summaryrefslogtreecommitdiff
path: root/include/linux
AgeCommit message (Collapse)AuthorFilesLines
2022-04-08coredump: Use the vma snapshot in fill_files_noteEric W. Biederman1-0/+2
commit 390031c942116d4733310f0684beb8db19885fe6 upstream. Matthew Wilcox reported that there is a missing mmap_lock in file_files_note that could possibly lead to a user after free. Solve this by using the existing vma snapshot for consistency and to avoid the need to take the mmap_lock anywhere in the coredump code except for dump_vma_snapshot. Update the dump_vma_snapshot to capture vm_pgoff and vm_file that are neeeded by fill_files_note. Add free_vma_snapshot to free the captured values of vm_file. Reported-by: Matthew Wilcox <willy@infradead.org> Link: https://lkml.kernel.org/r/20220131153740.2396974-1-willy@infradead.org Cc: stable@vger.kernel.org Fixes: a07279c9a8cd ("binfmt_elf, binfmt_elf_fdpic: use a VMA list snapshot") Fixes: 2aa362c49c31 ("coredump: extend core dump note section to contain file names of mapped files") Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-08coredump: Snapshot the vmas in do_coredumpEric W. Biederman2-3/+3
commit 95c5436a4883841588dae86fb0b9325f47ba5ad3 upstream. Move the call of dump_vma_snapshot and kvfree(vma_meta) out of the individual coredump routines into do_coredump itself. This makes the code less error prone and easier to maintain. Make the vma snapshot available to the coredump routines in struct coredump_params. This makes it easier to change and update what is captures in the vma snapshot and will be needed for fixing fill_file_notes. Reviewed-by: Jann Horn <jannh@google.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-08swiotlb: Support aligned swiotlb buffersDavid Stevens1-1/+2
commit e81e99bacc9f9347bda7808a949c1ce9fcc2bbf4 upstream. Add an argument to swiotlb_tbl_map_single that specifies the desired alignment of the allocated buffer. This is used by dma-iommu to ensure the buffer is aligned to the iova granule size when using swiotlb with untrusted sub-granule mappings. This addresses an issue where adjacent slots could be exposed to the untrusted device if IO_TLB_SIZE < iova granule < PAGE_SIZE. Signed-off-by: David Stevens <stevensd@chromium.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20210929023300.335969-7-stevensd@google.com Signed-off-by: Joerg Roedel <jroedel@suse.de> Cc: Mario Limonciello <Mario.Limonciello@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-08net: preserve skb_end_offset() in skb_unclone_keeptruesize()Eric Dumazet1-9/+9
commit 2b88cba55883eaafbc9b7cbff0b2c7cdba71ed01 upstream. syzbot found another way to trigger the infamous WARN_ON_ONCE(delta < len) in skb_try_coalesce() [1] I was able to root cause the issue to kfence. When kfence is in action, the following assertion is no longer true: int size = xxxx; void *ptr1 = kmalloc(size, gfp); void *ptr2 = kmalloc(size, gfp); if (ptr1 && ptr2) ASSERT(ksize(ptr1) == ksize(ptr2)); We attempted to fix these issues in the blamed commits, but forgot that TCP was possibly shifting data after skb_unclone_keeptruesize() has been used, notably from tcp_retrans_try_collapse(). So we not only need to keep same skb->truesize value, we also need to make sure TCP wont fill new tailroom that pskb_expand_head() was able to get from a addr = kmalloc(...) followed by ksize(addr) Split skb_unclone_keeptruesize() into two parts: 1) Inline skb_unclone_keeptruesize() for the common case, when skb is not cloned. 2) Out of line __skb_unclone_keeptruesize() for the 'slow path'. WARNING: CPU: 1 PID: 6490 at net/core/skbuff.c:5295 skb_try_coalesce+0x1235/0x1560 net/core/skbuff.c:5295 Modules linked in: CPU: 1 PID: 6490 Comm: syz-executor161 Not tainted 5.17.0-rc4-syzkaller-00229-g4f12b742eb2b #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:skb_try_coalesce+0x1235/0x1560 net/core/skbuff.c:5295 Code: bf 01 00 00 00 0f b7 c0 89 c6 89 44 24 20 e8 62 24 4e fa 8b 44 24 20 83 e8 01 0f 85 e5 f0 ff ff e9 87 f4 ff ff e8 cb 20 4e fa <0f> 0b e9 06 f9 ff ff e8 af b2 95 fa e9 69 f0 ff ff e8 95 b2 95 fa RSP: 0018:ffffc900063af268 EFLAGS: 00010293 RAX: 0000000000000000 RBX: 00000000ffffffd5 RCX: 0000000000000000 RDX: ffff88806fc05700 RSI: ffffffff872abd55 RDI: 0000000000000003 RBP: ffff88806e675500 R08: 00000000ffffffd5 R09: 0000000000000000 R10: ffffffff872ab659 R11: 0000000000000000 R12: ffff88806dd554e8 R13: ffff88806dd9bac0 R14: ffff88806dd9a2c0 R15: 0000000000000155 FS: 00007f18014f9700(0000) GS:ffff8880b9c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020002000 CR3: 000000006be7a000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> tcp_try_coalesce net/ipv4/tcp_input.c:4651 [inline] tcp_try_coalesce+0x393/0x920 net/ipv4/tcp_input.c:4630 tcp_queue_rcv+0x8a/0x6e0 net/ipv4/tcp_input.c:4914 tcp_data_queue+0x11fd/0x4bb0 net/ipv4/tcp_input.c:5025 tcp_rcv_established+0x81e/0x1ff0 net/ipv4/tcp_input.c:5947 tcp_v4_do_rcv+0x65e/0x980 net/ipv4/tcp_ipv4.c:1719 sk_backlog_rcv include/net/sock.h:1037 [inline] __release_sock+0x134/0x3b0 net/core/sock.c:2779 release_sock+0x54/0x1b0 net/core/sock.c:3311 sk_wait_data+0x177/0x450 net/core/sock.c:2821 tcp_recvmsg_locked+0xe28/0x1fd0 net/ipv4/tcp.c:2457 tcp_recvmsg+0x137/0x610 net/ipv4/tcp.c:2572 inet_recvmsg+0x11b/0x5e0 net/ipv4/af_inet.c:850 sock_recvmsg_nosec net/socket.c:948 [inline] sock_recvmsg net/socket.c:966 [inline] sock_recvmsg net/socket.c:962 [inline] ____sys_recvmsg+0x2c4/0x600 net/socket.c:2632 ___sys_recvmsg+0x127/0x200 net/socket.c:2674 __sys_recvmsg+0xe2/0x1a0 net/socket.c:2704 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae Fixes: c4777efa751d ("net: add and use skb_unclone_keeptruesize() helper") Fixes: 097b9146c0e2 ("net: fix up truesize of cloned skb in skb_prepare_for_shift()") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Marco Elver <elver@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-08net: add skb_set_end_offset() helperEric Dumazet1-0/+10
commit 763087dab97547230a6807c865a6a5ae53a59247 upstream. We have multiple places where this helper is convenient, and plan using it in the following patch. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-08Reinstate some of "swiotlb: rework "fix info leak with DMA_FROM_DEVICE""Linus Torvalds1-8/+0
commit 901c7280ca0d5e2b4a8929fbe0bfb007ac2a6544 upstream. Halil Pasic points out [1] that the full revert of that commit (revert in bddac7c1e02b), and that a partial revert that only reverts the problematic case, but still keeps some of the cleanups is probably better.  And that partial revert [2] had already been verified by Oleksandr Natalenko to also fix the issue, I had just missed that in the long discussion. So let's reinstate the cleanups from commit aa6f8dcbab47 ("swiotlb: rework "fix info leak with DMA_FROM_DEVICE""), and effectively only revert the part that caused problems. Link: https://lore.kernel.org/all/20220328013731.017ae3e3.pasic@linux.ibm.com/ [1] Link: https://lore.kernel.org/all/20220324055732.GB12078@lst.de/ [2] Link: https://lore.kernel.org/all/4386660.LvFx2qVVIh@natalenko.name/ [3] Suggested-by: Halil Pasic <pasic@linux.ibm.com> Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-08nvme: allow duplicate NSIDs for private namespacesSungup Moon1-0/+1
commit 5974ea7ce0f9a5987fc8cf5e08ad6e3e70bb542e upstream. A NVMe subsystem with multiple controller can have private namespaces that use the same NSID under some conditions: "If Namespace Management, ANA Reporting, or NVM Sets are supported, the NSIDs shall be unique within the NVM subsystem. If the Namespace Management, ANA Reporting, and NVM Sets are not supported, then NSIDs: a) for shared namespace shall be unique; and b) for private namespace are not required to be unique." Reference: Section 6.1.6 NSID and Namespace Usage; NVM Express 1.4c spec. Make sure this specific setup is supported in Linux. Fixes: 9ad1927a3bc2 ("nvme: always search for namespace head") Signed-off-by: Sungup Moon <sungup.moon@samsung.com> [hch: refactored and fixed the controller vs subsystem based naming conflict] Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-08sched/tracing: Report TASK_RTLOCK_WAIT tasks as TASK_UNINTERRUPTIBLEValentin Schneider1-0/+8
[ Upstream commit 25795ef6299f07ce3838f3253a9cb34f64efcfae ] TASK_RTLOCK_WAIT currently isn't part of TASK_REPORT, thus a task blocking on an rtlock will appear as having a task state == 0, IOW TASK_RUNNING. The actual state is saved in p->saved_state, but reading it after reading p->__state has a few issues: o that could still be TASK_RUNNING in the case of e.g. rt_spin_lock o ttwu_state_match() might have changed that to TASK_RUNNING As pointed out by Eric, adding TASK_RTLOCK_WAIT to TASK_REPORT implies exposing a new state to userspace tools which way not know what to do with them. The only information that needs to be conveyed here is that a task is waiting on an rt_mutex, which matches TASK_UNINTERRUPTIBLE - there's no need for a new state. Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Valentin Schneider <valentin.schneider@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org> Link: https://lore.kernel.org/r/20220120162520.570782-3-valentin.schneider@arm.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-08atomics: Fix atomic64_{read_acquire,set_release} fallbacksMark Rutland1-5/+33
[ Upstream commit dc1b4df09acdca7a89806b28f235cd6d8dcd3d24 ] Arnd reports that on 32-bit architectures, the fallbacks for atomic64_read_acquire() and atomic64_set_release() are broken as they use smp_load_acquire() and smp_store_release() respectively, which do not work on types larger than the native word size. Since those contain compiletime_assert_atomic_type(), any attempt to use those fallbacks will result in a build-time error. e.g. with the following added to arch/arm/kernel/setup.c: | void test_atomic64(atomic64_t *v) | { | atomic64_set_release(v, 5); | atomic64_read_acquire(v); | } The compiler will complain as follows: | In file included from <command-line>: | In function 'arch_atomic64_set_release', | inlined from 'test_atomic64' at ./include/linux/atomic/atomic-instrumented.h:669:2: | ././include/linux/compiler_types.h:346:38: error: call to '__compiletime_assert_9' declared with attribute error: Need native word sized stores/loads for atomicity. | 346 | _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__) | | ^ | ././include/linux/compiler_types.h:327:4: note: in definition of macro '__compiletime_assert' | 327 | prefix ## suffix(); \ | | ^~~~~~ | ././include/linux/compiler_types.h:346:2: note: in expansion of macro '_compiletime_assert' | 346 | _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__) | | ^~~~~~~~~~~~~~~~~~~ | ././include/linux/compiler_types.h:349:2: note: in expansion of macro 'compiletime_assert' | 349 | compiletime_assert(__native_word(t), \ | | ^~~~~~~~~~~~~~~~~~ | ./include/asm-generic/barrier.h:133:2: note: in expansion of macro 'compiletime_assert_atomic_type' | 133 | compiletime_assert_atomic_type(*p); \ | | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ | ./include/asm-generic/barrier.h:164:55: note: in expansion of macro '__smp_store_release' | 164 | #define smp_store_release(p, v) do { kcsan_release(); __smp_store_release(p, v); } while (0) | | ^~~~~~~~~~~~~~~~~~~ | ./include/linux/atomic/atomic-arch-fallback.h:1270:2: note: in expansion of macro 'smp_store_release' | 1270 | smp_store_release(&(v)->counter, i); | | ^~~~~~~~~~~~~~~~~ | make[2]: *** [scripts/Makefile.build:288: arch/arm/kernel/setup.o] Error 1 | make[1]: *** [scripts/Makefile.build:550: arch/arm/kernel] Error 2 | make: *** [Makefile:1831: arch/arm] Error 2 Fix this by only using smp_load_acquire() and smp_store_release() for native atomic types, and otherwise falling back to the regular barriers necessary for acquire/release semantics, as we do in the more generic acquire and release fallbacks. Since the fallback templates are used to generate the atomic64_*() and atomic_*() operations, the __native_word() check is added to both. For the atomic_*() operations, which are always 32-bit, the __native_word() check is redundant but not harmful, as it is always true. For the example above this works as expected on 32-bit, e.g. for arm multi_v7_defconfig: | <test_atomic64>: | push {r4, r5} | dmb ish | pldw [r0] | mov r2, #5 | mov r3, #0 | ldrexd r4, [r0] | strexd r4, r2, [r0] | teq r4, #0 | bne 484 <test_atomic64+0x14> | ldrexd r2, [r0] | dmb ish | pop {r4, r5} | bx lr ... and also on 64-bit, e.g. for arm64 defconfig: | <test_atomic64>: | bti c | paciasp | mov x1, #0x5 | stlr x1, [x0] | ldar x0, [x0] | autiasp | ret Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Ard Biesheuvel <ardb@kernel.org> Reviewed-by: Boqun Feng <boqun.feng@gmail.com> Link: https://lore.kernel.org/r/20220207101943.439825-1-mark.rutland@arm.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-08serial: 8250: fix XOFF/XON sending when DMA is usedIlpo Järvinen1-0/+2
[ Upstream commit f58c252e30cf74f68b0054293adc03b5923b9f0e ] When 8250 UART is using DMA, x_char (XON/XOFF) is never sent to the wire. After this change, x_char is injected correctly. Create uart_xchar_out() helper for sending the x_char out and accounting related to it. It seems that almost every driver does these same steps with x_char. Except for 8250, however, almost all currently lack .serial_out so they cannot immediately take advantage of this new helper. The downside of this patch is that it might reintroduce the problems some devices faced with mixed DMA/non-DMA transfer which caused revert f967fc8f165f (Revert "serial: 8250_dma: don't bother DMA with small transfers"). However, the impact should be limited to cases with XON/XOFF (that didn't work with DMA capable devices to begin with so this problem is not very likely to cause a major issue, if any at all). Fixes: 9ee4b83e51f74 ("serial: 8250: Add support for dmaengine") Reported-by: Gilles Buloz <gilles.buloz@kontron.com> Tested-by: Gilles Buloz <gilles.buloz@kontron.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220314091432.4288-2-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-08bpf, sockmap: Fix memleak in sk_psock_queue_msgWang Yufen1-9/+4
[ Upstream commit 938d3480b92fa5e454b7734294f12a7b75126f09 ] If tcp_bpf_sendmsg is running during a tear down operation we may enqueue data on the ingress msg queue while tear down is trying to free it. sk1 (redirect sk2) sk2 ------------------- --------------- tcp_bpf_sendmsg() tcp_bpf_send_verdict() tcp_bpf_sendmsg_redir() bpf_tcp_ingress() sock_map_close() lock_sock() lock_sock() ... blocking sk_psock_stop sk_psock_clear_state(psock, SK_PSOCK_TX_ENABLED); release_sock(sk); lock_sock() sk_mem_charge() get_page() sk_psock_queue_msg() sk_psock_test_state(psock, SK_PSOCK_TX_ENABLED); drop_sk_msg() release_sock() While drop_sk_msg(), the msg has charged memory form sk by sk_mem_charge and has sg pages need to put. To fix we use sk_msg_free() and then kfee() msg. This issue can cause the following info: WARNING: CPU: 0 PID: 9202 at net/core/stream.c:205 sk_stream_kill_queues+0xc8/0xe0 Call Trace: <IRQ> inet_csk_destroy_sock+0x55/0x110 tcp_rcv_state_process+0xe5f/0xe90 ? sk_filter_trim_cap+0x10d/0x230 ? tcp_v4_do_rcv+0x161/0x250 tcp_v4_do_rcv+0x161/0x250 tcp_v4_rcv+0xc3a/0xce0 ip_protocol_deliver_rcu+0x3d/0x230 ip_local_deliver_finish+0x54/0x60 ip_local_deliver+0xfd/0x110 ? ip_protocol_deliver_rcu+0x230/0x230 ip_rcv+0xd6/0x100 ? ip_local_deliver+0x110/0x110 __netif_receive_skb_one_core+0x85/0xa0 process_backlog+0xa4/0x160 __napi_poll+0x29/0x1b0 net_rx_action+0x287/0x300 __do_softirq+0xff/0x2fc do_softirq+0x79/0x90 </IRQ> WARNING: CPU: 0 PID: 531 at net/ipv4/af_inet.c:154 inet_sock_destruct+0x175/0x1b0 Call Trace: <TASK> __sk_destruct+0x24/0x1f0 sk_psock_destroy+0x19b/0x1c0 process_one_work+0x1b3/0x3c0 ? process_one_work+0x3c0/0x3c0 worker_thread+0x30/0x350 ? process_one_work+0x3c0/0x3c0 kthread+0xe6/0x110 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x22/0x30 </TASK> Fixes: 9635720b7c88 ("bpf, sockmap: Fix memleak on ingress msg enqueue") Signed-off-by: Wang Yufen <wangyufen@huawei.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20220304081145.2037182-2-wangyufen@huawei.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-08PCI: Reduce warnings on possible RW1C corruptionMark Tomlinson1-0/+1
[ Upstream commit 92c45b63ce22c8898aa41806e8d6692bcd577510 ] For hardware that only supports 32-bit writes to PCI there is the possibility of clearing RW1C (write-one-to-clear) bits. A rate-limited messages was introduced by fb2659230120, but rate-limiting is not the best choice here. Some devices may not show the warnings they should if another device has just produced a bunch of warnings. Also, the number of messages can be a nuisance on devices which are otherwise working fine. Change the ratelimit to a single warning per bus. This ensures no bus is 'starved' of emitting a warning and also that there isn't a continuous stream of warnings. It would be preferable to have a warning per device, but the pci_dev structure is not available here, and a lookup from devfn would be far too slow. Suggested-by: Bjorn Helgaas <helgaas@kernel.org> Fixes: fb2659230120 ("PCI: Warn on possible RW1C corruption for sub-32 bit config writes") Link: https://lore.kernel.org/r/20200806041455.11070-1-mark.tomlinson@alliedtelesis.co.nz Signed-off-by: Mark Tomlinson <mark.tomlinson@alliedtelesis.co.nz> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Scott Branden <scott.branden@broadcom.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-08firmware: ti_sci: Fix compilation failure when CONFIG_TI_SCI_PROTOCOL is not ↵Christophe JAILLET1-1/+1
defined [ Upstream commit 043cfff99a18933fda2fb2e163daee73cc07910b ] Remove an extra ";" which breaks compilation. Fixes: 53bf2b0e4e4c ("firmware: ti_sci: Add support for getting resource with subtype") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Nishanth Menon <nm@ti.com> Link: https://lore.kernel.org/r/e6c3cb793e1a6a2a0ae2528d5a5650dfe6a4b6ff.1640276505.git.christophe.jaillet@wanadoo.fr Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-08stack: Constrain and fix stack offset randomization with Clang buildsMarco Elver1-2/+14
[ Upstream commit efa90c11f62e6b7252fb75efe2787056872a627c ] All supported versions of Clang perform auto-init of __builtin_alloca() when stack auto-init is on (CONFIG_INIT_STACK_ALL_{ZERO,PATTERN}). add_random_kstack_offset() uses __builtin_alloca() to add a stack offset. This means, when CONFIG_INIT_STACK_ALL_{ZERO,PATTERN} is enabled, add_random_kstack_offset() will auto-init that unused portion of the stack used to add an offset. There are several problems with this: 1. These offsets can be as large as 1023 bytes. Performing memset() on them isn't exactly cheap, and this is done on every syscall entry. 2. Architectures adding add_random_kstack_offset() to syscall entry implemented in C require them to be 'noinstr' (e.g. see x86 and s390). The potential problem here is that a call to memset may occur, which is not noinstr. A x86_64 defconfig kernel with Clang 11 and CONFIG_VMLINUX_VALIDATION shows: | vmlinux.o: warning: objtool: do_syscall_64()+0x9d: call to memset() leaves .noinstr.text section | vmlinux.o: warning: objtool: do_int80_syscall_32()+0xab: call to memset() leaves .noinstr.text section | vmlinux.o: warning: objtool: __do_fast_syscall_32()+0xe2: call to memset() leaves .noinstr.text section | vmlinux.o: warning: objtool: fixup_bad_iret()+0x2f: call to memset() leaves .noinstr.text section Clang 14 (unreleased) will introduce a way to skip alloca initialization via __builtin_alloca_uninitialized() (https://reviews.llvm.org/D115440). Constrain RANDOMIZE_KSTACK_OFFSET to only be enabled if no stack auto-init is enabled, the compiler is GCC, or Clang is version 14+. Use __builtin_alloca_uninitialized() if the compiler provides it, as is done by Clang 14. Link: https://lkml.kernel.org/r/YbHTKUjEejZCLyhX@elver.google.com Fixes: 39218ff4c625 ("stack: Optionally randomize kernel stack offset each syscall") Signed-off-by: Marco Elver <elver@google.com> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Acked-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20220131090521.1947110-2-elver@google.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-08pstore: Don't use semaphores in always-atomic-context codeJann Horn1-3/+3
commit 8126b1c73108bc691f5643df19071a59a69d0bc6 upstream. pstore_dump() is *always* invoked in atomic context (nowadays in an RCU read-side critical section, before that under a spinlock). It doesn't make sense to try to use semaphores here. This is mostly a revert of commit ea84b580b955 ("pstore: Convert buf_lock to semaphore"), except that two parts aren't restored back exactly as they were: - keep the lock initialization in pstore_register - in efi_pstore_write(), always set the "block" flag to false - omit "is_locked", that was unnecessary since commit 959217c84c27 ("pstore: Actually give up during locking failure") - fix the bailout message The actual problem that the buggy commit was trying to address may have been that the use of preemptible() in efi_pstore_write() was wrong - it only looks at preempt_count() and the state of IRQs, but __rcu_read_lock() doesn't touch either of those under CONFIG_PREEMPT_RCU. (Sidenote: CONFIG_PREEMPT_RCU means that the scheduler can preempt tasks in RCU read-side critical sections, but you're not allowed to actively block/reschedule.) Lockdep probably never caught the problem because it's very rare that you actually hit the contended case, so lockdep always just sees the down_trylock(), not the down_interruptible(), and so it can't tell that there's a problem. Fixes: ea84b580b955 ("pstore: Convert buf_lock to semaphore") Cc: stable@vger.kernel.org Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20220314185953.2068993-1-jannh@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-08fbdev: Hot-unplug firmware fb devices on forced removalThomas Zimmermann1-0/+1
commit 27599aacbaefcbf2af7b06b0029459bbf682000d upstream. Hot-unplug all firmware-framebuffer devices as part of removing them via remove_conflicting_framebuffers() et al. Releases all memory regions to be acquired by native drivers. Firmware, such as EFI, install a framebuffer while posting the computer. After removing the firmware-framebuffer device from fbdev, a native driver takes over the hardware and the firmware framebuffer becomes invalid. Firmware-framebuffer drivers, specifically simplefb, don't release their device from Linux' device hierarchy. It still owns the firmware framebuffer and blocks the native drivers from loading. This has been observed in the vmwgfx driver. [1] Initiating a device removal (i.e., hot unplug) as part of remove_conflicting_framebuffers() removes the underlying device and returns the memory range to the system. [1] https://lore.kernel.org/dri-devel/20220117180359.18114-1-zack@kde.org/ v2: * rename variable 'dev' to 'device' (Javier) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reported-by: Zack Rusin <zackr@vmware.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Zack Rusin <zackr@vmware.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> CC: stable@vger.kernel.org # v5.11+ Link: https://patchwork.freedesktop.org/patch/msgid/20220125091222.21457-2-tzimmermann@suse.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-08block: don't merge across cgroup boundaries if blkcg is enabledTejun Heo1-0/+17
commit 6b2b04590b51aa4cf395fcd185ce439cab5961dc upstream. blk-iocost and iolatency are cgroup aware rq-qos policies but they didn't disable merges across different cgroups. This obviously can lead to accounting and control errors but more importantly to priority inversions - e.g. an IO which belongs to a higher priority cgroup or IO class may end up getting throttled incorrectly because it gets merged to an IO issued from a low priority cgroup. Fix it by adding blk_cgroup_mergeable() which is called from merge paths and rejects cross-cgroup and cross-issue_as_root merges. Signed-off-by: Tejun Heo <tj@kernel.org> Fixes: d70675121546 ("block: introduce blk-iolatency io controller") Cc: stable@vger.kernel.org # v4.19+ Cc: Josef Bacik <jbacik@fb.com> Link: https://lore.kernel.org/r/Yi/eE/6zFNyWJ+qd@slm.duckdns.org Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-08mtd: rawnand: protect access to rawnand devices while in suspendSean Nyekjaer1-0/+2
commit 8cba323437a49a45756d661f500b324fc2d486fe upstream. Prevent rawnand access while in a suspended state. Commit 013e6292aaf5 ("mtd: rawnand: Simplify the locking") allows the rawnand layer to return errors rather than waiting in a blocking wait. Tested on a iMX6ULL. Fixes: 013e6292aaf5 ("mtd: rawnand: Simplify the locking") Signed-off-by: Sean Nyekjaer <sean@geanix.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Cc: stable@vger.kernel.org Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220208085213.1838273-1-sean@geanix.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-08NFSD: prevent integer overflow on 32 bit systemsDan Carpenter1-0/+2
commit 23a9dbbe0faf124fc4c139615633b9d12a3a89ef upstream. On a 32 bit system, the "len * sizeof(*p)" operation can have an integer overflow. Cc: stable@vger.kernel.org Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-08Revert "swiotlb: rework "fix info leak with DMA_FROM_DEVICE""Linus Torvalds1-0/+8
commit bddac7c1e02ba47f0570e494c9289acea3062cc1 upstream. This reverts commit aa6f8dcbab473f3a3c7454b74caa46d36cdc5d13. It turns out this breaks at least the ath9k wireless driver, and possibly others. What the ath9k driver does on packet receive is to set up the DMA transfer with: int ath_rx_init(..) .. bf->bf_buf_addr = dma_map_single(sc->dev, skb->data, common->rx_bufsize, DMA_FROM_DEVICE); and then the receive logic (through ath_rx_tasklet()) will fetch incoming packets static bool ath_edma_get_buffers(..) .. dma_sync_single_for_cpu(sc->dev, bf->bf_buf_addr, common->rx_bufsize, DMA_FROM_DEVICE); ret = ath9k_hw_process_rxdesc_edma(ah, rs, skb->data); if (ret == -EINPROGRESS) { /*let device gain the buffer again*/ dma_sync_single_for_device(sc->dev, bf->bf_buf_addr, common->rx_bufsize, DMA_FROM_DEVICE); return false; } and it's worth noting how that first DMA sync: dma_sync_single_for_cpu(..DMA_FROM_DEVICE); is there to make sure the CPU can read the DMA buffer (possibly by copying it from the bounce buffer area, or by doing some cache flush). The iommu correctly turns that into a "copy from bounce bufer" so that the driver can look at the state of the packets. In the meantime, the device may continue to write to the DMA buffer, but we at least have a snapshot of the state due to that first DMA sync. But that _second_ DMA sync: dma_sync_single_for_device(..DMA_FROM_DEVICE); is telling the DMA mapping that the CPU wasn't interested in the area because the packet wasn't there. In the case of a DMA bounce buffer, that is a no-op. Note how it's not a sync for the CPU (the "for_device()" part), and it's not a sync for data written by the CPU (the "DMA_FROM_DEVICE" part). Or rather, it _should_ be a no-op. That's what commit aa6f8dcbab47 broke: it made the code bounce the buffer unconditionally, and changed the DMA_FROM_DEVICE to just unconditionally and illogically be DMA_TO_DEVICE. [ Side note: purely within the confines of the swiotlb driver it wasn't entirely illogical: The reason it did that odd DMA_FROM_DEVICE -> DMA_TO_DEVICE conversion thing is because inside the swiotlb driver, it uses just a swiotlb_bounce() helper that doesn't care about the whole distinction of who the sync is for - only which direction to bounce. So it took the "sync for device" to mean that the CPU must have been the one writing, and thought it meant DMA_TO_DEVICE. ] Also note how the commentary in that commit was wrong, probably due to that whole confusion, claiming that the commit makes the swiotlb code "bounce unconditionally (that is, also when dir == DMA_TO_DEVICE) in order do avoid synchronising back stale data from the swiotlb buffer" which is nonsensical for two reasons: - that "also when dir == DMA_TO_DEVICE" is nonsensical, as that was exactly when it always did - and should do - the bounce. - since this is a sync for the device (not for the CPU), we're clearly fundamentally not coping back stale data from the bounce buffers at all, because we'd be copying *to* the bounce buffers. So that commit was just very confused. It confused the direction of the synchronization (to the device, not the cpu) with the direction of the DMA (from the device). Reported-and-bisected-by: Oleksandr Natalenko <oleksandr@natalenko.name> Reported-by: Olha Cherevyk <olha.cherevyk@gmail.com> Cc: Halil Pasic <pasic@linux.ibm.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Kalle Valo <kvalo@kernel.org> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Toke Høiland-Jørgensen <toke@toke.dk> Cc: Maxime Bizon <mbizon@freebox.fr> Cc: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-03-23net: handle ARPHRD_PIMREG in dev_is_mac_header_xmit()Nicolas Dichtel1-0/+1
[ Upstream commit 4ee06de7729d795773145692e246a06448b1eb7a ] This kind of interface doesn't have a mac header. This patch fixes bpf_redirect() to a PIM interface. Fixes: 27b29f63058d ("bpf: add bpf_redirect() helper") Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Link: https://lore.kernel.org/r/20220315092008.31423-1-nicolas.dichtel@6wind.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-03-16block: drop unused includes in <linux/genhd.h>Christoph Hellwig2-12/+3
commit b81e0c2372e65e5627864ba034433b64b2fc73f5 upstream. Drop various include not actually used in genhd.h itself, and move the remaning includes closer together. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Link: https://lore.kernel.org/r/20210920123328.1399408-15-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk> Reported-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>a Reported-by: "H. Nikolaus Schaller" <hns@goldelico.com> Reported-by: Guenter Roeck <linux@roeck-us.net> Cc: "Maciej W. Rozycki" <macro@orcam.me.uk> [ resolves MIPS build failure by luck, root cause needs to be fixed in Linus's tree properly, but this is needed for now to fix the build - gregkh ] Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-03-16watch_queue: Fix filter limit checkDavid Howells1-1/+2
commit c993ee0f9f81caf5767a50d1faeba39a0dc82af2 upstream. In watch_queue_set_filter(), there are a couple of places where we check that the filter type value does not exceed what the type_filter bitmap can hold. One place calculates the number of bits by: if (tf[i].type >= sizeof(wfilter->type_filter) * 8) which is fine, but the second does: if (tf[i].type >= sizeof(wfilter->type_filter) * BITS_PER_LONG) which is not. This can lead to a couple of out-of-bounds writes due to a too-large type: (1) __set_bit() on wfilter->type_filter (2) Writing more elements in wfilter->filters[] than we allocated. Fix this by just using the proper WATCH_TYPE__NR instead, which is the number of types we actually know about. The bug may cause an oops looking something like: BUG: KASAN: slab-out-of-bounds in watch_queue_set_filter+0x659/0x740 Write of size 4 at addr ffff88800d2c66bc by task watch_queue_oob/611 ... Call Trace: <TASK> dump_stack_lvl+0x45/0x59 print_address_description.constprop.0+0x1f/0x150 ... kasan_report.cold+0x7f/0x11b ... watch_queue_set_filter+0x659/0x740 ... __x64_sys_ioctl+0x127/0x190 do_syscall_64+0x43/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae Allocated by task 611: kasan_save_stack+0x1e/0x40 __kasan_kmalloc+0x81/0xa0 watch_queue_set_filter+0x23a/0x740 __x64_sys_ioctl+0x127/0x190 do_syscall_64+0x43/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae The buggy address belongs to the object at ffff88800d2c66a0 which belongs to the cache kmalloc-32 of size 32 The buggy address is located 28 bytes inside of 32-byte region [ffff88800d2c66a0, ffff88800d2c66c0) Fixes: c73be61cede5 ("pipe: Add general notification queue support") Reported-by: Jann Horn <jannh@google.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-03-16virtio: acknowledge all features before accessMichael S. Tsirkin1-1/+2
commit 4fa59ede95195f267101a1b8916992cf3f245cdb upstream. The feature negotiation was designed in a way that makes it possible for devices to know which config fields will be accessed by drivers. This is broken since commit 404123c2db79 ("virtio: allow drivers to validate features") with fallout in at least block and net. We have a partial work-around in commit 2f9a174f918e ("virtio: write back F_VERSION_1 before validate") which at least lets devices find out which format should config space have, but this is a partial fix: guests should not access config space without acknowledging features since otherwise we'll never be able to change the config space format. To fix, split finalize_features from virtio_finalize_features and call finalize_features with all feature bits before validation, and then - if validation changed any bits - once again after. Since virtio_finalize_features no longer writes out features rename it to virtio_features_ok - since that is what it does: checks that features are ok with the device. As a side effect, this also reduces the amount of hypervisor accesses - we now only acknowledge features once unless we are clearing any features when validating (which is uncommon). IRC I think that this was more or less always the intent in the spec but unfortunately the way the spec is worded does not say this explicitly, I plan to address this at the spec level, too. Acked-by: Jason Wang <jasowang@redhat.com> Cc: stable@vger.kernel.org Fixes: 404123c2db79 ("virtio: allow drivers to validate features") Fixes: 2f9a174f918e ("virtio: write back F_VERSION_1 before validate") Cc: "Halil Pasic" <pasic@linux.ibm.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-03-16virtio: unexport virtio_finalize_featuresMichael S. Tsirkin1-1/+0
commit 838d6d3461db0fdbf33fc5f8a69c27b50b4a46da upstream. virtio_finalize_features is only used internally within virtio. No reason to export it. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-03-16swiotlb: rework "fix info leak with DMA_FROM_DEVICE"Halil Pasic1-8/+0
commit aa6f8dcbab473f3a3c7454b74caa46d36cdc5d13 upstream. Unfortunately, we ended up merging an old version of the patch "fix info leak with DMA_FROM_DEVICE" instead of merging the latest one. Christoph (the swiotlb maintainer), he asked me to create an incremental fix (after I have pointed this out the mix up, and asked him for guidance). So here we go. The main differences between what we got and what was agreed are: * swiotlb_sync_single_for_device is also required to do an extra bounce * We decided not to introduce DMA_ATTR_OVERWRITE until we have exploiters * The implantation of DMA_ATTR_OVERWRITE is flawed: DMA_ATTR_OVERWRITE must take precedence over DMA_ATTR_SKIP_CPU_SYNC Thus this patch removes DMA_ATTR_OVERWRITE, and makes swiotlb_sync_single_for_device() bounce unconditionally (that is, also when dir == DMA_TO_DEVICE) in order do avoid synchronising back stale data from the swiotlb buffer. Let me note, that if the size used with dma_sync_* API is less than the size used with dma_[un]map_*, under certain circumstances we may still end up with swiotlb not being transparent. In that sense, this is no perfect fix either. To get this bullet proof, we would have to bounce the entire mapping/bounce buffer. For that we would have to figure out the starting address, and the size of the mapping in swiotlb_sync_single_for_device(). While this does seem possible, there seems to be no firm consensus on how things are supposed to work. Signed-off-by: Halil Pasic <pasic@linux.ibm.com> Fixes: ddbd89deb7d3 ("swiotlb: fix info leak with DMA_FROM_DEVICE") Cc: stable@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-03-16swiotlb: fix info leak with DMA_FROM_DEVICEHalil Pasic1-0/+8
[ Upstream commit ddbd89deb7d32b1fbb879f48d68fda1a8ac58e8e ] The problem I'm addressing was discovered by the LTP test covering cve-2018-1000204. A short description of what happens follows: 1) The test case issues a command code 00 (TEST UNIT READY) via the SG_IO interface with: dxfer_len == 524288, dxdfer_dir == SG_DXFER_FROM_DEV and a corresponding dxferp. The peculiar thing about this is that TUR is not reading from the device. 2) In sg_start_req() the invocation of blk_rq_map_user() effectively bounces the user-space buffer. As if the device was to transfer into it. Since commit a45b599ad808 ("scsi: sg: allocate with __GFP_ZERO in sg_build_indirect()") we make sure this first bounce buffer is allocated with GFP_ZERO. 3) For the rest of the story we keep ignoring that we have a TUR, so the device won't touch the buffer we prepare as if the we had a DMA_FROM_DEVICE type of situation. My setup uses a virtio-scsi device and the buffer allocated by SG is mapped by the function virtqueue_add_split() which uses DMA_FROM_DEVICE for the "in" sgs (here scatter-gather and not scsi generics). This mapping involves bouncing via the swiotlb (we need swiotlb to do virtio in protected guest like s390 Secure Execution, or AMD SEV). 4) When the SCSI TUR is done, we first copy back the content of the second (that is swiotlb) bounce buffer (which most likely contains some previous IO data), to the first bounce buffer, which contains all zeros. Then we copy back the content of the first bounce buffer to the user-space buffer. 5) The test case detects that the buffer, which it zero-initialized, ain't all zeros and fails. One can argue that this is an swiotlb problem, because without swiotlb we leak all zeros, and the swiotlb should be transparent in a sense that it does not affect the outcome (if all other participants are well behaved). Copying the content of the original buffer into the swiotlb buffer is the only way I can think of to make swiotlb transparent in such scenarios. So let's do just that if in doubt, but allow the driver to tell us that the whole mapped buffer is going to be overwritten, in which case we can preserve the old behavior and avoid the performance impact of the extra bounce. Signed-off-by: Halil Pasic <pasic@linux.ibm.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-03-16net/mlx5: Fix size field in bufferx_reg structMohammad Kabat1-2/+2
[ Upstream commit ac77998b7ac3044f0509b097da9637184598980d ] According to HW spec the field "size" should be 16 bits in bufferx register. Fixes: e281682bf294 ("net/mlx5_core: HW data structs/types definitions cleanup") Signed-off-by: Mohammad Kabat <mohammadkab@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-03-11arm64: entry: Add vectors that have the bhb mitigation sequencesJames Morse1-0/+5
commit ba2689234be92024e5635d30fe744f4853ad97db upstream. Some CPUs affected by Spectre-BHB need a sequence of branches, or a firmware call to be run before any indirect branch. This needs to go in the vectors. No CPU needs both. While this can be patched in, it would run on all CPUs as there is a single set of vectors. If only one part of a big/little combination is affected, the unaffected CPUs have to run the mitigation too. Create extra vectors that include the sequence. Subsequent patches will allow affected CPUs to select this set of vectors. Later patches will modify the loop count to match what the CPU requires. Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: James Morse <james.morse@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-03-11x86/speculation: Include unprivileged eBPF status in Spectre v2 mitigation ↵Josh Poimboeuf1-0/+12
reporting commit 44a3918c8245ab10c6c9719dd12e7a8d291980d8 upstream. With unprivileged eBPF enabled, eIBRS (without retpoline) is vulnerable to Spectre v2 BHB-based attacks. When both are enabled, print a warning message and report it in the 'spectre_v2' sysfs vulnerabilities file. Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> [fllinden@amazon.com: backported to 5.15] Signed-off-by: Frank van der Linden <fllinden@amazon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-03-08sched: Fix yet more sched_fork() racesPeter Zijlstra1-2/+2
commit b1e8206582f9d680cff7d04828708c8b6ab32957 upstream. Where commit 4ef0c5c6b5ba ("kernel/sched: Fix sched_fork() access an invalid sched_task_group") fixed a fork race vs cgroup, it opened up a race vs syscalls by not placing the task on the runqueue before it gets exposed through the pidhash. Commit 13765de8148f ("sched/fair: Fix fault in reweight_entity") is trying to fix a single instance of this, instead fix the whole class of issues, effectively reverting this commit. Fixes: 4ef0c5c6b5ba ("kernel/sched: Fix sched_fork() access an invalid sched_task_group") Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Tadeusz Struk <tadeusz.struk@linaro.org> Tested-by: Zhang Qiao <zhangqiao22@huawei.com> Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com> Link: https://lkml.kernel.org/r/YgoeCbwj5mbCR0qA@hirez.programming.kicks-ass.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-03-08net: of: fix stub of_net helpers for CONFIG_NET=nArnd Bergmann1-1/+1
[ Upstream commit 8b017fbe0bbb98dd71fb4850f6b9cc0e136a26b8 ] Moving the of_net code from drivers/of/ to net/core means we no longer stub out the helpers when networking is disabled, which leads to a randconfig build failure with at least one ARM platform that calls this from non-networking code: arm-linux-gnueabi-ld: arch/arm/mach-mvebu/kirkwood.o: in function `kirkwood_dt_eth_fixup': kirkwood.c:(.init.text+0x54): undefined reference to `of_get_mac_address' Restore the way this worked before by changing that #ifdef check back to testing for both CONFIG_OF and CONFIG_NET. Fixes: e330fb14590c ("of: net: move of_net under net/") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20211014090055.2058949-1-arnd@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-03-08of: net: move of_net under net/Jakub Kicinski1-1/+1
[ Upstream commit e330fb14590c5c80f7195c3d8c9b4bcf79e1a5cd ] Rob suggests to move of_net.c from under drivers/of/ somewhere to the networking code. Suggested-by: Rob Herring <robh@kernel.org> Signed-off-by: Jakub Kicinski &l