| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
commit 095a8b0ad3c3b5cdc3850d961adb8a8f735220bb upstream.
RDNA4 (GFX 12) hardware removes the GDS, GWS, and OA on-chip memory
resources. The gfx_v12_0 initialisation code correctly leaves
adev->gds.gds_size, adev->gds.gws_size, and adev->gds.oa_size at
zero to reflect this.
amdgpu_ttm_init() unconditionally calls amdgpu_ttm_init_on_chip() for
each of these resources regardless of size. When the size is zero,
amdgpu_ttm_init_on_chip() forwards the call to ttm_range_man_init(),
which calls drm_mm_init(mm, 0, 0). drm_mm_init() immediately fires
DRM_MM_BUG_ON(start + size <= start) -- trivially true when size is
zero -- crashing the kernel during modprobe of amdgpu on an RX 9070 XT.
Guard against this by returning 0 early from
amdgpu_ttm_init_on_chip() when size_in_page is zero. This skips TTM
resource manager registration for hardware resources that are absent,
without affecting any other GPU type.
DRM_MM_BUG_ON() only asserts if CONFIG_DRM_DEBUG_MM is enabled in
the kernel config. This is apparently rarely enabled as these chips
have been in the market for over a year and this issue was only reported
now.
Link: https://lore.kernel.org/all/bug-221376-2300@https.bugzilla.kernel.org%2F/
Link: https://bugzilla.kernel.org/show_bug.cgi?id=221376
Oops-Analysis: http://oops.fenrus.org/reports/bugzilla.korg/221376/report.html
Assisted-by: GitHub Copilot:Claude Sonnet 4.6 linux-kernel-oops-x86.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 5719ce5865279cad4fd5f01011fe037168503f2d)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2884bf72fb8f03409e423397319205de48adca16 upstream.
bond_xmit_broadcast() reuses the original skb for the last slave
(determined by bond_is_last_slave()) and clones it for others.
Concurrent slave enslave/release can mutate the slave list during
RCU-protected iteration, changing which slave is "last" mid-loop.
This causes the original skb to be double-consumed (double-freed).
Replace the racy bond_is_last_slave() check with a simple index
comparison (i + 1 == slaves_count) against the pre-snapshot slave
count taken via READ_ONCE() before the loop. This preserves the
zero-copy optimization for the last slave while making the "last"
determination stable against concurrent list mutations.
The UAF can trigger the following crash:
==================================================================
BUG: KASAN: slab-use-after-free in skb_clone
Read of size 8 at addr ffff888100ef8d40 by task exploit/147
CPU: 1 UID: 0 PID: 147 Comm: exploit Not tainted 7.0.0-rc3+ #4 PREEMPTLAZY
Call Trace:
<TASK>
dump_stack_lvl (lib/dump_stack.c:123)
print_report (mm/kasan/report.c:379 mm/kasan/report.c:482)
kasan_report (mm/kasan/report.c:597)
skb_clone (include/linux/skbuff.h:1724 include/linux/skbuff.h:1792 include/linux/skbuff.h:3396 net/core/skbuff.c:2108)
bond_xmit_broadcast (drivers/net/bonding/bond_main.c:5334)
bond_start_xmit (drivers/net/bonding/bond_main.c:5567 drivers/net/bonding/bond_main.c:5593)
dev_hard_start_xmit (include/linux/netdevice.h:5325 include/linux/netdevice.h:5334 net/core/dev.c:3871 net/core/dev.c:3887)
__dev_queue_xmit (include/linux/netdevice.h:3601 net/core/dev.c:4838)
ip6_finish_output2 (include/net/neighbour.h:540 include/net/neighbour.h:554 net/ipv6/ip6_output.c:136)
ip6_finish_output (net/ipv6/ip6_output.c:208 net/ipv6/ip6_output.c:219)
ip6_output (net/ipv6/ip6_output.c:250)
ip6_send_skb (net/ipv6/ip6_output.c:1985)
udp_v6_send_skb (net/ipv6/udp.c:1442)
udpv6_sendmsg (net/ipv6/udp.c:1733)
__sys_sendto (net/socket.c:730 net/socket.c:742 net/socket.c:2206)
__x64_sys_sendto (net/socket.c:2209)
do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
</TASK>
Allocated by task 147:
Freed by task 147:
The buggy address belongs to the object at ffff888100ef8c80
which belongs to the cache skbuff_head_cache of size 224
The buggy address is located 192 bytes inside of
freed 224-byte region [ffff888100ef8c80, ffff888100ef8d60)
Memory state around the buggy address:
ffff888100ef8c00: fb fb fb fb fc fc fc fc fc fc fc fc fc fc fc fc
ffff888100ef8c80: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff888100ef8d00: fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
^
ffff888100ef8d80: fc fc fc fc fc fc fc fc fa fb fb fb fb fb fb fb
ffff888100ef8e00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================
Fixes: 4e5bd03ae346 ("net: bonding: fix bond_xmit_broadcast return value error bug")
Reported-by: Weiming Shi <bestswngs@gmail.com>
Signed-off-by: Xiang Mei <xmei5@asu.edu>
Link: https://patch.msgid.link/20260326075553.3960562-1-xmei5@asu.edu
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Kevin Berry <kpberry@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit db357034f7e0cf23f233f414a8508312dfe8fbbe ]
Make sure to call controller cleanup() if spi_setup() fails while
registering a device to avoid leaking any resources allocated by
setup().
Fixes: c7299fea6769 ("spi: Fix spi device unregister flow")
Cc: stable@vger.kernel.org # 5.13
Cc: Saravana Kannan <saravanak@kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260410154907.129248-2-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit aac0a51b16700b403a55b67ba495de021db78763 ]
When device_property_read_string() fails, str is left uninitialized
but the code falls through to strcmp(str, ...), dereferencing a garbage
pointer. Replace manual read/strcmp with
device_property_match_property_string() and consolidate the SE mode
enums into a single sequential enum, mapping to hardware register
values via a switch consistent with other bitfields in the driver.
Several cleanup patches have been applied to this driver recently so
this will need a manual backport.
Fixes: da35a7b526d9 ("iio: frequency: admv1013: add support for ADMV1013")
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit e61b5bb0e91390adee41eaddc0a1a7d55d5652b2 ]
Introduce a local struct device pointer in functions that reference
&spi->dev for device-managed resource calls and device property reads,
improving code readability.
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Stable-dep-of: aac0a51b1670 ("iio: frequency: admv1013: fix NULL pointer dereference on str")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit dbeb256e8dd87233d891b170c0b32a6466467036 ]
When an RSS QP is destroyed (e.g. DPDK exit), mana_ib_destroy_qp_rss()
destroys the RX WQ objects but does not disable vPort RX steering in
firmware. This leaves stale steering configuration that still points to
the destroyed RX objects.
If traffic continues to arrive (e.g. peer VM is still transmitting) and
the VF interface is subsequently brought up (mana_open), the firmware
may deliver completions using stale CQ IDs from the old RX objects.
These CQ IDs can be reused by the ethernet driver for new TX CQs,
causing RX completions to land on TX CQs:
WARNING: mana_poll_tx_cq+0x1b8/0x220 [mana] (is_sq == false)
WARNING: mana_gd_process_eq_events+0x209/0x290 (cq_table lookup fails)
Fix this by disabling vPort RX steering before destroying RX WQ objects.
Note that mana_fence_rqs() cannot be used here because the fence
completion is delivered on the CQ, which is polled by user-mode (e.g.
DPDK) and not visible to the kernel driver.
Refactor the disable logic into a shared mana_disable_vport_rx() in
mana_en, exported for use by mana_ib, replacing the duplicate code.
The ethernet driver's mana_dealloc_queues() is also updated to call
this common function.
Fixes: 0266a177631d ("RDMA/mana_ib: Add a driver for Microsoft Azure Network Adapter")
Cc: stable@vger.kernel.org
Signed-off-by: Long Li <longli@microsoft.com>
Link: https://patch.msgid.link/20260325194100.1929056-1-longli@microsoft.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
[ kept early-return error handling and used unquoted NET_MANA namespace in EXPORT_SYMBOL_NS ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit eac69475b01fe1e861dfe3960b57fa95671c132e ]
In a control request, the USB request structure
can be subject to DMA on some HCs. Hence it must obey
the rules for DMA coherency. Allocate it separately.
Fixes: b1c97193c6437 ("[media] rc: port IgorPlug-USB to rc-core")
Cc: stable@vger.kernel.org
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
[ replaced kzalloc_obj(*ir->request, GFP_KERNEL) with kzalloc(sizeof(*ir->request), GFP_KERNEL) ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 50acaad3d202c064779db8dc3d010007347f59c7 ]
Buffers must not share a cache line with other data structures.
Allocate separately.
Fixes: 0938069fa0897 ("[media] rc: Add support for the TechnoTrend USB IR Receiver")
Cc: stable@vger.kernel.org
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
[ kept kzalloc(sizeof(*tt), GFP_KERNEL) instead of kzalloc_obj() ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit ae5e95d4157481693be2317e3ffcd84e36010cbb ]
The mwifiex_adapter_cleanup() function uses timer_delete()
(non-synchronous) for the wakeup_timer before the adapter structure is
freed. This is incorrect because timer_delete() does not wait for any
running timer callback to complete.
If the wakeup_timer callback (wakeup_timer_fn) is executing when
mwifiex_adapter_cleanup() is called, the callback will continue to
access adapter fields (adapter->hw_status, adapter->if_ops.card_reset,
etc.) which may be freed by mwifiex_free_adapter() called later in the
mwifiex_remove_card() path.
Use timer_delete_sync() instead to ensure any running timer callback has
completed before returning.
Fixes: 4636187da60b ("mwifiex: add wakeup timer based recovery mechanism")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Hodges <git@danielhodges.dev>
Link: https://patch.msgid.link/20260206194401.2346-1-git@danielhodges.dev
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
[ changed `timer_delete_sync()` to `del_timer_sync()` ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 56154fef47d104effa9f29ed3db4f805cbc0d640 ]
mt7925u uses different reset/status registers from mt7921u. Reusing the
mt7921u register set causes the WFSYS reset to fail.
Add a chip-specific descriptor in mt792xu_wfsys_reset() to select the
correct registers and fix mt7925u failing to initialize after a warm
reboot.
Fixes: d28e1a48952e ("wifi: mt76: mt792x: introduce mt792x-usb module")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Link: https://patch.msgid.link/20260311002825.15502-2-sean.wang@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit e6f48512c1ceebcd1ce6bb83df3b3d56a261507d ]
Prepare mt792xu_wfsys_reset() for chips that share the same USB WFSYS
reset flow but use different register definitions.
This is a pure refactor of the current mt7921u path and keeps the reset
sequence unchanged.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Link: https://patch.msgid.link/20260311002825.15502-1-sean.wang@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Stable-dep-of: 56154fef47d1 ("wifi: mt76: mt792x: fix mt7925u USB WFSYS reset handling")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 41ff66baf81c6541f4f985dd7eac4494d03d9440 ]
If thermal_zone_device_register_with_trips() fails after adding
a thermal governor to the thermal zone being registered, the
governor is not removed from it as appropriate which may lead to
a memory leak.
In turn, thermal_zone_device_unregister() calls thermal_set_governor()
without acquiring the thermal zone lock beforehand which may race with
a governor update via sysfs and may lead to a use-after-free in that
case.
Address these issues by adding two thermal_set_governor() calls, one to
thermal_release() to remove the governor from the given thermal zone,
and one to the thermal zone registration error path to cover failures
preceding the thermal zone device registration.
Fixes: e33df1d2f3a0 ("thermal: let governors have private data for each thermal zone")
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/5092923.31r3eYUQgx@rafael.j.wysocki
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1e111c4b3a726df1254670a5cc4868cedb946d37 upstream.
If device_add(&sdkp->disk_dev) fails, put_device() runs
scsi_disk_release(), which frees the scsi_disk but leaves the gendisk
referenced. The device_add_disk() error path in sd_probe() calls
put_disk(gd); call put_disk(gd) here to mirror that cleanup.
Fixes: 265dfe8ebbab ("scsi: sd: Free scsi_disk device via put_device()")
Cc: stable@vger.kernel.org
Reviewed-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Yang Xiuwei <yangxiuwei@kylinos.cn>
Link: https://patch.msgid.link/20260330014952.152776-1-yangxiuwei@kylinos.cn
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5e6de34d82b49cab9d8a42063e9cd0f22a4f31e5 upstream.
dst_fetch_ha() checks nud_state without holding the neighbor lock, then
copies ha under the seqlock. A race in __neigh_update() where nud_state
is set to NUD_REACHABLE before ha is written allows dst_fetch_ha() to
read a zero MAC address while the seqlock reports no concurrent writer.
netevent_callback amplifies this by waking ALL pending addr_req workers
when ANY neighbor becomes NUD_VALID. At scale (N peers resolving ARP
concurrently), the hit probability scales as N^2, making it near-certain
for large RDMA workloads.
N(A): neigh_update(A) W(A): addr_resolve(A)
| [sleep]
| write_lock_bh(&A->lock) |
| A->nud_state = NUD_REACHABLE |
| // A->ha is still 0 |
| [woken by netevent_cb() of
| another neighbour]
| | dst_fetch_ha(A)
| | A->nud_state & NUD_VALID
| | read_seqbegin(&A->ha_lock)
| | snapshot = A->ha /* 0 */
| | read_seqretry(&A->ha_lock)
| | return snapshot
| seqlock(&A->ha_lock)
| A->ha = mac_A /* too late */
| sequnlock(&A->ha_lock)
| write_unlock_bh(&A->lock)
The incorrect/zero mac is read and programmed in the device QP while it
was not yet updated. This causes silent packet loss and eventual
RETRY_EXC_ERR.
Fix by holding the neighbor read lock across the nud_state check and
ha copy in dst_fetch_ha(), ensuring it synchronizes with
__neigh_update() which is updating while holding the write lock.
Cc: stable@vger.kernel.org
Fixes: 92ebb6a0a13a ("IB/cm: Remove now useless rcu_lock in dst_fetch_ha")
Link: https://patch.msgid.link/r/20260405-fix-dmac-race-v1-1-cfa1ec2ce54a@nvidia.com
Signed-off-by: Chen Zhao <chezhao@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 4c788c6f921b22f9b6c3f316c4a071c05683e7de upstream.
The argument count calculation in create_dirty_log() performs
`*args_used = 2 + param_count` before validating against argc. When a
user provides a param_count close to UINT_MAX via the device mapper
table string, this unsigned addition wraps around to a small value,
causing the subsequent `argc < *args_used` check to be bypassed.
The overflowed param_count is then passed as argc to dm_dirty_log_create(),
where it can cause out-of-bounds reads on the argv array.
Fix by comparing param_count against argc - 2 before performing the
addition, following the same pattern used by parse_features() in the
same file. Since argc >= 2 is already guaranteed, the subtraction is
safe.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Reported-by: Yuhao Jiang <danisjiang@gmail.com>
Signed-off-by: Junrui Luo <moonafterrain@outlook.com>
Reviewed-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b0bfa49c03e3c65737eafa73d8a698eaf55379a6 upstream.
struct nx842_crypto_header is declared with the __packed attribute,
however the fields grouped with struct_group_tagged() were not packed.
This caused the grouped header portion of the structure to lose the
packed layout guarantees of the containing structure.
Fix this by replacing struct_group_tagged() with __struct_group(...,
..., __packed, ...) so the grouped fields are packed, and the original
layout is preserved, restoring the intended packed layout of the
structure.
Before changes:
struct nx842_crypto_header {
union {
struct {
__be16 magic; /* 0 2 */
__be16 ignore; /* 2 2 */
u8 groups; /* 4 1 */
}; /* 0 6 */
struct nx842_crypto_header_hdr hdr; /* 0 6 */
}; /* 0 6 */
struct nx842_crypto_header_group group[]; /* 6 0 */
/* size: 6, cachelines: 1, members: 2 */
/* last cacheline: 6 bytes */
} __attribute__((__packed__));
After changes:
struct nx842_crypto_header {
union {
struct {
__be16 magic; /* 0 2 */
__be16 ignore; /* 2 2 */
u8 groups; /* 4 1 */
} __attribute__((__packed__)); /* 0 5 */
struct nx842_crypto_header_hdr hdr; /* 0 5 */
}; /* 0 5 */
struct nx842_crypto_header_group group[]; /* 5 0 */
/* size: 5, cachelines: 1, members: 2 */
/* last cacheline: 5 bytes */
} __attribute__((__packed__));
Fixes: 1e6b251ce175 ("crypto: nx - Avoid -Wflex-array-member-not-at-end warning")
Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit de4e66b763d1e81188cb2803ec109466582fc9d1 upstream.
Return early if atmel_i2c_send_receive() fails to avoid checking
potentially uninitialized data in 'cmd.data'.
Cc: stable@vger.kernel.org
Fixes: e05ce444e9e5 ("crypto: atmel-sha204a - add reading from otp zone")
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit bab1adf3b87e4bfac92c4f5963c63db434d561c1 upstream.
Unregister the hwrng to prevent new ->read() calls and flush the Atmel
I2C workqueue before teardown to prevent a potential UAF if a queued
callback runs while the device is being removed.
Drop the early return to ensure sysfs entries are removed and
->hwrng.priv is freed, preventing a memory leak.
Fixes: da001fb651b0 ("crypto: atmel-i2c - add support for SHA204A random number generator")
Cc: stable@vger.kernel.org
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 094c276da6a0d4971c3faae09a36b51d096659b2 upstream.
Return -EINVAL from atmel_i2c_init_read_otp_cmd() on invalid addresses
instead of -1. Since the OTP zone is accessed in 4-byte blocks, valid
addresses range from 0 to OTP_ZONE_SIZE / 4 - 1. Fix the bounds check
accordingly.
In atmel_sha204a_otp_read(), propagate the actual error code from
atmel_i2c_init_read_otp_cmd() instead of -1. Also, return -EIO instead
of -EINVAL when the device is not ready.
Cc: stable@vger.kernel.org
Fixes: e05ce444e9e5 ("crypto: atmel-sha204a - add reading from otp zone")
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: Lothar Rubusch <l.rubusch@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c8a9a647532f5c2a04180352693215e24e9dba03 upstream.
Before DMA output is consumed by the CPU, ->dma_addr_out must be synced
with dma_sync_single_for_cpu() instead of dma_sync_single_for_device().
Using the wrong direction can return stale cache data on non-coherent
platforms.
Fixes: 13802005d8f2 ("crypto: atmel - add Atmel DES/TDES driver")
Fixes: 1f858040c2f7 ("crypto: atmel-tdes - add support for latest release of the IP (0x700)")
Cc: stable@vger.kernel.org
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 02c64052fad03699b9c6d1df2f9b444d17e4ac50 upstream.
Add cc_unmap_result() if cc_map_hash_request_final()
fails to prevent potential memory leak.
Fixes: 63893811b0fc ("crypto: ccree - add ahash support")
Cc: stable@vger.kernel.org
Signed-off-by: Haoxiang Li <lihaoxiang@isrc.iscas.ac.cn>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1ee57ab93b75eb59f426aef37b5498a7ffc28278 upstream.
The direction used to map the buffer skreq->iv is DMA_TO_DEVICE but it is
unmapped with direction DMA_BIDIRECTIONAL in the error path.
Change the unmap to match the mapping.
Fixes: 915e4e8413da ("crypto: hisilicon - SEC security accelerator driver")
Cc: <stable@vger.kernel.org>
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Reviewed-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 095d50008d55d13f8fcf1bbeb7c6eba51779bc85 upstream.
Call atmel_ecc_i2c_client_free() to release the I2C client reserved by
atmel_ecc_i2c_client_alloc() when crypto_alloc_kpp() fails. Otherwise
->tfm_count will be out of sync.
Fixes: 11105693fa05 ("crypto: atmel-ecc - introduce Microchip / Atmel ECC driver")
Cc: stable@vger.kernel.org
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3fcfff4ed35f963380a68741bcd52742baff7f76 upstream.
atmel_aes_buff_init() allocates 4 pages using __get_free_pages() with
ATMEL_AES_BUFFER_ORDER, but atmel_aes_buff_cleanup() frees only the
first page using free_page(), leaking the remaining 3 pages. Use
free_pages() with ATMEL_AES_BUFFER_ORDER to fix the memory leak.
Fixes: bbe628ed897d ("crypto: atmel-aes - improve performances of data transfer")
Cc: stable@vger.kernel.org
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit fed4626501c871890da287bec62a96e52da1af89 upstream.
USB drivers bind to USB interfaces and any device managed resources
should have their lifetime tied to the interface rather than parent USB
device. This avoids issues like memory leaks when drivers are unbound
without their devices being physically disconnected (e.g. on probe
deferral or configuration changes).
Fix the control message buffer lifetime so that it is released on driver
unbind.
Fixes: 9f2d3eae88d2 ("can: ucan: add driver for Theobroma Systems UCAN devices")
Cc: stable@vger.kernel.org # 4.19
Cc: Jakob Unterwurzacher <jakob.unterwurzacher@theobroma-systems.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260327104520.1310158-1-johan@kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit cfdb41adf1c2822ad1b1791d4d11093edb5582b6 upstream.
Some modem devices can take significant time (up to 20 secs for sdx75) to
enter mission mode during initialization. Currently, mhi_sync_power_up()
waits for this entire process to complete, blocking other driver probes
and delaying system boot.
Switch to mhi_async_power_up() so probe can return immediately while MHI
initialization continues in the background. This eliminates lengthy boot
delays and allows other drivers to probe in parallel, improving overall
system boot performance.
Fixes: 5571519009d0 ("bus: mhi: host: pci_generic: Add SDX75 based modem support")
Signed-off-by: Qiang Yu <qiang.yu@oss.qualcomm.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260303-b4-async_power_on-v2-1-d3db81eb457d@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit caa5a5d44d8ae4fd13b744857d66c9313b712d1f upstream.
Switch device_set_node to set_primary_fwnode, so that the ACPI fwnode
does not overwrite the of_node with NULL.
This allows MFD children with both OF nodes and ACPI handles to have OF
nodes again.
Cc: stable@vger.kernel.org
Fixes: 51e3b257099d ("mfd: core: Make use of device_set_node()")
Signed-off-by: Brian Mak <makb@juniper.net>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260325223024.35992-1-makb@juniper.net
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f8a2fc809bfeb49130709b31a4d357a049f28547 upstream.
The local variables 'mcs' and 'nss' in rtl8xxxu_update_ra_report() are
passed to rtl8xxxu_desc_to_mcsrate() as output parameters. If the helper
function encounters an unhandled rate index, it may return without setting
these values, leading to the use of uninitialized stack data.
Remove the helper rtl8xxxu_desc_to_mcsrate() and inline the logic into
rtl8xxxu_update_ra_report(). This fixes the use of uninitialized 'mcs'
and 'nss' variables for legacy rates.
The new implementation explicitly handles:
- Legacy rates: Set bitrate only.
- HT rates (MCS0-15): Set MCS flags, index, and NSS (1 or 2) directly.
- Invalid rates: Return early.
Fixes: 7de16123d9e2 ("wifi: rtl8xxxu: Introduce rtl8xxxu_update_ra_report")
Cc: stable@vger.kernel.org
Suggested-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Yi Cong <yicong@kylinos.cn>
Link: https://lore.kernel.org/all/96e31963da0c42dcb52ce44f818963d7@realtek.com/
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260306071627.56501-1-cong.yi@linux.dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1f95a6cd5ad78ed27a31a20cbd1facff6f10b33d upstream.
Some users reported that upon suspending their keyboard backlight
remained on. Fix this by adding the missing LED_CORE_SUSPENDRESUME flag.
Cc: stable@vger.kernel.org
Fixes: 394ba612f941 ("HID: apple: Add support for magic keyboard backlight on T2 Macs")
Fixes: 9018eacbe623 ("HID: apple: Add support for keyboard backlight on certain T2 Macs.")
Reported-by: André Eikmeyer <andre.eikmeyer@gmail.com>
Tested-by: André Eikmeyer <andre.eikmeyer@gmail.com>
Signed-off-by: Aditya Garg <gargaditya08@live.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b0cc3ae97e893bf54bbce447f4e9fd2e0b88bff9 upstream.
r5c_recovery_analyze_meta_block() and
r5l_recovery_verify_data_checksum_for_mb() iterate over payloads in a
journal metadata block using on-disk payload size fields without
validating them against the remaining space in the metadata block.
A corrupted journal contains payload sizes extending beyond the PAGE_SIZE
boundary can cause out-of-bounds reads when accessing payload fields or
computing offsets.
Add bounds validation for each payload type to ensure the full payload
fits within meta_size before processing.
Fixes: b4c625c67362 ("md/r5cache: r5cache recovery: part 1")
Cc: stable@vger.kernel.org
Signed-off-by: Junrui Luo <moonafterrain@outlook.com>
Link: https://lore.kernel.org/linux-raid/SYBPR01MB78815E78D829BB86CD7C8015AF5FA@SYBPR01MB7881.ausprd01.prod.outlook.com/
Signed-off-by: Yu Kuai <yukuai@fnnas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7f9f7c697474268d9ef9479df3ddfe7cdcfbbffc upstream.
When retry_aligned_read() encounters an overlapped stripe, it releases
the stripe via raid5_release_stripe() which puts it on the lockless
released_stripes llist. In the next raid5d loop iteration,
release_stripe_list() drains the stripe onto handle_list (since
STRIPE_HANDLE is set by the original IO), but retry_aligned_read()
runs before handle_active_stripes() and removes the stripe from
handle_list via find_get_stripe() -> list_del_init(). This prevents
handle_stripe() from ever processing the stripe to resolve the
overlap, causing an infinite loop and soft lockup.
Fix this by using __release_stripe() with temp_inactive_list instead
of raid5_release_stripe() in the failure path, so the stripe does not
go through the released_stripes llist. This allows raid5d to break out
of its loop, and the overlap will be resolved when the stripe is
eventually processed by handle_stripe().
Fixes: 773ca82fa1ee ("raid5: make release_stripe lockless")
Cc: stable@vger.kernel.org
Signed-off-by: FengWei Shih <dannyshih@synology.com>
Signed-off-by: Chia-Ming Chang <chiamingc@synology.com>
Link: https://lore.kernel.org/linux-raid/20260402061406.455755-1-chiamingc@synology.com/
Signed-off-by: Yu Kuai <yukuai@fnnas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e90dc3b2d73986610476b02c29d0074aa4d92fb0 upstream.
PCTL0__MMHUB_DEEPSLEEP_IB is 0x69004 on MMHUB 4,1,0 and
and 0x60804 on MMHUB 4,2,0. 0x62a04 is on MMHUB 1,8,0/1.
The DS bits are adjusted to cover more JPEG engines and MMHUB
version.
Signed-off-by: David (Ming Qiang) Wu <David.Wu3@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a0f64241d3566a49c0a9b33ba7ae458ae22003a9 upstream.
When writing to SST flash starting at an odd address, a single byte is
first programmed using the byte program (BP) command. After this
operation completes, the flash hardware automatically clears the Write
Enable Latch (WEL) bit.
If an AAI (Auto Address Increment) word program sequence follows, it
requires WEL to be set. Without re-enabling writes, the AAI sequence
fails.
Add spi_nor_write_enable() after the odd-address byte program when more
data needs to be written. Use a local boolean for clarity.
Fixes: b199489d37b2 ("mtd: spi-nor: add the framework for SPI NOR")
Cc: stable@vger.kernel.org
Signed-off-by: Sanjaikumar V S <sanjaikumar.vs@dicortech.com>
Tested-by: Hendrik Donner <hd@os-cillation.de>
Reviewed-by: Hendrik Donner <hd@os-cillation.de>
Signed-off-by: Pratyush Yadav (Google) <pratyush@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 30c4d2f26bb3538c328035cea2e6265c8320539e upstream.
The driver reuses the OF node of the parent multi-function device but
fails to take another reference to balance the one dropped by the
platform bus code when unbinding the MFD and deregistering the child
devices.
Fix this by using the intended helper for reusing OF nodes.
Fixes: 435af89786c6 ("rtc: New driver for RTC in Netronix embedded controller")
Cc: stable@vger.kernel.org # 5.13
Cc: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260407122717.2676774-1-johan@kernel.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 949692da7211572fac419b2986b6abc0cd1aeb76 upstream.
tpm_tis_send_main() will attempt to retry sending data TPM_RETRY times.
Currently, if those retries are exhausted, the driver will attempt to
call execute. The TPM will be in the wrong state, leading to the
operation simply timing out.
Instead, if there is still an error after retries are exhausted, return
that error immediately.
Cc: stable@vger.kernel.org # v6.6+
Fixes: 280db21e153d8 ("tpm_tis: Resend command to recover from data transfer errors")
Signed-off-by: Jacqueline Wong <jacqwong@google.com>
Signed-off-by: Jordan Hand <jhand@google.com>
Link: https://lore.kernel.org/r/20260415160006.2275325-3-jacqwong@google.com
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0471921e2d1043dcc6de5cffb49dd37709521abe upstream.
Add logging to more easily determine reason for transmit failure
Cc: stable@vger.kernel.org # v6.6+
Fixes: 280db21e153d8 ("tpm_tis: Resend command to recover from data transfer errors")
Signed-off-by: Jacqueline Wong <jacqwong@google.com>
Signed-off-by: Jordan Hand <jhand@google.com>
Link: https://lore.kernel.org/r/20260415160006.2275325-2-jacqwong@google.com
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c424d2664f08c77f08b4580b5f0cbaabf7c229b2 upstream.
tpm_dev_release() uses plain kfree() to free chip->auth, which contains
sensitive cryptographic material including HMAC session keys, nonces,
and passphrase data (struct tpm2_auth).
Every other code path that frees this structure uses kfree_sensitive()
to zero the memory before releasing it: both tpm2_end_auth_session()
and tpm_buf_check_hmac_response() do so. The tpm_dev_release() path
is the only one that does not, leaving key material in freed slab
memory until it is eventually overwritten.
Use kfree_sensitive() for consistency with the rest of the driver and
to ensure session keys are scrubbed during device teardown.
Cc: stable@vger.kernel.org # v6.10+
Fixes: 699e3efd6c64 ("tpm: Add HMAC session start and end functions")
Signed-off-by: Gunnar Kudrjavets <gunnarku@amazon.com>
Reviewed-by: Justinien Bouron <jbouron@amazon.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 666c1a2ca603d8314231200bf8bbb3a81bd64c6b upstream.
When tpm_buf_fill_hmac_session() fails inside the do-while loop in
tpm2_get_random(), the function returns directly after destroying the
buffer, without ending the auth session via tpm2_end_auth_session().
This leaks the TPM auth session resource. All other error paths within
the loop correctly reach the 'out' label which calls both
tpm_buf_destroy() and tpm2_end_auth_session().
Fix this by replacing the early return with a goto to the existing 'out'
label, which already handles both cleanup operations. The redundant
tpm_buf_destroy() call is removed since 'out' takes care of it.
Cc: stable@vger.kernel.org # v6.19+
Fixes: 6e9722e9a7bf ("tpm2-sessions: Fix out of range indexing in name_size")
Signed-off-by: Gunnar Kudrjavets <gunnarku@amazon.com>
Reviewed-by: Justinien Bouron <jbouron@amazon.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3962c24f2d14e8a7f8a23f56b7ce320523947342 upstream.
On a soft reset TPM PWM IP may preserve its internal state from previous
runtime, therefore on a subsequent OS boot and driver probe
"enable_count" value and TPM PWM IP internal channels "enabled" states
may get unaligned. In consequence on a suspend/resume cycle the call "if
(--tpm->enable_count == 0)" may lead to "enable_count" overflow the
system being blocked from entering suspend due to:
if (tpm->enable_count > 0)
return -EBUSY;
Fix the problem by counting the enabled channels in probe function.
Signed-off-by: Viorel Suman (OSS) <viorel.suman@oss.nxp.com>
Fixes: 738a1cfec2ed ("pwm: Add i.MX TPM PWM driver support")
Link: https://patch.msgid.link/20260311123309.348904-1-viorel.suman@oss.nxp.com
Cc: stable@vger.kernel.org
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a1b80018b8cec27fc06a8b04a7f8b5f6cfe86eae upstream.
Previous commit introduces a new last_request variable in the context
structure.
Renaming the first/last existing member variable in the context
structure to improve readability.
Cc: stable@vger.kernel.org
Signed-off-by: Paul Louvel <paul.louvel@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 655ef638a2bc3cd0a9eff99a02f83cab94a3a917 upstream.
Since commit c662b043cdca ("crypto: af_alg/hash: Support
MSG_SPLICE_PAGES"), the crypto core may pass large scatterlists spanning
multiple pages to drivers supporting ahash operations. As a result, a
driver can now receive large ahash requests.
The SEC1 engine has a limitation where a single descriptor cannot
process more than 32k of data. The current implementation attempts to
handle the entire request within a single descriptor, which leads to
failures raised by the driver:
"length exceeds h/w max limit"
Address this limitation by splitting large ahash requests into multiple
descriptors, each respecting the 32k hardware limit. This allows
processing arbitrarily large requests.
Cc: stable@vger.kernel.org
Fixes: c662b043cdca ("crypto: af_alg/hash: Support MSG_SPLICE_PAGES")
Signed-off-by: Paul Louvel <paul.louvel@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5cd28bd28c8ce426b56ce4230dbd17537181d5ad upstream.
The native driver takes over the framebuffer aperture by removing the
system- framebuffer platform device. Afterwards the pointer in drvdata
is dangling. Remove the entire logic around drvdata and let the kernel's
aperture helpers handle this. The platform device depends on the native
hardware device instead of the coreboot device anyway.
When commit 851b4c14532d ("firmware: coreboot: Add coreboot framebuffer
driver") added the coreboot framebuffer code, the kernel did not support
device-based aperture management. Instead native driviers only removed
the conflicting fbdev device. At that point, unregistering the framebuffer
device most likely worked correctly. It was definitely broken after
commit d9702b2a |
