| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Holding the struct phy_device (phydev) lock is unnecessary when
accessing phydev->interface in the PHY driver .config_init method,
which is the only place that vsc85xx_rgmii_set_skews() is called from.
The phy_modify_paged() function implements required MDIO bus level
locking, which can not be achieved by a phydev lock.
Signed-off-by: David Epping <david.epping@missinglinkelectronics.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The VSC8501 PHY can use the same driver implementation as the VSC8502.
Adding the PHY ID and copying the handler functions of VSC8502 is
sufficient to operate it.
Signed-off-by: David Epping <david.epping@missinglinkelectronics.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The mscc driver implements support for VSC8502, so its ID should be in
the MODULE_DEVICE_TABLE for automatic loading.
Signed-off-by: David Epping <david.epping@missinglinkelectronics.com>
Fixes: d3169863310d ("net: phy: mscc: add support for VSC8502")
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5-fixes-2023-05-22
This series provides bug fixes for the mlx5 driver.
Please pull and let me know if there is any problem.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The commit c6d96df9fa2c ("net: ethernet: mtk_eth_soc: drop generic vlan rx
offload, only use DSA untagging") makes VLAN RX offloading to be only used
on the SoCs without the MTK_NETSYS_V2 ability (which are not just MT7621
and MT7622). The commit disables the proper handling of special tagged
(DSA) frames, added with commit 87e3df4961f4 ("net-next: ethernet:
mediatek: add CDM able to recognize the tag for DSA"), for non
MTK_NETSYS_V2 SoCs when it finds a MAC that does not use DSA. So if the
other MAC uses DSA, the CDMQ component transmits DSA tagged frames to the
CPU improperly. This issue can be observed on frames with TCP, for example,
a TCP speed test using iperf3 won't work.
The commit disables the proper handling of special tagged (DSA) frames
because it assumes that these SoCs don't use more than one MAC, which is
wrong. Although I made Frank address this false assumption on the patch log
when they sent the patch on behalf of Felix, the code still made changes
with this assumption.
Therefore, the proper handling of special tagged (DSA) frames must be kept
enabled in all circumstances as it doesn't affect non DSA tagged frames.
Hardware DSA untagging, introduced with the commit 2d7605a72906 ("net:
ethernet: mtk_eth_soc: enable hardware DSA untagging"), and VLAN RX
offloading are operations on the two CDM components of the frame engine,
CDMP and CDMQ, which connect to Packet DMA (PDMA) and QoS DMA (QDMA) and
are between the MACs and the CPU. These operations apply to all MACs of the
SoC so if one MAC uses DSA and the other doesn't, the hardware DSA
untagging operation will cause the CDMP component to transmit non DSA
tagged frames to the CPU improperly.
Since the VLAN RX offloading feature configuration was dropped, VLAN RX
offloading can only be used along with hardware DSA untagging. So, for the
case above, we need to disable both features and leave it to the CPU,
therefore software, to untag the DSA and VLAN tags.
So the correct way to handle this is:
For all SoCs:
Enable the proper handling of special tagged (DSA) frames
(MTK_CDMQ_IG_CTRL).
For non MTK_NETSYS_V2 SoCs:
Enable hardware DSA untagging (MTK_CDMP_IG_CTRL).
Enable VLAN RX offloading (MTK_CDMP_EG_CTRL).
When a non MTK_NETSYS_V2 SoC MAC does not use DSA:
Disable hardware DSA untagging (MTK_CDMP_IG_CTRL).
Disable VLAN RX offloading (MTK_CDMP_EG_CTRL).
Fixes: c6d96df9fa2c ("net: ethernet: mtk_eth_soc: drop generic vlan rx offload, only use DSA untagging")
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The driver's interrupt service routine is requested with the
IRQF_NO_THREAD if MSI is available. This means that the routine is
invoked in hardirq context even on PREEMPT_RT. The routine itself is
relatively short and schedules a worker, performs register access and
schedules NAPI. On PREEMPT_RT, scheduling NAPI from hardirq results in
waking ksoftirqd for further processing so using NAPI threads with this
driver is highly recommended since it NULL routes the threaded-IRQ
efforts.
Adding rtl_hw_aspm_clkreq_enable() to the ISR is problematic on
PREEMPT_RT because the function uses spinlock_t locks which become
sleeping locks on PREEMPT_RT. The locks are only used to protect
register access and don't nest into other functions or locks. They are
also not used for unbounded period of time. Therefore it looks okay to
convert them to raw_spinlock_t.
Convert the three locks which are used from the interrupt service
routine to raw_spinlock_t.
Fixes: e1ed3e4d9111 ("r8169: disable ASPM during NAPI poll")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/20230522134121.uxjax0F5@linutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
It was noticing that after a while when unloading/loading the driver and
sending traffic through the switch, it would stop working. It would stop
forwarding any traffic and the only way to get out of this was to do a
power cycle of the board. The root cause seems to be that the switch
core is initialized twice. Apparently initializing twice the switch core
disturbs the pointers in the queue systems in the HW, so after a while
it would stop sending the traffic.
Unfortunetly, it is not possible to use a reset of the switch here,
because the reset line is connected to multiple devices like MDIO,
SGPIO, FAN, etc. So then all the devices will get reseted when the
network driver will be loaded.
So the fix is to check if the core is initialized already and if that is
the case don't initialize it again.
Fixes: db8bcaad5393 ("net: lan966x: add the basic lan966x driver")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230522120038.3749026-1-horatiu.vultur@microchip.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
After the cited patch, mlx5_irq xarray index can be different then
mlx5_irq MSIX table index.
Fix it by storing both mlx5_irq xarray index and MSIX table index.
Fixes: 3354822cde5a ("net/mlx5: Use dynamic msix vectors allocation")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Eli Cohen <elic@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
The cited patch deny the user of changing the affinity of mlx5 irqs,
which break backward compatibility.
Hence, allow the user to change the affinity of mlx5 irqs.
Fixes: bbac70c74183 ("net/mlx5: Use newer affinity descriptor")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Eli Cohen <elic@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Whenever a shutdown is invoked, free irqs only and keep mlx5_irq
synthetic wrapper intact in order to avoid use-after-free on
system shutdown.
for example:
==================================================================
BUG: KASAN: use-after-free in _find_first_bit+0x66/0x80
Read of size 8 at addr ffff88823fc0d318 by task kworker/u192:0/13608
CPU: 25 PID: 13608 Comm: kworker/u192:0 Tainted: G B W O 6.1.21-cloudflare-kasan-2023.3.21 #1
Hardware name: GIGABYTE R162-R2-GEN0/MZ12-HD2-CD, BIOS R14 05/03/2021
Workqueue: mlx5e mlx5e_tx_timeout_work [mlx5_core]
Call Trace:
<TASK>
dump_stack_lvl+0x34/0x48
print_report+0x170/0x473
? _find_first_bit+0x66/0x80
kasan_report+0xad/0x130
? _find_first_bit+0x66/0x80
_find_first_bit+0x66/0x80
mlx5e_open_channels+0x3c5/0x3a10 [mlx5_core]
? console_unlock+0x2fa/0x430
? _raw_spin_lock_irqsave+0x8d/0xf0
? _raw_spin_unlock_irqrestore+0x42/0x80
? preempt_count_add+0x7d/0x150
? __wake_up_klogd.part.0+0x7d/0xc0
? vprintk_emit+0xfe/0x2c0
? mlx5e_trigger_napi_sched+0x40/0x40 [mlx5_core]
? dev_attr_show.cold+0x35/0x35
? devlink_health_do_dump.part.0+0x174/0x340
? devlink_health_report+0x504/0x810
? mlx5e_reporter_tx_timeout+0x29d/0x3a0 [mlx5_core]
? mlx5e_tx_timeout_work+0x17c/0x230 [mlx5_core]
? process_one_work+0x680/0x1050
mlx5e_safe_switch_params+0x156/0x220 [mlx5_core]
? mlx5e_switch_priv_channels+0x310/0x310 [mlx5_core]
? mlx5_eq_poll_irq_disabled+0xb6/0x100 [mlx5_core]
mlx5e_tx_reporter_timeout_recover+0x123/0x240 [mlx5_core]
? __mutex_unlock_slowpath.constprop.0+0x2b0/0x2b0
devlink_health_reporter_recover+0xa6/0x1f0
devlink_health_report+0x2f7/0x810
? vsnprintf+0x854/0x15e0
mlx5e_reporter_tx_timeout+0x29d/0x3a0 [mlx5_core]
? mlx5e_reporter_tx_err_cqe+0x1a0/0x1a0 [mlx5_core]
? mlx5e_tx_reporter_timeout_dump+0x50/0x50 [mlx5_core]
? mlx5e_tx_reporter_dump_sq+0x260/0x260 [mlx5_core]
? newidle_balance+0x9b7/0xe30
? psi_group_change+0x6a7/0xb80
? mutex_lock+0x96/0xf0
? __mutex_lock_slowpath+0x10/0x10
mlx5e_tx_timeout_work+0x17c/0x230 [mlx5_core]
process_one_work+0x680/0x1050
worker_thread+0x5a0/0xeb0
? process_one_work+0x1050/0x1050
kthread+0x2a2/0x340
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x22/0x30
</TASK>
Freed by task 1:
kasan_save_stack+0x23/0x50
kasan_set_track+0x21/0x30
kasan_save_free_info+0x2a/0x40
____kasan_slab_free+0x169/0x1d0
slab_free_freelist_hook+0xd2/0x190
__kmem_cache_free+0x1a1/0x2f0
irq_pool_free+0x138/0x200 [mlx5_core]
mlx5_irq_table_destroy+0xf6/0x170 [mlx5_core]
mlx5_core_eq_free_irqs+0x74/0xf0 [mlx5_core]
shutdown+0x194/0x1aa [mlx5_core]
pci_device_shutdown+0x75/0x120
device_shutdown+0x35c/0x620
kernel_restart+0x60/0xa0
__do_sys_reboot+0x1cb/0x2c0
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x4b/0xb5
The buggy address belongs to the object at ffff88823fc0d300
which belongs to the cache kmalloc-192 of size 192
The buggy address is located 24 bytes inside of
192-byte region [ffff88823fc0d300, ffff88823fc0d3c0)
The buggy address belongs to the physical page:
page:0000000010139587 refcount:1 mapcount:0 mapping:0000000000000000
index:0x0 pfn:0x23fc0c
head:0000000010139587 order:1 compound_mapcount:0 compound_pincount:0
flags: 0x2ffff800010200(slab|head|node=0|zone=2|lastcpupid=0x1ffff)
raw: 002ffff800010200 0000000000000000 dead000000000122 ffff88810004ca00
raw: 0000000000000000 0000000000200020 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff88823fc0d200: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff88823fc0d280: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
>ffff88823fc0d300: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff88823fc0d380: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
ffff88823fc0d400: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
==================================================================
general protection fault, probably for non-canonical address
0xdffffc005c40d7ac: 0000 [#1] PREEMPT SMP KASAN NOPTI
KASAN: probably user-memory-access in range [0x00000002e206bd60-0x00000002e206bd67]
CPU: 25 PID: 13608 Comm: kworker/u192:0 Tainted: G B W O 6.1.21-cloudflare-kasan-2023.3.21 #1
Hardware name: GIGABYTE R162-R2-GEN0/MZ12-HD2-CD, BIOS R14 05/03/2021
Workqueue: mlx5e mlx5e_tx_timeout_work [mlx5_core]
RIP: 0010:__alloc_pages+0x141/0x5c0
Call Trace:
<TASK>
? sysvec_apic_timer_interrupt+0xa0/0xc0
? asm_sysvec_apic_timer_interrupt+0x16/0x20
? __alloc_pages_slowpath.constprop.0+0x1ec0/0x1ec0
? _raw_spin_unlock_irqrestore+0x3d/0x80
__kmalloc_large_node+0x80/0x120
? kvmalloc_node+0x4e/0x170
__kmalloc_node+0xd4/0x150
kvmalloc_node+0x4e/0x170
mlx5e_open_channels+0x631/0x3a10 [mlx5_core]
? console_unlock+0x2fa/0x430
? _raw_spin_lock_irqsave+0x8d/0xf0
? _raw_spin_unlock_irqrestore+0x42/0x80
? preempt_count_add+0x7d/0x150
? __wake_up_klogd.part.0+0x7d/0xc0
? vprintk_emit+0xfe/0x2c0
? mlx5e_trigger_napi_sched+0x40/0x40 [mlx5_core]
? dev_attr_show.cold+0x35/0x35
? devlink_health_do_dump.part.0+0x174/0x340
? devlink_health_report+0x504/0x810
? mlx5e_reporter_tx_timeout+0x29d/0x3a0 [mlx5_core]
? mlx5e_tx_timeout_work+0x17c/0x230 [mlx5_core]
? process_one_work+0x680/0x1050
mlx5e_safe_switch_params+0x156/0x220 [mlx5_core]
? mlx5e_switch_priv_channels+0x310/0x310 [mlx5_core]
? mlx5_eq_poll_irq_disabled+0xb6/0x100 [mlx5_core]
mlx5e_tx_reporter_timeout_recover+0x123/0x240 [mlx5_core]
? __mutex_unlock_slowpath.constprop.0+0x2b0/0x2b0
devlink_health_reporter_recover+0xa6/0x1f0
devlink_health_report+0x2f7/0x810
? vsnprintf+0x854/0x15e0
mlx5e_reporter_tx_timeout+0x29d/0x3a0 [mlx5_core]
? mlx5e_reporter_tx_err_cqe+0x1a0/0x1a0 [mlx5_core]
? mlx5e_tx_reporter_timeout_dump+0x50/0x50 [mlx5_core]
? mlx5e_tx_reporter_dump_sq+0x260/0x260 [mlx5_core]
? newidle_balance+0x9b7/0xe30
? psi_group_change+0x6a7/0xb80
? mutex_lock+0x96/0xf0
? __mutex_lock_slowpath+0x10/0x10
mlx5e_tx_timeout_work+0x17c/0x230 [mlx5_core]
process_one_work+0x680/0x1050
worker_thread+0x5a0/0xeb0
? process_one_work+0x1050/0x1050
kthread+0x2a2/0x340
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x22/0x30
</TASK>
---[ end trace 0000000000000000 ]---
RIP: 0010:__alloc_pages+0x141/0x5c0
Code: e0 39 a3 96 89 e9 b8 22 01 32 01 83 e1 0f 48 89 fa 01 c9 48 c1 ea
03 d3 f8 83 e0 03 89 44 24 6c 48 b8 00 00 00 00 00 fc ff df <80> 3c 02
00 0f 85 fc 03 00 00 89 e8 4a 8b 14 f5 e0 39 a3 96 4c 89
RSP: 0018:ffff888251f0f438 EFLAGS: 00010202
RAX: dffffc0000000000 RBX: 1ffff1104a3e1e8b RCX: 0000000000000000
RDX: 000000005c40d7ac RSI: 0000000000000003 RDI: 00000002e206bd60
RBP: 0000000000052dc0 R08: ffff8882b0044218 R09: ffff8882b0045e8a
R10: fffffbfff300fefc R11: ffff888167af4000 R12: 0000000000000003
R13: 0000000000000000 R14: 00000000696c7070 R15: ffff8882373f4380
FS: 0000000000000000(0000) GS:ffff88bf2be80000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00005641d031eee8 CR3: 0000002e7ca14000 CR4: 0000000000350ee0
Kernel panic - not syncing: Fatal exception
Kernel Offset: 0x11000000 from 0xffffffff81000000 (relocation range:
0xffffffff80000000-0xffffffffbfffffff)
---[ end Kernel panic - not syncing: Fatal exception ]---]
Reported-by: Frederick Lawler <fred@cloudflare.com>
Link: https://lore.kernel.org/netdev/be5b9271-7507-19c5-ded1-fa78f1980e69@cloudflare.com
Signed-off-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
From one hand, mlx5 driver is allowing to probe PFs in parallel.
From the other hand, devcom, which is a share resource between PFs, is
registered without any lock. This might resulted in memory problems.
Hence, use the global mlx5_dev_list_lock in order to serialize devcom
registration.
Fixes: fadd59fc50d0 ("net/mlx5: Introduce inter-device communication mechanism")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
In case devcom allocation is failed, mlx5 is always freeing the priv.
However, this priv might have been allocated by a different thread,
and freeing it might lead to use-after-free bugs.
Fix it by freeing the priv only in case it was allocated by the
running thread.
Fixes: fadd59fc50d0 ("net/mlx5: Introduce inter-device communication mechanism")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
devcom events are sent to all registered component. Following the
cited patch, it is possible for two components, e.g.: two eswitches,
to send devcom events, while both components are registered. This
means eswitch layer will do double un/pairing, which is double
allocation and free of resources, even though only one un/pairing is
needed. flow example:
cpu0 cpu1
---- ----
mlx5_devlink_eswitch_mode_set(dev0)
esw_offloads_devcom_init()
mlx5_devcom_register_component(esw0)
mlx5_devlink_eswitch_mode_set(dev1)
esw_offloads_devcom_init()
mlx5_devcom_register_component(esw1)
mlx5_devcom_send_event()
mlx5_devcom_send_event()
Hence, check whether the eswitches are already un/paired before
free/allocation of resources.
Fixes: 09b278462f16 ("net: devlink: enable parallel ops on netlink interface")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Cited patch is using the eswitch object mapping pool while
in nic mode where it isn't initialized. This results in the
trace below [0].
Fix that by using either nic or eswitch object mapping pool
depending if eswitch is enabled or not.
[0]:
[ 826.446057] ==================================================================
[ 826.446729] BUG: KASAN: slab-use-after-free in mlx5_add_flow_rules+0x30/0x490 [mlx5_core]
[ 826.447515] Read of size 8 at addr ffff888194485830 by task tc/6233
[ 826.448243] CPU: 16 PID: 6233 Comm: tc Tainted: G W 6.3.0-rc6+ #1
[ 826.448890] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
[ 826.449785] Call Trace:
[ 826.450052] <TASK>
[ 826.450302] dump_stack_lvl+0x33/0x50
[ 826.450650] print_report+0xc2/0x610
[ 826.450998] ? __virt_addr_valid+0xb1/0x130
[ 826.451385] ? mlx5_add_flow_rules+0x30/0x490 [mlx5_core]
[ 826.451935] kasan_report+0xae/0xe0
[ 826.452276] ? mlx5_add_flow_rules+0x30/0x490 [mlx5_core]
[ 826.452829] mlx5_add_flow_rules+0x30/0x490 [mlx5_core]
[ 826.453368] ? __kmalloc_node+0x5a/0x120
[ 826.453733] esw_add_restore_rule+0x20f/0x270 [mlx5_core]
[ 826.454288] ? mlx5_eswitch_add_send_to_vport_meta_rule+0x260/0x260 [mlx5_core]
[ 826.455011] ? mutex_unlock+0x80/0xd0
[ 826.455361] ? __mutex_unlock_slowpath.constprop.0+0x210/0x210
[ 826.455862] ? mapping_add+0x2cb/0x440 [mlx5_core]
[ 826.456425] mlx5e_tc_action_miss_mapping_get+0x139/0x180 [mlx5_core]
[ 826.457058] ? mlx5e_tc_update_skb_nic+0xb0/0xb0 [mlx5_core]
[ 826.457636] ? __kasan_kmalloc+0x77/0x90
[ 826.458000] ? __kmalloc+0x57/0x120
[ 826.458336] mlx5_tc_ct_flow_offload+0x325/0xe40 [mlx5_core]
[ 826.458916] ? ct_kernel_enter.constprop.0+0x48/0xa0
[ 826.459360] ? mlx5_tc_ct_parse_action+0xf0/0xf0 [mlx5_core]
[ 826.459933] ? mlx5e_mod_hdr_attach+0x491/0x520 [mlx5_core]
[ 826.460507] ? mlx5e_mod_hdr_get+0x12/0x20 [mlx5_core]
[ 826.461046] ? mlx5e_tc_attach_mod_hdr+0x154/0x170 [mlx5_core]
[ 826.461635] mlx5e_configure_flower+0x969/0x2110 [mlx5_core]
[ 826.462217] ? _raw_spin_lock_bh+0x85/0xe0
[ 826.462597] ? __mlx5e_add_fdb_flow+0x750/0x750 [mlx5_core]
[ 826.463163] ? kasan_save_stack+0x2e/0x40
[ 826.463534] ? down_read+0x115/0x1b0
[ 826.463878] ? down_write_killable+0x110/0x110
[ 826.464288] ? tc_setup_action.part.0+0x9f/0x3b0
[ 826.464701] ? mlx5e_is_uplink_rep+0x4c/0x90 [mlx5_core]
[ 826.465253] ? mlx5e_tc_reoffload_flows_work+0x130/0x130 [mlx5_core]
[ 826.465878] tc_setup_cb_add+0x112/0x250
[ 826.466247] fl_hw_replace_filter+0x230/0x310 [cls_flower]
[ 826.466724] ? fl_hw_destroy_filter+0x1a0/0x1a0 [cls_flower]
[ 826.467212] fl_change+0x14e1/0x2030 [cls_flower]
[ 826.467636] ? sock_def_readable+0x89/0x120
[ 826.468019] ? fl_tmplt_create+0x2d0/0x2d0 [cls_flower]
[ 826.468509] ? kasan_unpoison+0x23/0x50
[ 826.468873] ? get_random_u16+0x180/0x180
[ 826.469244] ? __radix_tree_lookup+0x2b/0x130
[ 826.469640] ? fl_get+0x7b/0x140 [cls_flower]
[ 826.470042] ? fl_mask_put+0x200/0x200 [cls_flower]
[ 826.470478] ? __mutex_unlock_slowpath.constprop.0+0x210/0x210
[ 826.470973] ? fl_tmplt_create+0x2d0/0x2d0 [cls_flower]
[ 826.471427] tc_new_tfilter+0x644/0x1050
[ 826.471795] ? tc_get_tfilter+0x860/0x860
[ 826.472170] ? __thaw_task+0x130/0x130
[ 826.472525] ? arch_stack_walk+0x98/0xf0
[ 826.472892] ? cap_capable+0x9f/0xd0
[ 826.473235] ? security_capable+0x47/0x60
[ 826.473608] rtnetlink_rcv_msg+0x1d5/0x550
[ 826.473985] ? rtnl_calcit.isra.0+0x1f0/0x1f0
[ 826.474383] ? __stack_depot_save+0x35/0x4c0
[ 826.474779] ? kasan_save_stack+0x2e/0x40
[ 826.475149] ? kasan_save_stack+0x1e/0x40
[ 826.475518] ? __kasan_record_aux_stack+0x9f/0xb0
[ 826.475939] ? task_work_add+0x77/0x1c0
[ 826.476305] netlink_rcv_skb+0xe0/0x210
[ 826.476661] ? rtnl_calcit.isra.0+0x1f0/0x1f0
[ 826.477057] ? netlink_ack+0x7c0/0x7c0
[ 826.477412] ? rhashtable_jhash2+0xef/0x150
[ 826.477796] ? _copy_from_iter+0x105/0x770
[ 826.484386] netlink_unicast+0x346/0x490
[ 826.484755] ? netlink_attachskb+0x400/0x400
[ 826.485145] ? kernel_text_address+0xc2/0xd0
[ 826.485535] netlink_sendmsg+0x3b0/0x6c0
[ 826.485902] ? kernel_text_address+0xc2/0xd0
[ 826.486296] ? netlink_unicast+0x490/0x490
[ 826.486671] ? iovec_from_user.part.0+0x7a/0x1a0
[ 826.487083] ? netlink_unicast+0x490/0x490
[ 826.487461] sock_sendmsg+0x73/0xc0
[ 826.487803] ____sys_sendmsg+0x364/0x380
[ 826.488186] ? import_iovec+0x7/0x10
[ 826.488531] ? kernel_sendmsg+0x30/0x30
[ 826.488893] ? __copy_msghdr+0x180/0x180
[ 826.489258] ? kasan_save_stack+0x2e/0x40
[ 826.489629] ? kasan_save_stack+0x1e/0x40
[ 826.490002] ? __kasan_record_aux_stack+0x9f/0xb0
[ 826.490424] ? __call_rcu_common.constprop.0+0x46/0x580
[ 826.490876] ___sys_sendmsg+0xdf/0x140
[ 826.491231] ? copy_msghdr_from_user+0x110/0x110
[ 826.491649] ? fget_raw+0x120/0x120
[ 826.491988] ? ___sys_recvmsg+0xd9/0x130
[ 826.492355] ? folio_batch_add_and_move+0x80/0xa0
[ 826.492776] ? _raw_spin_lock+0x7a/0xd0
[ 826.493137] ? _raw_spin_lock+0x7a/0xd0
[ 826.493500] ? _raw_read_lock_irq+0x30/0x30
[ 826.493880] ? kasan_set_track+0x21/0x30
[ 826.494249] ? kasan_save_free_info+0x2a/0x40
[ 826.494650] ? do_sys_openat2+0xff/0x270
[ 826.495016] ? __fget_light+0x1b5/0x200
[ 826.495377] ? __virt_addr_valid+0xb1/0x130
[ 826.495763] __sys_sendmsg+0xb2/0x130
[ 826.496118] ? __sys_sendmsg_sock+0x20/0x20
[ 826.496501] ? __x64_sys_rseq+0x2e0/0x2e0
[ 826.496874] ? do_user_addr_fault+0x276/0x820
[ 826.497273] ? fpregs_assert_state_consistent+0x52/0x60
[ 826.497727] ? exit_to_user_mode_prepare+0x30/0x120
[ 826.498158] do_syscall_64+0x3d/0x90
[ 826.498502] entry_SYSCALL_64_after_hwframe+0x46/0xb0
[ 826.498949] RIP: 0033:0x7f9b67f4f887
[ 826.499294] Code: 0a 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b9 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 89 54 24 1c 48 89 74 24 10
[ 826.500742] RSP: 002b:00007fff5d1a5498 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
[ 826.501395] RAX: ffffffffffffffda RBX: 0000000064413ce6 RCX: 00007f9b67f4f887
[ 826.501975] RDX: 0000000000000000 RSI: 00007fff5d1a5500 RDI: 0000000000000003
[ 826.502556] RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000001
[ 826.503135] R10: 00007f9b67e08708 R11: 0000000000000246 R12: 0000000000000001
[ 826.503714] R13: 0000000000000001 R14: 00007fff5d1a9800 R15: 0000000000485400
[ 826.504304] </TASK>
[ 826.504753] Allocated by task 3764:
[ 826.505090] kasan_save_stack+0x1e/0x40
[ 826.505453] kasan_set_track+0x21/0x30
[ 826.505810] __kasan_kmalloc+0x77/0x90
[ 826.506164] __mlx5_create_flow_table+0x16d/0xbb0 [mlx5_core]
[ 826.506742] esw_offloads_enable+0x60d/0xfb0 [mlx5_core]
[ 826.507292] mlx5_eswitch_enable_locked+0x4d3/0x680 [mlx5_core]
[ 826.507885] mlx5_devlink_eswitch_mode_set+0x2a3/0x580 [mlx5_core]
[ 826.508513] devlink_nl_cmd_eswitch_set_doit+0xdf/0x1f0
[ 826.508969] genl_family_rcv_msg_doit.isra.0+0x146/0x1c0
[ 826.509427] genl_rcv_msg+0x28d/0x3e0
[ 826.509772] netlink_rcv_skb+0xe0/0x210
[ 826.510133] genl_rcv+0x24/0x40
[ 826.510448] netlink_unicast+0x346/0x490
[ 826.510810] netlink_sendmsg+0x3b0/0x6c0
[ 826.511179] sock_sendmsg+0x73/0xc0
[ 826.511519] __sys_sendto+0x18d/0x220
[ 826.511867] __x64_sys_sendto+0x72/0x80
[ 826.512232] do_syscall_64+0x3d/0x90
[ 826.512576] entry_SYSCALL_64_after_hwframe+0x46/0xb0
[ 826.513220] Freed by task 5674:
[ 826.513535] kasan_save_stack+0x1e/0x40
[ 826.513893] kasan_set_track+0x21/0x30
[ 826.514245] kasan_save_free_info+0x2a/0x40
[ 826.514629] ____kasan_slab_free+0x11a/0x1b0
[ 826.515021] __kmem_cache_free+0x14d/0x280
[ 826.515399] tree_put_node+0x109/0x1c0 [mlx5_core]
[ 826.515907] mlx5_destroy_flow_table+0x119/0x630 [mlx5_core]
[ 826.516481] esw_offloads_steering_cleanup+0xe7/0x150 [mlx5_core]
[ 826.517084] esw_offloads_disable+0xe0/0x160 [mlx5_core]
[ 826.517632] mlx5_eswitch_disable_locked+0x26c/0x290 [mlx5_core]
[ 826.518225] mlx5_devlink_eswitch_mode_set+0x128/0x580 [mlx5_core]
[ 826.518834] devlink_nl_cmd_eswitch_set_doit+0xdf/0x1f0
[ 826.519286] genl_family_rcv_msg_doit.isra.0+0x146/0x1c0
[ 826.519748] genl_rcv_msg+0x28d/0x3e0
[ 826.520101] netlink_rcv_skb+0xe0/0x210
[ 826.520458] genl_rcv+0x24/0x40
[ 826.520771] netlink_unicast+0x346/0x490
[ 826.521137] netlink_sendmsg+0x3b0/0x6c0
[ 826.521505] sock_sendmsg+0x73/0xc0
[ 826.521842] __sys_sendto+0x18d/0x220
[ 826.522191] __x64_sys_sendto+0x72/0x80
[ 826.522554] do_syscall_64+0x3d/0x90
[ 826.522894] entry_SYSCALL_64_after_hwframe+0x46/0xb0
[ 826.523540] Last potentially related work creation:
[ 826.523969] kasan_save_stack+0x1e/0x40
[ 826.524331] __kasan_record_aux_stack+0x9f/0xb0
[ 826.524739] insert_work+0x30/0x130
[ 826.525078] __queue_work+0x34b/0x690
[ 826.525426] queue_work_on+0x48/0x50
[ 826.525766] __rhashtable_remove_fast_one+0x4af/0x4d0 [mlx5_core]
[ 826.526365] del_sw_flow_group+0x1b5/0x270 [mlx5_core]
[ 826.526898] tree_put_node+0x109/0x1c0 [mlx5_core]
[ 826.527407] esw_offloads_steering_cleanup+0xd3/0x150 [mlx5_core]
[ 826.528009] esw_offloads_disable+0xe0/0x160 [mlx5_core]
[ 826.528616] mlx5_eswitch_disable_locked+0x26c/0x290 [mlx5_core]
[ 826.529218] mlx5_devlink_eswitch_mode_set+0x128/0x580 [mlx5_core]
[ 826.529823] devlink_nl_cmd_eswitch_set_doit+0xdf/0x1f0
[ 826.530276] genl_family_rcv_msg_doit.isra.0+0x146/0x1c0
[ 826.530733] genl_rcv_msg+0x28d/0x3e0
[ 826.531079] netlink_rcv_skb+0xe0/0x210
[ 826.531439] genl_rcv+0x24/0x40
[ 826.531755] netlink_unicast+0x346/0x490
[ 826.532123] netlink_sendmsg+0x3b0/0x6c0
[ 826.532487] sock_sendmsg+0x73/0xc0
[ 826.532825] __sys_sendto+0x18d/0x220
[ 826.533175] __x64_sys_sendto+0x72/0x80
[ 826.533533] do_syscall_64+0x3d/0x90
[ 826.533877] entry_SYSCALL_64_after_hwframe+0x46/0xb0
[ 826.534521] The buggy address belongs to the object at ffff888194485800
which belongs to the cache kmalloc-512 of size 512
[ 826.535506] The buggy address is located 48 bytes inside of
freed 512-byte region [ffff888194485800, ffff888194485a00)
[ 826.536666] The buggy address belongs to the physical page:
[ 826.537138] page:00000000d75841dd refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x194480
[ 826.537915] head:00000000d75841dd order:3 entire_mapcount:0 nr_pages_mapped:0 pincount:0
[ 826.538595] flags: 0x200000000010200(slab|head|node=0|zone=2)
[ 826.539089] raw: 0200000000010200 ffff888100042c80 ffffea0004523800 dead000000000002
[ 826.539755] raw: 0000000000000000 0000000000200020 00000001ffffffff 0000000000000000
[ 826.540417] page dumped because: kasan: bad access detected
[ 826.541095] Memory state around the buggy address:
[ 826.541519] ffff888194485700: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 826.542149] ffff888194485780: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 826.542773] >ffff888194485800: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 826.543400] ^
[ 826.543822] ffff888194485880: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 826.544452] ffff888194485900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 826.545079] ==================================================================
Fixes: 6702782845a5 ("net/mlx5e: TC, Set CT miss to the specific ct action instance")
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Reviewed-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Check in the mlx5e_ptp_poll_ts_cq context if the ptp tx sq should be woken
up. Before change, the ptp tx sq may never wake up if the ptp tx ts skb
fifo is full when mlx5e_poll_tx_cq checks if the queue should be woken up.
Fixes: 1880bc4e4a96 ("net/mlx5e: Add TX port timestamp support")
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Cited commit causes ABBA deadlock[0] when peer flows are created while
holding the devcom rw semaphore. Due to peer flows offload implementation
the lock is taken much higher up the call chain and there is no obvious way
to easily fix the deadlock. Instead, since tc route query code needs the
peer eswitch structure only to perform a lookup in xarray and doesn't
perform any sleeping operations with it, refactor the code for lockless
execution in following ways:
- RCUify the devcom 'data' pointer. When resetting the pointer
synchronously wait for RCU grace period before returning. This is fine
since devcom is currently only used for synchronization of
pairing/unpairing of eswitches which is rare and already expensive as-is.
- Wrap all usages of 'paired' boolean in {READ|WRITE}_ONCE(). The flag has
already been used in some unlocked contexts without proper
annotations (e.g. users of mlx5_devcom_is_paired() function), but it wasn't
an issue since all relevant code paths checked it again after obtaining the
devcom semaphore. Now it is also used by mlx5_devcom_get_peer_data_rcu() as
"best effort" check to return NULL when devcom is being unpaired. Note that
while RCU read lock doesn't prevent the unpaired flag from being changed
concurrently it still guarantees that reader can continue to use 'data'.
- Refactor mlx5e_tc_query_route_vport() function to use new
mlx5_devcom_get_peer_data_rcu() API which fixes the deadlock.
[0]:
[ 164.599612] ======================================================
[ 164.600142] WARNING: possible circular locking dependency detected
[ 164.600667] 6.3.0-rc3+ #1 Not tainted
[ 164.601021] ------------------------------------------------------
[ 164.601557] handler1/3456 is trying to acquire lock:
[ 164.601998] ffff88811f1714b0 (&esw->offloads.encap_tbl_lock){+.+.}-{3:3}, at: mlx5e_attach_encap+0xd8/0x8b0 [mlx5_core]
[ 164.603078]
but task is already holding lock:
[ 164.603617] ffff88810137fc98 (&comp->sem){++++}-{3:3}, at: mlx5_devcom_get_peer_data+0x37/0x80 [mlx5_core]
[ 164.604459]
which lock already depends on the new lock.
[ 164.605190]
the existing dependency chain (in reverse order) is:
[ 164.605848]
-> #1 (&comp->sem){++++}-{3:3}:
[ 164.606380] down_read+0x39/0x50
[ 164.606772] mlx5_devcom_get_peer_data+0x37/0x80 [mlx5_core]
[ 164.607336] mlx5e_tc_query_route_vport+0x86/0xc0 [mlx5_core]
[ 164.607914] mlx5e_tc_tun_route_lookup+0x1a4/0x1d0 [mlx5_core]
[ 164.608495] mlx5e_attach_decap_route+0xc6/0x1e0 [mlx5_core]
[ 164.609063] mlx5e_tc_add_fdb_flow+0x1ea/0x360 [mlx5_core]
[ 164.609627] __mlx5e_add_fdb_flow+0x2d2/0x430 [mlx5_core]
[ 164.610175] mlx5e_configure_flower+0x952/0x1a20 [mlx5_core]
[ 164.610741] tc_setup_cb_add+0xd4/0x200
[ 164.611146] fl_hw_replace_filter+0x14c/0x1f0 [cls_flower]
[ 164.611661] fl_change+0xc95/0x18a0 [cls_flower]
[ 164.612116] tc_new_tfilter+0x3fc/0xd20
[ 164.612516] rtnetlink_rcv_msg+0x418/0x5b0
[ 164.612936] netlink_rcv_skb+0x54/0x100
[ 164.613339] netlink_unicast+0x190/0x250
[ 164.613746] netlink_sendmsg+0x245/0x4a0
[ 164.614150] sock_sendmsg+0x38/0x60
[ 164.614522] ____sys_sendmsg+0x1d0/0x1e0
[ 164.614934] ___sys_sendmsg+0x80/0xc0
[ 164.615320] __sys_sendmsg+0x51/0x90
[ 164.615701] do_syscall_64+0x3d/0x90
[ 164.616083] entry_SYSCALL_64_after_hwframe+0x46/0xb0
[ 164.616568]
-> #0 (&esw->offloads.encap_tbl_lock){+.+.}-{3:3}:
[ 164.617210] __lock_acquire+0x159e/0x26e0
[ 164.617638] lock_acquire+0xc2/0x2a0
[ 164.618018] __mutex_lock+0x92/0xcd0
[ 164.618401] mlx5e_attach_encap+0xd8/0x8b0 [mlx5_core]
[ 164.618943] post_process_attr+0x153/0x2d0 [mlx5_core]
[ 164.619471] mlx5e_tc_add_fdb_flow+0x164/0x360 [mlx5_core]
[ 164.620021] __mlx5e_add_fdb_flow+0x2d2/0x430 [mlx5_core]
[ 164.620564] mlx5e_configure_flower+0xe33/0x1a20 [mlx5_core]
[ 164.621125] tc_setup_cb_add+0xd4/0x200
[ 164.621531] fl_hw_replace_filter+0x14c/0x1f0 [cls_flower]
[ 164.622047] fl_change+0xc95/0x18a0 [cls_flower]
[ 164.622500] tc_new_tfilter+0x3fc/0xd20
[ 164.622906] rtnetlink_rcv_msg+0x418/0x5b0
[ 164.623324] netlink_rcv_skb+0x54/0x100
[ 164.623727] netlink_unicast+0x190/0x250
[ 164.624138] netlink_sendmsg+0x245/0x4a0
[ 164.624544] sock_sendmsg+0x38/0x60
[ 164.624919] ____sys_sendmsg+0x1d0/0x1e0
[ 164.625340] ___sys_sendmsg+0x80/0xc0
[ 164.625731] __sys_sendmsg+0x51/0x90
[ 164.626117] do_syscall_64+0x3d/0x90
[ 164.626502] entry_SYSCALL_64_after_hwframe+0x46/0xb0
[ 164.626995]
other info that might help us debug this:
[ 164.627725] Possible unsafe locking scenario:
[ 164.628268] CPU0 CPU1
[ 164.628683] ---- ----
[ 164.629098] lock(&comp->sem);
[ 164.629421] lock(&esw->offloads.encap_tbl_lock);
[ 164.630066] lock(&comp->sem);
[ 164.630555] lock(&esw->offloads.encap_tbl_lock);
[ 164.630993]
*** DEADLOCK ***
[ 164.631575] 3 locks held by handler1/3456:
[ 164.631962] #0: ffff888124b75130 (&block->cb_lock){++++}-{3:3}, at: tc_setup_cb_add+0x5b/0x200
[ 164.632703] #1: ffff888116e512b8 (&esw->mode_lock){++++}-{3:3}, at: mlx5_esw_hold+0x39/0x50 [mlx5_core]
[ 164.633552] #2: ffff88810137fc98 (&comp->sem){++++}-{3:3}, at: mlx5_devcom_get_peer_data+0x37/0x80 [mlx5_core]
[ 164.634435]
stack backtrace:
[ 164.634883] CPU: 17 PID: 3456 Comm: handler1 Not tainted 6.3.0-rc3+ #1
[ 164.635431] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
[ 164.636340] Call Trace:
[ 164.636616] <TASK>
[ 164.636863] dump_stack_lvl+0x47/0x70
[ 164.637217] check_noncircular+0xfe/0x110
[ 164.637601] __lock_acquire+0x159e/0x26e0
[ 164.637977] ? mlx5_cmd_set_fte+0x5b0/0x830 [mlx5_core]
[ 164.638472] lock_acquire+0xc2/0x2a0
[ 164.638828] ? mlx5e_attach_encap+0xd8/0x8b0 [mlx5_core]
[ 164.639339] ? lock_is_held_type+0x98/0x110
[ 164.639728] __mutex_lock+0x92/0xcd0
[ 164.640074] ? mlx5e_attach_encap+0xd8/0x8b0 [mlx5_core]
[ 164.640576] ? __lock_acquire+0x382/0x26e0
[ 164.640958] ? mlx5e_attach_encap+0xd8/0x8b0 [mlx5_core]
[ 164.641468] ? mlx5e_attach_encap+0xd8/0x8b0 [mlx5_core]
[ 164.641965] mlx5e_attach_encap+0xd8/0x8b0 [mlx5_core]
[ 164.642454] ? lock_release+0xbf/0x240
[ 164.642819] post_process_attr+0x153/0x2d0 [mlx5_core]
[ 164.643318] mlx5e_tc_add_fdb_flow+0x164/0x360 [mlx5_core]
[ 164.643835] __mlx5e_add_fdb_flow+0x2d2/0x430 [mlx5_core]
[ 164.644340] mlx5e_configure_flower+0xe33/0x1a20 [mlx5_core]
[ 164.644862] ? lock_acquire+0xc2/0x2a0
[ 164.645219] tc_setup_cb_add+0xd4/0x200
[ 164.645588] fl_hw_replace_filter+0x14c/0x1f0 [cls_flower]
[ 164.646067] fl_change+0xc95/0x18a0 [cls_flower]
[ 164.646488] tc_new_tfilter+0x3fc/0xd20
[ 164.646861] ? tc_del_tfilter+0x810/0x810
[ 164.647236] rtnetlink_rcv_msg+0x418/0x5b0
[ 164.647621] ? rtnl_setlink+0x160/0x160
[ 164.647982] netlink_rcv_skb+0x54/0x100
[ 164.648348] netlink_unicast+0x190/0x250
[ 164.648722] netlink_sendmsg+0x245/0x4a0
[ 164.649090] sock_sendmsg+0x38/0x60
[ 164.649434] ____sys_sendmsg+0x1d0/0x1e0
[ 164.649804] ? copy_msghdr_from_user+0x6d/0xa0
[ 164.650213] ___sys_sendmsg+0x80/0xc0
[ 164.650563] ? lock_acquire+0xc2/0x2a0
[ 164.650926] ? lock_acquire+0xc2/0x2a0
[ 164.651286] ? __fget_files+0x5/0x190
[ 164.651644] ? find_held_lock+0x2b/0x80
[ 164.652006] ? __fget_files+0xb9/0x190
[ 164.652365] ? lock_release+0xbf/0x240
[ 164.652723] ? __fget_files+0xd3/0x190
[ 164.653079] __sys_sendmsg+0x51/0x90
[ 164.653435] do_syscall_64+0x3d/0x90
[ 164.653784] entry_SYSCALL_64_after_hwframe+0x46/0xb0
[ 164.654229] RIP: 0033:0x7f378054f8bd
[ 164.654577] Code: 28 89 54 24 1c 48 89 74 24 10 89 7c 24 08 e8 6a c3 f4 ff 8b 54 24 1c 48 8b 74 24 10 41 89 c0 8b 7c 24 08 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 33 44 89 c7 48 89 44 24 08 e8 be c3 f4 ff 48
[ 164.656041] RSP: 002b:00007f377fa114b0 EFLAGS: 00000293 ORIG_RAX: 000000000000002e
[ 164.656701] RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007f378054f8bd
[ 164.657297] RDX: 0000000000000000 RSI: 00007f377fa11540 RDI: 0000000000000014
[ 164.657885] RBP: 00007f377fa12278 R08: 0000000000000000 R09: 000000000000015c
[ 164.658472] R10: 00007f377fa123d0 R11: 0000000000000293 R12: 0000560962d99bd0
[ 164.665317] R13: 0000000000000000 R14: 0000560962d99bd0 R15: 00007f377fa11540
Fixes: f9d196bd632b ("net/mlx5e: Use correct eswitch for stack devices with lag")
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Fix spacing for the error and also the correct error code pointer.
Fixes: c9b9dcb430b3 ("net/mlx5: Move device memory management to mlx5_core")
Signed-off-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
With introduction of post action infrastructure most of the users of encap
attribute had been modified in order to obtain the correct attribute by
calling mlx5e_tc_get_encap_attr() helper instead of assuming encap action
is always on default attribute. However, the cited commit didn't modify
mlx5e_invalidate_encap() which prevents it from destroying correct modify
header action which leads to a warning [0]. Fix the issue by using correct
attribute.
[0]:
Feb 21 09:47:35 c-237-177-40-045 kernel: WARNING: CPU: 17 PID: 654 at drivers/net/ethernet/mellanox/mlx5/core/en_tc.c:684 mlx5e_tc_attach_mod_hdr+0x1cc/0x230 [mlx5_core]
Feb 21 09:47:35 c-237-177-40-045 kernel: RIP: 0010:mlx5e_tc_attach_mod_hdr+0x1cc/0x230 [mlx5_core]
Feb 21 09:47:35 c-237-177-40-045 kernel: Call Trace:
Feb 21 09:47:35 c-237-177-40-045 kernel: <TASK>
Feb 21 09:47:35 c-237-177-40-045 kernel: mlx5e_tc_fib_event_work+0x8e3/0x1f60 [mlx5_core]
Feb 21 09:47:35 c-237-177-40-045 kernel: ? mlx5e_take_all_encap_flows+0xe0/0xe0 [mlx5_core]
Feb 21 09:47:35 c-237-177-40-045 kernel: ? lock_downgrade+0x6d0/0x6d0
Feb 21 09:47:35 c-237-177-40-045 kernel: ? lockdep_hardirqs_on_prepare+0x273/0x3f0
Feb 21 09:47:35 c-237-177-40-045 kernel: ? lockdep_hardirqs_on_prepare+0x273/0x3f0
Feb 21 09:47:35 c-237-177-40-045 kernel: process_one_work+0x7c2/0x1310
Feb 21 09:47:35 c-237-177-40-045 kernel: ? lockdep_hardirqs_on_prepare+0x3f0/0x3f0
Feb 21 09:47:35 c-237-177-40-045 kernel: ? pwq_dec_nr_in_flight+0x230/0x230
Feb 21 09:47:35 c-237-177-40-045 kernel: ? rwlock_bug.part.0+0x90/0x90
Feb 21 09:47:35 c-237-177-40-045 kernel: worker_thread+0x59d/0xec0
Feb 21 09:47:35 c-237-177-40-045 kernel: ? __kthread_parkme+0xd9/0x1d0
Fixes: 8300f225268b ("net/mlx5e: Create new flow attr for multi table actions")
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
SW Steering uses RC QP for writing STEs to ICM. This writingis done in LB
(loopback), and FL (force-loopback) QP is preferred for performance. FL is
available when RoCE is enabled or disabled based on RoCE caps.
This patch adds reading of FL capability from HCA caps in addition to the
existing reading from RoCE caps, thus fixing the case where we didn't
have loopback enabled when RoCE was disabled.
Fixes: 7304d603a57a ("net/mlx5: DR, Add support for force-loopback QP")
Signed-off-by: Itamar Gozlan <igozlan@nvidia.com>
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
When calculating crc for hash index we use the function crc32 that
calculates for little-endian (LE) arch.
Then we convert it to network endianness using htonl(), but it's wrong
to do the conversion in BE archs since the crc32 value is already LE.
The solution is to switch the bytes from the crc result for all types
of arc.
Fixes: 40416d8ede65 ("net/mlx5: DR, Replace CRC32 implementation to use kernel lib")
Signed-off-by: Erez Shitrit <erezsh@nvidia.com>
Reviewed-by: Alex Vesker <valex@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
In case user switch a device from switchdev mode to legacy mode, mlx5
first unpair the E-switch and afterwards unload the uplink vport.
From the other hand, in case user remove or reload a device, mlx5
first unload the uplink vport and afterwards unpair the E-switch.
The latter is causing a bug[1], hence, handle pairing of E-switch as
part of uplink un/load APIs.
[1]
In case VF_LAG is used, every tc fdb flow is duplicated to the peer
esw. However, the original esw keeps a pointer to this duplicated
flow, not the peer esw.
e.g.: if user create tc fdb flow over esw0, the flow is duplicated
over esw1, in FW/HW, but in SW, esw0 keeps a pointer to the duplicated
flow.
During module unload while a peer tc fdb flow is still offloaded, in
case the first device to be removed is the peer device (esw1 in the
example above), the peer net-dev is destroyed, and so the mlx5e_priv
is memset to 0.
Afterwards, the peer device is trying to unpair himself from the
original device (esw0 in the example above). Unpair API invoke the
original device to clear peer flow from its eswitch (esw0), but the
peer flow, which is stored over the original eswitch (esw0), is
trying to use the peer mlx5e_priv, which is memset to 0 and result in
bellow kernel-oops.
[ 157.964081 ] BUG: unable to handle page fault for address: 000000000002ce60
[ 157.964662 ] #PF: supervisor read access in kernel mode
[ 157.965123 ] #PF: error_code(0x0000) - not-present page
[ 157.965582 ] PGD 0 P4D 0
[ 157.965866 ] Oops: 0000 [#1] SMP
[ 157.967670 ] RIP: 0010:mlx5e_tc_del_fdb_flow+0x48/0x460 [mlx5_core]
[ 157.976164 ] Call Trace:
[ 157.976437 ] <TASK>
[ 157.976690 ] __mlx5e_tc_del_fdb_peer_flow+0xe6/0x100 [mlx5_core]
[ 157.977230 ] mlx5e_tc_clean_fdb_peer_flows+0x67/0x90 [mlx5_core]
[ 157.977767 ] mlx5_esw_offloads_unpair+0x2d/0x1e0 [mlx5_core]
[ 157.984653 ] mlx5_esw_offloads_devcom_event+0xbf/0x130 [mlx5_core]
[ 157.985212 ] mlx5_devcom_send_event+0xa3/0xb0 [mlx5_core]
[ 157.985714 ] esw_offloads_disable+0x5a/0x110 [mlx5_core]
[ 157.986209 ] mlx5_eswitch_disable_locked+0x152/0x170 [mlx5_core]
[ 157.986757 ] mlx5_eswitch_disable+0x51/0x80 [mlx5_core]
[ 157.987248 ] mlx5_unload+0x2a/0xb0 [mlx5_core]
[ 157.987678 ] mlx5_uninit_one+0x5f/0xd0 [mlx5_core]
[ 157.988127 ] remove_one+0x64/0xe0 [mlx5_core]
[ 157.988549 ] pci_device_remove+0x31/0xa0
[ 157.988933 ] device_release_driver_internal+0x18f/0x1f0
[ 157.989402 ] driver_detach+0x3f/0x80
[ 157.989754 ] bus_remove_driver+0x70/0xf0
[ 157.990129 ] pci_unregister_driver+0x34/0x90
[ 157.990537 ] mlx5_cleanup+0xc/0x1c [mlx5_core]
[ 157.990972 ] __x64_sys_delete_module+0x15a/0x250
[ 157.991398 ] ? exit_to_user_mode_prepare+0xea/0x110
[ 157.991840 ] do_syscall_64+0x3d/0x90
[ 157.992198 ] entry_SYSCALL_64_after_hwframe+0x46/0xb0
Fixes: 04de7dda7394 ("net/mlx5e: Infrastructure for duplicated offloading of TC flows")
Fixes: 1418ddd96afd ("net/mlx5e: Duplicate offloaded TC eswitch rules under uplink LAG")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
DEVX can issue a general command, which is not used by mlx5 driver.
In case such command is failed, mlx5 is trying to collect the failure
data, However, mlx5 doesn't create a storage for this command, since
mlx5 doesn't use it. This lead to array-index-out-of-bounds error.
Fix it by checking whether the command is known before collecting the
failure data.
Fixes: 34f46ae0d4b3 ("net/mlx5: Add command failures data to debugfs")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Should tc589_config() fail, some resources need to be released as already
done in the remove function.
Fixes: 15b99ac17295 ("[PATCH] pcmcia: add return value to _config() functions")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/d8593ae867b24c79063646e36f9b18b0790107cb.1684575975.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If an error occures after calling nv_mgmt_acquire_sema(), it should be
undone with a corresponding nv_mgmt_release_sema() call.
Add it in the error handling path of the probe as already done in the
remove function.
Fixes: cac1c52c3621 ("forcedeth: mgmt unit interface")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Zhu Yanjun <zyjzyj2000@gmail.com>
Link: https://lore.kernel.org/r/355e9a7d351b32ad897251b6f81b5886fcdc6766.1684571393.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- Fix compiler warnings on btnxpuart
- Fix potential double free on hci_conn_unlink
- Fix UAF on hci_conn_hash_flush
* tag 'for-net-2023-05-19' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: btnxpuart: Fix compiler warnings
Bluetooth: Unlink CISes when LE disconnects in hci_conn_del
Bluetooth: Fix UAF in hci_conn_hash_flush again
Bluetooth: Refcnt drop must be placed last in hci_conn_unlink
Bluetooth: Fix potential double free caused by hci_conn_unlink
====================
Link: https://lore.kernel.org/r/20230519233056.2024340-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When the virtual interface's feature is updated, it synchronizes the
updated feature for its own lower interface.
This propagation logic should be worked as the iteration, not recursively.
But it works recursively due to the netdev notification unexpectedly.
This problem occurs when it disables LRO only for the team and bonding
interface type.
team0
|
+------+------+-----+-----+
| | | | |
team1 team2 team3 ... team200
If team0's LRO feature is updated, it generates the NETDEV_FEAT_CHANGE
event to its own lower interfaces(team1 ~ team200).
It is worked by netdev_sync_lower_features().
So, the NETDEV_FEAT_CHANGE notification logic of each lower interface
work iteratively.
But generated NETDEV_FEAT_CHANGE event is also sent to the upper
interface too.
upper interface(team0) generates the NETDEV_FEAT_CHANGE event for its own
lower interfaces again.
lower and upper interfaces receive this event and generate this
event again and again.
So, the stack overflow occurs.
But it is not the infinite loop issue.
Because the netdev_sync_lower_features() updates features before
generating the NETDEV_FEAT_CHANGE event.
Already synchronized lower interfaces skip notification logic.
So, it is just the problem that iteration logic is changed to the
recursive unexpectedly due to the notification mechanism.
Reproducer:
ip link add team0 type team
ethtool -K team0 lro on
for i in {1..200}
do
ip link add team$i master team0 type team
ethtool -K team$i lro on
done
ethtool -K team0 lro off
In order to fix it, the notifier_ctx member of bonding/team is introduced.
Reported-by: syzbot+60748c96cf5c6df8e581@syzkaller.appspotmail.com
Fixes: fd867d51f889 ("net/core: generic support for disabling netdev features down stack")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20230517143010.3596250-1-ap420073@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
