continuously checks health condition of entropy and reports faults. Fault is in terms of co-processor cycles since last fault detected. This doesn't get cleared and only updated when new fault is detected. Also there are chances of detecting false positives. So to detect a entropy failure SW has to check if failures are persistent ie cycles elapsed is frequently updated by HW. This patch adds support to detect health failures using below algo. 1. Consider any fault detected before 10ms as a false positive and ignore. 10ms is chosen randomly, no significance. 2. Upon first failure detection make a note of cycles elapsed and when this error happened in realtime (cntvct). 3. Upon subsequent failure, check if this is new or a old one by comparing current cycles with the ones since last failure. cycles or time since last failure is calculated using cycles and time info captured at (2). HEALTH_CHECK status register is not available to VF, hence had to map PF registers. Also since cycles are in terms of co-processor cycles, had to retrieve co-processor clock rate from RST device. Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-08regulator: qcom_smd: fix for_each_child.cocci warningskernel test robot1-1/+3
[ Upstream commit 6390d42c21efff0b4c10956a38e341f4e84ecd3d ] drivers/regulator/qcom_smd-regulator.c:1318:1-33: WARNING: Function "for_each_available_child_of_node" should have of_node_put() before return around line 1321. Semantic patch information: False positives can be due to function calls within the for_each loop that may encapsulate an of_node_put. Generated by: scripts/coccinelle/iterators/for_each_child.cocci Fixes: 14e2976fbabd ("regulator: qcom_smd: Align probe function with rpmh-regulator") CC: Konrad Dybcio <konrad.dybcio@somainline.org> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: kernel test robot <lkp@intel.com> Signed-off-by: Julia Lawall <julia.lawall@inria.fr> Link: https://lore.kernel.org/r/alpine.DEB.2.22.394.2201151210170.3051@hadrien Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-08PCI: xgene: Revert "PCI: xgene: Fix IB window setup"Marc Zyngier1-1/+1
commit 825da4e9cec68713fbb02dc6f71fe1bf65fe8050 upstream. Commit c7a75d07827a ("PCI: xgene: Fix IB window setup") tried to fix the damages that 6dce5aa59e0b ("PCI: xgene: Use inbound resources for setup") caused, but actually didn't improve anything for some plarforms (at least Mustang and m400 are still broken). Given that 6dce5aa59e0b has been reverted, revert this patch as well, restoring the PCIe support on XGene to its pre-5.5, working state. Link: https://lore.kernel.org/r/YjN8pT5e6/8cRohQ@xps13.dannf Link: https://lore.kernel.org/r/20220321104843.949645-3-maz@kernel.org Fixes: c7a75d07827a ("PCI: xgene: Fix IB window setup") Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: stable@vger.kernel.org Cc: Rob Herring <robh@kernel.org> Cc: Toan Le <toan@os.amperecomputing.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Krzysztof Wilczyński <kw@linux.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Stéphane Graber <stgraber@ubuntu.com> Cc: dann frazier <dann.frazier@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-08PCI: pciehp: Clear cmd_busy bit in polling modeLiguang Zhang1-0/+2
commit 92912b175178c7e895f5e5e9f1e30ac30319162b upstream. Writes to a Downstream Port's Slot Control register are PCIe hotplug "commands." If the Port supports Command Completed events, software must wait for a command to complete before writing to Slot Control again. pcie_do_write_cmd() sets ctrl->cmd_busy when it writes to Slot Control. If software notification is enabled, i.e., PCI_EXP_SLTCTL_HPIE and PCI_EXP_SLTCTL_CCIE are set, ctrl->cmd_busy is cleared by pciehp_isr(). But when software notification is disabled, as it is when pcie_init() powers off an empty slot, pcie_wait_cmd() uses pcie_poll_cmd() to poll for command completion, and it neglects to clear ctrl->cmd_busy, which leads to spurious timeouts: pcieport 0000:00:03.0: pciehp: Timeout on hotplug command 0x01c0 (issued 2264 msec ago) pcieport 0000:00:03.0: pciehp: Timeout on hotplug command 0x05c0 (issued 2288 msec ago) Clear ctrl->cmd_busy in pcie_poll_cmd() when it detects a Command Completed event (PCI_EXP_SLTSTA_CC). [bhelgaas: commit log] Fixes: a5dd4b4b0570 ("PCI: pciehp: Wait for hotplug command completion where necessary") Link: https://lore.kernel.org/r/20211111054258.7309-1-zhangliguang@linux.alibaba.com Link: https://bugzilla.kernel.org/show_bug.cgi?id=215143 Link: https://lore.kernel.org/r/20211126173309.GA12255@wunner.de Signed-off-by: Liguang Zhang <zhangliguang@linux.alibaba.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Lukas Wunner <lukas@wunner.de> Cc: stable@vger.kernel.org # v4.19+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-08drm/i915/gem: add missing boundary check in vm_accessMastan Katragadda1-1/+1
commit 3886a86e7e6cc6ce2ce93c440fecd8f42aed0ce7 upstream. A missing bounds check in vm_access() can lead to an out-of-bounds read or write in the adjacent memory area, since the len attribute is not validated before the memcpy later in the function, potentially hitting: [ 183.637831] BUG: unable to handle page fault for address: ffffc90000c86000 [ 183.637934] #PF: supervisor read access in kernel mode [ 183.637997] #PF: error_code(0x0000) - not-present page [ 183.638059] PGD 100000067 P4D 100000067 PUD 100258067 PMD 106341067 PTE 0 [ 183.638144] Oops: 0000 [#2] PREEMPT SMP NOPTI [ 183.638201] CPU: 3 PID: 1790 Comm: poc Tainted: G D 5.17.0-rc6-ci-drm-11296+ #1 [ 183.638298] Hardware name: Intel Corporation CoffeeLake Client Platform/CoffeeLake H DDR4 RVP, BIOS CNLSFWR1.R00.X208.B00.1905301319 05/30/2019 [ 183.638430] RIP: 0010:memcpy_erms+0x6/0x10 [ 183.640213] RSP: 0018:ffffc90001763d48 EFLAGS: 00010246 [ 183.641117] RAX: ffff888109c14000 RBX: ffff888111bece40 RCX: 0000000000000ffc [ 183.642029] RDX: 0000000000001000 RSI: ffffc90000c86000 RDI: ffff888109c14004 [ 183.642946] RBP: 0000000000000ffc R08: 800000000000016b R09: 0000000000000000 [ 183.643848] R10: ffffc90000c85000 R11: 0000000000000048 R12: 0000000000001000 [ 183.644742] R13: ffff888111bed190 R14: ffff888109c14000 R15: 0000000000001000 [ 183.645653] FS: 00007fe5ef807540(0000) GS:ffff88845b380000(0000) knlGS:0000000000000000 [ 183.646570] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 183.647481] CR2: ffffc90000c86000 CR3: 000000010ff02006 CR4: 00000000003706e0 [ 183.648384] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 183.649271] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 183.650142] Call Trace: [ 183.650988] <TASK> [ 183.651793] vm_access+0x1f0/0x2a0 [i915] [ 183.652726] __access_remote_vm+0x224/0x380 [ 183.653561] mem_rw.isra.0+0xf9/0x190 [ 183.654402] vfs_read+0x9d/0x1b0 [ 183.655238] ksys_read+0x63/0xe0 [ 183.656065] do_syscall_64+0x38/0xc0 [ 183.656882] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 183.657663] RIP: 0033:0x7fe5ef725142 [ 183.659351] RSP: 002b:00007ffe1e81c7e8 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 [ 183.660227] RAX: ffffffffffffffda RBX: 0000557055dfb780 RCX: 00007fe5ef725142 [ 183.661104] RDX: 0000000000001000 RSI: 00007ffe1e81d880 RDI: 0000000000000005 [ 183.661972] RBP: 00007ffe1e81e890 R08: 0000000000000030 R09: 0000000000000046 [ 183.662832] R10: 0000557055dfc2e0 R11: 0000000000000246 R12: 0000557055dfb1c0 [ 183.663691] R13: 00007ffe1e81e980 R14: 0000000000000000 R15: 0000000000000000 Changes since v1: - Updated if condition with range_overflows_t [Chris Wilson] Fixes: 9f909e215fea ("drm/i915: Implement vm_ops->access for gdb access into mmaps") Signed-off-by: Mastan Katragadda <mastanx.katragadda@intel.com> Suggested-by: Adam Zabrocki <adamza@microsoft.com> Reported-by: Jackson Cody <cody.jackson@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Jon Bloomfield <jon.bloomfield@intel.com> Cc: Sudeep Dutt <sudeep.dutt@intel.com> Cc: <stable@vger.kernel.org> # v5.8+ Reviewed-by: Matthew Auld <matthew.auld@intel.com> [mauld: tidy up the commit message and add Cc: stable] Signed-off-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220303060428.1668844-1-mastanx.katragadda@intel.com (cherry picked from commit 661412e301e2ca86799aa4f400d1cf0bd38c57c6) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-08drm/i915/opregion: check port number bounds for SWSCI display power stateJani Nikula1-0/+15
commit 24a644ebbfd3b13cda702f98907f9dd123e34bf9 upstream. The mapping from enum port to whatever port numbering scheme is used by the SWSCI Display Power State Notification is odd, and the memory of it has faded. In any case, the parameter only has space for ports numbered [0..4], and UBSAN reports bit shift beyond it when the platform has port F or more. Since the SWSCI functionality is supposed to be obsolete for new platforms (i.e. ones that might have port F or more), just bail out early if the mapped and mangled port number is beyond what the Display Power State Notification can support. Fixes: 9c4b0a683193 ("drm/i915: add opregion function to notify bios of encoder enable/disable") Cc: <stable@vger.kernel.org> # v3.13+ Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/4800 Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/cc363f42d6b5a5932b6d218fefcc8bdfb15dbbe5.1644489329.git.jani.nikula@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-08brcmfmac: pcie: Fix crashes due to early IRQsHector Martin1-3/+13
commit b50255c83b914defd61a57fbc81d452334b63f4c upstream. The driver was enabling IRQs before the message processing was initialized. This could cause IRQs to come in too early and crash the driver. Instead, move the IRQ enable and hostready to a bus preinit function, at which point everything is properly initialized. Fixes: 9e37f045d5e7 ("brcmfmac: Adding PCIe bus layer support.") Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com> Cc: stable@vger.kernel.org Signed-off-by: Hector Martin <marcan@marcan.st> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220131160713.245637-7-marcan@marcan.st Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-08brcmfmac: pcie: Replace brcmf_pcie_copy_mem_todev with memcpy_toioHector Martin1-44/+4
commit 9466987f246758eb7e9071ae58005253f631271e upstream. The alignment check was wrong (e.g. & 4 instead of & 3), and the logic was also inefficient if the length was not a multiple of 4, since it would needlessly fall back to copying the entire buffer bytewise. We already have a perfectly good memcpy_toio function, so just call that instead of rolling our own copy logic here. brcmf_pcie_init_ringbuffers was already using it anyway. Fixes: 9e37f045d5e7 ("brcmfmac: Adding PCIe bus layer support.") Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Hector Martin <marcan@marcan.st> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220131160713.245637-6-marcan@marcan.st Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-08brcmfmac: pcie: Release firmwares in the brcmf_pcie_setup error pathHector Martin1-0/+2
commit 5e90f0f3ead014867dade7a22f93958119f5efab upstream. This avoids leaking memory if brcmf_chip_get_raminfo fails. Note that the CLM blob is released in the device remove path. Fixes: 82f93cf46d60 ("brcmfmac: get chip's default RAM info during PCIe setup") Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com> Cc: stable@vger.kernel.org Signed-off-by: Hector Martin <marcan@marcan.st> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220131160713.245637-2-marcan@marcan.st Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-08brcmfmac: firmware: Allocate space for default boardrev in nvramHector Martin1-0/+2
commit d19d8e3ba256f81ea4a27209dbbd1f0a00ef1903 upstream. If boardrev is missing from the NVRAM we add a default one, but this might need more space in the output buffer than was allocated. Ensure we have enough padding for this in the buffer. Fixes: 46f2b38a91b0 ("brcmfmac: insert default boardrev in nvram data if missing") Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com> Cc: stable@vger.kernel.org Signed-off-by: Hector Martin <marcan@marcan.st> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220131160713.245637-3-marcan@marcan.st Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-08media: davinci: vpif: fix unbalanced runtime PM enableJohan Hovold1-2/+9
commit d42b3ad105b5d3481f6a56bc789aa2b27aa09325 upstream. Make sure to disable runtime PM before returning on probe errors. Fixes: 479f7a118105 ("[media] davinci: vpif: adaptions for DT support") Cc: stable@vger.kernel.org Cc: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-08media: davinci: vpif: fix unbalanced runtime PM getJohan Hovold1-0/+1
commit 4a321de239213300a714fa0353a5f1272d381a44 upstream. Make sure to balance the runtime PM usage counter on driver unbind. Fixes: 407ccc65bfd2 ("[media] davinci: vpif: add pm_runtime support") Cc: stable@vger.kernel.org # 3.9 Cc: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org> Reviewed-by: Lad Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-08media: gpio-ir-tx: fix transmit with long spaces on Orange Pi PCSean Young1-7/+21
commit 5ad05ecad4326ddaa26a83ba2233a67be24c1aaa upstream. Calling udelay for than 1000us does not always yield the correct results. Cc: stable@vger.kernel.org Reported-by: Михаил <vrserver1@gmail.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-08bcache: fixup multiple threads crashMingzhe Zou2-4/+8
commit 887554ab96588de2917b6c8c73e552da082e5368 upstream. When multiple threads to check btree nodes in parallel, the main thread wait for all threads to stop or CACHE_SET_IO_DISABLE flag: wait_event_interruptible(check_state->wait, atomic_read(&check_state->started) == 0 || test_bit(CACHE_SET_IO_DISABLE, &c->flags)); However, the bch_btree_node_read and bch_btree_node_read_done maybe call bch_cache_set_error, then the CACHE_SET_IO_DISABLE will be set. If the flag already set, the main thread return error. At the same time, maybe some threads still running and read NULL pointer, the kernel will crash. This patch change the event wait condition, the main thread must wait for all threads to stop. Fixes: 8e7102273f597 ("bcache: make bch_btree_check() to be multithreaded") Signed-off-by: Mingzhe Zou <mingzhe.zou@easystack.cn> Cc: stable@vger.kernel.org # v5.7+ Signed-off-by: Coly Li <colyli@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-08thermal: int340x: Increase bitmap sizeSrinivas Pandruvada1-1/+1
commit 668f69a5f863b877bc3ae129efe9a80b6f055141 upstream. The number of policies are 10, so can't be supported by the bitmap size of u8. Even though there are no platfoms with these many policies, but for correctness increase to u32. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Fixes: 16fc8eca1975 ("thermal/int340x_thermal: Add additional UUIDs") Cc: 5.1+ <stable@vger.kernel.org> # 5.1+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-08pstore: Don't use semaphores in always-atomic-context codeJann Horn1-1/+1
commit 8126b1c73108bc691f5643df19071a59a69d0bc6 upstream. pstore_dump() is *always* invoked in atomic context (nowadays in an RCU read-side critical section, before that under a spinlock). It doesn't make sense to try to use semaphores here. This is mostly a revert of commit ea84b580b955 ("pstore: Convert buf_lock to semaphore"), except that two parts aren't restored back exactly as they were: - keep the lock initialization in pstore_register - in efi_pstore_write(), always set the "block" flag to false - omit "is_locked", that was unnecessary since commit 959217c84c27 ("pstore: Actually give up during locking failure") - fix the bailout message The actual problem that the buggy commit was trying to address may have been that the use of preemptible() in efi_pstore_write() was wrong - it only looks at preempt_count() and the state of IRQs, but __rcu_read_lock() doesn't touch either of those under CONFIG_PREEMPT_RCU. (Sidenote: CONFIG_PREEMPT_RCU means that the scheduler can preempt tasks in RCU read-side critical sections, but you're not allowed to actively block/reschedule.) Lockdep probably never caught the problem because it's very rare that you actually hit the contended case, so lockdep always just sees the down_trylock(), not the down_interruptible(), and so it can't tell that there's a problem. Fixes: ea84b580b955 ("pstore: Convert buf_lock to semaphore") Cc: stable@vger.kernel.org Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20220314185953.2068993-1-jannh@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-08carl9170: fix missing bit-wise or operator for tx_paramsColin Ian King1-1/+1
commit 02a95374b5eebdbd3b6413fd7ddec151d2ea75a1 upstream. Currently tx_params is being re-assigned with a new value and the previous setting IEEE80211_HT_MCS_TX_RX_DIFF is being overwritten. The assignment operator is incorrect, the original intent was to bit-wise or the value in. Fix this by replacing the = operator with |= instead. Kudos to Christian Lamparter for suggesting the correct fix. Fixes: fe8ee9ad80b2 ("carl9170: mac80211 glue and command interface") Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Cc: <Stable@vger.kernel.org> Acked-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220125004406.344422-1-colin.i.king@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-08mgag200 fix memmapsl configuration in GCTL6 registerJocelyn Falempe1-1/+4
commit 028a73e10705af1ffd51f2537460f616dc58680e upstream. On some servers with MGA G200_SE_A (rev 42), booting with Legacy BIOS, the hardware hangs when using kdump and kexec into the kdump kernel. This happens when the uncompress code tries to write "Decompressing Linux" to the VGA Console. It can be reproduced by writing to the VGA console (0xB8000) after booting to graphic mode, it generates the following error: kernel:NMI: PCI system error (SERR) for reason a0 on CPU 0. kernel:Dazed and confused, but trying to continue The root cause is the configuration of the MGA GCTL6 register According to the GCTL6 register documentation: bit 0 is gcgrmode: 0: Enables alpha mode, and the character generator addressing system is activated. 1: Enables graphics mode, and the character addressing system is not used. bit 1 is chainodd even: 0: The A0 signal of the memory address bus is used during system memory addressing. 1: Allows A0 to be replaced by either the A16 signal of the system address (ifmemmapsl is ‘00’), or by the hpgoddev (MISC<5>, odd/even page select) field, described on page 3-294). bit 3-2 are memmapsl: Memory map select bits 1 and 0. VGA. These bits select where the video memory is mapped, as shown below: 00 => A0000h - BFFFFh 01 => A0000h - AFFFFh 10 => B0000h - B7FFFh 11 => B8000h - BFFFFh bit 7-4 are reserved. Current code set it to 0x05 => memmapsl to b01 => 0xa0000 (graphic mode) But on x86, the VGA console is at 0xb8000 (text mode) In arch/x86/boot/compressed/misc.c debug strings are written to 0xb8000 As the driver doesn't use this mapping at 0xa0000, it is safe to set it to 0xb8000 instead, to avoid kernel hang on G200_SE_A rev42, with kexec/kdump. Thus changing the value 0x05 to 0x0d Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Acked-by: Lyude Paul <lyude@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20220119102905.1194787-1-jfalempe@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-08video: fbdev: atari: Atari 2 bpp (STe) palette bugfixMichael Schmitz1-6/+6
commit c8be5edbd36ceed2ff3d6b8f8e40643c3f396ea3 upstream. The code to set the shifter STe palette registers has a long standing operator precedence bug, manifesting as colors set on a 2 bits per pixel frame buffer coming up with a distinctive blue tint. Add parentheses around the calculation of the per-color palette data before shifting those into their respective bit field position. This bug goes back a long way (2.4 days at the very least) so there won't be a Fixes: tag. Tested on ARAnyM as well on Falcon030 hardware. Cc: stable@vger.kernel.org Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Link: https://lore.kernel.org/all/CAMuHMdU3ievhXxKR_xi_v3aumnYW7UNUO6qMdhgfyWTyVSsCkQ@mail.gmail.com Tested-by: Michael Schmitz <schmitzmic@gmail.com> Tested-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Michael Schmitz <schmitzmic@gmail.com> Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-08video: fbdev: sm712fb: Fix crash in smtcfb_read()Helge Deller1-18/+7
commit bd771cf5c4254511cc4abb88f3dab3bd58bdf8e8 upstream. Zheyu Ma reported this crash in the sm712fb driver when reading three bytes from the framebuffer: BUG: unable to handle page fault for address: ffffc90001ffffff RIP: 0010:smtcfb_read+0x230/0x3e0 Call Trace: vfs_read+0x198/0xa00 ? do_sys_openat2+0x27d/0x350 ? __fget_light+0x54/0x340 ksys_read+0xce/0x190 do_syscall_64+0x43/0x90 Fix it by removing the open-coded endianess fixup-code and by moving the pointer post decrement out the fb_readl() function. Reported-by: Zheyu Ma <zheyuma97@gmail.com> Signed-off-by: Helge Deller <deller@gmx.de> Tested-by: Zheyu Ma <zheyuma97@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-08drm/edid: check basic audio support on CEA extension blockCooper Chiou1-1/+2
commit 5662abf6e21338be6d085d6375d3732ac6147fd2 upstream. Tag code stored in bit7:5 for CTA block byte[3] is not the same as CEA extension block definition. Only check CEA block has basic audio support. v3: update commit message. Cc: stable@vger.kernel.org Cc: Jani Nikula <jani.nikula@intel.com> Cc: Shawn C Lee <shawn.c.lee@intel.com> Cc: intel-gfx <intel-gfx@lists.freedesktop.org> Signed-off-by: Cooper Chiou <cooper.chiou@intel.com> Signed-off-by: Lee Shawn C <shawn.c.lee@intel.com> Fixes: e28ad544f462 ("drm/edid: parse CEA blocks embedded in DisplayID") Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220324061218.32739-1-shawn.c.lee@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-08mailbox: tegra-hsp: Flush whole channelPekka Pessi1-0/+5
commit 60de2d2dc284e0dd1c2c897d08625bde24ef3454 upstream. The txdone can re-fill the mailbox. Keep polling the mailbox during the flush until all the messages have been delivered. This fixes an issue with the Tegra Combined UART (TCU) where output can get truncated under high traffic load. Signed-off-by: Pekka Pessi <ppessi@nvidia.com> Tested-by: Jon Hunter <jonathanh@nvidia.com> Fixes: 91b1b1c3da8a ("mailbox: tegra-hsp: Add support for shared mailboxes") Cc: stable@vger.kernel.org Signed-off-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-08drivers: hamradio: 6pack: fix UAF bug caused by mod_timer()Duoming Zhou1-2/+2
commit efe4186e6a1b54bf38b9e05450d43b0da1fd7739 upstream. When a 6pack device is detaching, the sixpack_close() will act to cleanup necessary resources. Although del_timer_sync() in sixpack_close() won't return if there is an active timer, one could use mod_timer() in sp_xmit_on_air() to wake up timer again by calling userspace syscall such as ax25_sendmsg(), ax25_connect() and ax25_ioctl(). This unexpected waked handler, sp_xmit_on_air(), realizes nothing about the undergoing cleanup and may still call pty_write() to use driver layer resources that have already been released. One of the possible race conditions is shown below: (USE) | (FREE) ax25_sendmsg() | ax25_queue_xmit() | ... | sp_xmit() | sp_encaps() | sixpack_close() sp_xmit_on_air() | del_timer_sync(&sp->tx_t) mod_timer(&sp->tx_t,...) | ... | unregister_netdev() | ... (wait a while) | tty_release() | tty_release_struct() | release_tty() sp_xmit_on_air() | tty_kref_put(tty_struct) //FREE pty_write(tty_struct) //USE | ... The corresponding fail log is shown below: =============================================================== BUG: KASAN: use-after-free in __run_timers.part.0+0x170/0x470 Write of size 8 at addr ffff88800a652ab8 by task swapper/2/0 ... Call Trace: ... queue_work_on+0x3f/0x50 pty_write+0xcd/0xe0pty_write+0xcd/0xe0 sp_xmit_on_air+0xb2/0x1f0 call_timer_fn+0x28/0x150 __run_timers.part.0+0x3c2/0x470 run_timer_softirq+0x3b/0x80 __do_softirq+0xf1/0x380 ... This patch reorders the del_timer_sync() after the unregister_netdev() to avoid UAF bugs. Because the unregister_netdev() is well synchronized, it flushs out any pending queues, waits the refcount of net_device decreases to zero and removes net_device from kernel. There is not any running routines after executing unregister_netdev(). Therefore, we could not arouse timer from userspace again. Signed-off-by: Duoming Zhou <duoming@zju.edu.cn> Reviewed-by: Lin Ma <linma@zju.edu.cn> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-08ACPI: properties: Consistently return -ENOENT if there are no more referencesSakari Ailus1-1/+1
commit babc92da5928f81af951663fc436997352e02d3a upstream. __acpi_node_get_property_reference() is documented to return -ENOENT if the caller requests a property reference at an index that does not exist, not -EINVAL which it actually does. Fix this by returning -ENOENT consistenly, independently of whether the property value is a plain reference or a package. Fixes: c343bc2ce2c6 ("ACPI: properties: Align return codes of __acpi_node_get_property_reference()") Cc: 4.14+ <stable@vger.kernel.org> # 4.14+ Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-08udp: call udp_encap_enable for v6 sockets when enabling encapXin Long1-6/+0
commit a4a600dd301ccde6ea239804ec1f19364a39d643 upstream. When enabling encap for a ipv6 socket without udp_encap_needed_key increased, UDP GRO won't work for v4 mapped v6 address packets as sk will be NULL in udp4_gro_receive(). This patch is to enable it by increasing udp_encap_needed_key for v6 sockets in udp_tunnel_encap_enable(), and correspondingly decrease udp_encap_needed_key in udpv6_destroy_sock(). v1->v2: - add udp_encap_disable() and export it. v2->v3: - add the change for rxrpc and bareudp into one patch, as Alex suggested. v3->v4: - move rxrpc part to another patch. Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Tested-by: Antonio Quartulli <antonio@openvpn.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-08drbd: fix potential silent data corruptionLars Ellenberg1-1/+2
commit f4329d1f848ac35757d9cc5487669d19dfc5979c upstream. Scenario: --------- bio chain generated by blk_queue_split(). Some split bio fails and propagates its error status to the "parent" bio. But then the (last part of the) parent bio itself completes without error. We would clobber the already recorded error status with BLK_STS_OK, causing silent data corruption. Reproducer: ----------- How to trigger this in the real world within seconds: DRBD on top of degraded parity raid, small stripe_cache_size, large read_ahead setting. Drop page cache (sysctl vm.drop_caches=1, fadvise "DONTNEED", umount and mount again, "reboot"). Cause significant read ahead. Large read ahead request is split by blk_queue_split(). Parts of the read ahead that are already in the stripe cache, or find an available stripe cache to use, can be serviced. Parts of the read ahead that would need "too much work", would need to wait for a "stripe_head" to become available, are rejected immediately. For larger read ahead requests that are split in many pieces, it is very likely that some "splits" will be serviced, but then the stripe cache is exhausted/busy, and the remaining ones will be rejected. Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> Cc: <stable@vger.kernel.org> # 4.13.x Link: https://lore.kernel.org/r/20220330185551.3553196-1-christoph.boehmwalder@linbit.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-08dm integrity: set journal entry unused when shrinking deviceMikulas Patocka1-2/+4
commit cc09e8a9dec4f0e8299e80a7a2a8e6f54164a10b upstream. Commit f6f72f32c22c ("dm integrity: don't replay journal data past the end of the device") skips journal replay if the target sector points beyond the end of the device. Unfortunatelly, it doesn't set the journal entry unused, which resulted in this BUG being triggered: BUG_ON(!journal_entry_is_unused(je)) Fix this by calling journal_entry_set_unused() for this case. Fixes: f6f72f32c22c ("dm integrity: don't replay journal data past the end of the device") Cc: stable@vger.kernel.org # v5.7+ Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Tested-by: Milan Broz <gmazyland@gmail.com> [snitzer: revised header] Signed-off-by: Mike Snitzer <snitzer@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-08Revert "Input: clear BTN_RIGHT/MIDDLE on buttonpads"José Expósito1-6/+0
commit 8b188fba75195745026e11d408e4a7e94e01d701 upstream. This reverts commit 37ef4c19b4c659926ce65a7ac709ceaefb211c40. The touchpad present in the Dell Precision 7550 and 7750 laptops reports a HID_DG_BUTTONTYPE of type MT_BUTTONTYPE_CLICKPAD. However, the device is not a clickpad, it is a touchpad with physical buttons. In order to fix this issue, a quirk for the device was introduced in libinput [1] [2] to disable the INPUT_PROP_BUTTONPAD property: [Precision 7x50 Touchpad] MatchBus=i2c MatchUdevType=touchpad MatchDMIModalias=dmi:*svnDellInc.:pnPrecision7?50* AttrInputPropDisable=INPUT_PROP_BUTTONPAD However, because of the change introduced in 37ef4c19b4 ("Input: clear BTN_RIGHT/MIDDLE on buttonpads") the BTN_RIGHT key bit is not mapped anymore breaking the device right click button and making impossible to workaround it in user space. In order to avoid breakage on other present or future devices, revert the patch causing the issue. Signed-off-by: José Expósito <jose.exposito89@gmail.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Peter Hutterer <peter.hutterer@who-t.net> Ack