summaryrefslogtreecommitdiff
path: root/fs
AgeCommit message (Collapse)AuthorFilesLines
2021-01-19btrfs: fix async discard stallPavel Begunkov1-7/+10
[ Upstream commit ea9ed87c73e87e044b2c58d658eb4ba5216bc488 ] Might happen that bg->discard_eligible_time was changed without rescheduling, so btrfs_discard_workfn() wakes up earlier than that new time, peek_discard_list() returns NULL, and all work halts and goes to sleep without further rescheduling even there are block groups to discard. It happens pretty often, but not so visible from the userspace because after some time it usually will be kicked off anyway by someone else calling btrfs_discard_reschedule_work(). Fix it by continue rescheduling if block group discard lists are not empty. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-01-19io_uring: drop mm and files after task_work_runPavel Begunkov1-0/+2
[ Upstream commit d434ab6db524ab1efd0afad4ffa1ee65ca6ac097 ] __io_req_task_submit() run by task_work can set mm and files, but io_sq_thread() in some cases, and because __io_sq_thread_acquire_mm() and __io_sq_thread_acquire_files() do a simple current->mm/files check it may end up submitting IO with mm/files of another task. We also need to drop it after in the end to drop potentially grabbed references to them. Cc: stable@vger.kernel.org # 5.9+ Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-01-19io_uring: don't take files/mm for a dead taskPavel Begunkov1-0/+2
[ Upstream commit 621fadc22365f3cf307bcd9048e3372e9ee9cdcc ] In rare cases a task may be exiting while io_ring_exit_work() trying to cancel/wait its requests. It's ok for __io_sq_thread_acquire_mm() because of SQPOLL check, but is not for __io_sq_thread_acquire_files(). Play safe and fail for both of them. Cc: stable@vger.kernel.org # 5.5+ Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-01-19ext4: don't leak old mountpoint samplesTheodore Ts'o1-1/+1
[ Upstream commit 5a3b590d4b2db187faa6f06adc9a53d6199fb1f9 ] When the first file is opened, ext4 samples the mountpoint of the filesystem in 64 bytes of the super block. It does so using strlcpy(), this means that the remaining bytes in the super block string buffer are untouched. If the mount point before had a longer path than the current one, it can be reconstructed. Consider the case where the fs was mounted to "/media/johnjdeveloper" and later to "/". The super block buffer then contains "/\x00edia/johnjdeveloper". This case was seen in the wild and caused confusion how the name of a developer ands up on the super block of a filesystem used in production... Fix this by using strncpy() instead of strlcpy(). The superblock field is defined to be a fixed-size char array, and it is already marked using __nonstring in fs/ext4/ext4.h. The consumer of the field in e2fsprogs already assumes that in the case of a 64+ byte mount path, that s_last_mounted will not be NUL terminated. Link: https://lore.kernel.org/r/X9ujIOJG/HqMr88R@mit.edu Reported-by: Richard Weinberger <richard@nod.at> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-01-19btrfs: tree-checker: check if chunk item end overflowsSu Yue1-0/+7
[ Upstream commit 347fb0cfc9bab5195c6701e62eda488310d7938f ] While mounting a crafted image provided by user, kernel panics due to the invalid chunk item whose end is less than start. [66.387422] loop: module loaded [66.389773] loop0: detected capacity change from 262144 to 0 [66.427708] BTRFS: device fsid a62e00e8-e94e-4200-8217-12444de93c2e devid 1 transid 12 /dev/loop0 scanned by mount (613) [66.431061] BTRFS info (device loop0): disk space caching is enabled [66.431078] BTRFS info (device loop0): has skinny extents [66.437101] BTRFS error: insert state: end < start 29360127 37748736 [66.437136] ------------[ cut here ]------------ [66.437140] WARNING: CPU: 16 PID: 613 at fs/btrfs/extent_io.c:557 insert_state.cold+0x1a/0x46 [btrfs] [66.437369] CPU: 16 PID: 613 Comm: mount Tainted: G O 5.11.0-rc1-custom #45 [66.437374] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ArchLinux 1.14.0-1 04/01/2014 [66.437378] RIP: 0010:insert_state.cold+0x1a/0x46 [btrfs] [66.437420] RSP: 0018:ffff93e5414c3908 EFLAGS: 00010286 [66.437427] RAX: 0000000000000000 RBX: 0000000001bfffff RCX: 0000000000000000 [66.437431] RDX: 0000000000000000 RSI: ffffffffb90d4660 RDI: 00000000ffffffff [66.437434] RBP: ffff93e5414c3938 R08: 0000000000000001 R09: 0000000000000001 [66.437438] R10: ffff93e5414c3658 R11: 0000000000000000 R12: ffff8ec782d72aa0 [66.437441] R13: ffff8ec78bc71628 R14: 0000000000000000 R15: 0000000002400000 [66.437447] FS: 00007f01386a8580(0000) GS:ffff8ec809000000(0000) knlGS:0000000000000000 [66.437451] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [66.437455] CR2: 00007f01382fa000 CR3: 0000000109a34000 CR4: 0000000000750ee0 [66.437460] PKRU: 55555554 [66.437464] Call Trace: [66.437475] set_extent_bit+0x652/0x740 [btrfs] [66.437539] set_extent_bits_nowait+0x1d/0x20 [btrfs] [66.437576] add_extent_mapping+0x1e0/0x2f0 [btrfs] [66.437621] read_one_chunk+0x33c/0x420 [btrfs] [66.437674] btrfs_read_chunk_tree+0x6a4/0x870 [btrfs] [66.437708] ? kvm_sched_clock_read+0x18/0x40 [66.437739] open_ctree+0xb32/0x1734 [btrfs] [66.437781] ? bdi_register_va+0x1b/0x20 [66.437788] ? super_setup_bdi_name+0x79/0xd0 [66.437810] btrfs_mount_root.cold+0x12/0xeb [btrfs] [66.437854] ? __kmalloc_track_caller+0x217/0x3b0 [66.437873] legacy_get_tree+0x34/0x60 [66.437880] vfs_get_tree+0x2d/0xc0 [66.437888] vfs_kern_mount.part.0+0x78/0xc0 [66.437897] vfs_kern_mount+0x13/0x20 [66.437902] btrfs_mount+0x11f/0x3c0 [btrfs] [66.437940] ? kfree+0x5ff/0x670 [66.437944] ? __kmalloc_track_caller+0x217/0x3b0 [66.437962] legacy_get_tree+0x34/0x60 [66.437974] vfs_get_tree+0x2d/0xc0 [66.437983] path_mount+0x48c/0xd30 [66.437998] __x64_sys_mount+0x108/0x140 [66.438011] do_syscall_64+0x38/0x50 [66.438018] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [66.438023] RIP: 0033:0x7f0138827f6e [66.438033] RSP: 002b:00007ffecd79edf8 EFLAGS: 00000246 ORIG_RAX: 00000000000000a5 [66.438040] RAX: ffffffffffffffda RBX: 00007f013894c264 RCX: 00007f0138827f6e [66.438044] RDX: 00005593a4a41360 RSI: 00005593a4a33690 RDI: 00005593a4a3a6c0 [66.438047] RBP: 00005593a4a33440 R08: 0000000000000000 R09: 0000000000000001 [66.438050] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 [66.438054] R13: 00005593a4a3a6c0 R14: 00005593a4a41360 R15: 00005593a4a33440 [66.438078] irq event stamp: 18169 [66.438082] hardirqs last enabled at (18175): [<ffffffffb81154bf>] console_unlock+0x4ff/0x5f0 [66.438088] hardirqs last disabled at (18180): [<ffffffffb8115427>] console_unlock+0x467/0x5f0 [66.438092] softirqs last enabled at (16910): [<ffffffffb8a00fe2>] asm_call_irq_on_stack+0x12/0x20 [66.438097] softirqs last disabled at (16905): [<ffffffffb8a00fe2>] asm_call_irq_on_stack+0x12/0x20 [66.438103] ---[ end trace e114b111db64298b ]--- [66.438107] BTRFS error: found node 12582912 29360127 on insert of 37748736 29360127 [66.438127] BTRFS critical: panic in extent_io_tree_panic:679: locking error: extent tree was modified by another thread while locked (errno=-17 Object already exists) [66.441069] ------------[ cut here ]------------ [66.441072] kernel BUG at fs/btrfs/extent_io.c:679! [66.442064] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI [66.443018] CPU: 16 PID: 613 Comm: mount Tainted: G W O 5.11.0-rc1-custom #45 [66.444538] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ArchLinux 1.14.0-1 04/01/2014 [66.446223] RIP: 0010:extent_io_tree_panic.isra.0+0x23/0x25 [btrfs] [66.450878] RSP: 0018:ffff93e5414c3948 EFLAGS: 00010246 [66.451840] RAX: 0000000000000000 RBX: 0000000001bfffff RCX: 0000000000000000 [66.453141] RDX: 0000000000000000 RSI: ffffffffb90d4660 RDI: 00000000ffffffff [66.454445] RBP: ffff93e5414c3948 R08: 0000000000000001 R09: 0000000000000001 [66.455743] R10: ffff93e5414c3658 R11: 0000000000000000 R12: ffff8ec782d728c0 [66.457055] R13: ffff8ec78bc71628 R14: ffff8ec782d72aa0 R15: 0000000002400000 [66.458356] FS: 00007f01386a8580(0000) GS:ffff8ec809000000(0000) knlGS:0000000000000000 [66.459841] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [66.460895] CR2: 00007f01382fa000 CR3: 0000000109a34000 CR4: 0000000000750ee0 [66.462196] PKRU: 55555554 [66.462692] Call Trace: [66.463139] set_extent_bit.cold+0x30/0x98 [btrfs] [66.464049] set_extent_bits_nowait+0x1d/0x20 [btrfs] [66.490466] add_extent_mapping+0x1e0/0x2f0 [btrfs] [66.514097] read_one_chunk+0x33c/0x420 [btrfs] [66.534976] btrfs_read_chunk_tree+0x6a4/0x870 [btrfs] [66.555718] ? kvm_sched_clock_read+0x18/0x40 [66.575758] open_ctree+0xb32/0x1734 [btrfs] [66.595272] ? bdi_register_va+0x1b/0x20 [66.614638] ? super_setup_bdi_name+0x79/0xd0 [66.633809] btrfs_mount_root.cold+0x12/0xeb [btrfs] [66.652938] ? __kmalloc_track_caller+0x217/0x3b0 [66.671925] legacy_get_tree+0x34/0x60 [66.690300] vfs_get_tree+0x2d/0xc0 [66.708221] vfs_kern_mount.part.0+0x78/0xc0 [66.725808] vfs_kern_mount+0x13/0x20 [66.742730] btrfs_mount+0x11f/0x3c0 [btrfs] [66.759350] ? kfree+0x5ff/0x670 [66.775441] ? __kmalloc_track_caller+0x217/0x3b0 [66.791750] legacy_get_tree+0x34/0x60 [66.807494] vfs_get_tree+0x2d/0xc0 [66.823349] path_mount+0x48c/0xd30 [66.838753] __x64_sys_mount+0x108/0x140 [66.854412] do_syscall_64+0x38/0x50 [66.869673] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [66.885093] RIP: 0033:0x7f0138827f6e [66.945613] RSP: 002b:00007ffecd79edf8 EFLAGS: 00000246 ORIG_RAX: 00000000000000a5 [66.977214] RAX: ffffffffffffffda RBX: 00007f013894c264 RCX: 00007f0138827f6e [66.994266] RDX: 00005593a4a41360 RSI: 00005593a4a33690 RDI: 00005593a4a3a6c0 [67.011544] RBP: 00005593a4a33440 R08: 0000000000000000 R09: 0000000000000001 [67.028836] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 [67.045812] R13: 00005593a4a3a6c0 R14: 00005593a4a41360 R15: 00005593a4a33440 [67.216138] ---[ end trace e114b111db64298c ]--- [67.237089] RIP: 0010:extent_io_tree_panic.isra.0+0x23/0x25 [btrfs] [67.325317] RSP: 0018:ffff93e5414c3948 EFLAGS: 00010246 [67.347946] RAX: 0000000000000000 RBX: 0000000001bfffff RCX: 0000000000000000 [67.371343] RDX: 0000000000000000 RSI: ffffffffb90d4660 RDI: 00000000ffffffff [67.394757] RBP: ffff93e5414c3948 R08: 0000000000000001 R09: 0000000000000001 [67.418409] R10: ffff93e5414c3658 R11: 0000000000000000 R12: ffff8ec782d728c0 [67.441906] R13: ffff8ec78bc71628 R14: ffff8ec782d72aa0 R15: 0000000002400000 [67.465436] FS: 00007f01386a8580(0000) GS:ffff8ec809000000(0000) knlGS:0000000000000000 [67.511660] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [67.535047] CR2: 00007f01382fa000 CR3: 0000000109a34000 CR4: 0000000000750ee0 [67.558449] PKRU: 55555554 [67.581146] note: mount[613] exited with preempt_count 2 The image has a chunk item which has a logical start 37748736 and length 18446744073701163008 (-8M). The calculated end 29360127 overflows. EEXIST was caught by insert_state() because of the duplicate end and extent_io_tree_panic() was called. Add overflow check of chunk item end to tree checker so it can be detected early at mount time. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=208929 CC: stable@vger.kernel.org # 4.19+ Reviewed-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: Su Yue <l@damenly.su> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-01-19cifs: fix interrupted close commandsPaulo Alcantara1-1/+1
commit 2659d3bff3e1b000f49907d0839178b101a89887 upstream. Retry close command if it gets interrupted to not leak open handles on the server. Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Reported-by: Duncan Findlay <duncf@duncf.ca> Suggested-by: Pavel Shilovsky <pshilov@microsoft.com> Fixes: 6988a619f5b7 ("cifs: allow syscalls to be restarted in __smb_send_rqst()") Cc: stable@vger.kernel.org Reviewd-by: Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-19cifs: check pointer before freeingTom Rix1-1/+2
commit 77b6ec01c29aade01701aa30bf1469acc7f2be76 upstream. clang static analysis reports this problem dfs_cache.c:591:2: warning: Argument to kfree() is a constant address (18446744073709551614), which is not memory allocated by malloc() kfree(vi); ^~~~~~~~~ In dfs_cache_del_vol() the volume info pointer 'vi' being freed is the return of a call to find_vol(). The large constant address is find_vol() returning an error. Add an error check to dfs_cache_del_vol() similar to the one done in dfs_cache_update_vol(). Fixes: 54be1f6c1c37 ("cifs: Add DFS cache routines") Signed-off-by: Tom Rix <trix@redhat.com> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> CC: <stable@vger.kernel.org> # v5.0+ Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-19ext4: fix bug for rename with RENAME_WHITEOUTyangerkun1-8/+9
commit 6b4b8e6b4ad8553660421d6360678b3811d5deb9 upstream. We got a "deleted inode referenced" warning cross our fsstress test. The bug can be reproduced easily with following steps: cd /dev/shm mkdir test/ fallocate -l 128M img mkfs.ext4 -b 1024 img mount img test/ dd if=/dev/zero of=test/foo bs=1M count=128 mkdir test/dir/ && cd test/dir/ for ((i=0;i<1000;i++)); do touch file$i; done # consume all block cd ~ && renameat2(AT_FDCWD, /dev/shm/test/dir/file1, AT_FDCWD, /dev/shm/test/dir/dst_file, RENAME_WHITEOUT) # ext4_add_entry in ext4_rename will return ENOSPC!! cd /dev/shm/ && umount test/ && mount img test/ && ls -li test/dir/file1 We will get the output: "ls: cannot access 'test/dir/file1': Structure needs cleaning" and the dmesg show: "EXT4-fs error (device loop0): ext4_lookup:1626: inode #2049: comm ls: deleted inode referenced: 139" ext4_rename will create a special inode for whiteout and use this 'ino' to replace the source file's dir entry 'ino'. Once error happens latter(the error above was the ENOSPC return from ext4_add_entry in ext4_rename since all space has been consumed), the cleanup do drop the nlink for whiteout, but forget to restore 'ino' with source file. This will trigger the bug describle as above. Signed-off-by: yangerkun <yangerkun@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Cc: stable@vger.kernel.org Fixes: cd808deced43 ("ext4: support RENAME_WHITEOUT") Link: https://lore.kernel.org/r/20210105062857.3566-1-yangerkun@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-19ext4: fix wrong list_splice in ext4_fc_cleanupDaejun Park1-1/+1
commit 31e203e09f036f48e7c567c2d32df0196bbd303f upstream. After full/fast commit, entries in staging queue are promoted to main queue. In ext4_fs_cleanup function, it splice to staging queue to staging queue. Fixes: aa75f4d3daaeb ("ext4: main fast-commit commit path") Signed-off-by: Daejun Park <daejun7.park@samsung.com> Reviewed-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com> Link: https://lore.kernel.org/r/20201230094851epcms2p6eeead8cc984379b37b2efd21af90fd1a@epcms2p6 Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-19ext4: use IS_ERR instead of IS_ERR_OR_NULL and set inode null when IS_ERRYi Li1-11/+12
commit 23dd561ad9eae02b4d51bb502fe4e1a0666e9567 upstream. 1: ext4_iget/ext4_find_extent never returns NULL, use IS_ERR instead of IS_ERR_OR_NULL to fix this. 2: ext4_fc_replay_inode should set the inode to NULL when IS_ERR. and go to call iput properly. Fixes: 8016e29f4362 ("ext4: fast commit recovery path") Signed-off-by: Yi Li <yili@winhong.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20201230033827.3996064-1-yili@winhong.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-19btrfs: prevent NULL pointer dereference in extent_io_tree_panicSu Yue1-3/+1
commit 29b665cc51e8b602bf2a275734349494776e3dbc upstream. Some extent io trees are initialized with NULL private member (e.g. btrfs_device::alloc_state and btrfs_fs_info::excluded_extents). Dereference of a NULL tree->private as inode pointer will cause panic. Pass tree->fs_info as it's known to be valid in all cases. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=208929 Fixes: 05912a3c04eb ("btrfs: drop extent_io_ops::tree_fs_info callback") CC: stable@vger.kernel.org # 4.19+ Reviewed-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: Su Yue <l@damenly.su> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-19btrfs: reloc: fix wrong file extent type check to avoid false ENOENTQu Wenruo1-1/+6
commit 50e31ef486afe60f128d42fb9620e2a63172c15c upstream. [BUG] There are several bug reports about recent kernel unable to relocate certain data block groups. Sometimes the error just goes away, but there is one reporter who can reproduce it reliably. The dmesg would look like: [438.260483] BTRFS info (device dm-10): balance: start -dvrange=34625344765952..34625344765953 [438.269018] BTRFS info (device dm-10): relocating block group 34625344765952 flags data|raid1 [450.439609] BTRFS info (device dm-10): found 167 extents, stage: move data extents [463.501781] BTRFS info (device dm-10): balance: ended with status: -2 [CAUSE] The ENOENT error is returned from the following call chain: add_data_references() |- delete_v1_space_cache(); |- if (!found) return -ENOENT; The variable @found is set to true if we find a data extent whose disk bytenr matches parameter @data_bytes. With extra debugging, the offending tree block looks like this: leaf bytenr = 42676709441536, data_bytenr = 34626327621632 ctime 1567904822.739884119 (2019-09-08 03:07:02) mtime 0.0 (1970-01-01 01:00:00) otime 0.0 (1970-01-01 01:00:00) item 27 key (51933 EXTENT_DATA 0) itemoff 9854 itemsize 53 generation 1517381 type 2 (prealloc) prealloc data disk byte 34626327621632 nr 262144 <<< prealloc data offset 0 nr 262144 item 28 key (52262 ROOT_ITEM 0) itemoff 9415 itemsize 439 generation 2618893 root_dirid 256 bytenr 42677048360960 level 3 refs 1 lastsnap 2618893 byte_limit 0 bytes_used 5557338112 flags 0x0(none) uuid d0d4361f-d231-6d40-8901-fe506e4b2b53 Although item 27 has disk bytenr 34626327621632, which matches the data_bytenr, its type is prealloc, not reg. This makes the existing code skip that item, and return ENOENT. [FIX] The code is modified in commit 19b546d7a1b2 ("btrfs: relocation: Use btrfs_find_all_leafs to locate data extent parent tree leaves"), before that commit, we use something like "if (type == BTRFS_FILE_EXTENT_INLINE) continue;" But in that offending commit, we use (type == BTRFS_FILE_EXTENT_REG), ignoring BTRFS_FILE_EXTENT_PREALLOC. Fix it by also checking BTRFS_FILE_EXTENT_PREALLOC. Reported-by: Stéphane Lesimple <stephane_btrfs2@lesimple.fr> Link: https://lore.kernel.org/linux-btrfs/505cabfa88575ed6dbe7cb922d8914fb@lesimple.fr Fixes: 19b546d7a1b2 ("btrfs: relocation: Use btrfs_find_all_leafs to locate data extent parent tree leaves") CC: stable@vger.kernel.org # 5.6+ Tested-By: Stéphane Lesimple <stephane_btrfs2@lesimple.fr> Reviewed-by: Su Yue <l@damenly.su> Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-17zonefs: select CONFIG_CRC32Arnd Bergmann1-0/+1
commit 4f8b848788f77c7f5c3bd98febce66b7aa14785f upstream. When CRC32 is disabled, zonefs cannot be linked: ld: fs/zonefs/super.o: in function `zonefs_fill_super': Add a Kconfig 'select' statement for it. Fixes: 8dcc1a9d90c1 ("fs: New zonefs file system") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-17fanotify: Fix sys_fanotify_mark() on native x86-32Brian Gerst1-10/+7
commit 2ca408d9c749c32288bc28725f9f12ba30299e8f upstream. Commit 121b32a58a3a ("x86/entry/32: Use IA32-specific wrappers for syscalls taking 64-bit arguments") converted native x86-32 which take 64-bit arguments to use the compat handlers to allow conversion to passing args via pt_regs. sys_fanotify_mark() was however missed, as it has a general compat handler. Add a config option that will use the syscall wrapper that takes the split args for native 32-bit. [ bp: Fix typo in Kconfig help text. ] Fixes: 121b32a58a3a ("x86/entry/32: Use IA32-specific wrappers for syscalls taking 64-bit arguments") Reported-by: Paweł Jasiak <pawel@jasiak.xyz> Signed-off-by: Brian Gerst <brgerst@gmail.com> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Jan Kara <jack@suse.cz> Acked-by: Andy Lutomirski <luto@kernel.org> Link: https://lkml.kernel.org/r/20201130223059.101286-1-brgerst@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-17btrfs: shrink delalloc pages instead of full inodesJosef Bacik2-18/+46
[ Upstream commit e076ab2a2ca70a0270232067cd49f76cd92efe64 ] Commit 38d715f494f2 ("btrfs: use btrfs_start_delalloc_roots in shrink_delalloc") cleaned up how we do delalloc shrinking by utilizing some infrastructure we have in place to flush inodes that we use for device replace and snapshot. However this introduced a pretty serious performance regression. To reproduce the user untarred the source tarball of Firefox (360MiB xz compressed/1.5GiB uncompressed), and would see it take anywhere from 5 to 20 times as long to untar in 5.10 compared to 5.9. This was observed on fast devices (SSD and better) and not on HDD. The root cause is because before we would generally use the normal writeback path to reclaim delalloc space, and for this we would provide it with the number of pages we wanted to flush. The referenced commit changed this to flush that many inodes, which drastically increased the amount of space we were flushing in certain cases, which severely affected performance. We cannot revert this patch unfortunately because of 3d45f221ce62 ("btrfs: fix deadlock when cloning inline extent and low on free metadata space") which requires the ability to skip flushing inodes that are being cloned in certain scenarios, which means we need to keep using our flushing infrastructure or risk re-introducing the deadlock. Instead to fix this problem we can go back to providing btrfs_start_delalloc_roots with a number of pages to flush, and then set up a writeback_control and utilize sync_inode() to handle the flushing for us. This gives us the same behavior we had prior to the fix, while still allowing us to avoid the deadlock that was fixed by Filipe. I redid the users original test and got the following results on one of our test machines (256GiB of ram, 56 cores, 2TiB Intel NVMe drive) 5.9 0m54.258s 5.10 1m26.212s 5.10+patch 0m38.800s 5.10+patch is significantly faster than plain 5.9 because of my patch series "Change data reservations to use the ticketing infra" which contained the patch that introduced the regression, but generally improved the overall ENOSPC flushing mechanisms. Additional testing on consumer-grade SSD (8GiB ram, 8 CPU) confirm the results: 5.10.5 4m00s 5.10.5+patch 1m08s 5.11-rc2 5m14s 5.11-rc2+patch 1m30s Reported-by: René Rebe <rene@exactcode.de> Fixes: 38d715f494f2 ("btrfs: use btrfs_start_delalloc_roots in shrink_delalloc") CC: stable@vger.kernel.org # 5.10 Signed-off-by: Josef Bacik <josef@toxicpanda.com> Tested-by: David Sterba <dsterba@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> [ add my test results ] Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-01-17btrfs: fix deadlock when cloning inline extent and low on free metadata spaceFilipe Manana7-8/+40
[ Upstream commit 3d45f221ce627d13e2e6ef3274f06750c84a6542 ] When cloning an inline extent there are cases where we can not just copy the inline extent from the source range to the target range (e.g. when the target range starts at an offset greater than zero). In such cases we copy the inline extent's data into a page of the destination inode and then dirty that page. However, after that we will need to start a transaction for each processed extent and, if we are ever low on available metadata space, we may need to flush existing delalloc for all dirty inodes in an attempt to release metadata space - if that happens we may deadlock: * the async reclaim task queued a delalloc work to flush delalloc for the destination inode of the clone operation; * the task executing that delalloc work gets blocked waiting for the range with the dirty page to be unlocked, which is currently locked by the task doing the clone operation; * the async reclaim task blocks waiting for the delalloc work to complete; * the cloning task is waiting on the waitqueue of its reservation ticket while holding the range with the dirty page locked in the inode's io_tree; * if metadata space is not released by some other task (like delalloc for some other inode completing for example), the clone task waits forever and as a consequence the delalloc work and async reclaim tasks will hang forever as well. Releasing more space on the other hand may require starting a transaction, which will hang as well when trying to reserve metadata space, resulting in a deadlock between all these tasks. When this happens, traces like the following show up in dmesg/syslog: [87452.323003] INFO: task kworker/u16:11:1810830 blocked for more than 120 seconds. [87452.323644] Tainted: G B W 5.10.0-rc4-btrfs-next-73 #1 [87452.324248] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [87452.324852] task:kworker/u16:11 state:D stack: 0 pid:1810830 ppid: 2 flags:0x00004000 [87452.325520] Workqueue: btrfs-flush_delalloc btrfs_work_helper [btrfs] [87452.326136] Call Trace: [87452.326737] __schedule+0x5d1/0xcf0 [87452.327390] schedule+0x45/0xe0 [87452.328174] lock_extent_bits+0x1e6/0x2d0 [btrfs] [87452.328894] ? finish_wait+0x90/0x90 [87452.329474] btrfs_invalidatepage+0x32c/0x390 [btrfs] [87452.330133] ? __mod_memcg_state+0x8e/0x160 [87452.330738] __extent_writepage+0x2d4/0x400 [btrfs] [87452.331405] extent_write_cache_pages+0x2b2/0x500 [btrfs] [87452.332007] ? lock_release+0x20e/0x4c0 [87452.332557] ? trace_hardirqs_on+0x1b/0xf0 [87452.333127] extent_writepages+0x43/0x90 [btrfs] [87452.333653] ? lock_acquire+0x1a3/0x490 [87452.334177] do_writepages+0x43/0xe0 [87452.334699] ? __filemap_fdatawrite_range+0xa4/0x100 [87452.335720] __filemap_fdatawrite_range+0xc5/0x100 [87452.336500] btrfs_run_delalloc_work+0x17/0x40 [btrfs] [87452.337216] btrfs_work_helper+0xf1/0x600 [btrfs] [87452.337838] process_one_work+0x24e/0x5e0 [87452.338437] worker_thread+0x50/0x3b0 [87452.339137] ? process_one_work+0x5e0/0x5e0 [87452.339884] kthread+0x153/0x170 [87452.340507] ? kthread_mod_delayed_work+0xc0/0xc0 [87452.341153] ret_from_fork+0x22/0x30 [87452.341806] INFO: task kworker/u16:1:2426217 blocked for more than 120 seconds. [87452.342487] Tainted: G B W 5.10.0-rc4-btrfs-next-73 #1 [87452.343274] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [87452.344049] task:kworker/u16:1 state:D stack: 0 pid:2426217 ppid: 2 flags:0x00004000 [87452.344974] Workqueue: events_unbound btrfs_async_reclaim_metadata_space [btrfs] [87452.345655] Call Trace: [87452.346305] __schedule+0x5d1/0xcf0 [87452.346947] ? kvm_clock_read+0x14/0x30 [87452.347676] ? wait_for_completion+0x81/0x110 [87452.348389] schedule+0x45/0xe0 [87452.349077] schedule_timeout+0x30c/0x580 [87452.349718] ? _raw_spin_unlock_irqrestore+0x3c/0x60 [87452.350340] ? lock_acquire+0x1a3/0x490 [87452.351006] ? try_to_wake_up+0x7a/0xa20 [87452.351541] ? lock_release+0x20e/0x4c0 [87452.352040] ? lock_acquired+0x199/0x490 [87452.352517] ? wait_for_completion+0x81/0x110 [87452.353000] wait_for_completion+0xab/0x110 [87452.353490] start_delalloc_inodes+0x2af/0x390 [btrfs] [87452.353973] btrfs_start_delalloc_roots+0x12d/0x250 [btrfs] [87452.354455] flush_space+0x24f/0x660 [btrfs] [87452.355063] btrfs_async_reclaim_metadata_space+0x1bb/0x480 [btrfs] [87452.355565] process_one_work+0x24e/0x5e0 [87452.356024] worker_thread+0x20f/0x3b0 [87452.356487] ? process_one_work+0x5e0/0x5e0 [87452.356973] kthread+0x153/0x170 [87452.357434] ? kthread_mod_delayed_work+0xc0/0xc0 [87452.357880] ret_from_fork+0x22/0x30 (...) < stack traces of several tasks waiting for the locks of the inodes of the clone operation > (...) [92867.444138] RSP: 002b:00007ffc3371bbe8 EFLAGS: 00000246 ORIG_RAX: 0000000000000052 [92867.444624] RAX: ffffffffffffffda RBX: 00007ffc3371bea0 RCX: 00007f61efe73f97 [92867.445116] RDX: 0000000000000000 RSI: 0000560fbd5d7a40 RDI: 0000560fbd5d8960 [92867.445595] RBP: 00007ffc3371beb0 R08: 0000000000000001 R09: 0000000000000003 [92867.446070] R10: 00007ffc3371b996 R11: 0000000000000246 R12: 0000000000000000 [92867.446820] R13: 000000000000001f R14: 00007ffc3371bea0 R15: 00007ffc3371beb0 [92867.447361] task:fsstress state:D stack: 0 pid:2508238 ppid:2508153 flags:0x00004000 [92867.447920] Call Trace: [92867.448435] __schedule+0x5d1/0xcf0 [92867.448934] ? _raw_spin_unlock_irqrestore+0x3c/0x60 [92867.449423] schedule+0x45/0xe0 [92867.449916] __reserve_bytes+0x4a4/0xb10 [btrfs] [92867.450576] ? finish_wait+0x90/0x90 [92867.451202] btrfs_reserve_metadata_bytes+0x29/0x190 [btrfs] [92867.451815] btrfs_block_rsv_add+0x1f/0x50 [btrfs] [92867.452412] start_transaction+0x2d1/0x760 [btrfs] [92867.453216] clone_copy_inline_extent+0x333/0x490 [btrfs] [92867.453848] ? lock_release+0x20e/0x4c0 [92867.454539] ? btrfs_search_slot+0x9a7/0xc30 [btrfs] [92867.455218] btrfs_clone+0x569/0x7e0 [btrfs] [92867.455952] btrfs_clone_files+0xf6/0x150 [btrfs] [92867.456588] btrfs_remap_file_range+0x324/0x3d0 [btrfs] [92867.457213] do_clone_file_range+0xd4/0x1f0 [92867.457828] vfs_clone_file_range+0x4d/0x230 [92867.458355] ? lock_release+0x20e/0x4c0 [92867.458890] ioctl_file_clone+0x8f/0xc0 [92867.459377] do_vfs_ioctl+0x342/0x750 [92867.459913] __x64_sys_ioctl+0x62/0xb0 [92867.460377] do_syscall_64+0x33/0x80 [92867.460842] entry_SYSCALL_64_after_hwframe+0x44/0xa9 (...) < stack traces of more tasks blocked on metadata reservation like the clone task above, because the async reclaim task has deadlocked > (...) Another thing to notice is that the worker task that is deadlocked when trying to flush the destination inode of the clone operation is at btrfs_invalidatepage(). This is simply because the clone operation has a destination offset greater than the i_size and we only update the i_size of the destination file after cloning an extent (just like we do in the buffered write path). Since the async reclaim path uses btrfs_start_delalloc_roots() to trigger the flushing of delalloc for all inodes that have delalloc, add a runtime flag to an inode to signal it should not be flushed, and for inodes with that flag set, start_delalloc_inodes() will simply skip them. When the cloning code needs to dirty a page to copy an inline extent, set that flag on the inode and then clear it when the clone operation finishes. This could be sporadically triggered with test case generic/269 from fstests, which exercises many fsstress processes running in parallel with several dd processes filling up the entire filesystem. CC: stable@vger.kernel.org # 5.9+ Fixes: 05a5a7621ce6 ("Btrfs: implement full reflink support for inline extents") Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-01-17btrfs: skip unnecessary searches for xattrs when logging an inodeFilipe Manana3-1/+18
[ Upstream commit f2f121ab500d0457cc9c6f54269d21ffdf5bd304 ] Every time we log an inode we lookup in the fs/subvol tree for xattrs and if we have any, log them into the log tree. However it is very common to have inodes without any xattrs, so doing the search wastes times, but more importantly it adds contention on the fs/subvol tree locks, either making the logging code block and wait for tree locks or making the logging code making other concurrent operations block and wait. The most typical use cases where xattrs are used are when capabilities or ACLs are defined for an inode, or when SELinux is enabled. This change makes the logging code detect when an inode does not have xattrs and skip the xattrs search the next time the inode is logged, unless the inode is evicted and loaded again or a xattr is added to the inode. Therefore skipping the search for xattrs on inodes that don't ever have xattrs and are fsynced with some frequency. The following script that calls dbench was used to measure the impact of this change on a VM with 8 CPUs, 16Gb of ram, using a raw NVMe device directly (no intermediary filesystem on the host) and using a non-debug kernel (default configuration on Debian distributions): $ cat test.sh #!/bin/bash DEV=/dev/sdk MNT=/mnt/sdk MOUNT_OPTIONS="-o ssd" mkfs.btrfs -f -m single -d single $DEV mount $MOUNT_OPTIONS $DEV $MNT dbench -D $MNT -t 200 40 umount $MNT The results before this change: Operation Count AvgLat MaxLat ---------------------------------------- NTCreateX 5761605 0.172 312.057 Close 4232452 0.002 10.927 Rename 243937 1.406 277.344 Unlink 1163456 0.631 298.402 Deltree 160 11.581 221.107 Mkdir 80 0.003 0.005 Qpathinfo 5221410 0.065 122.309 Qfileinfo 915432 0.001 3.333 Qfsinfo 957555 0.003 3.992 Sfileinfo 469244 0.023 20.494 Find 2018865 0.448 123.659 WriteX 2874851 0.049 118.529 ReadX 9030579 0.004 21.654 LockX 18754 0.003 4.423 UnlockX 18754 0.002 0.331 Flush 403792 10.944 359.494 Throughput 908.444 MB/sec 40 clients 40 procs max_latency=359.500 ms The results after this change: Operation Count AvgLat MaxLat ---------------------------------------- NTCreateX 6442521 0.159 230.693 Close 4732357 0.002 10.972 Rename 272809 1.293 227.398 Unlink 1301059 0.563 218.500 Deltree 160 7.796 54.887 Mkdir 80 0.008 0.478 Qpathinfo 5839452 0.047 124.330 Qfileinfo 1023199 0.001 4.996 Qfsinfo 1070760 0.003 5.709 Sfileinfo 524790 0.033 21.765 Find 2257658 0.314 125.611 WriteX 3211520 0.040 232.135 ReadX 10098969 0.004 25.340 LockX 20974 0.003 1.569 UnlockX 20974 0.002 3.475 Flush 451553 10.287 331.037 Throughput 1011.77 MB/sec 40 clients 40 procs max_latency=331.045 ms +10.8% throughput, -8.2% max latency Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-01-17io_uring: Fix return value from alloc_fixed_file_ref_nodeMatthew Wilcox (Oracle)1-6/+6
[ Upstream commit 3e2224c5867fead6c0b94b84727cc676ac6353a3 ] alloc_fixed_file_ref_node() currently returns an ERR_PTR on failure. io_sqe_files_unregister() expects it to return NULL and since it can only return -ENOMEM, it makes more sense to change alloc_fixed_file_ref_node() to behave that way. Fixes: 1ffc54220c44 ("io_uring: fix io_sqe_files_unregister() hangs") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-01-17io_uring: patch up IOPOLL overflow_flush syncPavel Begunkov1-37/+41
commit 6c503150ae33ee19036255cfda0998463613352c upstream IOPOLL skips completion locking but keeps it under uring_lock, thus io_cqring_overflow_flush() and so io_cqring_events() need additional locking with uring_lock in some cases for IOPOLL. Remove __io_cqring_overflow_flush() from io_cqring_events(), introduce a wrapper around flush doing needed synchronisation and call it by hand. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-01-17io_uring: limit {io|sq}poll submit locking scopePavel Begunkov1-3/+6
commit 89448c47b8452b67c146dc6cad6f737e004c5caf upstream We don't need to take uring_lock for SQPOLL|IOPOLL to do io_cqring_overflow_flush() when cq_overflow_list is empty, remove it from the hot path. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-01-17io_uring: synchronise IOPOLL on task_submit failPavel Begunkov1-5/+6
commit 81b6d05ccad4f3d8a9dfb091fb46ad6978ee40e4 upstream io_req_task_submit() might be called for IOPOLL, do the fail path under uring_lock to comply with IOPOLL synchronisation based solely on it. Cc: stable@vger.kernel.org # 5.5+ Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-01-12btrfs: send: fix wrong file path when there is an inode with a pending rmdirFilipe Manana1-18/+31
commit 0b3f407e6728d990ae1630a02c7b952c21c288d3 upstream. When doing an incremental send, if we have a new inode that happens to have the same number that an old directory inode had in the base snapshot and that old directory has a pending rmdir operation, we end up computing a wrong path for the new inode, causing the receiver to fail. Example reproducer: $ cat test-send-rmdir.sh #!/bin/bash DEV=/dev/sdi MNT=/mnt/sdi mkfs.btrfs -f $DEV >/dev/null mount $DEV $MNT mkdir $MNT/dir touch $MNT/dir/file1 touch $MNT/dir/file2 touch $MNT/dir/file3 # Filesystem looks like: # # . (ino 256) # |----- dir/ (ino 257) # |----- file1 (ino 258) # |----- file2 (ino 259) # |----- file3 (ino 260) # btrfs subvolume snapshot -r $MNT $MNT/snap1 btrfs send -f /tmp/snap1.send $MNT/snap1 # Now remove our directory and all its files. rm -fr $MNT/dir # Unmount the filesystem and mount it again. This is to ensure that # the next inode that is created ends up with the same inode number # that our directory "dir" had, 257, which is the first free "objectid" # available after mounting again the filesystem. umount $MNT mount $DEV $MNT # Now create a new file (it could be a directory as well). touch $MNT/newfile # Filesystem now looks like: # # . (ino 256) # |----- newfile (ino 257) # btrfs subvolume snapshot -r $MNT $MNT/snap2 btrfs send -f /tmp/snap2.send -p $MNT/snap1 $MNT/snap2 # Now unmount the filesystem, create a new one, mount it and try to apply # both send streams to recreate both snapshots. umount $DEV mkfs.btrfs -f $DEV >/dev/null mount $DEV $MNT btrfs receive -f /tmp/snap1.send $MNT btrfs receive -f /tmp/snap2.send $MNT umount $MNT When running the test, the receive operation for the incremental stream fails: $ ./test-send-rmdir.sh Create a readonly snapshot of '/mnt/sdi' in '/mnt/sdi/snap1' At subvol /mnt/sdi/snap1 Create a readonly snapshot of '/mnt/sdi' in '/mnt/sdi/snap2' At subvol /mnt/sdi/snap2 At subvol snap1 At snapshot snap2 ERROR: chown o257-9-0 failed: No such file or directory So fix this by tracking directories that have a pending rmdir by inode number and generation number, instead of only inode number. A test case for fstests follows soon. Reported-by: Massimo B. <massimo.b@gmx.net> Tested-by: Massimo B. <massimo.b@gmx.net> Link: https://lore.kernel.org/linux-btrfs/6ae34776e85912960a253a8327068a892998e685.camel@gmx.net/ CC: stable@vger.kernel.org # 4.19+ Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-12btrfs: qgroup: don't try to wait flushing if we're already holding a transactionQu Wenruo1-10/+20
commit ae5e070eaca9dbebde3459dd8f4c2756f8c097d0 upstream. There is a chance of racing for qgroup flushing which may lead to deadlock: Thread A | Thread B (not holding trans handle) | (holding a trans handle) --------------------------------+-------------------------------- __btrfs_qgroup_reserve_meta() | __btrfs_qgroup_reserve_meta() |- try_flush_qgroup() | |- try_flush_qgroup() |- QGROUP_FLUSHING bit set | | | | |- test_and_set_bit() | | |- wait_event() |- btrfs_join_transaction() | |- btrfs_commit_transaction()| !!! DEAD LOCK !!! Since thread A wants to commit transaction, but thread B is holding a transaction handle, blocking the commit. At the same time, thread B is waiting for thread A to finish its commit. This is just a hot fix, and would lead to more EDQUOT when we're near the qgroup limit. The proper fix would be to make all metadata/data reservations happen without holding a transaction handle. CC: stable@vger.kernel.org # 5.9+ Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-09exec: Transform exec_update_mutex into a rw_semaphoreEric W. Biederman2-11/+11
[ Upstream commit f7cfd871ae0c5008d94b6f66834e7845caa93c15 ] Recently syzbot reported[0] that there is a deadlock amongst the users of exec_update_mutex. The problematic lock ordering found by lockdep was: perf_event_open (exec_update_mutex -> ovl_i_mutex) chown (ovl_i_mutex -> sb_writes) sendfile (sb_writes -> p->lock) by reading from a proc file and writing to overlayfs proc_pid_syscall (p->lock -> exec_update_mutex) While looking at possible solutions it occured to me that all of the users and possible users involved only wanted to state of the given process to remain the same. They are all readers. The only writer is exec. There is no reason for readers to block on each other. So fix this deadlock by transforming exec_update_mutex into a rw_semaphore named exec_update_lock that only exec takes for writing. Cc: Jann Horn <jannh@google.com> Cc: Vasiliy Kulikov <segoon@openwall.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Bernd Edlinger <bernd.edlinger@hotmail.de> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Christopher Yeoh <cyeoh@au1.ibm.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Sargun Dhillon <sargun@sargun.me> Cc: Christian Brauner <christian.brauner@ubuntu.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Fixes: eea9673250db ("exec: Add exec_update_mutex to replace cred_guard_mutex") [0] https://lkml.kernel.org/r/00000000000063640c05ade8e3de@google.com Reported-by: syzbot+db9cdf3dd1f64252c6ef@syzkaller.appspotmail.com Link: https://lkml.kernel.org/r/87ft4mbqen.fsf@x220.int.ebiederm.org Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-01-09fuse: fix bad inodeMiklos Szeredi7-17/+74
[ Upstream commit 5d069dbe8aaf2a197142558b6fb2978189ba3454 ] Jan Kara's analysis of the syzbot report (edited): The reproducer opens a directory on FUSE filesystem, it then attaches dnotify mark to the open directory. After that a fuse_do_getattr() call finds that attributes returned by the server are inconsistent, and calls make_bad_inode() which, among other things does: inode->i_mode = S_IFREG; This then confuses dnotify which doesn't tear down its structures properly and eventually crashes. Avoid calling make_bad_inode() on a live inode: switch to a private flag on the fuse inode. Also add the test to ops which the bad_inode_ops would have caught. This bug goes back to the initial merge of fuse in 2.6.14... Reported-by: syzbot+f427adf9324b92652ccc@syzkaller.appspotmail.com Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Tested-by: Jan Kara <jack@suse.cz> Cc: <stable@vger.kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-01-06ext4: avoid s_mb_prefetch to be zero in individual scenariosChunguang Xu1-4/+5
[ Upstream commit 82ef1370b0c1757ab4ce29f34c52b4e93839b0aa ] Commit cfd732377221 ("ext4: add prefetching for block allocation bitmaps") introduced block bitmap prefetch, and expects to read block bitmaps of flex_bg through an IO. However, it seems to ignore the value range of s_log_groups_per_flex. In the scenario where the value of s_log_groups_per_flex is greater than 27, s_mb_prefetch or s_mb_prefetch_limit will overflow, cause a divide zero exception. In addition, the logic of calculating nr is also flawed, because the size of flexbg is fixed during a single mount, but s_mb_prefetch can be modified, which causes nr to fail to meet the value condition of [1, flexbg_size]. To solve this problem, we need to set the upper limit of s_mb_prefetch. Since we expect to load block bitmaps of a flex_bg through an IO, we can consider determining a reasonable upper limit among the IO limit parameters. After consideration, we chose BLK_MAX_SEGMENT_SIZE. This is a good choice to solve divide zero problem and avoiding performance degradation. [ Some minor code simplifications to make the changes easy to follow -- TYT ] Reported-by: Tosk Robot <tencent_os_robot@tencent.com> Signed-off-by: Chunguang Xu <brookxu@tencent.com> Reviewed-by: Samuel Liao <samuelliao@tencent.com> Reviewed-by: Andreas Dilger <adilger@dilger.ca> Link: https://lore.kernel.org/r/1607051143-24508-1-git-send-email-brookxu@tencent.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-01-06io_uring: remove racy overflow list fast checksPavel Begunkov1-4/+1
[ Upstream commit 9cd2be519d05ee78876d55e8e902b7125f78b74f ] list_empty_careful() is not racy only if some conditions are met, i.e. no re-adds after del_init. io_cqring_overflow_flush() does list_move(), so it's actually racy. Remove those checks, we have ->cq_check_overflow for the fast path. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-01-06ceph: fix inode refcount leak when ceph_fill_inode on non-I_NEW inode failsJeff Layton1-0/+2
[ Upstream commit 68cbb8056a4c24c6a38ad2b79e0a9764b235e8fa ] Signed-off-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-01-06NFSv4.2: Don't error when exiting early on a READ_PLUS buffer overflowTrond Myklebust1-19/+17
[ Upstream commit 503b934a752f7e789a5f33217520e0a79f3096ac ] Expanding the READ_PLUS extents can cause the read buffer to overflow. If it does, then don't error, but just exit early. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-01-06fs/namespace.c: WARN if mnt_count has become negativeEric Biggers2-4/+7
[ Upstream commit edf7ddbf1c5eb98b720b063b73e20e8a4a1ce673 ] Missing calls to mntget() (or equivalently, too many calls to mntput()) are hard to detect because mntput() delays freeing mounts using task_work_add(), then again using call_rcu(). As a result, mnt_count can often be decremented to -1 without getting a KASAN use-after-free report. Such cases are still bugs though, and they point to real use-after-frees being possible. For an example of this, see the bug fixed by commit 1b0b9cc8d379 ("vfs: f