summaryrefslogtreecommitdiff
path: root/fs/ext4
AgeCommit message (Collapse)AuthorFilesLines
2022-04-08ext4: don't BUG if someone dirty pages without asking ext4 firstTheodore Ts'o1-0/+25
[ Upstream commit cc5095747edfb054ca2068d01af20be3fcc3634f ] [un]pin_user_pages_remote is dirtying pages without properly warning the file system in advance. A related race was noted by Jan Kara in 2018[1]; however, more recently instead of it being a very hard-to-hit race, it could be reliably triggered by process_vm_writev(2) which was discovered by Syzbot[2]. This is technically a bug in mm/gup.c, but arguably ext4 is fragile in that if some other kernel subsystem dirty pages without properly notifying the file system using page_mkwrite(), ext4 will BUG, while other file systems will not BUG (although data will still be lost). So instead of crashing with a BUG, issue a warning (since there may be potential data loss) and just mark the page as clean to avoid unprivileged denial of service attacks until the problem can be properly fixed. More discussion and background can be found in the thread starting at [2]. [1] https://lore.kernel.org/linux-mm/20180103100430.GE4911@quack2.suse.cz [2] https://lore.kernel.org/r/Yg0m6IjcNmfaSokM@google.com Reported-by: syzbot+d59332e2db681cf18f0318a06e994ebbb529a8db@syzkaller.appspotmail.com Reported-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Link: https://lore.kernel.org/r/YiDS9wVfq4mM2jGK@mit.edu Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-08ext4: fix ext4_mb_mark_bb() with flex_bg with fast_commitRitesh Harjani1-55/+76
[ Upstream commit bfdc502a4a4c058bf4cbb1df0c297761d528f54d ] In case of flex_bg feature (which is by default enabled), extents for any given inode might span across blocks from two different block group. ext4_mb_mark_bb() only reads the buffer_head of block bitmap once for the starting block group, but it fails to read it again when the extent length boundary overflows to another block group. Then in this below loop it accesses memory beyond the block group bitmap buffer_head and results into a data abort. for (i = 0; i < clen; i++) if (!mb_test_bit(blkoff + i, bitmap_bh->b_data) == !state) already++; This patch adds this functionality for checking block group boundary in ext4_mb_mark_bb() and update the buffer_head(bitmap_bh) for every different block group. w/o this patch, I was easily able to hit a data access abort using Power platform. <...> [ 74.327662] EXT4-fs error (device loop3): ext4_mb_generate_buddy:1141: group 11, block bitmap and bg descriptor inconsistent: 21248 vs 23294 free clusters [ 74.533214] EXT4-fs (loop3): shut down requested (2) [ 74.536705] Aborting journal on device loop3-8. [ 74.702705] BUG: Unable to handle kernel data access on read at 0xc00000005e980000 [ 74.703727] Faulting instruction address: 0xc0000000007bffb8 cpu 0xd: Vector: 300 (Data Access) at [c000000015db7060] pc: c0000000007bffb8: ext4_mb_mark_bb+0x198/0x5a0 lr: c0000000007bfeec: ext4_mb_mark_bb+0xcc/0x5a0 sp: c000000015db7300 msr: 800000000280b033 dar: c00000005e980000 dsisr: 40000000 current = 0xc000000027af6880 paca = 0xc00000003ffd5200 irqmask: 0x03 irq_happened: 0x01 pid = 5167, comm = mount <...> enter ? for help [c000000015db7380] c000000000782708 ext4_ext_clear_bb+0x378/0x410 [c000000015db7400] c000000000813f14 ext4_fc_replay+0x1794/0x2000 [c000000015db7580] c000000000833f7c do_one_pass+0xe9c/0x12a0 [c000000015db7710] c000000000834504 jbd2_journal_recover+0x184/0x2d0 [c000000015db77c0] c000000000841398 jbd2_journal_load+0x188/0x4a0 [c000000015db7880] c000000000804de8 ext4_fill_super+0x2638/0x3e10 [c000000015db7a40] c0000000005f8404 get_tree_bdev+0x2b4/0x350 [c000000015db7ae0] c0000000007ef058 ext4_get_tree+0x28/0x40 [c000000015db7b00] c0000000005f6344 vfs_get_tree+0x44/0x100 [c000000015db7b70] c00000000063c408 path_mount+0xdd8/0xe70 [c000000015db7c40] c00000000063c8f0 sys_mount+0x450/0x550 [c000000015db7d50] c000000000035770 system_call_exception+0x4a0/0x4e0 [c000000015db7e10] c00000000000c74c system_call_common+0xec/0x250 Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/2609bc8f66fc15870616ee416a18a3d392a209c4.1644992609.git.riteshh@linux.ibm.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-08ext4: correct cluster len and clusters changed accounting in ext4_mb_mark_bbRitesh Harjani1-7/+12
[ Upstream commit a5c0e2fdf7cea535ba03259894dc184e5a4c2800 ] ext4_mb_mark_bb() currently wrongly calculates cluster len (clen) and flex_group->free_clusters. This patch fixes that. Identified based on code review of ext4_mb_mark_bb() function. Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/a0b035d536bafa88110b74456853774b64c8ac40.1644992609.git.riteshh@linux.ibm.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-08ext4: fix fs corruption when tring to remove a non-empty directory with IO errorYe Bin2-10/+9
commit 7aab5c84a0f6ec2290e2ba4a6b245178b1bf949a upstream. We inject IO error when rmdir non empty direcory, then got issue as follows: step1: mkfs.ext4 -F /dev/sda step2: mount /dev/sda test step3: cd test step4: mkdir -p 1/2 step5: rmdir 1 [ 110.920551] ext4_empty_dir: inject fault [ 110.921926] EXT4-fs warning (device sda): ext4_rmdir:3113: inode #12: comm rmdir: empty directory '1' has too many links (3) step6: cd .. step7: umount test step8: fsck.ext4 -f /dev/sda e2fsck 1.42.9 (28-Dec-2013) Pass 1: Checking inodes, blocks, and sizes Pass 2: Checking directory structure Entry '..' in .../??? (13) has deleted/unused inode 12. Clear<y>? yes Pass 3: Checking directory connectivity Unconnected directory inode 13 (...) Connect to /lost+found<y>? yes Pass 4: Checking reference counts Inode 13 ref count is 3, should be 2. Fix<y>? yes Pass 5: Checking group summary information /dev/sda: ***** FILE SYSTEM WAS MODIFIED ***** /dev/sda: 12/131072 files (0.0% non-contiguous), 26157/524288 blocks ext4_rmdir if (!ext4_empty_dir(inode)) goto end_rmdir; ext4_empty_dir bh = ext4_read_dirblock(inode, 0, DIRENT_HTREE); if (IS_ERR(bh)) return true; Now if read directory block failed, 'ext4_empty_dir' will return true, assume directory is empty. Obviously, it will lead to above issue. To solve this issue, if read directory block failed 'ext4_empty_dir' just return false. To avoid making things worse when file system is already corrupted, 'ext4_empty_dir' also return false. Signed-off-by: Ye Bin <yebin10@huawei.com> Cc: stable@kernel.org Link: https://lore.kernel.org/r/20220228024815.3952506-1-yebin10@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-03-16ext4: add check to prevent attempting to resize an fs with sparse_super2Josh Triplett1-0/+5
commit b1489186cc8391e0c1e342f9fbc3eedf6b944c61 upstream. The in-kernel ext4 resize code doesn't support filesystem with the sparse_super2 feature. It fails with errors like this and doesn't finish the resize: EXT4-fs (loop0): resizing filesystem from 16640 to 7864320 blocks EXT4-fs warning (device loop0): verify_reserved_gdb:760: reserved GDT 2 missing grp 1 (32770) EXT4-fs warning (device loop0): ext4_resize_fs:2111: error (-22) occurred during file system resize EXT4-fs (loop0): resized filesystem to 2097152 To reproduce: mkfs.ext4 -b 4096 -I 256 -J size=32 -E resize=$((256*1024*1024)) -O sparse_super2 ext4.img 65M truncate -s 30G ext4.img mount ext4.img /mnt python3 -c 'import fcntl, os, struct ; fd = os.open("/mnt", os.O_RDONLY | os.O_DIRECTORY) ; fcntl.ioctl(fd, 0x40086610, struct.pack("Q", 30 * 1024 * 1024 * 1024 // 4096), False) ; os.close(fd)' dmesg | tail e2fsck ext4.img The userspace resize2fs tool has a check for this case: it checks if the filesystem has sparse_super2 set and if the kernel provides /sys/fs/ext4/features/sparse_super2. However, the former check requires manually reading and parsing the filesystem superblock. Detect this case in ext4_resize_begin and error out early with a clear error message. Signed-off-by: Josh Triplett <josh@joshtriplett.org> Link: https://lore.kernel.org/r/74b8ae78405270211943cd7393e65586c5faeed1.1623093259.git.josh@joshtriplett.org Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08ext4: fix incorrect type issue during replay_del_rangeXin Yin1-2/+3
commit 8fca8a2b0a822f7936130af7299d2fd7f0a66714 upstream. should not use fast commit log data directly, add le32_to_cpu(). Reported-by: kernel test robot <lkp@intel.com> Fixes: 0b5b5a62b945 ("ext4: use ext4_ext_remove_space() for fast commit replay delete range") Cc: stable@kernel.org Signed-off-by: Xin Yin <yinxin.x@bytedance.com> Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com> Link: https://lore.kernel.org/r/20220126063146.2302-1-yinxin.x@bytedance.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08ext4: fix error handling in ext4_fc_record_modified_inode()Ritesh Harjani1-35/+29
commit cdce59a1549190b66f8e3fe465c2b2f714b98a94 upstream. Current code does not fully takes care of krealloc() error case, which could lead to silent memory corruption or a kernel bug. This patch fixes that. Also it cleans up some duplicated error handling logic from various functions in fast_commit.c file. Reported-by: luo penghao <luo.penghao@zte.com.cn> Suggested-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/62e8b6a1cce9359682051deb736a3c0953c9d1e9.1642416995.git.riteshh@linux.ibm.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08ext4: fix error handling in ext4_restore_inline_data()Ritesh Harjani1-1/+9
commit 897026aaa73eb2517dfea8d147f20ddb0b813044 upstream. While running "./check -I 200 generic/475" it sometimes gives below kernel BUG(). Ideally we should not call ext4_write_inline_data() if ext4_create_inline_data() has failed. <log snip> [73131.453234] kernel BUG at fs/ext4/inline.c:223! <code snip> 212 static void ext4_write_inline_data(struct inode *inode, struct ext4_iloc *iloc, 213 void *buffer, loff_t pos, unsigned int len) 214 { <...> 223 BUG_ON(!EXT4_I(inode)->i_inline_off); 224 BUG_ON(pos + len > EXT4_I(inode)->i_inline_size); This patch handles the error and prints out a emergency msg saying potential data loss for the given inode (since we couldn't restore the original inline_data due to some previous error). [ 9571.070313] EXT4-fs (dm-0): error restoring inline_data for inode -- potential data loss! (inode 1703982, error -30) Reported-by: Eric Whitney <enwlinux@gmail.com> Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/9f4cd7dfd54fa58ff27270881823d94ddf78dd07.1642416995.git.riteshh@linux.ibm.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08ext4: modify the logic of ext4_mb_new_blocks_simpleXin Yin1-9/+17
commit 31a074a0c62dc0d2bfb9b543142db4fe27f9e5eb upstream. For now in ext4_mb_new_blocks_simple, if we found a block which should be excluded then will switch to next group, this may probably cause 'group' run out of range. Change to check next block in the same group when get a block should be excluded. Also change the search range to EXT4_CLUSTERS_PER_GROUP and add error checking. Signed-off-by: Xin Yin <yinxin.x@bytedance.com> Reviewed-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com> Link: https://lore.kernel.org/r/20220110035141.1980-3-yinxin.x@bytedance.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08ext4: prevent used blocks from being allocated during fast commit replayXin Yin3-5/+22
commit 599ea31d13617c5484c40cdf50d88301dc351cfc upstream. During fast commit replay procedure, we clear inode blocks bitmap in ext4_ext_clear_bb(), this may cause ext4_mb_new_blocks_simple() allocate blocks still in use. Make ext4_fc_record_regions() also record physical disk regions used by inodes during replay procedure. Then ext4_mb_new_blocks_simple() can excludes these blocks in use. Signed-off-by: Xin Yin <yinxin.x@bytedance.com> Link: https://lore.kernel.org/r/20220110035141.1980-2-yinxin.x@bytedance.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-27ext4: don't use the orphan list when migrating an inodeTheodore Ts'o1-15/+4
commit 6eeaf88fd586f05aaf1d48cb3a139d2a5c6eb055 upstream. We probably want to remove the indirect block to extents migration feature after a deprecation window, but until then, let's fix a potential data loss problem caused by the fact that we put the tmp_inode on the orphan list. In the unlikely case where we crash and do a journal recovery, the data blocks belonging to the inode being migrated are also represented in the tmp_inode on the orphan list --- and so its data blocks will get marked unallocated, and available for reuse. Instead, stop putting the tmp_inode on the oprhan list. So in the case where we crash while migrating the inode, we'll leak an inode, which is not a disaster. It will be easily fixed the next time we run fsck, and it's better than potentially having blocks getting claimed by two different files, and losing data as a result. Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Lukas Czerner <lczerner@redhat.com> Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-27ext4: fix null-ptr-deref in '__ext4_journal_ensure_credits'Ye Bin1-0/+2
commit 298b5c521746d69c07beb2757292fb5ccc1b0f85 upstream. We got issue as follows when run syzkaller test: [ 1901.130043] EXT4-fs error (device vda): ext4_remount:5624: comm syz-executor.5: Abort forced by user [ 1901.130901] Aborting journal on device vda-8. [ 1901.131437] EXT4-fs error (device vda): ext4_journal_check_start:61: comm syz-executor.16: Detected aborted journal [ 1901.131566] EXT4-fs error (device vda): ext4_journal_check_start:61: comm syz-executor.11: Detected aborted journal [ 1901.132586] EXT4-fs error (device vda): ext4_journal_check_start:61: comm syz-executor.18: Detected aborted journal [ 1901.132751] EXT4-fs error (device vda): ext4_journal_check_start:61: comm syz-executor.9: Detected aborted journal [ 1901.136149] EXT4-fs error (device vda) in ext4_reserve_inode_write:6035: Journal has aborted [ 1901.136837] EXT4-fs error (device vda): ext4_journal_check_start:61: comm syz-fuzzer: Detected aborted journal [ 1901.136915] ================================================================== [ 1901.138175] BUG: KASAN: null-ptr-deref in __ext4_journal_ensure_credits+0x74/0x140 [ext4] [ 1901.138343] EXT4-fs error (device vda): ext4_journal_check_start:61: comm syz-executor.13: Detected aborted journal [ 1901.138398] EXT4-fs error (device vda): ext4_journal_check_start:61: comm syz-executor.1: Detected aborted journal [ 1901.138808] Read of size 8 at addr 0000000000000000 by task syz-executor.17/968 [ 1901.138817] [ 1901.138852] EXT4-fs error (device vda): ext4_journal_check_start:61: comm syz-executor.30: Detected aborted journal [ 1901.144779] CPU: 1 PID: 968 Comm: syz-executor.17 Not tainted 4.19.90-vhulk2111.1.0.h893.eulerosv2r10.aarch64+ #1 [ 1901.146479] Hardware name: linux,dummy-virt (DT) [ 1901.147317] Call trace: [ 1901.147552] dump_backtrace+0x0/0x2d8 [ 1901.147898] show_stack+0x28/0x38 [ 1901.148215] dump_stack+0xec/0x15c [ 1901.148746] kasan_report+0x108/0x338 [ 1901.149207] __asan_load8+0x58/0xb0 [ 1901.149753] __ext4_journal_ensure_credits+0x74/0x140 [ext4] [ 1901.150579] ext4_xattr_delete_inode+0xe4/0x700 [ext4] [ 1901.151316] ext4_evict_inode+0x524/0xba8 [ext4] [ 1901.151985] evict+0x1a4/0x378 [ 1901.152353] iput+0x310/0x428 [ 1901.152733] do_unlinkat+0x260/0x428 [ 1901.153056] __arm64_sys_unlinkat+0x6c/0xc0 [ 1901.153455] el0_svc_common+0xc8/0x320 [ 1901.153799] el0_svc_handler+0xf8/0x160 [ 1901.154265] el0_svc+0x10/0x218 [ 1901.154682] ================================================================== This issue may happens like this: Process1 Process2 ext4_evict_inode ext4_journal_start ext4_truncate ext4_ind_truncate ext4_free_branches ext4_ind_truncate_ensure_credits ext4_journal_ensure_credits_fn ext4_journal_restart handle->h_transaction = NULL; mount -o remount,abort /mnt -> trigger JBD abort start_this_handle -> will return failed ext4_xattr_delete_inode ext4_journal_ensure_credits ext4_journal_ensure_credits_fn __ext4_journal_ensure_credits jbd2_handle_buffer_credits journal = handle->h_transaction->t_journal; ->null-ptr-deref Now, indirect truncate process didn't handle error. To solve this issue maybe simply add check handle is abort in '__ext4_journal_ensure_credits' is enough, and i also think this is necessary. Cc: stable@kernel.org Signed-off-by: Ye Bin <yebin10@huawei.com> Link: https://lore.kernel.org/r/20211224100341.3299128-1-yebin10@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-27ext4: destroy ext4_fc_dentry_cachep kmemcache on module removalSebastian Andrzej Siewior3-0/+8
commit ab047d516dea72f011c15c04a929851e4d053109 upstream. The kmemcache for ext4_fc_dentry_cachep remains registered after module removal. Destroy ext4_fc_dentry_cachep kmemcache on module removal. Fixes: aa75f4d3daaeb ("ext4: main fast-commit commit path") Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by: Lukas Czerner <lczerner@redhat.com> Reviewed-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com> Link: https://lore.kernel.org/r/20211110134640.lyku5vklvdndw6uk@linutronix.de Link: https://lore.kernel.org/r/YbiK3JetFFl08bd7@linutronix.de Link: https://lore.kernel.org/r/20211223164436.2628390-1-bigeasy@linutronix.de Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-27ext4: fast commit may miss tracking unwritten range during ftruncateXin Yin1-2/+1
commit 9725958bb75cdfa10f2ec11526fdb23e7485e8e4 upstream. If use FALLOC_FL_KEEP_SIZE to alloc unwritten range at bottom, the inode->i_size will not include the unwritten range. When call ftruncate with fast commit enabled, it will miss to track the unwritten range. Change to trace the full range during ftruncate. Signed-off-by: Xin Yin <yinxin.x@bytedance.com> Reviewed-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com> Link: https://lore.kernel.org/r/20211223032337.5198-3-yinxin.x@bytedance.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-27ext4: use ext4_ext_remove_space() for fast commit replay delete rangeXin Yin1-5/+8
commit 0b5b5a62b945a141e64011b2f90ee7e46f14be98 upstream. For now ,we use ext4_punch_hole() during fast commit replay delete range procedure. But it will be affected by inode->i_size, which may not correct during fast commit replay procedure. The following test will failed. -create & write foo (len 1000K) -falloc FALLOC_FL_ZERO_RANGE foo (range 400K - 600K) -create & fsync bar -falloc FALLOC_FL_PUNCH_HOLE foo (range 300K-500K) -fsync foo -crash before a full commit After the fast_commit reply procedure, the range 400K-500K will not be removed. Because in this case, when calling ext4_punch_hole() the inode->i_size is 0, and it just retruns with doing nothing. Change to use ext4_ext_remove_space() instead of ext4_punch_hole() to remove blocks of inode directly. Signed-off-by: Xin Yin <yinxin.x@bytedance.com> Reviewed-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com> Link: https://lore.kernel.org/r/20211223032337.5198-2-yinxin.x@bytedance.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-27ext4: Fix BUG_ON in ext4_bread when write quota dataYe Bin1-1/+1
commit 380a0091cab482489e9b19e07f2a166ad2b76d5c upstream. We got issue as follows when run syzkaller: [ 167.936972] EXT4-fs error (device loop0): __ext4_remount:6314: comm rep: Abort forced by user [ 167.938306] EXT4-fs (loop0): Remounting filesystem read-only [ 167.981637] Assertion failure in ext4_getblk() at fs/ext4/inode.c:847: '(EXT4_SB(inode->i_sb)->s_mount_state & EXT4_FC_REPLAY) || handle != NULL || create == 0' [ 167.983601] ------------[ cut here ]------------ [ 167.984245] kernel BUG at fs/ext4/inode.c:847! [ 167.984882] invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI [ 167.985624] CPU: 7 PID: 2290 Comm: rep Tainted: G B 5.16.0-rc5-next-20211217+ #123 [ 167.986823] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20190727_073836-buildvm-ppc64le-16.ppc.fedoraproject.org-3.fc31 04/01/2014 [ 167.988590] RIP: 0010:ext4_getblk+0x17e/0x504 [ 167.989189] Code: c6 01 74 28 49 c7 c0 a0 a3 5c 9b b9 4f 03 00 00 48 c7 c2 80 9c 5c 9b 48 c7 c6 40 b6 5c 9b 48 c7 c7 20 a4 5c 9b e8 77 e3 fd ff <0f> 0b 8b 04 244 [ 167.991679] RSP: 0018:ffff8881736f7398 EFLAGS: 00010282 [ 167.992385] RAX: 0000000000000094 RBX: 1ffff1102e6dee75 RCX: 0000000000000000 [ 167.993337] RDX: 0000000000000001 RSI: ffffffff9b6e29e0 RDI: ffffed102e6dee66 [ 167.994292] RBP: ffff88816a076210 R08: 0000000000000094 R09: ffffed107363fa09 [ 167.995252] R10: ffff88839b1fd047 R11: ffffed107363fa08 R12: ffff88816a0761e8 [ 167.996205] R13: 0000000000000000 R14: 0000000000000021 R15: 0000000000000001 [ 167.997158] FS: 00007f6a1428c740(0000) GS:ffff88839b000000(0000) knlGS:0000000000000000 [ 167.998238] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 167.999025] CR2: 00007f6a140716c8 CR3: 0000000133216000 CR4: 00000000000006e0 [ 167.999987] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 168.000944] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 168.001899] Call Trace: [ 168.002235] <TASK> [ 168.007167] ext4_bread+0xd/0x53 [ 168.007612] ext4_quota_write+0x20c/0x5c0 [ 168.010457] write_blk+0x100/0x220 [ 168.010944] remove_free_dqentry+0x1c6/0x440 [ 168.011525] free_dqentry.isra.0+0x565/0x830 [ 168.012133] remove_tree+0x318/0x6d0 [ 168.014744] remove_tree+0x1eb/0x6d0 [ 168.017346] remove_tree+0x1eb/0x6d0 [ 168.019969] remove_tree+0x1eb/0x6d0 [ 168.022128] qtree_release_dquot+0x291/0x340 [ 168.023297] v2_release_dquot+0xce/0x120 [ 168.023847] dquot_release+0x197/0x3e0 [ 168.024358] ext4_release_dquot+0x22a/0x2d0 [ 168.024932] dqput.part.0+0x1c9/0x900 [ 168.025430] __dquot_drop+0x120/0x190 [ 168.025942] ext4_clear_inode+0x86/0x220 [ 168.026472] ext4_evict_inode+0x9e8/0xa22 [ 168.028200] evict+0x29e/0x4f0 [ 168.028625] dispose_list+0x102/0x1f0 [ 168.029148] evict_inodes+0x2c1/0x3e0 [ 168.030188] generic_shutdown_super+0xa4/0x3b0 [ 168.030817] kill_block_super+0x95/0xd0 [ 168.031360] deactivate_locked_super+0x85/0xd0 [ 168.031977] cleanup_mnt+0x2bc/0x480 [ 168.033062] task_work_run+0xd1/0x170 [ 168.033565] do_exit+0xa4f/0x2b50 [ 168.037155] do_group_exit+0xef/0x2d0 [ 168.037666] __x64_sys_exit_group+0x3a/0x50 [ 168.038237] do_syscall_64+0x3b/0x90 [ 168.038751] entry_SYSCALL_64_after_hwframe+0x44/0xae In order to reproduce this problem, the following conditions need to be met: 1. Ext4 filesystem with no journal; 2. Filesystem image with incorrect quota data; 3. Abort filesystem forced by user; 4. umount filesystem; As in ext4_quota_write: ... if (EXT4_SB(sb)->s_journal && !handle) { ext4_msg(sb, KERN_WARNING, "Quota write (off=%llu, len=%llu)" " cancelled because transaction is not started", (unsigned long long)off, (unsigned long long)len); return -EIO; } ... We only check handle if NULL when filesystem has journal. There is need check handle if NULL even when filesystem has no journal. Signed-off-by: Ye Bin <yebin10@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20211223015506.297766-1-yebin10@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-27ext4: set csum seed in tmp inode while migrating to extentsLuís Henriques1-1/+11
commit e81c9302a6c3c008f5c30beb73b38adb0170ff2d upstream. When migrating to extents, the temporary inode will have it's own checksum seed. This means that, when swapping the inodes data, the inode checksums will be incorrect. This can be fixed by recalculating the extents checksums again. Or simply by copying the seed into the temporary inode. Link: https://bugzilla.kernel.org/show_bug.cgi?id=213357 Reported-by: Jeroen van Wolffelaar <jeroen@wolffelaar.nl> Signed-off-by: Luís Henriques <lhenriques@suse.de> Link: https://lore.kernel.org/r/20211214175058.19511-1-lhenriques@suse.de Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-27ext4: fix fast commit may miss tracking range for FALLOC_FL_ZERO_RANGEXin Yin2-5/+4
commit 5e4d0eba1ccaf19f93222abdeda5a368be141785 upstream. when call falloc with FALLOC_FL_ZERO_RANGE, to set an range to unwritten, which has been already initialized. If the range is align to blocksize, fast commit will not track range for this change. Also track range for unwritten range in ext4_map_blocks(). Signed-off-by: Xin Yin <yinxin.x@bytedance.com> Reviewed-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com> Link: https://lore.kernel.org/r/20211221022839.374606-1-yinxin.x@bytedance.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-27ext4: initialize err_blk before calling __ext4_get_inode_locHarshad Shirwadkar1-2/+2
commit c27c29c6af4f3f4ce925a2111c256733c5a5b430 upstream. It is not guaranteed that __ext4_get_inode_loc will definitely set err_blk pointer when it returns EIO. To avoid using uninitialized variables, let's first set err_blk to 0. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com> Link: https://lore.kernel.org/r/20211201163421.2631661-1-harshads@google.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-27ext4: fix a possible ABBA deadlock due to busy PAChunguang Xu1-22/+18
commit 8c80fb312d7abf8bcd66cca1d843a80318a2c522 upstream. We found on older kernel (3.10) that in the scenario of insufficient disk space, system may trigger an ABBA deadlock problem, it seems that this problem still exists in latest kernel, try to fix it here. The main process triggered by this problem is that task A occupies the PA and waits for the jbd2 transaction finish, the jbd2 transaction waits for the completion of task B's IO (plug_list), but task B waits for the release of PA by task A to finish discard, which indirectly forms an ABBA deadlock. The related calltrace is as follows: Task A vfs_write ext4_mb_new_blocks() ext4_mb_mark_diskspace_used() JBD2 jbd2_journal_get_write_access() -> jbd2_journal_commit_transaction() ->schedule() filemap_fdatawait() | | | Task B | | do_unlinkat() | | ext4_evict_inode() | | jbd2_journal_begin_ordered_truncate() | | filemap_fdatawrite_range() | | ext4_mb_new_blocks() | -ext4_mb_discard_group_preallocations() <----- Here, try to cancel ext4_mb_discard_group_preallocations() internal retry due to PA busy, and do a limited number of retries inside ext4_mb_discard_preallocations(), which can circumvent the above problems, but also has some advantages: 1. Since the PA is in a busy state, if other groups have free PAs, keeping the current PA may help to reduce fragmentation. 2. Continue to traverse forward instead of waiting for the current group PA to be released. In most scenarios, the PA discard time can be reduced. However, in the case of smaller free space, if only a few groups have space, then due to multiple traversals of the group, it may increase CPU overhead. But in contrast, I feel that the overall benefit is better than the cost. Signed-off-by: Chunguang Xu <brookxu@tencent.com> Reported-by: kernel test robot <lkp@intel.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/1637630277-23496-1-git-send-email-brookxu.cn@gmail.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-27ext4: make sure quota gets properly shutdown on errorJan Kara1-4/+6
commit 15fc69bbbbbc8c72e5f6cc4e1be0f51283c5448e upstream. When we hit an error when enabling quotas and setting inode flags, we do not properly shutdown quota subsystem despite returning error from Q_QUOTAON quotactl. This can lead to some odd situations like kernel using quota file while it is still writeable for userspace. Make sure we properly cleanup the quota subsystem in case of error. Signed-off-by: Jan Kara <jack@suse.cz> Cc: stable@kernel.org Link: https://lore.kernel.org/r/20211007155336.12493-2-jack@suse.cz Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-27ext4: make sure to reset inode lockdep class when quota enabling failsJan Kara1-1/+12
commit 4013d47a5307fdb5c13370b5392498b00fedd274 upstream. When we succeed in enabling some quota type but fail to enable another one with quota feature, we correctly disable all enabled quota types. However we forget to reset i_data_sem lockdep class. When the inode gets freed and reused, it will inherit this lockdep class (i_data_sem is initialized only when a slab is created) and thus eventually lockdep barfs about possible deadlocks. Reported-and-tested-by: syzbot+3b6f9218b1301ddda3e2@syzkaller.appspotmail.com Signed-off-by: Jan Kara <jack@suse.cz> Cc: stable@kernel.org Link: https://lore.kernel.org/r/20211007155336.12493-3-jack@suse.cz Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-27ext4: avoid trim error on fs with small groupsJan Kara2-2/+8
[ Upstream commit 173b6e383d2a204c9921ffc1eca3b87aa2106c33 ] A user reported FITRIM ioctl failing for him on ext4 on some devices without apparent reason. After some debugging we've found out that these devices (being LVM volumes) report rather large discard granularity of 42MB and the filesystem had 1k blocksize and thus group size of 8MB. Because ext4 FITRIM implementation puts discard granularity into minlen, ext4_trim_fs() declared the trim request as invalid. However just silently doing nothing seems to be a more appropriate reaction to such combination of parameters since user did not specify anything wrong. CC: Lukas Czerner <lczerner@redhat.com> Fixes: 5c2ed62fd447 ("ext4: Adjust minlen with discard_granularity in the FITRIM ioctl") Signed-off-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20211112152202.26614-1-jack@suse.cz Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-29ext4: check for inconsistent extents between index and leaf blockZhang Yi1-23/+36
commit 9c6e071913792d80894cd0be98cc3c4b770e26d3 upstream. Now that we can check out overlapping extents in leaf block and out-of-order index extents in index block. But the .ee_block in the first extent of one leaf block should equal to the .ei_block in it's parent index extent entry. This patch add a check to verify such inconsistent between the index and leaf block. Signed-off-by: Zhang Yi <yi.zhang@huawei.com> Link: https://lore.kernel.org/r/20210908120850.4012324-3-yi.zhang@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-29ext4: check for out-of-order index extents in ext4_valid_extent_entries()Zhang Yi1-5/+12
commit 8dd27fecede55e8a4e67eef2878040ecad0f0d33 upstream. After commit 5946d089379a ("ext4: check for overlapping extents in ext4_valid_extent_entries()"), we can check out the overlapping extent entry in leaf extent blocks. But the out-of-order extent entry in index extent blocks could also trigger bad things if the filesystem is inconsistent. So this patch add a check to figure out the out-of-order index extents and return error. Signed-off-by: Zhang Yi <yi.zhang@huawei.com> Reviewed-by: Theodore Ts'o <tytso@mit.edu> Link: https://lore.kernel.org/r/20210908120850.4012324-2-yi.zhang@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-29ext4: prevent partial update of the extent blocksZhang Yi1-2/+15
commit 0f2f87d51aebcf71a709b52f661d681594c7dffa upstream. In the most error path of current extents updating operations are not roll back partial updates properly when some bad things happens(.e.g in ext4_ext_insert_extent()). So we may get an inconsistent extents tree if journal has been aborted due to IO error, which may probability lead to BUGON later when we accessing these extent entries in errors=continue mode. This patch drop extent buffer's verify flag before updatng the contents in ext4_ext_get_access(), and reset it after updating in __ext4_ext_dirty(). After this patch we could force to check the extent buffer if extents tree updating was break off, make sure the extents are consistent. Signed-off-by: Zhang Yi <yi.zhang@huawei.com> Reviewed-by: Theodore Ts'o <tytso@mit.edu> Link: https://lore.kernel.org/r/20210908120850.4012324-4-yi.zhang@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-18ext4: refresh the ext4_ext_path struct after dropping i_data_sem.yangerkun1-1/+13
commit 1811bc401aa58c7bdb0df3205aa6613b49d32127 upstream. After we drop i_data sem, we need to reload the ext4_ext_path structure since the extent tree can change once i_data_sem is released. This addresses the BUG: [52117.465187] ------------[ cut here ]------------ [52117.465686] kernel BUG at fs/ext4/extents.c:1756! ... [52117.478306] Call Trace: [52117.478565] ext4_ext_shift_extents+0x3ee/0x710 [52117.479020] ext4_fallocate+0x139c/0x1b40 [52117.479405] ? __do_sys_newfstat+0x6b/0x80 [52117.479805] vfs_fallocate+0x151/0x4b0 [52117.480177] ksys_fallocate+0x4a/0xa0 [52117.480533] __x64_sys_fallocate+0x22/0x30 [52117.480930] do_syscall_64+0x35/0x80 [52117.481277] entry_SYSCALL_64_after_hwframe+0x44/0xae [52117.481769] RIP: 0033:0x7fa062f855ca Cc: stable@kernel.org Link: https://lore.kernel.org/r/20210903062748.4118886-4-yangerkun@huawei.com Signed-off-by: yangerkun <yangerkun@huawei.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-18ext4: ensure enough credits in ext4_ext_shift_path_extentsyangerkun1-34/+15
commit 4268496e48dc681cfa53b92357314b5d7221e625 upstream. Like ext4_ext_rm_leaf, we can ensure that there are enough credits before every call that will consume credits. As part of this fix we fold the functionality of ext4_access_path() into ext4_ext_shift_path_extents(). This change is needed as a preparation for the next bugfix patch. Cc: stable@kernel.org Link: https://lore.kernel.org/r/20210903062748.4118886-3-yangerkun@huawei.com Signed-off-by: yangerkun <yangerkun@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-18ext4: fix lazy initialization next schedule time computation in more ↵Shaoying Xu1-5/+4
granular unit commit 39fec6889d15a658c3a3ebb06fd69d3584ddffd3 upstream. Ext4 file system has default lazy inode table initialization setup once it is mounted. However, it has issue on computing the next schedule time that makes the timeout same amount in jiffies but different real time in secs if with various HZ values. Therefore, fix by measuring the current time in a more granular unit nanoseconds and make the next schedule time independent of the HZ value. Fixes: bfff68738f1c ("ext4: add support for lazy inode table initialization") Signed-off-by: Shaoying Xu <shaoyi@amazon.com> Cc: stable@vger.kernel.org Signed-off-by: Theodore Ts'o <tytso@mit.edu> Link: https://lore.kernel.org/r/20210902164412.9994-2-shaoyi@amazon.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-02ext4: fix possible UAF when remounting r/o a mmp-protected file systemTheodore Ts'o2-17/+20
commit 61bb4a1c417e5b95d9edb4f887f131de32e419cb upstream. After commit 618f003199c6 ("ext4: fix memory leak in ext4_fill_super"), after the file system is remounted read-only, there is a race where the kmmpd thread can exit, causing sbi->s_mmp_tsk to point at freed memory, which the call to ext4_stop_mmpd() can trip over. Fix this by only allowing kmmpd() to exit when it is stopped via ext4_stop_mmpd(). Link: https://lore.kernel.org/r/20210707002433.3719773-1-tytso@mit.edu Reported-by: Ye Bin <yebin10@huawei.com> Bug-Report-Link: <20210629143603.2166962-1-yebin10@huawei.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Tadeusz Struk <tadeusz.struk@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-17ext4: correct the error path of ext4_write_inline_data_end()Zhang Yi2-12/+10
[ Upstream commit 55ce2f649b9e88111270333a8127e23f4f8f42d7 ] Current error path of ext4_write_inline_data_end() is not correct. Firstly, it should pass out the error value if ext4_get_inode_loc() return fail, or else it could trigger infinite loop if we inject error here. And then it's better to add inode to orphan list if it return fail in ext4_journal_stop(), otherwise we could not restore inline xattr entry after power failure. Finally, we need to reset the 'ret' value if ext4_write_inline_data_end() return success in ext4_write_end() and ext4_journalled_write_end(), otherwise we could not get the error return value of ext4_journal_stop(). Signed-off-by: Zhang Yi <yi.zhang@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Link: https://lore.kernel.org/r/20210716122024.1105856-3-yi.zhang@huawei.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-10-17ext4: check and update i_disksize properlyZhang Yi1-16/+18
[ Upstream commit 4df031ff5876d94b48dd9ee486ba5522382a06b2 ] After commit 3da40c7b0898 ("ext4: only call ext4_truncate when size <= isize"), i_disksize could always be updated to i_size in ext4_setattr(), and we could sure that i_disksize <= i_size since holding inode lock and if i_disksize < i_size there are delalloc writes pending in the range upto i_size. If the end of the current write is <= i_size, there's no need to touch i_disksize since writeback will push i_disksize upto i_size eventually. So we can switch to check i_size instead of i_disksize in ext4_da_write_end() when write to the end of the file. we also could remove ext4_mark_inode_dirty() together because we defer inode dirtying to generic_write_end() or ext4_da_write_inline_data_end(). Signed-off-by: Zhang Yi <yi.zhang@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Link: https://lore.kernel.org/r/20210716122024.1105856-2-yi.zhang@huawei.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-10-06ext4: fix potential infinite loop in ext4_dx_readdir()yangerkun1-3/+3
commit 42cb447410d024e9d54139ae9c21ea132a8c384c upstream. When ext4_htree_fill_tree() fails, ext4_dx_readdir() can run into an infinite loop since if info->last_pos != ctx->pos this will reset the directory scan and reread the failing entry. For example: 1. a dx_dir which has 3 block, block 0 as dx_root block, block 1/2 as leaf block which own the ext4_dir_entry_2 2. block 1 read ok and call_filldir which will fill the dirent and update the ctx->pos 3. block 2 read fail, but we has already fill some dirent, so we will return back to userspace will a positive return val(see ksys_getdents64) 4. the second ext4_dx_readdir will reset the world since info->last_pos != ctx->pos, and will also init the curr_hash which pos to block 1 5. So we will read block1 too, and once block2 still read fail, we can only fill one dirent because the hash of the entry in block1(besides the last one) won't greater than curr_hash 6. this time, we forget update last_pos too since the read for block2 will fail, and since we has got the one entry, ksys_getdents64 can return success 7. Latter we will trapped in a loop with step 4~6 Cc: stable@kernel.org Signed-off-by: yangerkun <yangerkun@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Link: https://lore.kernel.org/r/20210914111415.3921954-1-yangerkun@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-06ext4: add error checking to ext4_ext_replay_set_iblocks()Theodore Ts'o1-5/+14
commit 1fd95c05d8f742abfe906620780aee4dbe1a2db0 upstream. If the call to ext4_map_blocks() fails due to an corrupted file system, ext4_ext_replay_set_iblocks() can get stuck in an infinite loop. This could be reproduced by running generic/526 with a file system that has inline_data and fast_commit enabled. The system will repeatedly log to the console: EXT4-fs warning (device dm-3): ext4_block_to_path:105: block 1074800922 > max in inode 131076 and the stack that it gets stuck in is: ext4_block_to_path+0xe3/0x130 ext4_ind_map_blocks+0x93/0x690 ext4_map_blocks+0x100/0x660 skip_hole+0x47/0x70 ext4_ext_replay_set_iblocks+0x223/0x440 ext4_fc_replay_inode+0x29e/0x3b0 ext4_fc_replay+0x278/0x550 do_one_pass+0x646/0xc10 jbd2_journal_recover+0x14a/0x270 jbd2_journal_load+0xc4/0x150 ext4_load_journal+0x1f3/0x490 ext4_fill_super+0x22d4/0x2c00 With this patch, generic/526 still fails, but system is no longer locking up in a tight loop. It's likely the root casue is that fast_commit replay is corrupting file systems with inline_data, and we probably need to add better error handling in the fast commit replay code path beyond what is done here, which essentially just breaks the infinite loop without reporting the to the higher levels of the code. Fixes: 8016E29F4362 ("ext4: fast commit recovery path") Cc: stable@kernel.org Cc: Harshad Shirwadkar <harshadshirwadkar@gmail.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-06ext4: fix reserved space counter leakageJeffle Xu2-0/+11
commit 6fed83957f21eff11c8496e9f24253b03d2bc1dc upstream. When ext4_insert_delayed block receives and recovers from an error from ext4_es_insert_delayed_block(), e.g., ENOMEM, it does not release the space it has reserved for that block insertion as it should. One effect of this bug is that s_dirtyclusters_counter is not decremented and remains incorrectly elevated until the file system has been unmounted. This can result in premature ENOSPC returns and apparent loss of free space. Another effect of this bug is that /sys/fs/ext4/<dev>/delayed_allocation_blocks can remain non-zero even after syncfs has been executed on the filesystem. Besides, add check for s_dirtyclusters_counter when inode is going to be evicted and freed. s_dirtyclusters_counter can still keep non-zero until inode is written back in .evict_inode(), and thus the check is delayed to .destroy_inode(). Fixes: 51865fda28e5 ("ext4: let ext4 maintain extent status tree") Cc: stable@kernel.org Suggested-by: Gao Xiang <hsiangkao@linux.alibaba.com> Signed-off-by: Jeffle Xu <jefflexu@linux.alibaba.com> Reviewed-by: Eric Whitney <enwlinux@gmail.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Link: https://lore.kernel.org/r/20210823061358.84473-1-jefflexu@linux.alibaba.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-06ext4: limit the number of blocks in one ADD_RANGE TLVHou Tao1-0/+6
commit a2c2f0826e2b75560b31daf1cd9a755ab93cf4c6 upstream. Now EXT4_FC_TAG_ADD_RANGE uses ext4_extent to track the newly-added blocks, but the limit on the max value of ee_len field is ignored, and it can lead to BUG_ON as shown below when running command "fallocate -l 128M file" on a fast_commit-enabled fs: kernel BUG at fs/ext4/ext4_extents.h:199! invalid opcode: 0000 [#1] SMP PTI CPU: 3 PID: 624 Comm: fallocate Not tainted 5.14.0-rc6+ #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) RIP: 0010:ext4_fc_write_inode_data+0x1f3/0x200 Call Trace: ? ext4_fc_write_inode+0xf2/0x150 ext4_fc_commit+0x93b/0xa00 ? ext4_fallocate+0x1ad/0x10d0 ext4_sync_file+0x157/0x340 ? ext4_sync_file+0x157/0x340 vfs_fsync_range+0x49/0x80 do_fsync+0x3d/0x70 __x64_sys_fsync+0x14/0x20 do_syscall_64+0x3b/0xc0 entry_SYSCALL_64_after_hwframe+0x44/0xae Simply fixing it by limiting the number of blocks in one EXT4_FC_TAG_ADD_RANGE TLV. Fixes: aa75f4d3daae ("ext4: main fast-commit commit path") Cc: stable@kernel.org Signed-off-by: Hou Tao <houtao1@huawei.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Link: https://lore.kernel.org/r/20210820044505.474318-1-houtao1@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-06ext4: fix loff_t overflow in ext4_max_bitmap_size()Ritesh Harjani1-5/+5
commit 75ca6ad408f459f00b09a64f04c774559848c097 upstream. We should use unsigned long long rather than loff_t to avoid overflow in ext4_max_bitmap_s