| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
[ Upstream commit fc47e86dbfb75a864c0c9dd8e78affb6506296bb ]
At the moment ip6_dst_lookup_tunnel() is used only by bareudp.
Ideally, other UDP tunnel implementations should use it, but to do so
the function needs to accept new parameters that are specific for UDP
tunnels, such as the ports.
Prepare for these changes by renaming the function to
udp_tunnel6_dst_lookup() and move it to file
net/ipv6/ip6_udp_tunnel.c.
This is similar to what already done for IPv4 in commit bf3fcbf7e7a0
("ipv4: rename and move ip_route_output_tunnel()").
Suggested-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Beniamino Galvani <b.galvani@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: aa6c6d9ee064 ("bareudp: fix NULL pointer dereference in bareudp_fill_metadata_dst()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 72fc68c6356b663a8763f02d9b0ec773d59a4949 ]
We want to make the function more generic so that it can be used by
other UDP tunnel implementations such as geneve and vxlan. To do that,
add the following arguments:
- source and destination UDP port;
- ifindex of the output interface, needed by vxlan;
- the tos, because in some cases it is not taken from struct
ip_tunnel_info (for example, when it's inherited from the inner
packet);
- the dst cache, because not all tunnel types (e.g. vxlan) want to
use the one from struct ip_tunnel_info.
With these parameters, the function no longer needs the full struct
ip_tunnel_info as argument and we can pass only the relevant part of
it (struct ip_tunnel_key).
Suggested-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Beniamino Galvani <b.galvani@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: aa6c6d9ee064 ("bareudp: fix NULL pointer dereference in bareudp_fill_metadata_dst()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 78f3655adcb52412275f282267ee771421731632 ]
The function is now UDP-specific, the protocol is always IPPROTO_UDP.
Suggested-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Beniamino Galvani <b.galvani@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: aa6c6d9ee064 ("bareudp: fix NULL pointer dereference in bareudp_fill_metadata_dst()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit bf3fcbf7e7a08015d3b169bad6281b29d45c272d ]
At the moment ip_route_output_tunnel() is used only by bareudp.
Ideally, other UDP tunnel implementations should use it, but to do so
the function needs to accept new parameters that are specific for UDP
tunnels, such as the ports.
Prepare for these changes by renaming the function to
udp_tunnel_dst_lookup() and move it to file
net/ipv4/udp_tunnel_core.c.
Suggested-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Beniamino Galvani <b.galvani@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: aa6c6d9ee064 ("bareudp: fix NULL pointer dereference in bareudp_fill_metadata_dst()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4516c873e3b55856012ddd6db9d4366ce3c60c5d ]
The variable "other" in the struct red_stats is not used. Remove it.
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: a8f5192809ca ("net/sched: sch_red: annotate data-races in red_dump_stats()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 5154561d9b119f781249f8e845fecf059b38b483 ]
pie_dump_stats() only runs with RTNL held,
reading fields that can be changed in qdisc fast path.
Add READ_ONCE()/WRITE_ONCE() annotations.
Alternative would be to acquire the qdisc spinlock, but our long-term
goal is to make qdisc dump operations lockless as much as we can.
tc_pie_xstats fields don't need to be latched atomically,
otherwise this bug would have been caught earlier.
Fixes: edb09eb17ed8 ("net: sched: do not acquire qdisc spinlock in qdisc/class stats dump")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20260421142944.4009941-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 46126db9c86110e5fc1e369b9bb89735ddefdae4 ]
Allow to dissect PPPoE specific fields which are:
- session ID (16 bits)
- ppp protocol (16 bits)
- type (16 bits) - this is PPPoE ethertype, for now only
ETH_P_PPP_SES is supported, possible ETH_P_PPP_DISC
in the future
The goal is to make the following TC command possible:
# tc filter add dev ens6f0 ingress prio 1 protocol ppp_ses \
flower \
pppoe_sid 12 \
ppp_proto ip \
action drop
Note that only PPPoE Session is supported.
Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com>
Acked-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Stable-dep-of: cc1ff87bce1c ("pppoe: drop PFC frames")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 34951fcf26c59e78ae430fba1fce7c08b1871249 ]
Our customers in the fiber telecom world have network configurations
where they would like to control their traffic according to the number
of tags appearing in the packet.
For example, TR247 GPON conformance test suite specification mostly
talks about untagged, single, double tagged packets and gives lax
guidelines on the vlan protocol vs. number of vlan tags.
This is different from the common IT networks where 802.1Q and 802.1ad
protocols are usually describe single and double tagged packet. GPON
configurations that we work with have arbitrary mix the above protocols
and number of vlan tags in the packet.
The goal is to make the following TC commands possible:
tc filter add dev eth1 ingress flower \
num_of_vlans 1 vlan_prio 5 action drop
From our logs, we have redirect rules such that:
tc filter add dev $GPON ingress flower num_of_vlans $N \
action mirred egress redirect dev $DEV
where N can range from 0 to 3 and $DEV is the function of $N.
Also there are rules setting skb mark based on the number of vlans:
tc filter add dev $GPON ingress flower num_of_vlans $N vlan_prio \
$P action skbedit mark $M
This new dissector allows extracting the number of vlan tags existing in
the packet.
Signed-off-by: Boris Sukholitko <boris.sukholitko@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: cc1ff87bce1c ("pppoe: drop PFC frames")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d5ad6ab61cbd89afdb60881f6274f74328af3ee9 ]
ieee80211_tx_prepare_skb() has three error paths, but only two of them
free the skb. The first error path (ieee80211_tx_prepare() returning
TX_DROP) does not free it, while invoke_tx_handlers() failure and the
fragmentation check both do.
Add kfree_skb() to the first error path so all three are consistent,
and remove the now-redundant frees in callers (ath9k, mt76,
mac80211_hwsim) to avoid double-free.
Document the skb ownership guarantee in the function's kdoc.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://patch.msgid.link/20260314065455.2462900-1-nbd@nbd.name
Fixes: 06be6b149f7e ("mac80211: add ieee80211_tx_prepare_skb() helper function")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
[ Exclude changes to drivers/net/wireless/mediatek/mt76/scan.c as this file is first
introduced by commit 31083e38548f("wifi: mt76: add code for emulating hardware scanning")
after linux-6.14.]
Signed-off-by: Li hongliang <1468888505@139.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit f8dca15a1b190787bbd03285304b569631160eda upstream.
nft_ct_timeout_obj_destroy() frees the timeout object with kfree()
immediately after nf_ct_untimeout(), without waiting for an RCU grace
period. Concurrent packet processing on other CPUs may still hold
RCU-protected references to the timeout object obtained via
rcu_dereference() in nf_ct_timeout_data().
Add an rcu_head to struct nf_ct_timeout and use kfree_rcu() to defer
freeing until after an RCU grace period, matching the approach already
used in nfnetlink_cttimeout.c.
KASAN report:
BUG: KASAN: slab-use-after-free in nf_conntrack_tcp_packet+0x1381/0x29d0
Read of size 4 at addr ffff8881035fe19c by task exploit/80
Call Trace:
nf_conntrack_tcp_packet+0x1381/0x29d0
nf_conntrack_in+0x612/0x8b0
nf_hook_slow+0x70/0x100
__ip_local_out+0x1b2/0x210
tcp_sendmsg_locked+0x722/0x1580
__sys_sendto+0x2d8/0x320
Allocated by task 75:
nft_ct_timeout_obj_init+0xf6/0x290
nft_obj_init+0x107/0x1b0
nf_tables_newobj+0x680/0x9c0
nfnetlink_rcv_batch+0xc29/0xe00
Freed by task 26:
nft_obj_destroy+0x3f/0xa0
nf_tables_trans_destroy_work+0x51c/0x5c0
process_one_work+0x2c4/0x5a0
Fixes: 7e0b2b57f01d ("netfilter: nft_ct: add ct timeout support")
Cc: stable@vger.kernel.org
Signed-off-by: Tuan Do <tuan@calif.io>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 5fac9b7c16c50c6c7699517f582b56e3743f453a ]
__NLA_IS_BEINT_TYPE(tp) isn't useful. NLA_BE16/32 are identical to
NLA_U16/32, the only difference is that it tells the netlink validation
functions that byteorder conversion might be needed before comparing
the value to the policy min/max ones.
After this change all policy macros that can be used with UINT types,
such as NLA_POLICY_MASK() can also be used with NLA_BE16/32.
This will be used to validate nf_tables flag attributes which
are in bigendian byte order.
Signed-off-by: Florian Westphal <fw@strlen.de>
Stable-dep-of: 8f15b5071b45 ("netfilter: ctnetlink: use netlink policy range checks")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ecaf75ffd5f5db320d8b1da0198eef5a5ce64a3f ]
Jakub reported that the addition of the "network_byte_order"
member in struct nla_policy increases size of 32bit platforms.
Instead of scraping the bit from elsewhere Johannes suggested
to add explicit NLA_BE types instead, so do this here.
NLA_POLICY_MAX_BE() macro is removed again, there is no need
for it: NLA_POLICY_MAX(NLA_BE.., ..) will do the right thing.
NLA_BE64 can be added later.
Fixes: 08724ef69907 ("netlink: introduce NLA_POLICY_MAX_BE")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Suggested-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20221031123407.9158-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 8f15b5071b45 ("netfilter: ctnetlink: use netlink policy range checks")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7354c9024f2835f6122ed9612e21ab379df050f9 ]
Mark the validation fields as private, users shouldn't set
them directly and they are too complicated to explain in
a more succinct way (there's already a long explanation
in the comment above).
The strict_start_type field is set directly and has a dedicated
comment so move that above the "private" section.
Link: https://lore.kernel.org/r/20221027212107.2639255-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 8f15b5071b45 ("netfilter: ctnetlink: use netlink policy range checks")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 08724ef69907214ce622344fe4945412e38368f0 ]
netlink allows to specify allowed ranges for integer types.
Unfortunately, nfnetlink passes integers in big endian, so the existing
NLA_POLICY_MAX() cannot be used.
At the moment, nfnetlink users, such as nf_tables, need to resort to
programmatic checking via helpers such as nft_parse_u32_check().
This is both cumbersome and error prone. This adds NLA_POLICY_MAX_BE
which adds range check support for BE16, BE32 and BE64 integers.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 8f15b5071b45 ("netfilter: ctnetlink: use netlink policy range checks")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 9df95785d3d8302f7c066050117b04cd3c2048c2 upstream.
Yiming Qian reports Use-after-free in the pipapo set type:
Under a large number of expired elements, commit-time GC can run for a very
long time in a non-preemptible context, triggering soft lockup warnings and
RCU stall reports (local denial of service).
We must split GC in an unlink and a reclaim phase.
We cannot queue elements for freeing until pointers have been swapped.
Expired elements are still exposed to both the packet path and userspace
dumpers via the live copy of the data structure.
call_rcu() does not protect us: dump operations or element lookups starting
after call_rcu has fired can still observe the free'd element, unless the
commit phase has made enough progress to swap the clone and live pointers
before any new reader has picked up the old version.
This a similar approach as done recently for the rbtree backend in commit
35f83a75529a ("netfilter: nft_set_rbtree: don't gc elements on insert").
Fixes: 3c4287f62044 ("nf_tables: Add set type for arbitrary concatenation of ranges")
Reported-by: Yiming Qian <yimingqian591@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David Krehwinkel <davidkrehwinkel@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit b3a6df291fecf5f8a308953b65ca72b7fc9e015d ]
When CONFIG_IPV6 is disabled, the udp_sock_create6() function returns 0
(success) without actually creating a socket. Callers such as
fou_create() then proceed to dereference the uninitialized socket
pointer, resulting in a NULL pointer dereference.
The captured NULL deref crash:
BUG: kernel NULL pointer dereference, address: 0000000000000018
RIP: 0010:fou_nl_add_doit (net/ipv4/fou_core.c:590 net/ipv4/fou_core.c:764)
[...]
Call Trace:
<TASK>
genl_family_rcv_msg_doit.constprop.0 (net/netlink/genetlink.c:1114)
genl_rcv_msg (net/netlink/genetlink.c:1194 net/netlink/genetlink.c:1209)
[...]
netlink_rcv_skb (net/netlink/af_netlink.c:2550)
genl_rcv (net/netlink/genetlink.c:1219)
netlink_unicast (net/netlink/af_netlink.c:1319 net/netlink/af_netlink.c:1344)
netlink_sendmsg (net/netlink/af_netlink.c:1894)
__sock_sendmsg (net/socket.c:727 (discriminator 1) net/socket.c:742 (discriminator 1))
__sys_sendto (./include/linux/file.h:62 (discriminator 1) ./include/linux/file.h:83 (discriminator 1) net/socket.c:2183 (discriminator 1))
__x64_sys_sendto (net/socket.c:2213 (discriminator 1) net/socket.c:2209 (discriminator 1) net/socket.c:2209 (discriminator 1))
do_syscall_64 (arch/x86/entry/syscall_64.c:63 (discriminator 1) arch/x86/entry/syscall_64.c:94 (discriminator 1))
entry_SYSCALL_64_after_hwframe (net/arch/x86/entry/entry_64.S:130)
This patch makes udp_sock_create6 return -EPFNOSUPPORT instead, so
callers correctly take their error paths. There is only one caller of
the vulnerable function and only privileged users can trigger it.
Fixes: fd384412e199b ("udp_tunnel: Seperate ipv6 functions into its own file.")
Reported-by: Weiming Shi <bestswngs@gmail.com>
Signed-off-by: Xiang Mei <xmei5@asu.edu>
Link: https://patch.msgid.link/20260317010241.1893893-1-xmei5@asu.edu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 62413a9c3cb183afb9bb6e94dd68caf4e4145f4c ]
The gate action can be replaced while the hrtimer callback or dump path is
walking the schedule list.
Convert the parameters to an RCU-protected snapshot and swap updates under
tcf_lock, freeing the previous snapshot via call_rcu(). When REPLACE omits
the entry list, preserve the existing schedule so the effective state is
unchanged.
Fixes: a51c328df310 ("net: qos: introduce a gate control flow action")
Cc: stable@vger.kernel.org
Signed-off-by: Paul Moses <p@1g4.org>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Link: https://patch.msgid.link/20260223150512.2251594-2-p@1g4.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[ Different function signatures, hrtimer changes, context ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 7accb1c4321acb617faf934af59d928b0b047e2b ]
This fixes responding with an invalid result caused by checking the
wrong size of CID which should have been (cmd_len - sizeof(*req)) and
on top of it the wrong result was use L2CAP_CR_LE_INVALID_PARAMS which
is invalid/reserved for reconf when running test like L2CAP/ECFC/BI-03-C:
> ACL Data RX: Handle 64 flags 0x02 dlen 14
LE L2CAP: Enhanced Credit Reconfigure Request (0x19) ident 2 len 6
MTU: 64
MPS: 64
Source CID: 64
< ACL Data TX: Handle 64 flags 0x00 dlen 10
LE L2CAP: Enhanced Credit Reconfigure Respond (0x1a) ident 2 len 2
! Result: Reserved (0x000c)
Result: Reconfiguration failed - one or more Destination CIDs invalid (0x0003)
Fiix L2CAP/ECFC/BI-04-C which expects L2CAP_RECONF_INVALID_MPS (0x0002)
when more than one channel gets its MPS reduced:
> ACL Data RX: Handle 64 flags 0x02 dlen 16
LE L2CAP: Enhanced Credit Reconfigure Request (0x19) ident 2 len 8
MTU: 264
MPS: 99
Source CID: 64
! Source CID: 65
< ACL Data TX: Handle 64 flags 0x00 dlen 10
LE L2CAP: Enhanced Credit Reconfigure Respond (0x1a) ident 2 len 2
! Result: Reconfiguration successful (0x0000)
Result: Reconfiguration failed - reduction in size of MPS not allowed for more than one channel at a time (0x0002)
Fix L2CAP/ECFC/BI-05-C when SCID is invalid (85 unconnected):
> ACL Data RX: Handle 64 flags 0x02 dlen 14
LE L2CAP: Enhanced Credit Reconfigure Request (0x19) ident 2 len 6
MTU: 65
MPS: 64
! Source CID: 85
< ACL Data TX: Handle 64 flags 0x00 dlen 10
LE L2CAP: Enhanced Credit Reconfigure Respond (0x1a) ident 2 len 2
! Result: Reconfiguration successful (0x0000)
Result: Reconfiguration failed - one or more Destination CIDs invalid (0x0003)
Fix L2CAP/ECFC/BI-06-C when MPS < L2CAP_ECRED_MIN_MPS (64):
> ACL Data RX: Handle 64 flags 0x02 dlen 14
LE L2CAP: Enhanced Credit Reconfigure Request (0x19) ident 2 len 6
MTU: 672
! MPS: 63
Source CID: 64
< ACL Data TX: Handle 64 flags 0x00 dlen 10
LE L2CAP: Enhanced Credit Reconfigure Respond (0x1a) ident 2 len 2
! Result: Reconfiguration failed - reduction in size of MPS not allowed for more than one channel at a time (0x0002)
Result: Reconfiguration failed - other unacceptable parameters (0x0004)
Fix L2CAP/ECFC/BI-07-C when MPS reduced for more than one channel:
> ACL Data RX: Handle 64 flags 0x02 dlen 16
LE L2CAP: Enhanced Credit Reconfigure Request (0x19) ident 3 len 8
MTU: 84
! MPS: 71
Source CID: 64
! Source CID: 65
< ACL Data TX: Handle 64 flags 0x00 dlen 10
LE L2CAP: Enhanced Credit Reconfigure Respond (0x1a) ident 2 len 2
! Result: Reconfiguration successful (0x0000)
Result: Reconfiguration failed - reduction in size of MPS not allowed for more than one channel at a time (0x0002)
Link: https://github.com/bluez/bluez/issues/1865
Fixes: 15f02b910562 ("Bluetooth: L2CAP: Add initial code for Enhanced Credit Based Mode")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 452a3eee22c57a5786ae6db5c97f3b0ec13bb3b7 ]
It is unlikely that this function will be ever called
with isk->inet_num being not zero.
Perform the check on isk->inet_num inside the locked section
for complete safety.
Fixes: 9b115749acb24 ("ipv6: add ip6_sock_set_v6only")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Fernando Fernandez Mancera <fmancera@suse.de>
Link: https://patch.msgid.link/20260216102202.3343588-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 21d033e472735ecec677f1ae46d6740b5e47a4f3 ]
After the optimization to only perform one GC per jiffy, a new problem
was introduced. If more than 8 new connections are tracked per jiffy the
list won't be cleaned up fast enough possibly reaching the limit
wrongly.
In order to prevent this issue, only skip the GC if it was already
triggered during the same jiffy and the increment is lower than the
clean up limit. In addition, increase the clean up limit to 64
connections to avoid triggering GC too often and do more effective GCs.
This has been tested using a HTTP server and several
performance tools while having nft_connlimit/xt_connlimit or OVS limit
configured.
Output of slowhttptest + OVS limit at 52000 connections:
slow HTTP test status on 340th second:
initializing: 0
pending: 432
connected: 51998
error: 0
closed: 0
service available: YES
Fixes: d265929930e2 ("netfilter: nf_conncount: reduce unnecessary GC")
Reported-by: Aleksandra Rukomoinikova <ARukomoinikova@k2.cloud>
Closes: https://lore.kernel.org/netfilter/b2064e7b-0776-4e14-adb6-c68080987471@k2.cloud/
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d2492688bb9fed6ab6e313682c387ae71a66ebae ]
syzbot reported the splat below [0] without a repro.
It indicates that struct nci_dev.cmd_wq had been destroyed before
nci_close_device() was called via rfkill.
nci_dev.cmd_wq is only destroyed in nci_unregister_device(), which
(I think) was called from virtual_ncidev_close() when syzbot close()d
an fd of virtual_ncidev.
The problem is that nci_unregister_device() destroys nci_dev.cmd_wq
first and then calls nfc_unregister_device(), which removes the
device from rfkill by rfkill_unregister().
So, the device is still visible via rfkill even after nci_dev.cmd_wq
is destroyed.
Let's unregister the device from rfkill first in nci_unregister_device().
Note that we cannot call nfc_unregister_device() before
nci_close_device() because
1) nfc_unregister_device() calls device_del() which frees
all memory allocated by devm_kzalloc() and linked to
ndev->conn_info_list
2) nci_rx_work() could try to queue nci_conn_info to
ndev->conn_info_list which could be leaked
Thus, nfc_unregister_device() is split into two functions so we
can remove rfkill interfaces only before nci_close_device().
[0]:
DEBUG_LOCKS_WARN_ON(1)
WARNING: kernel/locking/lockdep.c:238 at hlock_class kernel/locking/lockdep.c:238 [inline], CPU#0: syz.0.8675/6349
WARNING: kernel/locking/lockdep.c:238 at check_wait_context kernel/locking/lockdep.c:4854 [inline], CPU#0: syz.0.8675/6349
WARNING: kernel/locking/lockdep.c:238 at __lock_acquire+0x39d/0x2cf0 kernel/locking/lockdep.c:5187, CPU#0: syz.0.8675/6349
Modules linked in:
CPU: 0 UID: 0 PID: 6349 Comm: syz.0.8675 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/13/2026
RIP: 0010:hlock_class kernel/locking/lockdep.c:238 [inline]
RIP: 0010:check_wait_context kernel/locking/lockdep.c:4854 [inline]
RIP: 0010:__lock_acquire+0x3a4/0x2cf0 kernel/locking/lockdep.c:5187
Code: 18 00 4c 8b 74 24 08 75 27 90 e8 17 f2 fc 02 85 c0 74 1c 83 3d 50 e0 4e 0e 00 75 13 48 8d 3d 43 f7 51 0e 48 c7 c6 8b 3a de 8d <67> 48 0f b9 3a 90 31 c0 0f b6 98 c4 00 00 00 41 8b 45 20 25 ff 1f
RSP: 0018:ffffc9000c767680 EFLAGS: 00010046
RAX: 0000000000000001 RBX: 0000000000040000 RCX: 0000000000080000
RDX: ffffc90013080000 RSI: ffffffff8dde3a8b RDI: ffffffff8ff24ca0
RBP: 0000000000000003 R08: ffffffff8fef35a3 R09: 1ffffffff1fde6b4
R10: dffffc0000000000 R11: fffffbfff1fde6b5 R12: 00000000000012a2
R13: ffff888030338ba8 R14: ffff888030338000 R15: ffff888030338b30
FS: 00007fa5995f66c0(0000) GS:ffff8881256f8000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f7e72f842d0 CR3: 00000000485a0000 CR4: 00000000003526f0
Call Trace:
<TASK>
lock_acquire+0x106/0x330 kernel/locking/lockdep.c:5868
touch_wq_lockdep_map+0xcb/0x180 kernel/workqueue.c:3940
__flush_workqueue+0x14b/0x14f0 kernel/workqueue.c:3982
nci_close_device+0x302/0x630 net/nfc/nci/core.c:567
nci_dev_down+0x3b/0x50 net/nfc/nci/core.c:639
nfc_dev_down+0x152/0x290 net/nfc/core.c:161
nfc_rfkill_set_block+0x2d/0x100 net/nfc/core.c:179
rfkill_set_block+0x1d2/0x440 net/rfkill/core.c:346
rfkill_fop_write+0x461/0x5a0 net/rfkill/core.c:1301
vfs_write+0x29a/0xb90 fs/read_write.c:684
ksys_write+0x150/0x270 fs/read_write.c:738
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xe2/0xf80 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7fa59b39acb9
Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 e8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007fa5995f6028 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 00007fa59b615fa0 RCX: 00007fa59b39acb9
RDX: 0000000000000008 RSI: 0000200000000080 RDI: 0000000000000007
RBP: 00007fa59b408bf7 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 00007fa59b616038 R14: 00007fa59b615fa0 R15: 00007ffc82218788
</TASK>
Fixes: 6a2968aaf50c ("NFC: basic NCI protocol implementation")
Reported-by: syzbot+f9c5fd1a0874f9069dce@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/695e7f56.050a0220.1c677c.036c.GAE@google.com/
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260127040411.494931-1-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit be102eb6a0e7c03db00e50540622f4e43b2d2844 ]
When using nf_conncount infrastructure for non-confirmed connections a
duplicated track is possible due to an optimization introduced since
commit d265929930e2 ("netfilter: nf_conncount: reduce unnecessary GC").
In order to fix this introduce a new conncount API that receives
directly an sk_buff struct. It fetches the tuple and zone and the
corresponding ct from it. It comes with both existing conncount variants
nf_conncount_count_skb() and nf_conncount_add_skb(). In addition remove
the old API and adjust all the users to use the new one.
This way, for each sk_buff struct it is possible to check if there is a
ct present and already confirmed. If so, skip the add operation.
Fixes: d265929930e2 ("netfilter: nf_conncount: reduce unnecessary GC")
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Stable-dep-of: 69894e5b4c5e ("netfilter: nft_connlimit: update the count if add was skipped")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d265929930e2ffafc744c0ae05fb70acd53be1ee ]
Currently nf_conncount can trigger garbage collection (GC)
at multiple places. Each GC process takes a spin_lock_bh
to traverse the nf_conncount_list. We found that when testing
port scanning use two parallel nmap, because the number of
connection increase fast, the nf_conncount_count and its
subsequent call to __nf_conncount_add take too much time,
causing several CPU lockup. This happens when user set the
conntrack limit to +20,000, because the larger the limit,
the longer the list that GC has to traverse.
The patch mitigate the performance issue by avoiding unnecessary
GC with a timestamp. Whenever nf_conncount has done a GC,
a timestamp is updated, and beforce the next time GC is
triggered, we make sure it's more than a jiffies.
By doin this we can greatly reduce the CPU cycles and
avoid the softirq lockup.
To reproduce it in OVS,
$ ovs-appctl dpctl/ct-set-limits zone=1,limit=20000
$ ovs-appctl dpctl/ct-get-limits
At another machine, runs two nmap
$ nmap -p1- <IP>
$ nmap -p1- <IP>
Signed-off-by: William Tu <u9012063@gmail.com>
Co-authored-by: Yifeng Sun <pkusunyifeng@gmail.com>
Reported-by: Greg Rose <gvrose8192@gmail.com>
Suggested-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Stable-dep-of: 69894e5b4c5e ("netfilter: nft_connlimit: update the count if add was skipped")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1532ed0d0753c83e72595f785f82b48c28bbe5dc ]
Since ehash lookups are lockless, if one CPU performs a lookup while
another concurrently deletes and inserts (removing reqsk and inserting sk),
the lookup may fail to find the socket, an RST may be sent.
The call trace map is drawn as follows:
CPU 0 CPU 1
----- -----
inet_ehash_insert()
spin_lock()
sk_nulls_del_node_init_rcu(osk)
__inet_lookup_established()
(lookup failed)
__sk_nulls_add_node_rcu(sk, list)
spin_unlock()
As both deletion and insertion operate on the same ehash chain, this patch
introduces a new sk_nulls_replace_node_init_rcu() helper functions to
implement atomic replacement.
Fixes: 5e0724d027f0 ("tcp/dccp: fix hashdance race for passive sessions")
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Signed-off-by: Xuanqiang Luo <luoxuanqiang@kylinos.cn>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20251015020236.431822-3-xuanqiang.luo@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2a198bbec6913ae1c90ec963750003c6213668c7 ]
This reverts commit f75a2804da391571563c4b6b29e7797787332673.
With all states (whether user or kern) removed from the hashtables
during deletion, there's no need for synchronous destruction of
states. xfrm6_tunnel states still need to have been destroyed (which
will be the case when its last user is deleted (not destroyed)) so
that xfrm6_tunnel_free_spi removes it from the per-netns hashtable
before the netns is destroyed.
This has the benefit of skipping one synchronize_rcu per state (in
__xfrm_state_destroy(sync=true)) when we exit a netns.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b441cf3f8c4b8576639d20c8eb4aa32917602ecd ]
The ipcomp fallback tunnels currently get deleted (from the various
lists and hashtables) as the last user state that needed that fallback
is destroyed (not deleted). If a reference to that user state still
exists, the fallback state will remain on the hashtables/lists,
triggering the WARN in xfrm_state_fini. Because of those remaining
references, the fix in commit f75a2804da39 ("xfrm: destroy xfrm_state
synchronously on net exit path") is not complete.
We recently fixed one such situation in TCP due to defered freeing of
skbs (commit 9b6412e6979f ("tcp: drop secpath at the same time as we
currently drop dst")). This can also happen due to IP reassembly: skbs
with a secpath remain on the reassembly queue until netns
destruction. If we can't guarantee that the queues are flushed by the
time xfrm_state_fini runs, there may still be references to a (user)
xfrm_state, preventing the timely deletion of the corresponding
fallback state.
Instead of chasing each instance of skbs holding a secpath one by one,
this patch fixes the issue directly within xfrm, by deleting the
fallback state as soon as the last user state depending on it has been
deleted. Destruction will still happen when the final reference is
dropped.
A separate lockdep class for the fallback state is required since
we're going to lock x->tunnel while x is locked.
Fixes: 9d4139c76905 ("netns xfrm: per-netns xfrm_state_all list")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c15d5c62ab313c19121f10e25d4fec852bd1c40c ]
When a netdev issues a RX async resync request for a TLS connection,
the TLS module handles it by logging record headers and attempting to
match them to the tcp_sn provided by the device. If a match is found,
the TLS module approves the tcp_sn for resynchronization.
While waiting for a device response, the TLS module also increments
rcd_delta each time a new TLS record is received, tracking the distance
from the original resync request.
However, if the device response is delayed or fails (e.g due to
unstable connection and device getting out of tracking, hardware
errors, resource exhaustion etc.), the TLS module keeps logging and
incrementing, which can lead to a WARN() when rcd_delta exceeds the
threshold.
To address this, introduce tls_offload_rx_resync_async_request_cancel()
to explicitly cancel resync requests when a device response failure is
detected. Call this helper also as a final safeguard when rcd_delta
crosses its threshold, as reaching this point implies that earlier
cancellation did not occur.
Signed-off-by: Shahar Shitrit <shshitrit@nvidia.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1761508983-937977-3-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f9d31c4cf4c11ff10317f038b9c6f7c3bda6cdd4 ]
The same fix in commit 5ec7d18d1813 ("sctp: use call_rcu to free endpoint")
is also needed for dumping one asoc and sock after the lookup.
Fixes: 86fdb3448cc1 ("sctp: ensure ep is not destroyed before doing the dump")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: f1fc201148c7 ("sctp: Hold sock lock while iterating over address list")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 66048f8b3cc7e462953c04285183cdee43a1cb89 ]
During recent testing with the netem qdisc to inject delays into TCP
traffic, we observed that our CLS BPF program failed to function correctly
due to incorrect classid retrieval from task_get_classid(). The issue
manifests in the following call stack:
bpf_get_cgroup_classid+5
cls_bpf_classify+507
__tcf_classify+90
tcf_classify+217
__dev_queue_xmit+798
bond_dev_queue_xmit+43
__bond_start_xmit+211
bond_start_xmit+70
dev_hard_start_xmit+142
sch_direct_xmit+161
__qdisc_run+102 <<<<< Issue location
__dev_xmit_skb+1015
__dev_queue_xmit+637
neigh_hh_output+159
ip_finish_output2+461
__ip_finish_output+183
ip_finish_output+41
ip_output+120
ip_local_out+94
__ip_queue_xmit+394
ip_queue_xmit+21
__tcp_transmit_skb+2169
tcp_write_xmit+959
__tcp_push_pending_frames+55
tcp_push+264
tcp_sendmsg_locked+661
tcp_sendmsg+45
inet_sendmsg+67
sock_sendmsg+98
sock_write_iter+147
vfs_write+786
ksys_write+181
__x64_sys_write+25
do_syscall_64+56
entry_SYSCALL_64_after_hwframe+100
The problem occurs when multiple tasks share a single qdisc. In such cases,
__qdisc_run() may transmit skbs created by different tasks. Consequently,
task_get_classid() retrieves an incorrect classid since it references the
current task's context rather than the skb's originating task.
Given that dev_queue_xmit() always executes with bh disabled, we can use
softirq_count() instead to obtain the correct classid.
The simple steps to reproduce this issue:
1. Add network delay to the network interface:
such as: tc qdisc add dev bond0 root netem delay 1.5ms
2. Build two distinct net_cls cgroups, each with a network-intensive task
3. Initiate parallel TCP streams from both tasks to external servers.
Under this specific condition, the issue reliably occurs. The kernel
eventually dequeues an SKB that originated from Task-A while executing in
the context of Task-B.
It is worth noting that it will change the established behavior for a
slightly different scenario:
<sock S is created by task A>
<class ID for task A is changed>
<skb is created by sock S xmit and classified>
prior to this patch the skb will be classified with the 'new' task A
classid, now with the old/original one. The bpf_get_cgroup_classid_curr()
function is a more appropriate choice for this case.
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Thomas Graf <tgraf@suug.ch>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20250902062933.30087-1-laoar.shao@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 21f82062d0f241e55dd59eb630e8710862cc90b4 ]
An exchange with a NFC target must complete within NCI_DATA_TIMEOUT.
A delay of 700 ms is not sufficient for cryptographic operations on smart
cards. CardOS 6.0 may need up to 1.3 seconds to perform 256-bit ECDH
or 3072-bit RSA. To prevent brute-force attacks, passports and similar
documents introduce even longer delays into access control protocols
(BAC/PACE).
The timeout should be higher, but not too much. The expiration allows
us to detect that a NFC target has disappeared.
Signed-off-by: Juraj Šarinay <juraj@sarinay.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250902113630.62393-1-juraj@sarinay.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit dd831ac8221e691e9e918585b1003c7071df0379 upstream.
To prevent a potential crash in agg_dequeue (net/sched/sch_qfq.c)
when cl->qdisc->ops->peek(cl->qdisc) returns NULL, we check the return
value before using it, similar to the existing approach in sch_hfsc.c.
To avoid code duplication, the following changes are made:
1. Changed qdisc_warn_nonwc(include/net/pkt_sched.h) into a static
inline function.
2. Moved qdisc_peek_len from net/sched/sch_hfsc.c to
include/net/pkt_sched.h so that sch_qfq can reuse it.
3. Applied qdisc_peek_len in agg_dequeue to avoid crashing.
Signed-off-by: Xiang Mei <xmei5@asu.edu>
Reviewed-by: Cong Wang <xiyou.wangcong@gmail.com>
Link: https://patch.msgid.link/20250705212143.3982664-1-xmei5@asu.edu
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit a6cec0bcd34264be8887791594be793b3f12719f ]
Add a new rtnl flag (RTNL_FLAG_BULK_DEL_SUPPORTED) which is used to
verify that the delete operation allows bulk object deletion. Also emit
a warning if anyone tries to set it for non-delete kind.
Suggested-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: bf29555f5bdc ("rtnetlink: Allow deleting FDB entries in user namespace")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0569e31f1bc2f50613ba4c219f3ecc0d1174d841 ]
Use BIT to define flag values.
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: bf29555f5bdc ("rtnetlink: Allow deleting FDB entries in user namespace")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2e9ea3e30f696fd438319c07836422bb0bbb4608 ]
Add a helper which extracts the msg type's kind using the kind mask (0x3).
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: bf29555f5bdc ("rtnetlink: Allow deleting FDB entries in user namespace")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 12dc5c2cb7b269c5a1c6d02844f40bfce942a7a6 ]
Add rtnl kind names instead of using raw values. We'll need to
check for DEL kind later to validate bulk flag support.
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: bf29555f5bdc ("rtnetlink: Allow deleting FDB entries in user namespace")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 21f4d45eba0b2dcae5dbc9e5e0ad08735c993f16 ]
Similarly to ipv4 tunnel, ipv6 version updates dev->needed_headroom, too.
While ipv4 tunnel headroom adjustment growth was limited in
commit 5ae1e9922bbd ("net: ip_tunnel: prevent perpetual headroom growth"),
ipv6 tunnel yet increases the headroom without any ceiling.
Reflect ipv4 tunnel headroom adjustment limit on ipv6 version.
Credits to Francesco Ruggeri, who was originally debugging this issue
and wrote local Arista-specific patch and a reproducer.
Fixes: 8eb30be0352d ("ipv6: Create ip6_tnl_xmit")
Cc: Florian Westphal <fw@strlen.de>
Cc: Francesco Ruggeri <fruggeri05@gmail.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Link: https://patch.msgid.link/20251009-ip6_tunnel-headroom-v2-1-8e4dbd8f7e35@arista.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 732d167bf5f53a8c1e8c53cf7dbffe2a13f63752 ]
Emit a notification in the nexthop notification chain when a new nexthop
is added (not replaced). The nexthop can either be a new group or a
single nexthop.
The notification is sent after the nexthop is inserted into the
red-black tree, as listeners might need to callback into the nexthop
code with the nexthop ID in order to mark the nexthop as offloaded.
A 'REPLACE' notification is emitted instead of 'ADD' as the distinction
between the two is not important for in-kernel listeners. In case the
listener is not familiar with the encoded nexthop ID, it can simply
treat it as a new one. This is also consistent with the route offload
AP |
