summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2021-09-03Revert "floppy: reintroduce O_NDELAY fix"Denis Efremov1-15/+15
commit c7e9d0020361f4308a70cdfd6d5335e273eb8717 upstream. The patch breaks userspace implementations (e.g. fdutils) and introduces regressions in behaviour. Previously, it was possible to O_NDELAY open a floppy device with no media inserted or with write protected media without an error. Some userspace tools use this particular behavior for probing. It's not the first time when we revert this patch. Previous revert is in commit f2791e7eadf4 (Revert "floppy: refactor open() flags handling"). This reverts commit 8a0c014cd20516ade9654fc13b51345ec58e7be8. Link: https://lore.kernel.org/linux-block/de10cb47-34d1-5a88-7751-225ca380f735@compro.net/ Reported-by: Mark Hounschell <markh@compro.net> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Wim Osterholt <wim@djo.tudelft.nl> Cc: Kurt Garloff <kurt@garloff.de> Cc: <stable@vger.kernel.org> Signed-off-by: Denis Efremov <efremov@linux.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-03lkdtm: Enable DOUBLE_FAULT on all architecturesKees Cook1-2/+0
commit f123c42bbeff26bfe8bdb08a01307e92d51eec39 upstream Where feasible, I prefer to have all tests visible on all architectures, but to have them wired to XFAIL. DOUBLE_FAIL was set up to XFAIL, but wasn't actually being added to the test list. Fixes: cea23efb4de2 ("lkdtm/bugs: Make double-fault test always available") Cc: stable@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20210623203936.3151093-7-keescook@chromium.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> [sudip: adjust context] Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-03net: dsa: mt7530: fix VLAN traffic leaks againDENG Qingfang1-4/+1
commit 7428022b50d0fbb4846dd0f00639ea09d36dff02 upstream. When a port leaves a VLAN-aware bridge, the current code does not clear other ports' matrix field bit. If the bridge is later set to VLAN-unaware mode, traffic in the bridge may leak to that port. Remove the VLAN filtering check in mt7530_port_bridge_leave. Fixes: 474a2ddaa192 ("net: dsa: mt7530: fix VLAN traffic leaks") Fixes: 83163f7dca56 ("net: dsa: mediatek: add VLAN support for MT7530") Signed-off-by: DENG Qingfang <dqfext@gmail.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-03usb: typec: ucsi: Clear pending after acking connector changeBjorn Andersson1-1/+1
commit 8c9b3caab3ac26db1da00b8117901640c55a69dd upstream. It's possible that the interrupt handler for the UCSI driver signals a connector changes after the handler clears the PENDING bit, but before it has sent the acknowledge request. The result is that the handler is invoked yet again, to ack the same connector change. At least some versions of the Qualcomm UCSI firmware will not handle the second - "spurious" - acknowledgment gracefully. So make sure to not clear the pending flag until the change is acknowledged. Any connector changes coming in after the acknowledgment, that would have the pending flag incorrectly cleared, would afaict be covered by the subsequent connector status check. Fixes: 217504a05532 ("usb: typec: ucsi: Work around PPM losing change information") Cc: stable <stable@vger.kernel.org> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-By: Benjamin Berg <bberg@redhat.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210516040953.622409-1-bjorn.andersson@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-03usb: typec: ucsi: Work around PPM losing change informationBenjamin Berg2-20/+107
commit 217504a055325fe76ec1142aa15f14d3db77f94f upstream. Some/many PPMs are simply clearing the change bitfield when a notification on a port is acknowledge. Unfortunately, doing so means that any changes between the GET_CONNECTOR_STATUS and ACK_CC_CI commands is simply lost. Work around this by re-fetching the connector status afterwards. We can then infer any changes that we see have happened but that may not be respresented in the change bitfield. We end up with the following actions: 1. UCSI_GET_CONNECTOR_STATUS, store result, update unprocessed_changes 2. UCSI_GET_CAM_SUPPORTED, discard result 3. ACK connector change 4. UCSI_GET_CONNECTOR_STATUS, store result 5. Infere lost changes by comparing UCSI_GET_CONNECTOR_STATUS results 6. If PPM reported a new change, then restart in order to ACK 7. Process everything as usual. The worker is also changed to re-schedule itself if a new change notification happened while it was running. Doing this fixes quite commonly occurring issues where e.g. the UCSI power supply would remain online even thought the ThunderBolt cable was unplugged. Cc: Hans de Goede <hdegoede@redhat.com> Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Benjamin Berg <bberg@redhat.com> Link: https://lore.kernel.org/r/20201009144047.505957-3-benjamin@sipsolutions.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-03usb: typec: ucsi: acpi: Always decode connector change informationBenjamin Berg1-2/+3
commit 47ea2929d58c35598e681212311d35b240c373ce upstream. Normal commands may be reporting that a connector has changed. Always call the usci_connector_change handler and let it take care of scheduling the work when needed. Doing this makes the ACPI code path identical to the CCG one. Cc: Hans de Goede <hdegoede@redhat.com> Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Benjamin Berg <bberg@redhat.com> Link: https://lore.kernel.org/r/20201009144047.505957-2-benjamin@sipsolutions.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-03Bluetooth: btusb: check conditions before enabling USB ALT 3 for WBSPauli Virtanen1-8/+14
commit 55981d3541812234e687062926ff199c83f79a39 upstream. Some USB BT adapters don't satisfy the MTU requirement mentioned in commit e848dbd364ac ("Bluetooth: btusb: Add support USB ALT 3 for WBS") and have ALT 3 setting that produces no/garbled audio. Some adapters with larger MTU were also reported to have problems with ALT 3. Add a flag and check it and MTU before selecting ALT 3, falling back to ALT 1. Enable the flag for Realtek, restoring the previous behavior for non-Realtek devices. Tested with USB adapters (mtu<72, no/garbled sound with ALT3, ALT1 works) BCM20702A1 0b05:17cb, CSR8510A10 0a12:0001, and (mtu>=72, ALT3 works) RTL8761BU 0bda:8771, Intel AX200 8087:0029 (after disabling ALT6). Also got reports for (mtu>=72, ALT 3 reported to produce bad audio) Intel 8087:0a2b. Signed-off-by: Pauli Virtanen <pav@iki.fi> Fixes: e848dbd364ac ("Bluetooth: btusb: Add support USB ALT 3 for WBS") Tested-by: Michał Kępień <kernel@kempniu.pl> Tested-by: Jonathan Lampérth <jon@h4n.dev> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-03vt_kdsetmode: extend console lockingLinus Torvalds1-4/+6
commit 2287a51ba822384834dafc1c798453375d1107c7 upstream. As per the long-suffering comment. Reported-by: Minh Yuan <yuanmingbuaa@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jirislaby@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-03mtd: spinand: Fix incorrect parameters for on-die ECCFrieder Schrempf3-9/+9
The new generic NAND ECC framework stores the configuration and requirements in separate places since commit 93ef92f6f422 ("mtd: nand: Use the new generic ECC object"). In 5.10.x The SPI NAND layer still uses only the requirements to track the ECC properties. This mismatch leads to values of zero being used for ECC strength and step_size in the SPI NAND layer wherever nanddev_get_ecc_conf() is used and therefore breaks the SPI NAND on-die ECC support in 5.10.x. By using nanddev_get_ecc_requirements() instead of nanddev_get_ecc_conf() for SPI NAND, we make sure that the correct parameters for the detected chip are used. In later versions (5.11.x) this is fixed anyway with the implementation of the SPI NAND on-die ECC engine. Cc: stable@vger.kernel.org # 5.10.x Reported-by: voice INTER connect GmbH <developer@voiceinterconnect.de> Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Acked-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-03drm/nouveau/kms/nv50: workaround EFI GOP window channel format differencesBen Skeggs3-4/+37
[ Upstream commit e78b1b545c6cfe9f87fc577128e00026fff230ba ] Should fix some initial modeset failures on (at least) Ampere boards. Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-03drm/nouveau/disp: power down unused DP links during initBen Skeggs3-1/+11
[ Upstream commit 6eaa1f3c59a707332e921e32782ffcad49915c5e ] When booted with multiple displays attached, the EFI GOP driver on (at least) Ampere, can leave DP links powered up that aren't being used to display anything. This confuses our tracking of SOR routing, with the likely result being a failed modeset and display engine hang. Fix this by (ab?)using the DisableLT IED script to power-down the link, restoring HW to a state the driver expects. Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-03drm: Copy drm_wait_vblank to user before returningMark Yacoub1-3/+1
[ Upstream commit fa0b1ef5f7a694f48e00804a391245f3471aa155 ] [Why] Userspace should get back a copy of drm_wait_vblank that's been modified even when drm_wait_vblank_ioctl returns a failure. Rationale: drm_wait_vblank_ioctl modifies the request and expects the user to read it back. When the type is RELATIVE, it modifies it to ABSOLUTE and updates the sequence to become current_vblank_count + sequence (which was RELATIVE), but now it became ABSOLUTE. drmWaitVBlank (in libdrm) expects this to be the case as it modifies the request to be Absolute so it expects the sequence to would have been updated. The change is in compat_drm_wait_vblank, which is called by drm_compat_ioctl. This change of copying the data back regardless of the return number makes it en par with drm_ioctl, which always copies the data before returning. [How] Return from the function after everything has been copied to user. Fixes IGT:kms_flip::modeset-vs-vblank-race-interruptible Tested on ChromeOS Trogdor(msm) Reviewed-by: Michel Dänzer <mdaenzer@redhat.com> Signed-off-by: Mark Yacoub <markyacoub@chromium.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210812194917.1703356-1-markyacoub@chromium.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-03drm/amd/pm: change the workload type for some cardsKenneth Feng1-1/+14
[ Upstream commit 93c5701b00d50d192ce2247cb10d6c0b3fe25cd8 ] change the workload type for some cards as it is needed. Signed-off-by: Kenneth Feng <kenneth.feng@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-03Revert "drm/amd/pm: fix workload mismatch on vega10"Kenneth Feng1-1/+1
[ Upstream commit 2fd31689f9e44af949f60ff4f8aca013e628ab81 ] This reverts commit 0979d43259e13846d86ba17e451e17fec185d240. Revert this because it does not apply to all the cards. Signed-off-by: Kenneth Feng <kenneth.feng@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-03qed: Fix null-pointer dereference in qed_rdma_create_qp()Shai Malin1-2/+1
[ Upstream commit d33d19d313d3466abdf8b0428be7837aff767802 ] Fix a possible null-pointer dereference in qed_rdma_create_qp(). Changes from V2: - Revert checkpatch fixes. Reported-by: TOTE Robot <oslab@tsinghua.edu.cn> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: Shai Malin <smalin@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-03qed: qed ll2 race condition fixesShai Malin1-0/+20
[ Upstream commit 37110237f31105d679fc0aa7b11cdec867750ea7 ] Avoiding qed ll2 race condition and NULL pointer dereference as part of the remove and recovery flows. Changes form V1: - Change (!p_rx->set_prod_addr). - qed_ll2.c checkpatch fixes. Change from V2: - Revert "qed_ll2.c checkpatch fixes". Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: Shai Malin <smalin@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-03vringh: Use wiov->used to check for read/write desc orderNeeraj Upadhyay1-1/+1
[ Upstream commit e74cfa91f42c50f7f649b0eca46aa049754ccdbd ] As __vringh_iov() traverses a descriptor chain, it populates each descriptor entry into either read or write vring iov and increments that iov's ->used member. So, as we iterate over a descriptor chain, at any point, (riov/wriov)->used value gives the number of descriptor enteries available, which are to be read or written by the device. As all read iovs must precede the write iovs, wiov->used should be zero when we are traversing a read descriptor. Current code checks for wiov->i, to figure out whether any previous entry in the current descriptor chain was a write descriptor. However, iov->i is only incremented, when these vring iovs are consumed, at a later point, and remain 0 in __vringh_iov(). So, correct the check for read and write descriptor order, to use wiov->used. Acked-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Neeraj Upadhyay <neeraju@codeaurora.org> Link: https://lore.kernel.org/r/1624591502-4827-1-git-send-email-neeraju@codeaurora.org Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-03virtio_vdpa: reject invalid vq indicesVincent Whitchurch1-0/+3
[ Upstream commit cb5d2c1f6cc0e5769099a7d44b9d08cf58cae206 ] Do not call vDPA drivers' callbacks with vq indicies larger than what the drivers indicate that they support. vDPA drivers do not bounds check the indices. Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com> Link: https://lore.kernel.org/r/20210701114652.21956-1-vincent.whitchurch@axis.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-03virtio_pci: Support surprise removal of virtio pci deviceParav Pandit1-0/+7
[ Upstream commit 43bb40c5b92659966bdf4bfe584fde0a3575a049 ] When a virtio pci device undergo surprise removal (aka async removal in PCIe spec), mark the device as broken so that any upper layer drivers can abort any outstanding operation. When a virtio net pci device undergo surprise removal which is used by a NetworkManager, a below call trace was observed. kernel:watchdog: BUG: soft lockup - CPU#1 stuck for 26s! [kworker/1:1:27059] watchdog: BUG: soft lockup - CPU#1 stuck for 52s! [kworker/1:1:27059] CPU: 1 PID: 27059 Comm: kworker/1:1 Tainted: G S W I L 5.13.0-hotplug+ #8 Hardware name: Dell Inc. PowerEdge R640/0H28RR, BIOS 2.9.4 11/06/2020 Workqueue: events linkwatch_event RIP: 0010:virtnet_send_command+0xfc/0x150 [virtio_net] Call Trace: virtnet_set_rx_mode+0xcf/0x2a7 [virtio_net] ? __hw_addr_create_ex+0x85/0xc0 __dev_mc_add+0x72/0x80 igmp6_group_added+0xa7/0xd0 ipv6_mc_up+0x3c/0x60 ipv6_find_idev+0x36/0x80 addrconf_add_dev+0x1e/0xa0 addrconf_dev_config+0x71/0x130 addrconf_notify+0x1f5/0xb40 ? rtnl_is_locked+0x11/0x20 ? __switch_to_asm+0x42/0x70 ? finish_task_switch+0xaf/0x2c0 ? raw_notifier_call_chain+0x3e/0x50 raw_notifier_call_chain+0x3e/0x50 netdev_state_change+0x67/0x90 linkwatch_do_dev+0x3c/0x50 __linkwatch_run_queue+0xd2/0x220 linkwatch_event+0x21/0x30 process_one_work+0x1c8/0x370 worker_thread+0x30/0x380 ? process_one_work+0x370/0x370 kthread+0x118/0x140 ? set_kthread_struct+0x40/0x40 ret_from_fork+0x1f/0x30 Hence, add the ability to abort the command on surprise removal which prevents infinite loop and system lockup. Signed-off-by: Parav Pandit <parav@nvidia.com> Link: https://lore.kernel.org/r/20210721142648.1525924-5-parav@nvidia.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-03virtio: Improve vq->broken access to avoid any compiler optimizationParav Pandit1-2/+4
[ Upstream commit 60f0779862e4ab943810187752c462e85f5fa371 ] Currently vq->broken field is read by virtqueue_is_broken() in busy loop in one context by virtnet_send_command(). vq->broken is set to true in other process context by virtio_break_device(). Reader and writer are accessing it without any synchronization. This may lead to a compiler optimization which may result to optimize reading vq->broken only once. Hence, force reading vq->broken on each invocation of virtqueue_is_broken() and also force writing it so that such update is visible to the readers. It is a theoretical fix that isn't yet encountered in the field. Signed-off-by: Parav Pandit <parav@nvidia.com> Link: https://lore.kernel.org/r/20210721142648.1525924-2-parav@nvidia.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-03cpufreq: blocklist Qualcomm sm8150 in cpufreq-dt-platdevThara Gopinath1-0/+1
[ Upstream commit 5d79e5ce5489b489cbc4c327305be9dfca0fc9ce ] The Qualcomm sm8150 platform uses the qcom-cpufreq-hw driver, so add it to the cpufreq-dt-platdev driver's blocklist. Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-03opp: remove WARN when no valid OPPs remainMichał Mirosław1-2/+3
[ Upstream commit 335ffab3ef864539e814b9a2903b0ae420c1c067 ] This WARN can be triggered per-core and the stack trace is not useful. Replace it with plain dev_err(). Fix a comment while at it. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-03iwlwifi: pnvm: accept multiple HW-type TLVsJohannes Berg1-9/+16
[ Upstream commit 0f673c16c850250db386537a422c11d248fb123c ] Some products (So) may have two different types of products with different mac-type that are otherwise equivalent, and have the same PNVM data, so the PNVM file will contain two (or perhaps later more) HW-type TLVs. Accept the file and use the data section that contains any matching entry. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210719140154.a6a86e903035.Ic0b1b75c45d386698859f251518e8a5144431938@changeid Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-03clk: renesas: rcar-usb2-clock-sel: Fix kernel NULL pointer dereferenceAdam Ford1-1/+1
[ Upstream commit 1669a941f7c4844ae808cf441db51dde9e94db07 ] The probe was manually passing NULL instead of dev to devm_clk_hw_register. This caused a Unable to handle kernel NULL pointer dereference error. Fix this by passing 'dev'. Signed-off-by: Adam Ford <aford173@gmail.com> Fixes: a20a40a8bbc2 ("clk: renesas: rcar-usb2-clock-sel: Fix error handling in .probe()") Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-03usb: gadget: u_audio: fix race condition on endpoint stopJerome Brunet1-3/+2
[ Upstream commit 068fdad20454f815e61e6f6eb9f051a8b3120e88 ] If the endpoint completion callback is call right after the ep_enabled flag is cleared and before usb_ep_dequeue() is call, we could do a double free on the request and the associated buffer. Fix this by clearing ep_enabled after all the endpoint requests have been dequeued. Fixes: 7de8681be2cd ("usb: gadget: u_audio: Free requests only after callback") Cc: stable <stable@vger.kernel.org> Reported-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/20210827092927.366482-1-jbrunet@baylibre.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-03drm/i915: Fix syncmap memory leakMatthew Brost1-0/+8
[ Upstream commit a63bcf08f0efb5348105bb8e0e1e8c6671077753 ] A small race exists between intel_gt_retire_requests_timeout and intel_timeline_exit which could result in the syncmap not getting free'd. Rather than work to hard to seal this race, simply cleanup the syncmap on fini. unreferenced object 0xffff88813bc53b18 (size 96): comm "gem_close_race", pid 5410, jiffies 4294917818 (age 1105.600s) hex dump (first 32 bytes): 01 00 00 00 00 00 00 00 00 00 00 00 0a 00 00 00 ................ 00 00 00 00 00 00 00 00 6b 6b 6b 6b 06 00 00 00 ........kkkk.... backtrace: [<00000000120b863a>] __sync_alloc_leaf+0x1e/0x40 [i915] [<00000000042f6959>] __sync_set+0x1bb/0x240 [i915] [<0000000090f0e90f>] i915_request_await_dma_fence+0x1c7/0x400 [i915] [<0000000056a48219>] i915_request_await_object+0x222/0x360 [i915] [<00000000aaac4ee3>] i915_gem_do_execbuffer+0x1bd0/0x2250 [i915] [<000000003c9d830f>] i915_gem_execbuffer2_ioctl+0x405/0xce0 [i915] [<00000000fd7a8e68>] drm_ioctl_kernel+0xb0/0xf0 [drm] [<00000000e721ee87>] drm_ioctl+0x305/0x3c0 [drm] [<000000008b0d8986>] __x64_sys_ioctl+0x71/0xb0 [<0000000076c362a4>] do_syscall_64+0x33/0x80 [<00000000eb7a4831>] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Signed-off-by: Matthew Brost <matthew.brost@intel.com> Fixes: 531958f6f357 ("drm/i915/gt: Track timeline activeness in enter/exit") Cc: <stable@vger.kernel.org> Reviewed-by: John Harrison <John.C.Harrison@Intel.com> Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210730195342.110234-1-matthew.brost@intel.com (cherry picked from commit faf890985e30d5e88cc3a7c50c1bcad32f89ab7c) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-03net: stmmac: fix kernel panic due to NULL pointer dereference of plat->estWong Vee Khee1-5/+7
[ Upstream commit 82a44ae113b7b35850f4542f0443fcab221e376a ] In the case of taprio offload is not enabled, the error handling path causes a kernel crash due to kernel NULL pointer deference. Fix this by adding check for NULL before attempt to access 'plat->est' on the mutex_lock() call. The following kernel panic is observed without this patch: RIP: 0010:mutex_lock+0x10/0x20 Call Trace: tc_setup_taprio+0x482/0x560 [stmmac] kmem_cache_alloc_trace+0x13f/0x490 taprio_disable_offload.isra.0+0x9d/0x180 [sch_taprio] taprio_destroy+0x6c/0x100 [sch_taprio] qdisc_create+0x2e5/0x4f0 tc_modify_qdisc+0x126/0x740 rtnetlink_rcv_msg+0x12b/0x380 _raw_spin_lock_irqsave+0x19/0x40 _raw_spin_unlock_irqrestore+0x18/0x30 create_object+0x212/0x340 rtnl_calcit.isra.0+0x110/0x110 netlink_rcv_skb+0x50/0x100 netlink_unicast+0x191/0x230 netlink_sendmsg+0x243/0x470 sock_sendmsg+0x5e/0x60 ____sys_sendmsg+0x20b/0x280 copy_msghdr_from_user+0x5c/0x90 __mod_memcg_state+0x87/0xf0 ___sys_sendmsg+0x7c/0xc0 lru_cache_add+0x7f/0xa0 _raw_spin_unlock+0x16/0x30 wp_page_copy+0x449/0x890 handle_mm_fault+0x921/0xfc0 __sys_sendmsg+0x59/0xa0 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xa9 ---[ end trace b1f19b24368a96aa ]--- Fixes: b60189e0392f ("net: stmmac: Integrate EST with TAPRIO scheduler API") Cc: <stable@vger.kernel.org> # 5.10.x Signed-off-by: Wong Vee Khee <vee.khee.wong@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-03net: stmmac: add mutex lock to protect est parametersXiaoliang Yang1-1/+13
[ Upstream commit b2aae654a4794ef898ad33a179f341eb610f6b85 ] Add a mutex lock to protect est structure parameters so that the EST parameters can be updated by other threads. Signed-off-by: Xiaoliang Yang <xiaoliang.yang_1@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Pavel Machek (CIP) <pavel@denx.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-03Revert "mmc: sdhci-iproc: Set SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN on BCM2711"Ulf Hansson1-2/+1
[ Upstream commit 885814a97f5a1a2daf66bde5f2076f0bf632c174 ] This reverts commit 419dd626e357e89fc9c4e3863592c8b38cfe1571. It turned out that the change from the reverted commit breaks the ACPI based rpi's because it causes the 100Mhz max clock to be overridden to the return from sdhci_iproc_get_max_clock(), which is 0 because there isn't a OF/DT based clock device. Reported-by: Jeremy Linton <jeremy.linton@arm.com> Fixes: 419dd626e357 ("mmc: sdhci-iproc: Set SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN on BCM2711") Acked-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-03net: hns3: fix get wrong pfc_en when query PFC configurationGuangbin Huang1-11/+2
[ Upstream commit 8c1671e0d13d4a0ba4fb3a0da932bf3736d7ff73 ] Currently, when query PFC configuration by dcbtool, driver will return PFC enable status based on TC. As all priorities are mapped to TC0 by default, if TC0 is enabled, then all priorities mapped to TC0 will be shown as enabled status when query PFC setting, even though some priorities have never been set. for example: $ dcb pfc show dev eth0 pfc-cap 4 macsec-bypass off delay 0 prio-pfc 0:off 1:off 2:off 3:off 4:off 5:off 6:off 7:off $ dcb pfc set dev eth0 prio-pfc 0:on 1:on 2:on 3:on $ dcb pfc show dev eth0 pfc-cap 4 macsec-bypass off delay 0 prio-pfc 0:on 1:on 2:on 3:on 4:on 5:on 6:on 7:on To fix this problem, just returns user's PFC config parameter saved in driver. Fixes: cacde272dd00 ("net: hns3: Add hclge_dcb module for the support of DCB feature") Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-03net: hns3: fix duplicate node in VLAN listGuojia Liao1-1/+5
[ Upstream commit 94391fae82f71c98ecc7716a32611fcca73c74eb ] VLAN list should not be added duplicate VLAN node, otherwise it would cause "add failed" when restore VLAN from VLAN list, so this patch adds VLAN ID check before adding node into VLAN list. Fixes: c6075b193462 ("net: hns3: Record VF vlan tables") Signed-off-by: Guojia Liao <liaoguojia@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-03net: hns3: add waiting time before cmdq memory is releasedYufeng Mo4-2/+13
[ Upstream commit a96d9330b02a3d051ae689bc2c5e7d3a2ba25594 ] After the cmdq registers are cleared, the firmware may take time to clear out possible left over commands in the cmdq. Driver must release cmdq memory only after firmware has completed processing of left over commands. Fixes: 232d0d55fca6 ("net: hns3: uninitialize command queue while unloading PF driver") Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-03net: hns3: clear hardware resource when loading driverYufeng Mo2-0/+29
[ Upstream commit 1a6d281946c330cee2855f6d0cd796616e54601f ] If a PF is bonded to a virtual machine and the virtual machine exits unexpectedly, some hardware resource cannot be cleared. In this case, loading driver may cause exceptions. Therefore, the hardware resource needs to be cleared when the driver is loaded. Fixes: 46a3df9f9718 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support") Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-03cxgb4: dont touch blocked freelist bitmap after freeRahul Lakkireddy1-4/+3
[ Upstream commit 43fed4d48d325e0a61dc2638a84da972fbb1087b ] When adapter init fails, the blocked freelist bitmap is already freed up and should not be touched. So, move the bitmap zeroing closer to where it was successfully allocated. Also handle adapter init failure unwind path immediately and avoid setting up RDMA memory windows. Fixes: 5b377d114f2b ("cxgb4: Add debugfs facility to inject FL starvation") Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-03net: marvell: fix MVNETA_TX_IN_PRGRS bit numberMaxim Kiselev1-1/+1
[ Upstream commit 359f4cdd7d78fdf8c098713b05fee950a730f131 ] According to Armada XP datasheet bit at 0 position is corresponding for TxInProg indication. Fixes: c5aff18204da ("net: mvneta: driver for Marvell Armada 370/XP network unit") Signed-off-by: Maxim Kiselev <bigunclemax@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-03xgene-v2: Fix a resource leak in the error handling path of 'xge_probe()'Christophe JAILLET1-1/+3
[ Upstream commit 5ed74b03eb4d08f5dd281dcb5f1c9bb92b363a8d ] A successful 'xge_mdio_config()' call should be balanced by a corresponding 'xge_mdio_remove()' call in the error handling path of the probe, as already done in the remove function. Update the error handling path accordingly. Fixes: ea8ab16ab225 ("drivers: net: xgene-v2: Add MDIO support") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-03RDMA/efa: Free IRQ vectors on error flowGal Pressman1-0/+1
[ Upstream commit dbe986bdfd6dfe6ef24b833767fff4151e024357 ] Make sure to free the IRQ vectors in case the allocation doesn't return the expected number of IRQs. Fixes: b7f5e880f377 ("RDMA/efa: Add the efa module") Link: https://lore.kernel.org/r/20210811151131.39138-2-galpress@amazon.com Reviewed-by: Firas JahJah <firasj@amazon.com> Reviewed-by: Yossi Leybovich <sleybo@amazon.com> Signed-off-by: Gal Pressman <galpress@amazon.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-03e1000e: Do not take care about recovery NVM checksumSasha Neftin1-7/+11
[ Upstream commit 4051f68318ca9f3d3becef3b54e70ad2c146df97 ] On new platforms, the NVM is read-only. Attempting to update the NVM is causing a lockup to occur. Do not attempt to write to the NVM on platforms where it's not supported. Emit an error message when the NVM checksum is invalid. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=213667 Fixes: fb776f5d57ee ("e1000e: Add support for Tiger Lake") Suggested-by: Dima Ruinskiy <dima.ruinskiy@intel.com> Suggested-by: Vitaly Lifshits <vitaly.lifshits@intel.com> Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-03e1000e: Fix the max snoop/no-snoop latency for 10MSasha Neftin2-1/+16
[ Upstream commit 44a13a5d99c71bf9e1676d9e51679daf4d7b3d73 ] We should decode the latency and the max_latency before directly compare. The latency should be presented as lat_enc = scale x value: lat_enc_d = (lat_enc & 0x0x3ff) x (1U << (5*((max_ltr_enc & 0x1c00) >> 10))) Fixes: cf8fb73c23aa ("e1000e: add support for LTR on I217/I218") Suggested-by: Yee Li <seven.yi.lee@gmail.com> Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-03igc: Use num_tx_queues when iterating over tx_ring queueToshiki Nishioka1-2/+2
[ Upstream commit 691bd4d7761992914a0e83c27a4ce57d01474cda ] Use num_tx_queues rather than the IGC_MAX_TX_QUEUES fixed number 4 when iterating over tx_ring queue since instantiated queue count could be less than 4 where on-line cpu count is less than 4. Fixes: ec50a9d437f0 ("igc: Add support for taprio offloading") Signed-off-by: Toshiki Nishioka <toshiki.nishioka@intel.com> Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com> Tested-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com> Acked-by: Sasha Neftin <sasha.neftin@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-03igc: fix page fault when thunderbolt is unpluggedAaron Ma2-14/+21
[ Upstream commit 4b79959510e6612d80f8d86022e0cb44eee6f4a2 ] After unplug thunderbolt dock with i225, pciehp interrupt is triggered, remove call will read/write mmio address which is already disconnected, then cause page fault and make system hang. Check PCI state to remove device safely. Trace: BUG: unable to handle page fault for address: 000000000000b604 Oops: 0000 [#1] SMP NOPTI RIP: 0010:igc_rd32+0x1c/0x90 [igc] Call Trace: igc_ptp_suspend+0x6c/0xa0 [igc] igc_ptp_stop+0x12/0x50 [igc] igc_remove+0x7f/0x1c0 [igc] pci_device_remove+0x3e/0xb0 __device_release_driver+0x181/0x240 Fixes: 13b5b7fd6a4a ("igc: Add support for Tx/Rx rings") Fixes: b03c49cde61f ("igc: Save PTP time before a reset") Signed-off-by: Aaron Ma <aaron.ma@canonical.com> Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-03net: usb: pegasus: fixes of set_register(s) return value evaluation;Petko Manolov1-2/+2
[ Upstream commit ffc9c3ebb4af870a121da99826e9ccb63dc8b3d7 ] - restore the behavior in enable_net_traffic() to avoid regressions - Jakub Kicinski; - hurried up and removed redundant assignment in pegasus_open() before yet another checker complains; Fixes: 8a160e2e9aeb ("net: usb: pegasus: Check the return value of get_geristers() and friends;") Reported-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Petko Manolov <petko.manolov@konsulko.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-03ice: do not abort devlink info if board identifier can't be foundJacob Keller1-1/+3
[ Upstream commit a8f89fa27773a8c96fd09fb4e2f4892d794f21f6 ] The devlink dev info command reports version information about the device and firmware running on the board. This includes the "board.id" field which is supposed to represent an identifier of the board design. The ice driver uses the Product Board Assembly identifier for this. In some cases, the PBA is not present in the NVM. If this happens, devlink dev info will fail with an error. Instead, modify the ice_info_pba function to just exit without filling in the context buffer. This will cause the board.id field to be skipped. Log a dev_dbg message in case someone wants to confirm why board.id is not showing up for them. Fixes: e961b679fb0b ("ice: add board identifier info to devlink .info_get") Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20210819223451.245613-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-03RDMA/bnxt_re: Remove unpaired rtnl unlock in bnxt_re_dev_init()Dinghao Liu1-1/+0
[ Upstream commit a036ad088306a88de87e973981f2b9224e466c3f ] The fixed commit removes all rtnl_lock() and rtnl_unlock() calls in function bnxt_re_dev_init(), but forgets to remove a rtnl_unlock() in the error handling path of bnxt_re_register_netdev(), which may cause a deadlock. This bug is suggested by a static analysis tool. Fixes: c2b777a95923 ("RDMA/bnxt_re: Refactor device add/remove functionalities") Link: https://lore.kernel.org/r/20210816085531.12167-1-dinghao.liu@zju.edu.cn Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Acked-by: Selvin Xavier <selvin.xavier@broadcom.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-03IB/hfi1: Fix possible null-pointer dereference in _extend_sdma_tx_descs()Tuo Li1-5/+4
[ Upstream commit cbe71c61992c38f72c2b625b2ef25916b9f0d060 ] kmalloc_array() is called to allocate memory for tx->descp. If it fails, the function __sdma_txclean() is called: __sdma_txclean(dd, tx); However, in the function __sdma_txclean(), tx-descp is dereferenced if tx->num_desc is not zero: sdma_unmap_desc(dd, &tx->descp[0]); To fix this possible null-pointer dereference, assign the return value of kmalloc_array() to a local variable descp, and then assign it to tx->descp if it is not NULL. Otherwise, go to enomem. Fixes: 7724105686e7 ("IB/hfi1: add driver files") Link: https://lore.kernel.org/r/20210806133029.194964-1-islituo@gmail.com Reported-by: TOTE Robot <oslab@tsinghua.edu.cn> Signed-off-by: Tuo Li <islituo@gmail.com> Tested-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com> Acked-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-03RDMA/bnxt_re: Add missing spin lock initializationNaresh Kumar PBS1-0/+1
[ Upstream commit 17f2569dce1848080825b8336e6b7c6900193b44 ] Add the missing initialization of srq lock. Fixes: 37cb11acf1f7 ("RDMA/bnxt_re: Add SRQ support for Broadcom adapters") Link: https://lore.kernel.org/r/1629343553-5843-3-git-send-email-selvin.xavier@broadcom.com Signed-off-by: Naresh Kumar PBS <nareshkumar.pbs@broadcom.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-03scsi: core: Fix hang of freezing queue between blocking and running deviceLi Jinlin1-3/+6
commit 02c6dcd543f8f051973ee18bfbc4dc3bd595c558 upstream. We found a hang, the steps to reproduce are as follows: 1. blocking device via scsi_device_set_state() 2. dd if=/dev/sda of=/mnt/t.log bs=1M count=10 3. echo none > /sys/block/sda/queue/scheduler 4. echo "running" >/sys/block/sda/device/state Step 3 and 4 should complete after step 4, but they hang. CPU#0 CPU#1 CPU#2 --------------- ---------------- ---------------- Step 1: blocking device Step 2: dd xxxx ^^^^^^ get request q_usage_counter++ Step 3: switching scheculer elv_iosched_store elevator_switch blk_mq_freeze_queue blk_freeze_queue > blk_freeze_queue_start ^^^^^^ mq_freeze_depth++ > blk_mq_run_hw_queues ^^^^^^ can't run queue when dev blocked > blk_mq_freeze_queue_wait ^^^^^^ Hang here!!! wait q_usage_counter==0 Step 4: running device store_state_field scsi_rescan_device scsi_attach_vpd scsi_vpd_inquiry __scsi_execute blk_get_request blk_mq_alloc_request blk_queue_enter ^^^^^^ Hang here!!! wait mq_freeze_depth==0 blk_mq_run_hw_queues ^^^^^^ dispatch IO, q_usage_counter will reduce to zero blk_mq_unfreeze_queue ^^^^^ mq_freeze_depth-- To fix this, we need to run queue before rescanning device when the device state changes to SDEV_RUNNING. Link: https://lore.kernel.org/r/20210824025921.3277629-1-lijinlin3@huawei.com Fixes: f0f82e2476f6 ("scsi: core: Fix capacity set to zero after offlinining device") Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Li Jinlin <lijinlin3@huawei.com> Signed-off-by: Qiu Laibin <qiulaibin@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-03usb: dwc3: gadget: Stop EP0 transfers during pullup disableWesley Cheng1-4/+3
commit 4a1e25c0a029b97ea4a3d423a6392bfacc3b2e39 upstream. During a USB cable disconnect, or soft disconnect scenario, a pending SETUP transaction may not be completed, leading to the following error: dwc3 a600000.dwc3: timed out waiting for SETUP phase If this occurs, then the entire pullup disable routine is skipped and proper cleanup and halting of the controller does not complete. Instead of returning an error (which is ignored from the UDC perspective), allow the pullup disable routine to continue, which will also handle disabling of EP0/1. This will end any active transfers as well. Ensure to clear any delayed_status also, as the timeout could happen within the STATUS