summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2025-12-12bus: mhi: host: pci_generic: Add Telit FN990B40 modem supportDaniele Palmas1-0/+13
commit 00559ba3ae740e7544b48fb509b2b97f56615892 upstream. Add SDX72 based modem Telit FN990B40, reusing FN920C04 configuration. 01:00.0 Unassigned class [ff00]: Qualcomm Device 0309 Subsystem: Device 1c5d:201a Signed-off-by: Daniele Palmas <dnlplm@gmail.com> [mani: added sdx72 in the comment to identify the chipset] Signed-off-by: Manivannan Sadhasivam <mani@kernel.org> Link: https://patch.msgid.link/20250716091836.999364-1-dnlplm@gmail.com Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-12-12bus: mhi: host: pci_generic: Add Telit FN920C04 modem supportDaniele Palmas1-0/+39
commit 6348f62ef7ecc5855b710a7d4ea682425c38bb80 upstream. Add SDX35 based modem Telit FN920C04. $ lspci -vv 01:00.0 Unassigned class [ff00]: Qualcomm Device 011a Subsystem: Device 1c5d:2020 Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://patch.msgid.link/20250401093458.2953872-1-dnlplm@gmail.com Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-12-12staging: rtl8723bs: fix out-of-bounds read in OnBeacon ESR IE parsingNavaneeth K1-3/+5
commit 502ddcc405b69fa92e0add6c1714d654504f6fd7 upstream. The Extended Supported Rates (ESR) IE handling in OnBeacon accessed *(p + 1 + ielen) and *(p + 2 + ielen) without verifying that these offsets lie within the received frame buffer. A malformed beacon with an ESR IE positioned at the end of the buffer could cause an out-of-bounds read, potentially triggering a kernel panic. Add a boundary check to ensure that the ESR IE body and the subsequent bytes are within the limits of the frame before attempting to access them. This prevents OOB reads caused by malformed beacon frames. Signed-off-by: Navaneeth K <knavaneeth786@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-12-12staging: rtl8723bs: fix stack buffer overflow in OnAssocReq IE parsingNavaneeth K1-1/+4
commit 6ef0e1c10455927867cac8f0ed6b49f328f8cf95 upstream. The Supported Rates IE length from an incoming Association Request frame was used directly as the memcpy() length when copying into a fixed-size 16-byte stack buffer (supportRate). A malicious station can advertise an IE length larger than 16 bytes, causing a stack buffer overflow. Clamp ie_len to the buffer size before copying the Supported Rates IE, and correct the bounds check when merging Extended Supported Rates to prevent a second potential overflow. This prevents kernel stack corruption triggered by malformed association requests. Signed-off-by: Navaneeth K <knavaneeth786@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-12-12staging: rtl8723bs: fix out-of-bounds read in rtw_get_ie() parserNavaneeth K1-6/+8
commit 154828bf9559b9c8421fc2f0d7f7f76b3683aaed upstream. The Information Element (IE) parser rtw_get_ie() trusted the length byte of each IE without validating that the IE body (len bytes after the 2-byte header) fits inside the remaining frame buffer. A malformed frame can advertise an IE length larger than the available data, causing the parser to increment its pointer beyond the buffer end. This results in out-of-bounds reads or, depending on the pattern, an infinite loop. Fix by validating that (offset + 2 + len) does not exceed the limit before accepting the IE or advancing to the next element. This prevents OOB reads and ensures the parser terminates safely on malformed frames. Signed-off-by: Navaneeth K <knavaneeth786@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-12-12comedi: check device's attached status in compat ioctlsNikita Zhandarovich1-6/+36
commit 0de7d9cd07a2671fa6089173bccc0b2afe6b93ee upstream. Syzbot identified an issue [1] that crashes kernel, seemingly due to unexistent callback dev->get_valid_routes(). By all means, this should not occur as said callback must always be set to get_zero_valid_routes() in __comedi_device_postconfig(). As the crash seems to appear exclusively in i386 kernels, at least, judging from [1] reports, the blame lies with compat versions of standard IOCTL handlers. Several of them are modified and do not use comedi_unlocked_ioctl(). While functionality of these ioctls essentially copy their original versions, they do not have required sanity check for device's attached status. This, in turn, leads to a possibility of calling select IOCTLs on a device that has not been properly setup, even via COMEDI_DEVCONFIG. Doing so on unconfigured devices means that several crucial steps are missed, for instance, specifying dev->get_valid_routes() callback. Fix this somewhat crudely by ensuring device's attached status before performing any ioctls, improving logic consistency between modern and compat functions. [1] Syzbot report: BUG: kernel NULL pointer dereference, address: 0000000000000000 ... CR2: ffffffffffffffd6 CR3: 000000006c717000 CR4: 0000000000352ef0 Call Trace: <TASK> get_valid_routes drivers/comedi/comedi_fops.c:1322 [inline] parse_insn+0x78c/0x1970 drivers/comedi/comedi_fops.c:1401 do_insnlist_ioctl+0x272/0x700 drivers/comedi/comedi_fops.c:1594 compat_insnlist drivers/comedi/comedi_fops.c:3208 [inline] comedi_compat_ioctl+0x810/0x990 drivers/comedi/comedi_fops.c:3273 __do_compat_sys_ioctl fs/ioctl.c:695 [inline] __se_compat_sys_ioctl fs/ioctl.c:638 [inline] __ia32_compat_sys_ioctl+0x242/0x370 fs/ioctl.c:638 do_syscall_32_irqs_on arch/x86/entry/syscall_32.c:83 [inline] ... Reported-by: syzbot+ab8008c24e84adee93ff@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=ab8008c24e84adee93ff Fixes: 3fbfd2223a27 ("comedi: get rid of compat_alloc_user_space() mess in COMEDI_CHANINFO compat") Cc: stable <stable@kernel.org> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru> Link: https://patch.msgid.link/20251023132234.395794-1-n.zhandarovich@fintech.ru Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-12-12comedi: multiq3: sanitize config options in multiq3_attach()Nikita Zhandarovich1-0/+9
commit f24c6e3a39fa355dabfb684c9ca82db579534e72 upstream. Syzbot identified an issue [1] in multiq3_attach() that induces a task timeout due to open() or COMEDI_DEVCONFIG ioctl operations, specifically, in the case of multiq3 driver. This problem arose when syzkaller managed to craft weird configuration options used to specify the number of channels in encoder subdevice. If a particularly great number is passed to s->n_chan in multiq3_attach() via it->options[2], then multiple calls to multiq3_encoder_reset() at the end of driver-specific attach() method will be running for minutes, thus blocking tasks and affected devices as well. While this issue is most likely not too dangerous for real-life devices, it still makes sense to sanitize configuration inputs. Enable a sensible limit on the number of encoder chips (4 chips max, each with 2 channels) to stop this behaviour from manifesting. [1] Syzbot crash: INFO: task syz.2.19:6067 blocked for more than 143 seconds. ... Call Trace: <TASK> context_switch kernel/sched/core.c:5254 [inline] __schedule+0x17c4/0x4d60 kernel/sched/core.c:6862 __schedule_loop kernel/sched/core.c:6944 [inline] schedule+0x165/0x360 kernel/sched/core.c:6959 schedule_preempt_disabled+0x13/0x30 kernel/sched/core.c:7016 __mutex_lock_common kernel/locking/mutex.c:676 [inline] __mutex_lock+0x7e6/0x1350 kernel/locking/mutex.c:760 comedi_open+0xc0/0x590 drivers/comedi/comedi_fops.c:2868 chrdev_open+0x4cc/0x5e0 fs/char_dev.c:414 do_dentry_open+0x953/0x13f0 fs/open.c:965 vfs_open+0x3b/0x340 fs/open.c:1097 ... Reported-by: syzbot+7811bb68a317954a0347@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=7811bb68a317954a0347 Fixes: 77e01cdbad51 ("Staging: comedi: add multiq3 driver") Cc: stable <stable@kernel.org> Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Link: https://patch.msgid.link/20251023132205.395753-1-n.zhandarovich@fintech.ru Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-12-12comedi: c6xdigio: Fix invalid PNP driver unregistrationIan Abbott1-11/+35
commit 72262330f7b3ad2130e800cecf02adcce3c32c77 upstream. The Comedi low-level driver "c6xdigio" seems to be for a parallel port connected device. When the Comedi core calls the driver's Comedi "attach" handler `c6xdigio_attach()` to configure a Comedi to use this driver, it tries to enable the parallel port PNP resources by registering a PNP driver with `pnp_register_driver()`, but ignores the return value. (The `struct pnp_driver` it uses has only the `name` and `id_table` members filled in.) The driver's Comedi "detach" handler `c6xdigio_detach()` unconditionally unregisters the PNP driver with `pnp_unregister_driver()`. It is possible for `c6xdigio_attach()` to return an error before it calls `pnp_register_driver()` and it is possible for the call to `pnp_register_driver()` to return an error (that is ignored). In both cases, the driver should not be calling `pnp_unregister_driver()` as it does in `c6xdigio_detach()`. (Note that `c6xdigio_detach()` will be called by the Comedi core if `c6xdigio_attach()` returns an error, or if the Comedi core decides to detach the Comedi device from the driver for some other reason.) The unconditional call to `pnp_unregister_driver()` without a previous successful call to `pnp_register_driver()` will cause `driver_unregister()` to issue a warning "Unexpected driver unregister!". This was detected by Syzbot [1]. Also, the PNP driver registration and unregistration should be done at module init and exit time, respectively, not when attaching or detaching Comedi devices to the driver. (There might be more than one Comedi device being attached to the driver, although that is unlikely.) Change the driver to do the PNP driver registration at module init time, and the unregistration at module exit time. Since `c6xdigio_detach()` now only calls `comedi_legacy_detach()`, remove the function and change the Comedi driver "detach" handler to `comedi_legacy_detach`. ------------------------------------------- [1] Syzbot sample crash report: Unexpected driver unregister! WARNING: CPU: 0 PID: 5970 at drivers/base/driver.c:273 driver_unregister drivers/base/driver.c:273 [inline] WARNING: CPU: 0 PID: 5970 at drivers/base/driver.c:273 driver_unregister+0x90/0xb0 drivers/base/driver.c:270 Modules linked in: CPU: 0 UID: 0 PID: 5970 Comm: syz.0.17 Not tainted syzkaller #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/02/2025 RIP: 0010:driver_unregister drivers/base/driver.c:273 [inline] RIP: 0010:driver_unregister+0x90/0xb0 drivers/base/driver.c:270 Code: 48 89 ef e8 c2 e6 82 fc 48 89 df e8 3a 93 ff ff 5b 5d e9 c3 6d d9 fb e8 be 6d d9 fb 90 48 c7 c7 e0 f8 1f 8c e8 51 a2 97 fb 90 <0f> 0b 90 90 5b 5d e9 a5 6d d9 fb e8 e0 f4 41 fc eb 94 e8 d9 f4 41 RSP: 0018:ffffc9000373f9a0 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffffffff8ff24720 RCX: ffffffff817b6ee8 RDX: ffff88807c932480 RSI: ffffffff817b6ef5 RDI: 0000000000000001 RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000001 R12: ffffffff8ff24660 R13: dffffc0000000000 R14: 0000000000000000 R15: ffff88814cca0000 FS: 000055556dab1500(0000) GS:ffff8881249d9000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055f77f285cd0 CR3: 000000007d871000 CR4: 00000000003526f0 Call Trace: <TASK> comedi_device_detach_locked+0x12f/0xa50 drivers/comedi/drivers.c:207 comedi_device_detach+0x67/0xb0 drivers/comedi/drivers.c:215 comedi_device_attach+0x43d/0x900 drivers/comedi/drivers.c:1011 do_devconfig_ioctl+0x1b1/0x710 drivers/comedi/comedi_fops.c:872 comedi_unlocked_ioctl+0x165d/0x2f00 drivers/comedi/comedi_fops.c:2178 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:597 [inline] __se_sys_ioctl fs/ioctl.c:583 [inline] __x64_sys_ioctl+0x18e/0x210 fs/ioctl.c:583 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xcd/0xfa0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7fc05798eec9 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffcf8184238 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007fc057be5fa0 RCX: 00007fc05798eec9 RDX: 0000200000000080 RSI: 0000000040946400 RDI: 0000000000000003 RBP: 00007fc057a11f91 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007fc057be5fa0 R14: 00007fc057be5fa0 R15: 0000000000000003 </TASK> ------------------------------------------- Reported-by: syzbot+6616bba359cec7a1def1@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=6616bba359cec7a1def1 Fixes: 2c89e159cd2f ("Staging: comedi: add c6xdigio driver") Cc: stable <stable@kernel.org> Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Link: https://patch.msgid.link/20251023123141.6537-1-abbotti@mev.co.uk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-12-12wifi: rtw88: Add USB ID 2001:3329 for D-Link AC13U rev. A1Zenm Chen1-0/+2
commit b377dcd9a286a6f81922ae442cd1c743bc4a2b35 upstream. Add USB ID 2001:3329 for D-Link AC13U rev. A1 which is a RTL8812CU-based Wi-Fi adapter. Compile tested only. Cc: stable@vger.kernel.org # 6.6.x Signed-off-by: Zenm Chen <zenmchen@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250929035719.6172-2-zenmchen@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-12-12wifi: rtl8xxxu: Add USB ID 2001:3328 for D-Link AN3U rev. A1Zenm Chen1-0/+3
commit 3f9553f65d0b77b724565bbe42c4daa3fab57d5c upstream. Add USB ID 2001:3328 for D-Link AN3U rev. A1 which is a RTL8192FU-based Wi-Fi adapter. Compile tested only. Cc: stable@vger.kernel.org # 6.6.x Signed-off-by: Zenm Chen <zenmchen@gmail.com> Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250929035719.6172-1-zenmchen@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-12-12HID: elecom: Add support for ELECOM M-XT3URBK (018F)Naoki Ueki3-4/+8
[ Upstream commit cdcbb8e8d10f656642380ee13516290437b52b36 ] The ELECOM M-XT3URBK trackball has an additional device ID (0x018F), which shares the same report descriptor as the existing device (0x00FB). However, the driver does not currently recognize this new ID, resulting in only five buttons being functional. This patch adds the new device ID so that all six buttons work properly. Signed-off-by: Naoki Ueki <naoki25519@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-12platform/x86/amd/pmc: Add spurious_8042 to Xbox AllyAntheas Kapenekakis1-0/+8
[ Upstream commit c0ddc54016636dd8dedfaf1a3b482a95058e1db2 ] The Xbox Ally features a Van Gogh SoC that has spurious interrupts during resume. We get the following logs: atkbd_receive_byte: 20 callbacks suppressed atkbd serio0: Spurious ACK on isa0060/serio0. Some program might be trying to access hardware directly. So, add the spurious_8042 quirk for it. It does not have a keyboard, so this does not result in any functional loss. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4659 Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev> Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org> Link: https://patch.msgid.link/20251024152152.3981721-3-lkml@antheas.dev Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-12platform/x86/amd: pmc: Add Lenovo Legion Go 2 to pmc quirk listAntheas Kapenekakis1-0/+17
[ Upstream commit f945afe01c6768dcfed7868c671a26e1164c2284 ] The Lenovo Legion Go 2 takes a long time to resume from suspend. This is due to it having an nvme resume handler that interferes with IOMMU mappings. It is a common issue with older Lenovo laptops. Adding it to that quirk list fixes this issue. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4618 Suggested-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev> Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org> Link: https://patch.msgid.link/20251008135057.731928-1-lkml@antheas.dev Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-12platform/x86: huawei-wmi: add keys for HONOR modelsJia Ston1-0/+4
[ Upstream commit 5c72329716d0858621021193330594d5d26bf44d ] HONOR MagicBook X16/X14 models produced in 2025 cannot use the Print Screen and YOYO keys properly, with the system reporting them as unknown key presses (codes: 0x028b and 0x028e). To resolve this, a key_entry is added for both the HONOR Print Screen key and the HONOR YOYO key, ensuring they function correctly on these models. Signed-off-by: Ston Jia <ston.jia@outlook.com> Link: https://patch.msgid.link/20251029051804.220111-1-ston.jia@outlook.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-12HID: apple: Add SONiX AK870 PRO to non_apple_keyboards quirk listApril Grimoire1-0/+1
[ Upstream commit 743c81cdc98fd4fef62a89eb70efff994112c2d9 ] SONiX AK870 PRO keyboard pretends to be an apple keyboard by VID:PID, rendering function keys not treated properly. Despite being a SONiX USB DEVICE, it uses a different name, so adding it to the list. Signed-off-by: April Grimoire <april@aprilg.moe> Signed-off-by: Jiri Kosina <jkosina@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-12platform/x86: acer-wmi: Ignore backlight eventArmin Wolf1-0/+4
[ Upstream commit 444a9256f8d106e08a6bc2dc8ef28a8699e4b3ba ] On the Acer Nitro AN515-58, the event 4 - 0 is send by the ACPI firmware when the backlight up/down keys are pressed. Ignore this event to avoid spamming the kernel log with error messages, as the acpi-video driver already handles brightness up/down events. Reported-by: Bugaddr <Bugaddr@protonmail.com> Closes: https://bugaddr.tech/posts/2025-11-16-debugging-the-acer-nitro-5-an515-58-fn-f10-keyboard-backlight-bug-on-linux/#wmi-interface-issues Tested-by: Bugaddr <Bugaddr@protonmail.com> Signed-off-by: Armin Wolf <W_Armin@gmx.de> Link: https://patch.msgid.link/20251117155938.3030-1-W_Armin@gmx.de Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-12pinctrl: qcom: msm: Fix deadlock in pinmux configurationPraveen Talari1-1/+1
[ Upstream commit 1c2e70397b4125022dba80f6111271a37fb36bae ] Replace disable_irq() with disable_irq_nosync() in msm_pinmux_set_mux() to prevent deadlock when wakeup IRQ is triggered on the same GPIO being reconfigured. The issue occurs when a wakeup IRQ is triggered on a GPIO and the IRQ handler attempts to reconfigure the same GPIO's pinmux. In this scenario, msm_pinmux_set_mux() calls disable_irq() which waits for the currently running IRQ handler to complete, creating a circular dependency that results in deadlock. Using disable_irq_nosync() avoids waiting for the IRQ handler to complete, preventing the deadlock condition while still properly disabling the interrupt during pinmux reconfiguration. Suggested-by: Prasad Sodagudi <prasad.sodagudi@oss.qualcomm.com> Signed-off-by: Praveen Talari <praveen.talari@oss.qualcomm.com> Reviewed-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-12nvme: fix admin request_queue lifetimeKeith Busch1-1/+2
[ Upstream commit 03b3bcd319b3ab5182bc9aaa0421351572c78ac0 ] The namespaces can access the controller's admin request_queue, and stale references on the namespaces may exist after tearing down the controller. Ensure the admin request_queue is active by moving the controller's 'put' to after all controller references have been released to ensure no one is can access the request_queue. This fixes a reported use-after-free bug: BUG: KASAN: slab-use-after-free in blk_queue_enter+0x41c/0x4a0 Read of size 8 at addr ffff88c0a53819f8 by task nvme/3287 CPU: 67 UID: 0 PID: 3287 Comm: nvme Tainted: G E 6.13.2-ga1582f1a031e #15 Tainted: [E]=UNSIGNED_MODULE Hardware name: Jabil /EGS 2S MB1, BIOS 1.00 06/18/2025 Call Trace: <TASK> dump_stack_lvl+0x4f/0x60 print_report+0xc4/0x620 ? _raw_spin_lock_irqsave+0x70/0xb0 ? _raw_read_unlock_irqrestore+0x30/0x30 ? blk_queue_enter+0x41c/0x4a0 kasan_report+0xab/0xe0 ? blk_queue_enter+0x41c/0x4a0 blk_queue_enter+0x41c/0x4a0 ? __irq_work_queue_local+0x75/0x1d0 ? blk_queue_start_drain+0x70/0x70 ? irq_work_queue+0x18/0x20 ? vprintk_emit.part.0+0x1cc/0x350 ? wake_up_klogd_work_func+0x60/0x60 blk_mq_alloc_request+0x2b7/0x6b0 ? __blk_mq_alloc_requests+0x1060/0x1060 ? __switch_to+0x5b7/0x1060 nvme_submit_user_cmd+0xa9/0x330 nvme_user_cmd.isra.0+0x240/0x3f0 ? force_sigsegv+0xe0/0xe0 ? nvme_user_cmd64+0x400/0x400 ? vfs_fileattr_set+0x9b0/0x9b0 ? cgroup_update_frozen_flag+0x24/0x1c0 ? cgroup_leave_frozen+0x204/0x330 ? nvme_ioctl+0x7c/0x2c0 blkdev_ioctl+0x1a8/0x4d0 ? blkdev_common_ioctl+0x1930/0x1930 ? fdget+0x54/0x380 __x64_sys_ioctl+0x129/0x190 do_syscall_64+0x5b/0x160 entry_SYSCALL_64_after_hwframe+0x4b/0x53 RIP: 0033:0x7f765f703b0b Code: ff ff ff 85 c0 79 9b 49 c7 c4 ff ff ff ff 5b 5d 4c 89 e0 41 5c c3 66 0f 1f 84 00 00 00 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d dd 52 0f 00 f7 d8 64 89 01 48 RSP: 002b:00007ffe2cefe808 EFLAGS: 00000202 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007ffe2cefe860 RCX: 00007f765f703b0b RDX: 00007ffe2cefe860 RSI: 00000000c0484e41 RDI: 0000000000000003 RBP: 0000000000000000 R08: 0000000000000003 R09: 0000000000000000 R10: 00007f765f611d50 R11: 0000000000000202 R12: 0000000000000003 R13: 00000000c0484e41 R14: 0000000000000001 R15: 00007ffe2cefea60 </TASK> Reported-by: Casey Chen <cachen@purestorage.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-12HID: hid-input: Extend Elan ignore battery quirk to USBMario Limonciello (AMD)1-2/+3
[ Upstream commit 534ca75e8e3b713514b3f2da85dab96831cf5b2a ] USB Elan devices have the same problem as the I2C ones with a fake battery device showing up. Reviewed-by: Hans de Goede <hansg@kernel.org> Reported-by: André Barata <andretiagob@protonmail.com> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220722 Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org> Signed-off-by: Jiri Kosina <jkosina@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-12drm/amdkfd: Fix GPU mappings for APU after prefetchHarish Kasiviswanathan1-0/+2
[ Upstream commit eac32ff42393efa6657efc821231b8d802c1d485 ] Fix the following corner case:- Consider a 2M huge page SVM allocation, followed by prefetch call for the first 4K page. The whole range is initially mapped with single PTE. After the prefetch, this range gets split to first page + rest of the pages. Currently, the first page mapping is not updated on MI300A (APU) since page hasn't migrated. However, after range split PTE mapping it not valid. Fix this by forcing page table update for the whole range when prefetch is called. Calling prefetch on APU doesn't improve performance. If all it deteriotes. However, functionality has to be supported. v2: Use apu_prefer_gtt as this issue doesn't apply to APUs with carveout VRAM v3: Simplify by setting the flag for all ASICs as it doesn't affect dGPU v4: Remove v2 and v3 changes. Force update_mapping when range is split at a size that is not aligned to prange granularity Suggested-by: Philip Yang <Philip.Yang@amd.com> Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com> Reviewed-by: Philip Yang<Philip.Yang@amd.com> Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 076470b9f6f8d9c7c8ca73a9f054942a686f9ba7) Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-12Bluetooth: btrtl: Avoid loading the config file on security chipsMax Chou1-11/+13
[ Upstream commit cd8dbd9ef600435439bb0e70af0a1d9e2193aecb ] For chips with security enabled, it's only possible to load firmware with a valid signature pattern. If key_id is not zero, it indicates a security chip, and the driver will not load the config file. - Example log for a security chip. Bluetooth: hci0: RTL: examining hci_ver=0c hci_rev=000a lmp_ver=0c lmp_subver=8922 Bluetooth: hci0: RTL: rom_version status=0 version=1 Bluetooth: hci0: RTL: btrtl_initialize: key id 1 Bluetooth: hci0: RTL: loading rtl_bt/rtl8922au_fw.bin Bluetooth: hci0: RTL: cfg_sz 0, total sz 71301 Bluetooth: hci0: RTL: fw version 0x41c0c905 - Example log for a normal chip. Bluetooth: hci0: RTL: examining hci_ver=0c hci_rev=000a lmp_ver=0c lmp_subver=8922 Bluetooth: hci0: RTL: rom_version status=0 version=1 Bluetooth: hci0: RTL: btrtl_initialize: key id 0 Bluetooth: hci0: RTL: loading rtl_bt/rtl8922au_fw.bin Bluetooth: hci0: RTL: loading rtl_bt/rtl8922au_config.bin Bluetooth: hci0: RTL: cfg_sz 6, total sz 71307 Bluetooth: hci0: RTL: fw version 0x41c0c905 Tested-by: Hilda Wu <hildawu@realtek.com> Signed-off-by: Nial Ni <niall_ni@realsil.com.cn> Signed-off-by: Max Chou <max.chou@realtek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-12drm/vmwgfx: Use kref in vmw_bo_dirtyIan Forbes1-7/+5
[ Upstream commit c1962742ffff7e245f935903a4658eb6f94f6058 ] Rather than using an ad hoc reference count use kref which is atomic and has underflow warnings. Signed-off-by: Ian Forbes <ian.forbes@broadcom.com> Signed-off-by: Zack Rusin <zack.rusin@broadcom.com> Link: https://patch.msgid.link/20251030193640.153697-1-ian.forbes@broadcom.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-12spi: imx: keep dma request disabled before dma transfer setupRobin Gong1-4/+11
[ Upstream commit 86d57d9c07d54e8cb385ffe800930816ccdba0c1 ] Since sdma hardware configure postpone to transfer phase, have to disable dma request before dma transfer setup because there is a hardware limitation on sdma event enable(ENBLn) as below: "It is thus essential for the Arm platform to program them before any DMA request is triggered to the SDMA, otherwise an unpredictable combination of channels may be started." Signed-off-by: Carlos Song <carlos.song@nxp.com> Signed-off-by: Robin Gong <yibin.gong@nxp.com> Link: https://patch.msgid.link/20251024055320.408482-1-carlos.song@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-12spi: xilinx: increase number of retries before declaring stallAlvaro Gamez Machado1-1/+1
[ Upstream commit 939edfaa10f1d22e6af6a84bf4bd96dc49c67302 ] SPI devices using a (relative) slow frequency need a larger time. For instance, microblaze running at 83.25MHz and performing a 3 bytes transaction using a 10MHz/16 = 625kHz needed this stall value increased to at least 20. The SPI device is quite slow, but also is the microblaze, so set this value to 32 to give it even more margin. Signed-off-by: Alvaro Gamez Machado <alvaro.gamez@hazent.com> Reviewed-by: Ricardo Ribalda <ribalda@chromium.org> Link: https://patch.msgid.link/20251106134545.31942-1-alvaro.gamez@hazent.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-12USB: serial: kobil_sct: fix TIOCMBIS and TIOCMBICJohan Hovold1-9/+9
commit d432df758f92c4c28aac409bc807fd1716167577 upstream. Asserting or deasserting a modem control line using TIOCMBIS or TIOCMBIC should not deassert any lines that are not in the mask. Fix this long-standing issue dating back to 2003 when the support for these ioctls was added with the introduction of the tiocmset() callback. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-12-12USB: serial: belkin_sa: fix TIOCMBIS and TIOCMBICJohan Hovold1-11/+17
commit b6e0b3016187446ddef9edac03cd9d544ac63f11 upstream. Asserting or deasserting a modem control line using TIOCMBIS or TIOCMBIC should not deassert any lines that are not in the mask. Fix this long-standing regression dating back to 2003 when the tiocmset() callback was introduced. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-12-12serial: add support of CPCI cardsMagne Bruno1-0/+37
commit 0e5a99e0e5f50353b86939ff6e424800d769c818 upstream. Addi-Data GmbH is manufacturing multi-serial ports cards supporting CompactPCI (known as CPCI). Those cards are identified with different DeviceIds. Those cards integrating standard UARTs work the same way as PCI/PCIe models already supported in the serial driver. Signed-off-by: Magne Bruno <magne.bruno@addi-data.com> Link: https://patch.msgid.link/20251110162456.341029-1-magne.bruno@addi-data.com Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-12-12USB: serial: ftdi_sio: match on interface number for jtagJohan Hovold1-48/+24
commit 4e31a5d0a9ee672f708fc993c1d5520643f769fd upstream. Some FTDI devices have the first port reserved for JTAG and have been using a dedicated quirk to prevent binding to it. As can be inferred directly or indirectly from the commit messages, almost all of these devices are dual port devices which means that the more recently added macro for matching on interface number can be used instead (and some such devices do so already). This avoids probing interfaces that will never be bound and cleans up the match table somewhat. Note that the JTAG quirk is kept for quad port devices, which would otherwise require three match entries. Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-12-12USB: serial: option: move Telit 0x10c7 composition in the right placeFabio Porcedda1-3/+3
commit 072f2c49572547f4b0776fe2da6b8f61e4b34699 upstream. Move Telit 0x10c7 composition right after 0x10c6 composition and before 0x10c8 composition. Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-12-12USB: serial: option: add Telit Cinterion FE910C04 new compositionsFabio Porcedda1-0/+14
commit c908039a29aa70870871f4848125b3d743f929bf upstream. Add the following Telit Cinterion new compositions: 0x10c1: RNDIS + tty (AT/NMEA) + tty (AT) + tty (diag) T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=10c1 Rev=05.15 S: Manufacturer=Telit Cinterion S: Product=FE910 S: SerialNumber=f71b8b32 C: #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=ef(misc ) Sub=04 Prot=01 Driver=rndis_host E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms 0x10c2: MBIM + tty (AT/NMEA) + tty (AT) + tty (diag) T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 8 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=10c2 Rev=05.15 S: Manufacturer=Telit Cinterion S: Product=FE910 S: SerialNumber=f71b8b32 C: #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms 0x10c3: ECM + tty (AT/NMEA) + tty (AT) + tty (diag) T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 9 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=10c3 Rev=05.15 S: Manufacturer=Telit Cinterion S: Product=FE910 S: SerialNumber=f71b8b32 C: #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=06 Prot=00 Driver=cdc_ether E: Ad=82(I) Atr=03(Int.) MxPS= 16 Ivl=32ms I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms 0x10c5: RNDIS + tty (AT) + tty (AT) + tty (diag) T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 10 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=10c5 Rev=05.15 S: Manufacturer=Telit Cinterion S: Product=FE910 S: SerialNumber=f71b8b32 C: #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=ef(misc ) Sub=04 Prot=01 Driver=rndis_host E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms 0x10c6: MBIM + tty (AT) + tty (AT) + tty (diag) T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 11 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=10c6 Rev=05.15 S: Manufacturer=Telit Cinterion S: Product=FE910 S: SerialNumber=f71b8b32 C: #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms 0x10c9: MBIM + tty (AT) + tty (diag) + DPL (Data Packet Logging) + adb T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 13 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=10c9 Rev=05.15 S: Manufacturer=Telit Cinterion S: Product=FE910 S: SerialNumber=f71b8b32 C: #Ifs= 6 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 4 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none) E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms 0x10cb: RNDIS + tty (AT) + tty (diag) + DPL (Data Packet Logging) + adb T: Bus=01 Lev=01 Prnt=01 Port=09 Cnt=01 Dev#= 9 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=10cb Rev=05.15 S: Manufacturer=Telit Cinterion S: Product=FE910 S: SerialNumber=f71b8b32 C: #Ifs= 6 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=ef(misc ) Sub=04 Prot=01 Driver=rndis_host E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 4 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none) E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Cc: stable@vger.kernel.org Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-12-12USB: serial: option: add Foxconn T99W760Slark Xiao1-0/+2
commit 7970b4969c4c99bcdaf105f9f39c6d2021f6d244 upstream. T99W760 is designed based on Qualcomm SDX35 (5G redcap) chip. There are three serial ports to be enumerated: Modem, NMEA and Diag. test evidence as below: T: Bus=03 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#= 4 Spd=5000 MxCh= 0 D: Ver= 3.20 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0489 ProdID=e123 Rev=05.15 S: Manufacturer=QCOM S: Product=SDXBAAGHA-IDP _SN:39A8D3E4 S: SerialNumber=39a8d3e4 C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=896mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=85(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=86(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=88(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms 0&1: MBIM, 2:Modem, 3:GNSS(non-serial port), 4: NMEA, 5:Diag Signed-off-by: Slark Xiao <slark_xiao@163.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-12-12comedi: pcl818: fix null-ptr-deref in pcl818_ai_cancel()Nikita Zhandarovich1-3/+2
commit a51f025b5038abd3d22eed2ede4cd46793d89565 upstream. Syzbot identified an issue [1] in pcl818_ai_cancel(), which stems from the fact that in case of early device detach via pcl818_detach(), subdevice dev->read_subdev may not have initialized its pointer to &struct comedi_async as intended. Thus, any such dereferencing of &s->async->cmd will lead to general protection fault and kernel crash. Mitigate this problem by removing a call to pcl818_ai_cancel() from pcl818_detach() altogether. This way, if the subdevice setups its support for async commands, everything async-related will be handled via subdevice's own ->cancel() function in comedi_device_detach_locked() even before pcl818_detach(). If no support for asynchronous commands is provided, there is no need to cancel anything either. [1] Syzbot crash: Oops: general protection fault, probably for non-canonical address 0xdffffc0000000005: 0000 [#1] SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000028-0x000000000000002f] CPU: 1 UID: 0 PID: 6050 Comm: syz.0.18 Not tainted syzkaller #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/18/2025 RIP: 0010:pcl818_ai_cancel+0x69/0x3f0 drivers/comedi/drivers/pcl818.c:762 ... Call Trace: <TASK> pcl818_detach+0x66/0xd0 drivers/comedi/drivers/pcl818.c:1115 comedi_device_detach_locked+0x178/0x750 drivers/comedi/drivers.c:207 do_devconfig_ioctl drivers/comedi/comedi_fops.c:848 [inline] comedi_unlocked_ioctl+0xcde/0x1020 drivers/comedi/comedi_fops.c:2178 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:597 [inline] ... Reported-by: syzbot+fce5d9d5bd067d6fbe9b@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=fce5d9d5bd067d6fbe9b Fixes: 00aba6e7b565 ("staging: comedi: pcl818: remove 'neverending_ai' from private data") Cc: stable <stable@kernel.org> Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Link: https://patch.msgid.link/20251023141457.398685-1-n.zhandarovich@fintech.ru Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-12-07spi: spi-nxp-fspi: Check return value of devm_mutex_init()Thomas Weißschuh1-1/+3
commit d24a54e032021cf381af3c3cf119cc5cf6b3c1be upstream. devm_mutex_init() can fail. With CONFIG_DEBUG_MUTEXES=y the mutex will be marked as unusable and trigger errors on usage. Add the missed check. Fixes: 48900813abd2 ("spi: spi-nxp-fspi: remove the goto in probe") Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Reviewed-by: Mark Brown <broonie@kernel.org> Signed-off-by: Boqun Feng <boqun.feng@gmail.com> Link: https://lore.kernel.org/r/20250617-must_check-devm_mutex_init-v7-1-d9e449f4d224@weissschuh.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-12-07drm/i915/dp: Initialize the source OUI write timestamp alwaysImre Deak1-1/+4
commit 5861258c4e6a829a10200b41ba3fb4d7d1a4054f upstream. If the source OUI DPCD register value matches the expected Intel OUI value, the write timestamp doesn't get updated leaving it at the 0 initial value if the OUI wasn't written before. This can lead to an incorrect wait duration in intel_dp_wait_source_oui(), since jiffies is not inited to 0 in general (on a 32 bit system INITIAL_JIFFIES is set to 5 minutes ahead of wrap-around). Fix this by intializing the write timestamp in the above case as well. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241025160259.3088727-4-imre.deak@intel.com Cc: "H. Nikolaus Schaller" <hns@goldelico.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-12-07wifi: ath12k: correctly handle mcast packets for clientsSarika Sharma3-0/+10
commit 4541b0c8c3c1b85564971d497224e57cf8076a02 upstream. Currently, RX is_mcbc bit is set for packets sent from client as destination address (DA) is multicast/broadcast address, but packets are actually unicast as receiver address (RA) is not multicast address. Hence, packets are not handled properly due to this is_mcbc bit. Therefore, reset the is_mcbc bit if interface type is AP. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1 Signed-off-by: Sarika Sharma <quic_sarishar@quicinc.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250411061523.859387-3-quic_sarishar@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> [ Adjust context ] Signed-off-by: Oliver Sedlbauer <os@dev.tdt.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-12-07net: dsa: microchip: Free previously initialized ports on init failuresBastien Curutchet (Schneider Electric)1-12/+11
[ Upstream commit 0f80e21bf6229637e193248fbd284c0ec44bc0fd ] If a port interrupt setup fails after at least one port has already been successfully initialized, the gotos miss some resource releasing: - the already initialized PTP IRQs aren't released - the already initialized port IRQs aren't released if the failure occurs in ksz_pirq_setup(). Merge 'out_girq' and 'out_ptpirq' into a single 'port_release' label. Behind this label, use the reverse loop to release all IRQ resources for all initialized ports. Jump in the middle of the reverse loop if an error occurs in ksz_ptp_irq_setup() to only release the port IRQ of the current iteration. Cc: stable@vger.kernel.org Fixes: c9cd961c0d43 ("net: dsa: microchip: lan937x: add interrupt support for port phy link") Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com> Link: https://patch.msgid.link/20251120-ksz-fix-v6-4-891f80ae7f8f@bootlin.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-12-07net: dsa: microchip: Do not execute PTP driver code for unsupported switchesTristram Ha2-11/+30
[ Upstream commit 6ed3472173c575cd8aaed6c62eb74f7728404ee6 ] The PTP driver code only works for certain KSZ switches like KSZ9477, KSZ9567, LAN937X and their varieties. This code is enabled by kernel configuration CONFIG_NET_DSA_MICROCHIP_KSZ_PTP. As the DSA driver is common to work with all KSZ switches this PTP code is not appropriate for other unsupported switches. The ptp_capable indication is added to the chip data structure to signal whether to execute those code. Signed-off-by: Tristram Ha <tristram.ha@microchip.com> Link: https://patch.msgid.link/20241218020240.70601-1-Tristram.Ha@microchip.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Stable-dep-of: 0f80e21bf622 ("net: dsa: microchip: Free previously initialized ports on init failures") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-12-07drm, fbcon, vga_switcheroo: Avoid race condition in fbcon setupThomas Zimmermann4-17/+9
[ Upstream commit eb76d0f5553575599561010f24c277cc5b31d003 ] Protect vga_switcheroo_client_fb_set() with console lock. Avoids OOB access in fbcon_remap_all(). Without holding the console lock the call races with switching outputs. VGA switcheroo calls fbcon_remap_all() when switching clients. The fbcon function uses struct fb_info.node, which is set by register_framebuffer(). As the fb-helper code currently sets up VGA switcheroo before registering the framebuffer, the value of node is -1 and therefore not a legal value. For example, fbcon uses the value within set_con2fb_map() [1] as an index into an array. Moving vga_switcheroo_client_fb_set() after register_framebuffer() can result in VGA switching that does not switch fbcon correctly. Therefore move vga_switcheroo_client_fb_set() under fbcon_fb_registered(), which already holds the console lock. Fbdev calls fbcon_fb_registered() from within register_framebuffer(). Serializes the helper with VGA switcheroo's call to fbcon_remap_all(). Although vga_switcheroo_client_fb_set() takes an instance of struct fb_info as parameter, it really only needs the contained fbcon state. Moving the call to fbcon initialization is therefore cleaner than before. Only amdgpu, i915, nouveau and radeon support vga_switcheroo. For all other drivers, this change does nothing. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://elixir.bootlin.com/linux/v6.17/source/drivers/video/fbdev/core/fbcon.c#L2942 # [1] Fixes: 6a9ee8af344e ("vga_switcheroo: initial implementation (v15)") Acked-by: Javier Martinez Canillas <javierm@redhat.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Cc: dri-devel@lists.freedesktop.org Cc: nouveau@lists.freedesktop.org Cc: amd-gfx@lists.freedesktop.org Cc: linux-fbdev@vger.kernel.org Cc: <stable@vger.kernel.org> # v2.6.34+ Link: https://patch.msgid.link/20251105161549.98836-1-tzimmermann@suse.de Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-12-07net: dsa: microchip: Fix symetry in ksz_ptp_msg_irq_{setup/free}()Bastien Curutchet (Schneider Electric)1-11/+7
[ Upstream commit d0b8fec8ae50525b57139393d0bb1f446e82ff7e ] The IRQ numbers created through irq_create_mapping() are only assigned to ptpmsg_irq[n].num at the end of the IRQ setup. So if an error occurs between their creation and their assignment (for instance during the request_threaded_irq() step), we enter the error path and fail to release the newly created virtual IRQs because they aren't yet assigned to ptpmsg_irq[n].num. Move the mapping creation to ksz_ptp_msg_irq_setup() to ensure symetry with what's released by ksz_ptp_msg_irq_free(). In the error path, move the irq_dispose_mapping to the out_ptp_msg label so it will be called only on created IRQs. Cc: stable@vger.kernel.org Fixes: cc13ab18b201 ("net: dsa: microchip: ptp: enable interrupt for timestamping") Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com> Link: https://patch.msgid.link/20251120-ksz-fix-v6-5-891f80ae7f8f@bootlin.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-12-07usb: gadget: udc: fix use-after-free in usb_gadget_state_workJimmy Hu1-1/+16
[ Upstream commit baeb66fbd4201d1c4325074e78b1f557dff89b5b ] A race condition during gadget teardown can lead to a use-after-free in usb_gadget_state_work(), as reported by KASAN: BUG: KASAN: invalid-access in sysfs_notify+0x2c/0xd0 Workqueue: events usb_gadget_state_work The fundamental race occurs because a concurrent event (e.g., an interrupt) can call usb_gadget_set_state() and schedule gadget->work at any time during the cleanup process in usb_del_gadget(). Commit 399a45e5237c ("usb: gadget: core: flush gadget workqueue after device removal") attempted to fix this by moving flush_work() to after device_del(). However, this does not fully solve the race, as a new work item can still be scheduled *after* flush_work() completes but before the gadget's memory is freed, leading to the same use-after-free. This patch fixes the race condition robustly by introducing a 'teardown' flag and a 'state_lock' spinlock to the usb_gadget struct. The flag is set during cleanup in usb_del_gadget() *before* calling flush_work() to prevent any new work from being scheduled once cleanup has commenced. The scheduling site, usb_gadget_set_state(), now checks this flag under the lock before queueing the work, thus safely closing the race window. Fixes: 5702f75375aa9 ("usb: gadget: udc-core: move sysfs_notify() to a workqueue") Cc: stable <stable@kernel.org> Signed-off-by: Jimmy Hu <hhhuuu@google.com> Link: https://patch.msgid.link/20251023054945.233861-1-hhhuuu@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-12-07usb: udc: Add trace event for usb_gadget_set_stateKuen-Han Tsai2-0/+6
[ Upstream commit 7bf1158514e410310aec975e630cec99d4e4092f ] While the userspace program can be notified of gadget state changes, timing issue can lead to missed transitions when reading the state value. Introduce a trace event for usb_gadget_set_state to reliably track state transitions. Signed-off-by: Kuen-Han Tsai <khtsai@google.com> Link: https://lore.kernel.org/r/20250818082722.2952867-1-khtsai@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Stable-dep-of: baeb66fbd420 ("usb: gadget: udc: fix use-after-free in usb_gadget_state_work") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-12-07can: rcar_canfd: Fix CAN-FD mode as defaultBiju Das1-23/+30
[ Upstream commit 6d849ff573722afcf5508d2800017bdd40f27eb9 ] The commit 5cff263606a1 ("can: rcar_canfd: Fix controller mode setting") has aligned with the flow mentioned in the hardware manual for all SoCs except R-Car Gen3 and RZ/G2L SoCs. On R-Car Gen4 and RZ/G3E SoCs, due to the wrong logic in the commit[1] sets the default mode to FD-Only mode instead of CAN-FD mode. This patch sets the CAN-FD mode as the default for all SoCs by dropping the rcar_canfd_set_mode() as some SoC requires mode setting in global reset mode, and the rest of the SoCs in channel reset mode and update the rcar_canfd_reset_controller() to take care of these constraints. Moreover, the RZ/G3E and R-Car Gen4 SoCs support 3 modes compared to 2 modes on the R-Car Gen3. Use inverted logic in rcar_canfd_reset_controller() to simplify the code later to support FD-only mode. [1] commit 45721c406dcf ("can: rcar_canfd: Add support for r8a779a0 SoC") Fixes: 5cff263606a1 ("can: rcar_canfd: Fix controller mode setting") Cc: stable@vger.kernel.org Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://patch.msgid.link/20251118123926.193445-1-biju.das.jz@bp.renesas.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> [ adapted to use existing is_gen4() helper and RCANFD_GEN4_FDCFG() macro instead of new ch_interface_mode field and fcbase struct ] Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-12-07usb: typec: ucsi: psy: Set max current to zero when disconnectedJameson Thies1-0/+5
[ Upstream commit 23379a17334fc24c4a9cbd9967d33dcd9323cc7c ] The ucsi_psy_get_current_max function defaults to 0.1A when it is not clear how much current the partner device can support. But this does not check the port is connected, and will report 0.1A max current when nothing is connected. Update ucsi_psy_get_current_max to report 0A when there is no connection. Fixes: af833e7f7db3 ("usb: typec: ucsi: psy: Set current max to 100mA for BC 1.2 and Default") Cc: stable@vger.kernel.org Signed-off-by: Jameson Thies <jthies@google.com> Reviewed-by: Benson Leung <bleung@chromium.org> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Tested-by: Kenneth R. Crudup <kenny@panix.com> Rule: add Link: https://lore.kernel.org/stable/20251017000051.2094101-1-jthies%40google.com Link: https://patch.msgid.link/20251106011446.2052583-1-jthies@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> [ adapted UCSI_CONSTAT() macro to direct flag access ] Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-12-07staging: rtl8712: Remove driver using deprecated API wextPhilipp Hortmann103-27520/+0
commit 41e883c137ebe6eec042658ef750cbb0529f6ca8 upstream. This driver is in the staging area since 2010. The following reasons lead to the removal: - This driver generates maintenance workload for itself and for API wext - A MAC80211 driver was available in 2016 time frame; This driver does not compile anymore but would be a better starting point than the current driver. Here the note from the TODO file: A replacement for this driver with MAC80211 support is available at https://github.com/chunkeey/rtl8192su - no progress changing to mac80211 - Using this hardware is security wise not state of the art as WPA3 is not supported. Find further discussions in the Link below. Link: https://lore.kernel.org/linux-staging/a02e3e0b-8a9b-47d5-87cf-2c957a474daa@gmail.com/T/#t Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> Tested-by: Dominik Karol Piątkowski <dominik.karol.piatkowski@protonmail.com> Link: https://lore.kernel.org/r/20241020144933.10956-1-philipp.g.hortmann@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> [groeck: Resolved conflicts] Signed-off-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/stable/20251204021604.GA843400@ax162/T/#t Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-12-07net: dsa: microchip: Don't free uninitialized ksz_irqBastien Curutchet (Schneider Electric)1-1/+1
commit 25b62cc5b22c45face094ae3e8717258e46d1d19 upstream. If something goes wrong at setup, ksz_irq_free() can be called on uninitialized ksz_irq (for example when ksz_ptp_irq_setup() fails). It leads to freeing uninitialized IRQ numbers and/or domains. Use dsa_switch_for_each_user_port_continue_reverse() in the error path to iterate only over the fully initialized ports. Cc: stable@vger.kernel.org Fixes: cc13ab18b201 ("net: dsa: microchip: ptp: enable interrupt for timestamping") Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com> Link: https://patch.msgid.link/20251120-ksz-fix-v6-3-891f80ae7f8f@bootlin.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-12-07net: dsa: microchip: ptp: Fix checks on irq_find_mapping()Bastien Curutchet (Schneider Electric)1-2/+2
commit 9e059305be41a5bd27e03458d8333cf30d70be34 upstream. irq_find_mapping() returns a positive IRQ number or 0 if no IRQ is found but it never returns a negative value. However, during the PTP IRQ setup, we verify that its returned value isn't negative. Fix the irq_find_mapping() check to enter the error path when 0 is returned. Return -EINVAL in such case. Cc: stable@vger.kernel.org Fixes: cc13ab18b201 ("net: dsa: microchip: ptp: enable interrupt for timestamping") Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com> Link: https://patch.msgid.link/20251120-ksz-fix-v6-2-891f80ae7f8f@bootlin.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-12-07net: dsa: microchip: common: Fix checks on irq_find_mapping()Bastien Curutchet (Schneider Electric)1-4/+4
commit 7b3c09e1667977edee11de94a85e2593a7c15e87 upstream. irq_find_mapping() returns a positive IRQ number or 0 if no IRQ is found but it never returns a negative value. However, on each irq_find_mapping() call, we verify that the returned value isn't negative. Fix the irq_find_mapping() checks to enter error paths when 0 is returned. Return -EINVAL in such cases. CC: stable@vger.kernel.org Fixes: c9cd961c0d43 ("net: dsa: microchip: lan937x: add interrupt support for port phy link") Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com> Link: https://patch.msgid.link/20251120-ksz-fix-v6-1-891f80ae7f8f@bootlin.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-12-07drm/amd/display: Don't change brightness for disabled connectorsMario Limonciello (AMD)1-0/+15
commit 81f4d4ba509522596143fd5d7dc2fc3495296b0a upstream. [WHY] When a laptop lid is closed the connector is disabled but userspace can still try to change brightness. This doesn't work because the panel is turned off. It will eventually time out, but there is a lot of stutter along the way. [How] Iterate all connectors to check whether the matching one for the backlight index is enabled. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4675 Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Ray Wu <ray.wu@amd.com> Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit f6eeab30323d1174a4cc022e769d248fe8241304) Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-12-07drm/amd/display: Check NULL before accessingAlex Hung1-3/+8
commit 3ce62c189693e8ed7b3abe551802bbc67f3ace54 upstream. [WHAT] IGT kms_cursor_legacy's long-nonblocking-modeset-vs-cursor-atomic fails with NULL pointer dereference. This can be reproduced with both an eDP panel and a DP monitors connected. BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: Oops: 0000 [#1] SMP NOPTI CPU: 13 UID: 0 PID: 2960 Comm: kms_cursor_lega Not tainted 6.16.0-99-custom #8 PREEMPT(voluntary) Hardware name: AMD ........ RIP: 0010:dc_stream_get_scanoutpos+0x34/0x130 [amdgpu] Code: 57 4d 89 c7 41 56 49 89 ce 41 55 49 89 d5 41 54 49 89 fc 53 48 83 ec 18 48 8b 87 a0 64 00 00 48 89 75 d0 48 c7 c6 e0 41 30 c2 <48> 8b 38 48 8b 9f 68 06 00 00 e8 8d d7 fd ff 31 c0 48 81 c3 e0 02 RSP: 0018:ffffd0f3c2bd7608 EFLAGS: 00010292 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffd0f3c2bd7668 RDX: ffffd0f3c2bd7664 RSI: ffffffffc23041e0 RDI: ffff8b32494b8000 RBP: ffffd0f3c2bd7648 R08: ffffd0f3c2bd766c R09: ffffd0f3c2bd7760 R10: ffffd0f3c2bd7820 R11: 0000000000000000 R12: ffff8b32494b8000 R13: ffffd0f3c2bd7664 R14: ffffd0f3c2bd7668 R15: ffffd0f3c2bd766c FS: 000071f631b68700(0000) GS:ffff8b399f114000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000001b8105000 CR4: 0000000000f50ef0 PKRU: 55555554 Call Trace: <TASK> dm_crtc_get_scanoutpos+0xd7/0x180 [amdgpu] amdgpu_display_get_crtc_scanoutpos+0x86/0x1c0 [amdgpu] ? __pfx_amdgpu_crtc_get_scanout_position+0x10/0x10[amdgpu] amdgpu_crtc_get_scanout_position+0x27/0x50 [amdgpu] drm_crtc_vblank_helper_get_vblank_timestamp_internal+0xf7/0x400 drm_crtc_vblank_helper_get_vblank_timestamp+0x1c/0x30 drm_crtc_get_last_vbltimestamp+0x55/0x90 drm_crtc_next_vblank_start+0x45/0xa0 drm_atomic_helper_wait_for_fences+0x81/0x1f0 ... Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 621e55f1919640acab25383362b96e65f2baea3c) Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-12-07drm/amd/amdgpu: reserve vm invalidation engine for uni_mesMichael Chen1-0/+3
commit 971fb57429df5aa4e6efc796f7841e0d10b1e83c upstream. Reserve vm invalidation engine 6 when uni_mes enabled. It is used in processing tlb flush request from host. Signed-off-by: Michael Chen <michael.chen@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Shaoyun liu <Shaoyun.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 873373739b9b150720ea2c5390b4e904a4d21505) Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2026-03-25 01:21:19 +0000