| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
It can be debated how much benefit definition of vlan ids for dibs devices
brings, as the dmbs are accessible only by a single peer anyhow. But ism
provides vlan support and smcd exploits it, so move it to dibs layer as an
optional feature.
smcd_loopback simply ignores all vlan settings, do the same in
dibs_loopback.
SMC-D and ISM have a method to use the invalid VLAN ID 1FFF
(ISM_RESERVED_VLANID), to indicate that both communication peers support
routable SMC-Dv2. Tolerate it in dibs, but move it to SMC only.
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Link: https://patch.msgid.link/20250918110500.1731261-12-wintera@linux.ibm.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Define a uuid_t GID attribute to identify a dibs device.
SMC uses 64 Bit and 128 Bit Global Identifiers (GIDs) per device, that
need to be sent via the SMC protocol. Because the smc code uses integers,
network endianness and host endianness need to be considered. Avoid this
in the dibs layer by using uuid_t byte arrays. Future patches could change
SMC to use uuid_t. For now conversion helper functions are introduced.
ISM devices provide 64 Bit GIDs. Map them to dibs uuid_t GIDs like this:
_________________________________________
| 64 Bit ISM-vPCI GID | 00000000_00000000 |
-----------------------------------------
If interpreted as UUID [1], this would be interpreted as the UIID variant,
that is reserved for NCS backward compatibility. So it will not collide
with UUIDs that were generated according to the standard.
smc_loopback already uses version 4 UUIDs as 128 Bit GIDs, move that to
dibs loopback. A temporary change to smc_lo_query_rgid() is required,
that will be moved to dibs_loopback with a follow-on patch.
Provide gid of a dibs device as sysfs read-only attribute.
Link: https://datatracker.ietf.org/doc/html/rfc4122 [1]
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Julian Ruess <julianr@linux.ibm.com>
Reviewed-by: Mahanta Jambigi <mjambigi@linux.ibm.com>
Link: https://patch.msgid.link/20250918110500.1731261-11-wintera@linux.ibm.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Move struct device from ism_dev and smc_lo_dev to dibs_dev, and define a
corresponding release function. Free ism_dev in ism_remove() and smc_lo_dev
in smc_lo_dev_remove().
Replace smcd->ops->get_dev(smcd) by using dibs->dev directly.
An alternative design would be to embed dibs_dev as a field in ism_dev and
do the same for other dibs device driver specific structs. However that
would have the disadvantage that each dibs device driver needs to allocate
dibs_dev and each dibs device driver needs a different device release
function. The advantage would be that ism_dev and other device driver
specific structs would be covered by device reference counts.
Signed-off-by: Julian Ruess <julianr@linux.ibm.com>
Co-developed-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Mahanta Jambigi <mjambigi@linux.ibm.com>
Link: https://patch.msgid.link/20250918110500.1731261-9-wintera@linux.ibm.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Move the device add() and remove() functions from ism_client to
dibs_client_ops and call add_dev()/del_dev() for ism devices and
dibs_loopback devices. dibs_client_ops->add_dev() = smcd_register_dev() for
the smc_dibs_client. This is the first step to handle ism and loopback
devices alike (as dibs devices) in the smc dibs client.
Define dibs_dev->ops and move smcd_ops->get_chid to
dibs_dev_ops->get_fabric_id() for ism and loopback devices. See below for
why this needs to be in the same patch as dibs_client_ops->add_dev().
The following changes contain intermediate steps, that will be obsoleted by
follow-on patches, once more functionality has been moved to dibs:
Use different smcd_ops and max_dmbs for ism and loopback. Follow-on patches
will change SMC-D to directly use dibs_ops instead of smcd_ops.
In smcd_register_dev() it is now necessary to identify a dibs_loopback
device before smcd_dev and smcd_ops->get_chid() are available. So provide
dibs_dev_ops->get_fabric_id() in this patch and evaluate it in
smc_ism_is_loopback().
Call smc_loopback_init() in smcd_register_dev() and call
smc_loopback_exit() in smcd_unregister_dev() to handle the functionality
that is still in smc_loopback. Follow-on patches will move all smc_loopback
code to dibs_loopback.
In smcd_[un]register_dev() use only ism device name, this will be replaced
by dibs device name by a follow-on patch.
End of changes with intermediate parts.
Allocate an smcd event workqueue for all dibs devices, although
dibs_loopback does not generate events.
Use kernel memory instead of devres memory for smcd_dev and smcd->conn.
Since commit a72178cfe855 ("net/smc: Fix dependency of SMC on ISM") an ism
device and its driver can have a longer lifetime than the smc module, so
smc should not rely on devres to free its resources [1]. It is now the
responsibility of the smc client to free smcd and smcd->conn for all dibs
devices, ism devices as well as loopback. Call client->ops->del_dev() for
all existing dibs devices in dibs_unregister_client(), so all device
related structures can be freed in the client.
When dibs_unregister_client() is called in the context of smc_exit() or
smc_core_reboot_event(), these functions have already called
smc_lgrs_shutdown() which calls smc_smcd_terminate_all(smcd) and sets
going_away. This is done a second time in smcd_unregister_dev(). This is
analogous to how smcr is handled in these functions, by calling first
smc_lgrs_shutdown() and then smc_ib_unregister_client() >
smc_ib_remove_dev(), so leave it that way. It may be worth investigating,
whether smc_lgrs_shutdown() is still required or useful.
Remove CONFIG_SMC_LO. CONFIG_DIBS_LO now controls whether a dibs loopback
device exists or not.
Link: https://www.kernel.org/doc/Documentation/driver-model/devres.txt [1]
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Mahanta Jambigi <mjambigi@linux.ibm.com>
Link: https://patch.msgid.link/20250918110500.1731261-8-wintera@linux.ibm.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
smcd_buf_free() calls smc_ism_unregister_dmb(lgr->smcd, buf_desc) and
then unconditionally frees buf_desc.
Remove the cleaning up of fields of buf_desc in
smc_ism_unregister_dmb(), because it is not helpful.
This removes the only usage of ISM_ERROR from the smc module. So move it
to drivers/s390/net/ism.h.
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Mahanta Jambigi <mjambigi@linux.ibm.com>
Reviewed-by: Dust Li <dust.li@linux.alibaba.com>
Link: https://patch.msgid.link/20250918110500.1731261-2-wintera@linux.ibm.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Today, once an inet_bind_bucket enters a state where fastreuse >= 0 or
fastreuseport >= 0 after a socket is explicitly bound to a port, it remains
in that state until all sockets are removed and the bucket is destroyed.
In this state, the bucket is skipped during ephemeral port selection in
connect(). For applications using a reduced ephemeral port
range (IP_LOCAL_PORT_RANGE socket option), this can cause faster port
exhaustion since blocked buckets are excluded from reuse.
The reason the bucket state isn't updated on port release is unclear.
Possibly a performance trade-off to avoid scanning bucket owners, or just
an oversight.
Fix it by recalculating the bucket state when a socket releases a port. To
limit overhead, each inet_bind2_bucket stores its own (fastreuse,
fastreuseport) state. On port release, only the relevant port-addr bucket
is scanned, and the overall state is derived from these.
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250917-update-bind-bucket-state-on-unhash-v5-1-57168b661b47@cloudflare.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
synflood_warned had to be u32 for xchg(), but ensuring
atomicity is not really needed.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250919204856.2977245-9-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
sk->sk_sndbuf is read-mostly in tx path, so move it from
sock_write_tx group to more appropriate sock_read_tx.
sk->sk_err_soft was not identified previously, but
is used from tcp_ack().
Move it to sock_write_tx group for better cache locality.
Also change tcp_ack() to clear sk->sk_err_soft only if needed.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250919204856.2977245-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
sk_uid and sk_protocol are read from inet6_csk_route_socket()
for each TCP transmit.
Also read from udpv6_sendmsg(), udp_sendmsg() and others.
Move them to sock_read_tx for better cache locality.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250919204856.2977245-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
inet_hash() and inet6_hash() are exactly the same.
Also, we do not need to export inet6_hash().
Let's consolidate the two into __inet_hash() and rename it to inet_hash().
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250919083706.1863217-3-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
__inet_hash() is called from inet_hash() and inet6_hash with osk NULL.
Let's remove the 2nd arg from __inet_hash().
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250919083706.1863217-2-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
These were used by S1G for older chandef representation, but
are no longer needed. Clean them up, even if we can't drop
them from the userspace API entirely.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
This fixes the following UFA in hci_acl_create_conn_sync where a
connection still pending is command submission (conn->state == BT_OPEN)
maybe freed, also since this also can happen with the likes of
hci_le_create_conn_sync fix it as well:
BUG: KASAN: slab-use-after-free in hci_acl_create_conn_sync+0x5ef/0x790 net/bluetooth/hci_sync.c:6861
Write of size 2 at addr ffff88805ffcc038 by task kworker/u11:2/9541
CPU: 1 UID: 0 PID: 9541 Comm: kworker/u11:2 Not tainted 6.16.0-rc7 #3 PREEMPT(full)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
Workqueue: hci3 hci_cmd_sync_work
Call Trace:
<TASK>
dump_stack_lvl+0x189/0x250 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:378 [inline]
print_report+0xca/0x230 mm/kasan/report.c:480
kasan_report+0x118/0x150 mm/kasan/report.c:593
hci_acl_create_conn_sync+0x5ef/0x790 net/bluetooth/hci_sync.c:6861
hci_cmd_sync_work+0x210/0x3a0 net/bluetooth/hci_sync.c:332
process_one_work kernel/workqueue.c:3238 [inline]
process_scheduled_works+0xae1/0x17b0 kernel/workqueue.c:3321
worker_thread+0x8a0/0xda0 kernel/workqueue.c:3402
kthread+0x70e/0x8a0 kernel/kthread.c:464
ret_from_fork+0x3fc/0x770 arch/x86/kernel/process.c:148
ret_from_fork_asm+0x1a/0x30 home/kwqcheii/source/fuzzing/kernel/kasan/linux-6.16-rc7/arch/x86/entry/entry_64.S:245
</TASK>
Allocated by task 123736:
kasan_save_stack mm/kasan/common.c:47 [inline]
kasan_save_track+0x3e/0x80 mm/kasan/common.c:68
poison_kmalloc_redzone mm/kasan/common.c:377 [inline]
__kasan_kmalloc+0x93/0xb0 mm/kasan/common.c:394
kasan_kmalloc include/linux/kasan.h:260 [inline]
__kmalloc_cache_noprof+0x230/0x3d0 mm/slub.c:4359
kmalloc_noprof include/linux/slab.h:905 [inline]
kzalloc_noprof include/linux/slab.h:1039 [inline]
__hci_conn_add+0x233/0x1b30 net/bluetooth/hci_conn.c:939
hci_conn_add_unset net/bluetooth/hci_conn.c:1051 [inline]
hci_connect_acl+0x16c/0x4e0 net/bluetooth/hci_conn.c:1634
pair_device+0x418/0xa70 net/bluetooth/mgmt.c:3556
hci_mgmt_cmd+0x9c9/0xef0 net/bluetooth/hci_sock.c:1719
hci_sock_sendmsg+0x6ca/0xef0 net/bluetooth/hci_sock.c:1839
sock_sendmsg_nosec net/socket.c:712 [inline]
__sock_sendmsg+0x219/0x270 net/socket.c:727
sock_write_iter+0x258/0x330 net/socket.c:1131
new_sync_write fs/read_write.c:593 [inline]
vfs_write+0x54b/0xa90 fs/read_write.c:686
ksys_write+0x145/0x250 fs/read_write.c:738
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Freed by task 103680:
kasan_save_stack mm/kasan/common.c:47 [inline]
kasan_save_track+0x3e/0x80 mm/kasan/common.c:68
kasan_save_free_info+0x46/0x50 mm/kasan/generic.c:576
poison_slab_object mm/kasan/common.c:247 [inline]
__kasan_slab_free+0x62/0x70 mm/kasan/common.c:264
kasan_slab_free include/linux/kasan.h:233 [inline]
slab_free_hook mm/slub.c:2381 [inline]
slab_free mm/slub.c:4643 [inline]
kfree+0x18e/0x440 mm/slub.c:4842
device_release+0x9c/0x1c0
kobject_cleanup lib/kobject.c:689 [inline]
kobject_release lib/kobject.c:720 [inline]
kref_put include/linux/kref.h:65 [inline]
kobject_put+0x22b/0x480 lib/kobject.c:737
hci_conn_cleanup net/bluetooth/hci_conn.c:175 [inline]
hci_conn_del+0x8ff/0xcb0 net/bluetooth/hci_conn.c:1173
hci_conn_complete_evt+0x3c7/0x1040 net/bluetooth/hci_event.c:3199
hci_event_func net/bluetooth/hci_event.c:7477 [inline]
hci_event_packet+0x7e0/0x1200 net/bluetooth/hci_event.c:7531
hci_rx_work+0x46a/0xe80 net/bluetooth/hci_core.c:4070
process_one_work kernel/workqueue.c:3238 [inline]
process_scheduled_works+0xae1/0x17b0 kernel/workqueue.c:3321
worker_thread+0x8a0/0xda0 kernel/workqueue.c:3402
kthread+0x70e/0x8a0 kernel/kthread.c:464
ret_from_fork+0x3fc/0x770 arch/x86/kernel/process.c:148
ret_from_fork_asm+0x1a/0x30 home/kwqcheii/source/fuzzing/kernel/kasan/linux-6.16-rc7/arch/x86/entry/entry_64.S:245
Last potentially related work creation:
kasan_save_stack+0x3e/0x60 mm/kasan/common.c:47
kasan_record_aux_stack+0xbd/0xd0 mm/kasan/generic.c:548
insert_work+0x3d/0x330 kernel/workqueue.c:2183
__queue_work+0xbd9/0xfe0 kernel/workqueue.c:2345
queue_delayed_work_on+0x18b/0x280 kernel/workqueue.c:2561
pairing_complete+0x1e7/0x2b0 net/bluetooth/mgmt.c:3451
pairing_complete_cb+0x1ac/0x230 net/bluetooth/mgmt.c:3487
hci_connect_cfm include/net/bluetooth/hci_core.h:2064 [inline]
hci_conn_failed+0x24d/0x310 net/bluetooth/hci_conn.c:1275
hci_conn_complete_evt+0x3c7/0x1040 net/bluetooth/hci_event.c:3199
hci_event_func net/bluetooth/hci_event.c:7477 [inline]
hci_event_packet+0x7e0/0x1200 net/bluetooth/hci_event.c:7531
hci_rx_work+0x46a/0xe80 net/bluetooth/hci_core.c:4070
process_one_work kernel/workqueue.c:3238 [inline]
process_scheduled_works+0xae1/0x17b0 kernel/workqueue.c:3321
worker_thread+0x8a0/0xda0 kernel/workqueue.c:3402
kthread+0x70e/0x8a0 kernel/kthread.c:464
ret_from_fork+0x3fc/0x770 arch/x86/kernel/process.c:148
ret_from_fork_asm+0x1a/0x30 home/kwqcheii/source/fuzzing/kernel/kasan/linux-6.16-rc7/arch/x86/entry/entry_64.S:245
Fixes: aef2aa4fa98e ("Bluetooth: hci_event: Fix creating hci_conn object on error status")
Reported-by: Junvyyang, Tencent Zhuque Lab <zhuque@tencent.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
udp_v4_early_demux already returns drop reasons as it either returns 0
or ip_mc_validate_source, which itself returns drop reasons. Its return
value is also already used as a drop reason itself.
Makes this explicit by making it return drop reasons.
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250915091958.15382-2-atenart@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
assoc_drv_spc is the size of psp_assoc.drv_data[].
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250918192539.1587586-1-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Using flags to check sk_state only makes sense to check for a subset
of states in parallel e.g. sk_fullsock(). We are not doing that
here. Compare for individual states directly.
Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com>
Link: https://patch.msgid.link/20250918155205.2197603-4-daniel.zahka@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
It is weird to cast to a timewait_sock before checking sk_state, even
if the use is after such a check. Remove the tw local variable, and
use inet_twsk() directly in the timewait branch.
Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com>
Link: https://patch.msgid.link/20250918155205.2197603-3-daniel.zahka@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This function does not need a mutable reference to its argument.
Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com>
Link: https://patch.msgid.link/20250918155205.2197603-2-daniel.zahka@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Stop accessing ns.count directly.
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Every namespace type has a container_of(ns, <ns_type>, ns) static inline
function that is currently not exposed in the header. So we have a bunch
of places that open-code it via container_of(). Move it to the headers
so we can use it directly.
Reviewed-by: Aleksa Sarai <cyphar@cyphar.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
With the introduction of proper S1G channel flags, this function is no
longer used. Remove it.
Signed-off-by: Lachlan Hodges <lachlan.hodges@morsemicro.com>
Link: https://patch.msgid.link/20250918051913.500781-4-lachlan.hodges@morsemicro.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Currently, the S1G channelisation implementation differs from that of
VHT, which is the PHY that S1G is based on. The major difference between
the clock rate is 1/10th of VHT. However how their channelisation is
represented within cfg80211 and mac80211 vastly differ.
To rectify this, remove the use of IEEE80211_CHAN_1/2/4.. flags that were
previously used to indicate the control channel width, however it should be
implied that the control channels are 1MHz in the case of S1G. Additionally,
introduce the invert - being IEEE80211_CHAN_NO_4/8/16MHz - that imply
the control channel may not be used for a certain bandwidth. With these
new flags, we can perform regulatory and chandef validation just as we would
for VHT.
To deal with the notion that S1G PHYs may contain a 2MHz primary channel,
introduce a new variable, s1g_primary_2mhz, which indicates whether we are
operating on a 2MHz primary channel. In this case, the chandef::chan points to
the 1MHz primary channel pointed to by the primary channel location. Alongside
this, introduce some new helper routines that can extract the sibling 1MHz
channel. The sibling being the alternate 1MHz primary subchannel within the
2MHz primary channel that is not pointed to by chandef::chan.
Furthermore, due to unique restrictions imposed on S1G PHYs, introduce
a new flag, IEEE80211_CHAN_S1G_NO_PRIMARY, which states that the 1MHz channel
cannot be used as a primary channel. This is assumed to be set by vendors
as it is hardware and regdom specific, When we validate a 2MHz primary channel,
we need to ensure both 1MHz subchannels do not contain this flag. If one or
both of the 1MHz subchannels contain this flag then the 2MHz primary is not
permitted for use as a primary channel.
Properly integrate S1G channel validation such that it is implemented
according with other PHY types such as VHT. Additionally, implement a new
S1G-specific regulatory flag to allow cfg80211 to understand specific
vendor requirements for S1G PHYs.
Signed-off-by: Arien Judge <arien.judge@morsemicro.com>
Signed-off-by: Andrew Pope <andrew.pope@morsemicro.com>
Signed-off-by: Lachlan Hodges <lachlan.hodges@morsemicro.com>
Link: https://patch.msgid.link/20250918051913.500781-2-lachlan.hodges@morsemicro.com
[remove redundant NL80211_ATTR_S1G_PRIMARY_2MHZ check]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
So it can be used by drivers to check if NAN Device interface
is started or not.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250908140015.c69652f77eb6.Ie4f3d197e0706e742e3d97614fadc11b22adfbc6@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Add support for sending management frame over a NAN Device
interface:
- Declare support for the supported management frames types.
- Since action frame transmissions over a NAN Device interface
do not necessarily require a channel configuration, e.g., they
can be transmitted during DW, modify the Tx path to avoid
accessing channel information for NAN Device interface.
- In addition modify the points in the Tx path logic to account
for cases that a band is not specified in the Tx information.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250908140015.23b160089228.I65a58af753bcbcfb5c4ad8ef372d546f889725ba@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
When the driver indicates that the device has joined
a cluster, store the cluster ID. This is needed for data
path operations, e.g., filtering received frames etc.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250908140015.63e9fef2a3aa.I6c858185c9e71f84bd2c5174d7ee45902b4391c3@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Allow drivers to specify the supported NAN capabilities and support
advertising the NAN capabilities to user space.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250908140015.2976966556f5.Ic6e43b10049573180c909dad806f279cfb31143e@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The drivers should notify upper layers and user space when a NAN device
joins a cluster. This is needed, for example, to set the correct addr3
in SDF frames. Add API to report cluster join event.
Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250908140015.ad27b7b6e4d9.I70b213a2a49f18d1ba2ad325e67e8eff51cc7a1f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
This notification will be used by the device to inform user space
about upcoming DW. When received, user space will be able to prepare
multicast Service Discovery Frames (SDFs) to be transmitted during the
next DW using %NL80211_CMD_FRAME command on the NAN management interface.
The device/driver will take care to transmit the frames in the correct
timing. This allows to implement a synchronized Discovery Engine (DE)
in user space, if the device doesn't support DE offload.
Note that this notification can be sent before the actual DW starts as
long as the driver/device handles the actual timing of the SDF
transmission.
Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250908140015.0e1d15031bab.I5b1721e61b63910452b3c5cdcdc1e94cb094d4c9@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Current NAN APIs have only basic configuration for master
preference and operating bands. Add and parse additional parameters
which provide more control over NAN synchronization. The newly added
attributes allow to publish additional NAN attributes and vendor
elements in NAN beacons, control scan and discovery beacons
periodicity, enable/disable DW notifications etc.
Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
tested: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250908140015.a4779492bf8e.I375feb919bd72358173766b9fe10010c40796b33@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Cross-merge networking fixes after downstream PR (net-6.17-rc7).
No conflicts.
Adjacent changes:
drivers/net/ethernet/mellanox/mlx5/core/en/fs.h
9536fbe10c9d ("net/mlx5e: Add PSP steering in local NIC RX")
7601a0a46216 ("net/mlx5e: Add a miss level for ipsec crypto offload")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Andrei Vagin reported that blamed commit broke CRIU.
Indeed, while we want to keep sk_uid unchanged when a socket
is cloned, we want to clear sk->sk_ino.
Otherwise, sock_diag might report multiple sockets sharing
the same inode number.
Move the clearing part from sock_orphan() to sk_set_socket(sk, NULL),
called both from sock_orphan() and sk_clone_lock().
Fixes: 5d6b58c932ec ("net: lockless sock_i_ino()")
Closes: https://lore.kernel.org/netdev/aMhX-VnXkYDpKd9V@google.com/
Closes: https://github.com/checkpoint-restore/criu/issues/2744
Reported-by: Andrei Vagin <avagin@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Andrei Vagin <avagin@google.com>
Link: https://patch.msgid.link/20250917135337.1736101-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Daniel Zahka says:
==================
add basic PSP encryption for TCP connections
This is v13 of the PSP RFC [1] posted by Jakub Kicinski one year
ago. General developments since v1 include a fork of packetdrill [2]
with support for PSP added, as well as some test cases, and an
implementation of PSP key exchange and connection upgrade [3]
integrated into the fbthrift RPC library. Both [2] and [3] have been
tested on server platforms with PSP-capable CX7 NICs. Below is the
cover letter from the original RFC:
Add support for PSP encryption of TCP connections.
PSP is a protocol out of Google:
https://github.com/google/psp/blob/main/doc/PSP_Arch_Spec.pdf
which shares some similarities with IPsec. I added some more info
in the first patch so I'll keep it short here.
The protocol can work in multiple modes including tunneling.
But I'm mostly interested in using it as TLS replacement because
of its superior offload characteristics. So this patch does three
things:
- it adds "core" PSP code
PSP is offload-centric, and requires some additional care and
feeding, so first chunk of the code exposes device info.
This part can be reused by PSP implementations in xfrm, tunneling etc.
- TCP integration TLS style
Reuse some of the existing concepts from TLS offload, such as
attaching crypto state to a socket, marking skbs as "decrypted",
egress validation. PSP does not prescribe key exchange protocols.
To use PSP as a more efficient TLS offload we intend to perform
a TLS handshake ("inline" in the same TCP connection) and negotiate
switching to PSP based on capabilities of both endpoints.
This is also why I'm not including a software implementation.
Nobody would use it in production, software TLS is faster,
it has larger crypto records.
- mlx5 implementation
That's mostly other people's work, not 100% sure those folks
consider it ready hence the RFC in the title. But it works :)
Not posted, queued a branch [4] are follow up pieces:
- standard stats
- netdevsim implementation and tests
[1] https://lore.kernel.org/netdev/20240510030435.120935-1-kuba@kernel.org/
[2] https://github.com/danieldzahka/packetdrill
[3] https://github.com/danieldzahka/fbthrift/tree/dzahka/psp
[4] https://github.com/kuba-moo/linux/tree/psp
Comments we intend to defer to future series:
- we prefer to keep the version field in the tx-assoc netlink
request, because it makes parsing keys require less state early
on, but we are willing to change in the next version of this
series.
- using a static branch to wrap psp_enqueue_set_decrypted() and
other functions called from tcp.
- using INDIRECT_CALL for tls/psp in sk_validate_xmit_skb(). We
prefer to address this in a dedicated patch series, so that this
series does not need to modify the way tls_validate_xmit_skb() is
declared and stubbed out.
v12: https://lore.kernel.org/netdev/20250916000559.1320151-1-kuba@kernel.org/
v11: https://lore.kernel.org/20250911014735.118695-1-daniel.zahka@gmail.com
v10: https://lore.kernel.org/netdev/20250828162953.2707727-1-daniel.zahka@gmail.com/
v9: https://lore.kernel.org/netdev/20250827155340.2738246-1-daniel.zahka@gmail.com/
v8: https://lore.kernel.org/netdev/20250825200112.1750547-1-daniel.zahka@gmail.com/
v7: https://lore.kernel.org/netdev/20250820113120.992829-1-daniel.zahka@gmail.com/
v6: https://lore.kernel.org/netdev/20250812003009.2455540-1-daniel.zahka@gmail.com/
v5: https://lore.kernel.org/netdev/20250723203454.519540-1-daniel.zahka@gmail.com/
v4: https://lore.kernel.org/netdev/20250716144551.3646755-1-daniel.zahka@gmail.com/
v3: https://lore.kernel.org/netdev/20250702171326.3265825-1-daniel.zahka@gmail.com/
v2: https://lore.kernel.org/netdev/20250625135210.2975231-1-daniel.zahka@gmail.com/
v1: https://lore.kernel.org/netdev/20240510030435.120935-1-kuba@kernel.org/
==================
Links: https://patch.msgid.link/20250917000954.859376-1-daniel.zahka@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
---
* add-basic-psp-encryption-for-tcp-connections:
net/mlx5e: Implement PSP key_rotate operation
net/mlx5e: Add Rx data path offload
psp: provide decapsulation and receive helper for drivers
net/mlx5e: Configure PSP Rx flow steering rules
net/mlx5e: Add PSP steering in local NIC RX
net/mlx5e: Implement PSP Tx data path
psp: provide encapsulation helper for drivers
net/mlx5e: Implement PSP operations .assoc_add and .assoc_del
net/mlx5e: Support PSP offload functionality
psp: track generations of device key
net: psp: update the TCP MSS to reflect PSP packet overhead
net: psp: add socket security association code
net: tcp: allow tcp_timewait_sock to validate skbs before handing to device
net: move sk_validate_xmit_skb() to net/core/dev.c
psp: add op for rotation of device key
tcp: add datapath logic for PSP with inline key exchange
net: modify core data structures for PSP datapath support
psp: base PSP device support
psp: add documentation
|
|
Create psp_dev_rcv(), which drivers can call to psp decapsulate and attach
a psp_skb_ext to an skb.
psp_dev_rcv() only supports what the PSP architecture specification
refers to as "transport mode" packets, where the L3 header is either
IPv6 or IPv4.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Co-developed-by: Daniel Zahka <daniel.zahka@gmail.com>
Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250917000954.859376-18-daniel.zahka@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Create a new function psp_encapsulate(), which takes a TCP packet and
PSP encapsulates it according to the "Transport Mode Packet Format"
section of the PSP Architecture Specification.
psp_encapsulate() does not push a PSP trailer onto the skb. Both IPv6
and IPv4 are supported. Virtualization cookie is not included.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Co-developed-by: Daniel Zahka <daniel.zahka@gmail.com>
Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250917000954.859376-14-daniel.zahka@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
There is a (somewhat theoretical in absence of multi-host support)
possibility that another entity will rotate the key and we won't
know. This may lead to accepting packets with matching SPI but
which used different crypto keys than we expected.
The PSP Architecture specification mentions that an implementation
should track device key generation when device keys are managed by the
NIC. Some PSP implementations may opt to include this key generation
state in decryption metadata each time a device key is used to decrypt
a packet. If that is the case, that key generation counter can also be
used when policy checking a decrypted skb against a psp_assoc. This is
an optional feature that is not explicitly part of the PSP spec, but
can provide additional security in the case where an attacker may have
the ability to force key rotations faster than rekeying can occur.
Since we're tracking "key generations" more explicitly now,
maintain different lists for associations from different generations.
This way we can catch stale associations (the user space should
listen to rotation notifications and change the keys).
Drivers can "opt out" of generation tracking by setting
the generation value to 0.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250917000954.859376-11-daniel.zahka@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
PSP eats 40B of header space. Adjust MSS appropriately.
We can either modify tcp_mtu_to_mss() / tcp_mss_to_mtu()
or reuse icsk_ext_hdr_len. The former option is more TCP
specific and has runtime overhead. The latter is a bit
of a hack as PSP is not an ext_hdr. If one squints hard
enough, UDP encap is just a more practical version of
IPv6 exthdr, so go with the latter. Happy to change.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250917000954.859376-10-daniel.zahka@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add the ability to install PSP Rx and Tx crypto keys on TCP
connections. Netlink ops are provided for both operations.
Rx side combines allocating a new Rx key and installing it
on the socket. Theoretically these are separate actions,
but in practice they will always be used one after the
other. We can add distinct "alloc" and "install" ops later.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Co-developed-by: Daniel Zahka <daniel.zahka@gmail.com>
Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250917000954.859376-9-daniel.zahka@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Provide a callback to validate skb's originating from tcp timewait
socks before passing to the device layer. Full socks have a
sk_validate_xmit_skb member for checking that a device is capable of
performing offloads required for transmitting an skb. With psp, tcp
timewait socks will inherit the crypto state from their corresponding
full socks. Any ACKs or RSTs that originate from a tcp timewait sock
carrying psp state should be psp encapsulated.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250917000954.859376-8-daniel.zahka@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Move definition of sk_validate_xmit_skb() from net/core/sock.c to
net/core/dev.c.
This change is in preparation of the next patch, where
sk_validate_xmit_skb() will need to cast sk to a tcp_timewait_sock *,
and access member fields. Including linux/tcp.h from linux/sock.h
creates a circular dependency, and dev.c is the only current call site
of this function.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250917000954.859376-7-daniel.zahka@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Rotating the device key is a key part of the PSP protocol design.
Some external daemon needs to do it once a day, or so.
Add a netlink op to perform this operation.
Add a notification group for informing users that key has been
rotated and they should rekey (next rotation will cut them off).
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250917000954.859376-6-daniel.zahka@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add validation points and state propagation to support PSP key
exchange inline, on TCP connections. The expectation is that
application will use some well established mechanism like TLS
handshake to establish a secure channel over the connection and
if both endpoints are PSP-capable - exchange and install PSP keys.
Because the connection can existing in PSP-unsecured and PSP-secured
state we need to make sure that there are no race conditions or
retransmission leaks.
On Tx - mark packets with the skb->decrypted bit when PSP key
is at the enqueue time. Drivers should only encrypt packets with
this bit set. This prevents retransmissions getting encrypted when
original transmission was not. Similarly to TLS, we'll use
sk->sk_validate_xmit_skb to make sure PSP skbs can't "escape"
via a PSP-unaware device without being encrypted.
On Rx - validation is done under socket lock. This moves the validation
point later than xfrm, for example. Please see the documentation patch
for more details on the flow of securing a connection, but for
the purpose of this patch what's important is that we want to
enforce the invariant that once connection is secured any skb
in the receive queue has been encrypted with PSP.
Add GRO and coalescing checks to prevent PSP authenticated data from
being combined with cleartext data, or data with non-matching PSP
state. On Rx, check skb's with psp_skb_coalesce_diff() at points
before psp_sk_rx_policy_check(). After skb's are policy checked and on
the socket receive queue, skb_cmp_decrypted() is sufficient for
checking for coalescable PSP state. On Tx, tcp_write_collapse_fence()
should be called when transitioning a socket into PSP Tx state to
prevent data sent as cleartext from being coalesced with PSP
encapsulated data.
This change only adds the validation points, for ease of review.
Subsequent change will add the ability to install keys, and flesh
the enforcement logic out
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Co-developed-by: Daniel Zahka <daniel.zahka@gmail.com>
Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250917000954.859376-5-daniel.zahka@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add pointers to psp data structures to core networking structs,
and an SKB extension to carry the PSP information from the drivers
to the socket layer.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Co-developed-by: Daniel Zahka <daniel.zahka@gmail.com>
Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250917000954.859376-4-daniel.zahka@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add a netlink family for PSP and allow drivers to register |
