| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
commit a663bac71a2f0b3ac6c373168ca57b2a6e6381aa upstream.
From the MCTP Base specification (DSP0236 v1.2.1), the first byte of
the MCTP header contains a 4 bit reserved field, and 4 bit version.
On our current receive path, we require those 4 reserved bits to be
zero, but the 9500-8i card is non-conformant, and may set these
reserved bits.
DSP0236 states that the reserved bits must be written as zero, and
ignored when read. While the device might not conform to the former,
we should accept these message to conform to the latter.
Relax our check on the MCTP version byte to allow non-zero bits in the
reserved field.
Fixes: 889b7da23abf ("mctp: Add initial routing framework")
Signed-off-by: Yuan Zhaoming <yuanzm2@lenovo.com>
Cc: stable@vger.kernel.org
Acked-by: Jeremy Kerr <jk@codeconstruct.com.au>
Link: https://patch.msgid.link/20260417141340.5306-1-yuanzhaoming901030@126.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit dbeb256e8dd87233d891b170c0b32a6466467036 upstream.
When an RSS QP is destroyed (e.g. DPDK exit), mana_ib_destroy_qp_rss()
destroys the RX WQ objects but does not disable vPort RX steering in
firmware. This leaves stale steering configuration that still points to
the destroyed RX objects.
If traffic continues to arrive (e.g. peer VM is still transmitting) and
the VF interface is subsequently brought up (mana_open), the firmware
may deliver completions using stale CQ IDs from the old RX objects.
These CQ IDs can be reused by the ethernet driver for new TX CQs,
causing RX completions to land on TX CQs:
WARNING: mana_poll_tx_cq+0x1b8/0x220 [mana] (is_sq == false)
WARNING: mana_gd_process_eq_events+0x209/0x290 (cq_table lookup fails)
Fix this by disabling vPort RX steering before destroying RX WQ objects.
Note that mana_fence_rqs() cannot be used here because the fence
completion is delivered on the CQ, which is polled by user-mode (e.g.
DPDK) and not visible to the kernel driver.
Refactor the disable logic into a shared mana_disable_vport_rx() in
mana_en, exported for use by mana_ib, replacing the duplicate code.
The ethernet driver's mana_dealloc_queues() is also updated to call
this common function.
Fixes: 0266a177631d ("RDMA/mana_ib: Add a driver for Microsoft Azure Network Adapter")
Cc: stable@vger.kernel.org
Signed-off-by: Long Li <longli@microsoft.com>
Link: https://patch.msgid.link/20260325194100.1929056-1-longli@microsoft.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
"The kernfs rbtree is keyed by (hash, ns, name) where the hash
is seeded with the raw namespace pointer via init_name_hash(ns).
The resulting hash values are exposed to userspace through
readdir seek positions, and the pointer-based ordering in
kernfs_name_compare() is observable through entry order.
Switch from raw pointers to ns_common::ns_id for both hashing
and comparison.
A preparatory commit first replaces all const void * namespace
parameters with const struct ns_common * throughout kernfs, sysfs,
and kobject so the code can access ns->ns_id. Also compare the
ns_id when hashes match in the rbtree to handle crafted collisions.
Also fix eventpoll RCU grace period issue and a cachefiles refcount
problem"
* tag 'vfs-7.0-rc8.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
kernfs: make directory seek namespace-aware
kernfs: use namespace id instead of pointer for hashing and comparison
kernfs: pass struct ns_common instead of const void * for namespace tags
eventpoll: defer struct eventpoll free to RCU grace period
cachefiles: fix incorrect dentry refcount in cachefiles_cull()
|
|
kernfs has historically used const void * to pass around namespace tags
used for directory-level namespace filtering. The only current user of
this is sysfs network namespace tagging where struct net pointers are
cast to void *.
Replace all const void * namespace parameters with const struct
ns_common * throughout the kernfs, sysfs, and kobject namespace layers.
This includes the kobj_ns_type_operations callbacks, kobject_namespace(),
and all sysfs/kernfs APIs that accept or return namespace tags.
Passing struct ns_common is needed because various codepaths require
access to the underlying namespace. A struct ns_common can always be
converted back to the concrete namespace type (e.g., struct net) via
container_of() or to_ns_common() in the reverse direction.
This is a preparatory change for switching to ns_id-based directory
iteration to prevent a KASLR pointer leak through the current use of
raw namespace pointers as hash seeds and comparison keys.
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Sharing a global hash table among all queues is tempting, but
it can cause crash:
BUG: KASAN: slab-use-after-free in nfqnl_recv_verdict+0x11ac/0x15e0 [nfnetlink_queue]
[..]
nfqnl_recv_verdict+0x11ac/0x15e0 [nfnetlink_queue]
nfnetlink_rcv_msg+0x46a/0x930
kmem_cache_alloc_node_noprof+0x11e/0x450
struct nf_queue_entry is freed via kfree, but parallel cpu can still
encounter such an nf_queue_entry when walking the list.
Alternative fix is to free the nf_queue_entry via kfree_rcu() instead,
but as we have to alloc/free for each skb this will cause more mem
pressure.
Cc: Scott Mitchell <scott.k.mitch1@gmail.com>
Fixes: e19079adcd26 ("netfilter: nfnetlink_queue: optimize verdict lookup with hash table")
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
nft_ct_timeout_obj_destroy() frees the timeout object with kfree()
immediately after nf_ct_untimeout(), without waiting for an RCU grace
period. Concurrent packet processing on other CPUs may still hold
RCU-protected references to the timeout object obtained via
rcu_dereference() in nf_ct_timeout_data().
Add an rcu_head to struct nf_ct_timeout and use kfree_rcu() to defer
freeing until after an RCU grace period, matching the approach already
used in nfnetlink_cttimeout.c.
KASAN report:
BUG: KASAN: slab-use-after-free in nf_conntrack_tcp_packet+0x1381/0x29d0
Read of size 4 at addr ffff8881035fe19c by task exploit/80
Call Trace:
nf_conntrack_tcp_packet+0x1381/0x29d0
nf_conntrack_in+0x612/0x8b0
nf_hook_slow+0x70/0x100
__ip_local_out+0x1b2/0x210
tcp_sendmsg_locked+0x722/0x1580
__sys_sendto+0x2d8/0x320
Allocated by task 75:
nft_ct_timeout_obj_init+0xf6/0x290
nft_obj_init+0x107/0x1b0
nf_tables_newobj+0x680/0x9c0
nfnetlink_rcv_batch+0xc29/0xe00
Freed by task 26:
nft_obj_destroy+0x3f/0xa0
nf_tables_trans_destroy_work+0x51c/0x5c0
process_one_work+0x2c4/0x5a0
Fixes: 7e0b2b57f01d ("netfilter: nft_ct: add ct timeout support")
Cc: stable@vger.kernel.org
Signed-off-by: Tuan Do <tuan@calif.io>
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
Currently xp_assign_dev_shared() is missing XDP_USE_SG being propagated
to flags so set it in order to preserve mtu check that is supposed to be
done only when no multi-buffer setup is in picture.
Also, this flag has the same value as XDP_UMEM_TX_SW_CSUM so we could
get unexpected SG setups for software Tx checksums. Since csum flag is
UAPI, modify value of XDP_UMEM_SG_FLAG.
Fixes: d609f3d228a8 ("xsk: add multi-buffer support for sockets sharing umem")
Reviewed-by: Björn Töpel <bjorn@kernel.org>
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://patch.msgid.link/20260402154958.562179-4-maciej.fijalkowski@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Multi-buffer XDP stores information about frags in skb_shared_info that
sits at the tailroom of a packet. The storage space is reserved via
xdp_data_hard_end():
((xdp)->data_hard_start + (xdp)->frame_sz - \
SKB_DATA_ALIGN(sizeof(struct skb_shared_info)))
and then we refer to it via macro below:
static inline struct skb_shared_info *
xdp_get_shared_info_from_buff(const struct xdp_buff *xdp)
{
return (struct skb_shared_info *)xdp_data_hard_end(xdp);
}
Currently we do not respect this tailroom space in multi-buffer AF_XDP
ZC scenario. To address this, introduce xsk_pool_get_tailroom() and use
it within xsk_pool_get_rx_frame_size() which is used in ZC drivers to
configure length of HW Rx buffer.
Typically drivers on Rx Hw buffers side work on 128 byte alignment so
let us align the value returned by xsk_pool_get_rx_frame_size() in order
to avoid addressing this on driver's side. This addresses the fact that
idpf uses mentioned function *before* pool->dev being set so we were at
risk that after subtracting tailroom we would not provide 128-byte
aligned value to HW.
Since xsk_pool_get_rx_frame_size() is actively used in xsk_rcv_check()
and __xsk_rcv(), add a variant of this routine that will not include 128
byte alignment and therefore old behavior is preserved.
Reviewed-by: Björn Töpel <bjorn@kernel.org>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Fixes: 24ea50127ecf ("xsk: support mbuf on ZC RX")
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://patch.msgid.link/20260402154958.562179-3-maciej.fijalkowski@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In configurations with multiple tunnel layers and MPLS lwtunnel routing, a
single tunnel hop can increment the counter beyond this limit. This causes
packets to be dropped with the "Dead loop on virtual device" message even
when a routing loop doesn't exist.
Increase IP_TUNNEL_RECURSION_LIMIT from 4 to 5 to handle this use-case.
Fixes: 6f1a9140ecda ("net: add xmit recursion limit to tunnel xmit functions")
Link: https://lore.kernel.org/netdev/88deb91b-ef1b-403c-8eeb-0f971f27e34f@redhat.com/
Signed-off-by: Chris J Arges <carges@cloudflare.com>
Link: https://patch.msgid.link/20260402222401.3408368-1-carges@cloudflare.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The RCU-protected codepaths (mpls_forward, mpls_dump_routes) can have
an inconsistent view of platform_labels vs platform_label in case of a
concurrent resize (resize_platform_label_table, under
platform_mutex). This can lead to OOB accesses.
This patch adds a seqcount, so that we get a consistent snapshot.
Note that mpls_label_ok is also susceptible to this, so the check
against RTA_DST in rtm_to_route_config, done outside platform_mutex,
is not sufficient. This value gets passed to mpls_label_ok once more
in both mpls_route_add and mpls_route_del, so there is no issue, but
that additional check must not be removed.
Reported-by: Yuan Tan <tanyuan98@outlook.com>
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Fixes: 7720c01f3f590 ("mpls: Add a sysctl to control the size of the mpls label table")
Fixes: dde1b38e873c ("mpls: Convert mpls_dump_routes() to RCU.")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://patch.msgid.link/cd8fca15e3eb7e212b094064cd83652e20fd9d31.1774284088.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
__nf_ct_expect_find() and nf_ct_expect_find_get() are called under
rcu_read_lock() but they dereference the master conntrack via
exp->master.
Since the expectation does not hold a reference on the master conntrack,
this could be dying conntrack or different recycled conntrack than the
real master due to SLAB_TYPESAFE_RCU.
Store the netns, the master_tuple and the zone in struct
nf_conntrack_expect as a safety measure.
This patch is required by the follow up fix not to dump expectations
that do not belong to this netns.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Holding reference on the expectation is not sufficient, the master
conntrack object can just go away, making exp->master invalid.
To access exp->master safely:
- Grab the nf_conntrack_expect_lock, this gets serialized with
clean_from_lists() which also holds this lock when the master
conntrack goes away.
- Hold reference on master conntrack via nf_conntrack_find_get().
Not so easy since the master tuple to look up for the master conntrack
is not available in the existing problematic paths.
This patch goes for extending the nf_conntrack_expect_lock section
to address this issue for simplicity, in the cases that are described
below this is just slightly extending the lock section.
The add expectation command already holds a reference to the master
conntrack from ctnetlink_create_expect().
However, the delete expectation command needs to grab the spinlock
before looking up for the expectation. Expand the existing spinlock
section to address this to cover the expectation lookup. Note that,
the nf_ct_expect_iterate_net() calls already grabs the spinlock while
iterating over the expectation table, which is correct.
The get expectation command needs to grab the spinlock to ensure master
conntrack does not go away. This also expands the existing spinlock
section to cover the expectation lookup too. I needed to move the
netlink skb allocation out of the spinlock to keep it GFP_KERNEL.
For the expectation events, the IPEXP_DESTROY event is already delivered
under the spinlock, just move the delivery of IPEXP_NEW under the
spinlock too because the master conntrack event cache is reached through
exp->master.
While at it, add lockdep notations to help identify what codepaths need
to grab the spinlock.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
The expectation helper field is mostly unused. As a result, the
netfilter codebase relies on accessing the helper through exp->master.
Always set on the expectation helper field so it can be used to reach
the helper.
nf_ct_expect_init() is called from packet path where the skb owns
the ct object, therefore accessing exp->master for the newly created
expectation is safe. This saves a lot of updates in all callsites
to pass the ct object as parameter to nf_ct_expect_init().
This is a preparation patches for follow up fixes.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
When codel_dequeue() finds an empty queue, it resets vars->dropping
but does not reset vars->first_above_time. The reference CoDel
algorithm (Nichols & Jacobson, ACM Queue 2012) resets both:
dodeque_result codel_queue_t::dodeque(time_t now) {
...
if (r.p == NULL) {
first_above_time = 0; // <-- Linux omits this
}
...
}
Note that codel_should_drop() does reset first_above_time when called
with a NULL skb, but codel_dequeue() returns early before ever calling
codel_should_drop() in the empty-queue case. The post-drop code paths
do reach codel_should_drop(NULL) and correctly reset the timer, so a
dropped packet breaks the cycle -- but the next delivered packet
re-arms first_above_time and the cycle repeats.
For sparse flows such as ICMP ping (one packet every 200ms-1s), the
first packet arms first_above_time, the flow goes empty, and the
second packet arrives after the interval has elapsed and gets dropped.
The pattern repeats, producing sustained loss on flows that are not
actually congested.
Test: veth pair, fq_codel, BQL disabled, 30000 iptables rules in the
consumer namespace (NAPI-64 cycle ~14ms, well above fq_codel's 5ms
target), ping at 5 pps under UDP flood:
Before fix: 26% ping packet loss
After fix: 0% ping packet loss
Fix by resetting first_above_time to zero in the empty-queue path
of codel_dequeue(), matching the reference algorithm.
Fixes: 76e3cc126bb2 ("codel: Controlled Delay AQM")
Fixes: d068ca2ae2e6 ("codel: split into multiple files")
Co-developed-by: Jesper Dangaard Brouer <hawk@kernel.org>
Signed-off-by: Jesper Dangaard Brouer <hawk@kernel.org>
Signed-off-by: Jonas Köppeler <j.koeppeler@tu-berlin.de>
Reported-by: Chris Arges <carges@cloudflare.com>
Tested-by: Jonas Köppeler <j.koeppeler@tu-berlin.de>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/all/20260318134826.1281205-7-hawk@kernel.org/
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260323174920.253526-1-hawk@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec
Steffen Klassert says:
====================
pull request (net): ipsec 2026-03-23
1) Add missing extack for XFRMA_SA_PCPU in add_acquire and allocspi.
From Sabrina Dubroca.
2) Fix the condition on x->pcpu_num in xfrm_sa_len by using the
proper check. From Sabrina Dubroca.
3) Call xdo_dev_state_delete during state update to properly cleanup
the xdo device state. From Sabrina Dubroca.
4) Fix a potential skb leak in espintcp when async crypto is used.
From Sabrina Dubroca.
5) Validate inner IPv4 header length in IPTFS payload to avoid
parsing malformed packets. From Roshan Kumar.
6) Fix skb_put() panic on non-linear skb during IPTFS reassembly.
From Fernando Fernandez Mancera.
7) Silence various sparse warnings related to RCU, state, and policy
handling. From Sabrina Dubroca.
8) Fix work re-schedule race after cancel in xfrm_nat_keepalive_net_fini().
From Hyunwoo Kim.
9) Prevent policy_hthresh.work from racing with netns teardown by using
a proper cleanup mechanism. From Minwoo Ra.
10) Validate that the family of the source and destination addresses match
in pfkey_send_migrate(). From Eric Dumazet.
11) Only publish mode_data after the clone is setup in the IPTFS receive path.
This prevents leaving x->mode_data pointing at freed memory on error.
From Paul Moses.
Please pull or let me know if there are problems.
ipsec-2026-03-23
* tag 'ipsec-2026-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec:
xfrm: iptfs: only publish mode_data after clone setup
af_key: validate families in pfkey_send_migrate()
xfrm: prevent policy_hthresh.work from racing with netns teardown
xfrm: Fix work re-schedule after cancel in xfrm_nat_keepalive_net_fini()
xfrm: avoid RCU warnings around the per-netns netlink socket
xfrm: add rcu_access_pointer to silence sparse warning for xfrm_input_afinfo
xfrm: policy: silence sparse warning in xfrm_policy_unregister_afinfo
xfrm: policy: fix sparse warnings in xfrm_policy_{init,fini}
xfrm: state: silence sparse warnings during netns exit
xfrm: remove rcu/state_hold from xfrm_state_lookup_spi_proto
xfrm: state: add xfrm_state_deref_prot to state_by* walk under lock
xfrm: state: fix sparse warnings around XFRM_STATE_INSERT
xfrm: state: fix sparse warnings in xfrm_state_init
xfrm: state: fix sparse warnings on xfrm_state_hold_rcu
xfrm: iptfs: fix skb_put() panic on non-linear skb during reassembly
xfrm: iptfs: validate inner IPv4 header length in IPTFS payload
esp: fix skb leak with espintcp and async crypto
xfrm: call xdo_dev_state_delete during state update
xfrm: fix the condition on x->pcpu_num in xfrm_sa_len
xfrm: add missing extack for XFRMA_SA_PCPU in add_acquire and allocspi
====================
Link: https://patch.msgid.link/20260323083440.2741292-1-steffen.klassert@secunet.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When binding a udp_sock to a local address and port, UDP uses
two hashes (udptable->hash and udptable->hash2) for collision
detection. The current code switches to "hash2" when
hslot->count > 10.
"hash2" is keyed by local address and local port.
"hash" is keyed by local port only.
The issue can be shown in the following bind sequence (pseudo code):
bind(fd1, "[fd00::1]:8888")
bind(fd2, "[fd00::2]:8888")
bind(fd3, "[fd00::3]:8888")
bind(fd4, "[fd00::4]:8888")
bind(fd5, "[fd00::5]:8888")
bind(fd6, "[fd00::6]:8888")
bind(fd7, "[fd00::7]:8888")
bind(fd8, "[fd00::8]:8888")
bind(fd9, "[fd00::9]:8888")
bind(fd10, "[fd00::10]:8888")
/* Correctly return -EADDRINUSE because "hash" is used
* instead of "hash2". udp_lib_lport_inuse() detects the
* conflict.
*/
bind(fail_fd, "[::]:8888")
/* After one more socket is bound to "[fd00::11]:8888",
* hslot->count exceeds 10 and "hash2" is used instead.
*/
bind(fd11, "[fd00::11]:8888")
bind(fail_fd, "[::]:8888") /* succeeds unexpectedly */
The same issue applies to the IPv4 wildcard address "0.0.0.0"
and the IPv4-mapped wildcard address "::ffff:0.0.0.0". For
example, if there are existing sockets bound to
"192.168.1.[1-11]:8888", then binding "0.0.0.0:8888" or
"[::ffff:0.0.0.0]:8888" can also miss the conflict when
hslot->count > 10.
TCP inet_csk_get_port() already has the correct check in
inet_use_bhash2_on_bind(). Rename it to
inet_use_hash2_on_bind() and move it to inet_hashtables.h
so udp.c can reuse it in this fix.
Fixes: 30fff9231fad ("udp: bind() optimisation")
Reported-by: Andrew Onyshchuk <oandrew@meta.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260319181817.1901357-1-martin.lau@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The cited commit mechanically put fib6_remove_gc_list()
just after every fib6_clean_expires() call.
When a temporary route is promoted to a permanent route,
there may already be exception routes tied to it.
If fib6_remove_gc_list() removes the route from tb6_gc_hlist,
such exception routes will no longer be aged.
Let's replace fib6_remove_gc_list() with a new helper
fib6_may_remove_gc_list() and use fib6_age_exceptions() there.
Note that net->ipv6 is only compiled when CONFIG_IPV6 is
enabled, so fib6_{add,remove,may_remove}_gc_list() are guarded.
Fixes: 5eb902b8e719 ("net/ipv6: Remove expired routes with a separated list of routes.")
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20260320072317.2561779-3-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This attempt to fix regressions caused by reusing ident which apparently
is not handled well on certain stacks causing the stack to not respond to
requests, so instead of simple returning the first unallocated id this
stores the last used tx_ident and then attempt to use the next until all
available ids are exausted and then cycle starting over to 1.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=221120
Link: https://bugzilla.kernel.org/show_bug.cgi?id=221177
Fixes: 6c3ea155e5ee ("Bluetooth: L2CAP: Fix not tracking outstanding TX ident")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Tested-by: Christian Eggers <ceggers@arri.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
Just a few updates:
- cfg80211:
- guarantee pmsr work is cancelled
- mac80211:
- reject TDLS operations on non-TDLS stations
- fix crash in AP_VLAN bandwidth change
- fix leak or double-free on some TX preparation
failures
- remove keys needed for beacons _after_ stopping
those
- fix debugfs static branch race
- avoid underflow in inactive time
- fix another NULL dereference in mesh on invalid
frames
- ti/wlcore: avoid infinite realloc loop
* tag 'wireless-2026-03-18' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: mac80211: always free skb on ieee80211_tx_prepare_skb() failure
wifi: wlcore: Return -ENOMEM instead of -EAGAIN if there is not enough headroom
wifi: mac80211: fix NULL deref in mesh_matches_local()
wifi: mac80211: check tdls flag in ieee80211_tdls_oper
wifi: cfg80211: cancel pmsr_free_wk in cfg80211_pmsr_wdev_down
wifi: mac80211: Fix static_branch_dec() underflow for aql_disable.
mac80211: fix crash in ieee80211_chan_bw_change for AP_VLAN stations
wifi: mac80211: use jiffies_delta_to_msecs() for sta_info inactive times
wifi: mac80211: remove keys after disabling beaconing
wifi: mac80211_hwsim: fully initialise PMSR capabilities
====================
Link: https://patch.msgid.link/20260318172515.381148-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When CONFIG_IPV6 is disabled, the udp_sock_create6() function returns 0
(success) without actually creating a socket. Callers such as
fou_create() then proceed to dereference the uninitialized socket
pointer, resulting in a NULL pointer dereference.
The captured NULL deref crash:
BUG: kernel NULL pointer dereference, address: 0000000000000018
RIP: 0010:fou_nl_add_doit (net/ipv4/fou_core.c:590 net/ipv4/fou_core.c:764)
[...]
Call Trace:
<TASK>
genl_family_rcv_msg_doit.constprop.0 (net/netlink/genetlink.c:1114)
genl_rcv_msg (net/netlink/genetlink.c:1194 net/netlink/genetlink.c:1209)
[...]
netlink_rcv_skb (net/netlink/af_netlink.c:2550)
genl_rcv (net/netlink/genetlink.c:1219)
netlink_unicast (net/netlink/af_netlink.c:1319 net/netlink/af_netlink.c:1344)
netlink_sendmsg (net/netlink/af_netlink.c:1894)
__sock_sendmsg (net/socket.c:727 (discriminator 1) net/socket.c:742 (discriminator 1))
__sys_sendto (./include/linux/file.h:62 (discriminator 1) ./include/linux/file.h:83 (discriminator 1) net/socket.c:2183 (discriminator 1))
__x64_sys_sendto (net/socket.c:2213 (discriminator 1) net/socket.c:2209 (discriminator 1) net/socket.c:2209 (discriminator 1))
do_syscall_64 (arch/x86/entry/syscall_64.c:63 (discriminator 1) arch/x86/entry/syscall_64.c:94 (discriminator 1))
entry_SYSCALL_64_after_hwframe (net/arch/x86/entry/entry_64.S:130)
This patch makes udp_sock_create6 return -EPFNOSUPPORT instead, so
callers correctly take their error paths. There is only one caller of
the vulnerable function and only privileged users can trigger it.
Fixes: fd384412e199b ("udp_tunnel: Seperate ipv6 functions into its own file.")
Reported-by: Weiming Shi <bestswngs@gmail.com>
Signed-off-by: Xiang Mei <xmei5@asu.edu>
Link: https://patch.msgid.link/20260317010241.1893893-1-xmei5@asu.edu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ieee80211_tx_prepare_skb() has three error paths, but only two of them
free the skb. The first error path (ieee80211_tx_prepare() returning
TX_DROP) does not free it, while invoke_tx_handlers() failure and the
fragmentation check both do.
Add kfree_skb() to the first error path so all three are consistent,
and remove the now-redundant frees in callers (ath9k, mt76,
mac80211_hwsim) to avoid double-free.
Document the skb ownership guarantee in the function's kdoc.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://patch.msgid.link/20260314065455.2462900-1-nbd@nbd.name
Fixes: 06be6b149f7e ("mac80211: add ieee80211_tx_prepare_skb() helper function")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Fix a use-after-free in the clsact qdisc upon init/destroy rollback asymmetry.
The latter is achieved by first fully initializing a clsact instance, and
then in a second step having a replacement failure for the new clsact qdisc
instance. clsact_init() initializes ingress first and then takes care of the
egress part. This can fail midway, for example, via tcf_block_get_ext(). Upon
failure, the kernel will trigger the clsact_destroy() callback.
Commit 1cb6f0bae504 ("bpf: Fix too early release of tcx_entry") details the
way how the transition is happening. If tcf_block_get_ext on the q->ingress_block
ends up failing, we took the tcx_miniq_inc reference count on the ingress
side, but not yet on the egress side. clsact_destroy() tests whether the
{ingress,egress}_entry was non-NULL. However, even in midway failure on the
replacement, both are in fact non-NULL with a valid egress_entry from the
previous clsact instance.
What we really need to test for is whether the qdisc instance-specific ingress
or egress side previously got initialized. This adds a small helper for checking
the miniq initialization called mini_qdisc_pair_inited, and utilizes that upon
clsact_destroy() in order to fix the use-after-free scenario. Convert the
ingress_destroy() side as well so both are consistent to each other.
Fixes: 1cb6f0bae504 ("bpf: Fix too early release of tcx_entry")
Reported-by: Keenan Dong <keenanat2000@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20260313065531.98639-1-daniel@iogearbox.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Whenever a TEQL devices has a lockless Qdisc as root, qdisc_reset should
be called using the seq_lock to avoid racing with the datapath. Failure
to do so may cause crashes like the following:
[ 238.028993][ T318] BUG: KASAN: double-free in skb_release_data (net/core/skbuff.c:1139)
[ 238.029328][ T318] Free of addr ffff88810c67ec00 by task poc_teql_uaf_ke/318
[ 238.029749][ T318]
[ 238.029900][ T318] CPU: 3 UID: 0 PID: 318 Comm: poc_teql_ke Not tainted 7.0.0-rc3-00149-ge5b31d988a41 #704 PREEMPT(full)
[ 238.029906][ T318] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
[ 238.029910][ T318] Call Trace:
[ 238.029913][ T318] <TASK>
[ 238.029916][ T318] dump_stack_lvl (lib/dump_stack.c:122)
[ 238.029928][ T318] print_report (mm/kasan/report.c:379 mm/kasan/report.c:482)
[ 238.029940][ T318] ? skb_release_data (net/core/skbuff.c:1139)
[ 238.029944][ T318] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
...
[ 238.029957][ T318] ? skb_release_data (net/core/skbuff.c:1139)
[ 238.029969][ T318] kasan_report_invalid_free (mm/kasan/report.c:221 mm/kasan/report.c:563)
[ 238.029979][ T318] ? skb_release_data (net/core/skbuff.c:1139)
[ 238.029989][ T318] check_slab_allocation (mm/kasan/common.c:231)
[ 238.029995][ T318] kmem_cache_free (mm/slub.c:2637 (discriminator 1) mm/slub.c:6168 (discriminator 1) mm/slub.c:6298 (discriminator 1))
[ 238.030004][ T318] skb_release_data (net/core/skbuff.c:1139)
...
[ 238.030025][ T318] sk_skb_reason_drop (net/core/skbuff.c:1256)
[ 238.030032][ T318] pfifo_fast_reset (./include/linux/ptr_ring.h:171 ./include/linux/ptr_ring.h:309 ./include/linux/skb_array.h:98 net/sched/sch_generic.c:827)
[ 238.030039][ T318] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
...
[ 238.030054][ T318] qdisc_reset (net/sched/sch_generic.c:1034)
[ 238.030062][ T318] teql_destroy (./include/linux/spinlock.h:395 net/sched/sch_teql.c:157)
[ 238.030071][ T318] __qdisc_destroy (./include/net/pkt_sched.h:328 net/sched/sch_generic.c:1077)
[ 238.030077][ T318] qdisc_graft (net/sched/sch_api.c:1062 net/sched/sch_api.c:1053 net/sched/sch_api.c:1159)
[ 238.030089][ T318] ? __pfx_qdisc_graft (net/sched/sch_api.c:1091)
[ 238.030095][ T318] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 238.030102][ T318] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 238.030106][ T318] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 238.030114][ T318] tc_get_qdisc (net/sched/sch_api.c:1529 net/sched/sch_api.c:1556)
...
[ 238.072958][ T318] Allocated by task 303 on cpu 5 at 238.026275s:
[ 238.073392][ T318] kasan_save_stack (mm/kasan/common.c:58)
[ 238.073884][ T318] kasan_save_track (mm/kasan/common.c:64 (discriminator 5) mm/kasan/common.c:79 (discriminator 5))
[ 238.074230][ T318] __kasan_slab_alloc (mm/kasan/common.c:369)
[ 238.074578][ T318] kmem_cache_alloc_node_noprof (./include/linux/kasan.h:253 mm/slub.c:4542 mm/slub.c:4869 mm/slub.c:4921)
[ 238.076091][ T318] kmalloc_reserve (net/core/skbuff.c:616 (discriminator 107))
[ 238.076450][ T318] __alloc_skb (net/core/skbuff.c:713)
[ 238.076834][ T318] alloc_skb_with_frags (./include/linux/skbuff.h:1383 net/core/skbuff.c:6763)
[ 238.077178][ T318] sock_alloc_send_pskb (net/core/sock.c:2997)
[ 238.077520][ T318] packet_sendmsg (net/packet/af_packet.c:2926 net/packet/af_packet.c:3019 net/packet/af_packet.c:3108)
[ 238.081469][ T318]
[ 238.081870][ T318] Freed by task 299 on cpu 1 at 238.028496s:
[ 238.082761][ T318] kasan_save_stack (mm/kasan/common.c:58)
[ 238.083481][ T318] kasan_save_track (mm/kasan/common.c:64 (discriminator 5) mm/kasan/common.c:79 (discriminator 5))
[ 238.085348][ T318] kasan_save_free_info (mm/kasan/generic.c:587 (discriminator 1))
[ 238.085900][ T318] __kasan_slab_free (mm/kasan/common.c:287)
[ 238.086439][ T318] kmem_cache_free (mm/slub.c:6168 (discriminator 3) mm/slub.c:6298 (discriminator 3))
[ 238.087007][ T318] skb_release_data (net/core/skbuff.c:1139)
[ 238.087491][ T318] consume_skb (net/core/skbuff.c:1451)
[ 238.087757][ T318] teql_master_xmit (net/sched/sch_teql.c:358)
[ 238.088116][ T318] dev_hard_start_xmit (./include/linux/netdevice.h:5324 ./include/linux/netdevice.h:5333 net/core/dev.c:3871 net/core/dev.c:3887)
[ 238.088468][ T318] sch_direct_xmit (net/sched/sch_generic.c:347)
[ 238.088820][ T318] __qdisc_run (net/sched/sch_generic.c:420 (discriminator 1))
[ 238.089166][ T318] __dev_queue_xmit (./include/net/sch_generic.h:229 ./include/net/pkt_sched.h:121 ./include/net/pkt_sched.h:117 net/core/dev.c:4196 net/core/dev.c:4802)
Workflow to reproduce:
1. Initialize a TEQL topology (dummy0 and ifb0 as slaves, teql0 up).
2. Start multiple sender workers continuously transmitting packets
through teql0 to drive teql_master_xmit().
3. In parallel, repeatedly delete and re-add the root qdisc on
dummy0 and ifb0 via RTNETLINK, forcing frequent teardown and reset activity
(teql_destroy() / qdisc_reset()).
4. After running both workloads concurrently for several iterations,
KASAN reports slab-use-after-free or double-free in the skb free path.
Fix this by moving dev_reset_queue to sch_generic.h and calling it, instead
of qdisc_reset, in teql_destroy since it handles both the lock and lockless
cases correctly for root qdiscs.
Fixes: 96009c7d500e ("sched: replace __QDISC_STATE_RUNNING bit with a spin lock")
Reported-by: Xianrui Dong <keenanat2000@gmail.com>
Tested-by: Xianrui Dong <keenanat2000@gmail.com>
Co-developed-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20260315155422.147256-1-jhs@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If cloning the second stateful expression in the element via GFP_ATOMIC
fails, then the first stateful expression remains in place without being
released.
unreferenced object (percpu) 0x607b97e9cab8 (size 16):
comm "softirq", pid 0, jiffies 4294931867
hex dump (first 16 bytes on cpu 3):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
backtrace (crc 0):
pcpu_alloc_noprof+0x453/0xd80
nft_counter_clone+0x9c/0x190 [nf_tables]
nft_expr_clone+0x8f/0x1b0 [nf_tables]
nft_dynset_new+0x2cb/0x5f0 [nf_tables]
nft_rhash_update+0x236/0x11c0 [nf_tables]
nft_dynset_eval+0x11f/0x670 [nf_tables]
nft_do_chain+0x253/0x1700 [nf_tables]
nft_do_chain_ipv4+0x18d/0x270 [nf_tables]
nf_hook_slow+0xaa/0x1e0
ip_local_deliver+0x209/0x330
Fixes: 563125a73ac3 ("netfilter: nftables: generalize set extension to support for several expressions")
Reported-by: Gurpreet Shergill <giki.shergill@proton.me>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
This reverts commit 648946966a08 ("netfilter: nft_set_rbtree: validate
open interval overlap").
There have been reports of nft failing to laod valid rulesets after this
patch was merged into -stable.
I can reproduce several such problem with recent nft versions, including
nft 1.1.6 which is widely shipped by distributions.
We currently have little choice here.
This commit can be resurrected at some point once the nftables fix that
triggers the false overlap positive has appeared in common distros
(see e83e32c8d1cd ("mnl: restore create element command with large batches" in
nftables.git).
Fixes: 648946966a08 ("netfilter: nft_set_rbtree: validate open interval overlap")
Acked-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
Blamed commits forgot that vxlan/geneve use udp_tunnel[6]_xmit_skb() which
call iptunnel_xmit_stats().
iptunnel_xmit_stats() was assuming tunnels were only using
NETDEV_PCPU_STAT_TSTATS.
@syncp offset in pcpu_sw_netstats and pcpu_dstats is different.
32bit kernels would either have corruptions or freezes if the syncp
sequence was overwritten.
This patch also moves pcpu_stat_type closer to dev->{t,d}stats to avoid
a potential cache line miss since iptunnel_xmit_stats() needs to read it.
Fixes: 6fa6de302246 ("geneve: Handle stats using NETDEV_PCPU_STAT_DSTATS.")
Fixes: be226352e8dc ("vxlan: Handle stats using NETDEV_PCPU_STAT_DSTATS.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Link: https://patch.msgid.link/20260311123110.1471930-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Blamed commit missed that both functions can be called with dev == NULL.
Also add unlikely() hints for these conditions that only fuzzers can hit.
Fixes: 6f1a9140ecda ("net: add xmit recursion limit to tunnel xmit functions")
Signed-off-by: Eric Dumazet <edumazet@google.com>
CC: Weiming Shi <bestswngs@gmail.com>
Link: https://patch.msgid.link/20260312043908.2790803-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
net->xfrm.nlsk is used in 2 types of contexts:
- fully under RCU, with rcu_read_lock + rcu_dereference and a NULL check
- in the netlink handlers, with requests coming from a userspace socket
In the 2nd case, net->xfrm.nlsk is guaranteed to stay non-NULL and the
object is alive, since we can't enter the netns destruction path while
the user socket holds a reference on the netns.
After adding the __rcu annotation to netns_xfrm.nlsk (which silences
sparse warnings in the RCU users and __net_init code), we need to tell
sparse that the 2nd case is safe. Add a helper for that.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
While testing other changes in vng I noticed that
nl_netdev.page_pool_check flakes. This never happens in real CI.
Turns out vng may boot and get to that test in less than a second.
page_pool_detached() records the detach time in seconds, so if
vng is fast enough detach time is set to 0. Other code treats
0 as "not detached". detach_time is only used to report the state
to the user, so it's not a huge deal in practice but let's fix it.
Store the raw ktime_t (nanoseconds) instead. A nanosecond value
of 0 is practically impossible.
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Fixes: 69cb4952b6f6 ("net: page_pool: report when page pool was destroyed")
Link: https://patch.msgid.link/20260310003907.3540019-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Tunnel xmit functions (iptunnel_xmit, ip6tunnel_xmit) lack their own
recursion limit. When a bond device in broadcast mode has GRE tap
interfaces as slaves, and those GRE tunnels route back through the
bond, multicast/broadcast traffic triggers infinite recursion between
bond_xmit_broadcast() and ip_tunnel_xmit()/ip6_tnl_xmit(), causing
kernel stack overflow.
The existing XMIT_RECURSION_LIMIT (8) in the no-qdisc path is not
sufficient because tunnel recursion involves route lookups and full IP
output, consuming much more stack per level. Use a lower limit of 4
(IP_TUNNEL_RECURSION_LIMIT) to prevent overflow.
Add recursion detection using dev_xmit_recursion helpers directly in
iptunnel_xmit() and ip6tunnel_xmit() to cover all IPv4/IPv6 tunnel
paths including UDP encapsulated tunnels (VXLAN, Geneve, etc.).
Move dev_xmit_recursion helpers from net/core/dev.h to public header
include/linux/netdevice.h so they can be used by tunnel code.
BUG: KASAN: stack-out-of-bounds in blake2s.constprop.0+0xe7/0x160
Write of size 32 at addr ffff88810033fed0 by task kworker/0:1/11
Workqueue: mld mld_ifc_work
Call Trace:
<TASK>
__build_flow_key.constprop.0 (net/ipv4/route.c:515)
ip_rt_update_pmtu (net/ipv4/route.c:1073)
iptunnel_xmit (net/ipv4/ip_tunnel_core.c:84)
ip_tunnel_xmit (net/ipv4/ip_tunnel.c:847)
gre_tap_xmit (net/ipv4/ip_gre.c:779)
dev_hard_start_xmit (net/core/dev.c:3887)
sch_direct_xmit (net/sched/sch_generic.c:347)
__dev_queue_xmit (net/core/dev.c:4802)
bond_dev_queue_xmit (drivers/net/bonding/bond_main.c:312)
bond_xmit_broadcast (drivers/net/bonding/bond_main.c:5279)
bond_start_xmit (drivers/net/bonding/bond_main.c:5530)
dev_hard_start_xmit (net/core/dev.c:3887)
__dev_queue_xmit (net/core/dev.c:4841)
ip_finish_output2 (net/ipv4/ip_output.c:237)
ip_output (net/ipv4/ip_output.c:438)
iptunnel_xmit (net/ipv4/ip_tunnel_core.c:86)
gre_tap_xmit (net/ipv4/ip_gre.c:779)
dev_hard_start_xmit (net/core/dev.c:3887)
sch_direct_xmit (net/sched/sch_generic.c:347)
__dev_queue_xmit (net/core/dev.c:4802)
bond_dev_queue_xmit (drivers/net/bonding/bond_main.c:312)
bond_xmit_broadcast (drivers/net/bonding/bond_main.c:5279)
bond_start_xmit (drivers/net/bonding/bond_main.c:5530)
dev_hard_start_xmit (net/core/dev.c:3887)
__dev_queue_xmit (net/core/dev.c:4841)
ip_finish_output2 (net/ipv4/ip_output.c:237)
ip_output (net/ipv4/ip_output.c:438)
iptunnel_xmit (net/ipv4/ip_tunnel_core.c:86)
ip_tunnel_xmit (net/ipv4/ip_tunnel.c:847)
gre_tap_xmit (net/ipv4/ip_gre.c:779)
dev_hard_start_xmit (net/core/dev.c:3887)
sch_direct_xmit (net/sched/sch_generic.c:347)
__dev_queue_xmit (net/core/dev.c:4802)
bond_dev_queue_xmit (drivers/net/bonding/bond_main.c:312)
bond_xmit_broadcast (drivers/net/bonding/bond_main.c:5279)
bond_start_xmit (drivers/net/bonding/bond_main.c:5530)
dev_hard_start_xmit (net/core/dev.c:3887)
__dev_queue_xmit (net/core/dev.c:4841)
mld_sendpack
mld_ifc_work
process_one_work
worker_thread
</TASK>
Fixes: 745e20f1b626 ("net: add a recursion limit in xmit path")
Reported-by: Xiang Mei <xmei5@asu.edu>
Signed-off-by: Weiming Shi <bestswngs@gmail.com>
Link: https://patch.msgid.link/20260306160133.3852900-2-bestswngs@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The only user of frag_size field in XDP RxQ info is
bpf_xdp_frags_increase_tail(). It clearly expects whole buffer size instead
of DMA write size. Different assumptions in idpf driver configuration lead
to negative tailroom.
To make it worse, buffer sizes are not actually uniform in idpf when
splitq is enabled, as there are several buffer queues, so rxq->rx_buf_size
is meaningless in this case.
Use truesize of the first bufq in AF_XDP ZC, as there is only one. Disable
growing tail for regular splitq.
Fixes: ac8a861f632e ("idpf: prepare structures to support XDP")
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Link: https://patch.msgid.link/20260305111253.2317394-8-larysa.zaremba@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
rxq->frag_size is basically a step between consecutive strictly aligned
frames. In ZC mode, chunk size fits exactly, but if chunks are unaligned,
there is no safe way to determine accessible space to grow tailroom.
Report frag_size to be zero, if chunks are unaligned, chunk_size otherwise.
Fixes: 24ea50127ecf ("xsk: support mbuf on ZC RX")
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Link: https://patch.msgid.link/20260305111253.2317394-3-larysa.zaremba@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Whenever an ife action replace changes the metalist, instead of
replacing the old data on the metalist, the current ife code is appending
the new metadata. Aside from being innapropriate behavior, this may lead
to an unbounded addition of metadata to the metalist which might cause an
out of bounds error when running the encode op:
[ 138.423369][ C1] ==================================================================
[ 138.424317][ C1] BUG: KASAN: slab-out-of-bounds in ife_tlv_meta_encode (net/ife/ife.c:168)
[ 138.424906][ C1] Write of size 4 at addr ffff8880077f4ffe by task ife_out_out_bou/255
[ 138.425778][ C1] CPU: 1 UID: 0 PID: 255 Comm: ife_out_out_bou Not tainted 7.0.0-rc1-00169-gfbdfa8da05b6 #624 PREEMPT(full)
[ 138.425795][ C1] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
[ 138.425800][ C1] Call Trace:
[ 138.425804][ C1] <IRQ>
[ 138.425808][ C1] dump_stack_lvl (lib/dump_stack.c:122)
[ 138.425828][ C1] print_report (mm/kasan/report.c:379 mm/kasan/report.c:48 |
