| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
[ Upstream commit 1333eee56cdf3f0cf67c6ab4114c2c9e0a952026 ]
tcm_loop_target_reset() violates the SCSI EH contract: it returns SUCCESS
without draining any in-flight commands. The SCSI EH documentation
(scsi_eh.rst) requires that when a reset handler returns SUCCESS the driver
has made lower layers "forget about timed out scmds" and is ready for new
commands. Every other SCSI LLD (virtio_scsi, mpt3sas, ipr, scsi_debug,
mpi3mr) enforces this by draining or completing outstanding commands before
returning SUCCESS.
Because tcm_loop_target_reset() doesn't drain, the SCSI EH reuses in-flight
scsi_cmnd structures for recovery commands (e.g. TUR) while the target core
still has async completion work queued for the old se_cmd. The memset in
queuecommand zeroes se_lun and lun_ref_active, causing
transport_lun_remove_cmd() to skip its percpu_ref_put(). The leaked LUN
reference prevents transport_clear_lun_ref() from completing, hanging
configfs LUN unlink forever in D-state:
INFO: task rm:264 blocked for more than 122 seconds.
rm D 0 264 258 0x00004000
Call Trace:
__schedule+0x3d0/0x8e0
schedule+0x36/0xf0
transport_clear_lun_ref+0x78/0x90 [target_core_mod]
core_tpg_remove_lun+0x28/0xb0 [target_core_mod]
target_fabric_port_unlink+0x50/0x60 [target_core_mod]
configfs_unlink+0x156/0x1f0 [configfs]
vfs_unlink+0x109/0x290
do_unlinkat+0x1d5/0x2d0
Fix this by making tcm_loop_target_reset() actually drain commands:
1. Issue TMR_LUN_RESET via tcm_loop_issue_tmr() to drain all commands that
the target core knows about (those not yet CMD_T_COMPLETE).
2. Use blk_mq_tagset_busy_iter() to iterate all started requests and
flush_work() on each se_cmd — this drains any deferred completion work
for commands that already had CMD_T_COMPLETE set before the TMR (which
the TMR skips via __target_check_io_state()). This is the same pattern
used by mpi3mr, scsi_debug, and libsas to drain outstanding commands
during reset.
Fixes: e0eb5d38b732 ("scsi: target: tcm_loop: Use block cmd allocator for se_cmds")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-6
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Link: https://patch.msgid.link/27011aa34c8f6b1b94d2e3cf5655b6d037f53428.1773706803.git.josef@toxicpanda.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 01f784fc9d0ab2a6dac45ee443620e517cb2a19b ]
The target_core_file doesn't initialize the aio_cmd->iocb for the
ki_write_stream. When a write command fd_execute_rw_aio() is executed,
we may get a bogus ki_write_stream value, causing unintended write
failure status when checking iocb->ki_write_stream > max_write_streams
in the block device.
Let's just use kzalloc_flex when allocating the aio_cmd and let
ki_write_stream=0 to fix this issue.
Fixes: 732f25a2895a ("fs: add a write stream field to the kiocb")
Fixes: c27683da6406 ("block: expose write streams for block device nodes")
Cc: stable@vger.kernel.org
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://patch.msgid.link/f1a2f81c62f043e31f80bb92d5f29893400c8ee2.1773450782.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
[ changed kmalloc() to kzalloc() ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit c4ea7d8907cf72b259bf70bd8c2e791e1c4ff70f ]
If auxiliary_device_add() fails, add_adev() jumps to add_fail and calls
auxiliary_device_uninit(adev).
The auxiliary device has its release callback set to adev_release(),
which frees the containing struct mana_adev. Since adev is embedded in
struct mana_adev, the subsequent fall-through to init_fail and access
to adev->id may result in a use-after-free.
Fix this by saving the allocated auxiliary device id in a local
variable before calling auxiliary_device_add(), and use that saved id
in the cleanup path after auxiliary_device_uninit().
Fixes: a69839d4327d ("net: mana: Add support for auxiliary device")
Cc: stable@vger.kernel.org
Reviewed-by: Long Li <longli@microsoft.com>
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
Link: https://patch.msgid.link/20260323165730.945365-1-lgs201920130244@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 90d239cc53723c1a3f89ce08eac17bf3a9e9f2d4 ]
LVDS does not use an HPD pin so it may be invalid. Handle
this case correctly in link encoder creation.
Fixes: 7c8fb3b8e9ba ("drm/amd/display: Add hpd_source index check for DCE60/80/100/110/112/120 link encoders")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/5012
Cc: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Cc: Roman Li <roman.li@amd.com>
Reviewed-by: Roman Li <roman.li@amd.com>
Reviewed-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 3b5620f7ee688177fcf65cf61588c5435bce1872)
Cc: stable@vger.kernel.org
[ removed unrelated VGA connector block absent from stable and split combined null/bounds check into separate guard and ternary ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 3e6dd28a11083e83e11a284d99fcc9eb748c321c ]
Forcibly disable the OD_FAN_CURVE feature when temperature or PWM range is invalid,
otherwise PMFW will reject this configuration on smu v13.0.x
example:
$ sudo cat /sys/bus/pci/devices/<BDF>/gpu_od/fan_ctrl/fan_curve
OD_FAN_CURVE:
0: 0C 0%
1: 0C 0%
2: 0C 0%
3: 0C 0%
4: 0C 0%
OD_RANGE:
FAN_CURVE(hotspot temp): 0C 0C
FAN_CURVE(fan speed): 0% 0%
$ echo "0 50 40" | sudo tee fan_curve
kernel log:
[ 756.442527] amdgpu 0000:03:00.0: amdgpu: Fan curve temp setting(50) must be within [0, 0]!
[ 777.345800] amdgpu 0000:03:00.0: amdgpu: Fan curve temp setting(50) must be within [0, 0]!
Closes: https://github.com/ROCm/amdgpu/issues/208
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 470891606c5a97b1d0d937e0aa67a3bed9fcb056)
Cc: stable@vger.kernel.org
[ adapted forward declaration placement to existing FEATURE_MASK macro ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 789b06f9f39cdc7e895bdab2c034e39c41c8f8d6 upstream.
Currently we execute `SET_NETDEV_DEV(dev, &priv->lowerdev->dev)` for
the virt_wifi net devices. However, unregistering a virt_wifi device in
netdev_run_todo() can happen together with the device referenced by
SET_NETDEV_DEV().
It can result in use-after-free during the ethtool operations performed
on a virt_wifi device that is currently being unregistered. Such a net
device can have the `dev.parent` field pointing to the freed memory,
but ethnl_ops_begin() calls `pm_runtime_get_sync(dev->dev.parent)`.
Let's remove SET_NETDEV_DEV for virt_wifi to avoid bugs like this:
==================================================================
BUG: KASAN: slab-use-after-free in __pm_runtime_resume+0xe2/0xf0
Read of size 2 at addr ffff88810cfc46f8 by task pm/606
Call Trace:
<TASK>
dump_stack_lvl+0x4d/0x70
print_report+0x170/0x4f3
? __pfx__raw_spin_lock_irqsave+0x10/0x10
kasan_report+0xda/0x110
? __pm_runtime_resume+0xe2/0xf0
? __pm_runtime_resume+0xe2/0xf0
__pm_runtime_resume+0xe2/0xf0
ethnl_ops_begin+0x49/0x270
ethnl_set_features+0x23c/0xab0
? __pfx_ethnl_set_features+0x10/0x10
? kvm_sched_clock_read+0x11/0x20
? local_clock_noinstr+0xf/0xf0
? local_clock+0x10/0x30
? kasan_save_track+0x25/0x60
? __kasan_kmalloc+0x7f/0x90
? genl_family_rcv_msg_attrs_parse.isra.0+0x150/0x2c0
genl_family_rcv_msg_doit+0x1e7/0x2c0
? __pfx_genl_family_rcv_msg_doit+0x10/0x10
? __pfx_cred_has_capability.isra.0+0x10/0x10
? stack_trace_save+0x8e/0xc0
genl_rcv_msg+0x411/0x660
? __pfx_genl_rcv_msg+0x10/0x10
? __pfx_ethnl_set_features+0x10/0x10
netlink_rcv_skb+0x121/0x380
? __pfx_genl_rcv_msg+0x10/0x10
? __pfx_netlink_rcv_skb+0x10/0x10
? __pfx_down_read+0x10/0x10
genl_rcv+0x23/0x30
netlink_unicast+0x60f/0x830
? __pfx_netlink_unicast+0x10/0x10
? __pfx___alloc_skb+0x10/0x10
netlink_sendmsg+0x6ea/0xbc0
? __pfx_netlink_sendmsg+0x10/0x10
? __futex_queue+0x10b/0x1f0
____sys_sendmsg+0x7a2/0x950
? copy_msghdr_from_user+0x26b/0x430
? __pfx_____sys_sendmsg+0x10/0x10
? __pfx_copy_msghdr_from_user+0x10/0x10
___sys_sendmsg+0xf8/0x180
? __pfx____sys_sendmsg+0x10/0x10
? __pfx_futex_wait+0x10/0x10
? fdget+0x2e4/0x4a0
__sys_sendmsg+0x11f/0x1c0
? __pfx___sys_sendmsg+0x10/0x10
do_syscall_64+0xe2/0x570
? exc_page_fault+0x66/0xb0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
This fix may be combined with another one in the ethtool subsystem:
https://lore.kernel.org/all/20260322075917.254874-1-alex.popov@linux.com/T/#u
Fixes: d43c65b05b848e0b ("ethtool: runtime-resume netdev parent in ethnl_ops_begin")
Cc: stable@vger.kernel.org
Signed-off-by: Alexander Popov <alex.popov@linux.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20260324224607.374327-1-alex.popov@linux.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6e0e34d85cd46ceb37d16054e97a373a32770f6c upstream.
f_audio_complete() copies req->length bytes into a 4-byte stack
variable:
u32 data = 0;
memcpy(&data, req->buf, req->length);
req->length is derived from the host-controlled USB request path,
which can lead to a stack out-of-bounds write.
Validate req->actual against the expected payload size for the
supported control selectors and decode only the expected amount
of data.
This avoids copying a host-influenced length into a fixed-size
stack object.
Signed-off-by: Taegu Ha <hataegu0826@gmail.com>
Cc: stable <stable@kernel.org>
Link: https://patch.msgid.link/20260401191311.3604898-1-hataegu0826@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 4e0a88254ad59f6c53a34bf5fa241884ec09e8b2 upstream.
There was an issue when you did the following:
- setup and bind an hid gadget
- open /dev/hidg0
- use the resulting fd in EPOLL_CTL_ADD
- unbind the UDC
- bind the UDC
- use the fd in EPOLL_CTL_DEL
When CONFIG_DEBUG_LIST was enabled, a list_del corruption was reported
within remove_wait_queue (via ep_remove_wait_queue). After some
debugging I found out that the queues, which f_hid registers via
poll_wait were the problem. These were initialized using
init_waitqueue_head inside hidg_bind. So effectively, the bind function
re-initialized the queues while there were still items in them.
The solution is to move the initialization from hidg_bind to hidg_alloc
to extend their lifetimes to the lifetime of the function instance.
Additionally, I found many other possibly problematic init calls in the
bind function, which I moved as well.
Signed-off-by: Michael Zimmermann <sigmaepsilon92@gmail.com>
Cc: stable <stable@kernel.org>
Link: https://patch.msgid.link/20260331184844.2388761-1-sigmaepsilon92@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e367599529dc42578545a7f85fde517b35b3cda7 upstream.
The net_device is allocated during function instance creation and
registered during the bind phase with the gadget device as its sysfs
parent. When the function unbinds, the parent device is destroyed, but
the net_device survives, resulting in dangling sysfs symlinks:
console:/ # ls -l /sys/class/net/usb0
lrwxrwxrwx ... /sys/class/net/usb0 ->
/sys/devices/platform/.../gadget.0/net/usb0
console:/ # ls -l /sys/devices/platform/.../gadget.0/net/usb0
ls: .../gadget.0/net/usb0: No such file or directory
Use device_move() to reparent the net_device between the gadget device
tree and /sys/devices/virtual across bind and unbind cycles. During the
final unbind, calling device_move(NULL) moves the net_device to the
virtual device tree before the gadget device is destroyed. On rebinding,
device_move() reparents the device back under the new gadget, ensuring
proper sysfs topology and power management ordering.
To maintain compatibility with legacy composite drivers (e.g., multi.c),
the borrowed_net flag is used to indicate whether the network device is
shared and pre-registered during the legacy driver's bind phase.
Fixes: f466c6353819 ("usb: gadget: f_rndis: convert to new function interface with backward compatibility")
Cc: stable@vger.kernel.org
Signed-off-by: Kuen-Han Tsai <khtsai@google.com>
Link: https://patch.msgid.link/20260320-usb-net-lifecycle-v1-7-4886b578161b@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 06524cd1c9011bee141a87e43ab878641ed3652b upstream.
The net_device is allocated during function instance creation and
registered during the bind phase with the gadget device as its sysfs
parent. When the function unbinds, the parent device is destroyed, but
the net_device survives, resulting in dangling sysfs symlinks:
console:/ # ls -l /sys/class/net/usb0
lrwxrwxrwx ... /sys/class/net/usb0 ->
/sys/devices/platform/.../gadget.0/net/usb0
console:/ # ls -l /sys/devices/platform/.../gadget.0/net/usb0
ls: .../gadget.0/net/usb0: No such file or directory
Use device_move() to reparent the net_device between the gadget device
tree and /sys/devices/virtual across bind and unbind cycles. During the
final unbind, calling device_move(NULL) moves the net_device to the
virtual device tree before the gadget device is destroyed. On rebinding,
device_move() reparents the device back under the new gadget, ensuring
proper sysfs topology and power management ordering.
To maintain compatibility with legacy composite drivers (e.g., multi.c),
the bound flag is used to indicate whether the network device is shared
and pre-registered during the legacy driver's bind phase.
Fixes: 8cedba7c73af ("usb: gadget: f_subset: convert to new function interface with backward compatibility")
Cc: stable@vger.kernel.org
Signed-off-by: Kuen-Han Tsai <khtsai@google.com>
Link: https://patch.msgid.link/20260320-usb-net-lifecycle-v1-6-4886b578161b@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d9270c9a8118c1535409db926ac1e2545dc97b81 upstream.
The net_device is allocated during function instance creation and
registered during the bind phase with the gadget device as its sysfs
parent. When the function unbinds, the parent device is destroyed, but
the net_device survives, resulting in dangling sysfs symlinks:
console:/ # ls -l /sys/class/net/usb0
lrwxrwxrwx ... /sys/class/net/usb0 ->
/sys/devices/platform/.../gadget.0/net/usb0
console:/ # ls -l /sys/devices/platform/.../gadget.0/net/usb0
ls: .../gadget.0/net/usb0: No such file or directory
Use device_move() to reparent the net_device between the gadget device
tree and /sys/devices/virtual across bind and unbind cycles. During the
final unbind, calling device_move(NULL) moves the net_device to the
virtual device tree before the gadget device is destroyed. On rebinding,
device_move() reparents the device back under the new gadget, ensuring
proper sysfs topology and power management ordering.
To maintain compatibility with legacy composite drivers (e.g., multi.c),
the bound flag is used to indicate whether the network device is shared
and pre-registered during the legacy driver's bind phase.
Fixes: b29002a15794 ("usb: gadget: f_eem: convert to new function interface with backward compatibility")
Cc: stable@vger.kernel.org
Signed-off-by: Kuen-Han Tsai <khtsai@google.com>
Link: https://patch.msgid.link/20260320-usb-net-lifecycle-v1-5-4886b578161b@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b2cc4fae67a51f60d81d6af2678696accb07c656 upstream.
The net_device is allocated during function instance creation and
registered during the bind phase with the gadget device as its sysfs
parent. When the function unbinds, the parent device is destroyed, but
the net_device survives, resulting in dangling sysfs symlinks:
console:/ # ls -l /sys/class/net/usb0
lrwxrwxrwx ... /sys/class/net/usb0 ->
/sys/devices/platform/.../gadget.0/net/usb0
console:/ # ls -l /sys/devices/platform/.../gadget.0/net/usb0
ls: .../gadget.0/net/usb0: No such file or directory
Use device_move() to reparent the net_device between the gadget device
tree and /sys/devices/virtual across bind and unbind cycles. During the
final unbind, calling device_move(NULL) moves the net_device to the
virtual device tree before the gadget device is destroyed. On rebinding,
device_move() reparents the device back under the new gadget, ensuring
proper sysfs topology and power management ordering.
To maintain compatibility with legacy composite drivers (e.g., multi.c),
the bound flag is used to indicate whether the network device is shared
and pre-registered during the legacy driver's bind phase.
Fixes: fee562a6450b ("usb: gadget: f_ecm: convert to new function interface with backward compatibility")
Cc: stable@vger.kernel.org
Signed-off-by: Kuen-Han Tsai <khtsai@google.com>
Link: https://patch.msgid.link/20260320-usb-net-lifecycle-v1-4-4886b578161b@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8d8c68b1fc06ece60cf43e1306ff0f4ac121547e upstream.
The class/subclass/protocol options are suspectible to race conditions
as they can be accessed concurrently through configfs.
Use existing mutex to protect these options. This issue was identified
during code inspection.
Fixes: 73517cf49bd4 ("usb: gadget: add RNDIS configfs options for class/subclass/protocol")
Cc: stable@vger.kernel.org
Signed-off-by: Kuen-Han Tsai <khtsai@google.com>
Link: https://patch.msgid.link/20260320-usb-net-lifecycle-v1-2-4886b578161b@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit caa27923aacd8a5869207842f2ab1657c6c0c7bc upstream.
geth_alloc() increments the reference count, but geth_free() fails to
decrement it. This prevents the configuration of attributes via configfs
after unlinking the function.
Decrement the reference count in geth_free() to ensure proper cleanup.
Fixes: 02832e56f88a ("usb: gadget: f_subset: add configfs support")
Cc: stable@vger.kernel.org
Signed-off-by: Kuen-Han Tsai <khtsai@google.com>
Link: https://patch.msgid.link/20260320-usb-net-lifecycle-v1-1-4886b578161b@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit eba2936bbe6b752a31725a9eb5c674ecbf21ee7d upstream.
Commit b81ac4395bbe ("usb: gadget: uvc: allow for application to cleanly
shutdown") introduced two stages of synchronization waits totaling 1500ms
in uvc_function_unbind() to prevent several types of kernel panics.
However, this timing-based approach is insufficient during power
management (PM) transitions.
When the PM subsystem starts freezing user space processes, the
wait_event_interruptible_timeout() is aborted early, which allows the
unbind thread to proceed and nullify the gadget pointer
(cdev->gadget = NULL):
[ 814.123447][ T947] configfs-gadget.g1 gadget.0: uvc: uvc_function_unbind()
[ 814.178583][ T3173] PM: suspend entry (deep)
[ 814.192487][ T3173] Freezing user space processes
[ 814.197668][ T947] configfs-gadget.g1 gadget.0: uvc: uvc_function_unbind no clean disconnect, wait for release
When the PM subsystem resumes or aborts the suspend and tasks are
restarted, the V4L2 release path is executed and attempts to access the
already nullified gadget pointer, triggering a kernel panic:
[ 814.292597][ C0] PM: pm_system_irq_wakeup: 479 triggered dhdpcie_host_wake
[ 814.386727][ T3173] Restarting tasks ...
[ 814.403522][ T4558] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000030
[ 814.404021][ T4558] pc : usb_gadget_deactivate+0x14/0xf4
[ 814.404031][ T4558] lr : usb_function_deactivate+0x54/0x94
[ 814.404078][ T4558] Call trace:
[ 814.404080][ T4558] usb_gadget_deactivate+0x14/0xf4
[ 814.404083][ T4558] usb_function_deactivate+0x54/0x94
[ 814.404087][ T4558] uvc_function_disconnect+0x1c/0x5c
[ 814.404092][ T4558] uvc_v4l2_release+0x44/0xac
[ 814.404095][ T4558] v4l2_release+0xcc/0x130
Address the race condition and NULL pointer dereference by:
1. State Synchronization (flag + mutex)
Introduce a 'func_unbound' flag in struct uvc_device. This allows
uvc_function_disconnect() to safely skip accessing the nullified
cdev->gadget pointer. As suggested by Alan Stern, this flag is protected
by a new mutex (uvc->lock) to ensure proper memory ordering and prevent
instruction reordering or speculative loads. This mutex is also used to
protect 'func_connected' for consistent state management.
2. Explicit Synchronization (completion)
Use a completion to synchronize uvc_function_unbind() with the
uvc_vdev_release() callback. This prevents Use-After-Free (UAF) by
ensuring struct uvc_device is freed after all video device resources
are released.
Fixes: b81ac4395bbe ("usb: gadget: uvc: allow for application to cleanly shutdown")
Cc: stable <stable@kernel.org>
Suggested-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Jimmy Hu <hhhuuu@google.com>
Link: https://patch.msgid.link/20260320065427.1374555-1-hhhuuu@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e002e92e88e12457373ed096b18716d97e7bbb20 upstream.
Commit ec35c1969650 ("usb: gadget: f_ncm: Fix net_device lifecycle with
device_move") reparents the gadget device to /sys/devices/virtual during
unbind, clearing the gadget pointer. If the userspace tool queries on
the surviving interface during this detached window, this leads to a
NULL pointer dereference.
Unable to handle kernel NULL pointer dereference
Call trace:
eth_get_drvinfo+0x50/0x90
ethtool_get_drvinfo+0x5c/0x1f0
__dev_ethtool+0xaec/0x1fe0
dev_ethtool+0x134/0x2e0
dev_ioctl+0x338/0x560
Add a NULL check for dev->gadget in eth_get_drvinfo(). When detached,
skip copying the fw_version and bus_info strings, which is natively
handled by ethtool_get_drvinfo for empty strings.
Suggested-by: Val Packett <val@packett.cool>
Reported-by: Val Packett <val@packett.cool>
Closes: https://lore.kernel.org/linux-usb/10890524-cf83-4a71-b879-93e2b2cc1fcc@packett.cool/
Fixes: ec35c1969650 ("usb: gadget: f_ncm: Fix net_device lifecycle with device_move")
Cc: stable <stable@kernel.org>
Signed-off-by: Kuen-Han Tsai <khtsai@google.com>
Link: https://patch.msgid.link/20260316-eth-null-deref-v1-1-07005f33be85@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e1eabb072c75681f78312c484ccfffb7430f206e upstream.
A race condition between gether_disconnect() and eth_stop() leads to a
NULL pointer dereference. Specifically, if eth_stop() is triggered
concurrently while gether_disconnect() is tearing down the endpoints,
eth_stop() attempts to access the cleared endpoint descriptor, causing
the following NPE:
Unable to handle kernel NULL pointer dereference
Call trace:
__dwc3_gadget_ep_enable+0x60/0x788
dwc3_gadget_ep_enable+0x70/0xe4
usb_ep_enable+0x60/0x15c
eth_stop+0xb8/0x108
Because eth_stop() crashes while holding the dev->lock, the thread
running gether_disconnect() fails to acquire the same lock and spins
forever, resulting in a hardlockup:
Core - Debugging Information for Hardlockup core(7)
Call trace:
queued_spin_lock_slowpath+0x94/0x488
_raw_spin_lock+0x64/0x6c
gether_disconnect+0x19c/0x1e8
ncm_set_alt+0x68/0x1a0
composite_setup+0x6a0/0xc50
The root cause is that the clearing of dev->port_usb in
gether_disconnect() is delayed until the end of the function.
Move the clearing of dev->port_usb to the very beginning of
gether_disconnect() while holding dev->lock. This cuts off the link
immediately, ensuring eth_stop() will see dev->port_usb as NULL and
safely bail out.
Fixes: 2b3d942c4878 ("usb ethernet gadget: split out network core")
Cc: stable <stable@kernel.org>
Signed-off-by: Kuen-Han Tsai <khtsai@google.com>
Link: https://patch.msgid.link/20260311-gether-disconnect-npe-v1-1-454966adf7c7@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit fe868b499d16f55bbeea89992edb98043c9de416 ]
In ice_set_ringparam, tx_rings and xdp_rings are allocated before
rx_rings. If the allocation of rx_rings fails, the code jumps to
the done label leaking both tx_rings and xdp_rings. Furthermore, if
the setup of an individual Rx ring fails during the loop, the code jumps
to the free_tx label which releases tx_rings but leaks xdp_rings.
Fix this by introducing a free_xdp label and updating the error paths to
ensure both xdp_rings and tx_rings are properly freed if rx_rings
allocation or setup fails.
Compile tested only. Issue found using a prototype static analysis tool
and code review.
Fixes: fcea6f3da546 ("ice: Add stats and ethtool support")
Fixes: efc2214b6047 ("ice: Add support for XDP")
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 1965445e13c09b79932ca8154977b4408cb9610c upstream.
Upon resuming from suspend, the Touch Bar driver was missing a resume
method in order to restore the original mode the Touch Bar was on before
suspending. It is the same as the reset_resume method.
Cc: stable@vger.kernel.org
Signed-off-by: Aditya Garg <gargaditya08@live.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit d2d8c17ac01a1b1f638ea5d340a884ccc5015186 upstream.
The connector number extracted from CCI via UCSI_CCI_CONNECTOR() is a
7-bit field (0-127) that is used to index into the connector array in
ucsi_connector_change(). However, the array is only allocated for the
number of connectors reported by the device (typically 2-4 entries).
A malicious or malfunctioning device could report an out-of-range
connector number in the CCI, causing an out-of-bounds array access in
ucsi_connector_change().
Add a bounds check in ucsi_notify_common(), the central point where CCI
is parsed after arriving from hardware, so that bogus connector numbers
are rejected before they propagate further.
Fixes: bdc62f2bae8f ("usb: typec: ucsi: Simplified registration and I/O API")
Cc: stable <stable@kernel.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Nathan Rebello <nathan.c.rebello@gmail.com>
Link: https://patch.msgid.link/20260313222453.123-1-nathan.c.rebello@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
partial transfer
commit f50200dd44125e445a6164e88c217472fa79cdbc upstream.
When a gadget request is only partially transferred in transfer()
because the per-frame bandwidth budget is exhausted, the loop advances
to the next queued request. If that next request is a zero-length
packet (ZLP), len evaluates to zero and the code takes the
unlikely(len == 0) path, which sets is_short = 1. This bypasses the
bandwidth guard ("limit < ep->ep.maxpacket && limit < len") that
lives in the else branch and would otherwise break out of the loop for
non-zero requests. The is_short path then completes the URB before all
data from the first request has been transferred.
Reproducer (bulk IN, high speed):
Device side (FunctionFS with Linux AIO):
1. Queue a 65024-byte write via io_submit (127 * 512, i.e. a
multiple of the HS bulk max packet size).
2. Immediately queue a zero-length write (ZLP) via io_submit.
Host side:
3. Submit a 65536-byte bulk IN URB.
Expected: URB completes with actual_length = 65024.
Actual: URB completes with actual_length = 53248, losing 11776
bytes that leak into subsequent URBs.
At high speed the per-frame budget is 53248 bytes (512 * 13 * 8).
The 65024-byte request exhausts this budget after 53248 bytes, leaving
the request incomplete (req->req.actual < req->req.length). Neither
the request nor the URB is finished, and rescan is 0, so the loop
advances to the ZLP. For the ZLP, dev_len = 0, so len = min(12288, 0)
= 0, taking the unlikely(len == 0) path and setting is_short = 1.
The is_short handler then sets *status = 0, completing the URB with
only 53248 of the expected 65024 bytes.
Fix this by breaking out of the loop when the current request has
remaining data (req->req.actual < req->req.length). The request
resumes on the next timer tick, preserving correct data ordering.
Signed-off-by: Sebastian Urban <surban@surban.net>
Cc: stable <stable@kernel.org>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://patch.msgid.link/20260315151045.1155850-1-surban@surban.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2ca9e46f8f1f5a297eb0ac83f79d35d5b3a02541 upstream.
This fixes an error in synchronization in the dummy-hcd driver. The
error has a somewhat involved history. The synchronization mechanism
was introduced by commit 7dbd8f4cabd9 ("USB: dummy-hcd: Fix erroneous
synchronization change"), which added an emulated "interrupts enabled"
flag together with code emulating synchronize_irq() (it waits until
all current handler callbacks have returned).
But the emulated interrupt-disable occurred too late, after the driver
containing the handler callback routines had been told that it was
unbound and no more callbacks would occur. Commit 4a5d797a9f9c ("usb:
gadget: dummy_hcd: fix gpf in gadget_setup") tried to fix this by
moving the synchronize_irq() emulation code from dummy_stop() to
dummy_pullup(), which runs before the unbind callback.
There still were races, though, because the emulated interrupt-disable
still occurred too late. It couldn't be moved to dummy_pullup(),
because that routine can be called for reasons other than an impending
unbind. Therefore commits 7dc0c55e9f30 ("USB: UDC core: Add
udc_async_callbacks gadget op") and 04145a03db9d ("USB: UDC: Implement
udc_async_callbacks in dummy-hcd") added an API allowing the UDC core
to tell dummy-hcd exactly when emulated interrupts and their callbacks
should be disabled.
That brings us to the current state of things, which is still wrong
because the emulated synchronize_irq() occurs before the emulated
interrupt-disable! That's no good, beause it means that more emulated
interrupts can occur after the synchronize_irq() emulation has run,
leading to the possibility that a callback handler may be running when
the gadget driver is unbound.
To fix this, we have to move the synchronize_irq() emulation code yet
again, to the dummy_udc_async_callbacks() routine, which takes care of
enabling and disabling emulated interrupt requests. The
synchronization will now run immediately after emulated interrupts are
disabled, which is where it belongs.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Fixes: 04145a03db9d ("USB: UDC: Implement udc_async_callbacks in dummy-hcd")
Cc: stable <stable@kernel.org>
Link: https://patch.msgid.link/c7bc93fe-4241-4d04-bd56-27c12ba35c97@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 616a63ff495df12863692ab3f9f7b84e3fa7a66d upstream.
Syzbot testing was able to provoke an addressing exception and crash
in the usb_gadget_udc_reset() routine in
drivers/usb/gadgets/udc/core.c, resulting from the fact that the
routine was called with a second ("driver") argument of NULL. The bad
caller was set_link_state() in dummy_hcd.c, and the problem arose
because of a race between a USB reset and driver unbind.
These sorts of races were not supposed to be possible; commit
7dbd8f4cabd9 ("USB: dummy-hcd: Fix erroneous synchronization change"),
along with a few followup commits, was written specifically to prevent
them. As it turns out, there are (at least) two errors remaining in
the code. Another patch will address the second error; this one is
concerned with the first.
The error responsible for the syzbot crash occurred because the
stop_activity() routine will sometimes drop and then re-acquire the
dum->lock spinlock. A call to stop_activity() occurs in
set_link_state() when handling an emulated USB reset, after the test
of dum->ints_enabled and before the increment of dum->callback_usage.
This allowed another thread (doing a driver unbind) to sneak in and
grab the spinlock, and then clear dum->ints_enabled and dum->driver.
Normally this other thread would have to wait for dum->callback_usage
to go down to 0 before it would clear dum->driver, but in this case it
didn't have to wait since dum->callback_usage had not yet been
incremented.
The fix is to increment dum->callback_usage _before_ calling
stop_activity() instead of after. Then the thread doing the unbind
will not clear dum->driver until after the call to
usb_gadget_udc_reset() safely returns and dum->callback_usage has been
decremented again.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: syzbot+19bed92c97bee999e5db@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-usb/68fc7c9c.050a0220.346f24.023c.GAE@google.com/
Tested-by: syzbot+19bed92c97bee999e5db@syzkaller.appspotmail.com
Fixes: 7dbd8f4cabd9 ("USB: dummy-hcd: Fix erroneous synchronization change")
Cc: stable <stable@kernel.org>
Link: https://patch.msgid.link/46135f42-fdbe-46b5-aac0-6ca70492af15@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 73a505dc48144ec72e25874e2b2a72487b02d3bc upstream.
device_property_read_foo() returns 0 on success and only then modifies
'val'. Currently, val is left uninitialized if the aforementioned
function returns non-zero, making nhi_wake_supported() return true
almost always (random != 0) if the property is not present in device
firmware.
Invert the check to make it make sense.
Fixes: 3cdb9446a117 ("thunderbolt: Add support for Intel Ice Lake")
Cc: stable@vger.kernel.org
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3b8ae9817686efb3ea789ca9d4efdff2ce9c1c04 upstream.
In the current implementation, if a cable's alternate mode enter operation
is not supported, the tbt->plug[TYPEC_PLUG_SOP_P] pointer is cleared by the
time tbt_enter_mode() is called. This prevents the driver from identifying
the cable's VDO.
As a result, the Thunderbolt connection falls back to the default
TBT_CABLE_USB3_PASSIVE speed, even if the cable supports higher speeds.
To ensure the correct VDO value is used during mode entry, calculate and
store the enter_vdo earlier during the initialization phase in tbt_ready().
Cc: stable <stable@kernel.org>
Fixes: 100e25738659 ("usb: typec: Add driver for Thunderbolt 3 Alternate Mode")
Tested-by: Madhu M <madhu.m@intel.corp-partner.google.com>
Signed-off-by: Andrei Kuchynski <akuchynski@chromium.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Benson Leung <bleung@chromium.org>
Link: https://patch.msgid.link/20260324103012.1417616-1-akuchynski@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6a502776f4a4f80fb839b22f12aeaf0267fca344 upstream.
In the SDSP probe path, qcom_scm_assign_mem() is used to assign the
reserved memory to the configured VMIDs, but its return value was not checked.
Fail the probe if the SCM call fails to avoid continuing with an
unexpected/incorrect memory permission configuration.
This issue was found by an in-house analysis workflow that extracts AST-based
information and runs static checks, with LLM assistance for triage, and was
confirmed by manual code review.
No hardware testing was performed.
Fixes: c3c0363bc72d4 ("misc: fastrpc: support complete DMA pool access to the DSP")
Cc: stable@vger.kernel.org # 6.11-rc1
Signed-off-by: Xingjing Deng <xjdeng@buaa.edu.cn>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20260131065539.2124047-1-xjdeng@buaa.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ba2c83167b215da30fa2aae56b140198cf8d8408 upstream.
fastrpc_init_create_static_process() may free cctx->remote_heap on the
err_map path but does not clear the pointer. Later, fastrpc_rpmsg_remove()
frees cctx->remote_heap again if it is non-NULL, which can lead to a
double-free if the INIT_CREATE_STATIC ioctl hits the error path and the rpmsg
device is subsequently removed/unbound.
Clear cctx->remote_heap after freeing it in the error path to prevent the
later cleanup from freeing it again.
This issue was found by an in-house analysis workflow that extracts AST-based
information and runs static checks, with LLM assistance for triage, and was
confirmed by manual code review.
No hardware testing was performed.
Fixes: 0871561055e66 ("misc: fastrpc: Add support for audiopd")
Cc: stable@vger.kernel.org # 6.2+
Signed-off-by: Xingjing Deng <xjdeng@buaa.edu.cn>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20260129234140.410983-1-xjdeng@buaa.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 9e07e3b81807edd356e1f794cffa00a428eff443 upstream.
If thermal_zone_device_register_with_trips() fails after registering
a thermal zone device, it needs to wait for the tz->removal completion
like thermal_zone_device_unregister(), in case user space has managed
to take a reference to the thermal zone device's kobject, in which case
thermal_release() may not be called by the error path itself and tz may
be freed prematurely.
Add the missing wait_for_completion() call to the thermal zone device
registration error path.
Fixes: 04e6ccfc93c5 ("thermal: core: Fix NULL pointer dereference in zone registration error path")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: All applicable <stable@vger.kernel.org>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Tested-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://patch.msgid.link/2849815.mvXUDI8C0e@rafael.j.wysocki
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 45b859b0728267a6199ee5002d62e6c6f3e8c89d upstream.
Since thermal_zone_pm_complete() and thermal_zone_device_resume()
re-initialize the poll_queue delayed work for the given thermal zone,
the cancel_delayed_work_sync() in thermal_zone_device_unregister()
may miss some already running work items and the thermal zone may
be freed prematurely [1].
There are two failing scenarios that both start with
running thermal_pm_notify_complete() right before invoking
thermal_zone_device_unregister() for one of the thermal zones.
In the first scenario, there is a work item already running for
the given thermal zone when thermal_pm_notify_complete() calls
thermal_zone_pm_complete() for that thermal zone and it continues to
run when thermal_zone_device_unregister() starts. Since the poll_queue
delayed work has been re-initialized by thermal_pm_notify_complete(), the
running work item will be missed by the cancel_delayed_work_sync() in
thermal_zone_device_unregister() and if it continues to run past the
freeing of the thermal zone object, a use-after-free will occur.
In the second scenario, thermal_zone_device_resume() queued up by
thermal_pm_notify_complete() runs right after the thermal_zone_exit()
called by thermal_zone_device_unregister() has returned. The poll_queue
delayed work is re-initialized by it before cancel_delayed_work_sync() is
called by thermal_zone_device_unregister(), so it may continue to run
after the freeing of the thermal zone object, which also leads to a
use-after-free.
Address the first failing scenario by ensuring that no thermal work
items will be running when thermal_pm_notify_complete() is called.
For this purpose, first move the cancel_delayed_work() call from
thermal_zone_pm_complete() to thermal_zone_pm_prepare() to prevent
new work from entering the workqueue going forward. Next, switch
over to using a dedicated workqueue for thermal events and update
the code in thermal_pm_notify() to flush that workqueue after
thermal_pm_notify_prepare() has returned which will take care of
all leftover thermal work already on the workqueue (that leftover
work would do nothing useful anyway because all of the thermal zones
have been flagged as suspended).
The second failing scenario is addressed by adding a tz->state check
to thermal_zone_device_resume() to prevent it from re-initializing
the poll_queue delayed work if the thermal zone is going away.
Note that the above changes will also facilitate relocating the suspend
and resume of thermal zones closer to the suspend and resume of devices,
respectively.
Fixes: 5a5efdaffda5 ("thermal: core: Resume thermal zones asynchronously")
Reported-by: syzbot+3b3852c6031d0f30dfaf@syzkaller.appspotmail.com
Closes: https://syzbot.org/bug?extid=3b3852c6031d0f30dfaf
Reported-by: Mauricio Faria de Oliveira <mfo@igalia.com>
Closes: https://lore.kernel.org/linux-pm/20260324-thermal-core-uaf-init_delayed_work-v1-1-6611ae76a8a1@igalia.com/ [1]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mauricio Faria de Oliveira <mfo@igalia.com>
Tested-by: Mauricio Faria de Oliveira <mfo@igalia.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Cc: All applicable <stable@vger.kernel.org>
Link: https://patch.msgid.link/6267615.lOV4Wx5bFT@rafael.j.wysocki
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 16fdabe143fce2cbf89139677728e17e21b46c28 upstream.
Since commit aab5c6f20023 ("gpio: set device type for GPIO chips"),
`gdev->dev.release` is unset. As a result, the reference count to
`gdev->dev` isn't dropped on the error handling paths.
Drop the reference on errors.
Also reorder the instructions to make the error handling simpler.
Now gpiochip_add_data_with_key() roughly looks like:
>>> Some memory allocation. Go to ERR ZONE 1 on errors.
>>> device_initialize().
gpiodev_release() takes over the responsibility for freeing the
resources of `gdev->dev`. The subsequent error handling paths
shouldn't go through ERR ZONE 1 again which leads to double free.
>>> Some initialization mainly on `gdev`.
>>> The rest of initialization. Go to ERR ZONE 2 on errors.
>>> Chip registration success and exit.
>>> ERR ZONE 2. gpio_device_put() and exit.
>>> ERR ZONE 1.
Cc: stable@vger.kernel.org
Fixes: aab5c6f20023 ("gpio: set device type for GPIO chips")
Reviewed-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://patch.msgid.link/20260205092840.2574840-1-tzungbi@kernel.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c720fb57d56274213d027b3c5ab99080cf62a306 upstream.
Suspend may fail on i.MX8QM when Falling Edge is used as a pad wakeup
trigger due to a hardware bug in the detection logic. Since the hardware
does not support Both Edge wakeup, remap requests for Both Edge to Rising
Edge by default to avoid hitting this issue.
A warning is emitted when Falling Edge is selected on i.MX8QM.
Fixes: f60c9eac54af ("gpio: mxc: enable pad wakeup on i.MX8x platforms")
cc: stable@vger.kernel.org
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com>
Link: https://patch.msgid.link/20260324192129.2797237-1-shenwei.wang@nxp.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6dcf9d0064ce2f3e3dfe5755f98b93abe6a98e1e upstream.
When kobject_init_and_add() fails, cpufreq_dbs_governor_init() calls
kobject_put(&dbs_data->attr_set.kobj).
The kobject release callback cpufreq_dbs_data_release() calls
gov->exit(dbs_data) and kfree(dbs_data), but the current error path
then calls gov->exit(dbs_data) and kfree(dbs_data) again, causing a
double free.
Keep the direct kfree(dbs_data) for the gov->init() failure path, but
after kobject_init_and_add() has been called, let kobject_put() handle
the cleanup through cpufreq_dbs_data_release().
Fixes: 4ebe36c94aed ("cpufreq: Fix kobject memleak")
Signed-off-by: Guangshuo Li <lgs201920130 |
