summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2023-12-20net: stmmac: Handle disabled MDIO busses from devicetreeAndrew Halaney1-1/+5
[ Upstream commit e23c0d21ce9234fbc31ece35663ababbb83f9347 ] Many hardware configurations have the MDIO bus disabled, and are instead using some other MDIO bus to talk to the MAC's phy. of_mdiobus_register() returns -ENODEV in this case. Let's handle it gracefully instead of failing to probe the MAC. Fixes: 47dd7a540b8a ("net: add support for STMicroelectronics Ethernet controllers.") Signed-off-by: Andrew Halaney <ahalaney@redhat.com> Reviewed-by: Serge Semin <fancer.lancer@gmail.com> Link: https://lore.kernel.org/r/20231212-b4-stmmac-handle-mdio-enodev-v2-1-600171acf79f@redhat.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-20dpaa2-switch: do not ask for MDB, VLAN and FDB replayIoana Ciornei1-9/+2
[ Upstream commit f24a49a375f65e8e75ee1b19d806f46dbaae57fd ] Starting with commit 4e51bf44a03a ("net: bridge: move the switchdev object replay helpers to "push" mode") the switchdev_bridge_port_offload() helper was extended with the intention to provide switchdev drivers easy access to object addition and deletion replays. This works by calling the replay helpers with non-NULL notifier blocks. In the same commit, the dpaa2-switch driver was updated so that it passes valid notifier blocks to the helper. At that moment, no regression was identified through testing. In the meantime, the blamed commit changed the behavior in terms of which ports get hit by the replay. Before this commit, only the initial port which identified itself as offloaded through switchdev_bridge_port_offload() got a replay of all port objects and FDBs. After this, the newly joining port will trigger a replay of objects on all bridge ports and on the bridge itself. This behavior leads to errors in dpaa2_switch_port_vlans_add() when a VLAN gets installed on the same interface multiple times. The intended mechanism to address this is to pass a non-NULL ctx to the switchdev_bridge_port_offload() helper and then check it against the port's private structure. But since the driver does not have any use for the replayed port objects and FDBs until it gains support for LAG offload, it's better to fix the issue by reverting the dpaa2-switch driver to not ask for replay. The pointers will be added back when we are prepared to ignore replays on unrelated ports. Fixes: b28d580e2939 ("net: bridge: switchdev: replay all VLAN groups") Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Link: https://lore.kernel.org/r/20231212164326.2753457-3-ioana.ciornei@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-20dpaa2-switch: fix size of the dma_unmapIoana Ciornei1-3/+4
[ Upstream commit 2aad7d4189a923b24efa8ea6ad09059882b1bfe4 ] The size of the DMA unmap was wrongly put as a sizeof of a pointer. Change the value of the DMA unmap to be the actual macro used for the allocation and the DMA map. Fixes: 1110318d83e8 ("dpaa2-switch: add tc flower hardware offload on ingress traffic") Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Link: https://lore.kernel.org/r/20231212164326.2753457-2-ioana.ciornei@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-20stmmac: dwmac-loongson: Make sure MDIO is initialized before useYanteng Si1-8/+6
[ Upstream commit e87d3a1370ce9f04770d789bcf7cce44865d2e8d ] Generic code will use mdio. If it is not initialized before use, the kernel will Oops. Fixes: 30bba69d7db4 ("stmmac: pci: Add dwmac support for Loongson") Signed-off-by: Yanteng Si <siyanteng@loongson.cn> Signed-off-by: Feiyang Chen <chenfeiyang@loongson.cn> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-20net: ena: Fix XDP redirection errorDavid Arinzon1-3/+0
[ Upstream commit 4ab138ca0a340e6d6e7a6a9bd5004bd8f83127ca ] When sending TX packets, the meta descriptor can be all zeroes as no meta information is required (as in XDP). This patch removes the validity check, as when `disable_meta_caching` is enabled, such TX packets will be dropped otherwise. Fixes: 0e3a3f6dacf0 ("net: ena: support new LLQ acceleration mode") Signed-off-by: Shay Agroskin <shayagr@amazon.com> Signed-off-by: David Arinzon <darinzon@amazon.com> Link: https://lore.kernel.org/r/20231211062801.27891-5-darinzon@amazon.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-20net: ena: Fix xdp drops handling due to multibuf packetsDavid Arinzon1-7/+10
[ Upstream commit 505b1a88d311ff6f8c44a34f94e3be21745cce6f ] Current xdp code drops packets larger than ENA_XDP_MAX_MTU. This is an incorrect condition since the problem is not the size of the packet, rather the number of buffers it contains. This commit: 1. Identifies and drops XDP multi-buffer packets at the beginning of the function. 2. Increases the xdp drop statistic when this drop occurs. 3. Adds a one-time print that such drops are happening to give better indication to the user. Fixes: 838c93dc5449 ("net: ena: implement XDP drop support") Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by: David Arinzon <darinzon@amazon.com> Link: https://lore.kernel.org/r/20231211062801.27891-3-darinzon@amazon.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-20net: ena: Destroy correct number of xdp queues upon failureDavid Arinzon1-6/+7
[ Upstream commit 41db6f99b5489a0d2ef26afe816ef0c6118d1d47 ] The ena_setup_and_create_all_xdp_queues() function freed all the resources upon failure, after creating only xdp_num_queues queues, instead of freeing just the created ones. In this patch, the only resources that are freed, are the ones allocated right before the failure occurs. Fixes: 548c4940b9f1 ("net: ena: Implement XDP_TX action") Signed-off-by: Shahar Itzko <itzko@amazon.com> Signed-off-by: David Arinzon <darinzon@amazon.com> Link: https://lore.kernel.org/r/20231211062801.27891-2-darinzon@amazon.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-20qed: Fix a potential use-after-free in qed_cxt_tables_allocDinghao Liu1-0/+1
[ Upstream commit b65d52ac9c085c0c52dee012a210d4e2f352611b ] qed_ilt_shadow_alloc() will call qed_ilt_shadow_free() to free p_hwfn->p_cxt_mngr->ilt_shadow on error. However, qed_cxt_tables_alloc() accesses the freed pointer on failure of qed_ilt_shadow_alloc() through calling qed_cxt_mngr_free(), which may lead to use-after-free. Fix this issue by setting p_mngr->ilt_shadow to NULL in qed_ilt_shadow_free(). Fixes: fe56b9e6a8d9 ("qed: Add module with basic common support") Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Link: https://lore.kernel.org/r/20231210045255.21383-1-dinghao.liu@zju.edu.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-20iavf: Handle ntuple on/off based on new state machines for flow directorPiotr Gardocki1-0/+59
[ Upstream commit 09d23b8918f9ab0f8114f6b94f2faf8bde3fb52a ] ntuple-filter feature on/off: Default is on. If turned off, the filters will be removed from both PF and iavf list. The removal is irrespective of current filter state. Steps to reproduce: ------------------- 1. Ensure ntuple is on. ethtool -K enp8s0 ntuple-filters on 2. Create a filter to receive the traffic into non-default rx-queue like 15 and ensure traffic is flowing into queue into 15. Now, turn off ntuple. Traffic should not flow to configured queue 15. It should flow to default RX queue. Fixes: 0dbfbabb840d ("iavf: Add framework to enable ethtool ntuple filters") Signed-off-by: Piotr Gardocki <piotrx.gardocki@intel.com> Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com> Signed-off-by: Ranganatha Rao <ranganatha.rao@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-20iavf: Introduce new state machines for flow directorPiotr Gardocki5-23/+139
[ Upstream commit 3a0b5a2929fdeda63fc921c2dbed237059acf732 ] New states introduced: IAVF_FDIR_FLTR_DIS_REQUEST IAVF_FDIR_FLTR_DIS_PENDING IAVF_FDIR_FLTR_INACTIVE Current FDIR state machines (SM) are not adequate to handle a few scenarios in the link DOWN/UP event, reset event and ntuple-feature. For example, when VF link goes DOWN and comes back UP administratively, the expectation is that previously installed filters should also be restored. But with current SM, filters are not restored. So with new SM, during link DOWN filters are marked as INACTIVE in the iavf list but removed from PF. After link UP, SM will transition from INACTIVE to ADD_REQUEST to restore the filter. Similarly, with VF reset, filters will be removed from the PF, but marked as INACTIVE in the iavf list. Filters will be restored after reset completion. Steps to reproduce: ------------------- 1. Create a VF. Here VF is enp8s0. 2. Assign IP addresses to VF and link partner and ping continuously from remote. Here remote IP is 1.1.1.1. 3. Check default RX Queue of traffic. ethtool -S enp8s0 | grep -E "rx-[[:digit:]]+\.packets" 4. Add filter - change default RX Queue (to 15 here) ethtool -U ens8s0 flow-type ip4 src-ip 1.1.1.1 action 15 loc 5 5. Ensure filter gets added and traffic is received on RX queue 15 now. Link event testing: ------------------- 6. Bring VF link down and up. If traffic flows to configured queue 15, test is success, otherwise it is a failure. Reset event testing: -------------------- 7. Reset the VF. If traffic flows to configured queue 15, test is success, otherwise it is a failure. Fixes: 0dbfbabb840d ("iavf: Add framework to enable ethtool ntuple filters") Signed-off-by: Piotr Gardocki <piotrx.gardocki@intel.com> Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com> Signed-off-by: Ranganatha Rao <ranganatha.rao@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-20octeontx2-af: Update RSS algorithm indexHariprasad Kelam1-11/+44
[ Upstream commit 570ba37898ecd9069beb58bf0b6cf84daba6e0fe ] The RSS flow algorithm is not set up correctly for promiscuous or all multi MCAM entries. This has an impact on flow distribution. This patch fixes the issue by updating flow algorithm index in above mentioned MCAM entries. Fixes: 967db3529eca ("octeontx2-af: add support for multicast/promisc packet replication feature") Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-20octeontx2-pf: Fix promisc mcam entry actionHariprasad Kelam1-3/+22
[ Upstream commit dbda436824ded8ef6a05bb82cd9baa8d42377a49 ] Current implementation is such that, promisc mcam entry action is set as multicast even when there are no trusted VFs. multicast action causes the hardware to copy packet data, which reduces the performance. This patch fixes this issue by setting the promisc mcam entry action to unicast instead of multicast when there are no trusted VFs. The same change is made for the 'allmulti' mcam entry action. Fixes: ffd2f89ad05c ("octeontx2-pf: Enable promisc/allmulti match MCAM entries.") Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-20octeontx2-af: fix a use-after-free in rvu_nix_register_reportersZhipeng Lu1-4/+1
[ Upstream commit 28a7cb045ab700de5554193a1642917602787784 ] The rvu_dl will be freed in rvu_nix_health_reporters_destroy(rvu_dl) after the create_workqueue fails, and after that free, the rvu_dl will be translate back through the following call chain: rvu_nix_health_reporters_destroy |-> rvu_nix_health_reporters_create |-> rvu_health_reporters_create |-> rvu_register_dl (label err_dl_health) Finally. in the err_dl_health label, rvu_dl being freed again in rvu_health_reporters_destroy(rvu) by rvu_nix_health_reporters_destroy. In the second calls of rvu_nix_health_reporters_destroy, however, it uses rvu_dl->rvu_nix_health_reporter, which is already freed at the end of rvu_nix_health_reporters_destroy in the first call. So this patch prevents the first destroy by instantly returning -ENONMEN when create_workqueue fails. In addition, since the failure of create_workqueue is the only entrence of label err, it has been integrated into the error-handling path of create_workqueue. Fixes: 5ed66306eab6 ("octeontx2-af: Add devlink health reporters for NIX") Signed-off-by: Zhipeng Lu <alexious@zju.edu.cn> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-20net: fec: correct queue selectionRadu Bulie1-16/+11
[ Upstream commit 9fc95fe95c3e2a63ced8eeca4b256518ab204b63 ] The old implementation extracted VLAN TCI info from the payload before the VLAN tag has been pushed in the payload. Another problem was that the VLAN TCI was extracted even if the packet did not have VLAN protocol header. This resulted in invalid VLAN TCI and as a consequence a random queue was computed. This patch fixes the above issues and use the VLAN TCI from the skb if it is present or VLAN TCI from payload if present. If no VLAN header is present queue 0 is selected. Fixes: 52c4a1a85f4b ("net: fec: add ndo_select_queue to fix TX bandwidth fluctuations") Signed-off-by: Radu Bulie <radu-andrei.bulie@nxp.com> Signed-off-by: Wei Fang <wei.fang@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-20net: vlan: introduce skb_vlan_eth_hdr()Vladimir Oltean10-17/+13
[ Upstream commit 1f5020acb33f926030f62563c86dffca35c7b701 ] Similar to skb_eth_hdr() introduced in commit 96cc4b69581d ("macvlan: do not assume mac_header is set in macvlan_broadcast()"), let's introduce a skb_vlan_eth_hdr() helper which can be used in TX-only code paths to get to the VLAN header based on skb->data rather than based on the skb_mac_header(skb). We also consolidate the drivers that dereference skb->data to go through this helper. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Stable-dep-of: 9fc95fe95c3e ("net: fec: correct queue selection") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-20atm: solos-pci: Fix potential deadlock on &tx_queue_lockChengfeng Ye1-2/+2
[ Upstream commit 15319a4e8ee4b098118591c6ccbd17237f841613 ] As &card->tx_queue_lock is acquired under softirq context along the following call chain from solos_bh(), other acquisition of the same lock inside process context should disable at least bh to avoid double lock. <deadlock #2> pclose() --> spin_lock(&card->tx_queue_lock) <interrupt> --> solos_bh() --> fpga_tx() --> spin_lock(&card->tx_queue_lock) This flaw was found by an experimental static analysis tool I am developing for irq-related deadlock. To prevent the potential deadlock, the patch uses spin_lock_bh() on &card->tx_queue_lock under process context code consistently to prevent the possible deadlock scenario. Fixes: 213e85d38912 ("solos-pci: clean up pclose() function") Signed-off-by: Chengfeng Ye <dg573847474@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-20atm: solos-pci: Fix potential deadlock on &cli_queue_lockChengfeng Ye1-2/+2
[ Upstream commit d5dba32b8f6cb39be708b726044ba30dbc088b30 ] As &card->cli_queue_lock is acquired under softirq context along the following call chain from solos_bh(), other acquisition of the same lock inside process context should disable at least bh to avoid double lock. <deadlock #1> console_show() --> spin_lock(&card->cli_queue_lock) <interrupt> --> solos_bh() --> spin_lock(&card->cli_queue_lock) This flaw was found by an experimental static analysis tool I am developing for irq-related deadlock. To prevent the potential deadlock, the patch uses spin_lock_bh() on the card->cli_queue_lock under process context code consistently to prevent the possible deadlock scenario. Fixes: 9c54004ea717 ("atm: Driver for Solos PCI ADSL2+ card.") Signed-off-by: Chengfeng Ye <dg573847474@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-20bnxt_en: Fix HWTSTAMP_FILTER_ALL packet timestamp logicMichael Chan2-4/+24
[ Upstream commit c13e268c0768659cdaae4bfe2fb24860bcc8ddb4 ] When the chip is configured to timestamp all receive packets, the timestamp in the RX completion is only valid if the metadata present flag is not set for packets received on the wire. In addition, internal loopback packets will never have a valid timestamp and the timestamp field will always be zero. We must exclude any 0 value in the timestamp field because there is no way to determine if it is a loopback packet or not. Add a new function bnxt_rx_ts_valid() to check for all timestamp valid conditions. Fixes: 66ed81dcedc6 ("bnxt_en: Enable packet timestamping for all RX packets") Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://lore.kernel.org/r/20231208001658.14230-5-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-20bnxt_en: Fix wrong return value check in bnxt_close_nic()Kalesh AP5-34/+16
[ Upstream commit bd6781c18cb5b5e5d8c5873fa9a51668e89ec76e ] The wait_event_interruptible_timeout() function returns 0 if the timeout elapsed, -ERESTARTSYS if it was interrupted by a signal, and the remaining jiffies otherwise if the condition evaluated to true before the timeout elapsed. Driver should have checked for zero return value instead of a positive value. MChan: Print a warning for -ERESTARTSYS. The close operation will proceed anyway when wait_event_interruptible_timeout() returns for any reason. Since we do the close no matter what, we should not return this error code to the caller. Change bnxt_close_nic() to a void function and remove all error handling from some of the callers. Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.") Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com> Reviewed-by: Vikas Gupta <vikas.gupta@broadcom.com> Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://lore.kernel.org/r/20231208001658.14230-4-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-20bnxt_en: Save ring error counters across resetMichael Chan2-1/+46
[ Upstream commit 4c70dbe3c0087b439b9e5015057e3e378cf5d8b1 ] Currently, the ring counters are stored in the per ring datastructure. During reset, all the rings are freed together with the associated datastructures. As a result, all the ring error counters will be reset to zero. Add logic to keep track of the total error counts of all the rings and save them before reset (including ifdown). The next patch will display these total ring error counters under ethtool -S. Link: https://lore.kernel.org/netdev/CACKFLimD-bKmJ1tGZOLYRjWzEwxkri-Mw7iFme1x2Dr0twdCeg@mail.gmail.com/ Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com> Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com> Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://lore.kernel.org/r/20230817231911.165035-5-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Stable-dep-of: bd6781c18cb5 ("bnxt_en: Fix wrong return value check in bnxt_close_nic()") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-20bnxt_en: Clear resource reservation during resumeSomnath Kotur1-0/+2
[ Upstream commit 9ef7c58f5abe41e6d91f37f28fe2d851ffedd92a ] We are issuing HWRM_FUNC_RESET cmd to reset the device including all reserved resources, but not clearing the reservations within the driver struct. As a result, when the driver re-initializes as part of resume, it believes that there is no need to do any resource reservation and goes ahead and tries to allocate rings which will eventually fail beyond a certain number pre-reserved by the firmware. Fixes: 674f50a5b026 ("bnxt_en: Implement new method to reserve rings.") Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com> Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com> Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://lore.kernel.org/r/20231208001658.14230-2-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-20qca_spi: Fix reset behaviorStefan Wahren1-1/+7
[ Upstream commit 1057812d146dd658c9a9a96d869c2551150207b5 ] In case of a reset triggered by the QCA7000 itself, the behavior of the qca_spi driver was not quite correct: - in case of a pending RX frame decoding the drop counter must be incremented and decoding state machine reseted - also the reset counter must always be incremented regardless of sync state Fixes: 291ab06ecf67 ("net: qualcomm: new Ethernet over SPI driver for QCA7000") Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Link: https://lore.kernel.org/r/20231206141222.52029-4-wahrenst@gmx.net Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-20qca_debug: Fix ethtool -G iface tx behaviorStefan Wahren1-3/+5
[ Upstream commit 96a7e861d9e04d07febd3011c30cd84cd141d81f ] After calling ethtool -g it was not possible to adjust the TX ring size again: # ethtool -g eth1 Ring parameters for eth1: Pre-set maximums: RX: 4 RX Mini: n/a RX Jumbo: n/a TX: 10 Current hardware settings: RX: 4 RX Mini: n/a RX Jumbo: n/a TX: 10 # ethtool -G eth1 tx 8 netlink error: Invalid argument The reason for this is that the readonly setting rx_pending get initialized and after that the range check in qcaspi_set_ringparam() fails regardless of the provided parameter. So fix this by accepting the exposed RX defaults. Instead of adding another magic number better use a new define here. Fixes: 291ab06ecf67 ("net: qualcomm: new Ethernet over SPI driver for QCA7000") Suggested-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Link: https://lore.kernel.org/r/20231206141222.52029-3-wahrenst@gmx.net Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-20qca_debug: Prevent crash on TX ring changesStefan Wahren2-5/+16
[ Upstream commit f4e6064c97c050bd9904925ff7d53d0c9954fc7b ] The qca_spi driver stop and restart the SPI kernel thread (via ndo_stop & ndo_open) in case of TX ring changes. This is a big issue because it allows userspace to prevent restart of the SPI kernel thread (via signals). A subsequent change of TX ring wrongly assume a valid spi_thread pointer which result in a crash. So prevent this by stopping the network traffic handling and temporary park the SPI thread. Fixes: 291ab06ecf67 ("net: qualcomm: new Ethernet over SPI driver for QCA7000") Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Link: https://lore.kernel.org/r/20231206141222.52029-2-wahrenst@gmx.net Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-20net/mlx5e: Fix possible deadlock on mlx5e_tx_timeout_workMoshe Shemesh2-3/+25
[ Upstream commit eab0da38912ebdad922ed0388209f7eb0a5163cd ] Due to the cited patch, devlink health commands take devlink lock and this may result in deadlock for mlx5e_tx_reporter as it takes local state_lock before calling devlink health report and on the other hand devlink health commands such as diagnose for same reporter take local state_lock after taking devlink lock (see kernel log below). To fix it, remove local state_lock from mlx5e_tx_timeout_work() before calling devlink_health_report() and take care to cancel the work before any call to close channels, which may free the SQs that should be handled by the work. Before cancel_work_sync(), use current_work() to check we are not calling it from within the work, as mlx5e_tx_timeout_work() itself may close the channels and reopen as part of recovery flow. While removing state_lock from mlx5e_tx_timeout_work() keep rtnl_lock to ensure no change in netdev->real_num_tx_queues, but use rtnl_trylock() and a flag to avoid deadlock by calling cancel_work_sync() before closing the channels while holding rtnl_lock too. Kernel log: ====================================================== WARNING: possible circular locking dependency detected 6.0.0-rc3_for_upstream_debug_2022_08_30_13_10 #1 Not tainted ------------------------------------------------------ kworker/u16:2/65 is trying to acquire lock: ffff888122f6c2f8 (&devlink->lock_key#2){+.+.}-{3:3}, at: devlink_health_report+0x2f1/0x7e0 but task is already holding lock: ffff888121d20be0 (&priv->state_lock){+.+.}-{3:3}, at: mlx5e_tx_timeout_work+0x70/0x280 [mlx5_core] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&priv->state_lock){+.+.}-{3:3}: __mutex_lock+0x12c/0x14b0 mlx5e_rx_reporter_diagnose+0x71/0x700 [mlx5_core] devlink_nl_cmd_health_reporter_diagnose_doit+0x212/0xa50 genl_family_rcv_msg_doit+0x1e9/0x2f0 genl_rcv_msg+0x2e9/0x530 netlink_rcv_skb+0x11d/0x340 genl_rcv+0x24/0x40 netlink_unicast+0x438/0x710 netlink_sendmsg+0x788/0xc40 sock_sendmsg+0xb0/0xe0 __sys_sendto+0x1c1/0x290 __x64_sys_sendto+0xdd/0x1b0 do_syscall_64+0x3d/0x90 entry_SYSCALL_64_after_hwframe+0x46/0xb0 -> #0 (&devlink->lock_key#2){+.+.}-{3:3}: __lock_acquire+0x2c8a/0x6200 lock_acquire+0x1c1/0x550 __mutex_lock+0x12c/0x14b0 devlink_health_report+0x2f1/0x7e0 mlx5e_health_report+0xc9/0xd7 [mlx5_core] mlx5e_reporter_tx_timeout+0x2ab/0x3d0 [mlx5_core] mlx5e_tx_timeout_work+0x1c1/0x280 [mlx5_core] process_one_work+0x7c2/0x1340 worker_thread+0x59d/0xec0 kthread+0x28f/0x330 ret_from_fork+0x1f/0x30 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&priv->state_lock); lock(&devlink->lock_key#2); lock(&priv->state_lock); lock(&devlink->lock_key#2); *** DEADLOCK *** 4 locks held by kworker/u16:2/65: #0: ffff88811a55b138 ((wq_completion)mlx5e#2){+.+.}-{0:0}, at: process_one_work+0x6e2/0x1340 #1: ffff888101de7db8 ((work_completion)(&priv->tx_timeout_work)){+.+.}-{0:0}, at: process_one_work+0x70f/0x1340 #2: ffffffff84ce8328 (rtnl_mutex){+.+.}-{3:3}, at: mlx5e_tx_timeout_work+0x53/0x280 [mlx5_core] #3: ffff888121d20be0 (&priv->state_lock){+.+.}-{3:3}, at: mlx5e_tx_timeout_work+0x70/0x280 [mlx5_core] stack backtrace: CPU: 1 PID: 65 Comm: kworker/u16:2 Not tainted 6.0.0-rc3_for_upstream_debug_2022_08_30_13_10 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 Workqueue: mlx5e mlx5e_tx_timeout_work [mlx5_core] Call Trace: <TASK> dump_stack_lvl+0x57/0x7d check_noncircular+0x278/0x300 ? print_circular_bug+0x460/0x460 ? find_held_lock+0x2d/0x110 ? __stack_depot_save+0x24c/0x520 ? alloc_chain_hlocks+0x228/0x700 __lock_acquire+0x2c8a/0x6200 ? register_lock_class+0x1860/0x1860 ? kasan_save_stack+0x1e/0x40 ? kasan_set_free_info+0x20/0x30 ? ____kasan_slab_free+0x11d/0x1b0 ? kfree+0x1ba/0x520 ? devlink_health_do_dump.part.0+0x171/0x3a0 ? devlink_health_report+0x3d5/0x7e0 lock_acquire+0x1c1/0x550 ? devlink_health_report+0x2f1/0x7e0 ? lockdep_hardirqs_on_prepare+0x400/0x400 ? find_held_lock+0x2d/0x110 __mutex_lock+0x12c/0x14b0 ? devlink_health_report+0x2f1/0x7e0 ? devlink_health_report+0x2f1/0x7e0 ? mutex_lock_io_nested+0x1320/0x1320 ? trace_hardirqs_on+0x2d/0x100 ? bit_wait_io_timeout+0x170/0x170 ? devlink_health_do_dump.part.0+0x171/0x3a0 ? kfree+0x1ba/0x520 ? devlink_health_do_dump.part.0+0x171/0x3a0 devlink_health_report+0x2f1/0x7e0 mlx5e_health_report+0xc9/0xd7 [mlx5_core] mlx5e_reporter_tx_timeout+0x2ab/0x3d0 [mlx5_core] ? lockdep_hardirqs_on_prepare+0x400/0x400 ? mlx5e_reporter_tx_err_cqe+0x1b0/0x1b0 [mlx5_core] ? mlx5e_tx_reporter_timeout_dump+0x70/0x70 [mlx5_core] ? mlx5e_tx_reporter_dump_sq+0x320/0x320 [mlx5_core] ? mlx5e_tx_timeout_work+0x70/0x280 [mlx5_core] ? mutex_lock_io_nested+0x1320/0x1320 ? process_one_work+0x70f/0x1340 ? lockdep_hardirqs_on_prepare+0x400/0x400 ? lock_downgrade+0x6e0/0x6e0 mlx5e_tx_timeout_work+0x1c1/0x280 [mlx5_core] process_one_work+0x7c2/0x1340 ? lockdep_hardirqs_on_prepare+0x400/0x400 ? pwq_dec_nr_in_flight+0x230/0x230 ? rwlock_bug.part.0+0x90/0x90 worker_thread+0x59d/0xec0 ? process_one_work+0x1340/0x1340 kthread+0x28f/0x330 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x1f/0x30 </TASK> Fixes: c90005b5f75c ("devlink: Hold the instance lock in health callbacks") Signed-off-by: Moshe Shemesh <moshe@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-20HID: lenovo: Restrict detection of patched firmware only to USB cptkbdMikhail Khvainitski1-1/+2
[ Upstream commit 43527a0094c10dfbf0d5a2e7979395a38de3ff65 ] Commit 46a0a2c96f0f ("HID: lenovo: Detect quirk-free fw on cptkbd and stop applying workaround") introduced a regression for ThinkPad TrackPoint Keyboard II which has similar quirks to cptkbd (so it uses the same workarounds) but slightly different so that there are false-positives during detecting well-behaving firmware. This commit restricts detecting well-behaving firmware to the only model which known to have one and have stable enough quirks to not cause false-positives. Fixes: 46a0a2c96f0f ("HID: lenovo: Detect quirk-free fw on cptkbd and stop applying workaround") Link: https://lore.kernel.org/linux-input/ZXRiiPsBKNasioqH@jekhomev/ Link: https://bbs.archlinux.org/viewtopic.php?pid=2135468#p2135468 Signed-off-by: Mikhail Khvainitski <me@khvoinitsky.org> Tested-by: Yauhen Kharuzhy <jekhor@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-20r8152: add vendor/device ID pair for ASUS USB-C2500Kelly Kane1-0/+1
[ Upstream commit 7037d95a047cd89b1f680eed253c6ab586bef1ed ] The ASUS USB-C2500 is an RTL8156 based 2.5G Ethernet controller. Add the vendor and product ID values to the driver. This makes Ethernet work with the adapter. Signed-off-by: Kelly Kane <kelly@hawknetworks.com> Link: https://lore.kernel.org/r/20231203011712.6314-1-kelly@hawknetworks.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-20r8152: add vendor/device ID pair for D-Link DUB-E250Antonio Napolitano1-0/+1
[ Upstream commit 72f93a3136ee18fd59fa6579f84c07e93424681e ] The D-Link DUB-E250 is an RTL8156 based 2.5G Ethernet controller. Add the vendor and product ID values to the driver. This makes Ethernet work with the adapter. Signed-off-by: Antonio Napolitano <anton@polit.no> Link: https://lore.kernel.org/r/CV200KJEEUPC.WPKAHXCQJ05I@mercurius Signed-off-by: Jakub Kicinski <kuba@kernel.org> Stable-dep-of: 7037d95a047c ("r8152: add vendor/device ID pair for ASUS USB-C2500") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-20r8152: add USB device driver for config selectionBjørn Mork1-33/+82
[ Upstream commit ec51fbd1b8a2bca2948dede99c14ec63dc57ff6b ] Subclassing the generic USB device driver to override the default configuration selection regardless of matching interface drivers. The r815x family devices expose a vendor specific function which the r8152 interface driver wants to handle. This is the preferred device mode. Additionally one or more USB class functions are usually supported for hosts lacking a vendor specific driver. The choice is USB configuration based, with one alternate function per configuration. Example device with both NCM and ECM alternate cfgs: T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 4 Spd=5000 MxCh= 0 D: Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 3 P: Vendor=0bda ProdID=8156 Rev=31.00 S: Manufacturer=Realtek S: Product=USB 10/100/1G/2.5G LAN S: SerialNumber=001000001 C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=256mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=00 Driver=r8152 E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 2 Ivl=128ms C: #Ifs= 2 Cfg#= 2 Atr=a0 MxPwr=256mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0d Prot=00 Driver= E: Ad=83(I) Atr=03(Int.) MxPS= 16 Ivl=128ms I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=01 Driver= I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=01 Driver= E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms C: #Ifs= 2 Cfg#= 3 Atr=a0 MxPwr=256mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver= E: Ad=83(I) Atr=03(Int.) MxPS= 16 Ivl=128ms I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver= I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver= E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms A problem with this is that Linux will prefer class functions over vendor specific functions. Using the above example, Linux defaults to cfg #2, running the device in a sub-optimal NCM mode. Previously we've attempted to work around the problem by blacklisting the devices in the ECM class driver "cdc_ether", and matching on the ECM class function in the vendor specific interface driver. The latter has been used to switch back to the vendor specific configuration when the driver is probed for a class function. This workaround has several issues; - class driver blacklists is additional maintanence cruft in an unrelated driver - class driver blacklists prevents users from optionally running the devices in class mode - each device needs double match entries in the vendor driver - the initial probing as a class function slows down device discovery Now these issues have become even worse with the introduction of firmware supporting both NCM and ECM, where NCM ends up as the default mode in Linux. To use the same workaround, we now have to blacklist the devices in to two different class drivers and add yet another match entry to the vendor specific driver. This patch implements an alternative workaround strategy - independent of the interface drivers. It avoids adding a blacklist to the cdc_ncm driver and will let us remove the existing blacklist from the cdc_ether driver. As an additional bonus, removing the blacklists allow users to select one of the other device modes if wanted. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-13drm/i915: Skip some timing checks on BXT/GLK DSI transcodersVille Syrjälä12-3/+79
[ Upstream commit 20c2dbff342aec13bf93c2f6c951da198916a455 ] Apparently some BXT/GLK systems have DSI panels whose timings don't agree with the normal cpu transcoder hblank>=32 limitation. This is perhaps fine as there are no specific hblank/etc. limits listed for the BXT/GLK DSI transcoders. Move those checks out from the global intel_mode_valid() into into connector specific .mode_valid() hooks, skipping BXT/GLK DSI connectors. We'll leave the basic [hv]display/[hv]total checks in intel_mode_valid() as those seem like sensible upper limits regardless of the transcoder used. Cc: stable@vger.kernel.org Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/9720 Fixes: 8f4b1068e7fc ("drm/i915: Check some transcoder timing minimum limits") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231127145028.4899-1-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com> (cherry picked from commit e0ef2daa8ca8ce4dbc2fd0959e383b753a87fd7d) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-13drm/i915/sdvo: stop caching has_hdmi_monitor in struct intel_sdvoJani Nikula1-7/+7
[ Upstream commit f2f9c8cb6421429ef166d6404426693212d0ca07 ] Use the information stored in display info. Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/3e9e1dcd554d470bdf474891a431b15e1880f9a0.1685437500.git.jani.nikula@intel.com Stable-dep-of: 20c2dbff342a ("drm/i915: Skip some timing checks on BXT/GLK DSI transcoders") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-13drm/i915/lvds: Use REG_BIT() & co.Ville Syrjälä2-26/+24
[ Upstream commit 9dd56e979cb69f5cd904574c852b620777a2f69f ] Use REG_BIT() & co. for the LVDS port register. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230130180540.8972-4-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com> Stable-dep-of: 20c2dbff342a ("drm/i915: Skip some timing checks on BXT/GLK DSI transcoders") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-13drm/i915/display: Drop check for doublescan mode in modevalidAnkit Nautiyal2-6/+0
[ Upstream commit 9d04eb20bc71a383b4d4e383b0b7fac8d38a2e34 ] Since the DP/HDMI connector do not set connector->doublescan_allowed, the doublescan modes will get automatically filtered during drm_helper_probe_single_connector_modes(). Therefore check for double scan modes is not required and is dropped from modevalid functions for both DP and HDMI. Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Uma Shankar <uma.shankar@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221017143038.1748319-2-ankit.k.nautiyal@intel.com Stable-dep-of: 20c2dbff342a ("drm/i915: Skip some timing checks on BXT/GLK DSI transcoders") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-13USB: gadget: core: adjust uevent timing on gadget unbindRoy Luo1-2/+2
commit 73ea73affe8622bdf292de898da869d441da6a9d upstream. The KOBJ_CHANGE uevent is sent before gadget unbind is actually executed, resulting in inaccurate uevent emitted at incorrect timing (the uevent would have USB_UDC_DRIVER variable set while it would soon be removed). Move the KOBJ_CHANGE uevent to the end of the unbind function so that uevent is sent only after the change has been made. Fixes: 2ccea03a8f7e ("usb: gadget: introduce UDC Class") Cc: stable@vger.kernel.org Signed-off-by: Roy Luo <royluo@google.com> Link: https://lore.kernel.org/r/20231128221756.2591158-1-royluo@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-13devcoredump: Send uevent once devcd is readyMukesh Ojha1-0/+3
commit af54d778a03853801d681c98c0c2a6c316ef9ca7 upstream. dev_coredumpm() creates a devcoredump device and adds it to the core kernel framework which eventually end up sending uevent to the user space and later creates a symbolic link to the failed device. An application running in userspace may be interested in this symbolic link to get the name of the failed device. In a issue scenario, once uevent sent to the user space it start reading '/sys/class/devcoredump/devcdX/failing_device' to get the actual name of the device which might not been created and it is in its path of creation. To fix this, suppress sending uevent till the failing device symbolic link gets created and send uevent once symbolic link is created successfully. Fixes: 833c95456a70 ("device coredump: add new device coredump class") Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/1700232572-25823-1-git-send-email-quic_mojha@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-13serial: 8250_omap: Add earlycon support for the AM654 UART controllerRonald Wahl1-0/+1
commit 8e42c301ce64e0dcca547626eb486877d502d336 upstream. Currently there is no support for earlycon on the AM654 UART controller. This commit adds it. Signed-off-by: Ronald Wahl <ronald.wahl@raritan.com> Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com> Link: https://lore.kernel.org/r/20231031131242.15516-1-rwahl@gmx.de Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-13serial: 8250: 8250_omap: Do not start RX DMA on THRI interruptRonald Wahl1-4/+6
commit c6bb057418876cdfdd29a6f7b8cef54539ee8811 upstream. Starting RX DMA on THRI interrupt is too early because TX may not have finished yet. This change is inspired by commit 90b8596ac460 ("serial: 8250: Prevent starting up DMA Rx on THRI interrupt") and fixes DMA issues I had with an AM62 SoC that is using the 8250 OMAP variant. Cc: stable@vger.kernel.org Fixes: c26389f998a8 ("serial: 8250: 8250_omap: Add DMA support for UARTs on K3 SoCs") Signed-off-by: Ronald Wahl <ronald.wahl@raritan.com> Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com> Link: https://lore.kernel.org/r/20231101171431.16495-1-rwahl@gmx.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-13serial: 8250: 8250_omap: Clear UART_HAS_RHR_IT_DIS bitRonald Wahl1-2/+2
commit 8973ab7a2441b286218f4a5c4c33680e2f139996 upstream. This fixes commit 439c7183e5b9 ("serial: 8250: 8250_omap: Disable RX interrupt after DMA enable") which unfortunately set the UART_HAS_RHR_IT_DIS bit in the UART_OMAP_IER2 register and never cleared it. Cc: stable@vger.kernel.org Fixes: 439c7183e5b9 ("serial: 8250: 8250_omap: Disable RX interrupt after DMA enable") Signed-off-by: Ronald Wahl <ronald.wahl@raritan.com> Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com> Link: https://lore.kernel.org/r/20231031110909.11695-1-rwahl@gmx.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-13serial: sc16is7xx: address RX timeout interrupt errataDaniel Mack1-0/+12
commit 08ce9a1b72e38cf44c300a44ac5858533eb3c860 upstream. This device has a silicon bug that makes it report a timeout interrupt but no data in the FIFO. The datasheet states the following in the errata section 18.1.4: "If the host reads the receive FIFO at the same time as a time-out interrupt condition happens, the host might read 0xCC (time-out) in the Interrupt Indication Register (IIR), but bit 0 of the Line Status Register (LSR) is not set (means there is no data in the receive FIFO)." The errata description seems to indicate it concerns only polled mode of operation when reading bit 0 of the LSR register. However, tests have shown and NXP has confirmed that the RXLVL register also yields 0 when the bug is triggered, and hence the IRQ driven implementation in this driver is equally affected. This bug has hit us on production units and when it does, sc16is7xx_irq() would spin forever because sc16is7xx_port_irq() keeps seeing an interrupt in the IIR register that is not cleared because the driver does not call into sc16is7xx_handle_rx() unless the RXLVL register reports at least one byte in the FIFO. Fix this by always reading one byte from the FIFO when this condition is detected in order to clear the interrupt. This approach was confirmed to be correct by NXP through their support channels. Tested by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Signed-off-by: Daniel Mack <daniel@zonque.org> Co-Developed-by: Maxim Popov <maxim.snafu@gmail.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20231123072818.1394539-1-daniel@zonque.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-13ARM: PL011: Fix DMA supportArnd Bergmann1-58/+54
commit 58ac1b3799799069d53f5bf95c093f2fe8dd3cc5 upstream. Since there is no guarantee that the memory returned by dma_alloc_coherent() is associated with a 'struct page', using the architecture specific phys_to_page() is wrong, but using virt_to_page() would be as well. Stop using sg lists altogether and just use the *_single() functions instead. This also simplifies the code a bit since the scatterlists in this driver always have only one entry anyway. https://lore.kernel.org/lkml/86db0fe5-930d-4cbb-bd7d-03