summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2021-05-26nvme-fc: clear q_live at beginning of association teardownJames Smart1-0/+12
[ Upstream commit a7d139145a6640172516b193abf6d2398620aa14 ] The __nvmf_check_ready() routine used to bounce all filesystem io if the controller state isn't LIVE. However, a later patch changed the logic so that it rejection ends up being based on the Q live check. The FC transport has a slightly different sequence from rdma and tcp for shutting down queues/marking them non-live. FC marks its queue non-live after aborting all ios and waiting for their termination, leaving a rather large window for filesystem io to continue to hit the transport. Unfortunately this resulted in filesystem I/O or applications seeing I/O errors. Change the FC transport to mark the queues non-live at the first sign of teardown for the association (when I/O is initially terminated). Fixes: 73a5379937ec ("nvme-fabrics: allow to queue requests for live queues") Signed-off-by: James Smart <jsmart2021@gmail.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-26nvme-tcp: rerun io_work if req_list is not emptyKeith Busch1-1/+2
[ Upstream commit a0fdd1418007f83565d3f2e04b47923ba93a9b8c ] A possible race condition exists where the request to send data is enqueued from nvme_tcp_handle_r2t()'s will not be observed by nvme_tcp_send_all() if it happens to be running. The driver relies on io_work to send the enqueued request when it is runs again, but the concurrently running nvme_tcp_send_all() may not have released the send_mutex at that time. If no future commands are enqueued to re-kick the io_work, the request will timeout in the SEND_H2C state, resulting in a timeout error like: nvme nvme0: queue 1: timeout request 0x3 type 6 Ensure the io_work continues to run as long as the req_list is not empty. Fixes: db5ad6b7f8cdd ("nvme-tcp: try to send request in queue_rq context") Signed-off-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-26nvme-loop: fix memory leak in nvme_loop_create_ctrl()Wu Bo1-1/+3
[ Upstream commit 03504e3b54cc8118cc26c064e60a0b00c2308708 ] When creating loop ctrl in nvme_loop_create_ctrl(), if nvme_init_ctrl() fails, the loop ctrl should be freed before jumping to the "out" label. Fixes: 3a85a5de29ea ("nvme-loop: add a NVMe loopback host driver") Signed-off-by: Wu Bo <wubo40@huawei.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-26nvmet: fix memory leak in nvmet_alloc_ctrl()Wu Bo1-1/+1
[ Upstream commit fec356a61aa3d3a66416b4321f1279e09e0f256f ] When creating ctrl in nvmet_alloc_ctrl(), if the cntlid_min is larger than cntlid_max of the subsystem, and jumps to the "out_free_changed_ns_list" label, but the ctrl->sqs lack of be freed. Fix this by jumping to the "out_free_sqs" label. Fixes: 94a39d61f80f ("nvmet: make ctrl-id configurable") Signed-off-by: Wu Bo <wubo40@huawei.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-26nvmet: remove unused ctrl->cqsAmit2-14/+2
[ Upstream commit 6d65aeab7bf6e83e75f53cfdbdb84603e52e1182 ] remove unused cqs from nvmet_ctrl struct this will reduce the allocated memory. Signed-off-by: Amit <amit.engel@dell.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-26RDMA/core: Don't access cm_id after its destructionShay Drory1-2/+3
[ Upstream commit 889d916b6f8a48b8c9489fffcad3b78eedd01a51 ] restrack should only be attached to a cm_id while the ID has a valid device pointer. It is set up when the device is first loaded, but not cleared when the device is removed. There is also two copies of the device pointer, one private and one in the public API, and these were left out of sync. Make everything go to NULL together and manipulate restrack right around the device assignments. Found by syzcaller: BUG: KASAN: wild-memory-access in __list_del include/linux/list.h:112 [inline] BUG: KASAN: wild-memory-access in __list_del_entry include/linux/list.h:135 [inline] BUG: KASAN: wild-memory-access in list_del include/linux/list.h:146 [inline] BUG: KASAN: wild-memory-access in cma_cancel_listens drivers/infiniband/core/cma.c:1767 [inline] BUG: KASAN: wild-memory-access in cma_cancel_operation drivers/infiniband/core/cma.c:1795 [inline] BUG: KASAN: wild-memory-access in cma_cancel_operation+0x1f4/0x4b0 drivers/infiniband/core/cma.c:1783 Write of size 8 at addr dead000000000108 by task syz-executor716/334 CPU: 0 PID: 334 Comm: syz-executor716 Not tainted 5.11.0+ #271 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:79 [inline] dump_stack+0xbe/0xf9 lib/dump_stack.c:120 __kasan_report mm/kasan/report.c:400 [inline] kasan_report.cold+0x5f/0xd5 mm/kasan/report.c:413 __list_del include/linux/list.h:112 [inline] __list_del_entry include/linux/list.h:135 [inline] list_del include/linux/list.h:146 [inline] cma_cancel_listens drivers/infiniband/core/cma.c:1767 [inline] cma_cancel_operation drivers/infiniband/core/cma.c:1795 [inline] cma_cancel_operation+0x1f4/0x4b0 drivers/infiniband/core/cma.c:1783 _destroy_id+0x29/0x460 drivers/infiniband/core/cma.c:1862 ucma_close_id+0x36/0x50 drivers/infiniband/core/ucma.c:185 ucma_destroy_private_ctx+0x58d/0x5b0 drivers/infiniband/core/ucma.c:576 ucma_close+0x91/0xd0 drivers/infiniband/core/ucma.c:1797 __fput+0x169/0x540 fs/file_table.c:280 task_work_run+0xb7/0x100 kernel/task_work.c:140 exit_task_work include/linux/task_work.h:30 [inline] do_exit+0x7da/0x17f0 kernel/exit.c:825 do_group_exit+0x9e/0x190 kernel/exit.c:922 __do_sys_exit_group kernel/exit.c:933 [inline] __se_sys_exit_group kernel/exit.c:931 [inline] __x64_sys_exit_group+0x2d/0x30 kernel/exit.c:931 do_syscall_64+0x2d/0x40 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 255d0c14b375 ("RDMA/cma: rdma_bind_addr() leaks a cma_dev reference count") Link: https://lore.kernel.org/r/3352ee288fe34f2b44220457a29bfc0548686363.1620711734.git.leonro@nvidia.com Signed-off-by: Shay Drory <shayd@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-26RDMA/mlx5: Recover from fatal event in dual port modeMaor Gottlieb1-0/+1
[ Upstream commit 97f30d324ce6645a4de4ffb71e4ae9b8ca36ff04 ] When there is fatal event on the slave port, the device is marked as not active. We need to mark it as active again when the slave is recovered to regain full functionality. Fixes: d69a24e03659 ("IB/mlx5: Move IB event processing onto a workqueue") Link: https://lore.kernel.org/r/8906754455bb23019ef223c725d2c0d38acfb80b.1620711734.git.leonro@nvidia.com Signed-off-by: Maor Gottlieb <maorg@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-26scsi: qla2xxx: Fix error return code in qla82xx_write_flash_dword()Zhen Lei1-1/+2
[ Upstream commit 5cb289bf2d7c34ca1abd794ce116c4f19185a1d4 ] Fix to return a negative error code from the error handling case instead of 0 as done elsewhere in this function. Link: https://lore.kernel.org/r/20210514090952.6715-1-thunder.leizhen@huawei.com Fixes: a9083016a531 ("[SCSI] qla2xxx: Add ISP82XX support.") Reported-by: Hulk Robot <hulkci@huawei.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-26scsi: qedf: Add pointer checks in qedf_update_link_speed()Javed Hasan1-1/+3
[ Upstream commit 73578af92a0fae6609b955fcc9113e50e413c80f ] The following trace was observed: [ 14.042059] Call Trace: [ 14.042061] <IRQ> [ 14.042068] qedf_link_update+0x144/0x1f0 [qedf] [ 14.042117] qed_link_update+0x5c/0x80 [qed] [ 14.042135] qed_mcp_handle_link_change+0x2d2/0x410 [qed] [ 14.042155] ? qed_set_ptt+0x70/0x80 [qed] [ 14.042170] ? qed_set_ptt+0x70/0x80 [qed] [ 14.042186] ? qed_rd+0x13/0x40 [qed] [ 14.042205] qed_mcp_handle_events+0x437/0x690 [qed] [ 14.042221] ? qed_set_ptt+0x70/0x80 [qed] [ 14.042239] qed_int_sp_dpc+0x3a6/0x3e0 [qed] [ 14.042245] tasklet_action_common.isra.14+0x5a/0x100 [ 14.042250] __do_softirq+0xe4/0x2f8 [ 14.042253] irq_exit+0xf7/0x100 [ 14.042255] do_IRQ+0x7f/0xd0 [ 14.042257] common_interrupt+0xf/0xf [ 14.042259] </IRQ> API qedf_link_update() is getting called from QED but by that time shost_data is not initialised. This results in a NULL pointer dereference when we try to dereference shost_data while updating supported_speeds. Add a NULL pointer check before dereferencing shost_data. Link: https://lore.kernel.org/r/20210512072533.23618-1-jhasan@marvell.com Fixes: 61d8658b4a43 ("scsi: qedf: Add QLogic FastLinQ offload FCoE driver framework.") Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Javed Hasan <jhasan@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-26scsi: ufs: core: Increase the usable queue depthBart Van Assche1-1/+4
[ Upstream commit d0b2b70eb12e9ffaf95e11b16b230a4e015a536c ] With the current implementation of the UFS driver active_queues is 1 instead of 0 if all UFS request queues are idle. That causes hctx_may_queue() to divide the queue depth by 2 when queueing a request and hence reduces the usable queue depth. The shared tag set code in the block layer keeps track of the number of active request queues. blk_mq_tag_busy() is called before a request is queued onto a hwq and blk_mq_tag_idle() is called some time after the hwq became idle. blk_mq_tag_idle() is called from inside blk_mq_timeout_work(). Hence, blk_mq_tag_idle() is only called if a timer is associated with each request that is submitted to a request queue that shares a tag set with another request queue. Adds a blk_mq_start_request() call in ufshcd_exec_dev_cmd(). This doubles the queue depth on my test setup from 16 to 32. In addition to increasing the usable queue depth, also fix the documentation of the 'timeout' parameter in the header above ufshcd_exec_dev_cmd(). Link: https://lore.kernel.org/r/20210513164912.5683-1-bvanassche@acm.org Fixes: 7252a3603015 ("scsi: ufs: Avoid busy-waiting by eliminating tag conflicts") Cc: Can Guo <cang@codeaurora.org> Cc: Alim Akhtar <alim.akhtar@samsung.com> Cc: Avri Altman <avri.altman@wdc.com> Cc: Stanley Chu <stanley.chu@mediatek.com> Cc: Bean Huo <beanhuo@micron.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Can Guo <cang@codeaurora.org> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-26RDMA/rxe: Clear all QP fields if creation failedLeon Romanovsky1-0/+7
[ Upstream commit 67f29896fdc83298eed5a6576ff8f9873f709228 ] rxe_qp_do_cleanup() relies on valid pointer values in QP for the properly created ones, but in case rxe_qp_from_init() failed it was filled with garbage and caused tot the following error. refcount_t: underflow; use-after-free. WARNING: CPU: 1 PID: 12560 at lib/refcount.c:28 refcount_warn_saturate+0x1d1/0x1e0 lib/refcount.c:28 Modules linked in: CPU: 1 PID: 12560 Comm: syz-executor.4 Not tainted 5.12.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:refcount_warn_saturate+0x1d1/0x1e0 lib/refcount.c:28 Code: e9 db fe ff ff 48 89 df e8 2c c2 ea fd e9 8a fe ff ff e8 72 6a a7 fd 48 c7 c7 e0 b2 c1 89 c6 05 dc 3a e6 09 01 e8 ee 74 fb 04 <0f> 0b e9 af fe ff ff 0f 1f 84 00 00 00 00 00 41 56 41 55 41 54 55 RSP: 0018:ffffc900097ceba8 EFLAGS: 00010286 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000040000 RSI: ffffffff815bb075 RDI: fffff520012f9d67 RBP: 0000000000000003 R08: 0000000000000000 R09: 0000000000000000 R10: ffffffff815b4eae R11: 0000000000000000 R12: ffff8880322a4800 R13: ffff8880322a4940 R14: ffff888033044e00 R15: 0000000000000000 FS: 00007f6eb2be3700(0000) GS:ffff8880b9d00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fdbe5d41000 CR3: 000000001d181000 CR4: 00000000001506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: __refcount_sub_and_test include/linux/refcount.h:283 [inline] __refcount_dec_and_test include/linux/refcount.h:315 [inline] refcount_dec_and_test include/linux/refcount.h:333 [inline] kref_put include/linux/kref.h:64 [inline] rxe_qp_do_cleanup+0x96f/0xaf0 drivers/infiniband/sw/rxe/rxe_qp.c:805 execute_in_process_context+0x37/0x150 kernel/workqueue.c:3327 rxe_elem_release+0x9f/0x180 drivers/infiniband/sw/rxe/rxe_pool.c:391 kref_put include/linux/kref.h:65 [inline] rxe_create_qp+0x2cd/0x310 drivers/infiniband/sw/rxe/rxe_verbs.c:425 _ib_create_qp drivers/infiniband/core/core_priv.h:331 [inline] ib_create_named_qp+0x2ad/0x1370 drivers/infiniband/core/verbs.c:1231 ib_create_qp include/rdma/ib_verbs.h:3644 [inline] create_mad_qp+0x177/0x2d0 drivers/infiniband/core/mad.c:2920 ib_mad_port_open drivers/infiniband/core/mad.c:3001 [inline] ib_mad_init_device+0xd6f/0x1400 drivers/infiniband/core/mad.c:3092 add_client_context+0x405/0x5e0 drivers/infiniband/core/device.c:717 enable_device_and_get+0x1cd/0x3b0 drivers/infiniband/core/device.c:1331 ib_register_device drivers/infiniband/core/device.c:1413 [inline] ib_register_device+0x7c7/0xa50 drivers/infiniband/core/device.c:1365 rxe_register_device+0x3d5/0x4a0 drivers/infiniband/sw/rxe/rxe_verbs.c:1147 rxe_add+0x12fe/0x16d0 drivers/infiniband/sw/rxe/rxe.c:247 rxe_net_add+0x8c/0xe0 drivers/infiniband/sw/rxe/rxe_net.c:503 rxe_newlink drivers/infiniband/sw/rxe/rxe.c:269 [inline] rxe_newlink+0xb7/0xe0 drivers/infiniband/sw/rxe/rxe.c:250 nldev_newlink+0x30e/0x550 drivers/infiniband/core/nldev.c:1555 rdma_nl_rcv_msg+0x36d/0x690 drivers/infiniband/core/netlink.c:195 rdma_nl_rcv_skb drivers/infiniband/core/netlink.c:239 [inline] rdma_nl_rcv+0x2ee/0x430 drivers/infiniband/core/netlink.c:259 netlink_unicast_kernel net/netlink/af_netlink.c:1312 [inline] netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1338 netlink_sendmsg+0x856/0xd90 net/netlink/af_netlink.c:1927 sock_sendmsg_nosec net/socket.c:654 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:674 ____sys_sendmsg+0x6e8/0x810 net/socket.c:2350 ___sys_sendmsg+0xf3/0x170 net/socket.c:2404 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2433 do_syscall_64+0x3a/0xb0 arch/x86/entry/common.c:47 entry_SYSCALL_64_after_hwframe+0x44/0xae Fixes: 8700e3e7c485 ("Soft RoCE driver") Link: https://lore.kernel.org/r/7bf8d548764d406dbbbaf4b574960ebfd5af8387.1620717918.git.leonro@nvidia.com Reported-by: syzbot+36a7f280de4e11c6f04e@syzkaller.appspotmail.com Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Zhu Yanjun <zyjzyj2000@gmail.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-26RDMA/core: Prevent divide-by-zero error triggered by the userLeon Romanovsky1-0/+3
[ Upstream commit 54d87913f147a983589923c7f651f97de9af5be1 ] The user_entry_size is supplied by the user and later used as a denominator to calculate number of entries. The zero supplied by the user will trigger the following divide-by-zero error: divide error: 0000 [#1] SMP KASAN PTI CPU: 4 PID: 497 Comm: c_repro Not tainted 5.13.0-rc1+ #281 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:ib_uverbs_handler_UVERBS_METHOD_QUERY_GID_TABLE+0x1b1/0x510 Code: 87 59 03 00 00 e8 9f ab 1e ff 48 8d bd a8 00 00 00 e8 d3 70 41 ff 44 0f b7 b5 a8 00 00 00 e8 86 ab 1e ff 31 d2 4c 89 f0 31 ff <49> f7 f5 48 89 d6 48 89 54 24 10 48 89 04 24 e8 1b ad 1e ff 48 8b RSP: 0018:ffff88810416f828 EFLAGS: 00010246 RAX: 0000000000000008 RBX: 1ffff1102082df09 RCX: ffffffff82183f3d RDX: 0000000000000000 RSI: ffff888105f2da00 RDI: 0000000000000000 RBP: ffff88810416fa98 R08: 0000000000000001 R09: ffffed102082df5f R10: ffff88810416faf7 R11: ffffed102082df5e R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000008 R15: ffff88810416faf0 FS: 00007f5715efa740(0000) GS:ffff88811a700000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000840 CR3: 000000010c2e0001 CR4: 0000000000370ea0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ? ib_uverbs_handler_UVERBS_METHOD_INFO_HANDLES+0x4b0/0x4b0 ib_uverbs_cmd_verbs+0x1546/0x1940 ib_uverbs_ioctl+0x186/0x240 __x64_sys_ioctl+0x38a/0x1220 do_syscall_64+0x3f/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae Fixes: 9f85cbe50aa0 ("RDMA/uverbs: Expose the new GID query API to user space") Link: https://lore.kernel.org/r/b971cc70a8b240a8b5eda33c99fa0558a0071be2.1620657876.git.leonro@nvidia.com Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-26RDMA/siw: Release xarray entryLeon Romanovsky1-1/+1
[ Upstream commit a3d83276d98886879b5bf7b30b7c29882754e4df ] The xarray entry is allocated in siw_qp_add(), but release was missed in case zero-sized SQ was discovered. Fixes: 661f385961f0 ("RDMA/siw: Fix handling of zero-sized Read and Receive Queues.") Link: https://lore.kernel.org/r/f070b59d5a1114d5a4e830346755c2b3f141cde5.1620560472.git.leonro@nvidia.com Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Bernard Metzler <bmt@zurich.ibm.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-26RDMA/siw: Properly check send and receive CQ pointersLeon Romanovsky1-6/+3
[ Upstream commit a568814a55a0e82bbc7c7b51333d0c38e8fb5520 ] The check for the NULL of pointer received from container_of() is incorrect by definition as it points to some offset from NULL. Change such check with proper NULL check of SIW QP attributes. Fixes: 303ae1cdfdf7 ("rdma/siw: application interface") Link: https://lore.kernel.org/r/a7535a82925f6f4c1f062abaa294f3ae6e54bdd2.1620560310.git.leonro@nvidia.com Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Bernard Metzler <bmt@zurich.ibm.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-26tee: amdtee: unload TA only when its refcount becomes 0Rijo Thomas3-16/+106
[ Upstream commit 9f015b3765bf593b3ed5d3b588e409dc0ffa9f85 ] Same Trusted Application (TA) can be loaded in multiple TEE contexts. If it is a single instance TA, the TA should not get unloaded from AMD Secure Processor, while it is still in use in another TEE context. Therefore reference count TA and unload it when the count becomes zero. Fixes: 757cc3e9ff1d ("tee: add AMD-TEE driver") Reviewed-by: Devaraj Rangasamy <Devaraj.Rangasamy@amd.com> Signed-off-by: Rijo Thomas <Rijo-john.Thomas@amd.com> Acked-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-26firmware: arm_scpi: Prevent the ternary sign expansion bugDan Carpenter1-1/+3
[ Upstream commit d9cd78edb2e6b7e26747c0ec312be31e7ef196fe ] How the type promotion works in ternary expressions is a bit tricky. The problem is that scpi_clk_get_val() returns longs, "ret" is a int which holds a negative error code, and le32_to_cpu() is an unsigned int. We want the negative error code to be cast to a negative long. But because le32_to_cpu() is an u32 then "ret" is type promoted to u32 and becomes a high positive and then it is promoted to long and it is still a high positive value. Fix this by getting rid of the ternary. Link: https://lore.kernel.org/r/YIE7pdqV/h10tEAK@mwanda Fixes: 8cb7cf56c9fe ("firmware: add support for ARM System Control and Power Interface(SCPI) protocol") Reviewed-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> [sudeep.holla: changed to return 0 as clock rate on error] Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-22net: stmmac: Do not enable RX FIFO overflow interruptsYannick Vignon2-18/+3
[ Upstream commit 8a7cb245cf28cb3e541e0d6c8624b95d079e155b ] The RX FIFO overflows when the system is not able to process all received packets and they start accumulating (first in the DMA queue in memory, then in the FIFO). An interrupt is then raised for each overflowing packet and handled in stmmac_interrupt(). This is counter-productive, since it brings the system (or more likely, one CPU core) to its knees to process the FIFO overflow interrupts. stmmac_interrupt() handles overflow interrupts by writing the rx tail ptr into the corresponding hardware register (according to the MAC spec, this has the effect of restarting the MAC DMA). However, without freeing any rx descriptors, the DMA stops right away, and another overflow interrupt is raised as the FIFO overflows again. Since the DMA is already restarted at the end of stmmac_rx_refill() after freeing descriptors, disabling FIFO overflow interrupts and the corresponding handling code has no side effect, and eliminates the interrupt storm when the RX FIFO overflows. Signed-off-by: Yannick Vignon <yannick.vignon@nxp.com> Link: https://lore.kernel.org/r/20210506143312.20784-1-yannick.vignon@oss.nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-22net:CXGB4: fix leak if sk_buff is not usedÍñigo Huguet1-7/+9
[ Upstream commit 52bfcdd87e83d9e69d22da5f26b1512ffc81deed ] An sk_buff is allocated to send a flow control message, but it's not sent in all cases: in case the state is not appropiate to send it or if it can't be enqueued. In the first of these 2 cases, the sk_buff was discarded but not freed, producing a memory leak. Signed-off-by: Íñigo Huguet <ihuguet@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-22gpiolib: acpi: Add quirk to ignore EC wakeups on Dell Venue 10 Pro 5055Hans de Goede1-0/+14
[ Upstream commit da91ece226729c76f60708efc275ebd4716ad089 ] Like some other Bay and Cherry Trail SoC based devices the Dell Venue 10 Pro 5055 has an embedded-controller which uses ACPI GPIO events to report events instead of using the standard ACPI EC interface for this. The EC interrupt is only used to report battery-level changes and it keeps doing this while the system is suspended, causing the system to not stay suspended. Add an ignore-wake quirk for the GPIO pin used by the EC to fix the spurious wakeups from suspend. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-22drm/amd/display: Fix two cursor duplication when using overlayRodrigo Siqueira1-0/+51
[ Upstream commit 16e9b3e58bc3fce7391539e0eb3fd167cbf9951f ] Our driver supports overlay planes, and as expected, some userspace compositor takes advantage of these features. If the userspace is not enabling the cursor, they can use multiple planes as they please. Nevertheless, we start to have constraints when userspace tries to enable hardware cursor with various planes. Basically, we cannot draw the cursor at the same size and position on two separated pipes since it uses extra bandwidth and DML only run with one cursor. For those reasons, when we enable hardware cursor and multiple planes, our driver should accept variations like the ones described below: +-------------+ +--------------+ | +---------+ | | | | |Primary | | | Primary | | | | | | Overlay | | +---------+ | | | |Overlay | | | +-------------+ +--------------+ In this scenario, we can have the desktop UI in the overlay and some other framebuffer attached to the primary plane (e.g., video). However, userspace needs to obey some rules and avoid scenarios like the ones described below (when enabling hw cursor): +--------+ |Overlay | +-------------+ +-----+-------+ +-| |--+ | +--------+ | +--------+ | | +--------+ | | |Overlay | | |Overlay | | | | | | | | | | | | | | +--------+ | +--------+ | | | | Primary | | Primary | | Primary | +-------------+ +-------------+ +-------------+ +-------------+ +-------------+ | +--------+ | Primary | | |Overlay | | | | | | | | | +--------+ | +--------+ | | Primary | | |Overlay | | +-------------+ +-| |--+ +--------+ If the userspace violates some of the above scenarios, our driver needs to reject the commit; otherwise, we can have unexpected behavior. Since we don't have a proper driver validation for the above case, we can see some problems like a duplicate cursor in applications that use multiple planes. This commit fixes the cursor issue and others by adding adequate verification for multiple planes. Change since V1 (Harry and Sean): - Remove cursor verification from the equation. Cc: Louis Li <Ching-shih.Li@amd.com> Cc: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Cc: Harry Wentland <Harry.Wentland@amd.com> Cc: Hersen Wu <hersenxs.wu@amd.com> Cc: Sean Paul <seanpaul@chromium.org> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-22nvmet: remove unsupported command noiseKeith Busch1-3/+3
[ Upstream commit 4a20342572f66c5b20a1ee680f5ac0a13703748f ] Nothing can stop a host from submitting invalid commands. The target just needs to respond with an appropriate status, but that's not a target error. Demote invalid command messages to the debug level so these events don't spam the kernel logs. Reported-by: Yi Zhang <yi.zhang@redhat.com> Signed-off-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Klaus Jensen <k.jensen@samsung.com> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-22amdgpu/pm: Prevent force of DCEFCLK on NAVI10 and SIENNA_CICHLIDDarren Powell2-2/+7
[ Upstream commit b117b3964f38a988cb79825950dbd607c02237f3 ] Writing to dcefclk causes the gpu to become unresponsive, and requires a reboot. Patch ignores a .force_clk_levels(SMU_DCEFCLK) call and issues an info message. Signed-off-by: Darren Powell <darren.powell@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-22scsi: target: tcmu: Return from tcmu_handle_completions() if cmd_id not foundBodo Stroesser1-2/+2
[ Upstream commit 9814b55cde0588b6d9bc496cee43f87316cbc6f1 ] If tcmu_handle_completions() finds an invalid cmd_id while looping over cmd responses from userspace it sets TCMU_DEV_BIT_BROKEN and breaks the loop. This means that it does further handling for the tcmu device. Skip that handling by replacing 'break' with 'return'. Additionally change tcmu_handle_completions() from unsigned int to bool, since the value used in return already is bool. Link: https://lore.kernel.org/r/20210423150123.24468-1-bostroesser@gmail.com Signed-off-by: Bodo Stroesser <bostroesser@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-22scsi: lpfc: Fix illegal memory access on Abort IOCBsJames Smart1-2/+9
[ Upstream commit e1364711359f3ced054bda9920477c8bf93b74c5 ] In devloss timer handler and in backend calls to terminate remote port I/O, there is logic to walk through all active IOCBs and validate them to potentially trigger an abort request. This logic is causing illegal memory accesses which leads to a crash. Abort IOCBs, which may be on the list, do not have an associated lpfc_io_buf struct. The driver is trying to map an lpfc_io_buf struct on the IOCB and which results in a bogus address thus the issue. Fix by skipping over ABORT IOCBs (CLOSE IOCBs are ABORTS that don't send ABTS) in the IOCB scan logic. Link: https://lore.kernel.org/r/20210421234433.102079-1-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-22platform/chrome: cros_ec_typec: Add DP mode checkPrashant Malani1-0/+5
[ Upstream commit c5bb32f57bf3a30ed03be51f7be0840325ba8b4a ] There are certain transitional situations where the dp_mode field in the PD_CONTROL response might not be populated with the right DP pin assignment value yet. Add a check for that to avoid sending an invalid value to the Type C mode switch. Signed-off-by: Prashant Malani <pmalani@chromium.org> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Link: https://lore.kernel.org/r/20210421042108.2002-1-pmalani@chromium.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-22Input: silead - add workaround for x86 BIOS-es which bring the chip up in a ↵Hans de Goede1-4/+40
stuck state [ Upstream commit e479187748a8f151a85116a7091c599b121fdea5 ] Some buggy BIOS-es bring up the touchscreen-controller in a stuck state where it blocks the I2C bus. Specifically this happens on the Jumper EZpad 7 tablet model. After much poking at this problem I have found that the following steps are necessary to unstuck the chip / bus: 1. Turn off the Silead chip. 2. Try to do an I2C transfer with the chip, this will fail in response to which the I2C-bus-driver will call: i2c_recover_bus() which will unstuck the I2C-bus. Note the unstuck-ing of the I2C bus only works if we first drop the chip of the bus by turning it off. 3. Turn the chip back on. On the x86/ACPI systems were this problem is seen, step 1. and 3. require making ACPI calls and dealing with ACPI Power Resources. This commit adds a workaround which runtime-suspends the chip to turn it off, leaving it up to the ACPI subsystem to deal with all the ACPI specific details. There is no good way to detect this bug, so the workaround gets activated by a new "silead,stuck-controller-bug" boolean device-property. Since this is only used on x86/ACPI, this will be set by model specific device-props set by drivers/platform/x86/touchscreen_dmi.c. Therefor this new device-property is not documented in the DT-bindings. Dmesg will contain the following messages on systems where the workaround is activated: [ 54.309029] silead_ts i2c-MSSL1680:00: [Firmware Bug]: Stuck I2C bus: please ignore the next 'controller timed out' error [ 55.373593] i2c_designware 808622C1:04: controller timed out [ 55.582186] silead_ts i2c-MSSL1680:00: Silead chip ID: 0x80360000 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20210405202745.16777-1-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-22Input: elants_i2c - do not bind to i2c-hid compatible ACPI instantiated devicesHans de Goede1-2/+42
[ Upstream commit 65299e8bfb24774e6340e93ae49f6626598917c8 ] Several users have been reporting that elants_i2c gives several errors during probe and that their touchscreen does not work on their Lenovo AMD based laptops with a touchscreen with a ELAN0001 ACPI hardware-id: [ 0.550596] elants_i2c i2c-ELAN0001:00: i2c-ELAN0001:00 supply vcc33 not found, using dummy regulator [ 0.551836] elants_i2c i2c-ELAN0001:00: i2c-ELAN0001:00 supply vccio not found, using dummy regulator [ 0.560932] elants_i2c i2c-ELAN0001:00: elants_i2c_send failed (77 77 77 77): -121 [ 0.562427] elants_i2c i2c-ELAN0001:00: software reset failed: -121 [ 0.595925] elants_i2c i2c-ELAN0001:00: elants_i2c_send failed (77 77 77 77): -121 [ 0.597974] elants_i2c i2c-ELAN0001:00: software reset failed: -121 [ 0.621893] elants_i2c i2c-ELAN0001:00: elants_i2c_send failed (77 77 77 77): -121 [ 0.622504] elants_i2c i2c-ELAN0001:00: software reset failed: -121 [ 0.632650] elants_i2c i2c-ELAN0001:00: elants_i2c_send failed (4d 61 69 6e): -121 [ 0.634256] elants_i2c i2c-ELAN0001:00: boot failed: -121 [ 0.699212] elants_i2c i2c-ELAN0001:00: invalid 'hello' packet: 00 00 ff ff [ 1.630506] elants_i2c i2c-ELAN0001:00: Failed to read fw id: -121 [ 1.645508] elants_i2c i2c-ELAN0001:00: unknown packet 00 00 ff ff Despite these errors, the elants_i2c driver stays bound to the device (it returns 0 from its probe method despite the errors), blocking the i2c-hid driver from binding. Manually unbinding the elants_i2c driver and binding the i2c-hid driver makes the touchscreen work. Check if the ACPI-fwnode for the touchscreen contains one of the i2c-hid compatiblity-id strings and if it has the I2C-HID spec's DSM to get the HID descriptor address, If it has both then make elants_i2c not bind, so that the i2c-hid driver can bind. This assumes that non of the (older) elan touchscreens which actually need the elants_i2c driver falsely advertise an i2c-hid compatiblity-id + DSM in their ACPI-fwnodes. If some of them actually do have this false advertising, then this change may lead to regressions. While at it also drop the unnecessary DEVICE_NAME prefixing of the "I2C check functionality error", dev_err already outputs the driver-name. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207759 Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20210405202756.16830-1-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-22PCI: tegra: Fix runtime PM imbalance in pex_ep_event_pex_rst_deassert()Dinghao Liu1-1/+1
[ Upstream commit 5859c926d1f052ee61b5815b14658875c14f6243 ] pm_runtime_get_sync() will increase the runtime PM counter even it returns an error. Thus a pairing decrement is needed to prevent refcount leak. Fix this by replacing this API with pm_runtime_resume_and_get(), which will not change the runtime PM counter on error. Link: https://lore.kernel.org/r/20210408072700.15791-1-dinghao.liu@zju.edu.cn Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-22ACPI / hotplug / PCI: Fix reference count leak in enable_slot()Feilong Lin1-0/+1
[ Upstream commit 3bbfd319034ddce59e023837a4aa11439460509b ] In enable_slot(), if pci_get_slot() returns NULL, we clear the SLOT_ENABLED flag. When pci_get_slot() finds a device, it increments the device's reference count. In this case, we did not call pci_dev_put() to decrement the reference count, so the memory of the device (struct pci_dev type) will eventually leak. Call pci_dev_put() to decrement its reference count when pci_get_slot() returns a PCI device. Link: https://lore.kernel.org/r/b411af88-5049-a1c6-83ac-d104a1f429be@huawei.com Signed-off-by: Feilong Lin <linfeilong@huawei.com> Signed-off-by: Zhiqiang Liu <liuzhiqiang26@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-22dmaengine: dw-edma: Fix crash on loading/unloading driverGustavo Pimentel1-6/+5
[ Upstream commit e970dcc4bd8e0a1376e794fc81d41d0fc98262dd ] When the driver is compiled as a module and loaded if we try to unload it, the Kernel shows a crash log. This Kernel crash is due to the dma_async_device_unregister() call done after deleting the channels, this patch fixes this issue. Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Link: https://lore.kernel.org/r/4aa850c035cf7ee488f1d3fb6dee0e37be0dce0a.1613674948.git.gustavo.pimentel@synopsys.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-22PCI: thunder: Fix compile testingArnd Bergmann3-7/+14
[ Upstream commit 16f7ae5906dfbeff54f74ec75d0563bb3a87ab0b ] Compile-testing these drivers is currently broken. Enabling it causes a couple of build failures though: drivers/pci/controller/pci-thunder-ecam.c:119:30: error: shift count >= width of type [-Werror,-Wshift-count-overflow] drivers/pci/controller/pci-thunder-pem.c:54:2: error: implicit declaration of function 'writeq' [-Werror,-Wimplicit-function-declaration] drivers/pci/controller/pci-thunder-pem.c:392:8: error: implicit declaration of function 'acpi_get_rc_resources' [-Werror,-Wimplicit-function-declaration] Fix them with the obvious one-line changes. Link: https://lore.kernel.org/r/20210308152501.2135937-2-arnd@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Reviewed-by: Robert Richter <rric@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-22virtio_net: Do not pull payload in skb->headEric Dumazet1-3/+7
[ Upstream commit 0f6925b3e8da0dbbb52447ca8a8b42b371aac7db ] Xuan Zhuo reported that commit 3226b158e67c ("net: avoid 32 x truesize under-estimation for tiny skbs") brought a ~10% performance drop. The reason for the performance drop was that GRO was forced to chain sk_buff (using skb_shinfo(skb)->frag_list), which uses more memory but also cause packet consumers to go over a lot of overhead handling all the tiny skbs. It turns out that virtio_net page_to_skb() has a wrong strategy : It allocates skbs with GOOD_COPY_LEN (128) bytes in skb->head, then copies 128 bytes from the page, before feeding the packet to GRO stack. This was suboptimal before commit 3226b158e67c ("net: avoid 32 x truesize under-estimation for tiny skbs") because GRO was using 2 frags per MSS, meaning we were not packing MSS with 100% efficiency. Fix is to pull only the ethernet header in page_to_skb() Then, we change virtio_net_hdr_to_skb() to pull the missing headers, instead of assuming they were already pulled by callers. This fixes the performance regression, but could also allow virtio_net to accept packets with more than 128bytes of headers. Many thanks to Xuan Zhuo for his report, and his tests/help. Fixes: 3226b158e67c ("net: avoid 32 x truesize under-estimation for tiny skbs") Reported-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Link: https://www.spinics.net/lists/netdev/msg731397.html Co-Developed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: virtualization@lists.linux-foundation.org Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-22isdn: capi: fix mismatched prototypesArnd Bergmann1-2/+2
commit 5ee7d4c7fbc9d3119a20b1c77d34003d1f82ac26 upstream. gcc-11 complains about a prototype declaration that is different from the function definition: drivers/isdn/capi/kcapi.c:724:44: error: argument 2 of type ‘u8 *’ {aka ‘unsigned char *’} declared as a pointer [-Werror=array-parameter=] 724 | u16 capi20_get_manufacturer(u32 contr, u8 *buf) | ~~~~^~~ In file included from drivers/isdn/capi/kcapi.c:13: drivers/isdn/capi/kcapi.h:62:43: note: previously declared as an array ‘u8[64]’ {aka ‘unsigned char[64]’} 62 | u16 capi20_get_manufacturer(u32 contr, u8 buf[CAPI_MANUFACTURER_LEN]); | ~~~^~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/isdn/capi/kcapi.c:790:38: error: argument 2 of type ‘u8 *’ {aka ‘unsigned char *’} declared as a pointer [-Werror=array-parameter=] 790 | u16 capi20_get_serial(u32 contr, u8 *serial) | ~~~~^~~~~~ In file included from drivers/isdn/capi/kcapi.c:13: drivers/isdn/capi/kcapi.h:64:37: note: previously declared as an array ‘u8[8]’ {aka ‘unsigned char[8]’} 64 | u16 capi20_get_serial(u32 contr, u8 serial[CAPI_SERIAL_LEN]); | ~~~^~~~~~~~~~~~~~~~~~~~~~~ Change the definition to make them match. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-22cxgb4: Fix the -Wmisleading-indentation warningKaixu Xia1-1/+1
commit ea8146c6845799142aa4ee2660741c215e340cdf upstream. Fix the gcc warning: drivers/net/ethernet/chelsio/cxgb4/cxgb4_debugfs.c:2673:9: warning: this 'for' clause does not guard... [-Wmisleading-indentation] 2673 | for (i = 0; i < n; ++i) \ Reported-by: Tosk Robot <tencent_os_robot@tencent.com> Signed-off-by: Kaixu Xia <kaixuxia@tencent.com> Link: https://lore.kernel.org/r/1604467444-23043-1-git-send-email-kaixuxia@tencent.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-22usb: sl811-hcd: improve misleading indentationArnd Bergmann1-5/+4
commit 8460f6003a1d2633737b89c4f69d6f4c0c7c65a3 upstream. gcc-11 now warns about a confusingly indented code block: drivers/usb/host/sl811-hcd.c: In function ‘sl811h_hub_control’: drivers/usb/host/sl811-hcd.c:1291:9: error: this ‘if’ clause does not guard... [-Werror=misleading-indentation] 1291 | if (*(u16*)(buf+2)) /* only if wPortChange is interesting */ | ^~ drivers/usb/host/sl811-hcd.c:1295:17: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘if’ 1295 | break; Rewrite this to use a single if() block with the __is_defined() macro. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20210322164244.827589-1-arnd@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-22kgdb: fix gcc-11 warning on indentationArnd Bergmann1-13/+13
commit 40cc3a80bb42587db1e6ae21d6f3090582d33e89 upstream. gcc-11 starts warning about misleading indentation inside of macros: drivers/misc/kgdbts.c: In function ‘kgdbts_break_test’: drivers/misc/kgdbts.c:103:9: error: this ‘if’ clause does not guard... [-Werror=misleading-indentation] 103 | if (verbose > 1) \ | ^~ drivers/misc/kgdbts.c:200:9: note: in expansion of macro ‘v2printk’ 200 | v2printk("kgdbts: breakpoint complete\n"); | ^~~~~~~~ drivers/misc/kgdbts.c:105:17: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘if’ 105 | touch_nmi_watchdog(); \ | ^~~~~~~~~~~~~~~~~~ The code looks correct to me, so just reindent it for readability. Fixes: e8d31c204e36 ("kgdb: add kgdb internal test suite") Acked-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20210322164308.827846-1-arnd@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-22airo: work around stack usage warningArnd Bergmann1-52/+65
commit 7909a590eba6d021f104958857cbc4f0089daceb upstream. gcc-11 with KASAN on 32-bit arm produces a warning about a function that needs a lot of stack space: drivers/net/wireless/cisco/airo.c: In function 'setup_card.constprop': drivers/net/wireless/cisco/airo.c:3960:1: error: the frame size of 1512 bytes is larger than 1400 bytes [-Werror=frame-larger-than=] Most of this is from a single large structure that could be dynamically allocated or moved into the per-device structure. However, as the callers all seem to have a fairly well bounded call chain, the easiest change is to pull out the part of the function that needs the large variables into a separate function and mark that as noinline_for_stack. This does not reduce the total stack usage, but it gets rid of the warning and requires minimal changes otherwise. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210323131634.2669455-1-arnd@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-22drm/i915/display: fix compiler warning about array overrunLinus Torvalds1-1/+12
commit fec4d42724a1bf3dcba52307e55375fdb967b852 upstream. intel_dp_check_mst_status() uses a 14-byte array to read the DPRX Event Status Indicator data, but then passes that buffer at offset 10 off as an argument to drm_dp_channel_eq_ok(). End result: there are only 4 bytes remaining of t