| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
[ Upstream commit ccb7bb13c00bcc3178d270da052635c56148bc16 ]
The sdw_dev_lock protects the SoundWire driver callbacks against
the probed flag, which is used to skip the callbacks if the
driver gets removed. For more information see commit bd29c00edd0a
("soundwire: revisit driver bind/unbind and callbacks").
However, this lock is a frequent source of mutex inversions.
Many audio operations eventually hit the hardware resulting in a
SoundWire callback, this means that typically the driver has the
locking order ALSA/ASoC locks -> sdw_dev_lock. Conversely, the IRQ
comes in directly from the SoundWire hardware, but then will often
want to access ALSA/ASoC, such as updating something in DAPM or
an ALSA control. This gives the other lock order sdw_dev_lock ->
ALSA/ASoC locks.
When the IRQ handling was initially added to SoundWire this was
through a callback mechanism. As such it required being covered by
the lock because the callbacks are part of the sdw_driver structure
and are thus present regardless of if the driver is currently
probed.
Since then a newer mechanism using the IRQ framework has been
added, which is currently covered by the same lock but this isn't
actually required. Handlers for the IRQ framework are registered in
probe and should by released during remove, thus the IRQ framework
will have already unbound the IRQ before the slave driver is
removed. Avoid the aforementioned mutex inversion by moving the
handle_nested_irq call outside of the sdw_dev_lock.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20250609143041.495049-3-ckeepax@opensource.cirrus.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
sequence
[ Upstream commit f93b697ed98e3c85d1973ea170d4f4e7a6b2b45d ]
During remove sequence, cancel the pending slave status update workqueue.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20250530054447.1645807-4-Vijendar.Mukunda@amd.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 03837341790039d6f1cbf7a1ae7dfa2cb77ef0a4 ]
During pm_prepare callback, pm_request_resume() delays SoundWire manager D0
entry sequence. Synchronize runtime resume sequence for amd_manager
instance prior to invoking child devices resume sequence for both the amd
power modes(ClockStop Mode and Power off mode).
Change the power_mode_mask check and use pm_runtime_resume() in
amd_pm_prepare() callback.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20250530054447.1645807-3-Vijendar.Mukunda@amd.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2f96afdffad4ef74e3c511207058c41c54a2d014 ]
Since the sibling data is filled after the priv->clks[] array entry is
populated, the first clock that is probed and has a sibling will
temporarily behave as its own sibling until its actual sibling is
populated. To avoid any issues, postpone updating priv->clks[] until after
the sibling is populated.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250514090415.4098534-2-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit aaeff14688d0254b39731d9bb303c79bfd610f7d ]
The bootloader info reg for pspv6 is the same as pspv4 and pspv5.
Suggested-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2157e50f65d2030f07ea27ef7ac4cfba772e98ac ]
Adds timeout to exit from possible infinite loop, which polls
on CPT instruction(load_fvc) completion.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: Bharat Bhushan <bbhushan2@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9764401bf6f8a20eb11c2e78470f20fee91a9ea7 ]
Some broken device return wrong dwMaxPayloadTransferSize fields as
follows:
[ 218.632537] uvcvideo: Device requested 2752512 B/frame bandwidth.
[ 218.632598] uvcvideo: No fast enough alt setting for requested bandwidth.
When dwMaxPayloadTransferSize is greater than maxpsize, it will prevent
the camera from starting. So use the bandwidth of maxpsize.
Signed-off-by: chenchangcheng <chenchangcheng@kylinos.cn>
Reviewed-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20250510061803.811433-1-ccc194101@163.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 649c033711d7fd6e1d5d69e4cfc3fceca7de2867 ]
To implement VIDIOC_QUERYCTRL, we need to know the minimum, maximum,
step and flags of the control. For some of the controls, this involves
querying the actual hardware.
Some non-compliant cameras produce errors when we query them. These
error can be triggered every time, sometimes, or when other controls do
not have the "right value". Right now, we populate that error to userspace.
When an error happens, the v4l2 framework does not copy the v4l2_queryctrl
struct to userspace. Also, userspace apps are not ready to handle any
other error than -EINVAL.
One of the main usecases of VIDIOC_QUERYCTRL is enumerating the controls
of a device. This is done using the V4L2_CTRL_FLAG_NEXT_CTRL flag. In
that usecase, a non-compliant control will make it almost impossible to
enumerate all controls of the device.
A control with an invalid max/min/step/flags is better than non being
able to enumerate the rest of the controls.
This patch:
- Retries for an extra attempt to read the control, to avoid spurious
errors. More attempts do not seem to produce better results in the
tested hardware.
- Makes VIDIOC_QUERYCTRL return 0 for -EIO errors.
- Introduces a warning in dmesg so we can have a trace of what has happened
and sets the V4L2_CTRL_FLAG_DISABLED.
- Makes sure we keep returning V4L2_CTRL_FLAG_DISABLED for all the next
attempts to query that control (other operations have the same
functionality as now).
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Link: https://lore.kernel.org/r/20250502-uvc-eaccess-v8-1-0b8b58ac1142@chromium.org
Signed-off-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 53b0b80e5240fec7c5a420bffb310edc83faf4fd ]
HP Webcam HD 2300 does not seem to flip the FID bit according to spec.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 239 Miscellaneous Device
bDeviceSubClass 2 [unknown]
bDeviceProtocol 1 Interface Association
bMaxPacketSize0 64
idVendor 0x03f0 HP, Inc
idProduct 0xe207 HP Webcam HD 2300
bcdDevice 10.20
iManufacturer 3 Hewlett Packard
iProduct 1 HP Webcam HD 2300
iSerial 0
bNumConfigurations 1
Reported-by: Michaël Melchiore <rohel01@gmail.com>
Closes: https://lore.kernel.org/linux-media/CA+q66aRvTigH15cUyfvzPJ2mfsDFMt=CjuYNwvAZb29w8b1KDA@mail.gmail.com
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20250602-uvc-hp-quirk-v1-1-7047d94d679f@chromium.org
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
w7090p_tuner_write_serpar and w7090p_tuner_read_serpar
[ Upstream commit ed0234c8458b3149f15e496b48a1c9874dd24a1b ]
In w7090p_tuner_write_serpar, msg is controlled by user. When msg[0].buf is null and msg[0].len is zero, former checks on msg[0].buf would be passed. If accessing msg[0].buf[2] without sanity check, null pointer deref would happen. We add
check on msg[0].len to prevent crash.
Similar commit: commit 0ed554fd769a ("media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()")
Signed-off-by: Alex Guo <alexguo1023@gmail.com>
Link: https://lore.kernel.org/r/20250616013353.738790-1-alexguo1023@gmail.com
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ce5cac69b2edac3e3246fee03e8f4c2a1075238b ]
In dib7090p_rw_on_apb, msg is controlled by user. When msg[0].buf is null and
msg[0].len is zero, former checks on msg[0].buf would be passed. If accessing
msg[0].buf[2] without sanity check, null pointer deref would happen. We add
check on msg[0].len to prevent crash. Similar issue occurs when access
msg[1].buf[0] and msg[1].buf[1].
Similar commit: commit 0ed554fd769a ("media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()")
Signed-off-by: Alex Guo <alexguo1023@gmail.com>
Link: https://lore.kernel.org/r/20250616013231.730221-1-alexguo1023@gmail.com
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b5ae5a79825ba8037b0be3ef677a24de8c063abf ]
This driver passes the length of an i2c_msg directly to
usb_control_msg(). If the message is now a read and of length 0, it
violates the USB protocol and a warning will be printed. Enable the
I2C_AQ_NO_ZERO_LEN_READ quirk for this adapter thus forbidding 0-length
read messages altogether.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 86addd25314a1e77dbdcfddfeed0bab2f27da0e2 ]
The existing fixed value of 16 worked for UYVY 720P60 over
2 lanes at 594MHz, or UYVY 1080P60 over 4 lanes. (RGB888
1080P60 needs 6 lanes at 594MHz).
It doesn't allow for lower resolutions to work as the FIFO
underflows.
374 is required for 1080P24 or 1080P30 UYVY over 2 lanes @
972Mbit/s, but >374 means that the FIFO underflows on 1080P50
UYVY over 2 lanes @ 972Mbit/s.
Whilst it would be nice to compute it, the required information
isn't published by Toshiba.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 377cc006a364dfdab2f3f221cfad63a9265200b8 ]
When calling tc358743_set_fmt, the code was calling tc358743_get_fmt
to choose a valid format. However that sets the colorspace
based on information read back from the chip, not the colour
format requested.
The result was that if you called try or set format for UYVY
when the current format was RGB3 then you would get told SRGB,
and try RGB3 when current was UYVY and you would get told
SMPTE170M.
The value programmed in the VI_REP register for the colorspace
is always set by this driver, therefore there is no need to read
back the value, and never set to REC709.
Return the colorspace based on the format set/tried instead.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 303d81635e1d9c949b370215cc94526ed81f2e3d ]
The probe for the TC358743 reads the CHIPID register from
the device and compares it to the expected value of 0.
If the I2C request fails then that also returns 0, so
the driver loads thinking that the device is there.
Generally I2C communications are reliable so there is
limited need to check the return value on every transfer,
therefore only amend the one read during probe to check
for I2C errors.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 57b5a302b5d529db96ddc52fbccec005092ebb3d ]
The driver checks if "vq->max_num_buffers + *nbuffers < 3", but
vq->max_num_buffers is (by default) 32, so the check is never true. Nor
does the check make sense.
The original code in the BSP kernel was "vq->num_buffers + *nbuffers <
3", but got mangled along the way to upstream. The intention was to make
sure that at least 3 buffers are allocated.
Fix this by removing the bad lines and setting q->min_reqbufs_allocation
to three.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4c5cc2f65386e22166ce006efe515c667aa075e4 ]
Trying to set the affinity of the interrupts associated to stm32
pinctrl results in a write error.
Fill struct irq_chip::irq_set_affinity to use the default helper
function.
Signed-off-by: Cheick Traore <cheick.traore@foss.st.com>
Signed-off-by: Antonio Borneo <antonio.borneo@foss.st.com>
Link: https://lore.kernel.org/20250610143042.295376-3-antonio.borneo@foss.st.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 04caad5a7ba86e830d04750417a15bad8ac2613c ]
With the ATA error model, an NCQ command failure always triggers an abort
(termination) of all NCQ commands queued on the device. In such case, the
SAT or the host must handle the failed command according to the command
sense data and immediately retry all other NCQ commands that were aborted
due to the failed NCQ command.
For SAS HBAs controlled by the mpi3mr driver, NCQ command aborts are not
handled by the HBA SAT and sent back to the host, with an ioc log
information equal to 0x31080000 (IOC_LOGINFO_PREFIX_PL with the PL code
PL_LOGINFO_CODE_SATA_NCQ_FAIL_ALL_CMDS_AFTR_ERR). The function
mpi3mr_process_op_reply_desc() always forces a retry of commands
terminated with the status MPI3_IOCSTATUS_SCSI_IOC_TERMINATED using the
SCSI result DID_SOFT_ERROR, regardless of the ioc_loginfo for the
command. This correctly forces the retry of collateral NCQ abort
commands, but with the retry counter for the command being incremented.
If a command to an ATA device is subject to too many retries due to other
NCQ commands failing (e.g. read commands trying to access unreadable
sectors), the collateral NCQ abort commands may be terminated with an
error as they run out of retries. This violates the SAT specification and
causes hard-to-debug command errors.
Solve this issue by modifying the handling of the
MPI3_IOCSTATUS_SCSI_IOC_TERMINATED status to check if a command is for an
ATA device and if the command ioc_loginfo indicates an NCQ collateral
abort. If that is the case, force the command retry using the SCSI result
DID_IMM_RETRY to avoid incrementing the command retry count.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20250606052747.742998-2-dlemoal@kernel.org
Tested-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 258a0a19621793b811356fc9d1849f950629d669 ]
This change frees resources after an error is detected.
Signed-off-by: Francisco Gutierrez <frankramirez@google.com>
Link: https://lore.kernel.org/r/20250617210443.989058-1-frankramirez@google.com
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 15592a11d5a5c8411ac8494ec49736b658f6fbff ]
With the ATA error model, an NCQ command failure always triggers an abort
(termination) of all NCQ commands queued on the device. In such case, the
SAT or the host must handle the failed command according to the command
sense data and immediately retry all other NCQ commands that were aborted
due to the failed NCQ command.
For SAS HBAs controlled by the mpt3sas driver, NCQ command aborts are not
handled by the HBA SAT and sent back to the host, with an ioc log
information equal to 0x31080000 (IOC_LOGINFO_PREFIX_PL with the PL code
PL_LOGINFO_CODE_SATA_NCQ_FAIL_ALL_CMDS_AFTR_ERR). The function
_scsih_io_done() always forces a retry of commands terminated with the
status MPI2_IOCSTATUS_SCSI_IOC_TERMINATED using the SCSI result
DID_SOFT_ERROR, regardless of the log_info for the command. This
correctly forces the retry of collateral NCQ abort commands, but with the
retry counter for the command being incremented. If a command to an ATA
device is subject to too many retries due to other NCQ commands failing
(e.g. read commands trying to access unreadable sectors), the collateral
NCQ abort commands may be terminated with an error as they run out of
retries. This violates the SAT specification and causes hard-to-debug
command errors.
Solve this issue by modifying the handling of the
MPI2_IOCSTATUS_SCSI_IOC_TERMINATED status to check if a command is for an
ATA device and if the command loginfo indicates an NCQ collateral
abort. If that is the case, force the command retry using the SCSI result
DID_IMM_RETRY to avoid incrementing the command retry count.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20250606052747.742998-3-dlemoal@kernel.org
Tested-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4051ead99888f101be92c7ce90d2de09aac6fd1c ]
Syzkaller can create many uhid devices that trigger
repeated warnings like:
"hid-generic xxxx: unknown main item tag 0x0"
These messages can flood the system log, especially if a crash occurs
(e.g., with a slow UART console, leading to soft lockups). To mitigate
this, convert `hid_warn()` to use `dev_warn_ratelimited()`.
This helps reduce log noise and improves system stability under fuzzing
or faulty device scenarios.
Signed-off-by: Li Chen <chenl311@chinatelecom.cn>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 202ac22b8e2e015e6c196fd8113f3d2a62dd1afc ]
On some Dell XPS 13 (9345) variants, the battery used is lithium-polymer
based. Currently, this is reported as unknown technology due to the entry
missing.
[ 4083.135325] Unknown battery technology 'LIP'
Add another check for lithium-polymer in the technology parsing callback
and return that instead of unknown.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250523-psy-qcom-battmgr-add-lipo-entry-v1-1-938c20a43a25@linaro.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6698796282e828733cde3329c887b4ae9e5545e9 ]
If a call to lpfc_sli4_read_rev() from lpfc_sli4_hba_setup() fails, the
resultant cleanup routine lpfc_sli4_vport_delete_fcp_xri_aborted() may
occur before sli4_hba.hdwqs are allocated. This may result in a null
pointer dereference when attempting to take the abts_io_buf_list_lock for
the first hardware queue. Fix by adding a null ptr check on
phba->sli4_hba.hdwq and early return because this situation means there
must have been an error during port initialization.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20250618192138.124116-4-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1cced5779e7a3ff7ec025fc47c76a7bd3bb38877 ]
For SLI3, the HBA_SETUP flag is never set so the lpfc_dev_loss_tmo_callbk
always early returns. Add a phba->sli_rev check for SLI4 mode so that
the SLI3 path can flow through the original dev_loss_tmo worker thread
design to lpfc_dev_loss_tmo_handler instead of early return.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20250618192138.124116-9-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 43163f4c30f94d2103c948a247cdf2cda5068ca7 ]
In the s390 defconfig, gcc-10 and earlier end up inlining three functions
into nldev_stat_get_doit(), and each of them uses some 600 bytes of stack.
The result is a function with an overly large stack frame and a warning:
drivers/infiniband/core/nldev.c:2466:1: error: the frame size of 1720 bytes is larger than 1280 bytes [-Werror=frame-larger-than=]
Mark the three functions noinline_for_stack to prevent this, ensuring
that only one copy of the nlattr array is on the stack of each function.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20250620113335.3776965-1-arnd@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 59f7d2138591ef8f0e4e4ab5f1ab674e8181ad3a ]
The function divides number of online CPUs by num_core_siblings, and
later checks the divider by zero. This implies a possibility to get
and divide-by-zero runtime error. Fix it by moving the check prior to
division. This also helps to save one indentation level.
Signed-off-by: Yury Norov [NVIDIA] <yury.norov@gmail.com>
Link: https://patch.msgid.link/20250604193947.11834-3-yury.norov@gmail.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e19bdbaa31082b43dab1d936e20efcebc30aa73d ]
DMA operates in Double Buffer Mode (DBM) when the transfer is cyclic and
there are at least two periods.
When DBM is enabled, the DMA toggles between two memory targets (SxM0AR and
SxM1AR), indicated by the SxSCR.CT bit (Current Target).
There is no need to update the next memory address if two periods are
configured, as SxM0AR and SxM1AR are already properly set up before the
transfer begins in the stm32_dma_start_transfer() function.
This avoids unnecessary updates to SxM0AR/SxM1AR, thereby preventing
potential Transfer Errors. Specifically, when the channel is enabled,
SxM0AR and SxM1AR can only be written if SxSCR.CT=1 and SxSCR.CT=0,
respectively. Otherwise, a Transfer Error interrupt is triggered, and the
stream is automatically disabled.
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Link: https://lore.kernel.org/r/20250624-stm32_dma_dbm_fix-v1-1-337c40d6c93e@foss.st.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2e84a5e5374232e6f356ce5c079a5658d7e4af2c ]
mc_subled used for multi_index needs well defined array indexes,
to guarantee the desired result, use reg for that.
If devicetree child nodes is processed in random or reverse order
you may end up with multi_index "blue green red" instead of the expected
"red green blue".
If user space apps uses multi_index to deduce how to control the leds
they would most likely be broken without this patch if devicetree
processing is reversed (which it appears to be).
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-fuji.dts has reg set
but I don't see how it can have worked without this change.
If reg is not set, an error is returned,
If reg is out of range, an error is returned.
reg within led child nodes starts with 0, to map to the iout in each bank.
Signed-off-by: Johan Adolfsson <johan.adolfsson@axis.com>
Reviewed-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Link: https://lore.kernel.org/r/20250617-led-fix-v7-1-cdbe8efc88fa@axis.com
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 5a0abb8909b9dcf347fce1d201ac6686ac33fd64 ]
When operating a pipeline with a missing V4L2_CID_LINK_FREQ control this
two line warning is printed each time the pipeline is started. Reduce
this excessive logging by only warning once for the missing control.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 484f8bec3ddb453321ef0b8621c25de6ce3d0302 ]
The OV5670 is found on Dell 7212 tablets paired with an IPU3 ISP
and needs to be connected by the ipu-bridge. Add it to the list
of supported devices.
Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0370395d45ca6dd53bb931978f0e91ac8dd6f1c5 ]
Probing peripherals in the AON and PERI domains, such as the PVT thermal
sensor and the PWM controller, can lead to boot hangs or unresponsive
devices on the LPi4A board. The root cause is that their parent bus
clocks ('CLK_CPU2AON_X2H' and the 'CLK_PERISYS_APB' clocks) are
automatically gated by the kernel's power-saving mechanisms when the bus
is perceived as idle.
Alternative solutions were investigated, including modeling the parent
bus in the Device Tree with 'simple-pm-bus' or refactoring the clock
driver's parentage. The 'simple-pm-bus' approach is not viable due to
the lack of defined bus address ranges in the hardware manual and its
creation of improper dependencies on the 'pm_runtime' API for consumer
drivers.
Therefore, applying the'`CLK_IGNORE_UNUSED' flag directly to the
essential bus clocks is the most direct and targeted fix. This prevents
the kernel from auto-gating these buses and ensures peripherals remain
accessible.
This change fixes the boot hang associated with the PVT sensor and
resolves the functional issues with the PWM controller.
Link: https://lore.kernel.org/all/9e8a12db-236d-474c-b110-b3be96edf057@samsung.com/ [1]
Reviewed-by: Drew Fustini <drew@pdp7.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Michal Wilczynski <m.wilczynski@samsung.com>
Signed-off-by: Drew Fustini <drew@pdp7.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b791dcfcba3a0c46fb3e2decab31d2340c5dc313 ]
Firmware attach DATACORRUPT/DROP buffer flags for the frames which
needs to be dropped, handle it by setting VB2_BUF_STATE_ERROR for these
buffers before calling buf_done.
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Acked-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Tested-by: Vikash Garodia <quic_vgarodia@quicinc.com> # on sa8775p-ride
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 09d231ab569ca97478445ccc1ad44ab026de39b1 ]
Since both "length" and "offset" are of type u32, there is
no functional issue here.
Reviewed-by: Saravanan Vajravel <saravanan.vajravel@broadcom.com>
Signed-off-by: Shravya KN <shravya.k-n@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Link: https://patch.msgid.link/20250704043857.19158-2-kalesh-anakkur.purayil@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 99f2211a9d89fe34b3fa847fd7a4475171406cd0 ]
probe() requests the reset GPIO to be set to high when getting it.
Immeditately after this hi556_resume() is called and sets the GPIO low.
If the GPIO was low before requesting it this will result in the GPIO
only very briefly spiking high and the sensor not being properly reset.
The same problem also happens on back to back runtime suspend + resume.
Fix this by adding a sleep of 2 ms in hi556_resume() before setting
the GPIO low (if there is a reset GPIO).
The final sleep is kept unconditional, because if there is e.g. no reset
GPIO but a controllable clock then the sensor also needs some time after
enabling the clock.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit add4c4850363d7c1b72e8fce9ccb21fdd2cf5dc9 ]
When the bfad_im_probe() function fails during initialization, the memory
pointed to by bfad->im is freed without setting bfad->im to NULL.
Subsequently, during driver uninstallation, when the state machine enters
the bfad_sm_stopping state and calls the bfad_im_probe_undo() function,
it attempts to free the memory pointed to by bfad->im again, thereby
triggering a double-free vulnerability.
Set bfad->im to NULL if probing fails.
Signed-off-by: jackysliu <1972843537@qq.com>
Link: https://lore.kernel.org/r/tencent_3BB950D6D2D470976F55FC879206DE0B9A09@qq.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 40efc43eb7ffb5a4e2f998c13b8cfb555e671b92 ]
The driver probes with the invalid timeout value when
'iTCO_wdt_set_timeout()' fails, as its return value is not checked. In
this case, when executing "wdctl", we may get:
Device: /dev/watchdog0
Timeout: 30 seconds
Timeleft: 613 seconds
The timeout value is the value of "heartbeat" or "WATCHDOG_TIMEOUT", and
the timeleft value is calculated from the register value we actually read
(0xffff) by masking with 0x3ff and converting ticks to seconds (* 6 / 10).
Add error handling to return the failure code if 'iTCO_wdt_set_timeout()'
fails, ensuring the driver probe fails and prevents invalid operation.
Signed-off-by: Ziyan Fu <fuzy5@lenovo.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20250704073518.7838-1-13281011316@163.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 693a723291d0634eaea24cff2f9d807f3223f204 ]
The XO clock must not be disabled to avoid the kernel trying to disable
the it. As such, keep the XO clock always on by flagging it as critical.
Signed-off-by: George Moussalem <george.moussalem@outlook.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250516-ipq5018-cmn-pll-v4-1-389a6b30e504@outlook.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
state
[ Upstream commit 0429415a084a15466e87d504e8c2a502488184a5 ]
Prevent the PWM value from being set to minimum when thermal zone
temperature exceeds any trip point during driver probe. Otherwise, the
PWM fan speed will remains at minimum speed and not respond to
temperature changes.
Signed-off-by: Florin Leotescu <florin.leotescu@nxp.com>
Link: https://lore.kernel.org/r/20250603113125.3175103-5-florin.leotescu@oss.nxp.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ac3dbb91e0167d017f44701dd51c1efe30d0c256 ]
The Synopsys Watchdog driver sets the default timeout to 30 seconds,
but on some devices this is not a valid timeout. E.g. on RK3588 the
actual timeout being used is 44 seconds instead.
Once the watchdog is started the value is updated accordingly, but
it would be better to expose a sensible timeout to userspace without
the need to first start the watchdog.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20250717-dw-wdt-fix-initial-timeout-v1-1-86dc864d48dd@kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3ea3a256ed81f95ab0f3281a0e234b01a9cae605 ]
In case of an ib_fast_reg_mr allocation failure during iSER setup, the
machine hits a panic because iscsi_conn->dd_data is initialized
unconditionally, even when no memory is allocated (dd_size == 0). This
leads invalid pointer dereference during connection teardown.
Fix by setting iscsi_conn->dd_data only if memory is actually allocated.
Panic trace:
------------
iser: iser_create_fastreg_desc: Failed to allocate ib_fast_reg_mr err=-12
iser: iser_alloc_rx_descriptors: failed allocating rx descriptors / data buffers
BUG: unable to handle page fault for address: fffffffffffffff8
RIP: 0010:swake_up_locked.part.5+0xa/0x40
Call Trace:
complete+0x31/0x40
iscsi_iser_conn_stop+0x88/0xb0 [ib_iser]
iscsi_stop_conn+0x66/0xc0 [scsi_transport_iscsi]
iscsi_if_stop_conn+0x14a/0x150 [scsi_transport_iscsi]
iscsi_if_rx+0x1135/0x1834 [scsi_transport_iscsi]
? netlink_lookup+0x12f/0x1b0
? netlink_deliver_tap+0x2c/0x200
netlink_unicast+0x1ab/0x280
netlink_sendmsg+0x257/0x4f0
? _copy_from_user+0x29/0x60
sock_sendmsg+0x5f/0x70
Signed-off-by: Showrya M N <showrya@chelsio.com>
Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com>
Link: https://lore.kernel.org/r/20250627112329.19763-1-showrya@chelsio.com
Reviewed-by: Chris Leech <cleech@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c3fe7071e196e25789ecf90dbc9e8491a98884d7 ]
Current code enables only Lane 0 because pwr_cnt will be incremented on
first call to the function. Let's reorder the enablement code to enable
all 4 lanes through GRF.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Valmantas Paliksa <walmis@gmail.com>
Signed-off-by: Geraldo Nascimento <geraldogabriel@gmail.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/16b610aab34e069fd31d9f57260c10df2a968f80.1751322015.git.geraldogabriel@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 25facbabc3fc33c794ad09d73f73268c0f8cbc7d ]
pcie_conf is used to touch TEST_WRITE strobe signal. This signal should
be enabled, a little time waited, and then disabled. Current code clearly
was copy-pasted and never disables the strobe signal. Adjust the define.
While at it, remove PHY_CFG_RD_MASK which has been unused since
64cdc0360811 ("phy: rockchip-pcie: remove unused phy_rd_cfg function").
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Geraldo Nascimento <geraldogabriel@gmail.com>
Link: https://lore.kernel.org/r/d514d5d5627680caafa8b7548cbdfee4307f5440.1751322015.git.geraldogabriel@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 88828c7e940dd45d139ad4a39d702b23840a37c5 ]
On newer boards featuring the A523 SoC, the AXP323 (related to the
AXP313) is paired with the AXP717 and serves as a secondary PMIC
providing additional regulator outputs. However the MFD cells are all
registered with PLATFORM_DEVID_NONE, which causes the regulator cells
to conflict with each other.
Commit e37ec3218870 ("mfd: axp20x: Allow multiple regulators") attempted
to fix this by switching to PLATFORM_DEVID_AUTO so that the device names
would all be different, however that broke IIO channel mapping, which is
also tied to the device names. As a result the change was later reverted.
Instead, here we attempt to make sure the AXP313/AXP323 regulator cell
does not conflict by explicitly giving it an ID number. This was
previously done for the AXP809+AXP806 pair used with the A80 SoC.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20250619173207.3367126-1-wens@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2dc2ca9000eea2eb749f658196204cb84d4306f7 ]
./drivers/clk/tegra/clk-periph.c:59:5-9: WARNING:
Unsigned expression compared with zero: rate < 0
The unsigned long 'rate' variable caused:
- Incorrect handling of negative errors
- Compile warning: "Unsigned expression compared with zero"
Fix by changing to long type and adding req->rate cast.
Signed-off-by: Pei Xiao <xiaopei01@kylinos.cn>
Link: https://lore.kernel.org/r/79c7f01e29876c612e90d6d0157fb1572ca8b3fb.1752046270.git.xiaopei01@kylinos.cn
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 982fd1a74de63c388c060e4fa6f7fbd088d6d02e ]
Perform DMA unmapping operations before processing data.
Otherwise, there may be unsynchronized data accessed by
the CPU when the SWIOTLB is enabled.
Signed-off-by: Zhiqi Song <songzhiqi1@huawei.com>
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 523b84dc7ccea9c4d79126d6ed1cf9033cf83b05 ]
The current implementation may lead to buffer overflow when:
1. Unregistration creates NULL gaps in registered_fb[]
2. All array slots become occupied despite num_registered_fb < FB_MAX
3. The registration loop exceeds array bounds
Add boundary check to prevent registered_fb[FB_MAX] access.
Signed-off-by: Yongzhen Zhang <zhangyongzhen@kylinos.cn>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
