summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2021-08-12scsi: sr: Return correct event when media event code is 3Li Manyi1-1/+1
[ Upstream commit 5c04243a56a7977185b00400e59ca7e108004faf ] Media event code 3 is defined in the MMC-6 spec as follows: "MediaRemoval: The media has been removed from the specified slot, and the Drive is unable to access the media without user intervention. This applies to media changers only." This indicated that treating the condition as an EJECT_REQUEST was appropriate. However, doing so had the unfortunate side-effect of causing the drive tray to be physically ejected on resume. Instead treat the event as a MEDIA_CHANGE request. Fixes: 7dd753ca59d6 ("scsi: sr: Return appropriate error code when disk is ejected") Link: https://bugzilla.kernel.org/show_bug.cgi?id=213759 Link: https://lore.kernel.org/r/20210726114913.6760-1-limanyi@uniontech.com Signed-off-by: Li Manyi <limanyi@uniontech.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-12spi: imx: mx51-ecspi: Fix low-speed CONFIGREG delay calculationMarek Vasut1-1/+15
[ Upstream commit 53ca18acbe645656132fb5a329833db711067e54 ] The spi_imx->spi_bus_clk may be uninitialized and thus also zero in mx51_ecspi_prepare_message(), which would lead to division by zero in kernel. Since bitbang .setup_transfer callback which initializes the spi_imx->spi_bus_clk is called after bitbang prepare_message callback, iterate over all the transfers in spi_message, find the one with lowest bus frequency, and use that bus frequency for the delay calculation. Note that it is not possible to move this CONFIGREG delay back into the .setup_transfer callback, because that is invoked too late, after the GPIO chipselects were already configured. Fixes: 135cbd378eab ("spi: imx: mx51-ecspi: Reinstate low-speed CONFIGREG delay") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20210726100102.5188-1-marex@denx.de Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-12spi: imx: mx51-ecspi: Reinstate low-speed CONFIGREG delayMarek Vasut1-19/+19
[ Upstream commit 135cbd378eab336da15de9c84bbb22bf743b38a5 ] Since 00b80ac935539 ("spi: imx: mx51-ecspi: Move some initialisation to prepare_message hook."), the MX51_ECSPI_CONFIG write no longer happens in prepare_transfer hook, but rather in prepare_message hook, however the MX51_ECSPI_CONFIG delay is still left in prepare_transfer hook and thus has no effect. This leads to low bus frequency operation problems described in 6fd8b8503a0dc ("spi: spi-imx: Fix out-of-order CS/SCLK operation at low speeds") again. Move the MX51_ECSPI_CONFIG write delay into the prepare_message hook as well, thus reinstating the low bus frequency fix. Fixes: 00b80ac935539 ("spi: imx: mx51-ecspi: Move some initialisation to prepare_message hook.") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20210703022300.296114-1-marex@denx.de Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-12dmaengine: stm32-dmamux: Fix PM usage counter unbalance in stm32 dmamux opsZhang Qilong1-3/+3
[ Upstream commit baa16371c9525f24d508508e4d296c031e1de29c ] pm_runtime_get_sync will increment pm usage counter even it failed. Forgetting to putting operation will result in reference leak here. We fix it by replacing it with pm_runtime_resume_and_get to keep usage counter balanced. Fixes: 4f3ceca254e0f ("dmaengine: stm32-dmamux: Add PM Runtime support") Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com> Link: https://lore.kernel.org/r/20210607064640.121394-3-zhangqilong3@huawei.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-12dmaengine: stm32-dma: Fix PM usage counter imbalance in stm32 dma opsZhang Qilong1-2/+2
[ Upstream commit d54db74ad6e0dea8c253fb68c689b836657ab914 ] pm_runtime_get_sync will increment pm usage counter even it failed. Forgetting to putting operation will result in reference leak here. We fix it by replacing it with pm_runtime_resume_and_get to keep usage counter balanced. Fixes: 48bc73ba14bcd ("dmaengine: stm32-dma: Add PM Runtime support") Fixes: 05f8740a0e6fc ("dmaengine: stm32-dma: add suspend/resume power management support") Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com> Link: https://lore.kernel.org/r/20210607064640.121394-2-zhangqilong3@huawei.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-12clk: tegra: Implement disable_unused() of tegra_clk_sdmmc_mux_opsDmitry Osipenko1-0/+10
[ Upstream commit 2bcc025ab9bbd029b1730cde71cb4e4f0ed35d0f ] Implement disable_unused() callback of tegra_clk_sdmmc_mux_ops to fix imbalanced disabling of the unused MMC clock on Tegra210 Jetson Nano. Fixes: c592c8a28f58 ("clk: tegra: Fix refcounting of gate clocks") Reported-by: Jon Hunter <jonathanh@nvidia.com> # T210 Nano Tested-by: Jon Hunter <jonathanh@nvidia.com> # T210 Nano Acked-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Link: https://lore.kernel.org/r/20210717112742.7196-1-digetx@gmail.com Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-12dmaengine: uniphier-xdmac: Use readl_poll_timeout_atomic() in atomic stateKunihiko Hayashi1-2/+2
[ Upstream commit 55f24c27b6c1a840b62fe297616f1f9ea3576cb7 ] The function uniphier_xdmac_chan_stop() is only called in atomic state. Should use readl_poll_timeout_atomic() there instead of readl_poll_timeout(). Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Fixes: 667b9251440b ("dmaengine: uniphier-xdmac: Add UniPhier external DMA controller driver") Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Link: https://lore.kernel.org/r/1627364852-28432-1-git-send-email-hayashi.kunihiko@socionext.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-12clk: stm32f4: fix post divisor setup for I2S/SAI PLLsDario Binacchi1-5/+5
[ Upstream commit 24b5b1978cd5a80db58e2a19db2f9c36fe8d4f7a ] Enabling the framebuffer leads to a system hang. Running, as a debug hack, the store_pan() function in drivers/video/fbdev/core/fbsysfs.c without taking the console_lock, allows to see the crash backtrace on the serial line. ~ # echo 0 0 > /sys/class/graphics/fb0/pan [ 9.719414] Unhandled exception: IPSR = 00000005 LR = fffffff1 [ 9.726937] CPU: 0 PID: 49 Comm: sh Not tainted 5.13.0-rc5 #9 [ 9.733008] Hardware name: STM32 (Device Tree Support) [ 9.738296] PC is at clk_gate_is_enabled+0x0/0x28 [ 9.743426] LR is at stm32f4_pll_div_set_rate+0xf/0x38 [ 9.748857] pc : [<0011e4be>] lr : [<0011f9e3>] psr: 0100000b [ 9.755373] sp : 00bc7be0 ip : 00000000 fp : 001f3ac4 [ 9.760812] r10: 002610d0 r9 : 01efe920 r8 : 00540560 [ 9.766269] r7 : 02e7ddb0 r6 : 0173eed8 r5 : 00000000 r4 : 004027c0 [ 9.773081] r3 : 0011e4bf r2 : 02e7ddb0 r1 : 0173eed8 r0 : 1d3267b8 [ 9.779911] xPSR: 0100000b [ 9.782719] CPU: 0 PID: 49 Comm: sh Not tainted 5.13.0-rc5 #9 [ 9.788791] Hardware name: STM32 (Device Tree Support) [ 9.794120] [<0000afa1>] (unwind_backtrace) from [<0000a33f>] (show_stack+0xb/0xc) [ 9.802421] [<0000a33f>] (show_stack) from [<0000a8df>] (__invalid_entry+0x4b/0x4c) The `pll_num' field in the post_div_data configuration contained a wrong value which also referenced an uninitialized hardware clock when clk_register_pll_div() was called. Fixes: 517633ef630e ("clk: stm32f4: Add post divisor for I2S & SAI PLLs") Signed-off-by: Dario Binacchi <dariobin@libero.it> Reviewed-by: Gabriel Fernandez <gabriel.fernandez@st.com> Link: https://lore.kernel.org/r/20210725160725.10788-1-dariobin@libero.it Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-12bus: ti-sysc: Fix gpt12 system timer issue with reserved statusTony Lindgren1-7/+13
[ Upstream commit 3ff340e24c9dd5cff9fc07d67914c5adf67f80d6 ] Jarkko Nikula <jarkko.nikula@bitmer.com> reported that Beagleboard revision c2 stopped booting. Jarkko bisected the issue down to commit 6cfcd5563b4f ("clocksource/drivers/timer-ti-dm: Fix suspend and resume for am3 and am4"). Let's fix the issue by tagging system timers as reserved rather than ignoring them. And let's not probe any interconnect target module child devices for reserved modules. This allows PM runtime to keep track of clocks and clockdomains for the interconnect target module, and prevent the system timer from idling as we already have SYSC_QUIRK_NO_IDLE and SYSC_QUIRK_NO_IDLE_ON_INIT flags set for system timers. Fixes: 6cfcd5563b4f ("clocksource/drivers/timer-ti-dm: Fix suspend and resume for am3 and am4") Reported-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Tested-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-12Revert "ACPICA: Fix memory leak caused by _CID repair function"Rafael J. Wysocki1-7/+0
commit 6511a8b5b7a65037340cd8ee91a377811effbc83 upstream. Revert commit c27bac0314131 ("ACPICA: Fix memory leak caused by _CID repair function") which is reported to cause a boot issue on Acer Swift 3 (SF314-51). Reported-by: Adrien Precigout <dev@asdrip.fr> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-08spi: mediatek: Fix fifo transferGuenter Roeck1-14/+5
commit 0d5c3954b35eddff0da0436c31e8d721eceb7dc2 upstream. Commit 3a70dd2d0503 ("spi: mediatek: fix fifo rx mode") claims that fifo RX mode was never handled, and adds the presumably missing code to the FIFO transfer function. However, the claim that receive data was not handled is incorrect. It was handled as part of interrupt handling after the transfer was complete. The code added with the above mentioned commit reads data from the receive FIFO before the transfer is started, which is wrong. This results in an actual transfer error on a Hayato Chromebook. Remove the code trying to handle receive data before the transfer is started to fix the problem. Fixes: 3a70dd2d0503 ("spi: mediatek: fix fifo rx mode") Cc: Peter Hess <peter.hess@ph-home.de> Cc: Frank Wunderlich <frank-w@public-files.de> Cc: Tzung-Bi Shih <tzungbi@google.com> Cc: Hsin-Yi Wang <hsinyi@google.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Hsin-Yi Wang <hsinyi@google.com> Tested-by: Tzung-Bi Shih <tzungbi@google.com> Link: https://lore.kernel.org/r/20210802030023.1748777-1-linux@roeck-us.net Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-08Revert "watchdog: iTCO_wdt: Account for rebooting on second timeout"Greg Kroah-Hartman1-9/+3
This reverts commit 39ed17de8c6ff54c7ed4605a4a8e04a2e2f0b82e which is commit cb011044e34c293e139570ce5c01aed66a34345c upstream. It is reported to cause problems with systems and probably should not have been backported in the first place :( Link: https://lore.kernel.org/r/20210803165108.4154cd52@endymion Reported-by: Jean Delvare <jdelvare@suse.de> Cc: Jan Kiszka <jan.kiszka@siemens.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Wim Van Sebroeck <wim@linux-watchdog.org> Cc: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-08firmware: arm_scmi: Add delayed response status checkCristian Marussi1-2/+6
commit f1748b1ee1fa0fd1a074504045b530b62f949188 upstream. A successfully received delayed response could anyway report a failure at the protocol layer in the message status field. Add a check also for this error condition. Link: https://lore.kernel.org/r/20210608103056.3388-1-cristian.marussi@arm.com Fixes: 58ecdf03dbb9 ("firmware: arm_scmi: Add support for asynchronous commands and delayed response") Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-08firmware: arm_scmi: Ensure drivers provide a probe functionSudeep Holla1-0/+3
commit 5e469dac326555d2038d199a6329458cc82a34e5 upstream. The bus probe callback calls the driver callback without further checking. Better be safe than sorry and refuse registration of a driver without a probe function to prevent a NULL pointer exception. Link: https://lore.kernel.org/r/20210624095059.4010157-2-sudeep.holla@arm.com Fixes: 933c504424a2 ("firmware: arm_scmi: add scmi protocol bus to enumerate protocol devices") Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Tested-by: Cristian Marussi <cristian.marussi@arm.com> Reviewed-by: Cristian Marussi <cristian.marussi@arm.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-08drm/amd/display: Fix max vstartup calculation for modes with bordersNicholas Kazlauskas1-2/+4
[ Upstream commit d7940911fc0754d99b208f0e3098762d39f403a0 ] [Why] Vertical and horizontal borders in timings are treated as increasing the active area - vblank and hblank actually shrink. Our input into DML does not include these borders so it incorrectly assumes it has more time than available for vstartup and tmdl calculations for some modes with borders. An example of such a timing would be 640x480@72Hz: h_total: 832 h_border_left: 8 h_addressable: 640 h_border_right: 8 h_front_porch: 16 h_sync_width: 40 v_total: 520 v_border_top: 8 v_addressable: 480 v_border_bottom: 8 v_front_porch: 1 v_sync_width: 3 pix_clk_100hz: 315000 [How] Include borders as part of destination vactive/hactive. This change DCN20+ so it has wide impact, but the destination vactive and hactive are only really used for vstartup calculation anyway. Most modes do not have vertical or horizontal borders. Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-08drm/amd/display: Fix comparison error in dcn21 DMLVictor Lu1-1/+1
[ Upstream commit ec3102dc6b36c692104c4a0546d4119de59a3bc1 ] [why] A comparison error made it possible to not iterate through all the specified prefetch modes. [how] Correct "<" to "<=" Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Yongqiang Sun <Yongqiang.Sun@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Victor Lu <victorchengchi.lu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-08nvme: fix nvme_setup_command metadata trace eventKeith Busch1-3/+3
[ Upstream commit 234211b8dd161fa25f192c78d5a8d2dd6bf920a0 ] The metadata address is set after the trace event, so the trace is not capturing anything useful. Rather than logging the memory address, it's useful to know if the command carries a metadata payload, so change the trace event to log that true/false state instead. Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-08efi/mokvar: Reserve the table only if it is in boot services dataBorislav Petkov1-1/+4
[ Upstream commit 47e1e233e9d822dfda068383fb9a616451bda703 ] One of the SUSE QA tests triggered: localhost kernel: efi: Failed to lookup EFI memory descriptor for 0x000000003dcf8000 which comes from x86's version of efi_arch_mem_reserve() trying to reserve a memory region. Usually, that function expects EFI_BOOT_SERVICES_DATA memory descriptors but the above case is for the MOKvar table which is allocated in the EFI shim as runtime services. That lead to a fix changing the allocation of that table to boot services. However, that fix broke booting SEV guests with that shim leading to this kernel fix 8d651ee9c71b ("x86/ioremap: Map EFI-reserved memory as encrypted for SEV") which extended the ioremap hint to map reserved EFI boot services as decrypted too. However, all that wasn't needed, IMO, because that error message in efi_arch_mem_reserve() was innocuous in this case - if the MOKvar table is not in boot services, then it doesn't need to be reserved in the first place because it is, well, in runtime services which *should* be reserved anyway. So do that reservation for the MOKvar table only if it is allocated in boot services data. I couldn't find any requirement about where that table should be allocated in, unlike the ESRT which allocation is mandated to be done in boot services data by the UEFI spec. Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-08qed: fix possible unpaired spin_{un}lock_bh in _qed_mcp_cmd_and_union()Jia He1-6/+17
[ Upstream commit 6206b7981a36476f4695d661ae139f7db36a802d ] Liajian reported a bug_on hit on a ThunderX2 arm64 server with FastLinQ QL41000 ethernet controller: BUG: scheduling while atomic: kworker/0:4/531/0x00000200 [qed_probe:488()]hw prepare failed kernel BUG at mm/vmalloc.c:2355! Internal error: Oops - BUG: 0 [#1] SMP CPU: 0 PID: 531 Comm: kworker/0:4 Tainted: G W 5.4.0-77-generic #86-Ubuntu pstate: 00400009 (nzcv daif +PAN -UAO) Call trace: vunmap+0x4c/0x50 iounmap+0x48/0x58 qed_free_pci+0x60/0x80 [qed] qed_probe+0x35c/0x688 [qed] __qede_probe+0x88/0x5c8 [qede] qede_probe+0x60/0xe0 [qede] local_pci_probe+0x48/0xa0 work_for_cpu_fn+0x24/0x38 process_one_work+0x1d0/0x468 worker_thread+0x238/0x4e0 kthread+0xf0/0x118 ret_from_fork+0x10/0x18 In this case, qed_hw_prepare() returns error due to hw/fw error, but in theory work queue should be in process context instead of interrupt. The root cause might be the unpaired spin_{un}lock_bh() in _qed_mcp_cmd_and_union(), which causes botton half is disabled incorrectly. Reported-by: Lijian Zhang <Lijian.Zhang@arm.com> Signed-off-by: Jia He <justin.he@arm.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-08r8152: Fix potential PM refcount imbalanceTakashi Iwai1-1/+2
[ Upstream commit 9c23aa51477a37f8b56c3c40192248db0663c196 ] rtl8152_close() takes the refcount via usb_autopm_get_interface() but it doesn't release when RTL8152_UNPLUG test hits. This may lead to the imbalance of PM refcount. This patch addresses it. Link: https://bugzilla.suse.com/show_bug.cgi?id=1186194 Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-08spi: stm32h7: fix full duplex irq handler handlingAlain Volmat1-6/+9
[ Upstream commit e4a5c19888a5f8a9390860ca493e643be58c8791 ] In case of Full-Duplex mode, DXP flag is set when RXP and TXP flags are set. But to avoid 2 different handlings, just add TXP and RXP flag in the mask instead of DXP, and then keep the initial handling of TXP and RXP events. Also rephrase comment about EOTIE which is one of the interrupt enable bits. It is not triggered by any event. Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com> Signed-off-by: Alain Volmat <alain.volmat@foss.st.com> Reviewed-by: Amelie Delaunay <amelie.delaunay@foss.st.com> Link: https://lore.kernel.org/r/1625042723-661-3-git-send-email-alain.volmat@foss.st.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-08regulator: rtmv20: Fix wrong mask for strobe-polarity-highChiYuan Huang1-1/+1
[ Upstream commit 2b6a761be079f9fa8abf3157b5679a6f38885db4 ] Fix wrong mask for strobe-polarity-high. Signed-off-by: ChiYuan Huang <cy_huang@richtek.com> In-reply-to: <CAFRkauB=0KwrJW19nJTTagdHhBR=V2R8YFWG3R3oVXt=rBRsqw@mail.gmail.com> Reviewed-by: Axel Lin <axel.lin@ingics.com> Link: https://lore.kernel.org/r/1624723112-26653-1-git-send-email-u0084500@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-08Revert "drm/i915: Propagate errors on awaiting already signaled fences"Jason Ekstrand1-6/+2
commit 3761baae908a7b5012be08d70fa553cc2eb82305 upstream. This reverts commit 9e31c1fe45d555a948ff66f1f0e3fe1f83ca63f7. Ever since that commit, we've been having issues where a hang in one client can propagate to another. In particular, a hang in an app can propagate to the X server which causes the whole desktop to lock up. Error propagation along fences sound like a good idea, but as your bug shows, surprising consequences, since propagating errors across security boundaries is not a good thing. What we do have is track the hangs on the ctx, and report information to userspace using RESET_STATS. That's how arb_robustness works. Also, if my understanding is still correct, the EIO from execbuf is when your context is banned (because not recoverable or too many hangs). And in all these cases it's up to userspace to figure out what is all impacted and should be reported to the application, that's not on the kernel to guess and automatically propagate. What's more, we're also building more features on top of ctx error reporting with RESET_STATS ioctl: Encrypted buffers use the same, and the userspace fence wait also relies on that mechanism. So it is the path going forward for reporting gpu hangs and resets to userspace. So all together that's why I think we should just bury this idea again as not quite the direction we want to go to, hence why I think the revert is the right option here. For backporters: Please note that you _must_ have a backport of https://lore.kernel.org/dri-devel/20210602164149.391653-2-jason@jlekstrand.net/ for otherwise backporting just this patch opens up a security bug. v2: Augment commit message. Also restore Jason's sob that I accidentally lost. v3: Add a note for backporters Signed-off-by: Jason Ekstrand <jason@jlekstrand.net> Reported-by: Marcin Slusarz <marcin.slusarz@intel.com> Cc: <stable@vger.kernel.org> # v5.6+ Cc: Jason Ekstrand <jason.ekstrand@intel.com> Cc: Marcin Slusarz <marcin.slusarz@intel.com> Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/3080 Fixes: 9e31c1fe45d5 ("drm/i915: Propagate errors on awaiting already signaled fences") Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Jon Bloomfield <jon.bloomfield@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210714193419.1459723-3-jason@jlekstrand.net (cherry picked from commit 93a2711cddd5760e2f0f901817d71c93183c3b87) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-08drm/i915: Revert "drm/i915/gem: Asynchronous cmdparser"Jason Ekstrand2-167/+25
commit c9d9fdbc108af8915d3f497bbdf3898bf8f321b8 upstream. This reverts 686c7c35abc2 ("drm/i915/gem: Asynchronous cmdparser"). The justification for this commit in the git history was a vague comment about getting it out from under the struct_mutex. While this may improve perf for some workloads on Gen7 platforms where we rely on the command parser for features such as indirect rendering, no numbers were provided to prove such an improvement. It claims to closed two gitlab/bugzilla issues but with no explanation whatsoever as to why or what bug it's fixing. Meanwhile, by moving command parsing off to an async callback, it leaves us with a problem of what to do on error. When things were synchronous, EXECBUFFER2 would fail with an error code if parsing failed. When moving it to async, we needed another way to handle that error and the solution employed was to set an error on the dma_fence and then trust that said error gets propagated to the client eventually. Moving back to synchronous will help us untangle the fence error propagation mess. This also reverts most of 0edbb9ba1bfe ("drm/i915: Move cmd parser pinning to execbuffer") which is a refactor of some of our allocation paths for asynchronous parsing. Now that everything is synchronous, we don't need it. v2 (Daniel Vetter): - Add stabel Cc and Fixes tag Signed-off-by: Jason Ekstrand <jason@jlekstrand.net> Cc: <stable@vger.kernel.org> # v5.6+ Fixes: 9e31c1fe45d5 ("drm/i915: Propagate errors on awaiting already signaled fences") Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Jon Bloomfield <jon.bloomfield@intel.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210714193419.1459723-2-jason@jlekstrand.net Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-04i40e: Add additional info to PHY type errorLukasz Cieplicki1-1/+1
commit dc614c46178b0b89bde86ac54fc687a28580d2b7 upstream. In case of PHY type error occurs, the message was too generic. Add additional info to PHY type error indicating that it can be wrong cable connected. Fixes: 124ed15bf126 ("i40e: Add dual speed module support") Signed-off-by: Lukasz Cieplicki <lukaszx.cieplicki@intel.com> Signed-off-by: Michal Maloszewski <michal.maloszewski@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-04can: hi311x: fix a signedness bug in hi3110_cmd()Dan Carpenter1-1/+1
[ Upstream commit f6b3c7848e66e9046c8a79a5b88fd03461cc252b ] The hi3110_cmd() is supposed to return zero on success and negative error codes on failure, but it was accidentally declared as a u8 when it needs to be an int type. Fixes: 57e83fb9b746 ("can: hi311x: Add Holt HI-311x CAN driver") Link: https://lore.kernel.org/r/20210729141246.GA1267@kili Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-04sis900: Fix missing pci_disable_device() in probe and removeWang Hai1-5/+2
[ Upstream commit 89fb62fde3b226f99b7015280cf132e2a7438edf ] Replace pci_enable_device() with pcim_enable_device(), pci_disable_device() and pci_release_regions() will be called in release automatically. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wang Hai <wanghai38@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-04tulip: windbond-840: Fix missing pci_disable_device() in probe and removeWang Hai1-5/+2
[ Upstream commit 76a16be07b209a3f507c72abe823bd3af1c8661a ] Replace pci_enable_device() with pcim_enable_device(), pci_disable_device() and pci_release_regions() will be called in release automatically. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wang Hai <wanghai38@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-04net/mlx5e: Fix nullptr in mlx5e_hairpin_get_mdev()Dima Chumak1-2/+31
[ Upstream commit b1c2f6312c5005c928a72e668bf305a589d828d4 ] The result of __dev_get_by_index() is not checked for NULL and then gets dereferenced immediately. Also, __dev_get_by_index() must be called while holding either RTNL lock or @dev_base_lock, which isn't satisfied by mlx5e_hairpin_get_mdev() or its callers. This makes the underlying hlist_for_each_entry() loop not safe, and can have adverse effects in itself. Fix by using dev_get_by_index() and handling nullptr return value when ifindex device is not found. Update mlx5e_hairpin_get_mdev() callers to check for possible PTR_ERR() result. Fixes: 77ab67b7f0f9 ("net/mlx5e: Basic setup of hairpin object") Addresses-Coverity: ("Dereference null return value") Signed-off-by: Dima Chumak <dchumak@nvidia.com> Reviewed-by: Vlad Buslov <vladbu@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-04net/mlx5: Fix flow table chainingMaor Gottlieb1-4/+6
[ Upstream commit 8b54874ef1617185048029a3083d510569e93751 ] Fix a bug when flow table is created in priority that already has other flow tables as shown in the below diagram. If the new flow table (FT-B) has the lowest level in the priority, we need to connect the flow tables from the previous priority (p0) to this new table. In addition when this flow table is destroyed (FT-B), we need to connect the flow tables from the previous priority (p0) to the next level flow table (FT-C) in the same priority of the destroyed table (if exists). --------- |root_ns| --------- | -------------------------------- | | | ---------- ---------- --------- |p(prio)-x| | p-y | | p-n | ---------- ---------- --------- | | ---------------- ------------------ |ns(e.g bypass)| |ns(e.g. kernel) | ---------------- ------------------ | | | ------- ------ ---- | p0 | | p1 | |p2| ------- ------ ---- | | \ -------- ------- ------ | FT-A | |FT-B | |FT-C| -------- ------- ------ Fixes: f90edfd279f3 ("net/mlx5_core: Connect flow tables") Signed-off-by: Maor Gottlieb <maorg@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-04drm/msm/dp: Initialize the INTF_CONFIG registerBjorn Andersson1-0/+1
[ Upstream commit f9a39932fa54b6421e751ada7a285da809146421 ] Some bootloaders set the widebus enable bit in the INTF_CONFIG register, but configuration of widebus isn't yet supported ensure that the register has a known value, with widebus disabled. Fixes: c943b4948b58 ("drm/msm/dp: add displayPort driver support") Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20210722024434.3313167-1-bjorn.andersson@linaro.org Signed-off-by: Rob Clark <robdclark@chromium.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-04drm/msm/dpu: Fix sm8250_mdp register lengthRobert Foss1-1/+1
[ Upstream commit b910a0206b59eb90ea8ff76d146f4c3156da61e9 ] The downstream dts lists this value as 0x494, and not 0x45c. Fixes: af776a3e1c30 ("drm/msm/dpu: add SM8250 to hw catalog") Signed-off-by: Robert Foss <robert.foss@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Link: https://lore.kernel.org/r/20210628085033.9905-1-robert.foss@linaro.org Signed-off-by: Rob Clark <robdclark@chromium.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-04mlx4: Fix missing error code in mlx4_load_one()Jiapeng Chong1-0/+1
[ Upstream commit 7e4960b3d66d7248b23de3251118147812b42da2 ] The error code is missing in this code scenario, add the error code '-EINVAL' to the return value 'err'. Eliminate the follow smatch warning: drivers/net/ethernet/mellanox/mlx4/main.c:3538 mlx4_load_one() warn: missing error code 'err'. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Fixes: 7ae0e400cd93 ("net/mlx4_core: Flexible (asymmetric) allocation of EQs and MSI-X vectors for PF/VFs") Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-04octeontx2-pf: Fix interface down flag on errorGeetha sowjanya2-4/+8
[ Upstream commit 69f0aeb13bb548e2d5710a350116e03f0273302e ] In the existing code while changing the number of TX/RX queues using ethtool the PF/VF interface resources are freed and reallocated (otx2_stop and otx2_open is called) if the device is in running state. If any resource allocation fails in otx2_open, driver free already allocated resources and return. But again, when the number of queues changes as the device state still running oxt2_stop is called. In which we try to free already freed resources leading to driver crash. This patch fixes the issue by setting the INTF_DOWN flag on error and free the resources in otx2_stop only if the flag is not set. Fixes: 50fe6c02e5ad ("octeontx2-pf: Register and handle link notifications") Signed-off-by: Geetha sowjanya <gakula@marvell.com> Signed-off-by: Sunil Kovvuri Goutham <Sunil.Goutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-04ionic: count csum_none when offload enabledShannon Nelson1-6/+5
[ Upstream commit f07f9815b7046e25cc32bf8542c9c0bbc5eb6e0e ] Be sure to count the csum_none cases when csum offload is enabled. Fixes: 0f3154e6bcb3 ("ionic: Add Tx and Rx handling") Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-04ionic: fix up dim accounting for tx and rxShannon Nelson1-7/+21
[ Upstream commit 76ed8a4a00b484dcccef819ef2618bcf8e46f560 ] We need to count the correct Tx and/or Rx packets for dynamic interrupt moderation, depending on which we're processing on the queue interrupt. Fixes: 04a834592bf5 ("ionic: dynamic interrupt moderation") Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-04ionic: remove intr coalesce update from napiShannon Nelson2-5/+13
[ Upstream commit a6ff85e0a2d9d074a4b4c291ba9ec1e5b0aba22b ] Move the interrupt coalesce value update out of the napi thread and into the dim_work thread and set it only when it has actually changed. Fixes: 04a834592bf5 ("ionic: dynamic interrupt moderation") Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-04i40e: Fix log TC creation failure when max num of queues is exceededJedrzej Jagielski1-0/+2
[ Upstream commit ea52faae1d17cd3048681d86d2e8641f44de484d ] Fix missing failed message if driver does not have enough queues to complete TC command. Without this fix no message is displayed in dmesg. Fixes: a9ce82f744dc ("i40e: Enable 'channel' mode in mqprio for TC configs") Signed-off-by: Grzegorz Szczurek <grzegorzx.szczurek@intel.com> Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Tested-by: Imam Hassan Reza Biswas <imam.hassan.reza.biswas@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-04i40e: Fix queue-to-TC mapping on TxJedrzej Jagielski3-0/+53
[ Upstream commit 89ec1f0886c127c7e41ac61a6b6d539f4fb2510b ] In SW DCB mode the packets sent receive incorrect UP tags. They are constructed correctly and put into tx_ring, but UP is later remapped by HW on the basis of TCTUPR register contents according to Tx queue selected, and BW used is consistent with the new UP values. This is caused by Tx queue selection in kernel not taking into account DCB configuration. This patch fixes the issue by implementing the ndo_select_queue NDO callback. Fixes: fd0a05ce74ef ("i40e: transmit, receive, and NAPI") Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Tested-by: Imam Hassan Reza Biswas <imam.hassan.reza.biswas@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-04i40e: Fix firmware LLDP agent related warningArkadiusz Kubalewski1-0/+4
[ Upstream commit 71d6fdba4b2d82fdd883fec31dee77fbcf59773a ] Make warning meaningful for the user. Previously the trace: "Starting FW LLDP agent failed: error: I40E_ERR_ADMIN_QUEUE_ERROR, I40E_AQ_RC_EAGAIN" was produced when user tried to start Firmware LLDP agent, just after it was stopped with sequence: ethtool --set-priv-flags <dev> disable-fw-lldp on ethtool --set-priv-flags <dev> disable-fw-lldp off (without any delay between the commands) At that point the firmware is still processing stop command, the behavior is expected. Fixes: c1041d070437 ("i40e: Missing response checks in driver when starting/stopping FW LLDP") Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Tested-by: Imam Hassan Reza Biswas <imam.hassan.reza.biswas@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-04i40e: Fix logic of disabling queuesArkadiusz Kubalewski1-24/+34
[ Upstream commit 65662a8dcdd01342b71ee44234bcfd0162e195af ] Correct the message flow between driver and firmware when disabling queues. Previously in case of PF reset (due to required reinit after reconfig), the error like: "VSI seid 397 Tx ring 60 disable timeout" could show up occasionally. The error was not a real issue of hardware or firmware, it was caused by wrong sequence of messages invoked by the driver. Fixes: 41c445ff0f48 ("i40e: main driver core") Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-04RDMA/bnxt_re: Fix stats countersNaresh Kumar PBS3-7/+8
[ Upstream commit 0c23af52ccd1605926480b5dfd1dd857ef604611 ] Statistical counters are not incrementing in some adapter versions with newer FW. This is due to the stats context length mismatch between FW and driver. Since the L2 driver updates the length correctly, use the stats length from L2 driver while allocating the DMA'able memory and creating the stats context. Fixes: 9d6b648c3112 ("bnxt_en: Update firmware interface spec to 1.10.1.65.") Link: https://lore.kernel.org/r/1626010296-6076-1-git-send-email-selvin.xavier@broadcom.com Signed-off-by: Naresh Kumar PBS <nareshkumar.pbs@broadcom.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-04nfc: nfcsim: fix use after free during module unloadKrzysztof Kozlowski1-2/+1
commit 5e7b30d24a5b8cb691c173b45b50e3ca0191be19 upstream. There is a use after free memory corruption during module exit: - nfcsim_exit() - nfcsim_device_free(dev0) - nfc_digital_unregister_device() This iterates over command queue and frees all commands, - dev->up = false - nfcsim_link_shutdown() - nfcsim_link_recv_wake() This wakes the sleeping thread nfcsim_link_recv_skb(). - nfcsim_link_recv_skb() Wake from wait_event_interruptible_timeout(), call directly the deb->cb callback even though (dev->up == false), - digital_send_cmd_complete() Dereference of "struct digital_cmd" cmd which was freed earlier by nfc_digital_unregister_device(). This causes memory corruption shortly after (with unrelated stack trace): nfc nfc0: NFC: nfcsim_recv_wq: Device is down llcp: nfc_llcp_recv: err -19 nfc nfc1: NFC: nfcsim_recv_wq: Device is down BUG: unable to handle page fault for address: ffffffffffffffed Call Trace: fsnotify+0x54b/0x5c0 __fsnotify_parent+0x1fe/0x300 ? vfs_write+0x27c/0x390 vfs_write+0x27c/0x390 ksys_write+0x63/0xe0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae KASAN report: BUG: KASAN: use-after-free in digital_send_cmd_complete+0x16/0x50 Write of size 8 at addr ffff88800a05f720 by task kworker/0:2/71 Workqueue: events nfcsim_recv_wq [nfcsim] Call Trace:  dump_stack_lvl+0x45/0x59  print_address_description.constprop.0+0x21/0x140  ? digital_send_cmd_complete+0x16/0x50  ? digital_send_cmd_complete+0x16/0x50  kasan_report.cold+0x7f/0x11b  ? digital_send_cmd_complete+0x16/0x50  ? digital_dep_link_down+0x60/0x60  digital_send_cmd_complete+0x16/0x50  nfcsim_recv_wq+0x38f/0x3d5 [nfcsim]  ? nfcsim_in_send_cmd+0x4a/0x4a [nfcsim]  ? lock_is_held_type+0x98/0x110  ? finish_wait+0x110/0x110  ? rcu_read_lock_sched_held+0x9c/0xd0  ? rcu_read_lock_bh_held+0xb0/0xb0  ? lockdep_hardirqs_on_prepare+0x12e/0x1f0 This flow of calling digital_send_cmd_complete() callback on driver exit is specific to nfcsim which implements reading and sending work queues. Since the NFC digital device was unregistered, the callback should not be called. Fixes: 204bddcb508f ("NFC: nfcsim: Make use of the Digital layer") Cc: <stable@vger.kernel.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-04drm/amdgpu: Fix resource leak on probe error pathJiri Kosina1-6/+2
commit d47255d3f87338164762ac56df1f28d751e27246 upstream. This reverts commit 4192f7b5768912ceda82be2f83c87ea7181f9980. It is not true (as stated in the reverted commit changelog) that we never unmap the BAR on failure; it actually does happen properly on amdgpu_driver_load_kms() -> amdgpu_driver_unload_kms() -> amdgpu_device_fini() error path. What's worse, this commit actually completely breaks resource freeing on probe failure (like e.g. failure to load microcode), as amdgpu_driver_unload_kms() notices adev->rmmio being NULL and bails too early, leaving all the resources that'd normally be freed in amdgpu_acpi_fini() and amdgpu_device_fini() still hanging around, leading to all sorts of oopses when someone tries to, for example, access the sysfs and procfs resources which are still around while the driver is gone. Fixes: 4192f7b57689 ("drm/amdgpu: unmap register bar on device init failure") Reported-by: Vojtech Pavlik <vojtech@ucw.cz> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-04drm/amdgpu: Avoid printing of stack contents on firmware load errorJiri Kosina1-4/+3
commit 6aade587d329ebe88319dfdb8e8c7b6aede80417 upstream. In case when psp_init_asd_microcode() fails to load ASD microcode file, psp_v12_0_init_microcode() tries to print the firmware filename that failed to load before bailing out. This is wrong because: - the firmware filename it would want it print is an incorrect one as psp_init_asd_microcode() and psp_v12_0_init_microcode() are loading different filenames - it tries to pri