summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2021-12-29hwmon: (lm90) Add basic support for TI TMP461Guenter Roeck2-16/+40
[ Upstream commit f8344f7693a25d9025a59d164450b50c6f5aa3c0 ] TMP461 is almost identical to TMP451 and was actually detected as TMP451 with the existing lm90 driver if its I2C address is 0x4c. Add support for it to the lm90 driver. At the same time, improve the chip detection function to at least try to distinguish between TMP451 and TMP461. As a side effect, this fixes commit 24333ac26d01 ("hwmon: (tmp401) use smb word operations instead of 2 smb byte operations"). TMP461 does not support word operations on temperature registers, which causes bad temperature readings with the tmp401 driver. The lm90 driver does not perform word operations on temperature registers and thus does not have this problem. Support is listed as basic because TMP461 supports a sensor resolution of 0.0625 degrees C, while the lm90 driver assumes a resolution of 0.125 degrees C. Also, the TMP461 supports negative temperatures with its default temperature range, which is not the case for similar chips supported by the lm90 and the tmp401 drivers. Those limitations will be addressed with follow-up patches. Fixes: 24333ac26d01 ("hwmon: (tmp401) use smb word operations instead of 2 smb byte operations") Reported-by: David T. Wilson <david.wilson@nasa.gov> Cc: David T. Wilson <david.wilson@nasa.gov> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-29hwmon: (lm90) Fix usage of CONFIG2 register in detect functionGuenter Roeck1-3/+2
[ Upstream commit fce15c45d3fbd9fc1feaaf3210d8e3f8b33dfd3a ] The detect function had a comment "Make compiler happy" when id did not read the second configuration register. As it turns out, the code was checking the contents of this register for manufacturer ID 0xA1 (NXP Semiconductor/Philips), but never actually read the register. So it wasn't surprising that the compiler complained, and it indeed had a point. Fix the code to read the register contents for manufacturer ID 0xa1. At the same time, the code was reading the register for manufacturer ID 0x41 (Analog Devices), but it was not using the results. In effect it was just checking if reading the register returned an error. That doesn't really add much if any value, so stop doing that. Fixes: f90be42fb383 ("hwmon: (lm90) Refactor reading of config2 register") Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-29pinctrl: bcm2835: Change init order for gpio hogsPhil Elwell1-13/+16
[ Upstream commit 266423e60ea1b953fcc0cd97f3dad85857e434d1 ] ...and gpio-ranges pinctrl-bcm2835 is a combined pinctrl/gpio driver. Currently the gpio side is registered first, but this breaks gpio hogs (which are configured during gpiochip_add_data). Part of the hog initialisation is a call to pinctrl_gpio_request, and since the pinctrl driver hasn't yet been registered this results in an -EPROBE_DEFER from which it can never recover. Change the initialisation sequence to register the pinctrl driver first. This also solves a similar problem with the gpio-ranges property, which is required in order for released pins to be returned to inputs. Fixes: 73345a18d464b ("pinctrl: bcm2835: Pass irqchip when adding gpiochip") Signed-off-by: Phil Elwell <phil@raspberrypi.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20211206092237.4105895-2-phil@raspberrypi.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-29Input: elantech - fix stack out of bound access in elantech_change_report_id()Andrea Righi1-1/+7
[ Upstream commit 1d72d9f960ccf1052a0630a68c3d358791dbdaaa ] The array param[] in elantech_change_report_id() must be at least 3 bytes, because elantech_read_reg_params() is calling ps2_command() with PSMOUSE_CMD_GETINFO, that is going to access 3 bytes from param[], but it's defined in the stack as an array of 2 bytes, therefore we have a potential stack out-of-bounds access here, also confirmed by KASAN: [ 6.512374] BUG: KASAN: stack-out-of-bounds in __ps2_command+0x372/0x7e0 [ 6.512397] Read of size 1 at addr ffff8881024d77c2 by task kworker/2:1/118 [ 6.512416] CPU: 2 PID: 118 Comm: kworker/2:1 Not tainted 5.13.0-22-generic #22+arighi20211110 [ 6.512428] Hardware name: LENOVO 20T8000QGE/20T8000QGE, BIOS R1AET32W (1.08 ) 08/14/2020 [ 6.512436] Workqueue: events_long serio_handle_event [ 6.512453] Call Trace: [ 6.512462] show_stack+0x52/0x58 [ 6.512474] dump_stack+0xa1/0xd3 [ 6.512487] print_address_description.constprop.0+0x1d/0x140 [ 6.512502] ? __ps2_command+0x372/0x7e0 [ 6.512516] __kasan_report.cold+0x7d/0x112 [ 6.512527] ? _raw_write_lock_irq+0x20/0xd0 [ 6.512539] ? __ps2_command+0x372/0x7e0 [ 6.512552] kasan_report+0x3c/0x50 [ 6.512564] __asan_load1+0x6a/0x70 [ 6.512575] __ps2_command+0x372/0x7e0 [ 6.512589] ? ps2_drain+0x240/0x240 [ 6.512601] ? dev_printk_emit+0xa2/0xd3 [ 6.512612] ? dev_vprintk_emit+0xc5/0xc5 [ 6.512621] ? __kasan_check_write+0x14/0x20 [ 6.512634] ? mutex_lock+0x8f/0xe0 [ 6.512643] ? __mutex_lock_slowpath+0x20/0x20 [ 6.512655] ps2_command+0x52/0x90 [ 6.512670] elantech_ps2_command+0x4f/0xc0 [psmouse] [ 6.512734] elantech_change_report_id+0x1e6/0x256 [psmouse] [ 6.512799] ? elantech_report_trackpoint.constprop.0.cold+0xd/0xd [psmouse] [ 6.512863] ? ps2_command+0x7f/0x90 [ 6.512877] elantech_query_info.cold+0x6bd/0x9ed [psmouse] [ 6.512943] ? elantech_setup_ps2+0x460/0x460 [psmouse] [ 6.513005] ? psmouse_reset+0x69/0xb0 [psmouse] [ 6.513064] ? psmouse_attr_set_helper+0x2a0/0x2a0 [psmouse] [ 6.513122] ? phys_pmd_init+0x30e/0x521 [ 6.513137] elantech_init+0x8a/0x200 [psmouse] [ 6.513200] ? elantech_init_ps2+0xf0/0xf0 [psmouse] [ 6.513249] ? elantech_query_info+0x440/0x440 [psmouse] [ 6.513296] ? synaptics_send_cmd+0x60/0x60 [psmouse] [ 6.513342] ? elantech_query_info+0x440/0x440 [psmouse] [ 6.513388] ? psmouse_try_protocol+0x11e/0x170 [psmouse] [ 6.513432] psmouse_extensions+0x65d/0x6e0 [psmouse] [ 6.513476] ? psmouse_try_protocol+0x170/0x170 [psmouse] [ 6.513519] ? mutex_unlock+0x22/0x40 [ 6.513526] ? ps2_command+0x7f/0x90 [ 6.513536] ? psmouse_probe+0xa3/0xf0 [psmouse] [ 6.513580] psmouse_switch_protocol+0x27d/0x2e0 [psmouse] [ 6.513624] psmouse_connect+0x272/0x530 [psmouse] [ 6.513669] serio_driver_probe+0x55/0x70 [ 6.513679] really_probe+0x190/0x720 [ 6.513689] driver_probe_device+0x160/0x1f0 [ 6.513697] device_driver_attach+0x119/0x130 [ 6.513705] ? device_driver_attach+0x130/0x130 [ 6.513713] __driver_attach+0xe7/0x1a0 [ 6.513720] ? device_driver_attach+0x130/0x130 [ 6.513728] bus_for_each_dev+0xfb/0x150 [ 6.513738] ? subsys_dev_iter_exit+0x10/0x10 [ 6.513748] ? _raw_write_unlock_bh+0x30/0x30 [ 6.513757] driver_attach+0x2d/0x40 [ 6.513764] serio_handle_event+0x199/0x3d0 [ 6.513775] process_one_work+0x471/0x740 [ 6.513785] worker_thread+0x2d2/0x790 [ 6.513794] ? process_one_work+0x740/0x740 [ 6.513802] kthread+0x1b4/0x1e0 [ 6.513809] ? set_kthread_struct+0x80/0x80 [ 6.513816] ret_from_fork+0x22/0x30 [ 6.513832] The buggy address belongs to the page: [ 6.513838] page:00000000bc35e189 refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1024d7 [ 6.513847] flags: 0x17ffffc0000000(node=0|zone=2|lastcpupid=0x1fffff) [ 6.513860] raw: 0017ffffc0000000 dead000000000100 dead000000000122 0000000000000000 [ 6.513867] raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 [ 6.513872] page dumped because: kasan: bad access detected [ 6.513879] addr ffff8881024d77c2 is located in stack of task kworker/2:1/118 at offset 34 in frame: [ 6.513887] elantech_change_report_id+0x0/0x256 [psmouse] [ 6.513941] this frame has 1 object: [ 6.513947] [32, 34) 'param' [ 6.513956] Memory state around the buggy address: [ 6.513962] ffff8881024d7680: f2 f2 f2 f2 f2 00 00 f3 f3 00 00 00 00 00 00 00 [ 6.513969] ffff8881024d7700: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 6.513976] >ffff8881024d7780: 00 00 00 00 f1 f1 f1 f1 02 f3 f3 f3 00 00 00 00 [ 6.513982] ^ [ 6.513988] ffff8881024d7800: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 6.513995] ffff8881024d7880: 00 f1 f1 f1 f1 03 f2 03 f2 03 f3 f3 f3 00 00 00 [ 6.514000] ================================================================== Define param[] in elantech_change_report_id() as an array of 3 bytes to prevent the out-of-bounds access in the stack. Fixes: e4c9062717fe ("Input: elantech - fix protocol errors for some trackpoints in SMBus mode") BugLink: https://bugs.launchpad.net/bugs/1945590 Signed-off-by: Andrea Righi <andrea.righi@canonical.com> Reviewed-by: Wolfram Sang <wsa@kernel.org> Link: https://lore.kernel.org/r/20211116095559.24395-1-andrea.righi@canonical.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-29sfc: falcon: Check null pointer of rx_queue->page_ringJiasheng Jiang1-1/+4
[ Upstream commit 9b8bdd1eb5890aeeab7391dddcf8bd51f7b07216 ] Because of the possible failure of the kcalloc, it should be better to set rx_queue->page_ptr_mask to 0 when it happens in order to maintain the consistency. Fixes: 5a6681e22c14 ("sfc: separate out SFC4000 ("Falcon") support into new sfc-falcon driver") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Acked-by: Martin Habets <habetsm.xilinx@gmail.com> Link: https://lore.kernel.org/r/20211220140344.978408-1-jiasheng@iscas.ac.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-29sfc: Check null pointer of rx_queue->page_ringJiasheng Jiang1-1/+4
[ Upstream commit bdf1b5c3884f6a0dc91b0dbdb8c3b7d205f449e0 ] Because of the possible failure of the kcalloc, it should be better to set rx_queue->page_ptr_mask to 0 when it happens in order to maintain the consistency. Fixes: 5a6681e22c14 ("sfc: separate out SFC4000 ("Falcon") support into new sfc-falcon driver") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Acked-by: Martin Habets <habetsm.xilinx@gmail.com> Link: https://lore.kernel.org/r/20211220135603.954944-1-jiasheng@iscas.ac.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-29net: ks8851: Check for error irqJiasheng Jiang1-0/+2
[ Upstream commit 99d7fbb5cedf598f67e8be106d6c7b8d91366aef ] Because platform_get_irq() could fail and return error irq. Therefore, it might be better to check it if order to avoid the use of error irq. Fixes: 797047f875b5 ("net: ks8851: Implement Parallel bus operations") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-29drivers: net: smc911x: Check for error irqJiasheng Jiang1-0/+5
[ Upstream commit cb93b3e11d405f20a405a07482d01147ef4934a3 ] Because platform_get_irq() could fail and return error irq. Therefore, it might be better to check it if order to avoid the use of error irq. Fixes: ae150435b59e ("smsc: Move the SMC (SMSC) drivers") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-29fjes: Check for error irqJiasheng Jiang1-0/+5
[ Upstream commit db6d6afe382de5a65d6ccf51253ab48b8e8336c3 ] I find that platform_get_irq() will not always succeed. It will return error irq in case of the failure. Therefore, it might be better to check it if order to avoid the use of error irq. Fixes: 658d439b2292 ("fjes: Introduce FUJITSU Extended Socket Network Device driver") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-29bonding: fix ad_actor_system option setting to defaultFernando Fernandez Mancera1-1/+1
[ Upstream commit 1c15b05baea71a5ff98235783e3e4ad227760876 ] When 802.3ad bond mode is configured the ad_actor_system option is set to "00:00:00:00:00:00". But when trying to set the all-zeroes MAC as actors' system address it was failing with EINVAL. An all-zeroes ethernet address is valid, only multicast addresses are not valid values. Fixes: 171a42c38c6e ("bonding: add netlink support for sys prio, actor sys mac, and port key") Signed-off-by: Fernando Fernandez Mancera <ffmancera@riseup.net> Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com> Link: https://lore.kernel.org/r/20211221111345.2462-1-ffmancera@riseup.net Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-29ipmi: Fix UAF when uninstall ipmi_si and ipmi_msghandler moduleWu Bo1-1/+1
[ Upstream commit ffb76a86f8096a8206be03b14adda6092e18e275 ] Hi, When testing install and uninstall of ipmi_si.ko and ipmi_msghandler.ko, the system crashed. The log as follows: [ 141.087026] BUG: unable to handle kernel paging request at ffffffffc09b3a5a [ 141.087241] PGD 8fe4c0d067 P4D 8fe4c0d067 PUD 8fe4c0f067 PMD 103ad89067 PTE 0 [ 141.087464] Oops: 0010 [#1] SMP NOPTI [ 141.087580] CPU: 67 PID: 668 Comm: kworker/67:1 Kdump: loaded Not tainted 4.18.0.x86_64 #47 [ 141.088009] Workqueue: events 0xffffffffc09b3a40 [ 141.088009] RIP: 0010:0xffffffffc09b3a5a [ 141.088009] Code: Bad RIP value. [ 141.088009] RSP: 0018:ffffb9094e2c3e88 EFLAGS: 00010246 [ 141.088009] RAX: 0000000000000000 RBX: ffff9abfdb1f04a0 RCX: 0000000000000000 [ 141.088009] RDX: 0000000000000000 RSI: 0000000000000246 RDI: 0000000000000246 [ 141.088009] RBP: 0000000000000000 R08: ffff9abfffee3cb8 R09: 00000000000002e1 [ 141.088009] R10: ffffb9094cb73d90 R11: 00000000000f4240 R12: ffff9abfffee8700 [ 141.088009] R13: 0000000000000000 R14: ffff9abfdb1f04a0 R15: ffff9abfdb1f04a8 [ 141.088009] FS: 0000000000000000(0000) GS:ffff9abfffec0000(0000) knlGS:0000000000000000 [ 141.088009] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 141.088009] CR2: ffffffffc09b3a30 CR3: 0000008fe4c0a001 CR4: 00000000007606e0 [ 141.088009] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 141.088009] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 141.088009] PKRU: 55555554 [ 141.088009] Call Trace: [ 141.088009] ? process_one_work+0x195/0x390 [ 141.088009] ? worker_thread+0x30/0x390 [ 141.088009] ? process_one_work+0x390/0x390 [ 141.088009] ? kthread+0x10d/0x130 [ 141.088009] ? kthread_flush_work_fn+0x10/0x10 [ 141.088009] ? ret_from_fork+0x35/0x40] BUG: unable to handle kernel paging request at ffffffffc0b28a5a [ 200.223240] PGD 97fe00d067 P4D 97fe00d067 PUD 97fe00f067 PMD a580cbf067 PTE 0 [ 200.223464] Oops: 0010 [#1] SMP NOPTI [ 200.223579] CPU: 63 PID: 664 Comm: kworker/63:1 Kdump: loaded Not tainted 4.18.0.x86_64 #46 [ 200.224008] Workqueue: events 0xffffffffc0b28a40 [ 200.224008] RIP: 0010:0xffffffffc0b28a5a [ 200.224008] Code: Bad RIP value. [ 200.224008] RSP: 0018:ffffbf3c8e2a3e88 EFLAGS: 00010246 [ 200.224008] RAX: 0000000000000000 RBX: ffffa0799ad6bca0 RCX: 0000000000000000 [ 200.224008] RDX: 0000000000000000 RSI: 0000000000000246 RDI: 0000000000000246 [ 200.224008] RBP: 0000000000000000 R08: ffff9fe43fde3cb8 R09: 00000000000000d5 [ 200.224008] R10: ffffbf3c8cb53d90 R11: 00000000000f4240 R12: ffff9fe43fde8700 [ 200.224008] R13: 0000000000000000 R14: ffffa0799ad6bca0 R15: ffffa0799ad6bca8 [ 200.224008] FS: 0000000000000000(0000) GS:ffff9fe43fdc0000(0000) knlGS:0000000000000000 [ 200.224008] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 200.224008] CR2: ffffffffc0b28a30 CR3: 00000097fe00a002 CR4: 00000000007606e0 [ 200.224008] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 200.224008] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 200.224008] PKRU: 55555554 [ 200.224008] Call Trace: [ 200.224008] ? process_one_work+0x195/0x390 [ 200.224008] ? worker_thread+0x30/0x390 [ 200.224008] ? process_one_work+0x390/0x390 [ 200.224008] ? kthread+0x10d/0x130 [ 200.224008] ? kthread_flush_work_fn+0x10/0x10 [ 200.224008] ? ret_from_fork+0x35/0x40 [ 200.224008] kernel fault(0x1) notification starting on CPU 63 [ 200.224008] kernel fault(0x1) notification finished on CPU 63 [ 200.224008] CR2: ffffffffc0b28a5a [ 200.224008] ---[ end trace c82a412d93f57412 ]--- The reason is as follows: T1: rmmod ipmi_si. ->ipmi_unregister_smi() -> ipmi_bmc_unregister() -> __ipmi_bmc_unregister() -> kref_put(&bmc->usecount, cleanup_bmc_device); -> schedule_work(&bmc->remove_work); T2: rmmod ipmi_msghandler. ipmi_msghander module uninstalled, and the module space will be freed. T3: bmc->remove_work doing cleanup the bmc resource. -> cleanup_bmc_work() -> platform_device_unregister(&bmc->pdev); -> platform_device_del(pdev); -> device_del(&pdev->dev); -> kobject_uevent(&dev->kobj, KOBJ_REMOVE); -> kobject_uevent_env() -> dev_uevent() -> if (dev->type && dev->type->name) 'dev->type'(bmc_device_type) pointer space has freed when uninstall ipmi_msghander module, 'dev->type->name' cause the system crash. drivers/char/ipmi/ipmi_msghandler.c: 2820 static const struct device_type bmc_device_type = { 2821 .groups = bmc_dev_attr_groups, 2822 }; Steps to reproduce: Add a time delay in cleanup_bmc_work() function, and uninstall ipmi_si and ipmi_msghandler module. 2910 static void cleanup_bmc_work(struct work_struct *work) 2911 { 2912 struct bmc_device *bmc = container_of(work, struct bmc_device, 2913 remove_work); 2914 int id = bmc->pdev.id; /* Unregister overwrites id */ 2915 2916 msleep(3000); <--- 2917 platform_device_unregister(&bmc->pdev); 2918 ida_simple_remove(&ipmi_bmc_ida, id); 2919 } Use 'remove_work_wq' instead of 'system_wq' to solve this issues. Fixes: b2cfd8ab4add ("ipmi: Rework device id and guid handling to catch changing BMCs") Signed-off-by: Wu Bo <wubo40@huawei.com> Message-Id: <1640070034-56671-1-git-send-email-wubo40@huawei.com> Signed-off-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-29igb: fix deadlock caused by taking RTNL in RPM resume pathHeiner Kallweit1-6/+13
[ Upstream commit ac8c58f5b535d6272324e2b8b4a0454781c9147e ] Recent net core changes caused an issue with few Intel drivers (reportedly igb), where taking RTNL in RPM resume path results in a deadlock. See [0] for a bug report. I don't think the core changes are wrong, but taking RTNL in RPM resume path isn't needed. The Intel drivers are the only ones doing this. See [1] for a discussion on the issue. Following patch changes the RPM resume path to not take RTNL. [0] https://bugzilla.kernel.org/show_bug.cgi?id=215129 [1] https://lore.kernel.org/netdev/20211125074949.5f897431@kicinski-fedora-pc1c0hjn.dhcp.thefacebook.com/t/ Fixes: bd869245a3dc ("net: core: try to runtime-resume detached device in __dev_open") Fixes: f32a21376573 ("ethtool: runtime-resume netdev parent before ethtool ioctl ops") Tested-by: Martin Stolpe <martin.stolpe@gmail.com> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20211220201844.2714498-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-29qlcnic: potential dereference null pointer of rx_queue->page_ringJiasheng Jiang3-5/+13
[ Upstream commit 60ec7fcfe76892a1479afab51ff17a4281923156 ] The return value of kcalloc() needs to be checked. To avoid dereference of null pointer in case of the failure of alloc. Therefore, it might be better to change the return type of qlcnic_sriov_alloc_vlans() and return -ENOMEM when alloc fails and return 0 the others. Also, qlcnic_sriov_set_guest_vlan_mode() and __qlcnic_pci_sriov_enable() should deal with the return value of qlcnic_sriov_alloc_vlans(). Fixes: 154d0c810c53 ("qlcnic: VLAN enhancement for 84XX adapters") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-29net: marvell: prestera: fix incorrect return of port_findYevhen Orlov1-6/+10
[ Upstream commit 8b681bd7c301c423fbe97a6b23388a2180ff04ca ] In case, when some ports is in list and we don't find requested - we return last iterator state and not return NULL as expected. Fixes: 501ef3066c89 ("net: marvell: prestera: Add driver for Prestera family ASIC devices") Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Link: https://lore.kernel.org/r/20211216170736.8851-1-yevhen.orlov@plvision.eu Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-29RDMA/hns: Replace kfree() with kvfree()Jiacheng Shi1-1/+1
[ Upstream commit 12d3bbdd6bd2780b71cc466f3fbc6eb7d43bbc2a ] Variables allocated by kvmalloc_array() should not be freed by kfree. Because they may be allocated by vmalloc. So we replace kfree() with kvfree() here. Fixes: 6fd610c5733d ("RDMA/hns: Support 0 hop addressing for SRQ buffer") Link: https://lore.kernel.org/r/20211210094234.5829-1-billsjc@sjtu.edu.cn Signed-off-by: Jiacheng Shi <billsjc@sjtu.edu.cn> Acked-by: Wenpeng Liang <liangwenpeng@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-29IB/qib: Fix memory leak in qib_user_sdma_queue_pkts()José Expósito1-1/+1
[ Upstream commit bee90911e0138c76ee67458ac0d58b38a3190f65 ] The wrong goto label was used for the error case and missed cleanup of the pkt allocation. Fixes: d39bf40e55e6 ("IB/qib: Protect from buffer overflow in struct qib_user_sdma_pkt fields") Link: https://lore.kernel.org/r/20211208175238.29983-1-jose.exposito89@gmail.com Addresses-Coverity-ID: 1493352 ("Resource leak") Signed-off-by: José Expósito <jose.exposito89@gmail.com> Acked-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-29spi: change clk_disable_unprepare to clk_unprepareDongliang Mu1-1/+1
[ Upstream commit db6689b643d8653092f5853751ea2cdbc299f8d3 ] The corresponding API for clk_prepare is clk_unprepare, other than clk_disable_unprepare. Fix this by changing clk_disable_unprepare to clk_unprepare. Fixes: 5762ab71eb24 ("spi: Add support for Armada 3700 SPI Controller") Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com> Link: https://lore.kernel.org/r/20211206101931.2816597-1-mudongliangabcd@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-29HID: potential dereference of null pointerJiasheng Jiang1-0/+3
commit 13251ce1dd9bb525da2becb9b26fdfb94ca58659 upstream. The return value of devm_kzalloc() needs to be checked. To avoid hdev->dev->driver_data to be null in case of the failure of alloc. Fixes: 14c9c014babe ("HID: add vivaldi HID driver") Cc: stable@vger.kernel.org Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Link: https://lore.kernel.org/r/20211215083605.117638-1-jiasheng@iscas.ac.cn Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-29HID: holtek: fix mouse probingBenjamin Tissoires1-0/+15
commit 93a2207c254ca102ebbdae47b00f19bbfbfa7ecd upstream. An overlook from the previous commit: we don't even parse or start the device, meaning that the device is not presented to user space. Fixes: 93020953d0fa ("HID: check for valid USB device for many HID drivers") Cc: stable@vger.kernel.org Link: https://bugs.archlinux.org/task/73048 Link: https://bugzilla.kernel.org/show_bug.cgi?id=215341 Link: https://lore.kernel.org/r/e4efbf13-bd8d-0370-629b-6c80c0044b15@leemhuis.info/ Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-29net: usb: lan78xx: add Allied Telesis AT29M2-AFGreg Jesionowski1-0/+6
commit ef8a0f6eab1ca5d1a75c242c5c7b9d386735fa0a upstream. This adds the vendor and product IDs for the AT29M2-AF which is a lan7801-based device. Signed-off-by: Greg Jesionowski <jesionowskigreg@gmail.com> Link: https://lore.kernel.org/r/20211214221027.305784-1-jesionowskigreg@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-22xen/netback: don't queue unlimited number of packagesJuergen Gross1-7/+11
commit be81992f9086b230623ae3ebbc85ecee4d00a3d3 upstream. In case a guest isn't consuming incoming network traffic as fast as it is coming in, xen-netback is buffering network packages in unlimited numbers today. This can result in host OOM situations. Commit f48da8b14d04ca8 ("xen-netback: fix unlimited guest Rx internal queue and carrier flapping") meant to introduce a mechanism to limit the amount of buffered data by stopping the Tx queue when reaching the data limit, but this doesn't work for cases like UDP. When hitting the limit don't queue further SKBs, but drop them instead. In order to be able to tell Rx packages have been dropped increment the rx_dropped statistics counter in this case. It should be noted that the old solution to continue queueing SKBs had the additional problem of an overflow of the 32-bit rx_queue_len value would result in intermittent Tx queue enabling. This is part of XSA-392 Fixes: f48da8b14d04ca8 ("xen-netback: fix unlimited guest Rx internal queue and carrier flapping") Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-22xen/netback: fix rx queue stall detectionJuergen Gross2-24/+42
commit 6032046ec4b70176d247a71836186d47b25d1684 upstream. Commit 1d5d48523900a4b ("xen-netback: require fewer guest Rx slots when not using GSO") introduced a security problem in netback, as an interface would only be regarded to be stalled if no slot is available in the rx queue ring page. In case the SKB at the head of the queued requests will need more than one rx slot and only one slot is free the stall detection logic will never trigger, as the test for that is only looking for at least one slot to be free. Fix that by testing for the needed number of slots instead of only one slot being available. In order to not have to take the rx queue lock that often, store the number of needed slots in the queue data. As all SKB dequeue operations happen in the rx queue kernel thread this is safe, as long as the number of needed slots is accessed via READ/WRITE_ONCE() only and updates are always done with the rx queue lock held. Add a small helper for obtaining the number of free slots. This is part of XSA-392 Fixes: 1d5d48523900a4b ("xen-netback: require fewer guest Rx slots when not using GSO") Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-22xen/console: harden hvc_xen against event channel stormsJuergen Gross1-3/+27
commit fe415186b43df0db1f17fa3a46275fd92107fe71 upstream. The Xen console driver is still vulnerable for an attack via excessive number of events sent by the backend. Fix that by using a lateeoi event channel. For the normal domU initial console this requires the introduction of bind_evtchn_to_irq_lateeoi() as there is no xenbus device available at the time the event channel is bound to the irq. As the decision whether an interrupt was spurious or not requires to test for bytes having been read from the backend, move sending the event into the if statement, as sending an event without having found any bytes to be read is making no sense at all. This is part of XSA-391 Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-22xen/netfront: harden netfront against event channel stormsJuergen Gross1-31/+94
commit b27d47950e481f292c0a5ad57357edb9d95d03ba upstream. The Xen netfront driver is still vulnerable for an attack via excessive number of events sent by the backend. Fix that by using lateeoi event channels. For being able to detect the case of no rx responses being added while the carrier is down a new lock is needed in order to update and test rsp_cons and the number of seen unconsumed responses atomically. This is part of XSA-391 Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-22xen/blkfront: harden blkfront against event channel stormsJuergen Gross1-3/+12
commit 0fd08a34e8e3b67ec9bd8287ac0facf8374b844a upstream. The Xen blkfront driver is still vulnerable for an attack via excessive number of events sent by the backend. Fix that by using lateeoi event channels. This is part of XSA-391 Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-22bus: ti-sysc: Fix variable set but not used warning for reinit_modulesTony Lindgren1-2/+1
commit 1b1da99b845337362a3dafe0f7b49927ab4ae041 upstream. Fix drivers/bus/ti-sysc.c:2494:13: error: variable 'error' set but not used introduced by commit 9d881361206e ("bus: ti-sysc: Add quirk handling for reinit on context lost"). Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-22scsi: scsi_debug: Sanity check block descriptor length in resp_mode_select()George Kennedy1-2/+2
commit e0a2c28da11e2c2b963fc01d50acbf03045ac732 upstream. In resp_mode_select() sanity check the block descriptor len to avoid UAF. BUG: KASAN: use-after-free in resp_mode_select+0xa4c/0xb40 drivers/scsi/scsi_debug.c:2509 Read of size 1 at addr ffff888026670f50 by task scsicmd/15032 CPU: 1 PID: 15032 Comm: scsicmd Not tainted 5.15.0-01d0625 #15 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Call Trace: <TASK> dump_stack_lvl+0x89/0xb5 lib/dump_stack.c:107 print_address_description.constprop.9+0x28/0x160 mm/kasan/report.c:257 kasan_report.cold.14+0x7d/0x117 mm/kasan/report.c:443 __asan_report_load1_noabort+0x14/0x20 mm/kasan/report_generic.c:306 resp_mode_select+0xa4c/0xb40 drivers/scsi/scsi_debug.c:2509 schedule_resp+0x4af/0x1a10 drivers/scsi/scsi_debug.c:5483 scsi_debug_queuecommand+0x8c9/0x1e70 drivers/scsi/scsi_debug.c:7537 scsi_queue_rq+0x16b4/0x2d10 drivers/scsi/scsi_lib.c:1521 blk_mq_dispatch_rq_list+0xb9b/0x2700 block/blk-mq.c:1640 __blk_mq_sched_dispatch_requests+0x28f/0x590 block/blk-mq-sched.c:325 blk_mq_sched_dispatch_requests+0x105/0x190 block/blk-mq-sched.c:358 __blk_mq_run_hw_queue+0xe5/0x150 block/blk-mq.c:1762 __blk_mq_delay_run_hw_queue+0x4f8/0x5c0 block/blk-mq.c:1839 blk_mq_run_hw_queue+0x18d/0x350 block/blk-mq.c:1891 blk_mq_sched_insert_request+0x3db/0x4e0 block/blk-mq-sched.c:474 blk_execute_rq_nowait+0x16b/0x1c0 block/blk-exec.c:63 sg_common_write.isra.18+0xeb3/0x2000 drivers/scsi/sg.c:837 sg_new_write.isra.19+0x570/0x8c0 drivers/scsi/sg.c:775 sg_ioctl_common+0x14d6/0x2710 drivers/scsi/sg.c:941 sg_ioctl+0xa2/0x180 drivers/scsi/sg.c:1166 __x64_sys_ioctl+0x19d/0x220 fs/ioctl.c:52 do_syscall_64+0x3a/0x80 arch/x86/entry/common.c:50 entry_SYSCALL_64_after_hwframe+0x44/0xae arch/x86/entry/entry_64.S:113 Link: https://lore.kernel.org/r/1637262208-28850-1-git-send-email-george.kennedy@oracle.com Reported-by: syzkaller <syzkaller@googlegroups.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: George Kennedy <george.kennedy@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-22scsi: scsi_debug: Fix type in min_t to avoid stack OOBGeorge Kennedy1-15/+19
commit 36e07d7ede88a1f1ef8f0f209af5b7612324ac2c upstream. Change min_t() to use type "u32" instead of type "int" to avoid stack out of bounds. With min_t() type "int" the values get sign extended and the larger value gets used causing stack out of bounds. BUG: KASAN: stack-out-of-bounds in memcpy include/linux/fortify-string.h:191 [inline] BUG: KASAN: stack-out-of-bounds in sg_copy_buffer+0x1de/0x240 lib/scatterlist.c:976 Read of size 127 at addr ffff888072607128 by task syz-executor.7/18707 CPU: 1 PID: 18707 Comm: syz-executor.7 Not tainted 5.15.0-syzk #1 Hardware name: Red Hat KVM, BIOS 1.13.0-2 Call Trace: __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x89/0xb5 lib/dump_stack.c:106 print_address_description.constprop.9+0x28/0x160 mm/kasan/report.c:256 __kasan_report mm/kasan/report.c:442 [inline] kasan_report.cold.14+0x7d/0x117 mm/kasan/report.c:459 check_region_inline mm/kasan/generic.c:183 [inline] kasan_check_range+0x1a3/0x210 mm/kasan/generic.c:189 memcpy+0x23/0x60 mm/kasan/shadow.c:65 memcpy include/linux/fortify-string.h:191 [inline] sg_copy_buffer+0x1de/0x240 lib/scatterlist.c:976 sg_copy_from_buffer+0x33/0x40 lib/scatterlist.c:1000 fill_from_dev_buffer.part.34+0x82/0x130 drivers/scsi/scsi_debug.c:1162 fill_from_dev_buffer drivers/scsi/scsi_debug.c:1888 [inline] resp_readcap16+0x365/0x3b0 drivers/scsi/scsi_debug.c:1887 schedule_resp+0x4d8/0x1a70 drivers/scsi/scsi_debug.c:5478 scsi_debug_queuecommand+0x8c9/0x1ec0 drivers/scsi/scsi_debug.c:7533 scsi_dispatch_cmd drivers/scsi/scsi_lib.c:1520 [inline] scsi_queue_rq+0x16b0/0x2d40 drivers/scsi/scsi_lib.c:1699 blk_mq_dispatch_rq_list+0xb9b/0x2700 block/blk-mq.c:1639 __blk_mq_sched_dispatch_requests+0x28f/0x590 block/blk-mq-sched.c:325 blk_mq_sched_dispatch_requests+0x105/0x190 block/blk-mq-sched.c:358 __blk_mq_run_hw_queue+0xe5/0x150 block/blk-mq.c:1761 __blk_mq_delay_run_hw_queue+0x4f8/0x5c0 block/blk-mq.c:1838 blk_mq_run_hw_queue+0x18d/0x350 block/blk-mq.c:1891 blk_mq_sched_insert_request+0x3db/0x4e0 block/blk-mq-sched.c:474 blk_execute_rq_nowait+0x16b/0x1c0 block/blk-exec.c:62 sg_common_write.isra.18+0xeb3/0x2000 drivers/scsi/sg.c:836 sg_new_write.isra.19+0x570/0x8c0 drivers/scsi/sg.c:774 sg_ioctl_common+0x14d6/0x2710 drivers/scsi/sg.c:939 sg_ioctl+0xa2/0x180 drivers/scsi/sg.c:1165 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:874 [inline] __se_sys_ioctl fs/ioctl.c:860 [inline] __x64_sys_ioctl+0x19d/0x220 fs/ioctl.c:860 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3a/0x80 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae Link: https://lore.kernel.org/r/1636484247-21254-1-git-send-email-george.kennedy@oracle.com Reported-by: syzkaller <syzkaller@googlegroups.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: George Kennedy <george.kennedy@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-22scsi: scsi_debug: Don't call kcalloc() if size arg is zeroGeorge Kennedy1-0/+4
commit 3344b58b53a76199dae48faa396e9fc37bf86992 upstream. If the size arg to kcalloc() is zero, it returns ZERO_SIZE_PTR. Because of that, for a following NULL pointer check to work on the returned pointer, kcalloc() must not be called with the size arg equal to zero. Return early without error before the kcalloc() call if size arg is zero. BUG: KASAN: null-ptr-deref in memcpy include/linux/fortify-string.h:191 [inline] BUG: KASAN: null-ptr-deref in sg_copy_buffer+0x138/0x240 lib/scatterlist.c:974 Write of size 4 at addr 0000000000000010 by task syz-executor.1/22789 CPU: 1 PID: 22789 Comm: syz-executor.1 Not tainted 5.15.0-syzk #1 Hardware name: Red Hat KVM, BIOS 1.13.0-2 Call Trace: __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x89/0xb5 lib/dump_stack.c:106 __kasan_report mm/kasan/report.c:446 [inline] kasan_report.cold.14+0x112/0x117 mm/kasan/report.c:459 check_region_inline mm/kasan/generic.c:183 [inline] kasan_check_range+0x1a3/0x210 mm/kasan/generic.c:189 memcpy+0x3b/0x60 mm/kasan/shadow.c:66 memcpy include/linux/fortify-string.h:191 [inline] sg_copy_buffer+0x138/0x240 lib/scatterlist.c:974 do_dout_fetch drivers/scsi/scsi_debug.c:2954 [inline] do_dout_fetch drivers/scsi/scsi_debug.c:2946 [inline] resp_verify+0x49e/0x930 drivers/scsi/scsi_debug.c:4276 schedule_resp+0x4d8/0x1a70 drivers/scsi/scsi_debug.c:5478 scsi_debug_queuecommand+0x8c9/0x1ec0 drivers/scsi/scsi_debug.c:7533 scsi_dispatch_cmd drivers/scsi/scsi_lib.c:1520 [inline] scsi_queue_rq+0x16b0/0x2d40 drivers/scsi/scsi_lib.c:1699 blk_mq_dispatch_rq_list+0xb9b/0x2700 block/blk-mq.c:1639 __blk_mq_sched_dispatch_requests+0x28f/0x590 block/blk-mq-sched.c:325 blk_mq_sched_dispatch_requests+0x105/0x190 block/blk-mq-sched.c:358 __blk_mq_run_hw_queue+0xe5/0x150 block/blk-mq.c:1761 __blk_mq_delay_run_hw_queue+0x4f8/0x5c0 block/blk-mq.c:1838 blk_mq_run_hw_queue+0x18d/0x350 block/blk-mq.c:1891 blk_mq_sched_insert_request+0x3db/0x4e0 block/blk-mq-sched.c:474 blk_execute_rq_nowait+0x16b/0x1c0 block/blk-exec.c:62 blk_execute_rq+0xdb/0x360 block/blk-exec.c:102 sg_scsi_ioctl drivers/scsi/scsi_ioctl.c:621 [inline] scsi_ioctl+0x8bb/0x15c0 drivers/scsi/scsi_ioctl.c:930 sg_ioctl_common+0x172d/0x2710 drivers/scsi/sg.c:1112 sg_ioctl+0xa2/0x180 drivers/scsi/sg.c:1165 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:874 [inline] __se_sys_ioctl fs/ioctl.c:860 [inline] __x64_sys_ioctl+0x19d/0x220 fs/ioctl.c:860 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3a/0x80 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae Link: https://lore.kernel.org/r/1636056397-13151-1-git-send-email-george.kennedy@oracle.com Reported-by: syzkaller <syzkaller@googlegroups.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: George Kennedy <george.kennedy@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-22media: mxl111sf: change mutex_init() locationPavel Skripkin1-2/+14
commit 44870a9e7a3c24acbb3f888b2a7cc22c9bdf7e7f upstream. Syzbot reported, that mxl111sf_ctrl_msg() uses uninitialized mutex. The problem was in wrong mutex_init() location. Previous mutex_init(&state->msg_lock) call was in ->init() function, but dvb_usbv2_init() has this order of calls: dvb_usbv2_init() dvb_usbv2_adapter_init() dvb_usbv2_adapter_frontend_init() props->frontend_attach() props->init() Since mxl111sf_* devices call mxl111sf_ctrl_msg() in ->frontend_attach() internally we need to initialize state->msg_lock before frontend_attach(). To achieve it, ->probe() call added to all mxl111sf_* devices, which will simply initiaize mutex. Reported-and-tested-by: syzbot+5ca0bf339f13c4243001@syzkaller.appspotmail.com Fixes: 8572211842af ("[media] mxl111sf: convert to new DVB USB") Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-22Input: touchscreen - avoid bitwise vs logical OR warningNathan Chancellor1-21/+21
commit a02dcde595f7cbd240ccd64de96034ad91cffc40 upstream. A new warning in clang points out a few places in this driver where a bitwise OR is being used with boolean types: drivers/input/touchscreen.c:81:17: warning: use of bitwise '|' with boolean operands [-Wbitwise-instead-of-logical] data_present = touchscreen_get_prop_u32(dev, "touchscreen-min-x", ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ This use of a bitwise OR is intentional, as bitwise operations do not short circuit, which allows all the calls to touchscreen_get_prop_u32() to happen so that the last parameter is initialized while coalescing the results of the calls to make a decision after they are all evaluated. To make this clearer to the compiler, use the '|=' operator to assign the result of each touchscreen_get_prop_u32() call to data_present, which keeps the meaning of the code the same but makes it obvious that every one of these calls is expected to happen. Signed-off-by: Nathan Chancellor <nathan@kernel.org> Reported-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Link: https://lore.kernel.org/r/20211014205757.3474635-1-nathan@kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-22drm/amdgpu: correct register access for RLC_JUMP_TABLE_RESTORELe Ma1-2/+2
commit f3a8076eb28cae1553958c629aecec479394bbe2 upstream. should count on GC IP base address Signed-off-by: Le Ma <le.ma@amd.com> Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-22libata: if T_LENGTH is zero, dma direction should be DMA_NONEGeorge Kennedy1-2/+13
commit 5da5231bb47864e5dd6c6731151e98b6ee498827 upstream. Avoid data corruption by rejecting pass-through commands where T_LENGTH is zero (No data is transferred) and the dma direction is not DMA_NONE. Cc: <stable@vger.kernel.org> Reported-by: syzkaller<syzkaller@googlegroups.com> Signed-off-by: George Kennedy<george.kennedy@oracle.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-22serial: 8250_fintek: Fix garbled text for consoleJi-Ze Hong (Peter Hong)1-20/+0
commit 6c33ff728812aa18792afffaf2c9873b898e7512 upstream. Commit fab8a02b73eb ("serial: 8250_fintek: Enable high speed mode on Fintek F81866") introduced support to use high baudrate with Fintek SuperIO UARTs. It'll change clocksources when the UART probed. But when user add kernel parameter "console=ttyS0,115200 console=tty0" to make the UART as console output, the console will output garbled text after the following kernel message. [ 3.681188] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled The issue is occurs in following step: probe_setup_port() -> fintek_8250_goto_highspeed() It change clocksource from 115200 to 921600 with wrong time, it should change clocksource in set_termios() not in probed. The following 3 patches are implemented change clocksource in fintek_8250_set_termios(). Commit 58178914ae5b ("serial: 8250_fintek: UART dynamic clocksource on Fintek F81216H") Commit 195638b6d44f ("serial: 8250_fintek: UART dynamic clocksource on Fintek F81866") Commit 423d9118c624 ("serial: 8250_fintek: Add F81966 Support") Due to the high baud rate had implemented above 3 patches and the patch Commit fab8a02b73eb ("serial: 8250_fintek: Enable high speed mode on Fintek F81866") is bugged, So this patch will remove it. Fixes: fab8a02b73eb ("serial: 8250_fintek: Enable high speed mode on Fintek F81866") Signed-off-by: Ji-Ze Hong (Peter Hong) <hpeter+linux_kernel@gmail.com> Link: https://lore.kernel.org/r/20211215075835.2072-1-hpeter+linux_kernel@gmail.com Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-22USB: serial: option: add Telit FN990 compositionsDaniele Palmas1-0/+8
commit 2b503c8598d1b232e7fc7526bce9326d92331541 upstream. Add the following Telit FN990 compositions: 0x1070: tty, adb, rmnet, tty, tty, tty, tty 0x1071: tty, adb, mbim, tty, tty, tty, tty 0x1072: rndis, tty, adb, tty, tty, tty, tty 0x1073: tty, adb, ecm, tty, tty, tty, tty Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Link: https://lore.kernel.org/r/20211210100714.22587-1-dnlplm@gmail.com Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-22USB: serial: cp210x: fix CP2105 GPIO registrationJohan Hovold1-2/+4
commit 83b67041f3eaf33f98a075249aa7f4c7617c2f85 upstream. When generalising GPIO support and adding support for CP2102N, the GPIO registration for some CP2105 devices accidentally broke. Specifically, when all the pins of a port are in "modem" mode, and thus unavailable for GPIO use, the GPIO chip would now be registered without having initialised the number of GPIO lines. This would in turn be rejected by gpiolib and some errors messages would be printed (but importantly probe would still succeed). Fix this by initialising the number of GPIO lines before registering the GPIO chip. Note that as for the other device types, and as when all CP2105 pins are muxed for LED function, the GPIO chip is registered also when no pins are available for GPIO use. Reported-by: Maarten Brock <m.brock@vanmierlo.com> Link: https://lore.kernel.org/r/5eb560c81d2ea1a2b4602a92d9f48a89@vanmierlo.com Fixes: c8acfe0aadbe ("USB: serial: cp210x: implement GPIO support for CP2102N") Cc: stable@vger.kernel.org # 4.19 Cc: Karoly Pados <pados@pados.hu> Link: https://lore.kernel.org/r/20211126094348.31698-1-johan@kernel.org Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Tested-by: Maarten Brock <m.brock@vanmierlo.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-22usb: xhci: Extend support for runtime power management for AMD's Yellow carp.Nehal Bakulchandra Shah1-1/+5
commit f886d4fbb7c97b8f5f447c92d2dab99c841803c0 upstream. AMD's Yellow Carp platform has few more XHCI controllers, enable the runtime power management support for the same. Signed-off-by: Nehal Bakulchandra Shah <Nehal-Bakulchandra.shah@amd.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20211215093216.1839065-1-Nehal-Bakulchandra.shah@amd.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-22