| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
commit de0a01f5296651d3a539f2d23d0db8f359483696 upstream.
Enable PCIe reference clock. There is no remove function that's why
this should be enough for simple operation.
Normally this clock is enabled by default by firmware but there are
usecases where this clock should be enabled by driver itself.
It is also good that PCIe clock is recorded in a clock framework.
Link: https://lore.kernel.org/r/ee6997a08fab582b1c6de05f8be184f3fe8d5357.1624618100.git.michal.simek@xilinx.com
Fixes: ab597d35ef11 ("PCI: xilinx-nwl: Add support for Xilinx NWL PCIe Host Controller")
Signed-off-by: Hyun Kwon <hyun.kwon@xilinx.com>
Signed-off-by: Bharat Kumar Gogada <bharat.kumar.gogada@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a8bd29bd49c4156ea0ec5a97812333e2aeef44e7 upstream.
The pciconfig_read() syscall reads PCI configuration space using
hardware-dependent config accessors.
If the read fails on PCI, most accessors don't return an error; they
pretend the read was successful and got ~0 data from the device, so the
syscall returns success with ~0 data in the buffer.
When the accessor does return an error, pciconfig_read() normally fills the
user's buffer with ~0 and returns an error in errno. But after
e4585da22ad0 ("pci syscall.c: Switch to refcounting API"), we don't fill
the buffer with ~0 for the EPERM "user lacks CAP_SYS_ADMIN" error.
Userspace may rely on the ~0 data to detect errors, but after e4585da22ad0,
that would not detect CAP_SYS_ADMIN errors.
Restore the original behaviour of filling the buffer with ~0 when the
CAP_SYS_ADMIN check fails.
[bhelgaas: commit log, fold in Nathan's fix
https://lore.kernel.org/r/20210803200836.500658-1-nathan@kernel.org]
Fixes: e4585da22ad0 ("pci syscall.c: Switch to refcounting API")
Link: https://lore.kernel.org/r/20210729233755.1509616-1-kw@linux.com
Signed-off-by: Krzysztof Wilczyński <kw@linux.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b12d93e9958e028856cbcb061b6e64728ca07755 upstream.
The ASMedia ASM1062 SATA controller advertises Max_Payload_Size_Supported
of 512, but in fact it cannot handle incoming TLPs with payload size of
512.
We discovered this issue on PCIe controllers capable of MPS = 512 (Aardvark
and DesignWare), where the issue presents itself as an External Abort.
Bjorn Helgaas says:
Probably ASM1062 reports a Malformed TLP error when it receives a data
payload of 512 bytes, and Aardvark, DesignWare, etc convert this to an
arm64 External Abort. [1]
To avoid this problem, limit the ASM1062 Max Payload Size Supported to 256
bytes, so we set the Max Payload Size of devices that may send TLPs to the
ASM1062 to 256 or less.
[1] https://lore.kernel.org/linux-pci/20210601170907.GA1949035@bjorn-Precision-5520/
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=212695
Link: https://lore.kernel.org/r/20210624171418.27194-2-kabel@kernel.org
Reported-by: Rötti <espressobinboardarmbiantempmailaddress@posteo.de>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Krzysztof Wilczyński <kw@linux.com>
Reviewed-by: Pali Rohár <pali@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 00823dcbdd415c868390feaca16f0265101efab4 upstream.
Previously we assumed that all Root Ports and Switch Downstream Ports
supported Link Bandwidth Notification. Per spec, this is only required
for Ports supporting Links wider than x1 and/or multiple Link speeds
(PCIe r5.0, sec 7.5.3.6).
Because we assumed all Ports supported it, we tried to set up a Bandwidth
Notification IRQ, which failed for devices that don't support IRQs at all,
which meant pcieport didn't attach to the Port at all.
Check the Link Bandwidth Notification Capability bit and enable the service
only when the Port supports it.
[bhelgaas: commit log]
Fixes: e8303bb7a75c ("PCI/LINK: Report degraded links via link bandwidth notification")
Link: https://lore.kernel.org/r/20210512213314.7778-1-stuart.w.hayes@gmail.com
Signed-off-by: Stuart Hayes <stuart.w.hayes@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8a6430ab9c9c87cb64c512e505e8690bbaee190b upstream.
Commit ca6bfcb2f6d9 ("libata: Enable queued TRIM for Samsung SSD 860")
limited the existing ATA_HORKAGE_NO_NCQ_TRIM quirk from "Samsung SSD 8*",
covering all Samsung 800 series SSDs, to only apply to "Samsung SSD 840*"
and "Samsung SSD 850*" series based on information from Samsung.
But there is a large number of users which is still reporting issues
with the Samsung 860 and 870 SSDs combined with Intel, ASmedia or
Marvell SATA controllers and all reporters also report these problems
going away when disabling queued trims.
Note that with AMD SATA controllers users are reporting even worse
issues and only completely disabling NCQ helps there, this will be
addressed in a separate patch.
Fixes: ca6bfcb2f6d9 ("libata: Enable queued TRIM for Samsung SSD 860")
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=203475
Cc: stable@vger.kernel.org
Cc: Kate Hsuan <hpa@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20210823095220.30157-1-hdegoede@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e555a03b112838883fdd8185d613c35d043732f2 upstream.
Since sdma_transfer_init() will do sdma_load_context before any
sdma transfer, no need once more in sdma_config_channel().
Fixes: ad0d92d7ba6a ("dmaengine: imx-sdma: refine to load context only once")
Cc: <stable@vger.kernel.org>
Signed-off-by: Robin Gong <yibin.gong@nxp.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Tested-by: Richard Leitner <richard.leitner@skidata.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8592f02464d52776c5cfae4627c6413b0ae7602d upstream.
This reverts commit ad0d92d7ba6aecbe2705907c38ff8d8be4da1e9c, because
in spi-imx case, burst length may be changed dynamically.
Fixes: ad0d92d7ba6a ("dmaengine: imx-sdma: refine to load context only once")
Cc: <stable@vger.kernel.org>
Signed-off-by: Robin Gong <yibin.gong@nxp.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Tested-by: Richard Leitner <richard.leitner@skidata.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1c1dc8bda3a05c60877a6649775894db5343bdea upstream.
When the ESTABLISH ccw does not complete within the specified timeout,
try our best to cancel the ccw program that is still active on the
device. Otherwise the IO subsystem might be accessing it even after
the driver eg. called qdio_free().
Fixes: 779e6e1c724d ("[S390] qdio: new qdio driver.")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Cc: <stable@vger.kernel.org> # 2.6.27
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2c197870e4701610ec3b1143808d4e31152caf30 upstream.
When qdio_establish() times out while waiting for the ESTABLISH ccw to
complete, it calls qdio_shutdown() to roll back all of its previous
actions. But at this point the qdio_irq's state is still
QDIO_IRQ_STATE_INACTIVE, so qdio_shutdown() will exit immediately
without doing any actual work.
Which means that eg. the qdio_irq's thinint-indicator stays registered,
and cdev->handler isn't restored to its old value. And since
commit 954d6235be41 ("s390/qdio: make thinint registration symmetric")
the qdio_irq also stays on the tiq_list, so on the next qdio_establish()
we might get a helpful BUG from the list-debugging code:
...
[ 4633.512591] list_add double add: new=00000000005a4110, prev=00000001b357db78, next=00000000005a4110.
[ 4633.512621] ------------[ cut here ]------------
[ 4633.512623] kernel BUG at lib/list_debug.c:29!
...
[ 4633.512796] [<00000001b2c6ee9a>] __list_add_valid+0x82/0xa0
[ 4633.512798] ([<00000001b2c6ee96>] __list_add_valid+0x7e/0xa0)
[ 4633.512800] [<00000001b2fcecce>] qdio_establish_thinint+0x116/0x190
[ 4633.512805] [<00000001b2fcbe58>] qdio_establish+0x128/0x498
...
Fix this by extracting a goto-chain from the existing error exits in
qdio_establish(), and check the return value of the wait_event_...()
to detect the timeout condition.
Fixes: 779e6e1c724d ("[S390] qdio: new qdio driver.")
Root-caused-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Cc: <stable@vger.kernel.org> # 2.6.27
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6b7f554be8c92319d7e6df92fd247ebb9beb4a45 upstream.
The LIRC_SET_TRANSMITTER_MASK ioctl should return the number of emitters
if an invalid list was set.
Cc: stable@vger.kernel.org
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1a10d7fdb6d0e235e9d230916244cc2769d3f170 upstream.
As warned by smatch:
drivers/media/usb/uvc/uvc_v4l2.c:911 uvc_ioctl_g_input() error: doing dma on the stack (&i)
drivers/media/usb/uvc/uvc_v4l2.c:943 uvc_ioctl_s_input() error: doing dma on the stack (&i)
those two functions call uvc_query_ctrl passing a pointer to
a data at the DMA stack. those are used to send URBs via
usb_control_msg(). Using DMA stack is not supported and should
not work anymore on modern Linux versions.
So, use a kmalloc'ed buffer.
Cc: stable@vger.kernel.org # Kernel 4.9 and upper
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a30dc6cf0dc51419021550152e435736aaef8799 upstream.
I got a NULL pointer dereference report when doing fuzz test:
Call Trace:
qp_release_pages+0xae/0x130
qp_host_unregister_user_memory.isra.25+0x2d/0x80
vmci_qp_broker_unmap+0x191/0x320
? vmci_host_do_alloc_queuepair.isra.9+0x1c0/0x1c0
vmci_host_unlocked_ioctl+0x59f/0xd50
? do_vfs_ioctl+0x14b/0xa10
? tomoyo_file_ioctl+0x28/0x30
? vmci_host_do_alloc_queuepair.isra.9+0x1c0/0x1c0
__x64_sys_ioctl+0xea/0x120
do_syscall_64+0x34/0xb0
entry_SYSCALL_64_after_hwframe+0x44/0xae
When a queue pair is created by the following call, it will not
register the user memory if the page_store is NULL, and the
entry->state will be set to VMCIQPB_CREATED_NO_MEM.
vmci_host_unlocked_ioctl
vmci_host_do_alloc_queuepair
vmci_qp_broker_alloc
qp_broker_alloc
qp_broker_create // set entry->state = VMCIQPB_CREATED_NO_MEM;
When unmapping this queue pair, qp_host_unregister_user_memory() will
be called to unregister the non-existent user memory, which will
result in a null pointer reference. It will also change
VMCIQPB_CREATED_NO_MEM to VMCIQPB_CREATED_MEM, which should not be
present in this operation.
Only when the qp broker has mem, it can unregister the user
memory when unmapping the qp broker.
Only when the qp broker has no mem, it can register the user
memory when mapping the qp broker.
Fixes: 06164d2b72aa ("VMCI: queue pairs implementation.")
Cc: stable <stable@vger.kernel.org>
Reported-by: Hulk Robot <hulkci@huawei.com>
Reviewed-by: Jorgen Hansen <jhansen@vmware.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Link: https://lore.kernel.org/r/20210818124845.488312-1-wanghai38@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5441a07a127f106c9936e4f9fa1a8a93e3f31828 upstream.
The commit 97f9ac3db6612 ("crypto: ccp - Add support for SEV-ES to the
PSP driver") added support to allocate Trusted Memory Region (TMR)
used during the SEV-ES firmware initialization. The TMR gets locked
during the firmware initialization and unlocked during the shutdown.
While the TMR is locked, access to it is disallowed.
Currently, the CCP driver does not shutdown the firmware during the
kexec reboot, leaving the TMR memory locked.
Register a callback to shutdown the SEV firmware on the kexec boot.
Fixes: 97f9ac3db6612 ("crypto: ccp - Add support for SEV-ES to the PSP driver")
Reported-by: Lucas Nussbaum <lucas.nussbaum@inria.fr>
Tested-by: Lucas Nussbaum <lucas.nussbaum@inria.fr>
Cc: <stable@kernel.org>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Acked-by: Tom Lendacky <thomas.lendacky@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 528b16bfc3ae5f11638e71b3b63a81f9999df727 upstream.
On systems with many cores using dm-crypt, heavy spinlock contention in
percpu_counter_compare() can be observed when the page allocation limit
for a given device is reached or close to be reached. This is due
to percpu_counter_compare() taking a spinlock to compute an exact
result on potentially many CPUs at the same time.
Switch to non-exact comparison of allocated and allowed pages by using
the value returned by percpu_counter_read_positive() to avoid taking
the percpu_counter spinlock.
This may over/under estimate the actual number of allocated pages by at
most (batch-1) * num_online_cpus().
Currently, batch is bounded by 32. The system on which this issue was
first observed has 256 CPUs and 512GB of RAM. With a 4k page size, this
change may over/under estimate by 31MB. With ~10G (2%) allowed dm-crypt
allocations, this seems an acceptable error. Certainly preferred over
running into the spinlock contention.
This behavior was reproduced on an EC2 c5.24xlarge instance with 96 CPUs
and 192GB RAM as follows, but can be provoked on systems with less CPUs
as well.
* Disable swap
* Tune vm settings to promote regular writeback
$ echo 50 > /proc/sys/vm/dirty_expire_centisecs
$ echo 25 > /proc/sys/vm/dirty_writeback_centisecs
$ echo $((128 * 1024 * 1024)) > /proc/sys/vm/dirty_background_bytes
* Create 8 dmcrypt devices based on files on a tmpfs
* Create and mount an ext4 filesystem on each crypt devices
* Run stress-ng --hdd 8 within one of above filesystems
Total %system usage collected from sysstat goes to ~35%. Write throughput
on the underlying loop device is ~2GB/s. perf profiling an individual
kworker kcryptd thread shows the following profile, indicating spinlock
contention in percpu_counter_compare():
99.98% 0.00% kworker/u193:46 [kernel.kallsyms] [k] ret_from_fork
|
--ret_from_fork
kthread
worker_thread
|
--99.92%--process_one_work
|
|--80.52%--kcryptd_crypt
| |
| |--62.58%--mempool_alloc
| | |
| | --62.24%--crypt_page_alloc
| | |
| | --61.51%--__percpu_counter_compare
| | |
| | --61.34%--__percpu_counter_sum
| | |
| | |--58.68%--_raw_spin_lock_irqsave
| | | |
| | | --58.30%--native_queued_spin_lock_slowpath
| | |
| | --0.69%--cpumask_next
| | |
| | --0.51%--_find_next_bit
| |
| |--10.61%--crypt_convert
| | |
| | |--6.05%--xts_crypt
...
After applying this patch and running the same test, %system usage is
lowered to ~7% and write throughput on the loop device increases
to ~2.7GB/s. perf report shows mempool_alloc() as ~8% rather than ~62%
in the profile and not hitting the percpu_counter() spinlock anymore.
|--8.15%--mempool_alloc
| |
| |--3.93%--crypt_page_alloc
| | |
| | --3.75%--__alloc_pages
| | |
| | --3.62%--get_page_from_freelist
| | |
| | --3.22%--rmqueue_bulk
| | |
| | --2.59%--_raw_spin_lock
| | |
| | --2.57%--native_queued_spin_lock_slowpath
| |
| --3.05%--_raw_spin_lock_irqsave
| |
| --2.49%--native_queued_spin_lock_slowpath
Suggested-by: DJ Gregor <dj@corelight.com>
Reviewed-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Arne Welzel <arne.welzel@corelight.com>
Fixes: 5059353df86e ("dm crypt: limit the number of allocated pages")
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 54784ffa5b267f57161eb8fbb811499f22a0a0bf upstream.
Reading status register can fail in the interrupt handler. In such
case, the regmap_read() will not store anything useful under passed
'val' variable and random stack value will be used to determine type of
interrupt.
Handle the regmap_read() failure to avoid handling interrupt type and
triggering changed power supply event based on random stack value.
Fixes: 39e7213edc4f ("max17042_battery: Support regmap to access device's registers")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d195d7aac09bddabc2c8326fb02fcec2b0a2de02 upstream.
If the operating channel is the first in the scan list, it was seen that
a finish scan request would be sent before a start scan request was
sent, causing the firmware to fail all future scans. Track the current
channel being scanned to avoid requesting the scan finish before it
starts.
Cc: <stable@vger.kernel.org>
Fixes: 5973a2947430 ("wcn36xx: Fix software-driven scan")
Signed-off-by: Joseph Gates <jgates@squareup.com>
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1629286303-13179-1-git-send-email-loic.poulain@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b76d26d69ecc97ebb24aaf40427a13c808a4f488 upstream.
There is no reason to assume that the IRQ rising edge (indicating that
the device start up phase is done) will happen after we request the IRQ.
If the device is already up by the time we request it, the call to
'wait_for_completion_timeout()' will timeout and we will fail the device
probe even though there's nothing wrong.
Fix it by just polling the status register until we get the indication that
the device is up and running. As a side effect of this fix, requesting the
IRQ is also moved to after the setup function.
Fixes: f110f3188e563 ("iio: temperature: Add support for LTC2983")
Reported-and-tested-by: Drew Fustini <drew@pdp7.com>
Reviewed-by: Drew Fustini <drew@pdp7.com>
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: <Stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210811133220.190264-2-nuno.sa@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8b07e990fb254fcbaa919616ac77f981cb48c73d upstream.
The check mixes pages (vm_pgoff) with bytes (vm_start, vm_end) on one
side of the comparison, and uses resource address (rather than just the
resource size) on the other side of the comparison.
This can allow malicious userspace to easily bypass the boundary check and
map pages that are located outside memory-region reserved by the driver.
Fixes: 01c60dcea9f7 ("drivers/misc: Add Aspeed P2A control driver")
Cc: stable@vger.kernel.org
Signed-off-by: Iwona Winiarska <iwona.winiarska@intel.com>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Tested-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Joel Stanley <joel@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b49a0e69a7b1a68c8d3f64097d06dabb770fec96 upstream.
The check mixes pages (vm_pgoff) with bytes (vm_start, vm_end) on one
side of the comparison, and uses resource address (rather than just the
resource size) on the other side of the comparison.
This can allow malicious userspace to easily bypass the boundary check and
map pages that are located outside memory-region reserved by the driver.
Fixes: 6c4e97678501 ("drivers/misc: Add Aspeed LPC control driver")
Cc: stable@vger.kernel.org
Signed-off-by: Iwona Winiarska <iwona.winiarska@intel.com>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Tested-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Joel Stanley <joel@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a89f355e469dcda129c2522be4fdba00c1c74c83 upstream.
In "qmp_cooling_devices_register", the count value is initially
QMP_NUM_COOLING_RESOURCES, which is 2. Based on the initial count value,
the memory for cooling_devs is allocated. Then while calling the
"qmp_cooling_device_add" function, count value is post-incremented for
each child node.
This makes the out of bound access to the cooling_dev array. Fix it by
passing the QMP_NUM_COOLING_RESOURCES definition to devm_kzalloc() and
initializing the count to 0.
While at it, let's also free the memory allocated to cooling_dev if no
cooling device is found in DT and during unroll phase.
Cc: stable@vger.kernel.org # 5.4
Fixes: 05589b30b21a ("soc: qcom: Extend AOSS QMP driver to support resources that are used to wake up the SoC.")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20210629153249.73428-1-manivannan.sadhasivam@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d5e931403942b3af39212960c2592b5ba741b2bf upstream.
Fix the pull up/down info for both the JZ4760 and JZ4770 SoCs, as the
previous values sometimes contradicted what's written in the programming
manual.
Fixes: b5c23aa46537 ("pinctrl: add a pinctrl driver for the Ingenic jz47xx SoCs")
Cc: <stable@vger.kernel.org> # v4.12
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Tested-by: 周琰杰 (Zhou Yanjie)<zhouyanjie@wanyeetech.com>
Link: https://lore.kernel.org/r/20210717174836.14776-1-paul@crapouillou.net
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1b73e588f47397dee6e4bdfd953e0306c60b5fe5 upstream.
Casting a small array of u8 to an unsigned long is *never* OK:
- it does funny thing when the array size is less than that of a long,
as it accesses random places in the stack
- it makes everything even more fun with a BE kernel
Fix this by building the unsigned long used as a bitmap byte by byte,
in a way that works across endianess and has no undefined behaviours.
An extra BUILD_BUG_ON() catches the unlikely case where the array
would be larger than a single unsigned long.
Fixes: 1490d9f841b1 ("pinctrl: Add STMFX GPIO expander Pinctrl/GPIO driver")
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
Cc: Amelie Delaunay <amelie.delaunay@foss.st.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Link: https://lore.kernel.org/r/20210725180830.250218-1-maz@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d17929eb1066d1c1653aae9bb4396a9f1d6602ac upstream.
Add the bypass register for the s2f_user0_clk.
Fixes: 80c6b7a0894f ("clk: socfpga: agilex: add clock driver for the Agilex platform")
Cc: stable@vger.kernel.org
Signed-off-by: Kris Chaplin <kris.chaplin@intel.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Link: https://lore.kernel.org/r/20210713144621.605140-3-dinguyen@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f817c132db679d492d96c60993fa2f2c67ab18d0 upstream.
Correct the s2f_user0_mux clock representation.
Fixes: 80c6b7a0894f ("clk: socfpga: agilex: add clock driver for the Agilex platform")
Cc: stable@vger.kernel.org
Signed-off-by: Kris Chaplin <kris.chaplin@intel.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Link: https://lore.kernel.org/r/20210713144621.605140-2-dinguyen@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 9d563236cca43fc4fe190b3be173444bd48e2a3b upstream.
The psi_ref_clk comes from the C2 node of the main_pll and periph_pll,
not the C3.
Fixes: 80c6b7a0894f ("clk: socfpga: agilex: add clock driver for the Agilex platform")
Cc: stable@vger.kernel.org
Signed-off-by: Kris Chaplin <kris.chaplin@intel.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Link: https://lore.kernel.org/r/20210713144621.605140-1-dinguyen@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1a519dc7a73c977547d8b5108d98c6e769c89f4b upstream.
When running as Xen PV guest, masking MSI-X is a responsibility of the
hypervisor. The guest has no write access to the relevant BAR at all - when
it tries to, it results in a crash like this:
BUG: unable to handle page fault for address: ffffc9004069100c
#PF: supervisor write access in kernel mode
#PF: error_code(0x0003) - permissions violation
RIP: e030:__pci_enable_msix_range.part.0+0x26b/0x5f0
e1000e_set_interrupt_capability+0xbf/0xd0 [e1000e]
e1000_probe+0x41f/0xdb0 [e1000e]
local_pci_probe+0x42/0x80
(...)
The recently introduced function msix_mask_all() does not check the global
variable pci_msi_ignore_mask which is set by XEN PV to bypass the masking
of MSI[-X] interrupts.
Add the check to make this function XEN PV compatible.
Fixes: 7d5ec3d36123 ("PCI/MSI: Mask all unused MSI-X entries")
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210826170342.135172-1-marmarek@invisiblethingslab.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8d448fa0a8bb1c8d94eef7647edffe9ac81a281e upstream.
The TPS65910 RTC driver module doesn't auto-load because of the wrong
module alias that doesn't match the device name, fix it.
Cc: stable@vger.kernel.org
Reported-by: Anton Bambura <jenneron@protonmail.com>
Tested-by: Anton Bambura <jenneron@protonmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210808160030.8556-1-digetx@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This reverts commit 4b21d4e820bb9a1415ec76dfe565e4c5937337dd which is
commit b1a811633f7321cf1ae2bb76a66805b7720e44c9 upstream.
The backport of this is reported to be causing some problems, so revert
this for now until they are worked out.
Link: https://lore.kernel.org/r/CACPK8XfUWoOHr-0RwRoYoskia4fbAbZ7DYf5wWBnv6qUnGq18w@mail.gmail.com
Reported-by: Joel Stanley <joel@jms.id.au>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Pavel Skripkin <paskripkin@gmail.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit aaedb9e00e5400220a8871180d23a83e67f29f63 upstream.
Since a few kernel releases the Pogoplug 4 has crashed like this
during boot:
Unable to handle kernel NULL pointer dereference at virtual address 00000002
(...)
[<c04116ec>] (strlen) from [<c00ead80>] (kstrdup+0x1c/0x4c)
[<c00ead80>] (kstrdup) from [<c04591d8>] (__clk_register+0x44/0x37c)
[<c04591d8>] (__clk_register) from [<c04595ec>] (clk_hw_register+0x20/0x44)
[<c04595ec>] (clk_hw_register) from [<c045bfa8>] (__clk_hw_register_mux+0x198/0x1e4)
[<c045bfa8>] (__clk_hw_register_mux) from [<c045c050>] (clk_register_mux_table+0x5c/0x6c)
[<c045c050>] (clk_register_mux_table) from [<c0acf3e0>] (kirkwood_clk_muxing_setup.constprop.0+0x13c/0x1ac)
[<c0acf3e0>] (kirkwood_clk_muxing_setup.constprop.0) from [<c0aceae0>] (of_clk_init+0x12c/0x214)
[<c0aceae0>] (of_clk_init) from [<c0ab576c>] (time_init+0x20/0x2c)
[<c0ab576c>] (time_init) from [<c0ab3d18>] (start_kernel+0x3dc/0x56c)
[<c0ab3d18>] (start_kernel) from [<00000000>] (0x0)
Code: e3130020 1afffffb e12fff1e c08a1078 (e5d03000)
This is because the "powersave" mux clock 0 was provided in an unterminated
array, which is required by the loop in the driver:
/* Count, allocate, and register clock muxes */
for (n = 0; desc[n].name;)
n++;
Here n will go out of bounds and then call clk_register_mux() on random
memory contents after the mux clock.
Fix this by terminating the array with a blank entry.
Fixes: 105299381d87 ("cpufreq: kirkwood: use the powersave multiplexer")
Cc: stable@vger.kernel.org
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Chris Packham <chris.packham@alliedtelesis.co.nz>
Cc: Gregory CLEMENT <gregory.clement@bootlin.com>
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20210814235514.403426-1-linus.walleij@linaro.org
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 79fad92f2e596f5a8dd085788a24f540263ef887 upstream.
Currently there are (at least) two problems in the way pwm_bl starts
managing the enable_gpio pin. Both occur when the backlight is initially
off and the driver finds the pin not already in output mode and, as a
result, unconditionally switches it to output-mode and asserts the signal.
Problem 1: This could cause the backlight to flicker since, at this stage
in driver initialisation, we have no idea what the PWM and regulator are
doing (an unconfigured PWM could easily "rest" at 100% duty cycle).
Problem 2: This will cause us not to correctly honour the
post_pwm_on_delay (which also risks flickers).
Fix this by moving the code to configure the GPIO output mode until after
we have examines the handover state. That allows us to initialize
enable_gpio to off if the backlight is currently off and on if the
backlight is on.
Cc: stable@vger.kernel.org
Reported-by: Marek Vasut <marex@denx.de>
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Acked-by: Marek Vasut <marex@denx.de>
Tested-by: Marek Vasut <marex@denx.de>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8c28051cdcbe9dfcec6bd0a4709d67a09df6edae upstream.
syzbot is reporting page fault at vga16fb_fillrect() [1], for
vga16fb_check_var() is failing to detect multiplication overflow.
if (vxres * vyres > maxmem) {
vyres = maxmem / vxres;
if (vyres < yres)
return -ENOMEM;
}
Since no module would accept too huge resolutions where multiplication
overflow happens, let's reject in the common path.
Link: https://syzkaller.appspot.com/bug?extid=04168c8063cfdde1db5e [1]
Reported-by: syzbot <syzbot+04168c8063cfdde1db5e@syzkaller.appspotmail.com>
Debugged-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/185175d6-227a-7b55-433d-b070929b262c@i-love.sakura.ne.jp
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit bb2853a6a421a052268eee00fd5d3f6b3504b2b1 upstream.
The ops->receive_buf() may be accessed concurrently from these two
functions. If the driver flushes data to the line discipline
receive_buf() method while tiocsti() is waiting for the
ops->receive_buf() to finish its work, the data race will happen.
For example:
tty_ioctl |tty_ldisc_receive_buf
->tioctsi | ->tty_port_default_receive_buf
| ->tty_ldisc_receive_buf
->hci_uart_tty_receive | ->hci_uart_tty_receive
->h4_recv | ->h4_recv
In this case, the h4 receive buffer will be overwritten by the
latecomer, and we will lost the data.
Hence, change tioctsi() function to use the exclusive lock interface
from tty_buffer to avoid the data race.
Reported-by: syzbot+97388eb9d31b997fe1d0@syzkaller.appspotmail.com
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: Nguyen Dinh Phi <phind.uet@gmail.com>
Link: https://lore.kernel.org/r/20210823000641.2082292-1-phind.uet@gmail.com
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2f32c147a3816d789722c0bd242a9431332ec3ed upstream.
The Samsung Galaxy Book Flex2 Alpha uses an ax201 with the ID a0f0/6074.
This works fine with the existing driver once it knows to claim it.
Simple patch to add the device.
Signed-off-by: Justin M. Forbes <jforbes@fedoraproject.org>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210702223155.1981510-1-jforbes@fedoraproject.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 1e4428b6dba9b683dc2ec0a56ed7879de3200cce ]
With current config, for packets with IPv4 checksum errors,
errorcode is being set to UNKNOWN. Hence added a separate
errorcodes for outer and inner IPv4 checksum and changed
NPC configuration accordingly.
Also turn on L2 multicast address check in NPC protocol check block.
Fixes: 6b3321bacc5a ("octeontx2-af: Enable packet length and csum validation")
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 698a82ebfb4b2f2014baf31b7324b328a2a6366e ]
This patch fixes the static code analyzer reported issues
in rvu_npc.c. The reported errors are different sizes of
operands in bitops and returning uninitialized values.
Fixes: 651cd2652339 ("octeontx2-af: MCAM entry installation support")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6537e96d743b89294b397b4865c6c061abae31b0 ]
When the given counter does not belong to the entry
then code ends up in infinite loop because the loop
cursor, entry is not getting updated further. This
patch fixes that by updating entry for every iteration.
Fixes: a958dd59f9ce ("octeontx2-af: Map or unmap NPC MCAM entry and counter")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 429205da6c834447a57279af128bdd56ccd5225e ]
Based on tests the QCA7000 doesn't support checksum offloading. So assume
ip_summed is CHECKSUM_NONE and let the kernel take care of the checksum
handling. This fixes data transfer issues in noisy environments.
Reported-by: Michael Heimpold <michael.heimpold@in-tech.com>
Fixes: 291ab06ecf67 ("net: qualcomm: new Ethernet over SPI driver for QCA7000")
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d745ca4f2c4ae9f1bd8cf7d8ac6e22d739bffd19 ]
When resuming from suspend, brcmf_pcie_pm_leave_D3 will first attempt a
hot resume and then fall back to removing the PCI device and then
reprobing. If this probe fails, the kernel will oops, because brcmf_err,
which is called to report the failure will dereference the stale bus
pointer. Open code and use the default bus-less brcmf_err to avoid this.
Fixes: 8602e62441ab ("brcmfmac: pass bus to the __brcmf_err() in pcie.c")
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210817063521.22450-1-a.fatoum@pengutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b63aed3ff195130fef12e0af590f4838cf0201d8 ]
kmemleak reported that dev_name() of internally-handled cores were leaked
on driver unbinding. Let's use device_initialize() to take refcounts for
them and put_device() to properly free the related stuff.
While looking at it, there's another potential issue for those which should
be *registered* into driver core. If device_register() failed, we put
device once and freed bcma_device structures. In bcma_unregister_cores(),
they're treated as unregistered and we hit both UAF and double-free. That
smells not good and has also been fixed now.
Fixes: ab54bc8460b5 ("bcma: fill core details for every device")
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210727025232.663-2-yuzenghui@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 57f780f1c43362b86fd23d20bd940e2468237716 ]
Driver crashes when restoring from the Hibernate. In the resume flow,
driver need to clean up the older nic/vec objects and re-initialize them.
Fixes: 8aaa112a57c1d ("net: atlantic: refactoring pm logic")
Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit fd6729ec534cffbbeb3917761e6d1fe6a412d3fe ]
This error path is unlikely because of it checked for NULL and
returned -ENOMEM earlier in the function. But it should return
an error code here as well if we ever do hit it because of a
race condition or something.
Fixes: bdcd81707973 ("Add ath6kl cleaned up driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210813113438.GB30697@kili
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b357d9717be7f95fde2c6c4650b186a995b71e59 ]
commit 3ba7f53f8bf1 ("ice: don't remove netdev->dev_addr from uc sync
list") introduced calls to netif_addr_lock_bh() and
netif_addr_unlock_bh() in the driver's ndo_set_mac() callback. This is
fine since the driver is updated the netdev's dev_addr, but since this
is a spinlock, the driver cannot sleep when the lock is held.
Unfortunately the functions to add/delete MAC filters depend on a mutex.
This was causing a trace with the lock debug kernel config options
enabled when changing the mac address via iproute.
[ 203.273059] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:281
[ 203.273065] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 6698, name: ip
[ 203.273068] Preemption disabled at:
[ 203.273068] [<ffffffffc04aaeab>] ice_set_mac_address+0x8b/0x1c0 [ice]
[ 203.273097] CPU: 31 PID: 6698 Comm: ip Tainted: G S W I 5.14.0-rc4 #2
[ 203.273100] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0010.010620200716 01/06/2020
[ 203.273102] Call Trace:
[ 203.273107] dump_stack_lvl+0x33/0x42
[ 203.273113] ? ice_set_mac_address+0x8b/0x1c0 [ice]
[ 203.273124] ___might_sleep.cold.150+0xda/0xea
[ 203.273131] mutex_lock+0x1c/0x40
[ 203.273136] ice_remove_mac+0xe3/0x180 [ice]
[ 203.273155] ? ice_fltr_add_mac_list+0x20/0x20 [ice]
[ 203.273175] ice_fltr_prepare_mac+0x43/0xa0 [ice]
[ 203.273194] ice_set_mac_address+0xab/0x1c0 [ice]
[ 203.273206] dev_set_mac_address+ |
