| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
[ Upstream commit d7fa5754e83cd36c4327eb2d806064e598a72ff6 ]
The BIOS can leave the AUX power well enabled on an output, even if this
isn't required (on platforms where the AUX power is only needed for an
AUX access). This was observed at least on PTL. To avoid the WARN which
would be triggered by this during the HW readout, convert the WARN to a
debug message.
Cc: stable@vger.kernel.org # v6.8+
Reported-by: Charlton Lin <charlton.lin@intel.com>
Tested-by: Khaled Almahallawy <khaled.almahallawy@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250811080152.906216-6-imre.deak@intel.com
(cherry picked from commit 6cb52cba474b2bec1a3018d3dbf75292059a29a1)
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
[ display->drm API => i915->drm ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit ae5bc07ec9f73a41734270ef3f800c5c8a7e0ad3 ]
Replace using stack-allocated buffers with a DMA-safe buffer for use
with spi_read(). This allows the driver to be safely used with
DMA-enabled SPI controllers.
The buffer array is also converted to a struct with a union to make the
usage of the memory in the buffer more clear and ensure proper alignment.
Fixes: 1f25ca11d84a ("iio: temperature: add support for Maxim thermocouple chips")
Signed-off-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://patch.msgid.link/20250721-iio-use-more-iio_declare_buffer_with_ts-3-v2-1-0c68d41ccf6c@baylibre.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
[ iio_push_to_buffers_with_ts() => iio_push_to_buffers_with_timestamp() ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 433b99e922943efdfd62b9a8e3ad1604838181f2 ]
Given that the buffer is copied to a kfifo that ultimately user space
can read, ensure we zero it.
Fixes: 403e5586b52e ("iio: light: as73211: New driver")
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://patch.msgid.link/20250802164436.515988-2-jic23@kernel.org
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit a801016da0bbb955acf1a551584790e3816bb4db ]
Use this new type to both slightly simplify the code and avoid
confusing static analysis tools. Mostly this series is about consistency
to avoid this code pattern getting copied into more drivers.
Acked-By: Matti Vaittinen <mazziesaccount@gmail.com> #For bu27034, rpr0521
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20241215182912.481706-9-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Stable-dep-of: 433b99e92294 ("iio: light: as73211: Ensure buffer holes are zeroed")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 86f390ba59cd8d5755bafe2b163c3e6b89d6bbd9 upstream.
This patch adds the necessary PCI ID for Intel Wildcat Lake
devices.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/20250812131101.2930199-1-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 45eae113dccaf8e502090ecf5b3d9e9b805add6f upstream.
This commit addresses a rarely observed endpoint command timeout
which causes kernel panic due to warn when 'panic_on_warn' is enabled
and unnecessary call trace prints when 'panic_on_warn' is disabled.
It is seen during fast software-controlled connect/disconnect testcases.
The following is one such endpoint command timeout that we observed:
1. Connect
=======
->dwc3_thread_interrupt
->dwc3_ep0_interrupt
->configfs_composite_setup
->composite_setup
->usb_ep_queue
->dwc3_gadget_ep0_queue
->__dwc3_gadget_ep0_queue
->__dwc3_ep0_do_control_data
->dwc3_send_gadget_ep_cmd
2. Disconnect
==========
->dwc3_thread_interrupt
->dwc3_gadget_disconnect_interrupt
->dwc3_ep0_reset_state
->dwc3_ep0_end_control_data
->dwc3_send_gadget_ep_cmd
In the issue scenario, in Exynos platforms, we observed that control
transfers for the previous connect have not yet been completed and end
transfer command sent as a part of the disconnect sequence and
processing of USB_ENDPOINT_HALT feature request from the host timeout.
This maybe an expected scenario since the controller is processing EP
commands sent as a part of the previous connect. It maybe better to
remove WARN_ON in all places where device endpoint commands are sent to
avoid unnecessary kernel panic due to warn.
Cc: stable <stable@kernel.org>
Co-developed-by: Akash M <akash.m5@samsung.com>
Signed-off-by: Akash M <akash.m5@samsung.com>
Signed-off-by: Selvarasu Ganesan <selvarasu.g@samsung.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lore.kernel.org/r/20250808125315.1607-1-selvarasu.g@samsung.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 58577118cc7cec9eb7c1836bf88f865ff2c5e3a3 upstream.
During a device-initiated disconnect, the End Transfer command resets
the event filter, allowing a new xferNotReady event to be generated
before the controller is fully halted. Processing this late event
incorrectly triggers a Start Transfer, which prevents the controller
from halting and results in a DSTS.DEVCTLHLT bit polling timeout.
Ignore the late xferNotReady event if the controller is already in a
disconnected state.
Fixes: 72246da40f37 ("usb: Introduce DesignWare USB3 DRD Driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Kuen-Han Tsai <khtsai@google.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20250807090700.2397190-1-khtsai@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2eb03376151bb8585caa23ed2673583107bb5193 upstream.
xHC controller may immediately reuse a slot_id after it's disabled,
giving it to a new enumerating device before the xhci driver freed
all resources related to the disabled device.
In such a scenario, device-A with slot_id equal to 1 is disconnecting
while device-B is enumerating, device-B will fail to enumerate in the
follow sequence.
1.[device-A] send disable slot command
2.[device-B] send enable slot command
3.[device-A] disable slot command completed and wakeup waiting thread
4.[device-B] enable slot command completed with slot_id equal to 1 and
wakeup waiting thread
5.[device-B] driver checks that slot_id is still in use (by device-A) in
xhci_alloc_virt_device, and fail to enumerate due to this
conflict
6.[device-A] xhci->devs[slot_id] set to NULL in xhci_free_virt_device
To fix driver's slot_id resources conflict, clear xhci->devs[slot_id] and
xhci->dcbba->dev_context_ptrs[slot_id] pointers in the interrupt context
when disable slot command completes successfully. Simultaneously, adjust
function xhci_free_virt_device to accurately handle device release.
[minor smatch warning and commit message fix -Mathias]
Cc: stable@vger.kernel.org
Fixes: 7faac1953ed1 ("xhci: avoid race between disable slot command and host runtime suspend")
Signed-off-by: Weitao Wang <WeitaoWang-oc@zhaoxin.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250819125844.2042452-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
clean
commit a381c6d6f646226924809d0ad01a9465786da463 upstream.
Presently in `max_contaminant_is_contaminant()` if there's no
contaminant detected previously, CC is open & stopped toggling and no
contaminant is currently present, TCPC.RC would be programmed to do DRP
toggling. However, it didn't actively look for a connection. This would
lead to Type-C not detect *any* new connections. Hence, in the above
situation, re-enable toggling & program TCPC to look for a new
connection.
Also, return early if TCPC was looking for connection as this indicates
TCPC has neither detected a potential connection nor a change in
contaminant state.
In addition, once dry detection is complete (port is dry), restart
toggling.
Fixes: 02b332a06397e ("usb: typec: maxim_contaminant: Implement check_contaminant callback")
Cc: stable <stable@kernel.org>
Signed-off-by: Amit Sunil Dhamne <amitsd@google.com>
Reviewed-by: Badhri Jagan Sridharan <badhri@google.com>
Link: https://lore.kernel.org/r/20250815-fix-upstream-contaminant-v2-2-6c8d6c3adafb@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
comparator values
commit cabb6c5f4d9e7f49bdf8c0a13c74bd93ee35f45a upstream.
Low power mode is enabled when reading CC resistance as part of
`max_contaminant_read_resistance_kohm()` and left in that state.
However, it's supposed to work with 1uA current source. To read CC
comparator values current source is changed to 80uA. This causes a storm
of CC interrupts as it (falsely) detects a potential contaminant. To
prevent this, disable low power mode current sourcing before reading
comparator values.
Fixes: 02b332a06397 ("usb: typec: maxim_contaminant: Implement check_contaminant callback")
Cc: stable <stable@kernel.org>
Signed-off-by: Amit Sunil Dhamne <amitsd@google.com>
Reviewed-by: Badhri Jagan Sridharan <badhri@google.com>
Link: https://lore.kernel.org/stable/20250814-fix-upstream-contaminant-v1-1-801ce8089031%40google.com
Link: https://lore.kernel.org/r/20250815-fix-upstream-contaminant-v2-1-6c8d6c3adafb@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a3dc32c635bae0ae569f489e00de0e8f015bfc25 upstream.
Many Realtek USB Wi-Fi dongles released in recent years have two modes:
one is driver CD mode which has Windows driver onboard, another one is
Wi-Fi mode. Add the US_FL_IGNORE_DEVICE quirk for these multi-mode devices.
Otherwise, usb_modeswitch may fail to switch them to Wi-Fi mode.
Currently there are only two USB IDs known to be used by these multi-mode
Wi-Fi dongles: 0bda:1a2b and 0bda:a192.
Information about Mercury MW310UH in /sys/kernel/debug/usb/devices.
T: Bus=02 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 12 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0bda ProdID=a192 Rev= 2.00
S: Manufacturer=Realtek
S: Product=DISK
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=(none)
E: Ad=8a(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=0b(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
Information about D-Link AX9U rev. A1 in /sys/kernel/debug/usb/devices.
T: Bus=03 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 55 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0bda ProdID=1a2b Rev= 0.00
S: Manufacturer=Realtek
S: Product=DISK
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=(none)
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
Cc: stable <stable@kernel.org>
Signed-off-by: Zenm Chen <zenmchen@gmail.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20250813162415.2630-1-zenmchen@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 98da66a70ad2396e5a508c4245367797ebc052ce upstream.
Since 'bcs->Residue' has the data type '__le32', convert it to the
correct byte order of the CPU using this driver when assigning it to
the local variable 'residue'.
Cc: stable <stable@kernel.org>
Fixes: 50a6cb932d5c ("USB: usb_storage: add ums-realtek driver")
Suggested-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://lore.kernel.org/r/20250813145247.184717-3-thorsten.blum@linux.dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6ca8af3c8fb584f3424a827f554ff74f898c27cd upstream.
Add the US_FL_BULK_IGNORE_TAG quirk for Novatek NTK96550-based camera
to fix USB resets after sending SCSI vendor commands due to CBW and
CSW tags difference, leading to undesired slowness while communicating
with the device.
Please find below the copy of /sys/kernel/debug/usb/devices with my
device plugged in (listed as TechSys USB mass storage here, the
underlying chipset being the Novatek NTK96550-based camera):
T: Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0603 ProdID=8611 Rev= 0.01
S: Manufacturer=TechSys
S: Product=USB Mass Storage
S: SerialNumber=966110000000100
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
Signed-off-by: Mael GUERIN <mael.guerin@murena.io>
Cc: stable <stable@kernel.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20250806164406.43450-1-mael.guerin@murena.io
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f9420f4757752f056144896024d5ea89e5a611f1 upstream.
Increase the External ROM access timeouts to prevent failures during
programming of External SPI EEPROM chips. The current timeouts are
too short for some SPI EEPROMs used with uPD720201 controllers.
The current timeout for Chip Erase in renesas_rom_erase() is 100 ms ,
the current timeout for Sector Erase issued by the controller before
Page Program in renesas_fw_download_image() is also 100 ms. Neither
timeout is sufficient for e.g. the Macronix MX25L5121E or MX25V5126F.
MX25L5121E reference manual [1] page 35 section "ERASE AND PROGRAMMING
PERFORMANCE" and page 23 section "Table 8. AC CHARACTERISTICS (Temperature
= 0°C to 70°C for Commercial grade, VCC = 2.7V ~ 3.6V)" row "tCE" indicate
that the maximum time required for Chip Erase opcode to complete is 2 s,
and for Sector Erase it is 300 ms .
MX25V5126F reference manual [2] page 47 section "13. ERASE AND PROGRAMMING
PERFORMANCE (2.3V - 3.6V)" and page 42 section "Table 8. AC CHARACTERISTICS
(Temperature = -40°C to 85°C for Industrial grade, VCC = 2.3V - 3.6V)" row
"tCE" indicate that the maximum time required for Chip Erase opcode to
complete is 3.2 s, and for Sector Erase it is 400 ms .
Update the timeouts such, that Chip Erase timeout is set to 5 seconds,
and Sector Erase timeout is set to 500 ms. Such lengthy timeouts ought
to be sufficient for majority of SPI EEPROM chips.
[1] https://www.macronix.com/Lists/Datasheet/Attachments/8634/MX25L5121E,%203V,%20512Kb,%20v1.3.pdf
[2] https://www.macronix.com/Lists/Datasheet/Attachments/8750/MX25V5126F,%202.5V,%20512Kb,%20v1.1.pdf
Fixes: 2478be82de44 ("usb: renesas-xhci: Add ROM loader for uPD720201")
Cc: stable <stable@kernel.org>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Link: https://lore.kernel.org/r/20250802225526.25431-1-marek.vasut+renesas@mailbox.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8fe06185e11ae753414aa6117f0e798aa77567ff upstream.
The USB core will unmap urb->transfer_dma after SETUP stage completes.
Then the USB controller will access unmapped memory when it received
device descriptor. If iommu is equipped, the entire test can't be
completed due to the memory accessing is blocked.
Fix it by calling map_urb_for_dma() again for IN stage. To reduce
redundant map for urb->transfer_buffer, this will also set
URB_NO_TRANSFER_DMA_MAP flag before first map_urb_for_dma() to skip
dma map for urb->transfer_buffer and clear URB_NO_TRANSFER_DMA_MAP
flag before second map_urb_for_dma().
Fixes: 216e0e563d81 ("usb: core: hcd: use map_urb_for_dma for single step set feature urb")
Cc: stable <stable@kernel.org>
Reviewed-by: Jun Li <jun.li@nxp.com>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20250806083955.3325299-1-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
do_insnlist_ioctl()
commit 3cd212e895ca2d58963fdc6422502b10dd3966bb upstream.
syzbot reports a KMSAN kernel-infoleak in `do_insn_ioctl()`. A kernel
buffer is allocated to hold `insn->n` samples (each of which is an
`unsigned int`). For some instruction types, `insn->n` samples are
copied back to user-space, unless an error code is being returned. The
problem is that not all the instruction handlers that need to return
data to userspace fill in the whole `insn->n` samples, so that there is
an information leak. There is a similar syzbot report for
`do_insnlist_ioctl()`, although it does not have a reproducer for it at
the time of writing.
One culprit is `insn_rw_emulate_bits()` which is used as the handler for
`INSN_READ` or `INSN_WRITE` instructions for subdevices that do not have
a specific handler for that instruction, but do have an `INSN_BITS`
handler. For `INSN_READ` it only fills in at most 1 sample, so if
`insn->n` is greater than 1, the remaining `insn->n - 1` samples copied
to userspace will be uninitialized kernel data.
Another culprit is `vm80xx_ai_insn_read()` in the "vm80xx" driver. It
never returns an error, even if it fails to fill the buffer.
Fix it in `do_insn_ioctl()` and `do_insnlist_ioctl()` by making sure
that uninitialized parts of the allocated buffer are zeroed before
handling each instruction.
Thanks to Arnaud Lecomte for their fix to `do_insn_ioctl()`. That fix
replaced the call to `kmalloc_array()` with `kcalloc()`, but it is not
always necessary to clear the whole buffer.
Fixes: ed9eccbe8970 ("Staging: add comedi core")
Reported-by: syzbot+a5e45f768aab5892da5d@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=a5e45f768aab5892da5d
Reported-by: syzbot+fb4362a104d45ab09cf9@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=fb4362a104d45ab09cf9
Cc: stable <stable@kernel.org> # 5.13+
Cc: Arnaud Lecomte <contact@arnaud-lcm.com>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20250725125324.80276-1-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 96cb948408b3adb69df7e451ba7da9d21f814d00 upstream.
The reproducer passed in an irq number(0x80008000) that was too large,
which triggered the oob.
Added an interrupt number check to prevent users from passing in an irq
number that was too large.
If `it->options[1]` is 31, then `1 << it->options[1]` is still invalid
because it shifts a 1-bit into the sign bit (which is UB in C).
Possible solutions include reducing the upper bound on the
`it->options[1]` value to 30 or lower, or using `1U << it->options[1]`.
The old code would just not attempt to request the IRQ if the
`options[1]` value were invalid. And it would still configure the
device without interrupts even if the call to `request_irq` returned an
error. So it would be better to combine this test with the test below.
Fixes: fff46207245c ("staging: comedi: pcl726: enable the interrupt support code")
Cc: stable <stable@kernel.org> # 5.13+
Reported-by: syzbot+5cd373521edd68bebcb3@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=5cd373521edd68bebcb3
Tested-by: syzbot+5cd373521edd68bebcb3@syzkaller.appspotmail.com
Signed-off-by: Edward Adam Davis <eadavis@qq.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/tencent_3C66983CC1369E962436264A50759176BF09@qq.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7afba9221f70d4cbce0f417c558879cba0eb5e66 upstream.
The `insn_rw_emulate_bits()` function is used as a default handler for
`INSN_READ` instructions for subdevices that have a handler for
`INSN_BITS` but not for `INSN_READ`. Similarly, it is used as a default
handler for `INSN_WRITE` instructions for subdevices that have a handler
for `INSN_BITS` but not for `INSN_WRITE`. It works by emulating the
`INSN_READ` or `INSN_WRITE` instruction handling with a constructed
`INSN_BITS` instruction. However, `INSN_READ` and `INSN_WRITE`
instructions are supposed to be able read or write multiple samples,
indicated by the `insn->n` value, but `insn_rw_emulate_bits()` currently
only handles a single sample. For `INSN_READ`, the comedi core will
copy `insn->n` samples back to user-space. (That triggered KASAN
kernel-infoleak errors when `insn->n` was greater than 1, but that is
being fixed more generally elsewhere in the comedi core.)
Make `insn_rw_emulate_bits()` either handle `insn->n` samples, or return
an error, to conform to the general expectation for `INSN_READ` and
`INSN_WRITE` handlers.
Fixes: ed9eccbe8970 ("Staging: add comedi core")
Cc: stable <stable@kernel.org> # 5.13+
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20250725141034.87297-1-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e664036cf36480414936cd91f4cfa2179a3d8367 upstream.
Another SanDisk 3.2Gen1 Flash Drive also need DELAY_INIT quick,
or it will randomly work incorrectly on Huawei hisi platforms
when doing reboot test.
Signed-off-by: Miao Li <limiao@kylinos.cn>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/20250801082728.469406-1-limiao870622@163.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 300a0cfe9f375b2843bcb331bcfa7503475ef5dd upstream.
In cdx_rpmsg_probe(), strscpy() is incorrectly called with the length of
the source string (excluding the NUL terminator) rather than the size of
the destination buffer. This results in one character less being copied
from 'cdx_rpmsg_id_table[0].name' to 'chinfo.name'.
Use the destination buffer size instead to ensure the name is copied
correctly.
Cc: stable <stable@kernel.org>
Fixes: 2a226927d9b8 ("cdx: add rpmsg communication channel for CDX")
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://lore.kernel.org/r/20250806090512.121260-2-thorsten.blum@linux.dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 9528d32873b38281ae105f2f5799e79ae9d086c2 upstream.
kcov_remote_start_usb_softirq() the begin of urb's completion callback.
HCDs marked HCD_BH will invoke this function from the softirq and
in_serving_softirq() will detect this properly.
Root-HUB (RH) requests will not be delayed to softirq but complete
immediately in IRQ context.
This will confuse kcov because in_serving_softirq() will report true if
the softirq is served after the hardirq and if the softirq got
interrupted by the hardirq in which currently runs.
This was addressed by simply disabling interrupts in
kcov_remote_start_usb_softirq() which avoided the interruption by the RH
while a regular completion callback was invoked.
This not only changes the behaviour while kconv is enabled but also
breaks PREEMPT_RT because now sleeping locks can no longer be acquired.
Revert the previous fix. Address the issue by invoking
kcov_remote_start_usb() only if the context is just "serving softirqs"
which is identified by checking in_serving_softirq() and in_hardirq()
must be false.
Fixes: f85d39dd7ed89 ("kcov, usb: disable interrupts in kcov_remote_start_usb_softirq")
Cc: stable <stable@kernel.org>
Reported-by: Yunseong Kim <ysk@kzalloc.com>
Closes: https://lore.kernel.org/all/20250725201400.1078395-2-ysk@kzalloc.com/
Tested-by: Yunseong Kim <ysk@kzalloc.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lore.kernel.org/r/20250811082745.ycJqBXMs@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b47b493d6387ae437098112936f32be27f73516c upstream.
In get_channel(), the reference obtained by bus_find_device_by_name()
was dropped via put_device() before accessing the device's driver data
Move put_device() after usage to avoid potential issues.
Fixes: 2485055394be ("staging: most: core: drop device reference")
Cc: stable <stable@kernel.org>
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20250804082955.3621026-1-linmq006@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit de18e978d0cda23e4c102e18092b63a5b0b3a800 upstream.
Fix passing a u32 value as a u16 buffer scan item. This works on little-
endian systems, but not on big-endian systems.
A new local variable is introduced for getting the register value and
the array is changed to a struct to make the data layout more explicit
rather than just changing the type and having to recalculate the proper
length needed for the timestamp.
Fixes: 1c28799257bc ("iio: light: isl29501: Add support for the ISL29501 ToF sensor.")
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250722-iio-use-more-iio_declare_buffer_with_ts-7-v2-1-d3ebeb001ed3@baylibre.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 43c0f6456f801181a80b73d95def0e0fd134e1cc upstream.
`devm_gpiod_get_optional()` may return non-NULL error pointer on failure.
Check its return value using `IS_ERR()` and propagate the error if
necessary.
Fixes: df6e71256c84 ("iio: pressure: bmp280: Explicitly mark GPIO optional")
Signed-off-by: Salah Triki <salah.triki@gmail.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250818092740.545379-2-salah.triki@gmail.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1ca61060de92a4320d73adfe5dc8d335653907ac upstream.
dma_map_sgtable() returns only 0 or the error code. Read sgt->nents to
get the number of mapped segments.
Fixes: 37e00703228a ("zynq_fpga: use sgtable-based scatterlist wrappers")
Reported-by: Pavel Pisa <pisa@fel.cvut.cz>
Closes: https://lore.kernel.org/linux-fpga/202508041548.22955.pisa@fel.cvut.cz/
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
Tested-by: Pavel Pisa <pisa@fel.cvut.cz>
Link: https://lore.kernel.org/r/20250806070605.1920909-2-yilun.xu@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d2d7a96b29ea6ab093973a1a37d26126db70c79f upstream.
This adds SDHCI_AM654_QUIRK_DISABLE_HS400 quirk which shall be used
to disable HS400 support. AM62P SR1.0 and SR1.1 do not support HS400
due to errata i2458 [0] so disable HS400 for these SoC revisions.
[0] https://www.ti.com/lit/er/sprz574a/sprz574a.pdf
Fixes: 37f28165518f ("arm64: dts: ti: k3-am62p: Add ITAP/OTAP values for MMC")
Cc: stable@vger.kernel.org
Signed-off-by: Judith Mendez <jm@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20250820193047.4064142-1-jm@ti.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
[ adapted quirk bit assignment from BIT(2) to BIT(1) ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit a40c5d727b8111b5db424a1e43e14a1dcce1e77f ]
Reading DPCD registers has side-effects in general. In particular
accessing registers outside of the link training register range
(0x102-0x106, 0x202-0x207, 0x200c-0x200f, 0x2216) is explicitly
forbidden by the DP v2.1 Standard, see
3.6.5.1 DPTX AUX Transaction Handling Mandates
3.6.7.4 128b/132b DP Link Layer LTTPR Link Training Mandates
Based on my tests, accessing the DPCD_REV register during the link
training of an UHBR TBT DP tunnel sink leads to link training failures.
Solve the above by using the DP_LANE0_1_STATUS (0x202) register for the
DPCD register access quirk.
Cc: <stable@vger.kernel.org>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250605082850.65136-2-imre.deak@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 779b1a1cb13ae17028aeddb2fbbdba97357a1e15 ]
Occasionally, the exit latency of the idle state selected by the menu
governor may exceed the PM QoS CPU wakeup latency limit. Namely, if the
scheduler tick has been stopped already and predicted_ns is greater than
the tick period length, the governor may return an idle state whose exit
latency exceeds latency_req because that decision is made before
checking the current idle state's exit latency.
For instance, say that there are 3 idle states, 0, 1, and 2. For idle
states 0 and 1, the exit latency is equal to the target residency and
the values are 0 and 5 us, respectively. State 2 is deeper and has the
exit latency and target residency of 200 us and 2 ms (which is greater
than the tick period length), respectively.
Say that predicted_ns is equal to TICK_NSEC and the PM QoS latency
limit is 20 us. After the first two iterations of the main loop in
menu_select(), idx becomes 1 and in the third iteration of it the target
residency of the current state (state 2) is greater than predicted_ns.
State 2 is not a polling one and predicted_ns is not less than TICK_NSEC,
so the check on whether or not the tick has been stopped is done. Say
that the tick has been stopped already and there are no imminent timers
(that is, delta_tick is greater than the target residency of state 2).
In that case, idx becomes 2 and it is returned immediately, but the exit
latency of state 2 exceeds the latency limit.
Address this issue by modifying the code to compare the exit latency of
the current idle state (idle state i) with the latency limit before
comparing its target residency with predicted_ns, which allows one
more exit_latency_ns check that becomes redundant to be dropped.
However, after the above change, latency_req cannot take the predicted_ns
value any more, which takes place after commit 38f83090f515 ("cpuidle:
menu: Remove iowait influence"), because it may cause a polling state
to be returned prematurely.
In the context of the previous example say that predicted_ns is 3000 and
the PM QoS latency limit is still 20 us. Additionally, say that idle
state 0 is a polling one. Moving the exit_latency_ns check before the
target_residency_ns one causes the loop to terminate in the second
iteration, before the target_residency_ns check, so idle state 0 will be
returned even though previously state 1 would be returned if there were
no imminent timers.
For this reason, remove the assignment of the predicted_ns value to
latency_req from the code.
Fixes: 5ef499cd571c ("cpuidle: menu: Handle stopped tick more aggressively")
Cc: 4.17+ <stable@vger.kernel.org> # 4.17+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Christian Loehle <christian.loehle@arm.com>
Link: https://patch.msgid.link/5043159.31r3eYUQgx@rafael.j.wysocki
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 38f83090f515b4b5d59382dfada1e7457f19aa47 ]
Remove CPU iowaiters influence on idle state selection.
Remove the menu notion of performance multiplier which increased with
the number of tasks that went to iowait sleep on this CPU and haven't
woken up yet.
Relying on iowait for cpuidle is problematic for a few reasons:
1. There is no guarantee that an iowaiting task will wake up on the
same CPU.
2. The task being in iowait says nothing about the idle duration, we
could be selecting shallower states for a long time.
3. The task being in iowait doesn't always imply a performance hit
with increased latency.
4. If there is such a performance hit, the number of iowaiting tasks
doesn't directly correlate.
5. The definition of iowait altogether is vague at best, it is
sprinkled across kernel code.
Signed-off-by: Christian Loehle <christian.loehle@arm.com>
Link: https://patch.msgid.link/20240905092645.2885200-2-christian.loehle@arm.com
[ rjw: Minor edits in the changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Stable-dep-of: 779b1a1cb13a ("cpuidle: governors: menu: Avoid selecting states with too much latency")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit c91e140c82eb58724c435f623702e51cc7896646 ]
On 32-bit systems, 64-bit BAR writes to admin queue registers are
performed as two 32-bit writes. Without locking, this can cause partial
writes when accessed concurrently.
Updated per-queue spinlocks is used to serialize these writes and prevent
race conditions.
Fixes: 824a156633df ("scsi: mpi3mr: Base driver code")
Cc: stable@vger.kernel.org
Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Link: https://lore.kernel.org/r/20250627194539.48851-4-ranjan.kumar@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 6853885b21cb1d7157cc14c9d30cc17141565bae ]
The volatile qualifier is redundant for __iomem pointers.
Cleaned up usage in mpi3mr_writeq() and sysif_regs pointer as per
Upstream compliance.
Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Link: https://lore.kernel.org/r/20250627194539.48851-3-ranjan.kumar@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Stable-dep-of: c91e140c82eb ("scsi: mpi3mr: Serialize admin queue BAR writes on 32-bit systems")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 6fa908abd19cc35c205f343b79c67ff38dbc9b76 ]
Fix the setting of the ODR register value in the probe function for
AD7177. The AD7177 chip has a different ODR value after reset than the
other chips (0x7 vs. 0x0) and 0 is a reserved value on that chip.
The driver already has this information available in odr_start_value
and uses it when checking valid values when writing to the
sampling_frequency attribute, but failed to set the correct initial
value in the probe function.
Fixes: 37ae8381ccda ("iio: adc: ad7173: add support for additional models")
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250710-iio-adc-ad7173-fix-setting-odr-in-probe-v1-1-78a100fec998@baylibre.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
[ Adjust context ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 114b06ee108cabc82b995fbac6672230a9776936 ]
Rockchip controllers can support up to 5.0 GT/s link speed. But the driver
doesn't set the Target Link Speed currently. This may cause failure in
retraining the link to 5.0 GT/s if supported by the endpoint. So set the
Target Link Speed to 5.0 GT/s in the Link Control and Status Register 2.
Fixes: e77f847df54c ("PCI: rockchip: Add Rockchip PCIe controller support")
Signed-off-by: Geraldo Nascimento <geraldogabriel@gmail.com>
[mani: fixed whitespace warning, commit message rewording, added fixes tag]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Robin Murphy <robin.murphy@arm.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/0afa6bc47b7f50e2e81b0b47d51c66feb0fb565f.1751322015.git.geraldogabriel@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit cbbfe9f683f0f9b6a1da2eaa53b995a4b5961086 ]
Current code uses custom-defined register offsets and bitfields for the
standard PCIe registers. This creates duplication as the PCI header already
defines them. So, switch to using the standard PCIe definitions and drop
the custom ones.
Suggested-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Geraldo Nascimento <geraldogabriel@gmail.com>
[mani: commit message rewording]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
[bhelgaas: include bitfield.h]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/e81700ef4b49f584bc8834bfb07b6d8995fc1f42.1751322015.git.geraldogabriel@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit c523fa63ac1d452abeeb4e699560ec3365037f32 ]
IMX8MQ_EP has three 64-bit BAR0/2/4 capable and programmable BARs. For
IMX8MQ_EP, use imx8q_pcie_epc_features (64-bit BARs 0, 2, 4) instead
of imx8m_pcie_epc_features (64-bit BARs 0, 2).
Fixes: 75c2f26da03f ("PCI: imx6: Add i.MX PCIe EP mode support")
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
[bhelgaas: add details in subject]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20250708091003.2582846-2-hongxing.zhu@nxp.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 687aedb73a401addf151c5f60e481e574b4c9ad9 ]
Add support for the i.MX8Q series (i.MX8QM, i.MX8QXP, and i.MX8DXL) PCIe
Endpoint (EP). On the i.MX8Q platforms, the PCI bus addresses differ
from the CPU addresses. However, the DesignWare (DWC) driver already
handles this in the common code.
Link: https://lore.kernel.org/r/20241119-pci_fixup_addr-v8-7-c4bfa5193288@nxp.com
Signed-off-by: Frank Li <Frank.Li@nxp.com>
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Richard Zhu <hongxing.zhu@nxp.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Stable-dep-of: c523fa63ac1d ("PCI: imx6: Add IMX8MQ_EP third 64-bit BAR in epc_features")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 022906afdf90327bce33d52fb4fb41b6c7d618fb ]
This driver, for the time being, assumes that the kernel page size is 4kB,
so it fails on loong64 and aarch64 with 16kB pages, and ppc64el with 64kB
pages.
Signed-off-by: Simon Richter <Simon.Richter@hogyros.de>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Cc: stable@vger.kernel.org # v6.8+
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://lore.kernel.org/r/20250802024152.3021-1-Simon.Richter@hogyros.de
(cherry picked from commit 0521a868222ffe636bf202b6e9d29292c1e19c62)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
[ Adjust context ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 9f35ab0e53ccbea57bb9cbad8065e0406d516195 upstream.
This function is supposed to return true for valid headers and false for
invalid. In a couple places it returns -EINVAL instead which means the
invalid headers are counted as true. Change it to return false.
Fixes: 9f9967fed9d0 ("soc: qcom: mdt_loader: Ensure we don't read past the ELF header")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/db57c01c-bdcc-4a0f-95db-b0f2784ea91f@sabinyo.mountain
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8604f633f59375687fa115d6f691de95a42520e3 upstream.
scsi_check_passthrough() is always called, but it doesn't check for if a
command completed successfully. As a result, if a command was successful and
the caller used SCMD_FAILURE_RESULT_ANY to indicate what failures it wanted
to retry, we will end up retrying the command. This will cause delays during
device discovery because of the command being sent multiple times. For some
USB devices it can also cause the wrong device size to be used.
This patch adds a check for if the command was successful. If it is we
return immediately instead of trying to match a failure.
Fixes: 994724e6b3f0 ("scsi: core: Allow passthrough to request midlayer retries")
Reported-by: Kris Karas <bugs-a21@moonlit-rail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219652
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Link: https://lore.kernel.org/r/20250107010220.7215-1-michael.christie@oracle.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Igor Pylypiv <ipylypiv@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
