| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
[ Upstream commit 157501b0469969fc1ba53add5049575aadd79d80 ]
We are setting the parent directory's last_unlink_trans directly which
may result in a concurrent task starting to log the directory not see the
update and therefore can log the directory after we removed a child
directory which had a snapshot within instead of falling back to a
transaction commit. Replaying such a log tree would result in a mount
failure since we can't currently delete snapshots (and subvolumes) during
log replay. This is the type of failure described in commit 1ec9a1ae1e30
("Btrfs: fix unreplayable log after snapshot delete + parent dir fsync").
Fix this by using btrfs_record_snapshot_destroy() which updates the
last_unlink_trans field while holding the inode's log_mutex lock.
Fixes: 44f714dae50a ("Btrfs: improve performance on fsync against new inode after rename/unlink")
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 38074de35b015df5623f524d6f2b49a0cd395c40 ]
Allow the flexfiles error handling to recognise NFS level errors (as
opposed to RPC level errors) and handle them separately. The main
motivator is the NFSERR_PERM errors that get returned if the NFS client
connects to the data server through a port number that is lower than
1024. In that case, the client should disconnect and retry a READ on a
different data server, or it should retry a WRITE after reconnecting.
Reviewed-by: Tigran Mkrtchyan <tigran.mkrtchyan@desy.de>
Fixes: d67ae825a59d ("pnfs/flexfiles: Add the FlexFile Layout Driver")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
timing
[ Upstream commit 266b5d02e14f3a0e07414e11f239397de0577a1d ]
When the SMB server reboots and the client immediately accesses the mount
point, a race condition can occur that causes operations to fail with
"Host is down" error.
Reproduction steps:
# Mount SMB share
mount -t cifs //192.168.245.109/TEST /mnt/ -o xxxx
ls /mnt
# Reboot server
ssh root@192.168.245.109 reboot
ssh root@192.168.245.109 /path/to/cifs_server_setup.sh
ssh root@192.168.245.109 systemctl stop firewalld
# Immediate access fails
ls /mnt
ls: cannot access '/mnt': Host is down
# But works if there is a delay
The issue is caused by a race condition between negotiate and reconnect.
The 20-second negotiate timeout mechanism can interfere with the normal
recovery process when both are triggered simultaneously.
ls cifsd
---------------------------------------------------
cifs_getattr
cifs_revalidate_dentry
cifs_get_inode_info
cifs_get_fattr
smb2_query_path_info
smb2_compound_op
SMB2_open_init
smb2_reconnect
cifs_negotiate_protocol
smb2_negotiate
cifs_send_recv
smb_send_rqst
wait_for_response
cifs_demultiplex_thread
cifs_read_from_socket
cifs_readv_from_socket
server_unresponsive
cifs_reconnect
__cifs_reconnect
cifs_abort_connection
mid->mid_state = MID_RETRY_NEEDED
cifs_wake_up_task
cifs_sync_mid_result
// case MID_RETRY_NEEDED
rc = -EAGAIN;
// In smb2_negotiate()
rc = -EHOSTDOWN;
The server_unresponsive() timeout triggers cifs_reconnect(), which aborts
ongoing mid requests and causes the ls command to receive -EAGAIN, leading
to -EHOSTDOWN.
Fix this by introducing a dedicated `neg_start` field to
precisely tracks when the negotiate process begins. The timeout check
now uses this accurate timestamp instead of `lstrp`, ensuring that:
1. Timeout is only triggered after negotiate has actually run for 20s
2. The mechanism doesn't interfere with concurrent recovery processes
3. Uninitialized timestamps (value 0) don't trigger false timeouts
Fixes: 7ccc1465465d ("smb: client: fix hang in wait_for_response() for negproto")
Signed-off-by: Wang Zhaolong <wangzhaolong@huaweicloud.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 54a7081ed168b72a8a2d6ef4ba3a1259705a2926 ]
At __inode_add_ref() when processing extrefs, if we jump into the next
label we have an undefined value of victim_name.len, since we haven't
initialized it before we did the goto. This results in an invalid memory
access in the next iteration of the loop since victim_name.len was not
initialized to the length of the name of the current extref.
Fix this by initializing victim_name.len with the current extref's name
length.
Fixes: e43eec81c516 ("btrfs: use struct qstr instead of name and namelen pairs")
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
replay
[ Upstream commit 6561a40ceced9082f50c374a22d5966cf9fc5f5c ]
During log replay, at __add_inode_ref(), when we are searching for inode
ref keys we totally ignore if btrfs_search_slot() returns an error. This
may make a log replay succeed when there was an actual error and leave
some metadata inconsistency in a subvolume tree. Fix this by checking if
an error was returned from btrfs_search_slot() and if so, return it to
the caller.
Fixes: e02119d5a7b4 ("Btrfs: Add a write ahead tree log to optimize synchronous operations")
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c01776287414ca43412d1319d2877cbad65444ac ]
We found a few different systems hung up in writeback waiting on the same
page lock, and one task waiting on the NFS_LAYOUT_DRAIN bit in
pnfs_update_layout(), however the pnfs_layout_hdr's plh_outstanding count
was zero.
It seems most likely that this is another race between the waiter and waker
similar to commit ed0172af5d6f ("SUNRPC: Fix a race to wake a sync task").
Fix it up by applying the advised barrier.
Fixes: 880265c77ac4 ("pNFS: Avoid a live lock condition in pnfs_update_layout()")
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e8d6f3ab59468e230f3253efe5cb63efa35289f7 ]
syzbot reported a warning below [1] following a fault injection in
nfs_fs_proc_net_init(). [0]
When nfs_fs_proc_net_init() fails, /proc/net/rpc/nfs is not removed.
Later, rpc_proc_exit() tries to remove /proc/net/rpc, and the warning
is logged as the directory is not empty.
Let's handle the error of nfs_fs_proc_net_init() properly.
[0]:
FAULT_INJECTION: forcing a failure.
name failslab, interval 1, probability 0, space 0, times 0
CPU: 1 UID: 0 PID: 6120 Comm: syz.2.27 Not tainted 6.16.0-rc1-syzkaller-00010-g2c4a1f3fe03e #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/07/2025
Call Trace:
<TASK>
dump_stack_lvl (lib/dump_stack.c:123)
should_fail_ex (lib/fault-inject.c:73 lib/fault-inject.c:174)
should_failslab (mm/failslab.c:46)
kmem_cache_alloc_noprof (mm/slub.c:4178 mm/slub.c:4204)
__proc_create (fs/proc/generic.c:427)
proc_create_reg (fs/proc/generic.c:554)
proc_create_net_data (fs/proc/proc_net.c:120)
nfs_fs_proc_net_init (fs/nfs/client.c:1409)
nfs_net_init (fs/nfs/inode.c:2600)
ops_init (net/core/net_namespace.c:138)
setup_net (net/core/net_namespace.c:443)
copy_net_ns (net/core/net_namespace.c:576)
create_new_namespaces (kernel/nsproxy.c:110)
unshare_nsproxy_namespaces (kernel/nsproxy.c:218 (discriminator 4))
ksys_unshare (kernel/fork.c:3123)
__x64_sys_unshare (kernel/fork.c:3190)
do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
</TASK>
[1]:
remove_proc_entry: removing non-empty directory 'net/rpc', leaking at least 'nfs'
WARNING: CPU: 1 PID: 6120 at fs/proc/generic.c:727 remove_proc_entry+0x45e/0x530 fs/proc/generic.c:727
Modules linked in:
CPU: 1 UID: 0 PID: 6120 Comm: syz.2.27 Not tainted 6.16.0-rc1-syzkaller-00010-g2c4a1f3fe03e #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/07/2025
RIP: 0010:remove_proc_entry+0x45e/0x530 fs/proc/generic.c:727
Code: 3c 02 00 0f 85 85 00 00 00 48 8b 93 d8 00 00 00 4d 89 f0 4c 89 e9 48 c7 c6 40 ba a2 8b 48 c7 c7 60 b9 a2 8b e8 33 81 1d ff 90 <0f> 0b 90 90 e9 5f fe ff ff e8 04 69 5e ff 90 48 b8 00 00 00 00 00
RSP: 0018:ffffc90003637b08 EFLAGS: 00010282
RAX: 0000000000000000 RBX: ffff88805f534140 RCX: ffffffff817a92c8
RDX: ffff88807da99e00 RSI: ffffffff817a92d5 RDI: 0000000000000001
RBP: ffff888033431ac0 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000001 R11: 0000000000000001 R12: ffff888033431a00
R13: ffff888033431ae4 R14: ffff888033184724 R15: dffffc0000000000
FS: 0000555580328500(0000) GS:ffff888124a62000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f71733743e0 CR3: 000000007f618000 CR4: 00000000003526f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
sunrpc_exit_net+0x46/0x90 net/sunrpc/sunrpc_syms.c:76
ops_exit_list net/core/net_namespace.c:200 [inline]
ops_undo_list+0x2eb/0xab0 net/core/net_namespace.c:253
setup_net+0x2e1/0x510 net/core/net_namespace.c:457
copy_net_ns+0x2a6/0x5f0 net/core/net_namespace.c:574
create_new_namespaces+0x3ea/0xa90 kernel/nsproxy.c:110
unshare_nsproxy_namespaces+0xc0/0x1f0 kernel/nsproxy.c:218
ksys_unshare+0x45b/0xa40 kernel/fork.c:3121
__do_sys_unshare kernel/fork.c:3192 [inline]
__se_sys_unshare kernel/fork.c:3190 [inline]
__x64_sys_unshare+0x31/0x40 kernel/fork.c:3190
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xcd/0x490 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7fa1a6b8e929
Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007fff3a090368 EFLAGS: 00000246 ORIG_RAX: 0000000000000110
RAX: ffffffffffffffda RBX: 00007fa1a6db5fa0 RCX: 00007fa1a6b8e929
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000040000080
RBP: 00007fa1a6c10b39 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 00007fa1a6db5fa0 R14: 00007fa1a6db5fa0 R15: 0000000000000001
</TASK>
Fixes: d47151b79e32 ("nfs: expose /proc/net/sunrpc/nfs in net namespaces")
Reported-by: syzbot+a4cc4ac22daa4a71b87c@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=a4cc4ac22daa4a71b87c
Tested-by: syzbot+a4cc4ac22daa4a71b87c@syzkaller.appspotmail.com
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 4d8cbf6dbcdaebe949461b0a933ae4c71cb53edc upstream.
Memory for 'struct omfs_extent' and a 'e_extent_count' number of extent
entries is indirectly allocated through 'bh->b_data', which is a pointer
to data within the page. This implies that the member 'e_entry'
(which is the start of extent entries) functions more like an array than
a single object of type 'struct omfs_extent_entry'.
So we better turn this object into a proper array, in this case a
flexible-array member, and with that, fix the following
-Wstringop-overflow warning seen after building s390 architecture with
allyesconfig (GCC 13):
fs/omfs/file.c: In function 'omfs_grow_extent':
include/linux/fortify-string.h:57:33: warning: writing 16 bytes into a region of size 0 [-Wstringop-overflow=]
57 | #define __underlying_memcpy __builtin_memcpy
| ^
include/linux/fortify-string.h:648:9: note: in expansion of macro '__underlying_memcpy'
648 | __underlying_##op(p, q, __fortify_size); \
| ^~~~~~~~~~~~~
include/linux/fortify-string.h:693:26: note: in expansion of macro '__fortify_memcpy_chk'
693 | #define memcpy(p, q, s) __fortify_memcpy_chk(p, q, s, \
| ^~~~~~~~~~~~~~~~~~~~
fs/omfs/file.c:170:9: note: in expansion of macro 'memcpy'
170 | memcpy(terminator, entry, sizeof(struct omfs_extent_entry));
| ^~~~~~
In file included from fs/omfs/omfs.h:8,
from fs/omfs/file.c:11:
fs/omfs/omfs_fs.h:80:34: note: at offset 16 into destination object 'e_entry' of size 16
80 | struct omfs_extent_entry e_entry; /* start of extent entries */
| ^~~~~~~
There are some binary differences before and after changes, but this are
expected due to the change in the size of 'struct omfs_extent' and the
necessary adjusments.
This helps with the ongoing efforts to globally enable
-Wstringop-overflow.
Link: https://github.com/KSPP/linux/issues/330
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d782d6e1d9078d6b82f8468dd6421050165e7d75 upstream.
Kees pointed out to just use directly ->Buffer instead of pointing
->Buffer using offset not to use unsafe_memcpy().
Suggested-by: Kees Cook <kees@kernel.org>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit dfd046d0ced19b6ff5f11ec4ceab0a83de924771 upstream.
rsp buffer is allocated larger than spnego_blob from
smb2_allocate_rsp_buf().
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ae4477f937569d097ca5dbce92a89ba384b49bc6 upstream.
Each superblock contains a copy of the device item for that device. In a
transaction which drops a chunk but doesn't create any new ones, we were
correctly updating the device item in the chunk tree but not copying
over the new bytes_used value to the superblock.
This can be seen by doing the following:
# dd if=/dev/zero of=test bs=4096 count=2621440
# mkfs.btrfs test
# mount test /root/temp
# cd /root/temp
# for i in {00..10}; do dd if=/dev/zero of=$i bs=4096 count=32768; done
# sync
# rm *
# sync
# btrfs balance start -dusage=0 .
# sync
# cd
# umount /root/temp
# btrfs check test
For btrfs-check to detect this, you will also need my patch at
https://github.com/kdave/btrfs-progs/pull/991.
Change btrfs_remove_dev_extents() so that it adds the devices to the
fs_info->post_commit_list if they're not there already. This causes
btrfs_commit_device_sizes() to be called, which updates the bytes_used
value in the superblock.
Fixes: bbbf7243d62d ("btrfs: combine device update operations during transaction commit")
CC: stable@vger.kernel.org # 5.10+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Mark Harmstone <maharmstone@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3ca864de852bc91007b32d2a0d48993724f4abad upstream.
We have a race between a rename and directory inode logging that if it
happens and we crash/power fail before the rename completes, the next time
the filesystem is mounted, the log replay code will end up deleting the
file that was being renamed.
This is best explained following a step by step analysis of an interleaving
of steps that lead into this situation.
Consider the initial conditions:
1) We are at transaction N;
2) We have directories A and B created in a past transaction (< N);
3) We have inode X corresponding to a file that has 2 hardlinks, one in
directory A and the other in directory B, so we'll name them as
"A/foo_link1" and "B/foo_link2". Both hard links were persisted in a
past transaction (< N);
4) We have inode Y corresponding to a file that as a single hard link and
is located in directory A, we'll name it as "A/bar". This file was also
persisted in a past transaction (< N).
The steps leading to a file loss are the following and for all of them we
are under transaction N:
1) Link "A/foo_link1" is removed, so inode's X last_unlink_trans field
is updated to N, through btrfs_unlink() -> btrfs_record_unlink_dir();
2) Task A starts a rename for inode Y, with the goal of renaming from
"A/bar" to "A/baz", so we enter btrfs_rename();
3) Task A inserts the new BTRFS_INODE_REF_KEY for inode Y by calling
btrfs_insert_inode_ref();
4) Because the rename happens in the same directory, we don't set the
last_unlink_trans field of directoty A's inode to the current
transaction id, that is, we don't cal btrfs_record_unlink_dir();
5) Task A then removes the entries from directory A (BTRFS_DIR_ITEM_KEY
and BTRFS_DIR_INDEX_KEY items) when calling __btrfs_unlink_inode()
(actually the dir index item is added as a delayed item, but the
effect is the same);
6) Now before task A adds the new entry "A/baz" to directory A by
calling btrfs_add_link(), another task, task B is logging inode X;
7) Task B starts a fsync of inode X and after logging inode X, at
btrfs_log_inode_parent() it calls btrfs_log_all_parents(), since
inode X has a last_unlink_trans value of N, set at in step 1;
8) At btrfs_log_all_parents() we search for all parent directories of
inode X using the commit root, so we find directories A and B and log
them. Bu when logging direct A, we don't have a dir index item for
inode Y anymore, neither the old name "A/bar" nor for the new name
"A/baz" since the rename has deleted the old name but has not yet
inserted the new name - task A hasn't called yet btrfs_add_link() to
do that.
Note that logging directory A doesn't fallback to a transaction
commit because its last_unlink_trans has a lower value than the
current transaction's id (see step 4);
9) Task B finishes logging directories A and B and gets back to
btrfs_sync_file() where it calls btrfs_sync_log() to persist the log
tree;
10) Task B successfully persisted the log tree, btrfs_sync_log() completed
with success, and a power failure happened.
We have a log tree without any directory entry for inode Y, so the
log replay code deletes the entry for inode Y, name "A/bar", from the
subvolume tree since it doesn't exist in the log tree and the log
tree is authorative for its index (we logged a BTRFS_DIR_LOG_INDEX_KEY
item that covers the index range for the dentry that corresponds to
"A/bar").
Since there's no other hard link for inode Y and the log replay code
deletes the name "A/bar", the file is lost.
The issue wouldn't happen if task B synced the log only after task A
called btrfs_log_new_name(), which would update the log with the new name
for inode Y ("A/bar").
Fix this by pinning the log root during renames before removing the old
directory entry, and unpinning after btrfs_log_new_name() is called.
Fixes: 259c4b96d78d ("btrfs: stop doing unnecessary log updates during a rename")
CC: stable@vger.kernel.org # 5.18+
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
under it
[ Upstream commit ce7df19686530920f2f6b636e71ce5eb1d9303ef ]
If we are propagating across the userns boundary, we need to lock the
mounts added there. However, in case when something has already
been mounted there and we end up sliding a new tree under that,
the stuff that had been there before should not get locked.
IOW, lock_mnt_tree() should be called before we reparent the
preexisting tree on top of what we are adding.
Fixes: 3bd045cc9c4b ("separate copying and locking mount tree on cross-userns copies")
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a9201960623287927bf5776de3f70fb2fbde7e02 ]
This fixes an analogus bug that was fixed in modern filesystems:
a) xfs in commit 4b8d867ca6e2 ("xfs: don't over-report free space or
inodes in statvfs")
b) ext4 in commit f87d3af74193 ("ext4: don't over-report free space
or inodes in statvfs")
where statfs can report misleading / incorrect information where
project quota is enabled, and the free space is less than the
remaining quota.
This commit will resolve a test failure in generic/762 which tests
for this bug.
generic/762 - output mismatch (see /share/git/fstests/results//generic/762.out.bad)
# --- tests/generic/762.out 2025-04-15 10:21:53.371067071 +0800
# +++ /share/git/fstests/results//generic/762.out.bad 2025-05-13 16:13:37.000000000 +0800
# @@ -6,8 +6,10 @@
# root blocks2 is in range
# dir blocks2 is in range
# root bavail2 is in range
# -dir bavail2 is in range
# +dir bavail2 has value of 1539066
# +dir bavail2 is NOT in range 304734.87 .. 310891.13
# root blocks3 is in range
# ...
# (Run 'diff -u /share/git/fstests/tests/generic/762.out /share/git/fstests/results//generic/762.out.bad' to see the entire diff)
HINT: You _MAY_ be missing kernel fix:
XXXXXXXXXXXXXX xfs: don't over-report free space or inodes in statvfs
Cc: stable@kernel.org
Fixes: ddc34e328d06 ("f2fs: introduce f2fs_statfs_project")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 37bfb464ddca87f203071b5bd562cd91ddc0b40a ]
Validate db_agheight, db_agwidth, and db_agstart in dbMount to catch
corrupted metadata early and avoid undefined behavior in dbAllocAG.
Limits are derived from L2LPERCTL, LPERCTL/MAXAG, and CTLTREESIZE:
- agheight: 0 to L2LPERCTL/2 (0 to 5) ensures shift
(L2LPERCTL - 2*agheight) >= 0.
- agwidth: 1 to min(LPERCTL/MAXAG, 2^(L2LPERCTL - 2*agheight))
ensures agperlev >= 1.
- Ranges: 1-8 (agheight 0-3), 1-4 (agheight 4), 1 (agheight 5).
- LPERCTL/MAXAG = 1024/128 = 8 limits leaves per AG;
2^(10 - 2*agheight) prevents division to 0.
- agstart: 0 to CTLTREESIZE-1 - agwidth*(MAXAG-1) keeps ti within
stree (size 1365).
- Ranges: 0-1237 (agwidth 1), 0-348 (agwidth 8).
UBSAN: shift-out-of-bounds in fs/jfs/jfs_dmap.c:1400:9
shift exponent -335544310 is negative
CPU: 0 UID: 0 PID: 5822 Comm: syz-executor130 Not tainted 6.14.0-rc5-syzkaller #0
Hardware name: Google Compute Engine/Google Compute Engine, BIOS Google 02/12/2025
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120
ubsan_epilogue lib/ubsan.c:231 [inline]
__ubsan_handle_shift_out_of_bounds+0x3c8/0x420 lib/ubsan.c:468
dbAllocAG+0x1087/0x10b0 fs/jfs/jfs_dmap.c:1400
dbDiscardAG+0x352/0xa20 fs/jfs/jfs_dmap.c:1613
jfs_ioc_trim+0x45a/0x6b0 fs/jfs/jfs_discard.c:105
jfs_ioctl+0x2cd/0x3e0 fs/jfs/ioctl.c:131
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:906 [inline]
__se_sys_ioctl+0xf5/0x170 fs/ioctl.c:892
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Cc: stable@vger.kernel.org
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: syzbot+fe8264911355151c487f@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=fe8264911355151c487f
Signed-off-by: Vasiliy Kovalev <kovalev@altlinux.org>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0d250b1c52484d489e31df2cf9118b7c4bd49d31 ]
Sanity checks have been added to dbMount as individual if clauses with
identical error handling. Move these all into one clause.
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Stable-dep-of: 37bfb464ddca ("jfs: validate AG parameters in dbMount() to prevent crashes")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 547e836661554dcfa15c212a3821664e85b4191a ]
[BUG]
There is syzbot based reproducer that can crash the kernel, with the
following call trace: (With some debug output added)
DEBUG: rescue=ibadroots parsed
BTRFS: device fsid 14d642db-7b15-43e4-81e6-4b8fac6a25f8 devid 1 transid 8 /dev/loop0 (7:0) scanned by repro (1010)
BTRFS info (device loop0): first mount of filesystem 14d642db-7b15-43e4-81e6-4b8fac6a25f8
BTRFS info (device loop0): using blake2b (blake2b-256-generic) checksum algorithm
BTRFS info (device loop0): using free-space-tree
BTRFS warning (device loop0): checksum verify failed on logical 5312512 mirror 1 wanted 0xb043382657aede36608fd3386d6b001692ff406164733d94e2d9a180412c6003 found 0x810ceb2bacb7f0f9eb2bf3b2b15c02af867cb35ad450898169f3b1f0bd818651 level 0
DEBUG: read tree root path failed for tree csum, ret=-5
BTRFS warning (device loop0): checksum verify failed on logical 5328896 mirror 1 wanted 0x51be4e8b303da58e6340226815b70e3a93592dac3f30dd510c7517454de8567a found 0x51be4e8b303da58e634022a315b70e3a93592dac3f30dd510c7517454de8567a level 0
BTRFS warning (device loop0): checksum verify failed on logical 5292032 mirror 1 wanted 0x1924ccd683be9efc2fa98582ef58760e3848e9043db8649ee382681e220cdee4 found 0x0cb6184f6e8799d9f8cb335dccd1d1832da1071d12290dab3b85b587ecacca6e level 0
process 'repro' launched './file2' with NULL argv: empty string added
DEBUG: no csum root, idatacsums=0 ibadroots=134217728
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000041: 0000 [#1] SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000208-0x000000000000020f]
CPU: 5 UID: 0 PID: 1010 Comm: repro Tainted: G OE 6.15.0-custom+ #249 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS unknown 02/02/2022
RIP: 0010:btrfs_lookup_csum+0x93/0x3d0 [btrfs]
Call Trace:
<TASK>
btrfs_lookup_bio_sums+0x47a/0xdf0 [btrfs]
btrfs_submit_bbio+0x43e/0x1a80 [btrfs]
submit_one_bio+0xde/0x160 [btrfs]
btrfs_readahead+0x498/0x6a0 [btrfs]
read_pages+0x1c3/0xb20
page_cache_ra_order+0x4b5/0xc20
filemap_get_pages+0x2d3/0x19e0
filemap_read+0x314/0xde0
__kernel_read+0x35b/0x900
bprm_execve+0x62e/0x1140
do_execveat_common.isra.0+0x3fc/0x520
__x64_sys_execveat+0xdc/0x130
do_syscall_64+0x54/0x1d0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
---[ end trace 0000000000000000 ]---
[CAUSE]
Firstly the fs has a corrupted csum tree root, thus to mount the fs we
have to go "ro,rescue=ibadroots" mount option.
Normally with that mount option, a bad csum tree root should set
BTRFS_FS_STATE_NO_DATA_CSUMS flag, so that any future data read will
ignore csum search.
But in this particular case, we have the following call trace that
caused NULL csum root, but not setting BTRFS_FS_STATE_NO_DATA_CSUMS:
load_global_roots_objectid():
ret = btrfs_search_slot();
/* Succeeded */
btrfs_item_key_to_cpu()
found = true;
/* We found the root item for csum tree. */
root = read_tree_root_path();
if (IS_ERR(root)) {
if (!btrfs_test_opt(fs_info, IGNOREBADROOTS))
/*
* Since we have rescue=ibadroots mount option,
* @ret is still 0.
*/
break;
if (!found || ret) {
/* @found is true, @ret is 0, error handling for csum
* tree is skipped.
*/
}
This means we completely skipped to set BTRFS_FS_STATE_NO_DATA_CSUMS if
the csum tree is corrupted, which results unexpected later csum lookup.
[FIX]
If read_tree_root_path() failed, always populate @ret to the error
number.
As at the end of the function, we need @ret to determine if we need to
do the extra error handling for csum tree.
Fixes: abed4aaae4f7 ("btrfs: track the csum, extent, and free space trees in a rb tree")
Reported-by: Zhiyu Zhang <zhiyuzhang999@gmail.com>
Reported-by: Longxing Li <coregee2000@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8a39f1c870e9d6fbac5638f3a42a6a6363829c49 ]
In ovl_path_type() and ovl_is_metacopy_dentry() GCC notices that it is
possible for OVL_E() to return NULL (which implies that d_inode(dentry)
may be NULL). This would result in out of bounds reads via container_of(),
seen with GCC 15's -Warray-bounds -fdiagnostics-details. For example:
In file included from arch/x86/include/generated/asm/rwonce.h:1,
from include/linux/compiler.h:339,
from include/linux/export.h:5,
from include/linux/linkage.h:7,
from include/linux/fs.h:5,
from fs/overlayfs/util.c:7:
In function 'ovl_upperdentry_dereference',
inlined from 'ovl_dentry_upper' at ../fs/overlayfs/util.c:305:9,
inlined from 'ovl_path_type' at ../fs/overlayfs/util.c:216:6:
include/asm-generic/rwonce.h:44:26: error: array subscript 0 is outside array bounds of 'struct inode[7486503276667837]' [-Werror=array-bounds=]
44 | #define __READ_ONCE(x) (*(const volatile __unqual_scalar_typeof(x) *)&(x))
| ~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
include/asm-generic/rwonce.h:50:9: note: in expansion of macro '__READ_ONCE'
50 | __READ_ONCE(x); \
| ^~~~~~~~~~~
fs/overlayfs/ovl_entry.h:195:16: note: in expansion of macro 'READ_ONCE'
195 | return READ_ONCE(oi->__upperdentry);
| ^~~~~~~~~
'ovl_path_type': event 1
185 | return inode ? OVL_I(inode)->oe : NULL;
'ovl_path_type': event 2
Avoid this by allowing ovl_dentry_upper() to return NULL if d_inode() is
NULL, as that means the problematic dereferencing can never be reached.
Note that this fixes the over-eager compiler warning in an effort to
being able to enable -Warray-bounds globally. There is no known
behavioral bug here.
Suggested-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0abd87942e0c93964e93224836944712feba1d91 ]
In 'ceph_zero_objects', promote 'object_size' to 'u64' to avoid possible
integer overflow.
Compile tested only.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Dmitry Kandybka <d.kandybka@gmail.com>
Reviewed-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
extension
[ Upstream commit dc3e0f17f74558e8a2fce00608855f050de10230 ]
If client send SMB2_CREATE_POSIX_CONTEXT to ksmbd, Allow a filename
to contain special characters.
Reported-by: Philipp Kerling <pkerling@casix.org>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6e9a2f8dbe93c8004c2af2c0158888628b7ca034 ]
The nfs inodes for referral anchors that have not yet been followed have
their filehandles zeroed out.
Attempting to call getxattr() on one of these will cause the nfs client
to send a GETATTR to the nfs server with the preceding PUTFH sans
filehandle. The server will reply NFS4ERR_NOFILEHANDLE, leading to -EIO
being returned to the application.
For example:
$ strace -e trace=getxattr getfattr -n system.nfs4_acl /mnt/t/ref
getxattr("/mnt/t/ref", "system.nfs4_acl", NULL, 0) = -1 EIO (Input/output error)
/mnt/t/ref: system.nfs4_acl: Input/output error
+++ exited with 1 +++
Have the xattr handlers return -ENODATA instead.
Signed-off-by: Scott Mayhew <smayhew@redhat.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 243fea134633ba3d64aceb4c16129c59541ea2c6 ]
Currently, when NFS is queried for all the labels present on the
file via a command example "getfattr -d -m . /mnt/testfile", it
does not return the security label. Yet when asked specifically for
the label (getfattr -n security.selinux) it will be returned.
Include the security label when all attributes are queried.
Signed-off-by: Olga Kornievskaia <okorniev@redhat.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3a3065352f73381d3a1aa0ccab44aec3a5a9b365 ]
fattr4_numlinks is a recommended attribute, so the client should emulate
it even if the server doesn't support it. In decode_attr_nlink function
in nfs4xdr.c, nlink is initialized to 1. However, this default value
isn't set to the inode due to the check in nfs_fhget.
So if the server doesn't support numlinks, inode's nlink will be zero,
the mount will fail with error "Stale file handle". Set the nlink to 1
if the server doesn't support it.
Signed-off-by: Han Young <hanyang.tony@bytedance.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a3e771afbb3bce91c8296828304903e7348003fe ]
For TRANS2 QUERY_PATH_INFO request when the path does not exist, the
Windows NT SMB server returns error response STATUS_OBJECT_NAME_NOT_FOUND
or ERRDOS/ERRbadfile without the SMBFLG_RESPONSE flag set. Similarly it
returns STATUS_DELETE_PENDING when the file is being deleted. And looks
like that any error response from TRANS2 QUERY_PATH_INFO does not have
SMBFLG_RESPONSE flag set.
So relax check in check_smb_hdr() for detecting if the packet is response
for this special case.
This change fixes stat() operation against Windows NT SMB servers and also
all operations which depends on -ENOENT result from stat like creat() or
mkdir().
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 89381c72d52094988e11d23ef24a00066a0fa458 ]
[MS-CIFS] specification in section 2.2.4.53.1 where is described
SMB_COM_SESSION_SETUP_ANDX Request, for SessionKey field says:
The client MUST set this field to be equal to the SessionKey field in
the SMB_COM_NEGOTIATE Response for this SMB connection.
Linux SMB client currently set this field to zero. This is working fine
against Windows NT SMB servers thanks to [MS-CIFS] product behavior <94>:
Windows NT Server ignores the client's SessionKey.
For compatibility with [MS-CIFS], set this SessionKey field in Session
Setup Request to value retrieved from Negotiate response.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 34331d7beed7576acfc98e991c39738b96162499 upstream.
after fabc4ed200f9, server_unresponsive add a condition to check whether client
need to reconnect depending on server->lstrp. When client failed to reconnect
for some time and abort connection, server->lstrp is updated for the last time.
In the following scene, server->lstrp is too old. This cause next command
failure in re-negotiation rather than waiting for re-negotiation done.
1. mount -t cifs -o username=Everyone,echo_internal=10 //$server_ip/export /mnt
2. ssh $server_ip "echo b > /proc/sysrq-trigger &"
3. ls /mnt
4. sleep 21s
5. ssh $server_ip "service firewalld stop"
6. ls # return EHOSTDOWN
If the interval between 5 and 6 is too small, 6 may trigger sending negotiation
request. Before backgrounding cifsd thread try to receive negotiation response
from server in cifs_readv_from_socket, server_unresponsive may trigger
cifs_reconnect which cause 6 to be failed:
ls thread
----------------
smb2_negotiate
server->tcpStatus = CifsInNegotiate
compound_send_recv
wait_for_compound_request
cifsd thread
----------------
cifs_readv_from_socket
server_unresponsive
server->tcpStatus == CifsInNegotiate && jiffies > server->lstrp + 20s
cifs_reconnect
cifs_abort_connection: mid_state = MID_RETRY_NEEDED
ls thread
----------------
cifs_sync_mid_result return EAGAIN
smb2_negotiate return EHOSTDOWN
Though server->lstrp means last server response time, it is updated in
cifs_abort_connection and cifs_get_tcp_session. We can also update server->lstrp
before switching into CifsInNegotiate state to avoid failure in 6.
Fixes: 7ccc1465465d ("smb: client: fix hang in wait_for_response() for negproto")
Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Acked-by: Meetakshi Setiya <msetiya@microsoft.com>
Signed-off-by: zhangjian <zhangjian496@huawei.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7ac5b66acafcc9292fb935d7e03790f2b8b2dc0e upstream.
If client set ->PreviousSessionId on kerberos session setup stage,
NULL pointer dereference error will happen. Since sess->user is not
set yet, It can pass the user argument as NULL to destroy_previous_session.
sess->user will be set in ksmbd_krb5_authenticate(). So this patch move
calling destroy_previous_session() after ksmbd_krb5_authenticate().
Cc: stable@vger.kernel.org
Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-27391
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 72dd7961a4bb4fa1fc456169a61dd12e68e50645 upstream.
Currently, cached directory contents were not reused across subsequent
'ls' operations because the cache validity check relied on comparing
the ctx pointer, which changes with each readdir invocation. As a
result, the cached dir entries was not marked as valid and the cache was
not utilized for subsequent 'ls' operations.
This change uses the file pointer, which remains consistent across all
readdir calls for a given directory instance, to associate and validate
the cache. As a result, cached directory contents can now be
correctly reused, improving performance for repeated directory listings.
Performance gains with local windows SMB server:
Without the patch and default actimeo=1:
1000 directory enumeration operations on dir with 10k files took 135.0s
With this patch and actimeo=0:
1000 directory enumeration operations on dir with 10k files took just 5.1s
Signed-off-by: Bharath SM <bharathsm@microsoft.com>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2b6d96503255a3ed676cd70f8368870c6d6a25c6 upstream.
Fuzzing hit another invalid pointer dereference due to the lack of
checking whether jffs2_prealloc_raw_node_refs() completed successfully.
Subsequent logic implies that the node refs have been allocated.
Handle that. The code is ready for propagating the error upwards.
KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
CPU: 1 PID: 5835 Comm: syz-executor145 Not tainted 5.10.234-syzkaller #0
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014
RIP: 0010:jffs2_link_node_ref+0xac/0x690 fs/jffs2/nodelist.c:600
Call Trace:
jffs2_mark_erased_block fs/jffs2/erase.c:460 [inline]
jffs2_erase_pending_blocks+0x688/0x1860 fs/jffs2/erase.c:118
jffs2_garbage_collect_pass+0x638/0x1a00 fs/jffs2/gc.c:253
jffs2_reserve_space+0x3f4/0xad0 fs/jffs2/nodemgmt.c:167
jffs2_write_inode_range+0x246/0xb50 fs/jffs2/write.c:362
jffs2_write_end+0x712/0x1110 fs/jffs2/file.c:302
generic_perform_write+0x2c2/0x500 mm/filemap.c:3347
__generic_file_write_iter+0x252/0x610 mm/filemap.c:3465
generic_file_write_iter+0xdb/0x230 mm/filemap.c:3497
call_write_iter include/linux/fs.h:2039 [inline]
do_iter_readv_writev+0x46d/0x750 fs/read_write.c:740
do_iter_write+0x18c/0x710 fs/read_write.c:866
vfs_writev+0x1db/0x6a0 fs/read_write.c:939
do_pwritev fs/read_write.c:1036 [inline]
__do_sys_pwritev fs/read_write.c:1083 [inline]
__se_sys_pwritev fs/read_write.c:1078 [inline]
__x64_sys_pwritev+0x235/0x310 fs/read_write.c:1078
do_syscall_64+0x30/0x40 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x67/0xd1
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Fixes: 2f785402f39b ("[JFFS2] Reduce visibility of raw_node_ref to upper layers of JFFS2 code.")
Fixes: f560928baa60 ("[JFFS2] Allocate node_ref for wasted space when skipping to page boundary")
Cc: stable@vger.kernel.org
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ec9e6f22bce433b260ea226de127ec68042849b0 upstream.
Syzkaller detected a kernel bug in jffs2_link_node_ref, caused by fault
injection in jffs2_prealloc_raw_node_refs. jffs2_sum_write_sumnode doesn't
check return value of jffs2_prealloc_raw_node_refs and simply lets any
error propagate into jffs2_sum_write_data, which eventually calls
jffs2_link_node_ref in order to link the summary to an expectedly allocated
node.
kernel BUG at fs/jffs2/nodelist.c:592!
invalid opcode: 0000 [#1] PREEMPT SMP KASAN NOPTI
CPU: 1 PID: 31277 Comm: syz-executor.7 Not tainted 6.1.128-syzkaller-00139-ge10f83ca10a1 #0
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014
RIP: 0010:jffs2_link_node_ref+0x570/0x690 fs/jffs2/nodelist.c:592
Call Trace:
<TASK>
jffs2_sum_write_data fs/jffs2/summary.c:841 [inline]
jffs2_sum_write_sumnode+0xd1a/0x1da0 fs/jffs2/summary.c:874
jffs2_do_reserve_space+0xa18/0xd60 fs/jffs2/nodemgmt.c:388
jffs2_reserve_space+0x55f/0xaa0 fs/jffs2/nodemgmt.c:197
jffs2_write_inode_range+0x246/0xb50 fs/jffs2/write.c:362
jffs2_write_end+0x726/0x15d0 fs/jffs2/file.c:301
generic_perform_write+0x314/0x5d0 mm/filemap.c:3856
__generic_file_write_iter+0x2ae/0x4d0 mm/filemap.c:3973
generic_file_write_iter+0xe3/0x350 mm/filemap.c:4005
call_write_iter include/linux/fs.h:2265 [inline]
do_iter_readv_writev+0x20f/0x3c0 fs/read_write.c:735
do_iter_write+0x186/0x710 fs/read_write.c:861
vfs_iter_write+0x70/0xa0 fs/read_write.c:902
iter_file_splice_write+0x73b/0xc90 fs/splice.c:685
do_splice_from fs/splice.c:763 [inline]
direct_splice_actor+0x10c/0x170 fs/splice.c:950
splice_direct_to_actor+0x337/0xa10 fs/splice.c:896
do_splice_direct+0x1a9/0x280 fs/splice.c:1002
do_sendfile+0xb13/0x12c0 fs/read_write.c:1255
__do_sys_sendfile64 fs/read_write.c:1323 [inline]
__se_sys_sendfile64 fs/read_write.c:1309 [inline]
__x64_sys_sendfile64+0x1cf/0x210 fs/read_write.c:1309
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x35/0x80 arch/x86/entry/common.c:81
entry_SYSCALL_64_after_hwframe+0x6e/0xd8
Fix this issue by checking return value of jffs2_prealloc_raw_node_refs
before calling jffs2_sum_write_data.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Cc: stable@vger.kernel.org
Fixes: 2f785402f39b ("[JFFS2] Reduce visibility of raw_node_ref to upper layers of JFFS2 code.")
Signed-off-by: Artem Sadovnikov <a.sadovnikov@ispras.ru>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1f396b9bfe39aaf55ea74a7005806164b236653d upstream.
cifs_reconnect can be called with a flag to mark the session as needing
reconnect too. When this is done, we expect the connections of all
channels to be reconnected too, which is not happening today.
Without doing this, we have seen bad things happen when primary and
secondary channels are connected to different servers (in case of cloud
services like Azure Files SMB).
This change would force all connections to reconnect as well, not just
the sessions and tcons.
Cc: <stable@vger.kernel.org>
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5db0d252c64e91ba1929c70112352e85dc5751e7 upstream.
w/ below testcase, resize will generate a corrupted image which
contains inconsistent metadata, so when mounting such image, it
will trigger kernel panic:
touch img
truncate -s $((512*1024*1024*1024)) img
mkfs.f2fs -f img $((256*1024*1024))
resize.f2fs -s -i img -t $((1024*1024*1024))
mount img /mnt/f2fs
------------[ cut here ]------------
kernel BUG at fs/f2fs/segment.h:863!
Oops: invalid opcode: 0000 [#1] SMP PTI
CPU: 11 UID: 0 PID: 3922 Comm: mount Not tainted 6.15.0-rc1+ #191 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
RIP: 0010:f2fs_ra_meta_pages+0x47c/0x490
Call Trace:
f2fs_build_segment_manager+0x11c3/0x2600
f2fs_fill_super+0xe97/0x2840
mount_bdev+0xf4/0x140
legacy_get_tree+0x2b/0x50
vfs_get_tree+0x29/0xd0
path_mount+0x487/0xaf0
__x64_sys_mount+0x116/0x150
do_syscall_64+0x82/0x190
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7fdbfde1bcfe
The reaseon is:
sit_i->bitmap_size is 192, so size of sit bitmap is 192*8=1536, at maximum
there are 1536 sit blocks, however MAIN_S |
