summaryrefslogtreecommitdiff
path: root/fs/btrfs
AgeCommit message (Collapse)AuthorFilesLines
2025-04-10btrfs: handle errors from btrfs_dec_ref() properlyJosef Bacik1-1/+4
commit 5eb178f373b4f16f3b42d55ff88fc94dd95b93b1 upstream. In walk_up_proc() we BUG_ON(ret) from btrfs_dec_ref(). This is incorrect, we have proper error handling here, return the error. Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Jianqi Ren <jianqi.ren.cn@windriver.com> Signed-off-by: He Zhe <zhe.he@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-21btrfs: fix hole expansion when writing at an offset beyond EOFFilipe Manana1-3/+1
commit da2dccd7451de62b175fb8f0808d644959e964c7 upstream. At btrfs_write_check() if our file's i_size is not sector size aligned and we have a write that starts at an offset larger than the i_size that falls within the same page of the i_size, then we end up not zeroing the file range [i_size, write_offset). The code is this: start_pos = round_down(pos, fs_info->sectorsize); oldsize = i_size_read(inode); if (start_pos > oldsize) { /* Expand hole size to cover write data, preventing empty gap */ loff_t end_pos = round_up(pos + count, fs_info->sectorsize); ret = btrfs_cont_expand(BTRFS_I(inode), oldsize, end_pos); if (ret) return ret; } So if our file's i_size is 90269 bytes and a write at offset 90365 bytes comes in, we get 'start_pos' set to 90112 bytes, which is less than the i_size and therefore we don't zero out the range [90269, 90365) by calling btrfs_cont_expand(). This is an old bug introduced in commit 9036c10208e1 ("Btrfs: update hole handling v2"), from 2008, and the buggy code got moved around over the years. Fix this by discarding 'start_pos' and comparing against the write offset ('pos') without any alignment. This bug was recently exposed by test case generic/363 which tests this scenario by polluting ranges beyond EOF with an mmap write and than verify that after a file increases we get zeroes for the range which is supposed to be a hole and not what we wrote with the previous mmaped write. We're only seeing this exposed now because generic/363 used to run only on xfs until last Sunday's fstests update. The test was failing like this: $ ./check generic/363 FSTYP -- btrfs PLATFORM -- Linux/x86_64 debian0 6.13.0-rc7-btrfs-next-185+ #17 SMP PREEMPT_DYNAMIC Mon Feb 3 12:28:46 WET 2025 MKFS_OPTIONS -- /dev/sdc MOUNT_OPTIONS -- /dev/sdc /home/fdmanana/btrfs-tests/scratch_1 generic/363 0s ... [failed, exit status 1]- output mismatch (see /home/fdmanana/git/hub/xfstests/results//generic/363.out.bad) # --- tests/generic/363.out 2025-02-05 15:31:14.013646509 +0000 # +++ /home/fdmanana/git/hub/xfstests/results//generic/363.out.bad 2025-02-05 17:25:33.112630781 +0000 @@ -1 +1,46 @@ QA output created by 363 +READ BAD DATA: offset = 0xdcad, size = 0xd921, fname = /home/fdmanana/btrfs-tests/dev/junk +OFFSET GOOD BAD RANGE +0x1609d 0x0000 0x3104 0x0 +operation# (mod 256) for the bad data may be 4 +0x1609e 0x0000 0x0472 0x1 +operation# (mod 256) for the bad data may be 4 ... (Run 'diff -u /home/fdmanana/git/hub/xfstests/tests/generic/363.out /home/fdmanana/git/hub/xfstests/results//generic/363.out.bad' to see the entire diff) Ran: generic/363 Failures: generic/363 Failed 1 of 1 tests Fixes: 9036c10208e1 ("Btrfs: update hole handling v2") CC: stable@vger.kernel.org Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-21btrfs: avoid monopolizing a core when activating a swap fileFilipe Manana1-0/+2
commit 2c8507c63f5498d4ee4af404a8e44ceae4345056 upstream. This commit re-attempts the backport of the change to the linux-6.1.y branch. Commit bb8e287f596b ("btrfs: avoid monopolizing a core when activating a swap file") on this branch was reverted. During swap activation we iterate over the extents of a file and we can have many thousands of them, so we can end up in a busy loop monopolizing a core. Avoid this by doing a voluntary reschedule after processing each extent. CC: stable@vger.kernel.org # 5.4+ Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Koichiro Den <koichiro.den@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-21Revert "btrfs: avoid monopolizing a core when activating a swap file"Koichiro Den1-2/+0
This reverts commit bb8e287f596b62fac18ed84cc03a9f1752f6b3b8. The backport for linux-6.1.y, commit bb8e287f596b ("btrfs: avoid monopolizing a core when activating a swap file"), inserted cond_resched() in the wrong location. Revert it now; a subsequent commit will re-backport the original patch. Fixes: bb8e287f596b ("btrfs: avoid monopolizing a core when activating a swap file") # linux-6.1.y Signed-off-by: Koichiro Den <koichiro.den@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-21btrfs: convert BUG_ON in btrfs_reloc_cow_block() to proper error handlingJosef Bacik1-2/+12
[ Upstream commit 6a4730b325aaa48f7a5d5ba97aff0a955e2d9cec ] This BUG_ON is meant to catch backref cache problems, but these can arise from either bugs in the backref cache or corruption in the extent tree. Fix it to be a proper error. Reviewed-by: Boris Burkov <boris@bur.io> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-21btrfs: fix data race when accessing the inode's disk_i_size at ↵Hao-ran Zheng1-1/+1
btrfs_drop_extents() [ Upstream commit 5324c4e10e9c2ce307a037e904c0d9671d7137d9 ] A data race occurs when the function `insert_ordered_extent_file_extent()` and the function `btrfs_inode_safe_disk_i_size_write()` are executed concurrently. The function `insert_ordered_extent_file_extent()` is not locked when reading inode->disk_i_size, causing `btrfs_inode_safe_disk_i_size_write()` to cause data competition when writing inode->disk_i_size, thus affecting the value of `modify_tree`. The specific call stack that appears during testing is as follows: ============DATA_RACE============ btrfs_drop_extents+0x89a/0xa060 [btrfs] insert_reserved_file_extent+0xb54/0x2960 [btrfs] insert_ordered_extent_file_extent+0xff5/0x1760 [btrfs] btrfs_finish_one_ordered+0x1b85/0x36a0 [btrfs] btrfs_finish_ordered_io+0x37/0x60 [btrfs] finish_ordered_fn+0x3e/0x50 [btrfs] btrfs_work_helper+0x9c9/0x27a0 [btrfs] process_scheduled_works+0x716/0xf10 worker_thread+0xb6a/0x1190 kthread+0x292/0x330 ret_from_fork+0x4d/0x80 ret_from_fork_asm+0x1a/0x30 ============OTHER_INFO============ btrfs_inode_safe_disk_i_size_write+0x4ec/0x600 [btrfs] btrfs_finish_one_ordered+0x24c7/0x36a0 [btrfs] btrfs_finish_ordered_io+0x37/0x60 [btrfs] finish_ordered_fn+0x3e/0x50 [btrfs] btrfs_work_helper+0x9c9/0x27a0 [btrfs] process_scheduled_works+0x716/0xf10 worker_thread+0xb6a/0x1190 kthread+0x292/0x330 ret_from_fork+0x4d/0x80 ret_from_fork_asm+0x1a/0x30 ================================= The main purpose of the check of the inode's disk_i_size is to avoid taking write locks on a btree path when we have a write at or beyond EOF, since in these cases we don't expect to find extent items in the root to drop. However if we end up taking write locks due to a data race on disk_i_size, everything is still correct, we only add extra lock contention on the tree in case there's concurrency from other tasks. If the race causes us to not take write locks when we actually need them, then everything is functionally correct as well, since if we find out we have extent items to drop and we took read locks (modify_tree set to 0), we release the path and retry again with write locks. Since this data race does not affect the correctness of the function, it is a harmless data race, use data_race() to check inode->disk_i_size. Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Hao-ran Zheng <zhenghaoran154@gmail.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-21btrfs: fix use-after-free when attempting to join an aborted transactionFilipe Manana1-1/+3
[ Upstream commit e2f0943cf37305dbdeaf9846e3c941451bcdef63 ] When we are trying to join the current transaction and if it's aborted, we read its 'aborted' field after unlocking fs_info->trans_lock and without holding any extra reference count on it. This means that a concurrent task that is aborting the transaction may free the transaction before we read its 'aborted' field, leading to a use-after-free. Fix this by reading the 'aborted' field while holding fs_info->trans_lock since any freeing task must first acquire that lock and set fs_info->running_transaction to NULL before freeing the transaction. This was reported by syzbot and Dmitry with the following stack traces from KASAN: ================================================================== BUG: KASAN: slab-use-after-free in join_transaction+0xd9b/0xda0 fs/btrfs/transaction.c:278 Read of size 4 at addr ffff888011839024 by task kworker/u4:9/1128 CPU: 0 UID: 0 PID: 1128 Comm: kworker/u4:9 Not tainted 6.13.0-rc7-syzkaller-00019-gc45323b7560e #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 Workqueue: events_unbound btrfs_async_reclaim_data_space Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0x169/0x550 mm/kasan/report.c:489 kasan_report+0x143/0x180 mm/kasan/report.c:602 join_transaction+0xd9b/0xda0 fs/btrfs/transaction.c:278 start_transaction+0xaf8/0x1670 fs/btrfs/transaction.c:697 flush_space+0x448/0xcf0 fs/btrfs/space-info.c:803 btrfs_async_reclaim_data_space+0x159/0x510 fs/btrfs/space-info.c:1321 process_one_work kernel/workqueue.c:3236 [inline] process_scheduled_works+0xa66/0x1840 kernel/workqueue.c:3317 worker_thread+0x870/0xd30 kernel/workqueue.c:3398 kthread+0x2f0/0x390 kernel/kthread.c:389 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 </TASK> Allocated by task 5315: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3f/0x80 mm/kasan/common.c:68 poison_kmalloc_redzone mm/kasan/common.c:377 [inline] __kasan_kmalloc+0x98/0xb0 mm/kasan/common.c:394 kasan_kmalloc include/linux/kasan.h:260 [inline] __kmalloc_cache_noprof+0x243/0x390 mm/slub.c:4329 kmalloc_noprof include/linux/slab.h:901 [inline] join_transaction+0x144/0xda0 fs/btrfs/transaction.c:308 start_transaction+0xaf8/0x1670 fs/btrfs/transaction.c:697 btrfs_create_common+0x1b2/0x2e0 fs/btrfs/inode.c:6572 lookup_open fs/namei.c:3649 [inline] open_last_lookups fs/namei.c:3748 [inline] path_openat+0x1c03/0x3590 fs/namei.c:3984 do_filp_open+0x27f/0x4e0 fs/namei.c:4014 do_sys_openat2+0x13e/0x1d0 fs/open.c:1402 do_sys_open fs/open.c:1417 [inline] __do_sys_creat fs/open.c:1495 [inline] __se_sys_creat fs/open.c:1489 [inline] __x64_sys_creat+0x123/0x170 fs/open.c:1489 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task 5336: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3f/0x80 mm/kasan/common.c:68 kasan_save_free_info+0x40/0x50 mm/kasan/generic.c:582 poison_slab_object mm/kasan/common.c:247 [inline] __kasan_slab_free+0x59/0x70 mm/kasan/common.c:264 kasan_slab_free include/linux/kasan.h:233 [inline] slab_free_hook mm/slub.c:2353 [inline] slab_free mm/slub.c:4613 [inline] kfree+0x196/0x430 mm/slub.c:4761 cleanup_transaction fs/btrfs/transaction.c:2063 [inline] btrfs_commit_transaction+0x2c97/0x3720 fs/btrfs/transaction.c:2598 insert_balance_item+0x1284/0x20b0 fs/btrfs/volumes.c:3757 btrfs_balance+0x992/0x10c0 fs/btrfs/volumes.c:4633 btrfs_ioctl_balance+0x493/0x7c0 fs/btrfs/ioctl.c:3670 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:906 [inline] __se_sys_ioctl+0xf5/0x170 fs/ioctl.c:892 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f The buggy address belongs to the object at ffff888011839000 which belongs to the cache kmalloc-2k of size 2048 The buggy address is located 36 bytes inside of freed 2048-byte region [ffff888011839000, ffff888011839800) The buggy address belongs to the physical page: page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x11838 head: order:3 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0 flags: 0xfff00000000040(head|node=0|zone=1|lastcpupid=0x7ff) page_type: f5(slab) raw: 00fff00000000040 ffff88801ac42000 ffffea0000493400 dead000000000002 raw: 0000000000000000 0000000000080008 00000001f5000000 0000000000000000 head: 00fff00000000040 ffff88801ac42000 ffffea0000493400 dead000000000002 head: 0000000000000000 0000000000080008 00000001f5000000 0000000000000000 head: 00fff00000000003 ffffea0000460e01 ffffffffffffffff 0000000000000000 head: 0000000000000008 0000000000000000 00000000ffffffff 0000000000000000 page dumped because: kasan: bad access detected page_owner tracks the page as allocated page last allocated via order 3, migratetype Unmovable, gfp_mask 0xd20c0(__GFP_IO|__GFP_FS|__GFP_NOWARN|__GFP_NORETRY|__GFP_COMP|__GFP_NOMEMALLOC), pid 57, tgid 57 (kworker/0:2), ts 67248182943, free_ts 67229742023 set_page_owner include/linux/page_owner.h:32 [inline] post_alloc_hook+0x1f3/0x230 mm/page_alloc.c:1558 prep_new_page mm/page_alloc.c:1566 [inline] get_page_from_freelist+0x365c/0x37a0 mm/page_alloc.c:3476 __alloc_pages_noprof+0x292/0x710 mm/page_alloc.c:4753 alloc_pages_mpol_noprof+0x3e1/0x780 mm/mempolicy.c:2269 alloc_slab_page+0x6a/0x110 mm/slub.c:2423 allocate_slab+0x5a/0x2b0 mm/slub.c:2589 new_slab mm/slub.c:2642 [inline] ___slab_alloc+0xc27/0x14a0 mm/slub.c:3830 __slab_alloc+0x58/0xa0 mm/slub.c:3920 __slab_alloc_node mm/slub.c:3995 [inline] slab_alloc_node mm/slub.c:4156 [inline] __do_kmalloc_node mm/slub.c:4297 [inline] __kmalloc_node_track_caller_noprof+0x2e9/0x4c0 mm/slub.c:4317 kmalloc_reserve+0x111/0x2a0 net/core/skbuff.c:609 __alloc_skb+0x1f3/0x440 net/core/skbuff.c:678 alloc_skb include/linux/skbuff.h:1323 [inline] alloc_skb_with_frags+0xc3/0x820 net/core/skbuff.c:6612 sock_alloc_send_pskb+0x91a/0xa60 net/core/sock.c:2884 sock_alloc_send_skb include/net/sock.h:1803 [inline] mld_newpack+0x1c3/0xaf0 net/ipv6/mcast.c:1747 add_grhead net/ipv6/mcast.c:1850 [inline] add_grec+0x1492/0x19a0 net/ipv6/mcast.c:1988 mld_send_cr net/ipv6/mcast.c:2114 [inline] mld_ifc_work+0x691/0xd90 net/ipv6/mcast.c:2651 page last free pid 5300 tgid 5300 stack trace: reset_page_owner include/linux/page_owner.h:25 [inline] free_pages_prepare mm/page_alloc.c:1127 [inline] free_unref_page+0xd3f/0x1010 mm/page_alloc.c:2659 __slab_free+0x2c2/0x380 mm/slub.c:4524 qlink_free mm/kasan/quarantine.c:163 [inline] qlist_free_all+0x9a/0x140 mm/kasan/quarantine.c:179 kasan_quarantine_reduce+0x14f/0x170 mm/kasan/quarantine.c:286 __kasan_slab_alloc+0x23/0x80 mm/kasan/common.c:329 kasan_slab_alloc include/linux/kasan.h:250 [inline] slab_post_alloc_hook mm/slub.c:4119 [inline] slab_alloc_node mm/slub.c:4168 [inline] __do_kmalloc_node mm/slub.c:4297 [inline] __kmalloc_noprof+0x236/0x4c0 mm/slub.c:4310 kmalloc_noprof include/linux/slab.h:905 [inline] kzalloc_noprof include/linux/slab.h:1037 [inline] fib_create_info+0xc14/0x25b0 net/ipv4/fib_semantics.c:1435 fib_table_insert+0x1f6/0x1f20 net/ipv4/fib_trie.c:1231 fib_magic+0x3d8/0x620 net/ipv4/fib_frontend.c:1112 fib_add_ifaddr+0x40c/0x5e0 net/ipv4/fib_frontend.c:1156 fib_netdev_event+0x375/0x490 net/ipv4/fib_frontend.c:1494 notifier_call_chain+0x1a5/0x3f0 kernel/notifier.c:85 __dev_notify_flags+0x207/0x400 dev_change_flags+0xf0/0x1a0 net/core/dev.c:9045 do_setlink+0xc90/0x4210 net/core/rtnetlink.c:3109 rtnl_changelink net/core/rtnetlink.c:3723 [inline] __rtnl_newlink net/core/rtnetlink.c:3875 [inline] rtnl_newlink+0x1bb6/0x2210 net/core/rtnetlink.c:4012 Memory state around the buggy address: ffff888011838f00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff888011838f80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc >ffff888011839000: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff888011839080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff888011839100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ================================================================== Reported-by: syzbot+45212e9d87a98c3f5b42@syzkaller.appspotmail.com Link: https://lore.kernel.org/linux-btrfs/678e7da5.050a0220.303755.007c.GAE@google.com/ Reported-by: Dmitry Vyukov <dvyukov@google.com> Link: https://lore.kernel.org/linux-btrfs/CACT4Y+ZFBdo7pT8L2AzM=vegZwjp-wNkVJZQf0Ta3vZqtExaSw@mail.gmail.com/ Fixes: 871383be592b ("btrfs: add missing unlocks to transaction abort paths") Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-21btrfs: output the reason for open_ctree() failureQu Wenruo1-1/+1
commit d0f038104fa37380e2a725e669508e43d0c503e9 upstream. There is a recent ML report that mounting a large fs backed by hardware RAID56 controller (with one device missing) took too much time, and systemd seems to kill the mount attempt. In that case, the only error message is: BTRFS error (device sdj): open_ctree failed There is no reason on why the failure happened, making it very hard to understand the reason. At least output the error number (in the particular case it should be -EINTR) to provide some clue. Link: https://lore.kernel.org/linux-btrfs/9b9c4d2810abcca2f9f76e32220ed9a90febb235.camel@scientia.org/ Reported-by: Christoph Anton Mitterer <calestyo@scientia.org> Cc: stable@vger.kernel.org Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-01-09btrfs: flush delalloc workers queue before stopping cleaner kthread during ↵Filipe Manana1-0/+9
unmount [ Upstream commit f10bef73fb355e3fc85e63a50386798be68ff486 ] During the unmount path, at close_ctree(), we first stop the cleaner kthread, using kthread_stop() which frees the associated task_struct, and then stop and destroy all the work queues. However after we stopped the cleaner we may still have a worker from the delalloc_workers queue running inode.c:submit_compressed_extents(), which calls btrfs_add_delayed_iput(), which in turn tries to wake up the cleaner kthread - which was already destroyed before, resulting in a use-after-free on the task_struct. Syzbot reported this with the following stack traces: BUG: KASAN: slab-use-after-free in __lock_acquire+0x78/0x2100 kernel/locking/lockdep.c:5089 Read of size 8 at addr ffff8880259d2818 by task kworker/u8:3/52 CPU: 1 UID: 0 PID: 52 Comm: kworker/u8:3 Not tainted 6.13.0-rc1-syzkaller-00002-gcdd30ebb1b9f #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 Workqueue: btrfs-delalloc btrfs_work_helper Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0x169/0x550 mm/kasan/report.c:489 kasan_report+0x143/0x180 mm/kasan/report.c:602 __lock_acquire+0x78/0x2100 kernel/locking/lockdep.c:5089 lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5849 __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline] _raw_spin_lock_irqsave+0xd5/0x120 kernel/locking/spinlock.c:162 class_raw_spinlock_irqsave_constructor include/linux/spinlock.h:551 [inline] try_to_wake_up+0xc2/0x1470 kernel/sched/core.c:4205 submit_compressed_extents+0xdf/0x16e0 fs/btrfs/inode.c:1615 run_ordered_work fs/btrfs/async-thread.c:288 [inline] btrfs_work_helper+0x96f/0xc40 fs/btrfs/async-thread.c:324 process_one_work kernel/workqueue.c:3229 [inline] process_scheduled_works+0xa66/0x1840 kernel/workqueue.c:3310 worker_thread+0x870/0xd30 kernel/workqueue.c:3391 kthread+0x2f0/0x390 kernel/kthread.c:389 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 </TASK> Allocated by task 2: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3f/0x80 mm/kasan/common.c:68 unpoison_slab_object mm/kasan/common.c:319 [inline] __kasan_slab_alloc+0x66/0x80 mm/kasan/common.c:345 kasan_slab_alloc include/linux/kasan.h:250 [inline] slab_post_alloc_hook mm/slub.c:4104 [inline] slab_alloc_node mm/slub.c:4153 [inline] kmem_cache_alloc_node_noprof+0x1d9/0x380 mm/slub.c:4205 alloc_task_struct_node kernel/fork.c:180 [inline] dup_task_struct+0x57/0x8c0 kernel/fork.c:1113 copy_process+0x5d1/0x3d50 kernel/fork.c:2225 kernel_clone+0x223/0x870 kernel/fork.c:2807 kernel_thread+0x1bc/0x240 kernel/fork.c:2869 create_kthread kernel/kthread.c:412 [inline] kthreadd+0x60d/0x810 kernel/kthread.c:767 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 Freed by task 24: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3f/0x80 mm/kasan/common.c:68 kasan_save_free_info+0x40/0x50 mm/kasan/generic.c:582 poison_slab_object mm/kasan/common.c:247 [inline] __kasan_slab_free+0x59/0x70 mm/kasan/common.c:264 kasan_slab_free include/linux/kasan.h:233 [inline] slab_free_hook mm/slub.c:2338 [inline] slab_free mm/slub.c:4598 [inline] kmem_cache_free+0x195/0x410 mm/slub.c:4700 put_task_struct include/linux/sched/task.h:144 [inline] delayed_put_task_struct+0x125/0x300 kernel/exit.c:227 rcu_do_batch kernel/rcu/tree.c:2567 [inline] rcu_core+0xaaa/0x17a0 kernel/rcu/tree.c:2823 handle_softirqs+0x2d4/0x9b0 kernel/softirq.c:554 run_ksoftirqd+0xca/0x130 kernel/softirq.c:943 smpboot_thread_fn+0x544/0xa30 kernel/smpboot.c:164 kthread+0x2f0/0x390 kernel/kthread.c:389 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 Last potentially related work creation: kasan_save_stack+0x3f/0x60 mm/kasan/common.c:47 __kasan_record_aux_stack+0xac/0xc0 mm/kasan/generic.c:544 __call_rcu_common kernel/rcu/tree.c:3086 [inline] call_rcu+0x167/0xa70 kernel/rcu/tree.c:3190 context_switch kernel/sched/core.c:5372 [inline] __schedule+0x1803/0x4be0 kernel/sched/core.c:6756 __schedule_loop kernel/sched/core.c:6833 [inline] schedule+0x14b/0x320 kernel/sched/core.c:6848 schedule_timeout+0xb0/0x290 kernel/time/sleep_timeout.c:75 do_wait_for_common kernel/sched/completion.c:95 [inline] __wait_for_common kernel/sched/completion.c:116 [inline] wait_for_common kernel/sched/completion.c:127 [inline] wait_for_completion+0x355/0x620 kernel/sched/completion.c:148 kthread_stop+0x19e/0x640 kernel/kthread.c:712 close_ctree+0x524/0xd60 fs/btrfs/disk-io.c:4328 generic_shutdown_super+0x139/0x2d0 fs/super.c:642 kill_anon_super+0x3b/0x70 fs/super.c:1237 btrfs_kill_super+0x41/0x50 fs/btrfs/super.c:2112 deactivate_locked_super+0xc4/0x130 fs/super.c:473 cleanup_mnt+0x41f/0x4b0 fs/namespace.c:1373 task_work_run+0x24f/0x310 kernel/task_work.c:239 ptrace_notify+0x2d2/0x380 kernel/signal.c:2503 ptrace_report_syscall include/linux/ptrace.h:415 [inline] ptrace_report_syscall_exit include/linux/ptrace.h:477 [inline] syscall_exit_work+0xc7/0x1d0 kernel/entry/common.c:173 syscall_exit_to_user_mode_prepare kernel/entry/common.c:200 [inline] __syscall_exit_to_user_mode_work kernel/entry/common.c:205 [inline] syscall_exit_to_user_mode+0x24a/0x340 kernel/entry/common.c:218 do_syscall_64+0x100/0x230 arch/x86/entry/common.c:89 entry_SYSCALL_64_after_hwframe+0x77/0x7f The buggy address belongs to the object at ffff8880259d1e00 which belongs to the cache task_struct of size 7424 The buggy address is located 2584 bytes inside of freed 7424-byte region [ffff8880259d1e00, ffff8880259d3b00) The buggy address belongs to the physical page: page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x259d0 head: order:3 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0 memcg:ffff88802f4b56c1 flags: 0xfff00000000040(head|node=0|zone=1|lastcpupid=0x7ff) page_type: f5(slab) raw: 00fff00000000040 ffff88801bafe500 dead000000000100 dead000000000122 raw: 0000000000000000 0000000000040004 00000001f5000000 ffff88802f4b56c1 head: 00fff00000000040 ffff88801bafe500 dead000000000100 dead000000000122 head: 0000000000000000 0000000000040004 00000001f5000000 ffff88802f4b56c1 head: 00fff00000000003 ffffea0000967401 ffffffffffffffff 0000000000000000 head: 0000000000000008 0000000000000000 00000000ffffffff 0000000000000000 page dumped because: kasan: bad access detected page_owner tracks the page as allocated page last allocated via order 3, migratetype Unmovable, gfp_mask 0xd20c0(__GFP_IO|__GFP_FS|__GFP_NOWARN|__GFP_NORETRY|__GFP_COMP|__GFP_NOMEMALLOC), pid 12, tgid 12 (kworker/u8:1), ts 7328037942, free_ts 0 set_page_owner include/linux/page_owner.h:32 [inline] post_alloc_hook+0x1f3/0x230 mm/page_alloc.c:1556 prep_new_page mm/page_alloc.c:1564 [inline] get_page_from_freelist+0x3651/0x37a0 mm/page_alloc.c:3474 __alloc_pages_noprof+0x292/0x710 mm/page_alloc.c:4751 alloc_pages_mpol_noprof+0x3e8/0x680 mm/mempolicy.c:2265 alloc_slab_page+0x6a/0x140 mm/slub.c:2408 allocate_slab+0x5a/0x2f0 mm/slub.c:2574 new_slab mm/slub.c:2627 [inline] ___slab_alloc+0xcd1/0x14b0 mm/slub.c:3815 __slab_alloc+0x58/0xa0 mm/slub.c:3905 __slab_alloc_node mm/slub.c:3980 [inline] slab_alloc_node mm/slub.c:4141 [inline] kmem_cache_alloc_node_noprof+0x269/0x380 mm/slub.c:4205 alloc_task_struct_node kernel/fork.c:180 [inline] dup_task_struct+0x57/0x8c0 kernel/fork.c:1113 copy_process+0x5d1/0x3d50 kernel/fork.c:2225 kernel_clone+0x223/0x870 kernel/fork.c:2807 user_mode_thread+0x132/0x1a0 kernel/fork.c:2885 call_usermodehelper_exec_work+0x5c/0x230 kernel/umh.c:171 process_one_work kernel/workqueue.c:3229 [inline] process_scheduled_works+0xa66/0x1840 kernel/workqueue.c:3310 worker_thread+0x870/0xd30 kernel/workqueue.c:3391 page_owner free stack trace missing Memory state around the buggy address: ffff8880259d2700: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8880259d2780: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8880259d2800: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8880259d2880: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8880259d2900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ================================================================== Fix this by flushing the delalloc workers queue before stopping the cleaner kthread. Reported-by: syzbot+b7cf50a0c173770dcb14@syzkaller.appspotmail.com Link: https://lore.kernel.org/linux-btrfs/674ed7e8.050a0220.48a03.0031.GAE@google.com/ Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-01-09btrfs: fix use-after-free when COWing tree bock and tracing is enabledFilipe Manana1-7/+4
[ Upstream commit 44f52bbe96dfdbe4aca3818a2534520082a07040 ] When a COWing a tree block, at btrfs_cow_block(), and we have the tracepoint trace_btrfs_cow_block() enabled and preemption is also enabled (CONFIG_PREEMPT=y), we can trigger a use-after-free in the COWed extent buffer while inside the tracepoint code. This is because in some paths that call btrfs_cow_block(), such as btrfs_search_slot(), we are holding the last reference on the extent buffer @buf so btrfs_force_cow_block() drops the last reference on the @buf extent buffer when it calls free_extent_buffer_stale(buf), which schedules the release of the extent buffer with RCU. This means that if we are on a kernel with preemption, the current task may be preempted before calling trace_btrfs_cow_block() and the extent buffer already released by the time trace_btrfs_cow_block() is called, resulting in a use-after-free. Fix this by moving the trace_btrfs_cow_block() from btrfs_cow_block() to btrfs_force_cow_block() before the COWed extent buffer is freed. This also has a side effect of invoking the tracepoint in the tree defrag code, at defrag.c:btrfs_realloc_node(), since btrfs_force_cow_block() is called there, but this is fine and it was actually missing there. Reported-by: syzbot+8517da8635307182c8a5@syzkaller.appspotmail.com Link: https://lore.kernel.org/linux-btrfs/6759a9b9.050a0220.1ac542.000d.GAE@google.com/ CC: stable@vger.kernel.org # 5.4+ Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-01-09btrfs: rename and export __btrfs_cow_block()Filipe Manana2-15/+22
[ Upstream commit 95f93bc4cbcac6121a5ee85cd5019ee8e7447e0b ] Rename and export __btrfs_cow_block() as btrfs_force_cow_block(). This is to allow to move defrag specific code out of ctree.c and into defrag.c in one of the next patches. Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Stable-dep-of: 44f52bbe96df ("btrfs: fix use-after-free when COWing tree bock and tracing is enabled") Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-01-09btrfs: fix use-after-free in btrfs_encoded_read_endio()Johannes Thumshirn1-1/+1
commit 05b36b04d74a517d6675bf2f90829ff1ac7e28dc upstream. Shinichiro reported the following use-after free that sometimes is happening in our CI system when running fstests' btrfs/284 on a TCMU runner device: BUG: KASAN: slab-use-after-free in lock_release+0x708/0x780 Read of size 8 at addr ffff888106a83f18 by task kworker/u80:6/219 CPU: 8 UID: 0 PID: 219 Comm: kworker/u80:6 Not tainted 6.12.0-rc6-kts+ #15 Hardware name: Supermicro Super Server/X11SPi-TF, BIOS 3.3 02/21/2020 Workqueue: btrfs-endio btrfs_end_bio_work [btrfs] Call Trace: <TASK> dump_stack_lvl+0x6e/0xa0 ? lock_release+0x708/0x780 print_report+0x174/0x505 ? lock_release+0x708/0x780 ? __virt_addr_valid+0x224/0x410 ? lock_release+0x708/0x780 kasan_report+0xda/0x1b0 ? lock_release+0x708/0x780 ? __wake_up+0x44/0x60 lock_release+0x708/0x780 ? __pfx_lock_release+0x10/0x10 ? __pfx_do_raw_spin_lock+0x10/0x10 ? lock_is_held_type+0x9a/0x110 _raw_spin_unlock_irqrestore+0x1f/0x60 __wake_up+0x44/0x60 btrfs_encoded_read_endio+0x14b/0x190 [btrfs] btrfs_check_read_bio+0x8d9/0x1360 [btrfs] ? lock_release+0x1b0/0x780 ? trace_lock_acquire+0x12f/0x1a0 ? __pfx_btrfs_check_read_bio+0x10/0x10 [btrfs] ? process_one_work+0x7e3/0x1460 ? lock_acquire+0x31/0xc0 ? process_one_work+0x7e3/0x1460 process_one_work+0x85c/0x1460 ? __pfx_process_one_work+0x10/0x10 ? assign_work+0x16c/0x240 worker_thread+0x5e6/0xfc0 ? __pfx_worker_thread+0x10/0x10 kthread+0x2c3/0x3a0 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x31/0x70 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> Allocated by task 3661: kasan_save_stack+0x30/0x50 kasan_save_track+0x14/0x30 __kasan_kmalloc+0xaa/0xb0 btrfs_encoded_read_regular_fill_pages+0x16c/0x6d0 [btrfs] send_extent_data+0xf0f/0x24a0 [btrfs] process_extent+0x48a/0x1830 [btrfs] changed_cb+0x178b/0x2ea0 [btrfs] btrfs_ioctl_send+0x3bf9/0x5c20 [btrfs] _btrfs_ioctl_send+0x117/0x330 [btrfs] btrfs_ioctl+0x184a/0x60a0 [btrfs] __x64_sys_ioctl+0x12e/0x1a0 do_syscall_64+0x95/0x180 entry_SYSCALL_64_after_hwframe+0x76/0x7e Freed by task 3661: kasan_save_stack+0x30/0x50 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3b/0x70 __kasan_slab_free+0x4f/0x70 kfree+0x143/0x490 btrfs_encoded_read_regular_fill_pages+0x531/0x6d0 [btrfs] send_extent_data+0xf0f/0x24a0 [btrfs] process_extent+0x48a/0x1830 [btrfs] changed_cb+0x178b/0x2ea0 [btrfs] btrfs_ioctl_send+0x3bf9/0x5c20 [btrfs] _btrfs_ioctl_send+0x117/0x330 [btrfs] btrfs_ioctl+0x184a/0x60a0 [btrfs] __x64_sys_ioctl+0x12e/0x1a0 do_syscall_64+0x95/0x180 entry_SYSCALL_64_after_hwframe+0x76/0x7e The buggy address belongs to the object at ffff888106a83f00 which belongs to the cache kmalloc-rnd-07-96 of size 96 The buggy address is located 24 bytes inside of freed 96-byte region [ffff888106a83f00, ffff888106a83f60) The buggy address belongs to the physical page: page: refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff888106a83800 pfn:0x106a83 flags: 0x17ffffc0000000(node=0|zone=2|lastcpupid=0x1fffff) page_type: f5(slab) raw: 0017ffffc0000000 ffff888100053680 ffffea0004917200 0000000000000004 raw: ffff888106a83800 0000000080200019 00000001f5000000 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888106a83e00: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc ffff888106a83e80: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc >ffff888106a83f00: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc ^ ffff888106a83f80: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc ffff888106a84000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ================================================================== Further analyzing the trace and the crash dump's vmcore file shows that the wake_up() call in btrfs_encoded_read_endio() is calling wake_up() on the wait_queue that is in the private data passed to the end_io handler. Commit 4ff47df40447 ("btrfs: move priv off stack in btrfs_encoded_read_regular_fill_pages()") moved 'struct btrfs_encoded_read_private' off the stack. Before that commit one can see a corruption of the private data when analyzing the vmcore after a crash: *(struct btrfs_encoded_read_private *)0xffff88815626eec8 = { .wait = (wait_queue_head_t){ .lock = (spinlock_t){ .rlock = (struct raw_spinlock){ .raw_lock = (arch_spinlock_t){ .val = (atomic_t){ .counter = (int)-2005885696, }, .locked = (u8)0, .pending = (u8)157, .locked_pending = (u16)40192, .tail = (u16)34928, }, .magic = (unsigned int)536325682, .owner_cpu = (unsigned int)29, .owner = (void *)__SCT__tp_func_btrfs_transaction_commit+0x0 = 0x0, .dep_map = (struct lockdep_map){ .key = (struct lock_class_key *)0xffff8881575a3b6c, .class_cache = (struct lock_class *[2]){ 0xffff8882a71985c0, 0xffffea00066f5d40 }, .name = (const char *)0xffff88815626f100 = "", .wait_type_outer = (u8)37, .wait_type_inner = (u8)178, .lock_type = (u8)154, }, }, .__padding = (u8 [24]){ 0, 157, 112, 136, 50, 174, 247, 31, 29 }, .dep_map = (struct lockdep_map){ .key = (struct lock_class_key *)0xffff8881575a3b6c, .class_cache = (struct lock_class *[2]){ 0xffff8882a71985c0, 0xffffea00066f5d40 }, .name = (const char *)0xffff88815626f100 = "", .wait_type_outer = (u8)37, .wait_type_inner = (u8)178, .lock_type = (u8)154, }, }, .head = (struct list_head){ .next = (struct list_head *)0x112cca, .prev = (struct list_head *)0x47, }, }, .pending = (atomic_t){ .counter = (int)-1491499288, }, .status = (blk_status_t)130, } Here we can see several indicators of in-memory data corruption, e.g. the large negative atomic values of ->pending or ->wait->lock->rlock->raw_lock->val, as well as the bogus spinlock magic 0x1ff7ae32 (decimal 536325682 above) instead of 0xdead4ead or the bogus pointer values for ->wait->head. To fix this, change atomic_dec_return() to atomic_dec_and_test() to fix the corruption, as atomic_dec_return() is defined as two instructions on x86_64, whereas atomic_dec_and_test() is defined as a single atomic operation. This can lead to a situation where counter value is already decremented but the if statement in btrfs_encoded_read_endio() is not completely processed, i.e. the 0 test has not completed. If another thread continues executing btrfs_encoded_read_regular_fill_pages() the atomic_dec_return() there can see an already updated ->pending counter and continues by freeing the private data. Continuing in the endio handler the test for 0 succeeds and the wait_queue is woken up, resulting in a use-after-free. Reported-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com> Suggested-by: Damien Le Moal <Damien.LeMoal@wdc.com> Fixes: 1881fba89bd5 ("btrfs: add BTRFS_IOC_ENCODED_READ ioctl") CC: stable@vger.kernel.org # 6.1+ Reviewed-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Alva Lan <alvalan9@foxmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-01-02btrfs: sysfs: fix direct super block member readsQu Wenruo1-3/+3
commit fca432e73db2bec0fdbfbf6d98d3ebcd5388a977 upstream. The following sysfs entries are reading super block member directly, which can have a different endian and cause wrong values: - sys/fs/btrfs/<uuid>/nodesize - sys/fs/btrfs/<uuid>/sectorsize - sys/fs/btrfs/<uuid>/clone_alignment Thankfully those values (nodesize and sectorsize) are always aligned inside the btrfs_super_block, so it won't trigger unaligned read errors, just endian problems. Fix them by using the native cached members instead. Fixes: df93589a1737 ("btrfs: export more from FS_INFO to sysfs") CC: stable@vger.kernel.org Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-01-02btrfs: avoid monopolizing a core when activating a swap fileFilipe Manana1-0/+2
commit 2c8507c63f5498d4ee4af404a8e44ceae4345056 upstream. During swap activation we iterate over the extents of a file and we can have many thousands of them, so we can end up in a busy loop monopolizing a core. Avoid this by doing a voluntary reschedule after processing each extent. CC: stable@vger.kernel.org # 5.4+ Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-12-27btrfs: tree-checker: reject inline extent items with 0 ref countQu Wenruo1-1/+26
commit dfb92681a19e1d5172420baa242806414b3eff6f upstream. [BUG] There is a bug report in the mailing list where btrfs_run_delayed_refs() failed to drop the ref count for logical 25870311358464 num_bytes 2113536. The involved leaf dump looks like this: item 166 key (25870311358464 168 2113536) itemoff 10091 itemsize 50 extent refs 1 gen 84178 flags 1 ref#0: shared data backref parent 32399126528000 count 0 <<< ref#1: shared data backref parent 31808973717504 count 1 Notice the count number is 0. [CAUSE] There is no concrete evidence yet, but considering 0 -> 1 is also a single bit flipped, it's possible that hardware memory bitflip is involved, causing the on-disk extent tree to be corrupted. [FIX] To prevent us reading such corrupted extent item, or writing such damaged extent item back to disk, enhance the handling of BTRFS_EXTENT_DATA_REF_KEY and BTRFS_SHARED_DATA_REF_KEY keys for both inlined and key items, to detect such 0 ref count and reject them. CC: stable@vger.kernel.org # 5.4+ Link: https://lore.kernel.org/linux-btrfs/7c69dd49-c346-4806-86e7-e6f863a66f48@app.fastmail.com/ Reported-by: Frankie Fisher <frankie@terrorise.me.uk> Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-12-14btrfs: fix missing snapshot drew unlock when root is dead during swap activationFilipe Manana1-0/+1
[ Upstream commit 9c803c474c6c002d8ade68ebe99026cc39c37f85 ] When activating a swap file we acquire the root's snapshot drew lock and then check if the root is dead, failing and returning with -EPERM if it's dead but without unlocking the root's snapshot lock. Fix this by adding the missing unlock. Fixes: 60021bd754c6 ("btrfs: prevent subvol with swapfile from being deleted") Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: David Sterba <dsterba@suse.com> Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-14btrfs: do not clear read-only when adding sprout deviceBoris Burkov1-4/+0
[ Upstream commit 70958a949d852cbecc3d46127bf0b24786df0130 ] If you follow the seed/sprout wiki, it suggests the following workflow: btrfstune -S 1 seed_dev mount seed_dev mnt btrfs device add sprout_dev mount -o remount,rw mnt The first mount mounts the FS readonly, which results in not setting BTRFS_FS_OPEN, and setting the readonly bit on the sb. The device add somewhat surprisingly clears the readonly bit on the sb (though the mount is still practically readonly, from the users perspective...). Finally, the remount checks the readonly bit on the sb against the flag and sees no change, so it does not run the code intended to run on ro->rw transitions, leaving BTRFS_FS_OPEN unset. As a result, when the cleaner_kthread runs, it sees no BTRFS_FS_OPEN and does no work. This results in leaking deleted snapshots until we run out of space. I propose fixing it at the first departure from what feels reasonable: when we clear the readonly bit on the sb during device add. A new fstest I have written reproduces the bug and confirms the fix. Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Boris Burkov <boris@bur.io> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-14btrfs: avoid unnecessary device path update for the same deviceQu Wenruo1-1/+37
[ Upstream commit 2e8b6bc0ab41ce41e6dfcc204b6cc01d5abbc952 ] [PROBLEM] It is very common for udev to trigger device scan, and every time a mounted btrfs device got re-scan from different soft links, we will get some of unnecessary device path updates, this is especially common for LVM based storage: # lvs scratch1 test -wi-ao---- 10.00g scratch2 test -wi-a----- 10.00g scratch3 test -wi-a----- 10.00g scratch4 test -wi-a----- 10.00g scratch5 test -wi-a----- 10.00g test test -wi-a----- 10.00g # mkfs.btrfs -f /dev/test/scratch1 # mount /dev/test/scratch1 /mnt/btrfs # dmesg -c [ 205.705234] BTRFS: device fsid 7be2602f-9e35-4ecf-a6ff-9e91d2c182c9 devid 1 transid 6 /dev/mapper/test-scratch1 (253:4) scanned by mount (1154) [ 205.710864] BTRFS info (device dm-4): first mount of filesystem 7be2602f-9e35-4ecf-a6ff-9e91d2c182c9 [ 205.711923] BTRFS info (device dm-4): using crc32c (crc32c-intel) checksum algorithm [ 205.713856] BTRFS info (device dm-4): using free-space-tree [ 205.722324] BTRFS info (device dm-4): checking UUID tree So far so good, but even if we just touched any soft link of "dm-4", we will get quite some unnecessary device path updates. # touch /dev/mapper/test-scratch1 # dmesg -c [ 469.295796] BTRFS info: devid 1 device path /dev/mapper/test-scratch1 changed to /dev/dm-4 scanned by (udev-worker) (1221) [ 469.300494] BTRFS info: devid 1 device path /dev/dm-4 changed to /dev/mapper/test-scratch1 scanned by (udev-worker) (1221) Such device path rename is unnecessary and can lead to random path change due to the udev race. [CAUSE] Inside device_list_add(), we are using a very primitive way checking if the device has changed, strcmp(). Which can never handle links well, no matter if it's hard or soft links. So every different link of the same device will be treated as a different device, causing the unnecessary device path update. [FIX] Introduce a helper, is_same_device(), and use path_equal() to properly detect the same block device. So that the different soft links won't trigger the rename race. Reviewed-by: Filipe Manana <fdmanana@suse.com> Link: https://bugzilla.suse.com/show_bug.cgi?id=1230641 Reported-by: Fabian Vogt <fvogt@suse.com> Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-14btrfs: don't BUG_ON on ENOMEM from btrfs_lookup_extent_info() in ↵Josef Bacik1-1/+0
walk_down_proc() commit a580fb2c3479d993556e1c31b237c9e5be4944a3 upstream. We handle errors here properly, ENOMEM isn't fatal, return the error. Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Keerthana K <keerthana.kalyanasundaram@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-12-14btrfs: ref-verify: fix use-after-free after invalid ref actionFilipe Manana1-0/+1
[ Upstream commit 7c4e39f9d2af4abaf82ca0e315d1fd340456620f ] At btrfs_ref_tree_mod() after we successfully inserted the new ref entry (local variable 'ref') into the respective block entry's rbtree (local variable 'be'), if we find an unexpected action of BTRFS_DROP_DELAYED_REF, we error out and free the ref entry without removing it from the block entry's rbtree. Then in the error path of btrfs_ref_tree_mod() we call btrfs_free_ref_cache(), which iterates over all block entries and then calls free_block_entry() for each one, and there we will trigger a use-after-free when we are called against the block entry to which we added the freed ref entry to its rbtree, since the rbtree still points to the block entry, as we didn't remove it from the rbtree before freeing it in the error path at btrfs_ref_tree_mod(). Fix this by removing the new ref entry from the rbtree before freeing it. Syzbot report this with the following stack traces: BTRFS error (device loop0 state EA): Ref action 2, root 5, ref_root 0, parent 8564736, owner 0, offset 0, num_refs 18446744073709551615 __btrfs_mod_ref+0x7dd/0xac0 fs/btrfs/extent-tree.c:2523 update_ref_for_cow+0x9cd/0x11f0 fs/btrfs/ctree.c:512 btrfs_force_cow_block+0x9f6/0x1da0 fs/btrfs/ctree.c:594 btrfs_cow_block+0x35e/0xa40 fs/btrfs/ctree.c:754 btrfs_search_slot+0xbdd/0x30d0 fs/btrfs/ctree.c:2116 btrfs_insert_empty_items+0x9c/0x1a0 fs/btrfs/ctree.c:4314 btrfs_insert_empty_item fs/btrfs/ctree.h:669 [inline] btrfs_insert_orphan_item+0x1f1/0x320 fs/btrfs/orphan.c:23 btrfs_orphan_add+0x6d/0x1a0 fs/btrfs/inode.c:3482 btrfs_unlink+0x267/0x350 fs/btrfs/inode.c:4293 vfs_unlink+0x365/0x650 fs/namei.c:4469 do_unlinkat+0x4ae/0x830 fs/namei.c:4533 __do_sys_unlinkat fs/namei.c:4576 [inline] __se_sys_unlinkat fs/namei.c:4569 [inline] __x64_sys_unlinkat+0xcc/0xf0 fs/namei.c:4569 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f BTRFS error (device loop0 state EA): Ref action 1, root 5, ref_root 5, parent 0, owner 260, offset 0, num_refs 1 __btrfs_mod_ref+0x76b/0xac0 fs/btrfs/extent-tree.c:2521 update_ref_for_cow+0x96a/0x11f0 btrfs_force_cow_block+0x9f6/0x1da0 fs/btrfs/ctree.c:594 btrfs_cow_block+0x35e/0xa40 fs/btrfs/ctree.c:754 btrfs_search_slot+0xbdd/0x30d0 fs/btrfs/ctree.c:2116 btrfs_lookup_inode+0xdc/0x480 fs/btrfs/inode-item.c:411 __btrfs_update_delayed_inode+0x1e7/0xb90 fs/btrfs/delayed-inode.c:1030 btrfs_update_delayed_inode fs/btrfs/delayed-inode.c:1114 [inline] __btrfs_commit_inode_delayed_items+0x2318/0x24a0 fs/btrfs/delayed-inode.c:1137 __btrfs_run_delayed_items+0x213/0x490 fs/btrfs/delayed-inode.c:1171 btrfs_commit_transaction+0x8a8/0x3740 fs/btrfs/transaction.c:2313 prepare_to_relocate+0x3c4/0x4c0 fs/btrfs/relocation.c:3586 relocate_block_group+0x16c/0xd40 fs/btrfs/relocation.c:3611 btrfs_relocate_block_group+0x77d/0xd90 fs/btrfs/relocation.c:4081 btrfs_relocate_chunk+0x12c/0x3b0 fs/btrfs/volumes.c:3377 __btrfs_balance+0x1b0f/0x26b0 fs/btrfs/volumes.c:4161 btrfs_balance+0xbdc/0x10c0 fs/btrfs/volumes.c:4538 BTRFS error (device loop0 state EA): Ref action 2, root 5, ref_root 0, parent 8564736, owner 0, offset 0, num_refs 18446744073709551615 __btrfs_mod_ref+0x7dd/0xac0 fs/btrfs/extent-tree.c:2523 update_ref_for_cow+0x9cd/0x11f0 fs/btrfs/ctree.c:512 btrfs_force_cow_block+0x9f6/0x1da0 fs/btrfs/ctree.c:594 btrfs_cow_block+0x35e/0xa40 fs/btrfs/ctree.c:754 btrfs_search_slot+0xbdd/0x30d0 fs/btrfs/ctree.c:2116 btrfs_lookup_inode+0xdc/0x480 fs/btrfs/inode-item.c:411 __btrfs_update_delayed_inode+0x1e7/0xb90 fs/btrfs/delayed-inode.c:1030 btrfs_update_delayed_inode fs/btrfs/delayed-inode.c:1114 [inline] __btrfs_commit_inode_delayed_items+0x2318/0x24a0 fs/btrfs/delayed-inode.c:1137 __btrfs_run_delayed_items+0x213/0x490 fs/btrfs/delayed-inode.c:1171 btrfs_commit_transaction+0x8a8/0x3740 fs/btrfs/transaction.c:2313 prepare_to_relocate+0x3c4/0x4c0 fs/btrfs/relocation.c:3586 relocate_block_group+0x16c/0xd40 fs/btrfs/relocation.c:3611 btrfs_relocate_block_group+0x77d/0xd90 fs/btrfs/relocation.c:4081 btrfs_relocate_chunk+0x12c/0x3b0 fs/btrfs/volumes.c:3377 __btrfs_balance+0x1b0f/0x26b0 fs/btrfs/volumes.c:4161 btrfs_balance+0xbdc/0x10c0 fs/btrfs/volumes.c:4538 ================================================================== BUG: KASAN: slab-use-after-free in rb_first+0x69/0x70 lib/rbtree.c:473 Read of size 8 at addr ffff888042d1af38 by task syz.0.0/5329 CPU: 0 UID: 0 PID: 5329 Comm: syz.0.0 Not tainted 6.12.0-rc7-syzkaller #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:377 [inline] print_report+0x169/0x550 mm/kasan/report.c:488 kasan_report+0x143/0x180 mm/kasan/report.c:601 rb_first+0x69/0x70 lib/rbtree.c:473 free_block_entry+0x78/0x230 fs/btrfs/ref-verify.c:248 btrfs_free_ref_cache+0xa3/0x100 fs/btrfs/ref-verify.c:917 btrfs_ref_tree_mod+0x139f/0x15e0 fs/btrfs/ref-verify.c:898 btrfs_free_extent+0x33c/0x380 fs/btrfs/extent-tree.c:3544 __btrfs_mod_ref+0x7dd/0xac0 fs/btrfs/extent-tree.c:2523 update_ref_for_cow+0x9cd/0x11f0 fs/btrfs/ctree.c:512 btrfs_force_cow_block+0x9f6/0x1da0 fs/btrfs/ctree.c:594 btrfs_cow_block+0x35e/0xa40 fs/btrfs/ctree.c:754 btrfs_search_slot+0xbdd/0x30d0 fs/btrfs/ctree.c:2116 btrfs_lookup_inode+0xdc/0x480 fs/btrfs/inode-item.c:411 __btrfs_update_delayed_inode+0x1e7/0xb90 fs/btrfs/delayed-inode.c:1030 btrfs_update_delayed_inode fs/btrfs/delayed-inode.c:1114 [inline] __btrfs_commit_inode_delayed_items+0x2318/0x24a0 fs/btrfs/delayed-inode.c:1137 __btrfs_run_delayed_items+0x213/0x490 fs/btrfs/delayed-inode.c:1171 btrfs_commit_transaction+0x8a8/0x3740 fs/btrfs/transaction.c:2313 prepare_to_relocate+0x3c4/0x4c0 fs/btrfs/relocation.c:3586 relocate_block_group+0x16c/0xd40 fs/btrfs/relocation.c:3611 btrfs_relocate_block_group+0x77d/0xd90 fs/btrfs/relocation.c:4081 btrfs_relocate_chunk+0x12c/0x3b0 fs/btrfs/volumes.c:3377 __btrfs_balance+0x1b0f/0x26b0 fs/btrfs/volumes.c:4161 btrfs_balance+0xbdc/0x10c0 fs/btrfs/volumes.c:4538 btrfs_ioctl_balance+0x493/0x7c0 fs/btrfs/ioctl.c:3673 v