| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fix from Ingo Molnar:
"Fix a sparse build error regression in <linux/local_lock_internal.h>
caused by the locking context-analysis changes"
* tag 'locking-urgent-2026-03-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
include/linux/local_lock_internal.h: Make this header file again compatible with sparse
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core
Pull driver core fixes from Danilo Krummrich:
- Generalize driver_override in the driver core, providing a common
sysfs implementation and concurrency-safe accessors for bus
implementations
- Do not use driver_override as IRQ name in the hwmon axi-fan driver
- Remove an unnecessary driver_override check in sh platform_early
- Migrate the platform bus to use the generic driver_override
infrastructure, fixing a UAF condition caused by accessing the
driver_override field without proper locking in the platform_match()
callback
* tag 'driver-core-7.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core:
driver core: platform: use generic driver_override infrastructure
sh: platform_early: remove pdev->driver_override check
hwmon: axi-fan: don't use driver_override as IRQ name
docs: driver-model: document driver_override
driver core: generalize driver_override in struct device
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull execve fixes from Kees Cook:
- binfmt_elf_fdpic: fix AUXV size calculation (Andrei Vagin)
- fs/tests: exec: Remove bad test vector
* tag 'execve-v7.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
fs/tests: exec: Remove bad test vector
binfmt_elf_fdpic: fix AUXV size calculation for ELF_HWCAP3 and ELF_HWCAP4
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial fixes from Greg KH:
"Here are some small tty/vt and serial driver fixes for 7.0-rc5.
Included in here are:
- 8250 driver fixes for reported problems
- serial core lockup fix
- uartlite driver bugfix
- vt save/restore bugfix
All of these have been in linux-next for over a week with no reported
problems"
* tag 'tty-7.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
vt: save/restore unicode screen buffer for alternate screen
serial: 8250_dw: Ensure BUSY is deasserted
serial: 8250: Add late synchronize_irq() to shutdown to handle DW UART BUSY
serial: 8250_dw: Rework IIR_NO_INT handling to stop interrupt storm
serial: 8250_dw: Rework dw8250_handle_irq() locking and IIR handling
serial: 8250: Add serial8250_handle_irq_locked()
serial: 8250_dw: Avoid unnecessary LCR writes
serial: 8250: Protect LCR write in shutdown
serial: 8250_pci: add support for the AX99100
serial: core: fix infinite loop in handle_tx() for PORT_UNKNOWN
serial: uartlite: fix PM runtime usage count underflow on probe
serial: 8250: always disable IRQ during THRE test
serial: 8250: Fix TX deadlock when using DMA
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull io_uring fixes from Jens Axboe:
- A bit of a work-around for AF_UNIX recv multishot, as the in-kernel
implementation doesn't properly signal EOF. We'll likely rework this
one going forward, but the fix is sufficient for now
- Two fixes for incrementally consumed buffers, for non-pollable files
and for 0 byte reads
* tag 'io_uring-7.0-20260320' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
io_uring/kbuf: propagate BUF_MORE through early buffer commit path
io_uring/kbuf: fix missing BUF_MORE for incremental buffers at EOF
io_uring/poll: fix multishot recv missing EOF on wakeup race
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu fixes from Joerg Roedel:
"Intel VT-d:
- Abort all pending requests on dev_tlb_inv timeout to avoid
hardlockup
- Limit IOPF handling to PRI-capable device to avoid SVA attach
failure
AMD-Vi:
- Make sure identity domain is not used when SNP is active
Core fixes:
- Handle mapping IOVA 0x0 correctly
- Fix crash in SVA code
- Kernel-doc fix in IO-PGTable code"
* tag 'iommu-fixes-v7.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux:
iommu/amd: Block identity domain when SNP enabled
iommu/sva: Fix crash in iommu_sva_unbind_device()
iommu/io-pgtable: fix all kernel-doc warnings in io-pgtable.h
iommu: Fix mapping check for 0x0 to avoid re-mapping it
iommu/vt-d: Only handle IOPF for SVA when PRI is supported
iommu/vt-d: Fix intel iommu iotlb sync hardlockup and retry
|
|
When io_should_commit() returns true (eg for non-pollable files), buffer
commit happens at buffer selection time and sel->buf_list is set to
NULL. When __io_put_kbufs() generates CQE flags at completion time, it
calls __io_put_kbuf_ring() which finds a NULL buffer_list and hence
cannot determine whether the buffer was consumed or not. This means that
IORING_CQE_F_BUF_MORE is never set for non-pollable input with
incrementally consumed buffers.
Likewise for io_buffers_select(), which always commits upfront and
discards the return value of io_kbuf_commit().
Add REQ_F_BUF_MORE to store the result of io_kbuf_commit() during early
commit. Then __io_put_kbuf_ring() can check this flag and set
IORING_F_BUF_MORE accordingy.
Reported-by: Martin Michaelis <code@mgjm.de>
Cc: stable@vger.kernel.org
Fixes: ae98dbf43d75 ("io_uring/kbuf: add support for incremental buffer consumption")
Link: https://github.com/axboe/liburing/issues/1553
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from wireless, Bluetooth and netfilter.
Nothing too exciting here, mostly fixes for corner cases.
Current release - fix to a fix:
- bonding: prevent potential infinite loop in bond_header_parse()
Current release - new code bugs:
- wifi: mac80211: check tdls flag in ieee80211_tdls_oper
Previous releases - regressions:
- af_unix: give up GC if MSG_PEEK intervened
- netfilter: conntrack: add missing netlink policy validations
- NFC: nxp-nci: allow GPIOs to sleep"
* tag 'net-7.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (78 commits)
MPTCP: fix lock class name family in pm_nl_create_listen_socket
icmp: fix NULL pointer dereference in icmp_tag_validation()
net: dsa: bcm_sf2: fix missing clk_disable_unprepare() in error paths
net: shaper: protect from late creation of hierarchy
net: shaper: protect late read accesses to the hierarchy
net: mvpp2: guard flow control update with global_tx_fc in buffer switching
nfnetlink_osf: validate individual option lengths in fingerprints
netfilter: nf_tables: release flowtable after rcu grace period on error
netfilter: bpf: defer hook memory release until rcu readers are done
net: bonding: fix NULL deref in bond_debug_rlb_hash_show
udp_tunnel: fix NULL deref caused by udp_sock_create6 when CONFIG_IPV6=n
net/mlx5e: Fix race condition during IPSec ESN update
net/mlx5e: Prevent concurrent access to IPSec ASO context
net/mlx5: qos: Restrict RTNL area to avoid a lock cycle
ipv6: add NULL checks for idev in SRv6 paths
NFC: nxp-nci: allow GPIOs to sleep
net: macb: fix uninitialized rx_fs_lock
net: macb: fix use-after-free access to PTP clock
netdevsim: drop PSP ext ref on forward failure
wifi: mac80211: always free skb on ieee80211_tx_prepare_skb() failure
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Jiri Kosina:
- various fixes dealing with (intentionally) broken devices in HID
core, logitech-hidpp and multitouch drivers (Lee Jones)
- fix for OOB in wacom driver (Benoît Sevens)
- fix for potentialy HID-bpf-induced buffer overflow in () (Benjamin
Tissoires)
- various other small fixes and device ID / quirk additions
* tag 'hid-for-linus-2026031701' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: multitouch: Check to ensure report responses match the request
HID: logitech-hidpp: Prevent use-after-free on force feedback initialisation failure
HID: bpf: prevent buffer overflow in hid_hw_request
selftests/hid: fix compilation when bpf_wq and hid_device are not exported
HID: core: Mitigate potential OOB by removing bogus memset()
HID: intel-thc-hid: Set HID_PHYS with PCI BDF
HID: appletb-kbd: add .resume method in PM
HID: logitech-hidpp: Enable MX Master 4 over bluetooth
HID: input: Add HID_BATTERY_QUIRK_DYNAMIC for Elan touchscreens
HID: input: Drop Asus UX550* touchscreen ignore battery quirks
HID: asus: add xg mobile 2022 external hardware support
HID: wacom: fix out-of-bounds read in wacom_intuos_bt_irq
|
|
When a driver is probed through __driver_attach(), the bus' match()
callback is called without the device lock held, thus accessing the
driver_override field without a lock, which can cause a UAF.
Fix this by using the driver-core driver_override infrastructure taking
care of proper locking internally.
Note that calling match() from __driver_attach() without the device lock
held is intentional. [1]
Link: https://lore.kernel.org/driver-core/DGRGTIRHA62X.3RY09D9SOK77P@kernel.org/ [1]
Reported-by: Gui-Dong Han <hanguidong02@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220789
Fixes: 3d713e0e382e ("driver core: platform: add device binding path 'driver_override'")
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/20260303115720.48783-5-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Currently, there are 12 busses (including platform and PCI) that
duplicate the driver_override logic for their individual devices.
All of them seem to be prone to the bug described in [1].
While this could be solved for every bus individually using a separate
lock, solving this in the driver-core generically results in less (and
cleaner) changes overall.
Thus, move driver_override to struct device, provide corresponding
accessors for busses and handle locking with a separate lock internally.
In particular, add device_set_driver_override(),
device_has_driver_override(), device_match_driver_override() and
generalize the sysfs store() and show() callbacks via a driver_override
feature flag in struct bus_type.
Until all busses have migrated, keep driver_set_override() in place.
Note that we can't use the device lock for the reasons described in [2].
Link: https://bugzilla.kernel.org/show_bug.cgi?id=220789 [1]
Link: https://lore.kernel.org/driver-core/DGRGTIRHA62X.3RY09D9SOK77P@kernel.org/ [2]
Tested-by: Gui-Dong Han <hanguidong02@gmail.com>
Co-developed-by: Gui-Dong Han <hanguidong02@gmail.com>
Signed-off-by: Gui-Dong Han <hanguidong02@gmail.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/20260303115720.48783-2-dakr@kernel.org
[ Use dev->bus instead of sp->bus for consistency; fix commit message to
refer to the struct bus_type's driver_override feature flag. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Avoid kernel-doc warnings in io-pgtable.h:
- use the correct struct member names or kernel-doc format
- add a missing struct member description
- add a missing function return comment section
Warning: include/linux/io-pgtable.h:187 struct member 'coherent_walk' not
described in 'io_pgtable_cfg'
Warning: include/linux/io-pgtable.h:187 struct member 'arm_lpae_s1_cfg' not
described in 'io_pgtable_cfg'
Warning: include/linux/io-pgtable.h:187 struct member 'arm_lpae_s2_cfg' not
described in 'io_pgtable_cfg'
Warning: include/linux/io-pgtable.h:187 struct member 'arm_v7s_cfg' not
described in 'io_pgtable_cfg'
Warning: include/linux/io-pgtable.h:187 struct member 'arm_mali_lpae_cfg'
not described in 'io_pgtable_cfg'
Warning: include/linux/io-pgtable.h:187 struct member 'apple_dart_cfg' not
described in 'io_pgtable_cfg'
Warning: include/linux/io-pgtable.h:187 struct member 'amd' not described
in 'io_pgtable_cfg'
Warning: include/linux/io-pgtable.h:223 struct member
'read_and_clear_dirty' not described in 'io_pgtable_ops'
Warning: include/linux/io-pgtable.h:237 No description found for return
value of 'alloc_io_pgtable_ops'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
bond_header_parse() can loop if a stack of two bonding devices is setup,
because skb->dev always points to the hierarchy top.
Add new "const struct net_device *dev" parameter to
(struct header_ops)->parse() method to make sure the recursion
is bounded, and that the final leaf parse method is called.
Fixes: 950803f72547 ("bonding: fix type confusion in bond_setup_by_slave()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jiayuan Chen <jiayuan.chen@shopee.com>
Tested-by: Jiayuan Chen <jiayuan.chen@shopee.com>
Cc: Jay Vosburgh <jv@jvosburgh.net>
Cc: Andrew Lunn <andrew+netdev@lunn.ch>
Link: https://patch.msgid.link/20260315104152.1436867-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"6 hotfixes. 4 are cc:stable. 3 are for MM.
All are singletons - please see the changelogs for details"
* tag 'mm-hotfixes-stable-2026-03-16-12-15' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
MAINTAINERS: update email address for Ignat Korchagin
mm/huge_memory: fix early failure try_to_migrate() when split huge pmd for shared THP
mm/rmap: fix incorrect pte restoration for lazyfree folios
mm/huge_memory: fix use of NULL folio in move_pages_huge_pmd()
build_bug.h: correct function parameters names in kernel-doc
crash_dump: don't log dm-crypt key bytes in read_key_from_user_keying
|
|
Pull kvm fixes from Paolo Bonzini:
"Quite a large pull request, partly due to skipping last week and
therefore having material from ~all submaintainers in this one. About
a fourth of it is a new selftest, and a couple more changes are large
in number of files touched (fixing a -Wflex-array-member-not-at-end
compiler warning) or lines changed (reformatting of a table in the API
documentation, thanks rST).
But who am I kidding---it's a lot of commits and there are a lot of
bugs being fixed here, some of them on the nastier side like the
RISC-V ones.
ARM:
- Correctly handle deactivation of interrupts that were activated
from LRs. Since EOIcount only denotes deactivation of interrupts
that are not present in an LR, start EOIcount deactivation walk
*after* the last irq that made it into an LR
- Avoid calling into the stubs to probe for ICH_VTR_EL2.TDS when pKVM
is already enabled -- not only thhis isn't possible (pKVM will
reject the call), but it is also useless: this can only happen for
a CPU that has already booted once, and the capability will not
change
- Fix a couple of low-severity bugs in our S2 fault handling path,
affecting the recently introduced LS64 handling and the even more
esoteric handling of hwpoison in a nested context
- Address yet another syzkaller finding in the vgic initialisation,
where we would end-up destroying an uninitialised vgic with nasty
consequences
- Address an annoying case of pKVM failing to boot when some of the
memblock regions that the host is faulting in are not page-aligned
- Inject some sanity in the NV stage-2 walker by checking the limits
against the advertised PA size, and correctly report the resulting
faults
PPC:
- Fix a PPC e500 build error due to a long-standing wart that was
exposed by the recent conversion to kmalloc_obj(); rip out all the
ugliness that led to the wart
RISC-V:
- Prevent speculative out-of-bounds access using array_index_nospec()
in APLIC interrupt handling, ONE_REG regiser access, AIA CSR
access, float register access, and PMU counter access
- Fix potential use-after-free issues in kvm_riscv_gstage_get_leaf(),
kvm_riscv_aia_aplic_has_attr(), and kvm_riscv_aia_imsic_has_attr()
- Fix potential null pointer dereference in
kvm_riscv_vcpu_aia_rmw_topei()
- Fix off-by-one array access in SBI PMU
- Skip THP support check during dirty logging
- Fix error code returned for Smstateen and Ssaia ONE_REG interface
- Check host Ssaia extension when creating AIA irqchip
x86:
- Fix cases where CPUID mitigation features were incorrectly marked
as available whenever the kernel used scattered feature words for
them
- Validate _all_ GVAs, rather than just the first GVA, when
processing a range of GVAs for Hyper-V's TLB flush hypercalls
- Fix a brown paper bug in add_atomic_switch_msr()
- Use hlist_for_each_entry_srcu() when traversing mask_notifier_list,
to fix a lockdep warning; KVM doesn't hold RCU, just irq_srcu
- Ensure AVIC VMCB fields are initialized if the VM has an in-kernel
local APIC (and AVIC is enabled at the module level)
- Update CR8 write interception when AVIC is (de)activated, to fix a
bug where the guest can run in perpetuity with the CR8 intercept
enabled
- Add a quirk to skip the consistency check on FREEZE_IN_SMM, i.e. to
allow L1 hypervisors to set FREEZE_IN_SMM. This reverts (by
default) an unintentional tightening of userspace ABI in 6.17, and
provides some amount of backwards compatibility with hypervisors
who want to freeze PMCs on VM-Entry
- Validate the VMCS/VMCB on return to a nested guest from SMM,
because either userspace or the guest could stash invalid values in
memory and trigger the processor's consistency checks
Generic:
- Remove a subtle pseudo-overlay of kvm_stats_desc, which, aside from
being unnecessary and confusing, triggered compiler warnings due to
-Wflex-array-member-not-at-end
- Document that vcpu->mutex is take outside of kvm->slots_lock and
kvm->slots_arch_lock, which is intentional and desirable despite
being rather unintuitive
Selftests:
- Increase the maximum number of NUMA nodes in the guest_memfd
selftest to 64 (from 8)"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (43 commits)
KVM: selftests: Verify SEV+ guests can read and write EFER, CR0, CR4, and CR8
Documentation: kvm: fix formatting of the quirks table
KVM: x86: clarify leave_smm() return value
selftests: kvm: add a test that VMX validates controls on RSM
selftests: kvm: extract common functionality out of smm_test.c
KVM: SVM: check validity of VMCB controls when returning from SMM
KVM: VMX: check validity of VMCS controls when returning from SMM
KVM: SVM: Set/clear CR8 write interception when AVIC is (de)activated
KVM: SVM: Initialize AVIC VMCB fields if AVIC is enabled with in-kernel APIC
KVM: x86: Introduce KVM_X86_QUIRK_VMCS12_ALLOW_FREEZE_IN_SMM
KVM: x86: Fix SRCU list traversal in kvm_fire_mask_notifiers()
KVM: VMX: Fix a wrong MSR update in add_atomic_switch_msr()
KVM: x86: hyper-v: Validate all GVAs during PV TLB flush
KVM: x86: synthesize CPUID bits only if CPU capability is set
KVM: PPC: e500: Rip out "struct tlbe_ref"
KVM: PPC: e500: Fix build error due to using kmalloc_obj() with wrong type
KVM: selftests: Increase 'maxnode' for guest_memfd tests
KVM: arm64: pkvm: Don't reprobe for ICH_VTR_EL2.TDS on CPU hotplug
KVM: arm64: vgic: Pick EOIcount deactivations from AP-list tail
KVM: arm64: Remove the redundant ISB in __kvm_at_s1e2()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Ingo Molnar:
"More MM-CID fixes, mostly fixing hangs/races:
- Fix CID hangs due to a race between concurrent forks
- Fix vfork()/CLONE_VM MMCID bug causing hangs
- Remove pointless preemption guard
- Fix CID task list walk performance regression on large systems
by removing the known-flaky and slow counting logic using
for_each_process_thread() in mm_cid_*fixup_tasks_to_cpus(), and
implementing a simple sched_mm_cid::node list instead"
* tag 'sched-urgent-2026-03-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/mmcid: Avoid full tasklist walks
sched/mmcid: Remove pointless preempt guard
sched/mmcid: Handle vfork()/CLONE_VM correctly
sched/mmcid: Prevent CID stalls due to concurrent forks
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here is a large chunk of USB driver fixes for 7.0-rc4. Included in
here are:
- usb gadget reverts due to reported issues, and then a follow-on fix
to hopefully resolve the reported overall problem
- xhci driver fixes
- dwc3 driver fixes
- usb core "killable" bulk message api addition to fix a usbtmc
driver bug where userspace could hang the driver for forever
- small USB driver fixes for reported issues
- new usb device quirks
All except the last USB device quirk change have been in linux-next
with no reported issues. That one came in too late, and is 'obviously
correct' :)"
* tag 'usb-7.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (35 commits)
USB: ezcap401 needs USB_QUIRK_NO_BOS to function on 10gbs usb speed
usb: roles: get usb role switch from parent only for usb-b-connector
Revert "tcpm: allow looking for role_sw device in the main node"
usb: gadget: f_ncm: Fix net_device lifecycle with device_move
Revert "usb: gadget: u_ether: add gether_opts for config caching"
Revert "usb: gadget: u_ether: use <linux/hex.h> header file"
Revert "usb: gadget: u_ether: Add auto-cleanup helper for freeing net_device"
Revert "usb: gadget: f_ncm: align net_device lifecycle with bind/unbind"
Revert "usb: legacy: ncm: Fix NPE in gncm_bind"
Revert "usb: gadget: f_ncm: Fix atomic context locking issue"
usb: typec: altmode/displayport: set displayport signaling rate in configure message
usb: dwc3: pci: add support for the Intel Nova Lake -H
usb/core/quirks: Add Huawei ME906S-device to wakeup quirk
usb: gadget: uvc: fix interval_duration calculation
xhci: Fix NULL pointer dereference when reading portli debugfs files
usb: xhci: Prevent interrupt storm on host controller error (HCE)
usb: xhci: Fix memory leak in xhci_disable_slot()
usb: class: cdc-wdm: fix reordering issue in read code path
usb: renesas_usbhs: fix use-after-free in ISR during device removal
usb: cdc-acm: Restore CAP_BRK functionnality to CH343
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc / IIO driver fixes from Greg KH:
"Here are some char/misc/iio/binder fixes for 7.0-rc4. Nothing major in
here, just the usual:
- lots of iio driver fixes for reported issues
- rust binder fixes for problems found
- gpib driver binding to the wrong device fix
- firmware driver fix
All of these have been in linux-next with no reported issues"
* tag 'char-misc-7.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (28 commits)
gpib: lpvo_usb: fix unintended binding of FTDI 8U232AM devices
firmware: stratix10-svc: Add Multi SVC clients support
rust_binder: use lock_vma_under_rcu() in use_page_slow()
rust_binder: call set_notification_done() without proc lock
rust_binder: avoid reading the written value in offsets array
rust_binder: check ownership before using vma
rust_binder: fix oneway spam detection
firmware: stratix10-rsu: Fix NULL pointer dereference when RSU is disabled
iio: imu: adis: Fix NULL pointer dereference in adis_init
iio: imu: inv_icm45600: fix regulator put warning when probe fails
iio: buffer: Fix wait_queue not being removed
iio: gyro: mpu3050-core: fix pm_runtime error handling
iio: gyro: mpu3050-i2c: fix pm_runtime error handling
iio: adc: ad7768-1: Fix ERR_PTR dereference in ad7768_fill_scale_tbl
iio: chemical: sps30_serial: fix buffer size in sps30_serial_read_meas()
iio: chemical: sps30_i2c: fix buffer size in sps30_i2c_read_meas()
iio: magnetometer: tlv493d: remove erroneous shift in X-axis data
iio: proximity: hx9023s: Protect against division by zero in set_samp_freq
iio: proximity: hx9023s: fix assignment order for __counted_by
iio: chemical: bme680: Fix measurement wait duration calculation
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull block fixes from Jens Axboe:
- NVMe pull request via Keith:
- Fix nvme-pci IRQ race and slab-out-of-bounds access
- Fix recursive workqueue locking for target async events
- Various cleanups
- Fix a potential NULL pointer dereference in ublk on size setting
- ublk automatic partition scanning fix
- Two s390 dasd fixes
* tag 'block-7.0-20260312' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
nvme: Annotate struct nvme_dhchap_key with __counted_by
nvme-core: do not pass empty queue_limits to blk_mq_alloc_queue()
nvme-pci: Fix race bug in nvme_poll_irqdisable()
nvmet: move async event work off nvmet-wq
nvme-pci: Fix slab-out-of-bounds in nvme_dbbuf_set
s390/dasd: Copy detected format information to secondary device
s390/dasd: Move quiesce state with pprc swap
ublk: don't clear GD_SUPPRESS_PART_SCAN for unprivileged daemons
ublk: fix NULL pointer dereference in ublk_ctrl_set_size()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull io_uring fixes from Jens Axboe:
- Fix an inverted true/false comment on task_no_new_privs, from the
BPF filtering changes merged in this release
- Use the migration disabling way of running the BPF filters, as the
io_uring side doesn't do that already
- Fix an issue with ->rings stability under resize, both for local
task_work additions and for eventfd signaling
- Fix an issue with SQE mixed mode, where a bounds check wasn't correct
for having a 128b SQE
- Fix an issue where a legacy provided buffer group is changed to to
ring mapped one while legacy buffers from that group are in flight
* tag 'io_uring-7.0-20260312' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
io_uring/kbuf: check if target buffer list is still legacy on recycle
io_uring: fix physical SQE bounds check for SQE_MIXED 128-byte ops
io_uring/eventfd: use ctx->rings_rcu for flags checking
io_uring: ensure ctx->rings is stable for task work flags manipulation
io_uring/bpf_filter: use bpf_prog_run_pin_on_cpu() to prevent migration
io_uring/register: fix comment about task_no_new_privs
|
|
The alternate screen support added by commit 23743ba64709 ("vt: add
support for smput/rmput escape codes") only saves and restores the
regular screen buffer (vc_origin), but completely ignores the corresponding
unicode screen buffer (vc_uni_lines) creating a messed-up display.
Add vc_saved_uni_lines to save the unicode screen buffer when entering
the alternate screen, and restore it when leaving. Also ensure proper
cleanup in reset_terminal() and vc_deallocate().
Fixes: 23743ba64709 ("vt: add support for smput/rmput escape codes")
Cc: stable <stable@kernel.org>
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Link: https://patch.msgid.link/5o2p6qp3-91pq-0p17-or02-1oors4417ns7@onlyvoer.pbz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Blamed commits forgot that vxlan/geneve use udp_tunnel[6]_xmit_skb() which
call iptunnel_xmit_stats().
iptunnel_xmit_stats() was assuming tunnels were only using
NETDEV_PCPU_STAT_TSTATS.
@syncp offset in pcpu_sw_netstats and pcpu_dstats is different.
32bit kernels would either have corruptions or freezes if the syncp
sequence was overwritten.
This patch also moves pcpu_stat_type closer to dev->{t,d}stats to avoid
a potential cache line miss since iptunnel_xmit_stats() needs to read it.
Fixes: 6fa6de302246 ("geneve: Handle stats using NETDEV_PCPU_STAT_DSTATS.")
Fixes: be226352e8dc ("vxlan: Handle stats using NETDEV_PCPU_STAT_DSTATS.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Link: https://patch.msgid.link/20260311123110.1471930-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from CAN and netfilter.
Current release - regressions:
- eth: mana: Null service_wq on setup error to prevent double destroy
Previous releases - regressions:
- nexthop: fix percpu use-after-free in remove_nh_grp_entry
- sched: teql: fix NULL pointer dereference in iptunnel_xmit on TEQL slave xmit
- bpf: fix nd_tbl NULL dereference when IPv6 is disabled
- neighbour: restore protocol != 0 check in pneigh update
- tipc: fix divide-by-zero in tipc_sk_filter_connect()
- eth:
- mlx5:
- fix crash when moving to switchdev mode
- fix DMA FIFO desync on error CQE SQ recovery
- iavf: fix PTP use-after-free during reset
- bonding: fix type confusion in bond_setup_by_slave()
- lan78xx: fix WARN in __netif_napi_del_locked on disconnect
Previous releases - always broken:
- core: add xmit recursion limit to tunnel xmit functions
- net-shapers: don't free reply skb after genlmsg_reply()
- netfilter:
- fix stack out-of-bounds read in pipapo_drop()
- fix OOB read in nfnl_cthelper_dump_table()
- mctp:
- fix device leak on probe failure
- i2c: fix skb memory leak in receive path
- can: keep the max bitrate error at 5%
- eth:
- bonding: fix nd_tbl NULL dereference when IPv6 is disabled
- bnxt_en: fix RSS table size check when changing ethtool channels
- amd-xgbe: prevent CRC errors during RX adaptation with AN disabled
- octeontx2-af: devlink: fix NIX RAS reporter recovery condition"
* tag 'net-7.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (71 commits)
net: prevent NULL deref in ip[6]tunnel_xmit()
octeontx2-af: devlink: fix NIX RAS reporter to use RAS interrupt status
octeontx2-af: devlink: fix NIX RAS reporter recovery condition
net: ethernet: ti: am65-cpsw-nuss: Fix rx_filter value for PTP support
net/mana: Null service_wq on setup error to prevent double destroy
selftests: rtnetlink: add neighbour update test
neighbour: restore protocol != 0 check in pneigh update
net: dsa: realtek: Fix LED group port bit for non-zero LED group
tipc: fix divide-by-zero in tipc_sk_filter_connect()
net: dsa: microchip: Fix error path in PTP IRQ setup
bpf: bpf_out_neigh_v6: Fix nd_tbl NULL dereference when IPv6 is disabled
bpf: bpf_out_neigh_v4: Fix nd_tbl NULL dereference when IPv6 is disabled
net: bonding: Fix nd_tbl NULL dereference when IPv6 is disabled
ipv6: move the disable_ipv6_mod knob to core code
net: bcmgenet: fix broken EEE by converting to phylib-managed state
net-shapers: don't free reply skb after genlmsg_reply()
net: dsa: mxl862xx: don't set user_mii_bus
net: ethernet: arc: emac: quiesce interrupts before requesting IRQ
page_pool: store detach_time as ktime_t to avoid false-negatives
net: macb: Shuffle the tx ring before enabling tx
...
|
|
8250_port exports serial8250_handle_irq() to HW specific 8250 drivers.
It takes port's lock within but a HW specific 8250 driver may want to
take port's lock itself, do something, and then call the generic
handler in 8250_port but to do that, the caller has to release port's
lock for no good reason.
Introduce serial8250_handle_irq_locked() which a HW specific driver can
call while already holding port's lock.
As this is new export, put it straight into a namespace (where all 8250
exports should eventually be moved).
Tested-by: Bandal, Shankar <shankar.bandal@intel.com>
Tested-by: Murthy, Shanth <shanth.murthy@intel.com>
Cc: stable <stable@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://patch.msgid.link/20260203171049.4353-4-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
with sparse
There are two versions of the __this_cpu_local_lock() definitions in
include/linux/local_lock_internal.h: one version that relies on the
Clang overloading functionality and another version that does not.
Select the latter version when using sparse. This patch fixes the
following errors reported by sparse:
include/linux/local_lock_internal.h:331:40: sparse: sparse: multiple definitions for function '__this_cpu_local_lock'
include/linux/local_lock_internal.h:325:37: sparse: the previous one is here
Closes: https://lore.kernel.org/oe-kbuild-all/202603062334.wgI5htP0-lkp@intel.com/
Fixes: d3febf16dee2 ("locking/local_lock: Support Clang's context analysis")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Marco Elver <elver@google.com>
Link: https://patch.msgid.link/20260311231455.1961413-1-bvanassche@acm.org
|
|
From: Jakub Kicinski <kuba@kernel.org>
Make sure disable_ipv6_mod itself is not part of the IPv6 module,
in case core code wants to refer to it. We will remove support
for IPv6=m soon, this change helps make fixes we commit before
that less messy.
Link: https://patch.msgid.link/20260307-net-nd_tbl_fixes-v4-1-e2677e85628c@suse.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If DEFER_TASKRUN | SETUP_TASKRUN is used and task work is added while
the ring is being resized, it's possible for the OR'ing of
IORING_SQ_TASKRUN to happen in the small window of swapping into the
new rings and the old rings being freed.
Prevent this by adding a 2nd ->rings pointer, ->rings_rcu, which is
protected by RCU. The task work flags manipulation is inside RCU
already, and if the resize ring freeing is done post an RCU synchronize,
then there's no need to add locking to the fast path of task work
additions.
Note: this is only done for DEFER_TASKRUN, as that's the only setup mode
that supports ring resizing. If this ever changes, then they too need to
use the io_ctx_mark_taskrun() helper.
Link: https://lore.kernel.org/io-uring/20260309062759.482210-1-naup96721@gmail.com/
Cc: stable@vger.kernel.org
Fixes: 79cfe9e59c2a ("io_uring/register: add IORING_REGISTER_RESIZE_RINGS")
Reported-by: Hao-Yu Yang <naup96721@gmail.com>
Suggested-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
HEAD
KVM generic changes for 7.0
- Remove a subtle pseudo-overlay of kvm_stats_desc, which, aside from being
unnecessary and confusing, triggered compiler warnings due to
-Wflex-array-member-not-at-end.
- Document that vcpu->mutex is take outside of kvm->slots_lock and
kvm->slots_arch_lock, which is intentional and desirable despite being
rather unintuitive.
|
|
Some USB devices incorrectly report bNumConfigurations as 0 in their
device descriptor, which causes the USB core to reject them during
enumeration.
logs:
usb 1-2: device descriptor read/64, error -71
usb 1-2: no configurations
usb 1-2: can't read configurations, error -22
However, these devices actually work correctly when
treated as having a single configuration.
Add a new quirk USB_QUIRK_FORCE_ONE_CONFIG to handle such devices.
When this quirk is set, assume the device has 1 configuration instead
of failing with -EINVAL.
This quirk is applied to the device with VID:PID 5131:2007 which
exhibits this behavior.
Signed-off-by: Jie Deng <dengjie03@kylinos.cn>
Link: https://patch.msgid.link/20260227084931.1527461-1-dengjie03@kylinos.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The usb_control_msg(), usb_bulk_msg(), and usb_interrupt_msg() APIs in
usbcore allow unlimited timeout durations. And since they use
uninterruptible waits, this leaves open the possibility of hanging a
task for an indefinitely long time, with no way to kill it short of
unplugging the target device.
To prevent this sort of problem, enforce a maximum limit on the length
of these unkillable timeouts. The limit chosen here, somewhat
arbitrarily, is 60 seconds. On many systems (although not all) this
is short enough to avoid triggering the kernel's hung-task detector.
In addition, clear up the ambiguity of negative timeout values by
treating them the same as 0, i.e., using the maximum allowed timeout.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/linux-usb/3acfe838-6334-4f6d-be7c-4bb01704b33d@rowland.harvard.edu/
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
CC: stable@vger.kernel.org
Link: https://patch.msgid.link/15fc9773-a007-47b0-a703-df89a8cf83dd@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The synchronous message API in usbcore (usb_control_msg(),
usb_bulk_msg(), and so on) uses uninterruptible waits. However,
drivers may call these routines in the context of a user thread, which
means it ought to be possible to at least kill them.
For this reason, introduce a new usb_bulk_msg_killable() function
which behaves the same as usb_bulk_msg() except for using
wait_for_completion_killable_timeout() instead of
wait_for_completion_timeout(). The same can be done later for
usb_control_msg() later on, if it turns out to be needed.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Suggested-by: Oliver Neukum <oneukum@suse.com>
Link: https://lore.kernel.org/linux-usb/3acfe838-6334-4f6d-be7c-4bb01704b33d@rowland.harvard.edu/
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
CC: stable@vger.kernel.org
Link: https://patch.msgid.link/248628b4-cc83-4e81-a620-3ce4e0376d41@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Elan touchscreens have a HID-battery device for the stylus which is always
there even if there is no stylus.
This is causing upower to report an empty battery for the stylus and some
desktop-environments will show a notification about this, which is quite
annoying.
Because of this the HID-battery is being ignored on all Elan I2c and USB
touchscreens, but this causes there to be no battery reporting for
the stylus at all.
This adds a new HID_BATTERY_QUIRK_DYNAMIC and uses these for the Elan
touchscreens.
This new quirks causes the present value of the battery to start at 0,
which will make userspace ignore it and only sets present to 1 after
receiving a battery input report which only happens when the stylus
gets in range.
Reported-by: ggrundik@gmail.com
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=221118
Signed-off-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Chasing vfork()'ed tasks on a CID ownership mode switch requires a full
task list walk, which is obviously expensive on large systems.
Avoid that by keeping a list of tasks using a mm MMCID entity in mm::mm_cid
and walk this list instead. This removes the proven to be flaky counting
logic and avoids a full task list walk in the case of vfork()'ed tasks.
Fixes: fbd0e71dc370 ("sched/mmcid: Provide CID ownership mode fixup functions")
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260310202526.183824481@kernel.org
|
|
A newly forked task is accounted as MMCID user before the task is visible
in the process' thread list and the global task list. This creates the
following problem:
CPU1 CPU2
fork()
sched_mm_cid_fork(tnew1)
tnew1->mm.mm_cid_users++;
tnew1->mm_cid.cid = getcid()
-> preemption
fork()
sched_mm_cid_fork(tnew2)
tnew2->mm.mm_cid_users++;
// Reaches the per CPU threshold
mm_cid_fixup_tasks_to_cpus()
for_each_other(current, p)
....
As tnew1 is not visible yet, this fails to fix up the already allocated CID
of tnew1. As a consequence a subsequent schedule in might fail to acquire a
(transitional) CID and the machine stalls.
Move the invocation of sched_mm_cid_fork() after the new task becomes
visible in the thread and the task list to prevent this.
This also makes it symmetrical vs. exit() where the task is removed as CID
user before the task is removed from the thread and task lists.
Fixes: fbd0e71dc370 ("sched/mmcid: Provide CID ownership mode fixup functions")
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260310202525.969061974@kernel.org
|
|
Use the correct function (or macro) names to avoid kernel-doc warnings:
Warning: include/linux/build_bug.h:38 function parameter 'cond' not
described in 'BUILD_BUG_ON_MSG'
Warning: include/linux/build_bug.h:38 function parameter 'msg' not
described in 'BUILD_BUG_ON_MSG'
Warning: include/linux/build_bug.h:76 function parameter 'expr' not
described in 'static_assert'
Link: https://lkml.kernel.org/r/20260302005144.3467019-1-rdunlap@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"15 hotfixes. 6 are cc:stable. 14 are for MM.
Singletons, with one doubleton - please see the changelogs for details"
* tag 'mm-hotfixes-stable-2026-03-09-16-36' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
MAINTAINERS, mailmap: update email address for Lorenzo Stoakes
mm/mmu_notifier: clean up mmu_notifier.h kernel-doc
uaccess: correct kernel-doc parameter format
mm/huge_memory: fix a folio_split() race condition with folio_try_get()
MAINTAINERS: add co-maintainer and reviewer for SLAB ALLOCATOR
MAINTAINERS: add RELAY entry
memcg: fix slab accounting in refill_obj_stock() trylock path
mm/hugetlb.c: use __pa() instead of virt_to_phys() in early bootmem alloc code
zram: rename writeback_compressed device attr
tools/testing: fix testing/vma and testing/radix-tree build
Revert "ptdesc: remove references to folios from __pagetable_ctor() and pagetable_dtor()"
mm/cma: move put_page_testzero() out of VM_WARN_ON in cma_release()
mm/damon/core: clear walk_control on inactive context in damos_walk()
mm: memfd_luo: always dirty all folios
mm: memfd_luo: always make all folios uptodate
|
|
In the current implementation, SVC client drivers such as socfpga-hwmon,
intel_fcs, stratix10-soc, stratix10-rsu each send an SMC command that
triggers a single thread in the stratix10-svc driver. Upon receiving a
callback, the initiating client driver sends a stratix10-svc-done signal,
terminating the thread without waiting for other pending SMC commands to
complete. This leads to a timeout issue in the firmware SVC mailbox service
when multiple client drivers send SMC commands concurrently.
To resolve this issue, a dedicated thread is now created per channel. The
stratix10-svc driver will support up to the number of channels defined by
SVC_NUM_CHANNEL. Thread synchronization is handled using a mutex to prevent
simultaneous issuance of SMC commands by multiple threads.
SVC_NUM_DATA_IN_FIFO is reduced from 32 to 8, since each channel now has
its own dedicated FIFO and the SDM processes commands one at a time.
8 entries per channel is sufficient while keeping the total aggregate
capacity the same (4 channels x 8 = 32 entries).
Additionally, a thread task is now validated before invoking kthread_stop
when the user aborts, ensuring safe termination.
Timeout values have also been adjusted to accommodate the increased load
from concurrent client driver activity.
Fixes: 7ca5ce896524 ("firmware: add Intel Stratix10 service layer driver")
Cc: stable@vger.kernel.org
Signed-off-by: Ang Tien Sung <tien.sung.ang@altera.com>
Signed-off-by: Fong, Yan Kei <yankei.fong@altera.com>
Signed-off-by: Muhammad Amirul Asyraf Mohamad Jamian <muhammad.amirul.asyraf.mohamad.jamian@altera.com>
Link: https://lore.kernel.org/all/20260305093151.2678-1-muhammad.amirul.asyraf.mohamad.jamian@altera.com
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
Add the __counted_by() compiler attribute to the flexible array member
'key' to improve access bounds-checking via CONFIG_UBSAN_BOUNDS and
CONFIG_FORTIFY_SOURCE.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Tunnel xmit functions (iptunnel_xmit, ip6tunnel_xmit) lack their own
recursion limit. When a bond device in broadcast mode has GRE tap
interfaces as slaves, and those GRE tunnels route back through the
bond, multicast/broadcast traffic triggers infinite recursion between
bond_xmit_broadcast() and ip_tunnel_xmit()/ip6_tnl_xmit(), causing
kernel stack overflow.
The existing XMIT_RECURSION_LIMIT (8) in the no-qdisc path is not
sufficient because tunnel recursion involves route lookups and full IP
output, consuming much more stack per level. Use a lower limit of 4
(IP_TUNNEL_RECURSION_LIMIT) to prevent overflow.
Add recursion detection using dev_xmit_recursion helpers directly in
iptunnel_xmit() and ip6tunnel_xmit() to cover all IPv4/IPv6 tunnel
paths including UDP encapsulated tunnels (VXLAN, Geneve, etc.).
Move dev_xmit_recursion helpers from net/core/dev.h to public header
include/linux/netdevice.h so they can be used by tunnel code.
BUG: KASAN: stack-out-of-bounds in blake2s.constprop.0+0xe7/0x160
Write of size 32 at addr ffff88810033fed0 by task kworker/0:1/11
Workqueue: mld mld_ifc_work
Call Trace:
<TASK>
__build_flow_key.constprop.0 (net/ipv4/route.c:515)
ip_rt_update_pmtu (net/ipv4/route.c:1073)
iptunnel_xmit (net/ipv4/ip_tunnel_core.c:84)
ip_tunnel_xmit (net/ipv4/ip_tunnel.c:847)
gre_tap_xmit (net/ipv4/ip_gre.c:779)
dev_hard_start_xmit (net/core/dev.c:3887)
sch_direct_xmit (net/sched/sch_generic.c:347)
__dev_queue_xmit (net/core/dev.c:4802)
bond_dev_queue_xmit (drivers/net/bonding/bond_main.c:312)
bond_xmit_broadcast (drivers/net/bonding/bond_main.c:5279)
bond_start_xmit (drivers/net/bonding/bond_main.c:5530)
dev_hard_start_xmit (net/core/dev.c:3887)
__dev_queue_xmit (net/core/dev.c:4841)
ip_finish_output2 (net/ipv4/ip_output.c:237)
ip_output (net/ipv4/ip_output.c:438)
iptunnel_xmit (net/ipv4/ip_tunnel_core.c:86)
gre_tap_xmit (net/ipv4/ip_gre.c:779)
dev_hard_start_xmit (net/core/dev.c:3887)
sch_direct_xmit (net/sched/sch_generic.c:347)
__dev_queue_xmit (net/core/dev.c:4802)
bond_dev_queue_xmit (drivers/net/bonding/bond_main.c:312)
bond_xmit_broadcast (drivers/net/bonding/bond_main.c:5279)
bond_start_xmit (drivers/net/bonding/bond_main.c:5530)
dev_hard_start_xmit (net/core/dev.c:3887)
__dev_queue_xmit (net/core/dev.c:4841)
ip_finish_output2 (net/ipv4/ip_output.c:237)
ip_output (net/ipv4/ip_output.c:438)
iptunnel_xmit (net/ipv4/ip_tunnel_core.c:86)
ip_tunnel_xmit (net/ipv4/ip_tunnel.c:847)
gre_tap_xmit (net/ipv4/ip_gre.c:779)
dev_hard_start_xmit (net/core/dev.c:3887)
sch_direct_xmit (net/sched/sch_generic.c:347)
__dev_queue_xmit (net/core/dev.c:4802)
bond_dev_queue_xmit (drivers/net/bonding/bond_main.c:312)
bond_xmit_broadcast (drivers/net/bonding/bond_main.c:5279)
bond_start_xmit (drivers/net/bonding/bond_main.c:5530)
dev_hard_start_xmit (net/core/dev.c:3887)
__dev_queue_xmit (net/core/dev.c:4841)
mld_sendpack
mld_ifc_work
process_one_work
worker_thread
</TASK>
Fixes: 745e20f1b626 ("net: add a recursion limit in xmit path")
Reported-by: Xiang Mei <xmei5@asu.edu>
Signed-off-by: Weiming Shi <bestswngs@gmail.com>
Link: https://patch.msgid.link/20260306160133.3852900-2-bestswngs@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Saves two function calls, and one stac/clac pair.
stac/clac is rather expensive on older cpus like Zen 2.
A synthetic network stress test gives a ~1.5% increase of pps
on AMD Zen 2.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Kuniyuki Iwashima <kuniyu@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core
Pull driver core fix from Danilo Krummrich:
- Revert "driver core: enforce device_lock for driver_match_device()":
When a device is already present in the system and a driver is
registered on the same bus, we iterate over all devices registered on
this bus to see if one of them matches. If we come across an already
bound one where the corresponding driver crashed while holding the
device lock (e.g. in probe()) we can't make any progress anymore.
Thus, revert and clarify that an implementer of struct bus_type must
not expect match() to be called with the device lock held.
* tag 'driver-core-7.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core:
Revert "driver core: enforce device_lock for driver_match_device()"
|
|
Commit c7159e960f14 ("usbnet: limit max_mtu based on device's hard_mtu")
capped net->max_mtu to the device's hard_mtu in usbnet_probe(). While
this correctly prevents oversized packets on standard USB network
devices, it breaks the qmi_wwan driver.
qmi_wwan relies on userspace (e.g. ModemManager) setting a large MTU on
the wwan0 interface to configure rx_urb_size via usbnet_change_mtu().
QMI modems negotiate USB transfer sizes of 16,383 or 32,767 bytes, and
the USB receive buffers must be sized accordingly. With max_mtu capped
to hard_mtu (~1500 bytes), userspace can no longer raise the MTU, the
receive buffers remain small, and download speeds drop from >300 Mbps
to ~0.8 Mbps.
Introduce a FLAG_NOMAXMTU driver flag that allows individual usbnet
drivers to opt out of the max_mtu cap. Set this flag in qmi_wwan's
driver_info structures to restore the previous behavior for QMI devices,
while keeping the safety fix in place for all other usbnet drivers.
Fixes: c7159e960f14 ("usbnet: limit max_mtu based on device's hard_mtu")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/lkml/CAPh3n803k8JcBPV5qEzUB-oKzWkAs-D5CU7z=Vd_nLRCr5ZqQg@mail.gmail.com/
Reported-by: Koen Vandeputte <koen.vandeputte@citymesh.com>
Tested-by: Daniele Palmas <dnlplm@gmail.com>
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Link: https://patch.msgid.link/20260304134338.1785002-1-lvivier@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull drm fixes from Dave Airlie:
"Weekly fixes pull.
There is one mm fix in here for a HMM livelock triggered by the xe
driver tests. Otherwise it's a pretty wide range of fixes across the
board, ttm UAF regression fix, amdgpu fixes, nouveau doesn't crash my
laptop anymore fix, and a fair bit of misc.
Seems about right for rc3.
mm:
- mm: Fix a hmm_range_fault() livelock / starvation problem
pagemap:
- Revert "drm/pagemap: Disable device-to-device migration"
ttm:
- fix function return breaking reclaim
- fix build failure on PREEMPT_RT
- fix bo->resource UAF
dma-buf:
- include ioctl.h in uapi header
sched:
- fix kernel doc warning
amdgpu:
- LUT fixes
- VCN5 fix
- Dispclk fix
- SMU 13.x fix
- Fix race in VM acquire
- PSP 15.x fix
- UserQ fix
amdxdna:
- fix invalid payload for failed command
- fix NULL ptr dereference
- fix major fw version check
- avoid inconsistent fw state on error
i915/display:
- Fix for Lenovo T14 G7 display not refreshing
xe:
- Do not preempt fence signaling CS instructions
- Some leak and finalization fixes
- Workaround fix
nouveau:
- avoid runtime suspend oops when using dp aux
panthor:
- fix gem_sync argument ordering
solomon:
- fix incorrect display output
renesas:
- fix DSI divider programming
ethosu:
- fix job submit error clean-up refcount
- fix NPU_OP_ELEMENTWISE validation
- handle possible underflows in IFM size calcs"
* tag 'drm-fixes-2026-03-07' of https://gitlab.freedesktop.org/drm/kernel: (38 commits)
accel: ethosu: Handle possible underflow in IFM size calculations
accel: ethosu: Fix NPU_OP_ELEMENTWISE validation with scalar
accel: ethosu: Fix job submit error clean-up refcount underflows
accel/amdxdna: Split mailbox channel create function
drm/panthor: Correct the order of arguments passed to gem_sync
Revert "drm/syncobj: Fix handle <-> fd ioctls with dirty stack"
drm/ttm: Fix bo resource use-after-free
nouveau/dpcd: return EBUSY for aux xfer if the device is asleep
accel/amdxdna: Fix major version check on NPU1 platform
drm/amdgpu/userq: refcount userqueues to avoid any race conditions
drm/amdgpu/userq: Consolidate wait ioctl exit path
drm/amdgpu/psp: Use Indirect access address for GFX to PSP mailbox
drm/amdgpu: Fix use-after-free race in VM acquire
drm/amd/pm: remove invalid gpu_metrics.energy_accumulator on smu v13.0.x
drm/xe: Fix memory leak in xe_vm_madvise_ioctl
drm/xe/reg_sr: Fix leak on xa_store failure
drm/xe/xe2_hpg: Correct implementation of Wa_16025250150
drm/xe/gsc: Fix GSC proxy cleanup on early initialization failure
Revert "drm/pagemap: Disable device-to-device migration"
drm/i915/psr: Fix for Panel Replay X granularity DPCD register handling
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Benjamin Tissoires:
- fix a few memory leaks (Günther Noack)
- fix potential kernel crashes in cmedia, creative-sb0540 and zydacron
(Greg Kroah-Hartman)
- fix NULL pointer dereference in pidff (Tomasz Pakuła)
- fix battery reporting for Apple Magic Trackpad 2 (Julius Lehmann)
- mcp2221 proper handling of failed read operation (Romain Sioen)
- various device quirks / device ID additions
* tag 'hid-for-linus-2026030601' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: mcp2221: cancel last I2C command on read error
HID: asus: add xg mobile 2023 external hardware support
HID: multitouch: Keep latency normal on deactivate for reactivation gesture
HID: apple: Add EPOMAKER TH87 to the non-apple keyboards list
HID: intel-ish-hid: ipc: Add Nova Lake-H/S PCI device IDs
selftests: hid: tests: test_wacom_generic: add tests for display devices and opaque devices
HID: multitouch: new class MT_CLS_EGALAX_P80H84
HID: magicmouse: fix battery reporting for Apple Magic Trackpad 2
HID: pidff: Fix condition effect bit clearing
HID: Add HID_CLAIMED_INPUT guards in raw_event callbacks missing them
HID: asus: avoid memory leak in asus_report_fixup()
HID: magicmouse: avoid memory leak in magicmouse_report_fixup()
HID: apple: avoid memory leak in apple_report_fixup()
HID: Document memory allocation properties of report_fixup()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Ilpo Järvinen:
- alienware-wmi-wmax: Add G-Mode support to m18 laptops
- asus-armoury: Add support for FA401UM, G733QS, GX650RX
- dell-wmi-sysman: Don't hex dump plaintext password data
- hp-bioscfg: Support large number of enumeration attributes
- hp-wmi: Add support for Omen 14-fb1xxx, 16-xd0xxx, 16-wf0xxx, and
Victus-d0xxx
- int3472: Handle GPIO type 0x10 (DOVDD)
- intel-hid:
- Add Dell 14 & 16 Plus 2-in-1 to dmi_vgbs_allow_list
- Enable 5-button array on ThinkPad X1 Fold 16 Gen 1
- mellanox: mlxreg: Fix kernel-doc warnings
- oxpec: Add support for OneXPlayer X1 Air, X1z, APEX, and Aokzoe A2
Pro
- redmi-wmi: Add more Fn hotkey mappings
- thinkpad_acpi: Fix errors reading battery thresholds
- touchscreen_dmi: Add quirk for y-inverted Goodix touchscreen on SUPI
S10
- uniwill-laptop:
- FN lock/super key lock attributes rename
- Fix crash on unexpected battery event
- A special key combination can alter FN lock status so mark it
volatile
- Handle FN lock event
* tag 'platform-drivers-x86-v7.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (27 commits)
platform/x86: dell-wmi-sysman: Don't hex dump plaintext password data
platform_data/mlxreg: mlxreg.h: fix all kernel-doc warnings
platform/x86: asus-armoury: add support for FA401UM
platform/x86: asus-armoury: add support for GX650RX
platform/x86: hp-bioscfg: Support allocations of larger data
platform/x86: oxpec: Add support for Aokzoe A2 Pro
platform/x86: oxpec: Add support for OneXPlayer X1 Air
platform/x86: oxpec: Add support for OneXPlayer X1z
platform/x86: oxpec: Add support for OneXPlayer APEX
platform/x86: uniwill-laptop: Handle FN lock event
platform/x86: uniwill-laptop: Mark FN lock status as being volatile
platform/x86: uniwill-laptop: Fix crash on unexpected battery event
platform/x86: uniwill-laptop: Rename FN lock and super key lock attrs
platform/x86: redmi-wmi: Add more hotkey mappings
platform/x86: alienware-wmi-wmax: Add G-Mode support to m18 laptops
platform/x86: hp-wmi: add Omen 14-fb1xxx (board 8E41) support
platform/x86: dell-wmi: Add audio/mic mute key codes
platform/x86: hp-wmi: Add Victus 16-d0xxx support
platform/x86: intel-hid: Enable 5-button array on ThinkPad X1 Fold 16 Gen 1
platform/x86: int3472: Handle GPIO type 0x10 (DOVDD)
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from CAN, netfilter and wireless.
Current release - new code bugs:
- sched: cake: fixup cake_mq rate adjustment for diffserv config
- wifi: fix missing ieee80211_eml_params member initialization
Previous releases - regressions:
- tcp: give up on stronger sk_rcvbuf checks (for now)
Previous releases - always broken:
- net: fix rcu_tasks stall in threaded busypoll
- sched:
- fq: clear q->band_pkt_count[] in fq_reset()
- only allow act_ct to bind to clsact/ingress qdiscs and shared
blocks
- bridge: check relevant per-VLAN options in VLAN range grouping
- xsk: fix fragment node deletion to prevent buffer leak
Misc:
- spring cleanup of inactive maintainers"
* tag 'net-7.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (138 commits)
xdp: produce a warning when calculated tailroom is negative
net: enetc: use truesize as XDP RxQ info frag_size
libeth, idpf: use truesize as XDP RxQ info frag_size
i40e: use xdp.frame_sz as XDP RxQ info frag_size
i40e: fix registering XDP RxQ info
ice: change XDP RxQ frag_size from DMA write length to xdp.frame_sz
ice: fix rxq info registering in mbuf packets
xsk: introduce helper to determine rxq->frag_size
xdp: use modulo operation to calculate XDP frag tailroom
selftests/tc-testing: Add tests exercising act_ife metalist replace behaviour
net/sched: act_ife: Fix metalist update behavior
selftests: net: add test for IPv4 route with loopback IPv6 nexthop
net: ipv6: fix panic when IPv4 route references loopback IPv6 nexthop
net: vxlan: fix nd_tbl NULL dereference when IPv6 is disabled
net: bridge: fix nd_tbl NULL dereference when IPv6 is disabled
MAINTAINERS: remove Thomas Falcon from IBM ibmvnic
MAINTAINERS: remove Claudiu Manoil and Alexandre Belloni from Ocelot switch
MAINTAINERS: replace Taras Chornyi with Elad Nachman for Marvell Prestera
MAINTAINERS: remove Jonathan Lemon from OpenCompute PTP
MAINTAINERS: replace Clark Wang with Frank Li for Freescale FEC
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix thresh_return of function graph tracer
The update to store data on the shadow stack removed the abuse of
using the task recursion word as a way to keep track of what
functions to ignore. The trace_graph_return() was updated to handle
this, but when function_graph tracer is using a threshold (only trace
functions that took longer than a specified time), it uses
trace_graph_thresh_return() instead.
This function was still incorrectly using the task struct recursion
word causing the function graph tracer to permanently set all
functions to "notrace"
- Fix thresh_return nosleep accounting
When the calltime was moved to the shadow stack storage instead of
being on the fgraph descriptor, the calculations for the amount of
sleep time was updated. The calculation was done in the
trace_graph_thresh_return() function, which also called the
trace_graph_return(), which did the calculation again, causing the
time to be doubled.
Remove the call to trace_graph_return() as what it needed to do
wasn't that much, and just do the work in
trace_graph_thresh_return().
- Fix syscall trace event activation on boot up
The syscall trace events are pseudo events attached to the
raw_syscall tracepoints. When the first syscall event is enabled, it
enables the raw_syscall tracepoint and doesn't need to do anything
when a second syscall event is also enabled.
When events are enabled via the kernel command line, syscall events
are partially enabled as the enabling is called before rcu_init. This
is due to allow early events to be enabled immediately. Because
kernel command line events do not distinguish between different types
of events, the syscall events are enabled here but are not fully
functioning. After rcu_init, they are disabled and re-enabled so that
they can be fully enabled.
The problem happened is that this "disable-enable" is done one at a
time. If more than one syscall event is specified on the command
line, by disabling them one at a time, the counter never gets to
zero, and the raw_syscall is not disabled and enabled, keeping the
syscall events in their non-fully functional state.
Instead, disable all events and re-enabled them all, as that will
ensure the raw_syscall event is also disabled and re-enabled.
- Disable preemption in ftrace pid filtering
The ftrace pid filtering attaches to the fork and exit tracepoints to
add or remove pids that should be traced. They access variables
protected by RCU (preemption disabled). Now that tracepoint callbacks
are called with preemption enabled, this protection needs to be added
explicitly, and not depend on the functions being called with
preemption disabled.
- Disable preemption in event pid filtering
The event pid filtering needs the same preemption disabling guards as
ftrace pid filtering.
- Fix accounting of the memory mapped ring buffer on fork
Memory mapping the ftrace ring buffer sets the vm_flags to DONTCOPY.
But this does not prevent the application from calling
madvise(MADVISE_DOFORK). This causes the mapping to be copied on
fork. After the first tasks exits, the mapping is considered unmapped
by everyone. But when he second task exits, the counter goes below
zero and triggers a WARN_ON.
Since nothing prevents two separate tasks from mmapping the ftrace
ring buffer (although two mappings may mess each other up), there's
no reason to stop the memory from being copied on fork.
Update the vm_operations to have an ".open" handler to update the
accounting and let the ring buffer know someone else has it mapped.
- Add all ftrace headers in MAINTAINERS file
The MAINTAINERS file only specifies include/linux/ftrace.h But misses
ftrace_irq.h and ftrace_regs.h. Make the file use wildcards to get
all *ftrace* files.
* tag 'trace-v7.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ftrace: Add MAINTAINERS entries for all ftrace headers
tracing: Fix WARN_ON in tracing_buffers_mmap_close
tracing: Disable preemption in the tracepoint callbacks handling filtered pids
ftrace: Disable preemption in the tracepoint callbacks handling filtered pids
tracing: Fix syscall events activation by ensuring refcount hits zero
fgraph: Fix thresh_return nosleeptime double-adjust
fgraph: Fix thresh_return clear per-task notrace
|
|
After acquiring netdev_queue::_xmit_lock the number of the CPU owning
the lock is recorded in netdev_queue::xmit_lock_owner. This works as
long as the BH context is not preemptible.
On PREEMPT_RT the softirq context is preemptible and without the
softirq-lock it is possible to have multiple user in __dev_queue_xmit()
submitting a skb on the same CPU. This is fine in general but this means
also that the current CPU is recorded as netdev_queue::xmit_lock_owner.
This in turn leads to the recursion alert and the skb is dropped.
Instead checking the for CPU number, that owns the lock, PREEMPT_RT can
check if the lockowner matches the current task.
Add netif_tx_owned() which returns true if the current context owns the
lock by comparing the provided CPU number with the recorded number. This
resembles the current check by negating the condition (the current check
returns true if the lock is not owned).
On PREEMPT_RT use rt_mutex_owner() to return the lock owner and compare
the current task against it.
Use the new helper in __dev_queue_xmit() and netif_local_xmit_active()
which provides a similar check.
Update comments regarding pairing READ_ONCE().
Reported-by: Bert Karwatzki <spasswolf@web.de>
Closes: https://lore.kernel.org/all/20260216134333.412332-1-spasswolf@web.de
Fixes: 3253cb49cbad4 ("softirq: Allow to drop the softirq-BKL lock on PREEMPT_RT")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reported-by: Bert Karwatzki <spasswolf@web.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://patch.msgid.link/20260302162631.uGUyIqDT@linutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
- kthread: consolidate kthread exit paths to prevent use-after-free
- iomap:
- don't mark folio uptodate if read IO has bytes pending
- don't report direct-io retries to fserror
- reject delalloc mappings during writeback
- ns: tighten visibility checks
- netfs: Fix unbuffered/DIO writes to dispatch subrequests in strict
sequence
* tag 'vfs-7.0-rc3.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
iomap: reject delalloc mappings during writeback
iomap: don't mark folio uptodate if read IO has bytes pending
selftests: fix mntns iteration selftests
nstree: tighten permission checks for listing
nsfs: tighten permission checks for handle opening
nsfs: tighten permission checks for ns iteration ioctls
netfs: Fix unbuffered/DIO writes to dispatch subrequests in strict sequence
kthread: consolidate kthread exit paths to prevent use-after-free
iomap: don't report direct-io retries to fserror
|
|
Eliminate kernel-doc warnings in mmu_notifier.h:
- add a missing struct short description
- use the correct format for function parameters
- add missing function return comment sections
Warning: include/linux/mmu_notifier.h:236 missing initial short
description on line: * struct mmu_interval_notifier_ops
Warning: include/linux/mmu_notifier.h:325 function parameter 'interval_sub'
not described in 'mmu_interval_set_seq'
Warning: include/linux/mmu_notifier.h:325 function parameter 'cur_seq'
not described in 'mmu_interval_set_seq'
Warning: include/linux/mmu_notifier.h:346 function parameter 'interval_sub'
not described in 'mmu_interval_read_retry'
Warning: include/linux/mmu_notifier.h:346 function parameter 'seq' not
described in 'mmu_interval_read_retry'
Warning: include/linux/mmu_notifier.h:346 No description found for return
value of 'mmu_interval_read_retry'
Warning: include/linux/mmu_notifier.h:370 function parameter 'interval_sub'
not described in 'mmu_interval_check_retry'
Warning: include/linux/mmu_notifier.h:370 function parameter 'seq' not
described in 'mmu_interval_check_retry'
Warning: include/linux/mmu_notifier.h:370 No description found for return
value of 'mmu_interval_check_retry'
Link: https://lkml.kernel.org/r/20260302005222.3470783-1-rdunlap@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Cc: David Hildenbrand <david@kernel.org>
Cc: "Liam R. Howlett" <Liam.Howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
