| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
commit bd7ffbc3ca12629aeb66fb9e28cf42b7f37e3e3b upstream.
When locking a region, we currently clamp to a PAGE_SIZE as the minimum
lock region. While this is valid for Midgard, it is invalid for Bifrost,
where the minimum locking size is 8x larger than the 4k page size. Add a
hardware definition for the minimum lock region size (corresponding to
KBASE_LOCK_REGION_MIN_SIZE_LOG2 in kbase) and respect it.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Tested-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210824173028.7528-4-alyssa.rosenzweig@collabora.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a77b58825d7221d4a45c47881c35a47ba003aa73 upstream.
Mali virtual addresses are 48-bit. Use a u64 instead of size_t to ensure
we can express the "lock everything" condition as ~0ULL without
overflow. This code was silently broken on any platform where a size_t
is less than 48-bits; in particular, it was broken on 32-bit armv7
platforms which remain in use with panfrost. (Mainly RK3288)
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Suggested-by: Rob Herring <robh@kernel.org>
Tested-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Fixes: f3ba91228e8e ("drm/panfrost: Add initial panfrost driver")
Cc: <stable@vger.kernel.org>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210824173028.7528-3-alyssa.rosenzweig@collabora.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b5fab345654c603c07525100d744498f28786929 upstream.
In lock_region, simplify the calculation of the region_width parameter.
This field is the size, but encoded as ceil(log2(size)) - 1.
ceil(log2(size)) may be computed directly as fls(size - 1). However, we
want to use the 64-bit versions as the amount to lock can exceed
32-bits.
This avoids undefined (and completely wrong) behaviour when locking all
memory (size ~0). In this case, the old code would "round up" ~0 to the
nearest page, overflowing to 0. Since fls(0) == 0, this would calculate
a region width of 10 + 0 = 10. But then the code would shift by
(region_width - 11) = -1. As shifting by a negative number is undefined,
UBSAN flags the bug. Of course, even if it were defined the behaviour is
wrong, instead of locking all memory almost none would get locked.
The new form of the calculation corrects this special case and avoids
the undefined behaviour.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reported-and-tested-by: Chris Morgan <macromorgan@hotmail.com>
Fixes: f3ba91228e8e ("drm/panfrost: Add initial panfrost driver")
Cc: <stable@vger.kernel.org>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210824173028.7528-2-alyssa.rosenzweig@collabora.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a7a9d11e12fcc32160d55e8612e72e5ab51b15dc upstream.
[Why]
Drop hardcoded dispclk, dppclk, phyclk
[How]
Read the corresponding values from clock table entries already populated.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1403
Cc: stable@vger.kernel.org
Signed-off-by: Jerry (Fangzhi) Zuo <Jerry.Zuo@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0bbf06d888734041e813b916d7821acd4f72005a upstream.
[Why & How]
The DCN3 SoC parameter num_states was calculated but not saved into the
object.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1403
Cc: stable@vger.kernel.org
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ea7acd7c5967542353430947f3faf699e70602e5 upstream.
With added CPU domain to placement you can have
now 3 placemnts at once.
CC: stable@kernel.org
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210622162339.761651-5-andrey.grodzovsky@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7fdc48cc63a30fa3480d18bdd8c5fff2b9b15212 upstream.
Jobs can be in-flight when the file descriptor is closed (either because
the process did not terminate properly, or because it didn't wait for
all GPU jobs to be finished), and apparently panfrost_job_close() does
not cancel already running jobs. Let's refcount the MMU context object
so it's lifetime is no longer bound to the FD lifetime and running jobs
can finish properly without generating spurious page faults.
Reported-by: Icecream95 <ixn@keemail.me>
Fixes: 7282f7645d06 ("drm/panfrost: Implement per FD address spaces")
Cc: <stable@vger.kernel.org>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210621133907.1683899-2-boris.brezillon@collabora.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 92bd92c44d0d9be5dcbcda315b4be4b909ed9740 upstream.
Commit 2f015ec6eab6 ("drm/dp_mst: Add sideband down request tracing +
selftests") added some debug code for sideband message tracing. But
it seems to have unintentionally changed the behavior on sideband message
failure. It catches and returns failure only if DRM_UT_DP is enabled.
Otherwise it ignores the error code and returns success. So on an MST
unplug, the caller is unaware that the clear payload message failed and
ends up waiting for 4 seconds for the response. Fixes the issue by
returning the proper error code.
Changes in V2:
-- Revise commit text as review comment
-- add Fixes text
Changes in V3:
-- remove "unlikely" optimization
Fixes: 2f015ec6eab6 ("drm/dp_mst: Add sideband down request tracing + selftests")
Cc: <stable@vger.kernel.org> # v5.5+
Signed-off-by: Rajkumar Subbiah <rsubbia@codeaurora.org>
Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1625585434-9562-1-git-send-email-khsieh@codeaurora.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit cb0927ab80d224c9074f53d1a55b087d12ec5a85 upstream.
Without this fix boot throws NULL ptr exception at msm_dsi_manager_setup_encoder
on devices like Nexus 7 2013 (MDP4 v4.4).
Fixes: 03436e3ec69c ("drm/msm/dsi: Move setup_encoder to modeset_init")
Cc: <stable@vger.kernel.org>
Signed-off-by: David Heidelberg <david@ixit.cz>
Link: https://lore.kernel.org/r/20210811170631.39296-1-david@ixit.cz
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 147696720eca12ae48d020726208b9a61cdd80bc upstream.
Put the clock-selection code into each of the PLL-update functions to
make them select the correct pixel clock. Instead of copying the code,
introduce a new helper WREG_MISC_MASKED, which does masked writes into
<MISC>. Use it from each individual PLL update function.
The pixel clock for video output was not actually set before programming
the clock's values. It worked because the device had the correct clock
pre-set.
v2:
* don't duplicate <MISC> update code (Sam)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: db05f8d3dc87 ("drm/mgag200: Split MISC register update into PLL selection, SYNC and I/O")
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Emil Velikov <emil.velikov@collabora.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v5.9+
Link: https://patchwork.freedesktop.org/patch/msgid/20210714142240.21979-2-tzimmermann@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 552799f8b3b0074d2617f53a63a088f9514a66e3 upstream.
Currently, outgoing packets larger than 1496 bytes are dropped when
tagged VLAN is used on a switch port.
Add the frame check sequence length to the value of the register
GSWIP_MAC_FLEN to fix this. This matches the lantiq_ppa vendor driver,
which uses a value consisting of 1518 bytes for the MAC frame, plus the
lengths of special tag and VLAN tags.
Fixes: 14fceff4771e ("net: dsa: Add Lantiq / Intel DSA driver for vrx200")
Cc: stable@vger.kernel.org
Signed-off-by: Jan Hoffmann <jan@3e8.eu>
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3abc16af57c9939724df92fcbda296b25cc95168 upstream.
Sometimes kernel is trying to probe Fingerprint MCU (FPMCU) when it
hasn't initialized SPI yet. This can happen because FPMCU is restarted
during system boot and kernel can send message in short window
eg. between sysjump to RW and SPI initialization.
Cc: <stable@vger.kernel.org> # 4.4+
Signed-off-by: Patryk Duda <pdk@semihalf.com>
Link: https://lore.kernel.org/r/20210518140758.29318-1-pdk@semihalf.com
Signed-off-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 32b2397c1e56f33b0b1881def965bb89bd12f448 upstream.
There is a use after free crash when the pmem driver tears down its
mapping while I/O is still inbound.
This is triggered by driver unbind, "ndctl destroy-namespace", while I/O
is in flight.
Fix the sequence of blk_cleanup_queue() vs memunmap().
The crash signature is of the form:
BUG: unable to handle page fault for address: ffffc90080200000
CPU: 36 PID: 9606 Comm: systemd-udevd
Call Trace:
? pmem_do_bvec+0xf9/0x3a0
? xas_alloc+0x55/0xd0
pmem_rw_page+0x4b/0x80
bdev_read_page+0x86/0xb0
do_mpage_readpage+0x5d4/0x7a0
? lru_cache_add+0xe/0x10
mpage_readpages+0xf9/0x1c0
? bd_link_disk_holder+0x1a0/0x1a0
blkdev_readpages+0x1d/0x20
read_pages+0x67/0x1a0
ndctl Call Trace in vmcore:
PID: 23473 TASK: ffff88c4fbbe8000 CPU: 1 COMMAND: "ndctl"
__schedule
schedule
blk_mq_freeze_queue_wait
blk_freeze_queue
blk_cleanup_queue
pmem_release_queue
devm_action_release
release_nodes
devres_release_all
device_release_driver_internal
device_driver_detach
unbind_store
Cc: <stable@vger.kernel.org>
Signed-off-by: sumiyawang <sumiyawang@tencent.com>
Reviewed-by: yongduan <yongduan@tencent.com>
Link: https://lore.kernel.org/r/1629632949-14749-1-git-send-email-sumiyawang@tencent.com
Fixes: 50f44ee7248a ("mm/devm_memremap_pages: fix final page put race")
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f34ee9cb2c5ac5af426fee6fa4591a34d187e696 upstream.
In the numa=off kernel command-line configuration init_chip_info() loops
around the number of chips and attempts to copy the cpumask of that node
which is NULL for all iterations after the first chip.
Hence, store the cpu mask for each chip instead of derving cpumask from
node while populating the "chips" struct array and copy that to the
chips[i].mask
Fixes: 053819e0bf84 ("cpufreq: powernv: Handle throttling due to Pmax capping at chip level")
Cc: stable@vger.kernel.org # v4.3+
Reported-by: Shirisha Ganta <shirisha.ganta1@ibm.com>
Signed-off-by: Pratik R. Sampat <psampat@linux.ibm.com>
Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
[mpe: Rename goto label to out_free_chip_cpu_mask]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210728120500.87549-2-psampat@linux.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c8fadf019964d0eb1da410ba8b629494d3339db9 upstream.
The first invocation of function find_first_zero_bit will return 0 and
queue_id gets set to 0.
An index of queue_pair_map also gets set to 0.
qpair_id = find_first_zero_bit(ha->qpair_qid_map, ha->max_qpairs);
set_bit(qpair_id, ha->qpair_qid_map);
ha->queue_pair_map[qpair_id] = qpair;
In the alloc_queue callback driver checks the map, if queue is already
allocated:
ha->queue_pair_map[qidx]
This works fine as long as max_qpairs is greater than nvme_max_hw_queues(8)
since the size of the queue_pair_map is equal to max_qpair. In case nr_cpus
is less than 8, max_qpairs is less than 8. This creates wrong value
returned as qpair.
[ 1572.353669] qla2xxx [0000:24:00.3]-2121:6: Returning existing qpair of 4e00000000000000 for idx=2
[ 1572.354458] general protection fault: 0000 [#1] SMP PTI
[ 1572.354461] CPU: 1 PID: 44 Comm: kworker/1:1H Kdump: loaded Tainted: G IOE --------- - - 4.18.0-304.el8.x86_64 #1
[ 1572.354462] Hardware name: HP ProLiant DL380p Gen8, BIOS P70 03/01/2013
[ 1572.354467] Workqueue: kblockd blk_mq_run_work_fn
[ 1572.354485] RIP: 0010:qla_nvme_post_cmd+0x92/0x760 [qla2xxx]
[ 1572.354486] Code: 84 24 5c 01 00 00 00 00 b8 0a 74 1e 66 83 79 48 00 0f 85 a8 03 00 00 48 8b 44 24 08 48 89 ee 4c 89 e7 8b 50 24 e8 5e 8e 00 00 <f0> 41 ff 47 04 0f ae f0 41 f6 47 24 04 74 19 f0 41 ff 4f 04 b8 f0
[ 1572.354487] RSP: 0018:ffff9c81c645fc90 EFLAGS: 00010246
[ 1572.354489] RAX: 0000000000000001 RBX: ffff8ea3e5070138 RCX: 0000000000000001
[ 1572.354490] RDX: 0000000000000001 RSI: 0000000000000001 RDI: ffff8ea4c866b800
[ 1572.354491] RBP: ffff8ea4c866b800 R08: 0000000000005010 R09: ffff8ea4c866b800
[ 1572.354492] R10: 0000000000000001 R11: 000000069d1ca3ff R12: ffff8ea4bc460000
[ 1572.354493] R13: ffff8ea3e50702b0 R14: ffff8ea4c4c16a58 R15: 4e00000000000000
[ 1572.354494] FS: 0000000000000000(0000) GS:ffff8ea4dfd00000(0000) knlGS:0000000000000000
[ 1572.354495] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1572.354496] CR2: 000055884504fa58 CR3: 00000005a1410001 CR4: 00000000000606e0
[ 1572.354497] Call Trace:
[ 1572.354503] ? check_preempt_curr+0x62/0x90
[ 1572.354506] ? dma_direct_map_sg+0x72/0x1f0
[ 1572.354509] ? nvme_fc_start_fcp_op.part.32+0x175/0x460 [nvme_fc]
[ 1572.354511] ? blk_mq_dispatch_rq_list+0x11c/0x730
[ 1572.354515] ? __switch_to_asm+0x35/0x70
[ 1572.354516] ? __switch_to_asm+0x41/0x70
[ 1572.354518] ? __switch_to_asm+0x35/0x70
[ 1572.354519] ? __switch_to_asm+0x41/0x70
[ 1572.354521] ? __switch_to_asm+0x35/0x70
[ 1572.354522] ? __switch_to_asm+0x41/0x70
[ 1572.354523] ? __switch_to_asm+0x35/0x70
[ 1572.354525] ? entry_SYSCALL_64_after_hwframe+0xb9/0xca
[ 1572.354527] ? __switch_to_asm+0x41/0x70
[ 1572.354529] ? __blk_mq_sched_dispatch_requests+0xc6/0x170
[ 1572.354531] ? blk_mq_sched_dispatch_requests+0x30/0x60
[ 1572.354532] ? __blk_mq_run_hw_queue+0x51/0xd0
[ 1572.354535] ? process_one_work+0x1a7/0x360
[ 1572.354537] ? create_worker+0x1a0/0x1a0
[ 1572.354538] ? worker_thread+0x30/0x390
[ 1572.354540] ? create_worker+0x1a0/0x1a0
[ 1572.354541] ? kthread+0x116/0x130
[ 1572.354543] ? kthread_flush_work_fn+0x10/0x10
[ 1572.354545] ? ret_from_fork+0x35/0x40
Fix is to use index 0 for admin and first IO queue.
Link: https://lore.kernel.org/r/20210810043720.1137-14-njavali@marvell.com
Fixes: e84067d74301 ("scsi: qla2xxx: Add FC-NVMe F/W initialization and transport registration")
Cc: stable@vger.kernel.org
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 62e0dec59c1e139dab55aff5aa442adc97804271 upstream.
Avoid allocating firmware dump and only allocate a single queue for a kexec
kernel.
Link: https://lore.kernel.org/r/20210810043720.1137-12-njavali@marvell.com
Cc: stable@vger.kernel.org
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 44d01fc86d952f5a8b8b32bdb4841504d5833d95 upstream.
Update BusLogic driver's messaging system to use pr_cont() for continuation
lines, bringing messy output:
pci 0000:00:13.0: PCI->APIC IRQ transform: INT A -> IRQ 17
scsi: ***** BusLogic SCSI Driver Version 2.1.17 of 12 September 2013 *****
scsi: Copyright 1995-1998 by Leonard N. Zubkoff <lnz@dandelion.com>
scsi0: Configuring BusLogic Model BT-958 PCI Wide Ultra SCSI Host Adapter
scsi0: Firmware Version: 5.07B, I/O Address: 0x7000, IRQ Channel: 17/Level
scsi0: PCI Bus: 0, Device: 19, Address:
0xE0012000,
Host Adapter SCSI ID: 7
scsi0: Parity Checking: Enabled, Extended Translation: Enabled
scsi0: Synchronous Negotiation: Ultra, Wide Negotiation: Enabled
scsi0: Disconnect/Reconnect: Enabled, Tagged Queuing: Enabled
scsi0: Scatter/Gather Limit: 128 of 8192 segments, Mailboxes: 211
scsi0: Driver Queue Depth: 211, Host Adapter Queue Depth: 192
scsi0: Tagged Queue Depth:
Automatic
, Untagged Queue Depth: 3
scsi0: SCSI Bus Termination: Both Enabled
, SCAM: Disabled
scsi0: *** BusLogic BT-958 Initialized Successfully ***
scsi host0: BusLogic BT-958
back to order:
pci 0000:00:13.0: PCI->APIC IRQ transform: INT A -> IRQ 17
scsi: ***** BusLogic SCSI Driver Version 2.1.17 of 12 September 2013 *****
scsi: Copyright 1995-1998 by Leonard N. Zubkoff <lnz@dandelion.com>
scsi0: Configuring BusLogic Model BT-958 PCI Wide Ultra SCSI Host Adapter
scsi0: Firmware Version: 5.07B, I/O Address: 0x7000, IRQ Channel: 17/Level
scsi0: PCI Bus: 0, Device: 19, Address: 0xE0012000, Host Adapter SCSI ID: 7
scsi0: Parity Checking: Enabled, Extended Translation: Enabled
scsi0: Synchronous Negotiation: Ultra, Wide Negotiation: Enabled
scsi0: Disconnect/Reconnect: Enabled, Tagged Queuing: Enabled
scsi0: Scatter/Gather Limit: 128 of 8192 segments, Mailboxes: 211
scsi0: Driver Queue Depth: 211, Host Adapter Queue Depth: 192
scsi0: Tagged Queue Depth: Automatic, Untagged Queue Depth: 3
scsi0: SCSI Bus Termination: Both Enabled, SCAM: Disabled
scsi0: *** BusLogic BT-958 Initialized Successfully ***
scsi host0: BusLogic BT-958
Also diagnostic output such as with the BusLogic=TraceConfiguration
parameter is affected and becomes vertical and therefore hard to read.
This has now been corrected, e.g.:
pci 0000:00:13.0: PCI->APIC IRQ transform: INT A -> IRQ 17
blogic_cmd(86) Status = 30: 4 ==> 4: FF 05 93 00
blogic_cmd(95) Status = 28: (Modify I/O Address)
blogic_cmd(91) Status = 30: 1 ==> 1: 01
blogic_cmd(04) Status = 30: 4 ==> 4: 41 41 35 30
blogic_cmd(8D) Status = 30: 14 ==> 14: 45 DC 00 20 00 00 00 00 00 40 30 37 42 1D
scsi: ***** BusLogic SCSI Driver Version 2.1.17 of 12 September 2013 *****
scsi: Copyright 1995-1998 by Leonard N. Zubkoff <lnz@dandelion.com>
blogic_cmd(04) Status = 30: 4 ==> 4: 41 41 35 30
blogic_cmd(0B) Status = 30: 3 ==> 3: 00 08 07
blogic_cmd(0D) Status = 30: 34 ==> 34: 03 01 07 04 00 00 00 00 00 00 00 00 00 00 00 00 FF 42 44 46 FF 00 00 00 00 00 00 00 00 00 FF 00 FF 00
blogic_cmd(8D) Status = 30: 14 ==> 14: 45 DC 00 20 00 00 00 00 00 40 30 37 42 1D
blogic_cmd(84) Status = 30: 1 ==> 1: 37
blogic_cmd(8B) Status = 30: 5 ==> 5: 39 35 38 20 20
blogic_cmd(85) Status = 30: 1 ==> 1: 42
blogic_cmd(86) Status = 30: 4 ==> 4: FF 05 93 00
blogic_cmd(91) Status = 30: 64 ==> 64: 41 46 3E 20 39 35 38 20 20 00 C4 00 04 01 07 2F 07 04 35 FF FF FF FF FF FF FF FF FF FF 01 00 FE FF 08 FF FF 00 00 00 00 00 00 00 01 00 01 00 00 FF FF 00 00 00 00 00 00 00 00 00 00 00 00 00 FC
scsi0: Configuring BusLogic Model BT-958 PCI Wide Ultra SCSI Host Adapter
etc.
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2104201940430.44318@angie.orcam.me.uk
Fixes: 4bcc595ccd80 ("printk: reinstate KERN_CONT for printing continuation lines")
Cc: stable@vger.kernel.org # v4.9+
Acked-by: Khalid Aziz <khalid@gonehiking.org>
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit e79c0e324b011b0288cd411a5b53870a7730f163 ]
abs() returns signed long, which could not convert the type
as unsigned, and it may cause a mismatch type warning from
static tools. To fix it, this patch uses an variable to save
the abs()'s result and does a explicit conversion.
Signed-off-by: Guojia Liao <liaoguojia@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a39ff4a47f3e1da3b036817ef436b1a9be10783a ]
It will cause null-ptr-deref if platform_get_resource() returns NULL,
we need check the return value.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7c48662b9d56666219f526a71ace8c15e6e12f1f ]
The problem is that gpio_free() can sleep and the cfg_soc() can be
called with spinlocks held. One problematic call tree is:
--> ath_reset_internal() takes &sc->sc_pcu_lock spin lock
--> ath9k_hw_reset()
--> ath9k_hw_gpio_request_in()
--> ath9k_hw_gpio_request()
--> ath9k_hw_gpio_cfg_soc()
Remove gpio_free(), use error message instead, so we should make sure
there is no GPIO conflict.
Also remove ath9k_hw_gpio_free() from ath9k_hw_apply_gpio_override(),
as gpio_mask will never be set for SOC chips.
Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1628481916-15030-1-git-send-email-miaoqing@codeaurora.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 23151b9ae79e3bc4f6a0c4cd3a7f355f68dad128 ]
Bad header can have large length field which can cause OOB.
cptr is the last bytes for read, and the eeprom is parsed
from high to low address. The OOB, triggered by the condition
length > cptr could cause memory error with a read on
negative index.
There are some sanity check around length, but it is not
compared with cptr (the remaining bytes). Here, the
corrupted/bad EEPROM can cause panic.
I was able to reproduce the crash, but I cannot find the
log and the reproducer now. After I applied the patch, the
bug is no longer reproducible.
Signed-off-by: Zekun Shen <bruceshenzk@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/YM3xKsQJ0Hw2hjrc@Zekuns-MBP-16.fios-router.home
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8678fd31f2d3eb14f2b8b39c9bc266f16fa24b22 ]
When receiving a beacon or probe response, we should update the
boottime_ns field which is the timestamp the frame was received at.
(cf mac80211.h)
This fixes a scanning issue with Android since it relies on this
timestamp to determine when the AP has been seen for the last time
(via the nl80211 BSS_LAST_SEEN_BOOTTIME parameter).
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1629992768-23785-1-git-send-email-loic.poulain@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0be883a0d795d9146f5325de582584147dd0dcdc ]
The check for count appears to be incorrect since a non-zero count
check occurs a couple of statements earlier. Currently the check is
always false and the dev->port->irq != PARPORT_IRQ_NONE part of the
check is never tested and the if statement is dead-code. Fix this
by removing the check on count.
Note that this code is pre-git history, so I can't find a sha for
it.
Acked-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Addresses-Coverity: ("Logically dead code")
Link: https://lore.kernel.org/r/20210730100710.27405-1-colin.king@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ec449ed8230cd30769de3cb70ee0fce293047372 ]
Under high stress, SW steering might get stuck on polling for completion
that never comes.
For such cases QP needs to have protocol retransmission mechanism enabled.
Currently the retransmission timeout is defined as 0 (unlimited). Fix this
by defining a real timeout.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Alex Vesker <valex@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6cc64770fb386b10a64a1fe09328396de7bb5262 ]
In line 849 (#1), "mlx5dr_htbl_put(cur_htbl);" drops the reference to
cur_htbl and may cause cur_htbl to be freed.
However, cur_htbl is subsequently used in the next line, which may result
in an use-after-free bug.
Fix this by calling mlx5dr_err() before the cur_htbl is put.
Signed-off-by: Wentao_Liang <Wentao_Liang_g@163.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 090f1be3abf3069ef856b29761f181808bf55917 ]
The iwl_mvm_scan_ch_n_aps_flag() is called with a variable
before the value of the variable is set. Fix it.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210826224715.f6f188980a5e.Ie7331a8b94004d308f6cbde44e519155a5be91dd@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e6344c060209ef4e970cac18adeac1676a2a73cd ]
In commit 79f033f6f229 ("iwlwifi: dbg: don't limit dump decisions
to all or monitor") we changed the code to pass around a bitmap,
but in the monitor_only case, one place accidentally used the bit
number, not the bit mask, resulting in CSR and FW_INFO getting
dumped instead of monitor data. Fix that.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210805141826.774fd8729a33.Ic985a787071d1c0b127ef0ba8367da896ee11f57@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6c608cd6962ebdf84fd3de6d42f88ed64d2f4e1b ]
BSS elements are protected using RCU, so we need to use
RCU properly to access them, fix that.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210805130823.fd8b5791ab44.Iba26800a6301078d3782fb249c476dd8ac2bf3c6@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c6ce1c74ef2923b8ffd85f7f8b486f804f343b39 ]
When TVQM is enabled (iwl_mvm_has_new_tx_api() is true), then
queue numbers are just sequentially assigned 0, 1, 2, ...
Prior to TVQM, in DQA, there were some statically allocated
queue numbers:
* IWL_MVM_DQA_AUX_QUEUE == 1,
* both IWL_MVM_DQA_INJECT_MONITOR_QUEUE and
IWL_MVM_DQA_P2P_DEVICE_QUEUE == 2, and
* IWL_MVM_DQA_AP_PROBE_RESP_QUEUE == 9.
Now, these values are assigned to the members mvm->aux_queue,
mvm->snif_queue, mvm->probe_queue and mvm->p2p_dev_queue by
default. Normally, this doesn't really matter, and if TVQM is
in fact available we override them to the real values after
allocating a queue for use there.
However, this allocation doesn't always happen. For example,
for mvm->p2p_dev_queue (== 2) it only happens when the P2P
Device interface is started, if any. If it's not started, the
value in mvm->p2p_dev_queue remains 2. This wouldn't really
matter all that much if it weren't for iwl_mvm_is_static_queue()
which checks a queue number against one of those four static
numbers.
Now, if no P2P Device or monitor interface is added then queue
2 may be dynamically allocated, yet alias mvm->p2p_dev_queue or
mvm->snif_queue, and thus iwl_mvm_is_static_queue() erroneously
returns true for it. If it then gets full, all interface queues
are stopped, instead of just backpressuring against the one TXQ
that's really the only affected one.
This clearly can lead to issues, as everything is stopped even
if just a single TXQ filled its corresponding HW queue, if it
happens to have an appropriate number (2 or 9, AUX is always
reassigned.) Due to a mac80211 bug, this also led to a situation
in which the queues remained stopped across a deauthentication
and then attempts to connect to a new AP started failing, but
that's fixed separately.
Fix all of this by simply initializing the queue numbers to
the invalid value until they're used, if TVQM is enabled, and
also setting them back to that value when the queues are later
freed again.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210802172232.2e47e623f9e2.I9b0830dafbb68ef35b7b8f0f46160abec02ac7d0@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0f5d44ac6e55551798dd3da0ff847c8df5990822 ]
If beacon_inject_active is true, we will return without freeing
beacon. Fid that by freeing it before returning.
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
[reworded the commit message]
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210802172232.d16206ca60fc.I9984a9b442c84814c307cee3213044e24d26f38a@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6ac5720086c8b176794eb74c5cc09f8b79017f38 ]
When switching op-modes, or more generally when reconfiguring,
we might switch the RB size. In _iwl_pcie_rx_init() we have a
comment saying we must free all RBs since we might switch the
size, but this is actually too late: the switch has been done
and we'll free the buffers with the wrong size.
Fix this by always freeing the buffers, if any, at the start
of configure, instead of only after the size may have changed.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210802170640.42d7c93279c4.I07f74e65aab0e3d965a81206fcb289dc92d74878@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1ec06c2dee679e9f089e78ed20cb74ee90155f61 ]
On systems with multiple SH per SE compute_static_thread_mgmt_se#
is split into independent masks, one for each SH, in the upper and
lower 16 bits. We need to detect this and apply cu masking to each
SH. The cu mask bits are assigned first to each SE, then to
alternate SHs, then finally to higher CU id. This ensures that
the maximum number of SPIs are engaged as early as possible while
balancing CU assignment to each SH.
v2: Use max SH/SE rather than max SH in cu_per_sh.
v3: Fix comment blocks, ensure se_mask is initially zero filled,
and correctly assign se.sh.cu positions to unset bits in cu_mask.
Signed-off-by: Sean Keely <Sean.Keely@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 66cce9e73ec61967ed1f97f30cee79bd9a2bb7ee ]
When a remote usb device is attached to the local Virtual USB
Host Controller Root Hub port, the bound device driver may send
a port reset command.
vhci_hcd accepts port resets only when the device doesn't have
port address assigned to it. When reset happens device is in
assigned/used state and vhci_hcd rejects it leaving the port in
a stuck state.
This problem was found when a blue-tooth or xbox wireless dongle
was passed through using usbip.
A few drivers reset the port during probe including mt76 driver
specific to this bug report. Fix the problem with a change to
honor reset requests when device is in used state (VDEV_ST_USED).
Reported-and-tested-by: Michael <msbroadf@gmail.com>
Suggested-by: Michael <msbroadf@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20210819225937.41037-1-skhan@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 258c81b341c8025d79073ce2d6ce19dcdc7d10d2 ]
In vhci_device_unlink_cleanup(), the URBs for unsent unlink requests are
not given back. This sometimes causes usb_kill_urb to wait indefinitely
for that urb to be given back. syzbot has reported a hung task issue [1]
for this.
To fix this, give back the urbs corresponding to unsent unlink requests
(unlink_tx list) similar to how urbs corresponding to unanswered unlink
requests (unlink_rx list) are given back.
[1]: https://syzkaller.appspot.com/bug?id=08f12df95ae7da69814e64eb5515d5a85ed06b76
Reported-by: syzbot+74d6ef051d3d2eacf428@syzkaller.appspotmail.com
Tested-by: syzbot+74d6ef051d3d2eacf428@syzkaller.appspotmail.com
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Anirudh Rayabharam <mail@anirudhrb.com>
Link: https://lore.kernel.org/r/20210820190122.16379-2-mail@anirudhrb.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7c75bde329d7e2a93cf86a5c15c61f96f1446cdc ]
If IRQ occurs between calling dsps_setup_optional_vbus_irq()
and dsps_create_musb_pdev(), then null pointer dereference occurs
since glue->musb wasn't initialized yet.
The patch puts initializing of neccesery data before registration
of the interrupt handler.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Nadezda Lutovinova <lutovinova@ispras.ru>
Link: https://lore.kernel.org/r/20210819163323.17714-1-lutovinova@ispras.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
quirk set"
[ Upstream commit 2847c46c61486fd8bca9136a6e27177212e78c69 ]
This reverts commit 5d5323a6f3625f101dbfa94ba3ef7706cce38760.
That commit effectively disabled Intel host initiated U1/U2 lpm for devices
with periodic endpoints.
Before that commit we disabled host initiated U1/U2 lpm if the exit latency
was larger than any periodic endpoint service interval, this is according
to xhci spec xhci 1.1 specification section 4.23.5.2
After that commit we incorrectly checked that service interval was smaller
than U1/U2 inactivity timeout. This is not relevant, and can't happen for
Intel hosts as previously set U1/U2 timeout = 105% * service interval.
Patch claimed it solved cases where devices can't be enumerated because of
bandwidth issues. This might be true but it's a side effect of accidentally
turning off lpm.
exit latency calculations have been revised since then
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20210820123503.2605901-5-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e72a55f2e5ddcfb3dce0701caf925ce435b87682 ]
When a read/write command is sent via ioctl to the kernel,
and the command fails, the actual error response of the emmc
is not sent to the user.
IOCTL read/write tests are carried out using commands
17 (Single BLock Read), 24 (Single Block Write),
18 (Multi Block Read), 25 (Multi Block Write)
The tests are carried out on a 64Gb emmc device. All of these
tests try to access an "out of range" sector address (0x09B2FFFF).
It is seen that without the patch the response received by the user
is not OUT_OF_RANGE error (R1 response 31st bit is not set) as per
JEDEC specification. After applying the patch proper response is seen.
This is because the function returns without copying the response to
the user in case of failure. This patch fixes the issue.
Hence, this memcpy is required whether we get an error response or not.
Therefor it is moved up from the current position up to immediately
after we have called mmc_wait_for_req().
The test code and the output of only the CMD17 is included in the
commit to limit the message length.
CMD17 (Test Code Snippet):
==========================
printf("Forming CMD%d\n", opt_idx);
/* single block read */
cmd.blksz = 512;
cmd.blocks = 1;
cmd.write_flag = 0;
cmd.opcode = 17;
//cmd.arg = atoi(argv[3]);
cmd.arg = 0x09B2FFFF;
/* Expecting response R1B */
cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_ADTC;
memset(data, 0, sizeof(__u8) * 512);
mmc_ioc_cmd_set_data(cmd, data);
printf("Sending CMD%d: ARG[0x%08x]\n", opt_idx, cmd.arg);
if(ioctl(fd, MMC_IOC_CMD, &cmd))
perror("Error");
printf("\nResponse: %08x\n", cmd.response[0]);
CMD17 (Output without patch):
=============================
test@test-LIVA-Z:~$ sudo ./mmc cmd_test /dev/mmcblk0 17
Entering the do_mmc_commands:Device: /dev/mmcblk0 nargs:4
Entering the do_mmc_commands:Device: /dev/mmcblk0 options[17, 0x09B2FFF]
Forming CMD17
Sending CMD17: ARG[0x09b2ffff]
Error: Connection timed out
Response: 00000000
(Incorrect response)
CMD17 (Output with patch):
==========================
test@test-LIVA-Z:~$ sudo ./mmc cmd_test /dev/mmcblk0 17
[sudo] password for test:
Entering the do_mmc_commands:Device: /dev/mmcblk0 nargs:4
Entering the do_mmc_commands:Device: /dev/mmcblk0 options[17, 09B2FFFF]
Forming CMD17
Sending CMD17: ARG[0x09b2ffff]
Error: Connection timed out
Response: 80000900
(Correct OUT_OF_ERROR response as per JEDEC specification)
Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com>
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Link: https://lore.kernel.org/r/20210824191726.8296-1-nishadkamdar@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3ac5e45291f3f0d699a721357380d4593bc2dcb3 ]
For unexplained reasons, the prescaler register for this device needs to
be cleared (set to 1) while performing a data read or else the command
will hang. This does not appear to affect the real clock rate sent out
on the bus, so I assume it's purely to work around a hardware bug.
During normal operation, the prescaler is already set to 1, so nothing
needs to be done. However, in "initial mode" (which is used for sub-MHz
clock speeds, like the core sets while enumerating cards), it's set to
128 and so we need to reset it during data reads. We currently fail to
do this for long reads.
This has no functional affect on the driver's operation currently
written, as the MMC core always sets a clock above 1MHz before
attempting any long reads. However, the core could conceivably set any
clock speed at any time and the driver should still work, so I think
this fix is worthwhile.
I personally encountered this issue while performing data recovery on an
external chip. My connections had poor signal integrity, so I modified
the core code to reduce the clock speed. Without this change, I saw the
card enumerate but was unable to actually read any data.
Writes don't seem to work in the situation described above even with
this change (and even if the workaround is extended to encompass data
write commands). I was not able to find a way to get them working.
Signed-off-by: Thomas Hebb <tommyhebb@gmail.com>
Link: https://lore.kernel.org/r/2fef280d8409ab0100c26c6ac7050227defd098d.1627818365.git.tommyhebb@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 66bad6ed2204fdb78a0a8fb89d824397106a5471 ]
At a couple of places, the return values of the non-void functions were
not getting checked. This was reported by the coverity tool. Modify the
code to check the return values of the same.
Addresses-Coverity: ("check_return")
Signed-off-by: Manish Narani <manish.narani@xilinx.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/1623753837-21035-5-git-send-email-manish.narani@xilinx.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c0b4e411a9b09748466ee06d2ae6772effa64dfb ]
SD standard speed timing was met only at 19MHz and not 25 MHz, that's
why changing driver to 19MHz. The reason for this is when a level shifter
is used on the board, timing was met for standard speed only at 19MHz.
Since this level shifter is commonly required for high speed modes,
the driver is modified to use standard speed of 19Mhz.
Signed-off-by: Manish Narani <manish.narani@xilinx.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/1623753837-21035-2-git-send-email-manish.narani@xilinx.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
